summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
AgeCommit message (Collapse)AuthorFilesLines
2024-02-16i40e: Remove VEB recursionIvan Vecera1-5/+3
The VEB (virtual embedded switch) as a switch element can be connected according datasheet though its uplink to: - Physical port - Port Virtualizer (not used directly by i40e driver but can be present in MFP mode where the physical port is shared between PFs) - No uplink (aka floating VEB) But VEB uplink cannot be connected to another VEB and any attempt to do so results in: "i40e 0000:02:00.0: couldn't add VEB, err -EIO aq_err I40E_AQ_RC_ENOENT" that indicates "the uplink SEID does not point to valid element". Remove this logic from the driver code this way: 1) For debugfs only allow to build floating VEB (uplink_seid == 0) or main VEB (uplink_seid == mac_seid) 2) Do not recurse in i40e_veb_link_event() as no VEB cannot have sub-VEBs 3) Ditto for i40e_veb_rebuild() + simplify the function as we know that the VEB for rebuild can be only the main LAN VEB or some of the floating VEBs 4) In i40e_rebuild() there is no need to check veb->uplink_seid as the possible ones are 0 and MAC SEID 5) In i40e_vsi_release() do not take into account VEBs whose uplink is another VEB as this is not possible 6) Remove veb_idx field from i40e_veb as a VEB cannot have sub-VEBs Tested using i40e debugfs interface: 1) Initial state [root@cnb-03 net-next]# CMD="/sys/kernel/debug/i40e/0000:02:00.0/command" [root@cnb-03 net-next]# echo dump switch > $CMD [root@cnb-03 net-next]# dmesg -c [ 98.440641] i40e 0000:02:00.0: header: 3 reported 3 total [ 98.446053] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 98.452593] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 98.458856] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 2) Add floating VEB [root@cnb-03 net-next]# echo add relay > $CMD [root@cnb-03 net-next]# dmesg -c [ 122.745630] i40e 0000:02:00.0: added relay 162 [root@cnb-03 net-next]# echo dump switch > $CMD [root@cnb-03 net-next]# dmesg -c [ 136.650049] i40e 0000:02:00.0: header: 4 reported 4 total [ 136.655466] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 136.661994] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 136.668264] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 [ 136.674787] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 3) Add VMDQ2 VSI to this new VEB [root@cnb-03 net-next]# dmesg -c [ 168.351763] i40e 0000:02:00.0: added VSI 394 to relay 162 [ 168.374652] enp2s0f0np0v0: NIC Link is Up, 40 Gbps Full Duplex, Flow Control: None [root@cnb-03 net-next]# echo dump switch > $CMD [root@cnb-03 net-next]# dmesg -c [ 195.683204] i40e 0000:02:00.0: header: 5 reported 5 total [ 195.688611] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16 [ 195.695143] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 [ 195.701410] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 195.707935] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 195.714201] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 4) Try to delete the VEB [root@cnb-03 net-next]# echo del relay 162 > $CMD [root@cnb-03 net-next]# dmesg -c [ 239.260901] i40e 0000:02:00.0: deleting relay 162 [ 239.265621] i40e 0000:02:00.0: can't remove VEB 162 with 1 VSIs left 5) Do PF reset and check switch status after rebuild [root@cnb-03 net-next]# echo pfr > $CMD [root@cnb-03 net-next]# echo dump switch > $CMD [root@cnb-03 net-next]# dmesg -c ... [ 272.333655] i40e 0000:02:00.0: header: 5 reported 5 total [ 272.339066] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16 [ 272.345599] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 [ 272.351862] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 272.358387] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 272.364654] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 6) Delete VSI and delete VEB [ 297.199116] i40e 0000:02:00.0: deleting VSI 394 [ 299.807580] i40e 0000:02:00.0: deleting relay 162 [ 309.767905] i40e 0000:02:00.0: header: 3 reported 3 total [ 309.773318] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 309.779845] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 309.786111] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-16i40e: Fix broken support for floating VEBsIvan Vecera1-10/+19
Although the i40e supports so-called floating VEB (VEB without an uplink connection to external network), this support is broken. This functionality is currently unused (except debugfs) but it will be used by subsequent series for switchdev mode slow-path. Fix this by following: 1) Handle correctly floating VEB (VEB with uplink_seid == 0) in i40e_reconstitute_veb() and look for owner VSI and create it only for non-floating VEBs and also set bridge mode only for such VEBs as the floating ones are using always VEB mode. 2) Handle correctly floating VEB in i40e_veb_release() and disallow its release when there are some VSIs. This is different from regular VEB that have owner VSI that is connected to VEB's uplink after VEB deletion by FW. 3) Fix i40e_add_veb() to handle 'vsi' that is NULL for floating VEBs. For floating VEB use 0 for downlink SEID and 'true' for 'default_port' parameters as per datasheet. 4) Fix 'add relay' command in i40e_dbg_command_write() to allow to create floating VEB by 'add relay 0 0' or 'add relay' Tested using debugfs: 1) Initial state [root@host net-next]# echo dump switch > $CMD [root@host net-next]# dmesg -c [ 173.701286] i40e 0000:02:00.0: header: 3 reported 3 total [ 173.706701] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 173.713241] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 173.719507] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 2) Add floating VEB [root@host net-next]# CMD="/sys/kernel/debug/i40e/0000:02:00.0/command" [root@host net-next]# echo add relay > $CMD [root@host net-next]# dmesg -c [ 245.551720] i40e 0000:02:00.0: added relay 162 [root@host net-next]# echo dump switch > $CMD [root@host net-next]# dmesg -c [ 276.984371] i40e 0000:02:00.0: header: 4 reported 4 total [ 276.989779] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 276.996302] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 277.002569] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 [ 277.009091] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 3) Add VMDQ2 VSI to this new VEB [root@host net-next]# echo add vsi 162 > $CMD [root@host net-next]# dmesg -c [ 332.314030] i40e 0000:02:00.0: added VSI 394 to relay 162 [ 332.337486] enp2s0f0np0v0: NIC Link is Up, 40 Gbps Full Duplex, Flow Control: None [root@host net-next]# echo dump switch > $CMD [root@host net-next]# dmesg -c [ 387.284490] i40e 0000:02:00.0: header: 5 reported 5 total [ 387.289904] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16 [ 387.296446] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 [ 387.302708] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 387.309234] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 387.315500] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 4) Try to delete the VEB [root@host net-next]# echo del relay 162 > $CMD [root@host net-next]# dmesg -c [ 428.749297] i40e 0000:02:00.0: deleting relay 162 [ 428.754011] i40e 0000:02:00.0: can't remove VEB 162 with 1 VSIs left 5) Do PF reset and check switch status after rebuild [root@host net-next]# echo pfr > $CMD [root@host net-next]# echo dump switch > $CMD [root@host net-next]# dmesg -c [ 738.056172] i40e 0000:02:00.0: header: 5 reported 5 total [ 738.061577] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16 [ 738.068104] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 [ 738.074367] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 738.080892] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 738.087160] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 6) Delete VSI and delete VEB [root@host net-next]# echo del vsi 394 > $CMD [root@host net-next]# echo del relay 162 > $CMD [root@host net-next]# echo dump switch > $CMD [root@host net-next]# dmesg -c [ 1233.081126] i40e 0000:02:00.0: deleting VSI 394 [ 1239.345139] i40e 0000:02:00.0: deleting relay 162 [ 1244.886920] i40e 0000:02:00.0: header: 3 reported 3 total [ 1244.892328] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 1244.898853] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 1244.905119] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-16i40e: Add helpers to find VSI and VEB by SEID and use themIvan Vecera1-33/+5
Add two helpers i40e_(veb|vsi)_get_by_seid() to find corresponding VEB or VSI by their SEID value and use these helpers to replace existing open-coded loops. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-16i40e: Introduce and use macros for iterating VSIs and VEBsIvan Vecera1-24/+30
Introduce i40e_for_each_vsi() and i40e_for_each_veb() helper macros and use them to iterate relevant arrays. Replace pattern: for (i = 0; i < pf->num_alloc_vsi; i++) by: i40e_for_each_vsi(pf, i, vsi) and pattern: for (i = 0; i < I40E_MAX_VEB; i++) by i40e_for_each_veb(pf, i, veb) These macros also check if array item pf->vsi[i] or pf->veb[i] are not NULL and skip such items so we can remove redundant checks from loop bodies. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-27i40e: Delete unused and useless i40e_pf fieldsIvan Vecera1-3/+0
Removed fields: .fc_autoneg_status Since commit c56999f94876 ("i40e/i40evf: Add set_fc and init of FC settings") write-only and otherwise unused .eeprom_version Write-only and otherwise unused .atr_sample_rate Has only one possible value (I40E_DEFAULT_ATR_SAMPLE_RATE). Remove it and replace its occurrences by I40E_DEFAULT_ATR_SAMPLE_RATE .adminq_work_limit Has only one possible value (I40E_AQ_WORK_LIMIT). Remove it and replace its occurrences by I40E_AQ_WORK_LIMIT .tx_sluggish_count Unused, never written .pf_seid Used to store VSI downlink seid and it is referenced only once in the same codepath. There is no need to save it into i40e_pf. Remove it and use downlink_seid directly in the mentioned log message. .instance Write only. Remove it as well as ugly static local variable 'pfs_found' in i40e_probe. .int_policy .switch_kobj .ptp_pps_work .ptp_extts1_work .ptp_pps_start .pps_delay .ptp_pin .override_q_count All these unused at all Prior the patch: pahole -Ci40e_pf drivers/net/ethernet/intel/i40e/i40e.ko | tail -5 /* size: 5368, cachelines: 84, members: 127 */ /* sum members: 5297, holes: 20, sum holes: 71 */ /* paddings: 6, sum paddings: 19 */ /* last cacheline: 56 bytes */ }; After the patch: pahole -Ci40e_pf drivers/net/ethernet/intel/i40e/i40e.ko | tail -5 /* size: 4976, cachelines: 78, members: 112 */ /* sum members: 4905, holes: 17, sum holes: 71 */ /* paddings: 6, sum paddings: 19 */ /* last cacheline: 48 bytes */ }; Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-15i40e: Delete unused i40e_mac_info fieldsIvan Vecera1-2/+1
From commit 9eed69a9147c ("i40e: Drop FCoE code from core driver files") the field i40e_mac_info.san_addr is unused (never filled). The field i40e_mac_info.max_fcoeq is unused from the beginning. Remove both. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Co-developed-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231113231047.548659-16-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-15i40e: Use DECLARE_BITMAP for flags and hw_features fields in i40e_pfIvan Vecera1-2/+2
Convert flags and hw_features fields from i40e_pf from u32 to bitmaps and their usage to use bit access functions. Changes: - Convert "pf_ptr->(flags|hw_features) & FL" to "test_bit(FL, ...)" - Convert "pf_ptr->(flags|hw_features) |= FL" to "set_bit(FL, ...)" - Convert "pf_ptr->(flags|hw_features) &= ~FL" to "clear_bit(FL, ...)" - Rename flag field to bitno in i40e_priv_flags and adjust ethtool callbacks to work with flags bitmap - Rename flag names where '_ENABLED'->'_ENA' and '_DISABLED'->'_DIS' like in ice driver Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231113231047.548659-7-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-05i40e: Remove circular header dependencies and fix headersIvan Vecera1-1/+2
Similarly as for ice driver [1] there are also circular header dependencies in i40e driver: i40e.h -> i40e_virtchnl_pf.h -> i40e.h Another issue is that i40e header files does not contain their own dependencies on other header files (both private and standard) so their inclusion in .c file require to add these deps in certain order to that .c file to make it compilable. Fix both issues by removal the mentioned circular dependency, by filling i40e headers with their dependencies so they can be placed anywhere in a source code. Additionally remove bunch of includes from i40e.h super header file that are not necessary and include i40e.h only in .c files that really require it. [1] 649c87c6ff52 ("ice: remove circular header dependencies on ice.h") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-08-01i40e: remove i40e_statusJan Sokolowski1-2/+2
Replace uses of i40e_status to as equivalent as possible error codes. Remove enum i40e_status as it is no longer needed Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230728171336.2446156-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-21i40e: Fix an NULL vs IS_ERR() bug for debugfs_create_dir()Wang Ming1-1/+1
The debugfs_create_dir() function returns error pointers. It never returns NULL. Most incorrect error checks were fixed, but the one in i40e_dbg_init() was forgotten. Fix the remaining error check. Fixes: 02e9c290814c ("i40e: debugfs interface") Signed-off-by: Wang Ming <machel@vivo.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-09i40e: use int for i40e_statusJan Sokolowski1-4/+4
To prepare for removal of i40e_status, change the variables from i40e_status to int. This eases the transition when values are changed to return standard int error codes over enum i40e_status. As such changes often also change variable orders, a cleanup is also applied here to make variables conform to RCT and some lines are also reformatted where applicable. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-12i40e: Add tx_stopped statJoe Damato1-2/+3
Track TX queue stop events and export the new stat with ethtool. Signed-off-by: Joe Damato <jdamato@fastly.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-4/+2
net/dsa/dsa2.c commit afb3cc1a397d ("net: dsa: unlock the rtnl_mutex when dsa_master_setup() fails") commit e83d56537859 ("net: dsa: replay master state events in dsa_tree_{setup,teardown}_master") https://lore.kernel.org/all/20220307101436.7ae87da0@canb.auug.org.au/ drivers/net/ethernet/intel/ice/ice.h commit 97b0129146b1 ("ice: Fix error with handling of bonding MTU") commit 43113ff73453 ("ice: add TTY for GNSS module for E810T device") https://lore.kernel.org/all/20220310112843.3233bcf1@canb.auug.org.au/ drivers/staging/gdm724x/gdm_lte.c commit fc7f750dc9d1 ("staging: gdm724x: fix use after free in gdm_lte_rx()") commit 4bcc4249b4cf ("staging: Use netif_rx().") https://lore.kernel.org/all/20220308111043.1018a59d@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-09i40e: stop disabling VFs due to PF error responsesJacob Keller1-4/+2
The i40e_vc_send_msg_to_vf_ex (and its wrapper i40e_vc_send_msg_to_vf) function has logic to detect "failure" responses sent to the VF. If a VF is sent more than I40E_DEFAULT_NUM_INVALID_MSGS_ALLOWED, then the VF is marked as disabled. In either case, a dev_info message is printed stating that a VF opcode failed. This logic originates from the early implementation of VF support in commit 5c3c48ac6bf5 ("i40e: implement virtual device interface"). That commit did not go far enough. The "logic" for this behavior seems to be that error responses somehow indicate a malicious VF. This is not really true. The PF might be sending an error for any number of reasons such as lacking resources, an unsupported operation, etc. This does not indicate a malicious VF. We already have a separate robust malicious VF detection which relies on hardware logic to detect and prevent a variety of behaviors. There is no justification for this behavior in the original implementation. In fact, a later commit 18b7af57d9c1 ("i40e: Lower some message levels") reduced the opcode failure message from a dev_err to a dev_info. In addition, recent commit 01cbf50877e6 ("i40e: Fix to not show opcode msg on unsuccessful VF MAC change") changed the logic to allow quieting it for expected failures. That commit prevented this logic from kicking in for specific circumstances. This change did not go far enough. The behavior is not documented nor is it part of any requirement for our products. Other operating systems such as the FreeBSD implementation of our driver do not include this logic. It is clear this check does not make sense, and causes problems which led to ugly workarounds. Fix this by just removing the entire logic and the need for the i40e_vc_send_msg_to_vf_ex function. Fixes: 01cbf50877e6 ("i40e: Fix to not show opcode msg on unsuccessful VF MAC change") Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-04i40e: Remove unused RX realloc statJoe Damato1-2/+1
After commit 1a557afc4dd5 ("i40e: Refactor receive routine"), rx_stats.realloc_count is no longer being incremented, so remove it. The debugfs string was left, but hardcoded to 0. This is intended to prevent breaking any existing code / scripts that are parsing debugfs for i40e. Signed-off-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-20i40e: fix unsigned stat widthsJoe Damato1-1/+1
Change i40e_update_vsi_stats and struct i40e_vsi to use u64 fields to match the width of the stats counters in struct i40e_rx_queue_stats. Update debugfs code to use the correct format specifier for u64. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Joe Damato <jdamato@fastly.com> Reported-by: kernel test robot <lkp@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-06i40e: Fix NULL pointer dereference in i40e_dbg_dump_descNorbert Zulinski1-0/+8
When trying to dump VFs VSI RX/TX descriptors using debugfs there was a crash due to NULL pointer dereference in i40e_dbg_dump_desc. Added a check to i40e_dbg_dump_desc that checks if VSI type is correct for dumping RX/TX descriptors. Fixes: 02e9c290814c ("i40e: debugfs interface") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+3
Conflicts: MAINTAINERS - keep Chandrasekar drivers/net/ethernet/mellanox/mlx5/core/en_main.c - simple fix + trust the code re-added to param.c in -next is fine include/linux/bpf.h - trivial include/linux/ethtool.h - trivial, fix kdoc while at it include/linux/skmsg.h - move to relevant place in tcp.c, comment re-wrapped net/core/skmsg.c - add the sk = sk // sk = NULL around calls net/tipc/crypto.c - trivial Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-08i40e: Fix sparse error: uninitialized symbol 'ring'Arkadiusz Kubalewski1-0/+3
Init pointer with NULL in default switch case statement. Previously the error was produced when compiling against sparse. i40e_debugfs.c:582 i40e_dbg_dump_desc() error: uninitialized symbol 'ring'. Fixes: 44ea803e2fa7 ("i40e: introduce new dump desc XDP command") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-23intel: clean up mismatched header commentsJesse Brandeburg1-2/+2
A bunch of header comments were showing warnings when compiling with W=1. Fix them all at once. This changes only comments. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-14i40e: use 16B HW descriptors instead of 32BBjörn Töpel1-6/+4
The i40e NIC supports two flavors of HW descriptors, 16 and 32 byte. The latter has, obviously, room for more offloading information. However, the only fields of the 32B HW descriptor that is being used by the driver, is also available in the 16B descriptor. In other words; Reading and writing 32 bytes instead of 16 byte is a waste of bus bandwidth. This commit starts using 16 byte descriptors instead of 32 byte descriptors. For AF_XDP the rx_drop benchmark was improved by 2%. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-07-02i40e: introduce new dump desc XDP commandCiara Loftus1-11/+48
Interfaces already exist for dumping Rx and Tx descriptor information. Introduce another for doing the same for XDP descriptors. Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-07-02i40e: add XDP ring statistics to dump VSI debug outputCiara Loftus1-0/+41
Prior to this, only the Rx and Tx ring statistics were dumped. The XDP ring statistics are now dumped as well. Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-06-26i40e: remove unused definesJesse Brandeburg1-1/+0
Remove all the unused defines as they are just dead weight. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-09i40e: Remove EMPR traces from debugfs facilityMauro S. M. Rodrigues1-4/+0
Since commit '5098850c9b9b ("i40e/i40evf: i40e_register.h updates")' it is no longer possible to trigger an EMP Reset from debugfs, but it's possible to request it either way, to end up with a bad reset request: echo empr > /sys/kernel/debug/i40e/0002\:01\:00.1/command i40e 0002:01:00.1: debugfs: forcing EMPR i40e 0002:01:00.1: bad reset request 0x00010000 So let's remove this piece of code and show the available valid commands as it is when any invalid command is issued. Signed-off-by: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-08-11i40e: no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-18/+4
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: intel-wired-lan@lists.osuosl.org Cc: netdev@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26i40e: Fix descriptor count manipulationMaciej Fijalkowski1-2/+3
Changing descriptor count via 'ethtool -G' is not persistent across resets. When PF reset occurs, we roll back to the default value of vsi->num_desc, which is used then in i40e_alloc_rings to set descriptor count. XDP does a PF reset so when user has changed the descriptor count and load XDP program, the default count will be back there. To fix this: * introduce new VSI members - num_tx_desc and num_rx_desc in favour of num_desc * set them in i40e_set_ringparam to user's values * set them to default values in i40e_set_num_rings_in_vsi only when they don't have previous values Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-05i40e: Use LLDP ethertype define ETH_P_LLDPAnirudh Venkataramanan1-2/+2
Remove references to I40E_ETH_P_LLDP and use ETH_P_LLDP instead. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04i40e: Further implementation of LLDPAleksandr Loktionov1-2/+2
This code implements driver code changes necessary for LLDP Agent support. Modified i40e_aq_start_lldp() and i40e_aq_stop_lldp() adding false parameter whether LLDP state should be persistent across power cycles. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-22i40e: remove debugfs tx_timeout supportLihong Yang1-25/+1
The tx_timeout command from debugfs was originally intended to support early silicon validation efforts. It is no longer needed. Thus remove it to avoid misuse of triggering tx_timeout through debugfs. Signed-off-by: Lihong Yang <lihong.yang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03i40e: Remove unnecessary print statementNathan Chancellor1-2/+0
Clang warns that the address of a pointer will always evaluated as true in a boolean context. drivers/net/ethernet/intel/i40e/i40e_debugfs.c:136:9: warning: address of array 'vsi->active_vlans' will always evaluate to 'true' [-Wpointer-bool-conversion] vsi->active_vlans ? "<valid>" : "<null>"); ~~~~~^~~~~~~~~~~~ ~ ./include/linux/device.h:1431:33: note: expanded from macro 'dev_info' _dev_info(dev, dev_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~ 1 warning generated. Given that the statement shows that active_vlans is always valid, just remove the statement since it's not giving any useful information. Link: https://github.com/ClangBuiltLinux/linux/issues/82 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-30i40e/i40evf: cleanup incorrect function doxygen commentsJacob Keller1-4/+4
Recent versions of the Linux kernel now warn about incorrect parameter definitions for function comments. Fix up several function comments to correctly reflect the current function arguments. This cleans up the warnings and helps ensure our documentation is accurate. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-27net: intel: Cleanup the copyright/license headersJeff Kirsher1-25/+1
After many years of having a ~30 line copyright and license header to our source files, we are finally able to reduce that to one line with the advent of the SPDX identifier. Also caught a few files missing the SPDX license identifier, so fixed them up. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23intel: add SPDX identifiers to all the Intel driversJeff Kirsher1-0/+1
Add the SPDX identifiers to all the Intel wired LAN driver files, as outlined in Documentation/process/license-rules.rst. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-13i40e: don't leak memory addressesMitch Williams1-34/+6
Could a Bad Person do Bad Things to a server if they found these addresses printed in the log? Who knows? But let's not take that risk. Remove pointers from a bunch of printks. In some cases, I was able to adjust the message to indicate whether or not the value was null. In others, I just removed the entire message as there was really no hope of saving it. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-02-12i40e/i40evf: Only track one ITR setting per ring instead of Tx/RxAlexander Duyck1-6/+6
The rings are already split out into Tx and Rx rings so it doesn't make sense to have any single ring store both a Tx and Rx itr_setting value. Since that is the case drop the pair in favor of storing just a single ITR value. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-6/+5
Pull networking updates from David Miller: "Highlights: 1) Maintain the TCP retransmit queue using an rbtree, with 1GB windows at 100Gb this really has become necessary. From Eric Dumazet. 2) Multi-program support for cgroup+bpf, from Alexei Starovoitov. 3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew Lunn. 4) Add meter action support to openvswitch, from Andy Zhou. 5) Add a data meta pointer for BPF accessible packets, from Daniel Borkmann. 6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet. 7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli. 8) More work to move the RTNL mutex down, from Florian Westphal. 9) Add 'bpftool' utility, to help with bpf program introspection. From Jakub Kicinski. 10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper Dangaard Brouer. 11) Support 'blocks' of transformations in the packet scheduler which can span multiple network devices, from Jiri Pirko. 12) TC flower offload support in cxgb4, from Kumar Sanghvi. 13) Priority based stream scheduler for SCTP, from Marcelo Ricardo Leitner. 14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg. 15) Add RED qdisc offloadability, and use it in mlxsw driver. From Nogah Frankel. 16) eBPF based device controller for cgroup v2, from Roman Gushchin. 17) Add some fundamental tracepoints for TCP, from Song Liu. 18) Remove garbage collection from ipv6 route layer, this is a significant accomplishment. From Wei Wang. 19) Add multicast route offload support to mlxsw, from Yotam Gigi" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits) tcp: highest_sack fix geneve: fix fill_info when link down bpf: fix lockdep splat net: cdc_ncm: GetNtbFormat endian fix openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start netem: remove unnecessary 64 bit modulus netem: use 64 bit divide by rate tcp: Namespace-ify sysctl_tcp_default_congestion_control net: Protect iterations over net::fib_notifier_ops in fib_seq_sum() ipv6: set all.accept_dad to 0 by default uapi: fix linux/tls.h userspace compilation error usbnet: ipheth: prevent TX queue timeouts when device not ready vhost_net: conditionally enable tx polling uapi: fix linux/rxrpc.h userspace compilation errors net: stmmac: fix LPI transitioning for dwmac4 atm: horizon: Fix irq release error net-sysfs: trigger netlink notification on ifalias change via sysfs openvswitch: Using kfree_rcu() to simplify the code openvswitch: Make local function ovs_nsh_key_attr_size() static openvswitch: Fix return value check in ovs_meter_cmd_features() ...
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland1-2/+2
to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-13i40e: Add macro for PF reset bitAmritha Nambiar1-2/+1
Introduce a macro for the bit setting the PF reset flag and update its usages. This makes it easier to use this flag in functions to be introduced in future without encountering checkpatch issues related to alignment and line over 80 characters. Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-06i40e/i40evf: use DECLARE_BITMAP for stateJesse Brandeburg1-4/+4
When using set_bit and friends, we should be using actual bitmaps, and fix all the locations where we might access it. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-30i40e: use DECLARE_BITMAP for state fieldsJacob Keller1-5/+8
Instead of assuming our flags fit within an unsigned long, use DECLARE_BITMAP which will ensure that we always allocate enough space. Additionally, use __I40E_STATE_SIZE__ markers as the last element of the enumeration so that the size of the BITMAP is compile-time assigned rather than programmer-time assigned. This ensures that potential future flag additions do not actually overrun the array. This is especially important as 32bit systems would only have 32bit longs instead of 64bit longs as we generally have assumed in the prior code. This change also removes a dereference of the state fields throughout the code, so it does have a bit of code churn. The conversions were automated using sed replacements with an alternation s/&(vsi->back|vsi|pf)->state/\1->state/ s/&adapter->vsi.state/adapter->vsi.state/ For debugfs, we modify the printing so that we can display chunks of the state value on new lines. This ensures that we can print the entire set of state values. Additionally, we now print them as 08lx to ensure that they display nicely. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-30i40e: separate PF and VSI state flagsJacob Keller1-2/+2
Avoid using the same named flags for both vsi->state and pf->state. This makes code review easier, as it is more likely that future authors will use the correct state field when checking bits. Previous commits already found issues with at least one check, and possibly others may be incorrect. This reduces confusion as it is more clear what each flag represents, and which flags are valid for which state field. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-20i40e: dump VF information in debugfsMitch Williams1-0/+51
Dump some internal state about VFs through debugfs. This provides information not available with 'ip link show'. To use, write "dump vf <id>" to the command file, or just "dump vf" to dump information on all of the VFs. Change-ID: Ibe32b7f4ae55d4358c0b903217475f708ada1ecd Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-28i40e: Drop FCoE code from core driver filesAlexander Duyck1-19/+0
Looking over the code for FCoE it looks like the Rx path has been broken at least since the last major Rx refactor almost a year ago. It seems like FCoE isn't supported for any of the Fortville/Fortpark hardware so there isn't much point in carrying the code around, especially if it is broken and untested. Change-ID: I892de8fa551cb129ce2361e738ff82ce55fa229e Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-19i40e: convert to cpu from le16 to generate switch_id correctlyJacob Keller1-2/+3
On Big Endian platforms we would incorrectly calculate the wrong switch id since we did not properly convert the le16 value into CPU format. Caught by sparse. Change-ID: I69a2f9fa064a0a91691f7d0e6fcc206adceb8e36 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-07i40e: use unsigned printf format specifier for active_filters countJacob Keller1-1/+1
Replace the %d specifier used for printing vsi->active_filters and vsi->promisc_threshold with an unsigned %u format specifier. While it is unlikely in practice that these values will ever reach such a large number they are unsigned values and thus should not be interpreted as negative numbers. Change-ID: Iff050fad5a1c8537c4c57fcd527441cd95cfc0d4 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-11-01i40e: store MAC/VLAN filters in a hash with the MAC Address as keyJacob Keller1-2/+2
Replace the mac_filter_list with a static size hash table of 8bits. The primary advantage of this is a decrease in latency of operations related to searching for specific MAC filters, including .set_rx_mode. Using a linked list resulted in several locations which were O(n^2). Using a hash table should give us latency growth closer to O(n*log(n)). Change-ID: I5330bd04053b880e670210933e35830b95948ebb Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
2016-11-01i40e: drop is_vf and is_netdev fields in struct i40e_mac_filterJacob Keller1-85/+3
Originally the is_vf and is_netdev fields were added in order to distinguish between VF and netdev filters in a single VSI. However, it can be noted that we use separate VSI for SRIOV VFs and for netdev VSI. Thus, since a single VSI should only ever have one type of filter, we can simply remove the checks and remove the typing. In a similar fashion, we can note that the only remaining way to get multiple filters of a single type is through a debug command that was added to debugfs. This command is useless in practice, and results in causing bugs if we keep counter tracking but lose the is_vf and is_netdev protections as desired above. Since the only time we'd actually have a counter value besides 0 and 1 is through use of this debugfs hook, we can remove this unnecessary command, and the entire counter logic it required. We vastly simplify mac filters by removing (a) the distinction between VF and netdev filters (b) counting logic (c) the ability to add and remove filters bypassing the stack via debugfs Change-ID: Idf916dd2a1159b1188ddbab5bef6b85ea6bf27d9 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-29i40e: Clean up handling of msglevel flags and debug parameterAlexander Duyck1-19/+0
So the i40e driver had a really convoluted configuration for how to handle the debug flags contained in msg_level. Part of the issue is that the driver has its own 32 bit mask that it was using to track a separate set of debug features. From what I can tell it was trying to use the upper 4 bits to determine if the value was meant to represent a bit-mask or the numeric value provided by debug level. What this patch does is clean this up by compressing those 4 bits into bit 31, as a result we just have to perform a check against the value being negative to determine if we are looking at a debug level (positive), or a debug mask (negative). The debug level will populate the msg_level, and the debug mask will populate the debug_mask in the hardware struct. I added similar logic for ethtool. If the value being provided has bit 31 set we assume the value being provided is a debug mask, otherwise we assume it is a msg_enable mask. For displaying we only provide the msg_enable, and if debug_mask is in use we will print it to the dmesg log. Lastly I removed the debugfs interface. It is redundant with what we already have in ethtool and really doesn't belong anyway. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-25i40e: Strip out debugfs hook for Flow Director filter programmingAlexander Duyck1-80/+0
This interface was only ever meant for debug only. Since it is not supposed to be here we are removing it. Change-ID: Id771a1e5e7d3e2b4b7f56591b61fb48c921e1d04 Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-10 04:43:58 +0300