summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/aurora
AgeCommit message (Collapse)AuthorFilesLines
2016-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+7
Couple conflicts resolved here: 1) In the MACB driver, a bug fix to properly initialize the RX tail pointer properly overlapped with some changes to support variable sized rings. 2) In XGBE we had a "CONFIG_PM" --> "CONFIG_PM_SLEEP" fix overlapping with a reorganization of the driver to support ACPI, OF, as well as PCI variants of the chip. 3) In 'net' we had several probe error path bug fixes to the stmmac driver, meanwhile a lot of this code was cleaned up and reorganized in 'net-next'. 4) The cls_flower classifier obtained a helper function in 'net-next' called __fl_delete() and this overlapped with Daniel Borkamann's bug fix to use RCU for object destruction in 'net'. It also overlapped with Jiri's change to guard the rhashtable_remove_fast() call with a check against tc_skip_sw(). 5) In mlx4, a revert bug fix in 'net' overlapped with some unrelated changes in 'net-next'. 6) In geneve, a stale header pointer after pskb_expand_head() bug fix in 'net' overlapped with a large reorganization of the same code in 'net-next'. Since the 'net-next' code no longer had the bug in question, there was nothing to do other than to simply take the 'net-next' hunks. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30net: ethernet: aurora: nb8800: fix fixed-link phydev leaksJohan Hovold1-2/+7
Make sure to deregister and free any fixed-link PHY registered using of_phy_register_fixed_link() on probe errors and on driver unbind. Fixes: c7dfe3abf40e ("net: ethernet: nb8800: support fixed-link DT node") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net: nb8800: Utilize phy_ethtool_nway_resetFlorian Fainelli1-11/+1
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Mostly simple overlapping changes. For example, David Ahern's adjacency list revamp in 'net-next' conflicted with an adjacency list traversal bug fix in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17net: ethernet: nb8800: fix error return code in nb8800_open()Wei Yongjun1-1/+3
Fix to return error code -ENODEV from the of_phy_connect() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Mans Rullgard <mans@mansr.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17net: ethernet: nb8800: Fix module autoloadJavier Martinez Canillas1-0/+1
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ $ modinfo drivers/net/ethernet/aurora/nb8800.ko | grep alias $ After this patch: $ modinfo drivers/net/ethernet/aurora/nb8800.ko | grep alias alias: of:N*T*Csigma,smp8734-ethernetC* alias: of:N*T*Csigma,smp8734-ethernet alias: of:N*T*Csigma,smp8642-ethernetC* alias: of:N*T*Csigma,smp8642-ethernet alias: of:N*T*Caurora,nb8800C* alias: of:N*T*Caurora,nb8800 Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Mans Rullgard <mans@mansr.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-13net: deprecate eth_change_mtu, remove usageJarod Wilson1-1/+0
With centralized MTU checking, there's nothing productive done by eth_change_mtu that isn't already done in dev_set_mtu, so mark it as deprecated and remove all usage of it in the kernel. All callers have been audited for calls to alloc_etherdev* or ether_setup directly, which means they all have a valid dev->min_mtu and dev->max_mtu. Now eth_change_mtu prints out a netdev_warn about being deprecated, for the benefit of out-of-tree drivers that might be utilizing it. Of note, dvb_net.c actually had dev->mtu = 4096, while using eth_change_mtu, meaning that if you ever tried changing it's mtu, you couldn't set it above 1500 anymore. It's now getting dev->max_mtu also set to 4096 to remedy that. v2: fix up lantiq_etop, missed breakage due to drive not compiling on x86 CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-02ethernet: aurora: nb8800: add missing of_node_put after calling of_parse_phandlePeter Chen1-0/+2
of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Just several instances of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-21net: ethernet: nb8800: fix error handling of nb8800_probe()Wei Yongjun1-1/+1
In ops->reset() error handling case, clk_disable_unprepare() is missed before return from this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Mans Rullgard <mans@mansr.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-17net: nb8800: Fix SKB leak in nb8800_receive()Florian Fainelli1-0/+1
In case nb8800_receive() fails to allocate a fragment, we would leak the SKB freshly allocated and just return, instead, free it. Reported-by: coverity (CID 1341750) Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Mans Rullgard <mans@mansr.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-19net: ethernet: nb8800: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-22/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-by: Mans Rullgard <mans@mansr.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-19net: ethernet: nb8800: use phydev from struct net_devicePhilippe Reynes2-29/+29
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-by: Mans Rullgard <mans@mansr.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-24net: ethernet: nb8800: support fixed-link DT nodeSebastian Frias1-1/+13
Under some circumstances, e.g. when connecting to a switch, the ethernet port will not be connected to a PHY. In that case a "fixed-link" DT node can be used to replace it. https://stackoverflow.com/questions/31046172/device-tree-for-phy-less-connection-to-a-dsa-switch This patch adds support for the "fixed-link" node to the nb8800 driver. Signed-off-by: Sebastian Frias <sf84@laposte.net> Acked-by: Mans Rullgard <mans@mansr.com> Cc: Mason <slash.tmp@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-30net: nb8800: avoid uninitialized variable warningArnd Bergmann1-2/+2
The nb8800_poll() function initializes the 'next' variable in the loop looking for new input data. We know this will be called at least once because 'budget' is a guaranteed to be a positive number when we enter the function, but the compiler doesn't know that and warns when the variable is used later: drivers/net/ethernet/aurora/nb8800.c: In function 'nb8800_poll': drivers/net/ethernet/aurora/nb8800.c:350:21: warning: 'next' may be used uninitialized in this function [-Wmaybe-uninitialized] Changing the 'while() {}' loop to 'do {} while()' makes it obvious to the compiler what is going on so it no longer warns. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mans Rullgard <mans@mansr.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-07ethernet: aurora: AURORA_NB8800 should depend on HAS_DMAGeert Uytterhoeven1-0/+1
If NO_DMA=y: ERROR: "dma_map_single" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_unmap_page" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_sync_single_for_cpu" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_unmap_single" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_alloc_coherent" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_mapping_error" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_map_page" [drivers/net/ethernet/aurora/nb8800.ko] undefined! ERROR: "dma_free_coherent" [drivers/net/ethernet/aurora/nb8800.ko] undefined! Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Mans Rullgard <mans@mansr.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20net: ethernet: add driver for Aurora VLSI NB8800 Ethernet controllerMåns Rullgård4-0/+1889
This adds a driver for the Aurora VLSI NB8800 Ethernet controller. It is an almost complete rewrite of a driver originally found in a Sigma Designs 2.6.22 tree. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: David S. Miller <davem@davemloft.net>