summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/atheros
AgeCommit message (Collapse)AuthorFilesLines
2021-10-24net: convert users of bitmap_foo() to linkmode_foo()Sean Anderson1-5/+3
This converts instances of bitmap_foo(args..., __ETHTOOL_LINK_MODE_MASK_NBITS) to linkmode_foo(args...) I manually fixed up some lines to prevent them from being excessively long. Otherwise, this change was generated with the following semantic patch: // Generated with // echo linux/linkmode.h > includes // git grep -Flf includes include/ | cut -f 2- -d / | cat includes - \ // | sort | uniq | tee new_includes | wc -l && mv new_includes includes // and repeating until the number stopped going up @i@ @@ ( #include <linux/acpi_mdio.h> | #include <linux/brcmphy.h> | #include <linux/dsa/loop.h> | #include <linux/dsa/sja1105.h> | #include <linux/ethtool.h> | #include <linux/ethtool_netlink.h> | #include <linux/fec.h> | #include <linux/fs_enet_pd.h> | #include <linux/fsl/enetc_mdio.h> | #include <linux/fwnode_mdio.h> | #include <linux/linkmode.h> | #include <linux/lsm_audit.h> | #include <linux/mdio-bitbang.h> | #include <linux/mdio.h> | #include <linux/mdio-mux.h> | #include <linux/mii.h> | #include <linux/mii_timestamper.h> | #include <linux/mlx5/accel.h> | #include <linux/mlx5/cq.h> | #include <linux/mlx5/device.h> | #include <linux/mlx5/driver.h> | #include <linux/mlx5/eswitch.h> | #include <linux/mlx5/fs.h> | #include <linux/mlx5/port.h> | #include <linux/mlx5/qp.h> | #include <linux/mlx5/rsc_dump.h> | #include <linux/mlx5/transobj.h> | #include <linux/mlx5/vport.h> | #include <linux/of_mdio.h> | #include <linux/of_net.h> | #include <linux/pcs-lynx.h> | #include <linux/pcs/pcs-xpcs.h> | #include <linux/phy.h> | #include <linux/phy_led_triggers.h> | #include <linux/phylink.h> | #include <linux/platform_data/bcmgenet.h> | #include <linux/platform_data/xilinx-ll-temac.h> | #include <linux/pxa168_eth.h> | #include <linux/qed/qed_eth_if.h> | #include <linux/qed/qed_fcoe_if.h> | #include <linux/qed/qed_if.h> | #include <linux/qed/qed_iov_if.h> | #include <linux/qed/qed_iscsi_if.h> | #include <linux/qed/qed_ll2_if.h> | #include <linux/qed/qed_nvmetcp_if.h> | #include <linux/qed/qed_rdma_if.h> | #include <linux/sfp.h> | #include <linux/sh_eth.h> | #include <linux/smsc911x.h> | #include <linux/soc/nxp/lpc32xx-misc.h> | #include <linux/stmmac.h> | #include <linux/sunrpc/svc_rdma.h> | #include <linux/sxgbe_platform.h> | #include <net/cfg80211.h> | #include <net/dsa.h> | #include <net/mac80211.h> | #include <net/selftests.h> | #include <rdma/ib_addr.h> | #include <rdma/ib_cache.h> | #include <rdma/ib_cm.h> | #include <rdma/ib_hdrs.h> | #include <rdma/ib_mad.h> | #include <rdma/ib_marshall.h> | #include <rdma/ib_pack.h> | #include <rdma/ib_pma.h> | #include <rdma/ib_sa.h> | #include <rdma/ib_smi.h> | #include <rdma/ib_umem.h> | #include <rdma/ib_umem_odp.h> | #include <rdma/ib_verbs.h> | #include <rdma/iw_cm.h> | #include <rdma/mr_pool.h> | #include <rdma/opa_addr.h> | #include <rdma/opa_port_info.h> | #include <rdma/opa_smi.h> | #include <rdma/opa_vnic.h> | #include <rdma/rdma_cm.h> | #include <rdma/rdma_cm_ib.h> | #include <rdma/rdmavt_cq.h> | #include <rdma/rdma_vt.h> | #include <rdma/rdmavt_qp.h> | #include <rdma/rw.h> | #include <rdma/tid_rdma_defs.h> | #include <rdma/uverbs_ioctl.h> | #include <rdma/uverbs_named_ioctl.h> | #include <rdma/uverbs_std_types.h> | #include <rdma/uverbs_types.h> | #include <soc/mscc/ocelot.h> | #include <soc/mscc/ocelot_ptp.h> | #include <soc/mscc/ocelot_vcap.h> | #include <trace/events/ib_mad.h> | #include <trace/events/rdma_core.h> | #include <trace/events/rdma.h> | #include <trace/events/rpcrdma.h> | #include <uapi/linux/ethtool.h> | #include <uapi/linux/ethtool_netlink.h> | #include <uapi/linux/mdio.h> | #include <uapi/linux/mii.h> ) @depends on i@ expression list args; @@ ( - bitmap_zero(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_zero(args) | - bitmap_copy(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_copy(args) | - bitmap_and(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_and(args) | - bitmap_or(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_or(args) | - bitmap_empty(args, ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_empty(args) | - bitmap_andnot(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_andnot(args) | - bitmap_equal(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_equal(args) | - bitmap_intersects(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_intersects(args) | - bitmap_subset(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_subset(args) ) Add missing linux/mii.h include to mellanox. -DaveM Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-14ethernet: make use of eth_hw_addr_random() where appropriateJakub Kicinski1-1/+1
Number of drivers use eth_random_addr(netdev->dev_addr) thus writing to netdev->dev_addr directly, and not setting the address type. Switch them to eth_hw_addr_random(). @@ expression netdev; @@ - eth_random_addr(netdev->dev_addr); + eth_hw_addr_random(netdev); Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-07ethernet: use of_get_ethdev_address()Jakub Kicinski1-1/+1
Use the new of_get_ethdev_address() helper for the cases where dev->dev_addr is passed in directly as the destination. @@ expression dev, np; @@ - of_get_mac_address(np, dev->dev_addr) + of_get_ethdev_address(np, dev) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05ethernet: use eth_hw_addr_set() for dev->addr_len casesJakub Kicinski6-9/+9
Convert all Ethernet drivers from memcpy(... dev->addr_len) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, dev->addr_len) + eth_hw_addr_set(dev, np) In theory addr_len may not be ETH_ALEN, but we don't expect non-Ethernet devices to live under this directory, and only the following cases of setting addr_len exist: - cxgb4 for mgmt device, and the drivers which set it to ETH_ALEN: s2io, mlx4, vxge. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: use eth_hw_addr_set()Jakub Kicinski1-1/+1
Convert all Ethernet drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27net: atl1c: Fix a function name in print messagesCai Huoqing1-1/+1
Use dma_map_single() instead of pci_map_single(), because the pci function wrappers are not called here. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-16net: atl1e: Make use of the helper function dev_err_probe()Cai Huoqing1-4/+2
When possible use dev_err_probe help to properly deal with the PROBE_DEFER error, the benefit is that DEFER issue will be logged in the devices_deferred debugfs file. And using dev_err_probe() can reduce code size, and simplify the code. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-16net: atl1c: Make use of the helper function dev_err_probe()Cai Huoqing1-4/+2
When possible use dev_err_probe help to properly deal with the PROBE_DEFER error, the benefit is that DEFER issue will be logged in the devices_deferred debugfs file. And using dev_err_probe() can reduce code size, and simplify the code. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann6-6/+6
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08atl1c: fix Mikrotik 10/25G NIC detectionGatis Peisenieks1-0/+5
Since Mikrotik 10/25G NIC MDIO op emulation is not 100% reliable, on rare occasions it can happen that some physical functions of the NIC do not get initialized due to timeouted early MDIO op. This changes the atl1c probe on Mikrotik 10/25G NIC not to depend on MDIO op emulation. Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+1
Trivial conflicts in net/can/isotp.c and tools/testing/selftests/net/mptcp/mptcp_connect.sh scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c to include/linux/ptp_clock_kernel.h in -next so re-apply the fix there. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-11alx: Fix an error handling path in 'alx_probe()'Christophe JAILLET1-0/+1
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: ab69bde6b2e9 ("alx: add a simple AR816x/AR817x device driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-28atl1c: add 4 RX/TX queue support for Mikrotik 10/25G NICGatis Peisenieks3-158/+291
More RX/TX queues on a network card help spread the CPU load among cores and achieve higher overall networking performance. The new Mikrotik 10/25G NIC supports 4 RX and 4 TX queues. TX queues are treated with equal priority. RX queue balancing is fixed based on L2/L3/L4 hash. This adds support for 4 RX/TX queues while maintaining backwards compatibility with older hardware. Simultaneous TX + RX performance on AMD Threadripper 3960X with Mikrotik 10/25G NIC improved from 1.6Mpps to 3.2Mpps per port. Backwards compatiblitiy was verified with AR8151 and AR8131 based NICs. Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-28atl1c: prepare for multiple rx queuesGatis Peisenieks2-61/+57
Move napi and other per queue members into per rx queue struct. Allocate max rx queues that any hw supported by the driver might have. Patch that actually enables multiple rx queues will follow. Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-28atl1c: move tx napi into tpd_ringGatis Peisenieks2-9/+13
To get more performance from using multiple tx queues one needs a per tx queue napi. Move tx napi from per adapter struct into per tx queue struct. Patch that actually enables multiple tx queues will follow. Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-28atl1c: detect NIC type earlyGatis Peisenieks1-29/+27
To support NICs that allow for more than one tx queue it is required to detect NIC type early during probe. This is moves NIC type detection before netdev_alloc to prepare for that. Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-18alx: fix a double unlock in alx_probe()Dan Carpenter1-1/+1
We're not holding the lock at this point so "goto unlock;" should be "goto unmap;" Fixes: 4a5fe57e7751 ("alx: use fine-grained locking instead of RTNL") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-18net: atheros: atl1x: Fix wrong function name in commentsYang Shen1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/atheros/atlx/atl1.c:1020: warning: expecting prototype for atl1_setup_mem_resources(). Prototype was for atl1_setup_ring_resources() instead Cc: Chris Snook <chris.snook@gmail.com> Signed-off-by: Yang Shen <shenyang39@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-18net: atheros: atl1e: Fix wrong function name in commentsYang Shen1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/atheros/atl1e/atl1e_main.c:367: warning: expecting prototype for atl1e_set_mac(). Prototype was for atl1e_set_mac_addr() instead drivers/net/ethernet/atheros/atl1e/atl1e_main.c:796: warning: expecting prototype for atl1e_setup_mem_resources(). Prototype was for atl1e_setup_ring_resources() instead Cc: Chris Snook <chris.snook@gmail.com> Signed-off-by: Yang Shen <shenyang39@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-18net: atheros: atl1c: Fix wrong function name in commentsYang Shen1-3/+3
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/atheros/atl1c/atl1c_main.c:442: warning: expecting prototype for atl1c_set_mac(). Prototype was for atl1c_set_mac_addr() instead drivers/net/ethernet/atheros/atl1c/atl1c_main.c:969: warning: expecting prototype for atl1c_setup_mem_resources(). Prototype was for atl1c_setup_ring_resources() instead drivers/net/ethernet/atheros/atl1c/atl1c_main.c:1375: warning: expecting prototype for atl1c_configure(). Prototype was for atl1c_configure_mac() instead Cc: Chris Snook <chris.snook@gmail.com> Signed-off-by: Yang Shen <shenyang39@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-15alx: fix missing unlock on error in alx_set_pauseparam()Pu Lehui1-1/+3
Add the missing unlock before return from function alx_set_pauseparam() in the error handling case. Fixes: 4a5fe57e7751 ("alx: use fine-grained locking instead of RTNL") Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-14atl1c: improve link detection reliability on Mikrotik 10/25G NICGatis Peisenieks3-18/+27
Mikrotik 10/25G NIC emulates the MDIO accesses, but the emulation is not 100% reliable - the MDIO ops occasionally can timeout. This adds a reliable way of detecting link on Mikrotik 10/25G NIC. Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-14atl1c: enable rx csum offload on Mikrotik 10/25G NICGatis Peisenieks2-0/+7
Mikrotik 10/25G NIC supports hw checksum verification on rx for IP/IPv6 + TCP/UDP packets. HW checksum offload helps reduce host cpu load. This enables the csum offload specifically for Mikrotik 10/25G NIC as other HW supported by the driver is known to have problems with it. TCP iperf3 to Threadripper 3960X with NIC improved 16.5 -> 20.0 Gbps with mtu=1500. Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-14atl1c: adjust max mtu according to Mikrotik 10/25G NIC abilityGatis Peisenieks1-4/+12
The new Mikrotik 10/25G NIC supports jumbo frames. Jumbo frames are supported for TSO as well. This enables the support for mtu up to 9500 bytes. Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-14atl1c: improve performance by avoiding unnecessary pcie writes on xmitGatis Peisenieks1-4/+8
The kernel has xmit_more facility that hints the networking driver xmit path about whether more packets are coming soon. This information can be used to avoid unnecessary expensive PCIe transaction per tx packet. Max TX pps on Mikrotik 10/25G NIC in a Threadripper 3960X system improved from 1150Kpps to 1700Kpps. Testing L2 forwarding on AR8151 hardware did not reveal a measurable increase in latency. Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-14atl1c: show correct link speed on Mikrotik 10/25G NICGatis Peisenieks4-0/+21
The new Mikrotik 10/25G NIC maintains compatibility with existing atl1c driver. However it does have new features. This defines some new register offsets, code for identifying the new type of NIC and correct speed detection for the NIC. Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13alx: use fine-grained locking instead of RTNLJohannes Berg3-29/+76
In the alx driver, all locking depended on the RTNL, but that causes issues with ipconfig ("ip=..." command line) because that waits for the netdev to have a carrier while holding the RTNL, but the alx workers etc. require RTNL, so the carrier won't be set until the RTNL is dropped and can be acquired by alx workers. This causes long delays at boot, as reported by Nikolai Zhubr. Really the only sensible thing to do here is to not use the RTNL for everything, but instead have fine-grained locking for just the driver. Do that, it's not that hard. Reported-by: Nikolai Zhubr <zhubr.2@gmail.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-01net: atheros: nic-devel@qualcomm.com is deadJohannes Berg2-2/+2
Remove it from the MODULE_AUTHOR statements referencing it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-29net: selftest: fix build issue if INET is disabledOleksij Rempel1-1/+1
In case ethernet driver is enabled and INET is disabled, selftest will fail to build. Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: 3e1e58d64c3d ("net: add generic selftest support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210428130947.29649-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-21net: ag71xx: make use of generic NET_SELFTESTS libraryOleksij Rempel2-4/+17
With this patch the ag71xx on Atheros AR9331 will able to run generic net selftests. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-17atl1c: move tx cleanup processing out of interruptGatis Peisenieks2-10/+36
Tx queue cleanup happens in interrupt handler on same core as rx queue processing. Both can take considerable amount of processing in high packet-per-second scenarios. Sending big amounts of packets can stall the rx processing which is unfair and also can lead to out-of-memory condition since __dev_kfree_skb_irq queues the skbs for later kfree in softirq which is not allowed to happen with heavy load in interrupt handler. This puts tx cleanup in its own napi and enables threaded napi to allow the rx/tx queue processing to happen on different cores. The ability to sustain equal amounts of tx/rx traffic increased: from 280Kpps to 1130Kpps on Threadripper 3960X with upcoming Mikrotik 10/25G NIC, from 520Kpps to 850Kpps on Intel i3-3320 with Mikrotik RB44Ge adapter. Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14of: net: pass the dst buffer to of_get_mac_address()Michael Walle1-5/+2
of_get_mac_address() returns a "const void*" pointer to a MAC address. Lately, support to fetch the MAC address by an NVMEM provider was added. But this will only work with platform devices. It will not work with PCI devices (e.g. of an integrated root complex) and esp. not with DSA ports. There is an of_* variant of the nvmem binding which works without devices. The returned data of a nvmem_cell_read() has to be freed after use. On the other hand the return of_get_mac_address() points to some static data without a lifetime. The trick for now, was to allocate a device resource managed buffer which is then returned. This will only work if we have an actual device. Change it, so that the caller of of_get_mac_address() has to supply a buffer where the MAC address is written to. Unfortunately, this will touch all drivers which use the of_get_mac_address(). Usually the code looks like: const char *addr; addr = of_get_mac_address(np); if (!IS_ERR(addr)) ether_addr_copy(ndev->dev_addr, addr); This can then be simply rewritten as: of_get_mac_address(np, ndev->dev_addr); Sometimes is_valid_ether_addr() is used to test the MAC address. of_get_mac_address() already makes sure, it just returns a valid MAC address. Thus we can just test its return code. But we have to be careful if there are still other sources for the MAC address before the of_get_mac_address(). In this case we have to keep the is_valid_ether_addr() call. The following coccinelle patch was used to convert common cases to the new style. Afterwards, I've manually gone over the drivers and fixed the return code variable: either used a new one or if one was already available use that. Mansour Moufid, thanks for that coccinelle patch! <spml> @a@ identifier x; expression y, z; @@ - x = of_get_mac_address(y); + x = of_get_mac_address(y, z); <... - ether_addr_copy(z, x); ...> @@ identifier a.x; @@ - if (<+... x ...+>) {} @@ identifier a.x; @@ if (<+... x ...+>) { ... } - else {} @@ identifier a.x; expression e; @@ - if (<+... x ...+>@e) - {} - else + if (!(e)) {...} @@ expression x, y, z; @@ - x = of_get_mac_address(y, z); + of_get_mac_address(y, z); ... when != x </spml> All drivers, except drivers/net/ethernet/aeroflex/greth.c, were compile-time tested. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08net: atheros: atl2: use module_pci_driver to simplify the codeWei Yongjun1-23/+1
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-05net: ag71xx: Slightly simplify 'ag71xx_rx_packets()'Christophe JAILLET1-2/+2
There is no need to use 'list_for_each_entry_safe' here, as nothing is removed from the list in the 'for' loop. Use 'list_for_each_entry' instead, it is slightly less verbose. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-19atl1c: use napi_alloc_skbSieng Piaw Liew1-11/+17
Using napi_alloc_skb in NAPI context avoids enable/disable IRQs, which increases iperf3 result by a few Mbps. Since napi_alloc_skb() uses NET_IP_ALIGN, convert other alloc methods to the same padding. Tested on Intel Core2 and AMD K10 platforms. Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-19atl1c: switch to napi_gro_receiveSieng Piaw Liew1-1/+1
Changing to napi_gro_receive() improves efficiency significantly. Tested on Intel Core2-based motherboards and iperf3. Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-06ethernet: alx: fix order of calls on resumeJakub Kicinski1-2/+5
netif_device_attach() will unpause the queues so we can't call it before __alx_open(). This went undetected until commit b0999223f224 ("alx: add ability to allocate and free alx_napi structures") but now if stack tries to xmit immediately on resume before __alx_open() we'll crash on the NAPI being null: BUG: kernel NULL pointer dereference, address: 0000000000000198 CPU: 0 PID: 12 Comm: ksoftirqd/0 Tainted: G OE 5.10.0-3-amd64 #1 Debian 5.10.13-1 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77-D3H, BIOS F15 11/14/2013 RIP: 0010:alx_start_xmit+0x34/0x650 [alx] Code: 41 56 41 55 41 54 55 53 48 83 ec 20 0f b7 57 7c 8b 8e b0 0b 00 00 39 ca 72 06 89 d0 31 d2 f7 f1 89 d2 48 8b 84 df RSP: 0018:ffffb09240083d28 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffffa04d80ae7800 RCX: 0000000000000004 RDX: 0000000000000000 RSI: ffffa04d80afa000 RDI: ffffa04e92e92a00 RBP: 0000000000000042 R08: 0000000000000100 R09: ffffa04ea3146700 R10: 0000000000000014 R11: 0000000000000000 R12: ffffa04e92e92100 R13: 0000000000000001 R14: ffffa04e92e92a00 R15: ffffa04e92e92a00 FS: 0000000000000000(0000) GS:ffffa0508f600000(0000) knlGS:0000000000000000 i915 0000:00:02.0: vblank wait timed out on crtc 0 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000198 CR3: 000000004460a001 CR4: 00000000001706f0 Call Trace: dev_hard_start_xmit+0xc7/0x1e0 sch_direct_xmit+0x10f/0x310 Cc: <stable@vger.kernel.org> # 4.9+ Fixes: bc2bebe8de8e ("alx: remove WoL support") Reported-by: Zbynek Michl <zbynek.michl@gmail.com> Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=983595 Signed-off-by: Jakub Kicinski <kuba@kernel.org> Tested-by: Zbynek Michl <zbynek.michl@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-23net: ag71xx: remove unnecessary MTU reservationDENG Qingfang1-3/+1
2 bytes of the MTU are reserved for Atheros DSA tag, but DSA core has already handled that since commit dc0fe7d47f9f. Remove the unnecessary reservation. Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20210218034514.3421-1-dqfext@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-09net: atheros: simplify the return expression of atl2_phy_setup_autoneg_adv()Zheng Yongjun1-7/+1
Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-11-18atl1e: fix error return code in atl1e_probe()Zhang Changzhong1-2/+2
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: a6a5325239c2 ("atl1e: Atheros L1E Gigabit Ethernet driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1605581875-36281-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18atl1c: fix error return code in atl1c_probe()Zhang Changzhong1-2/+2
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 43250ddd75a3 ("atl1c: Atheros L1C Gigabit Ethernet driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1605581721-36028-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-30net: atheros: Remove WARN_ON(in_interrupt())Thomas Gleixner3-4/+0
in_interrupt() is ill defined and does not provide what the name suggests. The usage especially in driver code is deprecated and a tree wide effort to clean up and consolidate the (ab)usage of in_interrupt() and related checks is happening. In this case the check covers only parts of the contexts in which these functions cannot be called. It fails to detect preemption or interrupt disabled invocations. As the functions which are invoked from at*_reinit_locked() contain a broad variety of checks (always enabled or debug option dependent) which cover all invalid conditions already, there is no point in having inconsistent warnings in those drivers. Just remove them. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-26drivers/net/ethernet: clean up mis-targeted commentsJesse Brandeburg4-6/+15
As part of the W=1 cleanups for ethernet, a million [*] driver comments had to be cleaned up to get the W=1 compilation to succeed. This change finally makes the drivers/net/ethernet tree compile with W=1 set on the command line. NOTE: The kernel uses kdoc style (see Documentation/process/kernel-doc.rst) when documenting code, not doxygen or other styles. After this patch the x86_64 build has no warnings from W=1, however scripts/kernel-doc says there are 1545 more warnings in source files, that I need to develop a script to fix in a followup patch. The errors fixed here are all kdoc of a few classes, with a few outliers: In file included from drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c:10: drivers/net/ethernet/qlogic/netxen/netxen_nic.h:1193:18: warning: ‘FW_DUMP_LEVELS’ defined but not used [-Wunused-const-variable=] 1193 | static const u32 FW_DUMP_LEVELS[] = { 0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff }; | ^~~~~~~~~~~~~~ ... repeats 4 times... drivers/net/ethernet/sun/cassini.c:2084:24: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] 2084 | RX_USED_ADD(page, i); drivers/net/ethernet/natsemi/ns83820.c: In function ‘phy_intr’: drivers/net/ethernet/natsemi/ns83820.c:603:6: warning: variable ‘tbisr’ set but not used [-Wunused-but-set-variable] 603 | u32 tbisr, tanar, tanlpar; | ^~~~~ drivers/net/ethernet/natsemi/ns83820.c: In function ‘ns83820_get_link_ksettings’: drivers/net/ethernet/natsemi/ns83820.c:1207:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable] 1207 | u32 cfg, tanar, tbicr; | ^~~~~ drivers/net/ethernet/packetengines/yellowfin.c:1063:18: warning: variable ‘yf_size’ set but not used [-Wunused-but-set-variable] 1063 | int data_size, yf_size; | ^~~~~~~ Normal kdoc fixes: warning: Function parameter or member 'x' not described in 'y' warning: Excess function parameter 'x' description in 'y' warning: Cannot understand <string> on line <NNN> - I thought it was a doc line [*] - ok it wasn't quite a million, but it felt like it. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-12net: ag71xx: add flow control supportOleksij Rempel1-1/+12
Add flow control support. The functionality was tested on AR9331 SoC and confirmed by iperf3 results and HW counters exported over ethtool. Following test configurations was used: iMX6S receiver <--- TL-SG1005D switch <---- AR9331 sender The switch is supporting symmytric flow control: Settings for eth0: Supported ports: [ MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full --->> Link partner advertised pause frame use: Symmetric Link partner advertised auto-negotiation: Yes Link partner advertised FEC modes: Not reported Speed: 100Mb/s Duplex: Full Auto-negotiation: on Port: MII PHYAD: 4 Transceiver: external Link detected: yes The iMX6S system was configured to 10Mbit, to let the switch use flow control: - ethtool -s eth0 speed 10 With flow control disabled on AR9331: - ethtool -A eth0 rx off tx off - iperf3 -u -c 172.17.0.1 -b100M -l1472 -t10 [ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams [ 5] 0.00-10.00 sec 66.2 MBytes 55.5 Mbits/sec 0.000 ms 0/47155 (0%) sender [ 5] 0.00-10.04 sec 11.5 MBytes 9.57 Mbits/sec 1.309 ms 38986/47146 (83%) receiver With flow control enabled on AR9331: - ethtool -A eth0 rx on tx on - iperf3 -u -c 172.17.0.1 -b100M -l1472 -t10 [ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams [ 5] 0.00-10.00 sec 15.1 MBytes 12.6 Mbits/sec 0.000 ms 0/10727 (0%) sender [ 5] 0.00-10.05 sec 11.5 MBytes 9.57 Mbits/sec 1.371 ms 2525/10689 (24%) receiver Similar results are get in opposite direction by introducing extra CPU load on AR9331: - chrt 40 dd if=/dev/zero of=/dev/null & Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-12net: ag71xx: add ethtool supportOleksij Rempel1-0/+147
Add basic ethtool support. The functionality was tested on AR9331 SoC. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25net: atheros: switch from 'pci_' to 'dma_' APIChristophe JAILLET4-77/+88
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'atl1e_setup_ring_resources()' (atl1e_main.c), 'atl1_setup_ring_resources()' (atl1.c) and 'atl2_setup_ring_resources()' (atl2.c) GFP_KERNEL can be used because it can be called from a .ndo_open. 'atl1_setup_ring_resources()' (atl1.c) can also be called from a '.set_ringparam' (see struct ethtool_ops) where sleep is also allowed. Both cases are protected by 'rtnl_lock()' which is a mutex. So these function can sleep. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21net: ag71xx: add missed clk_disable_unprepare in error path of probeHuang Guobin1-1/+2
The ag71xx_mdio_probe() forgets to call clk_disable_unprepare() when of_reset_control_get_exclusive() failed. Add the missed call to fix it. Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Huang Guobin <huangguobin4@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15net: alx: fix race condition in alx_removeZekun Shen1-4/+5
There is a race condition exist during termination. The path is alx_stop and then alx_remove. An alx_schedule_link_check could be called before alx_stop by interrupt handler and invoke alx_link_check later. Alx_stop frees the napis, and alx_remove cancels any pending works. If any of the work is scheduled before termination and invoked before alx_remove, a null-ptr-deref occurs because both expect alx->napis[i]. This patch fix the race condition by moving cancel_work_sync functions before alx_free_napis inside alx_stop. Because interrupt handler can call alx_schedule_link_check again, alx_free_irq is moved before cancel_work_sync calls too. Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-13treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-5/+5
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-05-09net/atheros: remove redundant assignment to variable sizeColin Ian King1-1/+1
The variable size is being assigned with a value that is never read, the assignment is redundant and cab be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>