summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
AgeCommit message (Collapse)AuthorFilesLines
2024-03-06i40e: remove unnecessary qv_info ptr NULL checksAlexey Kodanev1-4/+0
The "qv_info" ptr cannot be NULL when it gets the address of an element of the flexible array "qvlist_info->qv_info". Detected using the static analysis tool - Svace. Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-13i40e: Do not allow untrusted VF to remove administratively set MACIvan Vecera1-5/+33
Currently when PF administratively sets VF's MAC address and the VF is put down (VF tries to delete all MACs) then the MAC is removed from MAC filters and primary VF MAC is zeroed. Do not allow untrusted VF to remove primary MAC when it was set administratively by PF. Reproducer: 1) Create VF 2) Set VF interface up 3) Administratively set the VF's MAC 4) Put VF interface down [root@host ~]# echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs [root@host ~]# ip link set enp2s0f0v0 up [root@host ~]# ip link set enp2s0f0 vf 0 mac fe:6c:b5:da:c7:7d [root@host ~]# ip link show enp2s0f0 23: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 3c:ec:ef:b7:dd:04 brd ff:ff:ff:ff:ff:ff vf 0 link/ether fe:6c:b5:da:c7:7d brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off [root@host ~]# ip link set enp2s0f0v0 down [root@host ~]# ip link show enp2s0f0 23: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 3c:ec:ef:b7:dd:04 brd ff:ff:ff:ff:ff:ff vf 0 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off Fixes: 700bbf6c1f9e ("i40e: allow VF to remove any MAC filter") Fixes: ceb29474bbbc ("i40e: Add support for VF to specify its primary MAC address") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240208180335.1844996-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-4/+30
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt.c e009b2efb7a8 ("bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()") 0f2b21477988 ("bnxt_en: Fix compile error without CONFIG_RFS_ACCEL") https://lore.kernel.org/all/20240105115509.225aa8a2@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-04Merge branch '40GbE' of ↵Jakub Kicinski1-0/+26
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-01-03 (i40e, ice, igc) This series contains updates to i40e, ice, and igc drivers. Ke Xiao fixes use after free for unicast filters on i40e. Andrii restores VF MSI-X flag after PCI reset on i40e. Paul corrects admin queue link status structure to fulfill firmware expectations for ice. Rodrigo Cataldo corrects value used for hicredit calculations on igc. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: igc: Fix hicredit calculation ice: fix Get link status data length i40e: Restore VF MSI-X state during PCI reset i40e: fix use-after-free in i40e_aqc_add_filters() ==================== Link: https://lore.kernel.org/r/20240103193254.822968-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-03i40e: Restore VF MSI-X state during PCI resetAndrii Staikov1-0/+26
During a PCI FLR the MSI-X Enable flag in the VF PCI MSI-X capability register will be cleared. This can lead to issues when a VF is assigned to a VM because in these cases the VF driver receives no indication of the PF PCI error/reset and additionally it is incapable of restoring the cleared flag in the hypervisor configuration space without fully reinitializing the driver interrupt functionality. Since the VF driver is unable to easily resolve this condition on its own, restore the VF MSI-X flag during the PF PCI reset handling. Fixes: 19b7960b2da1 ("i40e: implement split PCI error reset handler") Co-developed-by: Karen Ostrowska <karen.ostrowska@intel.com> Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com> Co-developed-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-03i40e: Fix VF disable behavior to block all trafficAndrii Staikov1-0/+32
Currently, if a VF is disabled using the 'ip link set dev $ETHX vf $VF_NUM state disable' command, the VF is still able to receive traffic. Fix the behavior of the 'ip link set dev $ETHX vf $VF_NUM state disable' to completely shutdown the VF's queues making it entirely disabled and not able to receive or send any traffic. Modify the behavior of the 'ip link set $ETHX vf $VF_NUM state enable' command to make a VF do reinitialization bringing the queues back up. Co-developed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27i40e: Fix filter input checks to prevent config with invalid valuesSudheer Mogilappagari1-4/+4
Prevent VF from configuring filters with unsupported actions or use REDIRECT action with invalid tc number. Current checks could cause out of bounds access on PF side. Fixes: e284fc280473 ("i40e: Add and delete cloud filter") Reviewed-by: Andrii Staikov <andrii.staikov@intel.com> Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-18i40e: field get conversionJesse Brandeburg1-11/+10
Refactor the i40e driver to use FIELD_GET() for mask and shift reads, which reduces lines of code and adds clarity of intent. This code was generated by the following coccinelle/spatch script and then manually repaired. While making one of the conversions, an if() check was inverted to return early and avoid un-necessary indentation of the remainder of the function. In some other cases a stack variable was moved inside the block where it was used while doing cleanups/review. A couple places were changed to use le16_get_bits() instead of FIELD_GET with a le16_to_cpu combination. @get@ constant shift,mask; metavariable type T; expression a; @@ -(((T)(a) & mask) >> shift) +FIELD_GET(mask, a) and applied via: spatch --sp-file field_prep.cocci --in-place --dir \ drivers/net/ethernet/intel/ Cc: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-18i40e: field prep conversionJesse Brandeburg1-5/+3
Refactor i40e driver to use FIELD_PREP(), which reduces lines of code and adds clarity of intent. This code was generated by the following coccinelle/spatch script and then manually repaired. Refactor one function with multiple if's to return quickly to make lines fit in 80 columns. @prep2@ constant shift,mask; type T; expression a; @@ -(((T)(a) << shift) & mask) +FIELD_PREP(mask, a) @prep@ constant shift,mask; type T; expression a; @@ -((T)((a) << shift) & mask) +FIELD_PREP(mask, a) Cc: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-7/+9
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/intel/ice/ice_main.c c9663f79cd82 ("ice: adjust switchdev rebuild path") 7758017911a4 ("ice: restore timestamp configuration after device reset") https://lore.kernel.org/all/20231121211259.3348630-1-anthony.l.nguyen@intel.com/ Adjacent changes: kernel/bpf/verifier.c bb124da69c47 ("bpf: keep track of max number of bpf_loop callback iterations") 5f99f312bd3b ("bpf: add register bounds sanity checks and sanitization") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23i40e: Fix adding unsupported cloud filtersIvan Vecera1-7/+9
If a VF tries to add unsupported cloud filter through virtchnl then i40e_add_del_cloud_filter(_big_buf) returns -ENOTSUPP but this error code is stored in 'ret' instead of 'aq_ret' that is used as error code sent back to VF. In this scenario where one of the mentioned functions fails the value of 'aq_ret' is zero so the VF will incorrectly receive a 'success'. Use 'aq_ret' to store return value and remove 'ret' local variable. Additionally fix the issue when filter allocation fails, in this case no notification is sent back to the VF. Fixes: e284fc280473 ("i40e: Add and delete cloud filter") Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231121211338.3348677-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-15i40e: Consolidate hardware capabilitiesIvan Vecera1-4/+4
Fields .caps in i40e_hw and .hw_features in i40e_pf both indicate capabilities provided by hardware. Move and merge i40e_pf.hw_features into i40e_hw.caps as this is more appropriate place for them and adjust their names to I40E_HW_CAP_... convention. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231113231047.548659-9-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-15i40e: Use DECLARE_BITMAP for flags and hw_features fields in i40e_pfIvan Vecera1-10/+10
Convert flags and hw_features fields from i40e_pf from u32 to bitmaps and their usage to use bit access functions. Changes: - Convert "pf_ptr->(flags|hw_features) & FL" to "test_bit(FL, ...)" - Convert "pf_ptr->(flags|hw_features) |= FL" to "set_bit(FL, ...)" - Convert "pf_ptr->(flags|hw_features) &= ~FL" to "clear_bit(FL, ...)" - Rename flag field to bitno in i40e_priv_flags and adjust ethtool callbacks to work with flags bitmap - Rename flag names where '_ENABLED'->'_ENA' and '_DISABLED'->'_DIS' like in ice driver Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231113231047.548659-7-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-05i40e: Remove circular header dependencies and fix headersIvan Vecera1-0/+2
Similarly as for ice driver [1] there are also circular header dependencies in i40e driver: i40e.h -> i40e_virtchnl_pf.h -> i40e.h Another issue is that i40e header files does not contain their own dependencies on other header files (both private and standard) so their inclusion in .c file require to add these deps in certain order to that .c file to make it compilable. Fix both issues by removal the mentioned circular dependency, by filling i40e headers with their dependencies so they can be placed anywhere in a source code. Additionally remove bunch of includes from i40e.h super header file that are not necessary and include i40e.h only in .c files that really require it. [1] 649c87c6ff52 ("ice: remove circular header dependencies on ice.h") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-10-04i40e: Add rx_missed_errors for buffer exhaustionYajun Deng1-1/+1
As the comment in struct rtnl_link_stats64, rx_dropped should not include packets dropped by the device due to buffer exhaustion. They are counted in rx_missed_errors, procfs folds those two counters together. Add rx_missed_errors for buffer exhaustion, rx_missed_errors corresponds to rx_discards, rx_dropped corresponds to rx_discards_other. Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-15i40e: Fix VF VLAN offloading when port VLAN is configuredIvan Vecera1-3/+5
If port VLAN is configured on a VF then any other VLANs on top of this VF are broken. During i40e_ndo_set_vf_port_vlan() call the i40e driver reset the VF and iavf driver asks PF (using VIRTCHNL_OP_GET_VF_RESOURCES) for VF capabilities but this reset occurs too early, prior setting of vf->info.pvid field and because this field can be zero during i40e_vc_get_vf_resources_msg() then VIRTCHNL_VF_OFFLOAD_VLAN capability is reported to iavf driver. This is wrong because iavf driver should not report VLAN offloading capability when port VLAN is configured as i40e does not support QinQ offloading. Fix the issue by moving VF reset after setting of vf->port_vlan_id field. Without this patch: $ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs $ ip link set enp2s0f0 vf 0 vlan 3 $ ip link set enp2s0f0v0 up $ ip link add link enp2s0f0v0 name vlan4 type vlan id 4 $ ip link set vlan4 up ... $ ethtool -k enp2s0f0v0 | grep vlan-offload rx-vlan-offload: on tx-vlan-offload: on $ dmesg -l err | grep iavf [1292500.742914] iavf 0000:02:02.0: Failed to add VLAN filter, error IAVF_ERR_INVALID_QP_ID With this patch: $ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs $ ip link set enp2s0f0 vf 0 vlan 3 $ ip link set enp2s0f0v0 up $ ip link add link enp2s0f0v0 name vlan4 type vlan id 4 $ ip link set vlan4 up ... $ ethtool -k enp2s0f0v0 | grep vlan-offload rx-vlan-offload: off [requested on] tx-vlan-offload: off [requested on] $ dmesg -l err | grep iavf Fixes: f9b4b6278d51 ("i40e: Reset the VF upon conflicting VLAN configuration") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-08-16virtchnl: fix fake 1-elem arrays for structures allocated as `nents`Alexander Lobakin1-3/+4
Finally, fix 3 structures which are allocated technically correctly, i.e. the calculated size equals to the one that struct_size() would return, except for sizeof(). For &virtchnl_vlan_filter_list_v2, use the same approach when there are no enough space as taken previously for &virtchnl_vlan_filter_list, i.e. let the maximum size be calculated automatically instead of trying to guestimate it using maths. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-08-16virtchnl: fix fake 1-elem arrays in structures allocated as `nents + 1`Alexander Lobakin1-1/+1
There are five virtchnl structures, which are allocated and checked in the code as `nents + 1`, meaning that they always have memory for one excessive element regardless of their actual number. This comes from that their sizeof() includes space for 1 element and then they get allocated via struct_size() or its open-coded equivalents, passing the actual number of elements. Expand virtchnl_struct_size() to handle such structures and replace those 1-elem arrays with proper flex ones. Also fix several places which open-code %IAVF_VIRTCHNL_VF_RESOURCE_SIZE. Finally, let the virtchnl_ether_addr_list size be computed automatically when there's no enough space for the whole list, otherwise we have to open-code reverse struct_size() logics. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-08-01i40e: remove i40e_statusJan Sokolowski1-92/+87
Replace uses of i40e_status to as equivalent as possible error codes. Remove enum i40e_status as it is no longer needed Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230728171336.2446156-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-14i40e: Wait for pending VF reset in VF set callbacksIvan Vecera1-11/+5
Commit 028daf80117376 ("i40e: Fix attach VF to VM issue") fixed a race between i40e_ndo_set_vf_mac() and i40e_reset_vf() during an attachment of VF device to VM. This issue is not related to setting MAC address only but also VLAN assignment to particular VF because the newer libvirt sets configured MAC address as well as an optional VLAN. The same behavior is also for i40e's .ndo_set_vf_rate and .ndo_set_vf_spoofchk where the callbacks just check if the VF was initialized but not wait for the finish of pending reset. Reproducer: [root@host ~]# virsh attach-interface guest hostdev --managed 0000:02:02.0 --mac 52:54:00:b4:aa:bb error: Failed to attach interface error: Cannot set interface MAC/vlanid to 52:54:00:b4:aa:bb/0 for ifname enp2s0f0 vf 0: Resource temporarily unavailable Fix this issue by using i40e_check_vf_init_timeout() helper to check whether a reset of particular VF was finished in i40e's .ndo_set_vf_vlan, .ndo_set_vf_rate and .ndo_set_vf_spoofchk callbacks. Tested-by: Ma Yuying <yuma@redhat.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-14i40e: Add helper for VF inited state check with timeoutIvan Vecera1-16/+33
Move the check for VF inited state (with optional up-to 300ms timeout to separate helper i40e_check_vf_init_timeout() that will be used in the following commit. Tested-by: Ma Yuying <yuma@redhat.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-04-02i40e: Add support for VF to specify its primary MAC addressSylwester Dziedziuch1-4/+70
Currently in the i40e driver there is no implementation of different MAC address handling depending on whether it is a legacy or primary. Introduce new checks for VF to be able to specify its primary MAC address based on the VIRTCHNL_ETHER_ADDR_PRIMARY type. Primary MAC address are treated differently compared to legacy ones in a scenario where: 1. If a unicast MAC is being added and it's specified as VIRTCHNL_ETHER_ADDR_PRIMARY, then replace the current default_lan_addr.addr. 2. If a unicast MAC is being deleted and it's type is specified as VIRTCHNL_ETHER_ADDR_PRIMARY, then zero the hw_lan_addr.addr. Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-09i40e: use ERR_PTR error print in i40e messagesJan Sokolowski1-14/+14
In i40e_status removal patches, i40e_status conversion to strings was removed in order to easily refactor the code to use standard errornums. This however made it more difficult for read error logs. Use %pe formatter to print error messages in human-readable format. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-09i40e: use int for i40e_statusJan Sokolowski1-33/+33
To prepare for removal of i40e_status, change the variables from i40e_status to int. This eases the transition when values are changed to return standard int error codes over enum i40e_status. As such changes often also change variable orders, a cleanup is also applied here to make variables conform to RCT and some lines are also reformatted where applicable. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-09i40e: Remove string printing for i40e_statusJan Sokolowski1-14/+14
Remove the i40e_stat_str() function which prints the string representation of the i40e_status error code. With upcoming changes moving away from i40e_status, there will be no need for this function Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-25virtchnl: i40e/iavf: rename iwarp to rdmaJesse Brandeburg1-31/+32
Since the latest Intel hardware does both IWARP and ROCE, rename the term IWARP in the virtchnl header to be RDMA. Do this for both upper and lower case instances. Many of the non-virtchnl.h changes were done with regular expression replacements using perl like: perl -p -i -e 's/_IWARP/_RDMA/' <files> perl -p -i -e 's/_iwarp/_rdma/' <files> and I had to pick up a few instances manually. The virtchnl.h header has some comments and clarity added around when to use certain defines. note: had to fix a checkpatch warning for a long line by wrapping one of the lines I changed. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jakub Andrysiak <jakub.andrysiak@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-05i40e: Fix for VF MAC address 0Sylwester Dziedziuch1-0/+2
After spawning max VFs on a PF, some VFs were not getting resources and their MAC addresses were 0. This was caused by PF sleeping before flushing HW registers which caused VIRTCHNL_VFR_VFACTIVE to not be set in time for VF. Fix by adding a sleep after hw flush. Fixes: e4b433f4a741 ("i40e: reset all VFs in parallel when rebuilding PF") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-10-26i40e: Fix VF hang when reset is triggered on another VFSylwester Dziedziuch1-11/+32
When a reset was triggered on one VF with i40e_reset_vf global PF state __I40E_VF_DISABLE was set on a PF until the reset finished. If immediately after triggering reset on one VF there is a request to reset on another it will cause a hang on VF side because VF will be notified of incoming reset but the reset will never happen because of this global state, we will get such error message: [ +4.890195] iavf 0000:86:02.1: Never saw reset and VF will hang waiting for the reset to be triggered. Fix this by introducing new VF state I40E_VF_STATE_RESETTING that will be set on a VF if it is currently resetting instead of the global __I40E_VF_DISABLE PF state. Fixes: 3ba9bcb4b68f ("i40e: add locking around VF reset") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20221024100526.1874914-2-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20i40e: Fix VF set max MTU sizeMichal Jaron1-0/+20
Max MTU sent to VF is set to 0 during memory allocation. It cause that max MTU on VF is changed to IAVF_MAX_RXBUFFER and does not depend on data from HW. Set max_mtu field in virtchnl_vf_resource struct to inform VF in GET_VF_RESOURCES msg what size should be max frame. Fixes: dab86afdbbd1 ("i40e/i40evf: Change the way we limit the maximum frame size for Rx") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+4
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-30i40e: Fix VF's MAC Address change on VMNorbert Zulinski1-0/+4
Clear VF MAC from parent PF and remove VF filter from VSI when both conditions are true: -VIRTCHNL_VF_OFFLOAD_USO is not used -VM MAC was not set from PF level It affects older version of IAVF and it allow them to change MAC Address on VM, newer IAVF won't change their behaviour. Previously it wasn't possible to change VF's MAC Address on VM because there is flag on IAVF driver that won't allow to change MAC Address if this address is given from PF driver. Fixes: 155f0ac2c96b ("iavf: allow permanent MAC address to change") Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-09i40e: Fix calculating the number of queue pairsGrzegorz Szczurek1-1/+1
If ADQ is enabled for a VF, then actual number of queue pair is a number of currently available traffic classes for this VF. Without this change the configuration of the Rx/Tx queues fails with error. Fixes: d29e0d233e0d ("i40e: missing input validation on VF message handling by the PF") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-07i40e: Add VF VLAN pruningMateusz Palczewski1-1/+7
VFs by default are able to see all tagged traffic regardless of trust and VLAN filters configured. Add new private flag vf-vlan-pruning that allows changing of default VF behavior for tagged traffic. When the flag is turned on untrusted VF will only be able to receive untagged traffic or traffic with VLAN tags it has created interfaces for The flag is off by default and can only be changed if there are no VFs spawned on the PF. This flag will only be effective when no PVID is set on VF and VF is not trusted. Add new function that computes the correct VLAN ID for VF VLAN filters based on trust, PVID, vf-vlan-prune-disable flag and current VLAN ID. Testing Hints: Test 1: vf-vlan-pruning == off ============================== 1. Set the private flag > ethtool --set-priv-flag eth0 vf-vlan-pruning off (default setting) 2. Use scapy to send any VLAN tagged traffic and make sure the VF receives all VLAN tagged traffic that matches its destination MAC filters (unicast, multicast, and broadcast). Test 2: vf-vlan-pruning == on ============================== 1. Set the private flag > ethtool --set-priv-flag eth0 vf-vlan-pruning on 2. Use scapy to send any VLAN tagged traffic and make sure the VF does not receive any VLAN tagged traffic that matches its destination MAC filters (unicast, multicast, and broadcast). 3. Add a VLAN filter on the VF netdev > ip link add link eth0v0 name vlan10 type vlan id 10 4. Bring the VLAN netdev up > ip link set vlan10 up 4. Use scapy to send traffic with VLAN 10, VLAN 11 (anything not VLAN 10), and untagged traffic. Make sure the VF only receives VLAN 10 and untagged traffic when the link partner is sending. Test 3: vf-vlan-pruning == off && VF is in a port VLAN ============================== 1. Set the private flag > ethtool --set-priv-flag eth0 vf-vlan-pruning off (default setting) 2. Create a VF > echo 1 > sriov_numvfs 3. Put the VF in a port VLAN > ip link set eth0 vf 0 vlan 10 4. Use scapy to send traffic with VLAN 10 and VLAN 11 (anything not VLAN 10) and make sure the VF only receives untagged traffic when the link partner is sending VLAN 10 tagged traffic as the VLAN tag is expected to be stripped by HW for port VLANs and not visible to the VF. Test 4: Change vf-vlan-pruning while VFs are created ============================== echo 0 > sriov_numvfs ethtool --set-priv-flag eth0 vf-vlan-pruning off echo 1 > sriov_numvfs ethtool --set-priv-flag eth0 vf-vlan-pruning on (expect failure) Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-09i40e: stop disabling VFs due to PF error responsesJacob Keller1-50/+7
The i40e_vc_send_msg_to_vf_ex (and its wrapper i40e_vc_send_msg_to_vf) function has logic to detect "failure" responses sent to the VF. If a VF is sent more than I40E_DEFAULT_NUM_INVALID_MSGS_ALLOWED, then the VF is marked as disabled. In either case, a dev_info message is printed stating that a VF opcode failed. This logic originates from the early implementation of VF support in commit 5c3c48ac6bf5 ("i40e: implement virtual device interface"). That commit did not go far enough. The "logic" for this behavior seems to be that error responses somehow indicate a malicious VF. This is not really true. The PF might be sending an error for any number of reasons such as lacking resources, an unsupported operation, etc. This does not indicate a malicious VF. We already have a separate robust malicious VF detection which relies on hardware logic to detect and prevent a variety of behaviors. There is no justification for this behavior in the original implementation. In fact, a later commit 18b7af57d9c1 ("i40e: Lower some message levels") reduced the opcode failure message from a dev_err to a dev_info. In addition, recent commit 01cbf50877e6 ("i40e: Fix to not show opcode msg on unsuccessful VF MAC change") changed the logic to allow quieting it for expected failures. That commit prevented this logic from kicking in for specific circumstances. This change did not go far enough. The behavior is not documented nor is it part of any requirement for our products. Other operating systems such as the FreeBSD implementation of our driver do not include this logic. It is clear this check does not make sense, and causes problems which led to ugly workarounds. Fix this by just removing the entire logic and the need for the i40e_vc_send_msg_to_vf_ex function. Fixes: 01cbf50877e6 ("i40e: Fix to not show opcode msg on unsuccessful VF MAC change") Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-20i40e: Fix for failed to init adminq while VF resetKaren Sornek1-2/+42
Fix for failed to init adminq: -53 while VF is resetting via MAC address changing procedure. Added sync module to avoid reading deadbeef value in reinit adminq during software reset. Without this patch it is possible to trigger VF reset procedure during reinit adminq. This resulted in an incorrect reading of value from the AQP registers and generated the -53 error. Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Karen Sornek <karen.sornek@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-20i40e: Fix issue when maximum queues is exceededJedrzej Jagielski1-0/+59
Before this patch VF interface vanished when maximum queue number was exceeded. Driver tried to add next queues even if there was not enough space. PF sent incorrect number of queues to the VF when there were not enough of them. Add an additional condition introduced to check available space in 'qp_pile' before proceeding. This condition makes it impossible to add queues if they number is greater than the number resulting from available space. Also add the search for free space in PF queue pair piles. Without this patch VF interfaces are not seen when available space for queues has been exceeded and following logs appears permanently in dmesg: "Unable to get VF config (-32)". "VF 62 failed opcode 3, retval: -5" "Unable to get VF config due to PF error condition, not retrying" Fixes: 7daa6bf3294e ("i40e: driver core headers") Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com> Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-07i40e: Add ensurance of MacVlan resources for every trusted VFKaren Sornek1-5/+29
Trusted VF can use up every resource available, leaving nothing to other trusted VFs. Introduce define, which calculates MacVlan resources available based on maximum available MacVlan resources, bare minimum for each VF and number of currently allocated VFs. Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Karen Sornek <karen.sornek@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-05i40e: Fix to not show opcode msg on unsuccessful VF MAC changeMateusz Palczewski1-8/+32
Hide i40e opcode information sent during response to VF in case when untrusted VF tried to change MAC on the VF interface. This is implemented by adding an additional parameter 'hide' to the response sent to VF function that hides the display of error information, but forwards the error code to VF. Previously it was not possible to send response with some error code to VF without displaying opcode information. Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-06i40e: Fix pre-set max number of queues for VFMateusz Palczewski1-5/+0
After setting pre-set combined to 16 queues and reserving 16 queues by tc qdisc, pre-set maximum combined queues returned to default value after VF reset being 4 and this generated errors during removing tc. Fixed by removing clear num_req_queues before reset VF. Fixes: e284fc280473 (i40e: Add and delete cloud filter) Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Bindushree P <Bindushree.p@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-06i40e: Fix failed opcode appearing if handling messages from VFKaren Sornek1-22/+48
Fix failed operation code appearing if handling messages from VF. Implemented by waiting for VF appropriate state if request starts handle while VF reset. Without this patch the message handling request while VF is in a reset state ends with error -5 (I40E_ERR_PARAM). Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Karen Sornek <karen.sornek@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-11-18i40e: Fix warning message and call stack during rmmod i40e driverKaren Sornek1-32/+21
Restore part of reset functionality used when reset is called from the VF to reset itself. Without this fix warning message is displayed when VF is being removed via sysfs. Fix the crash of the VF during reset by ensuring that the PF receives the reset message successfully. Refactor code to use one function instead of two. Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Karen Sornek <karen.sornek@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-11-17i40e: Fix ping is lost after configuring ADq on VFEryk Rybak1-5/+12
Properly reconfigure VF VSIs after VF request ADQ. Created new function to update queue mapping and queue pairs per TC with AQ update VSI. This sets proper RSS size on NIC. VFs num_queue_pairs should not be changed during setup of queue maps. Previously, VF main VSI in ADQ had configured too many queues and had wrong RSS size, which lead to packets not being consumed and drops in connectivity. Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use") Co-developed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-11-17i40e: Fix correct max_pkt_size on VF RX queueEryk Rybak1-44/+9
Setting VLAN port increasing RX queue max_pkt_size by 4 bytes to take VLAN tag into account. Trigger the VF reset when setting port VLAN for VF to renegotiate its capabilities and reinitialize. Fixes: ba4e003d29c1 ("i40e: don't hold spinlock while resetting VF") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-19i40e: improve locking of mac_filter_hashStefan Assmann1-3/+20
i40e_config_vf_promiscuous_mode() calls i40e_getnum_vf_vsi_vlan_filters() without acquiring the mac_filter_hash_lock spinlock. This is unsafe because mac_filter_hash may get altered in another thread while i40e_getnum_vf_vsi_vlan_filters() traverses the hashes. Simply adding the spinlock in i40e_getnum_vf_vsi_vlan_filters() is not possible as it already gets called in i40e_get_vlan_list_sync() with the spinlock held. Therefore adding a wrapper that acquires the spinlock and call the correct function where appropriate. Fixes: 37d318d7805f ("i40e: Remove scheduling while atomic possibility") Fix-suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23i40e: refactor repeated link state reporting codeAleksandr Loktionov1-39/+69
Refactor repeated link state reporting code into a separate helper functions: i40e_set_vf_link_state() i40e_vc_link_speed2mbps(). Add support of VIRTCHNL_VF_CAP_ADV_LINK_SPEED; Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-25i40e: Fix kernel oops when i40e driver removes VF'sEryk Rybak1-0/+9
Fix the reason of kernel oops when i40e driver removed VFs. Added new __I40E_VFS_RELEASING state to signalize releasing process by PF, that it makes possible to exit of reset VF procedure. Without this patch, it is possible to suspend the VFs reset by releasing VFs resources procedure. Retrying the reset after the timeout works on the freed VF memory causing a kernel oops. Fixes: d43d60e5eb95 ("i40e: ensure reset occurs when disabling VF") Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com> Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-02i40e: Revert "i40e: don't report link up for a VF who hasn't enabled queues"Aleksandr Loktionov1-12/+1
This reverts commit 2ad1274fa35ace5c6360762ba48d33b63da2396c VF queues were not brought up when PF was brought up after being downed if the VF driver disabled VFs queues during PF down. This could happen in some older or external VF driver implementations. The problem was that PF driver used vf->queues_enabled as a condition to decide what link-state it would send out which caused the issue. Remove the check for vf->queues_enabled in the VF link notify. Now VF will always be notified of the current link status. Also remove the queues_enabled member from i40e_vf structure as it is not used anymore. Otherwise VNF implementation was broken and caused a link flap. The original commit was a workaround to avoid breaking existing VFs though it's really a fault of the VF code not the PF. The commit should be safe to revert as all of the VFs we know of have been fixed. Also, since we now know there is a related bug in the workaround, removing it is preferred. Fixes: 2ad1274fa35a ("i40e: don't report link up for a VF who hasn't enabled") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-01-26i40e: acquire VSI pointer only after VF is initializedStefan Assmann1-7/+4
This change simplifies the VF initialization check and also minimizes the delay between acquiring the VSI pointer and using it. As known by the commit being fixed, there is a risk of the VSI pointer getting changed. Therefore minimize the delay between getting and using the pointer. Fixes: 9889707b06ac ("i40e: Fix crash caused by stress setting of VF MAC addresses") Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-17i40e: Fix Error I40E_AQ_RC_EINVAL when removing VFsSylwester Dziedziuch1-2/+2
When removing VFs for PF added to bridge there was an error I40E_AQ_RC_EINVAL. It was caused by not properly resetting and reinitializing PF when adding/removing VFs. Changed how reset is performed when adding/removing VFs to properly reinitialize PFs VSI. Fixes: fc60861e9b00 ("i40e: start up in VEPA mode by default") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-10 12:46:29 +0300