summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/micrel
AgeCommit message (Collapse)AuthorFilesLines
2024-01-10Merge tag 'spi-v6.8' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "A moderately busy release for SPI, the main core update was the merging of support for multiple chip selects, used in some flash configurations. There were also big overhauls for the AXI SPI Engine and PL022 drivers, plus some new device support for ST. There's a few patches for other trees, API updates to allow the multiple chip select support and one of the naming modernisations touched a controller embedded in the USB code. - Support for multiple chip selects. - A big overhaul for the AXI SPI engine driver, modernising it and adding a bunch of new features. - Modernisation of the PL022 driver, fixing some issues with submitting messages while in atomic context in the process. - Many drivers were converted to use new APIs which avoid outdated terminology for devices and controllers. - Support for ST Microelectronics STM32F7 and STM32MP25, and Renesas RZ/Five" * tag 'spi-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (83 commits) spi: stm32: add st,stm32mp25-spi compatible supporting STM32MP25 soc dt-bindings: spi: stm32: add st,stm32mp25-spi compatible spi: stm32: use dma_get_slave_caps prior to configuring dma channel spi: axi-spi-engine: fix struct member doc warnings spi: pl022: update description of internal_cs_control() spi: pl022: delete description of cur_msg spi: dw: Remove Intel Thunder Bay SOC support spi: dw: Remove Intel Thunder Bay SOC support spi: sh-msiof: Enforce fixed DTDL for R-Car H3 spi: ljca: switch to use devm_spi_alloc_host() spi: cs42l43: switch to use devm_spi_alloc_host() spi: zynqmp-gqspi: switch to use modern name spi: zynq-qspi: switch to use modern name spi: xtensa-xtfpga: switch to use modern name spi: xlp: switch to use modern name spi: xilinx: switch to use modern name spi: xcomm: switch to use modern name spi: uniphier: switch to use modern name spi: topcliff-pch: switch to use modern name spi: wpcm-fiu: switch to use devm_spi_alloc_host() ...
2023-12-19net: ks8851: Fix TX stall caused by TX buffer overrunRonald Wahl3-25/+40
There is a bug in the ks8851 Ethernet driver that more data is written to the hardware TX buffer than actually available. This is caused by wrong accounting of the free TX buffer space. The driver maintains a tx_space variable that represents the TX buffer space that is deemed to be free. The ks8851_start_xmit_spi() function adds an SKB to a queue if tx_space is large enough and reduces tx_space by the amount of buffer space it will later need in the TX buffer and then schedules a work item. If there is not enough space then the TX queue is stopped. The worker function ks8851_tx_work() dequeues all the SKBs and writes the data into the hardware TX buffer. The last packet will trigger an interrupt after it was send. Here it is assumed that all data fits into the TX buffer. In the interrupt routine (which runs asynchronously because it is a threaded interrupt) tx_space is updated with the current value from the hardware. Also the TX queue is woken up again. Now it could happen that after data was sent to the hardware and before handling the TX interrupt new data is queued in ks8851_start_xmit_spi() when the TX buffer space had still some space left. When the interrupt is actually handled tx_space is updated from the hardware but now we already have new SKBs queued that have not been written to the hardware TX buffer yet. Since tx_space has been overwritten by the value from the hardware the space is not accounted for. Now we have more data queued then buffer space available in the hardware and ks8851_tx_work() will potentially overrun the hardware TX buffer. In many cases it will still work because often the buffer is written out fast enough so that no overrun occurs but for example if the peer throttles us via flow control then an overrun may happen. This can be fixed in different ways. The most simple way would be to set tx_space to 0 before writing data to the hardware TX buffer preventing the queuing of more SKBs until the TX interrupt has been handled. I have chosen a slightly more efficient (and still rather simple) way and track the amount of data that is already queued and not yet written to the hardware. When new SKBs are to be queued the already queued amount of data is honoured when checking free TX buffer space. I tested this with a setup of two linked KS8851 running iperf3 between the two in bidirectional mode. Before the fix I got a stall after some minutes. With the fix I saw now issues anymore after hours. Fixes: 3ba81f3ece3c ("net: Micrel KS8851 SPI network driver") Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Ben Dooks <ben.dooks@codethink.co.uk> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org # 5.10+ Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231214181112.76052-1-rwahl@gmx.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-16treewide, spi: Get rid of SPI_MASTER_HALF_DUPLEXAndy Shevchenko1-2/+2
The SPI_MASTER_HALF_DUPLEX is the legacy name of a definition for a half duplex flag. Since all others had been replaced with the respective SPI_CONTROLLER prefix get rid of the last one as well. There is no functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20231113111249.3982461-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-09-20net: ethernet: micrel: Convert to platform remove callback returning voidUwe Kleine-König2-7/+4
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert these drivers from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-12ksz884x: Remove unused functionsSimon Horman1-294/+0
Remove unused functions. These functions may have some value in documenting the hardware. But that information may be accessed via SCM history. Flagged by clang-16 with W=1. No functional change intended. Compile tested only. Signed-off-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-31net: ksz884x: remove unused change variableTom Rix1-7/+3
clang with W=1 reports drivers/net/ethernet/micrel/ksz884x.c:3216:6: error: variable 'change' set but not used [-Werror,-Wunused-but-set-variable] int change = 0; ^ This variable is not used so remove it. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230329125929.1808420-1-trix@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-26net: ksz884x: fix missing pci_disable_device() on error in pcidev_init()Yang Yingliang1-1/+1
pci_disable_device() need be called while module exiting, switch to use pcim_enable(), pci_disable_device() will be called in pcim_release() while unbinding device. Fixes: 8ca86fd83eae ("net: Micrel KSZ8841/2 PCI Ethernet driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221024131338.2848959-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-15net: ks8851: switch to using gpiod APIDmitry Torokhov2-22/+20
This patch switches the driver away from legacy gpio/of_gpio API to gpiod API, and removes use of of_get_named_gpio_flags() which I want to make private to gpiolib. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220906204922.3789922-2-dmitry.torokhov@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-01net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang2-6/+6
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-24micrel: ksz8851: fixes struct pointer issueJerry Ray1-3/+2
Issue found during code review. This bug has no impact as long as the ks8851_net structure is the first element of the ks8851_net_spi structure. As long as the offset to the ks8851_net struct is zero, the container_of() macro is subtracting 0 and therefore no damage done. But if the ks8851_net_spi struct is ever modified such that the ks8851_net struct within it is no longer the first element of the struct, then the bug would manifest itself and cause problems. struct ks8851_net is contained within ks8851_net_spi. ks is contained within kss. kss is the priv_data of the netdev structure. Signed-off-by: Jerry Ray <jerry.ray@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-06net: micrel: Fix KS8851 KconfigHoratiu Vultur1-0/+1
KS8851 selects MICREL_PHY, which depends on PTP_1588_CLOCK_OPTIONAL, so make KS8851 also depend on PTP_1588_CLOCK_OPTIONAL. Fixes kconfig warning and build errors: WARNING: unmet direct dependencies detected for MICREL_PHY Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && PTP_1588_CLOCK_OPTIONAL [=m] Selected by [y]: - KS8851 [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICREL [=y] && SPI [=y] ld.lld: error: undefined symbol: ptp_clock_register referenced by micrel.c net/phy/micrel.o:(lan8814_probe) in archive drivers/built-in.a ld.lld: error: undefined symbol: ptp_clock_index referenced by micrel.c net/phy/micrel.o:(lan8814_ts_info) in archive drivers/built-in.a Reported-by: kernel test robot <lkp@intel.com> Fixes: ece19502834d ("net: phy: micrel: 1588 support for LAN8814 phy") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220405065936.4105272-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-01net: micrel: fix KS8851_MLL KconfigRandy Dunlap1-0/+1
KS8851_MLL selects MICREL_PHY, which depends on PTP_1588_CLOCK_OPTIONAL, so make KS8851_MLL also depend on PTP_1588_CLOCK_OPTIONAL since 'select' does not follow any dependency chains. Fixes kconfig warning and build errors: WARNING: unmet direct dependencies detected for MICREL_PHY Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && PTP_1588_CLOCK_OPTIONAL [=m] Selected by [y]: - KS8851_MLL [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICREL [=y] && HAS_IOMEM [=y] ld: drivers/net/phy/micrel.o: in function `lan8814_ts_info': micrel.c:(.text+0xb35): undefined reference to `ptp_clock_index' ld: drivers/net/phy/micrel.o: in function `lan8814_probe': micrel.c:(.text+0x2586): undefined reference to `ptp_clock_register' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-17net: ksz884x: optimize netdev_open flow and remove static variablewujunwen1-5/+4
remove the static next_jiffies variable, and reinitialize next_jiffies to simplify netdev_open Signed-off-by: wujunwen <wudaemon@163.com> Link: https://lore.kernel.org/r/20220315122857.78601-1-wudaemon@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-04net: ethernet: Use netif_rx().Sebastian Andrzej Siewior1-1/+1
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Łukasz Stelmach <l.stelmach@samsung.com> Cc: Horatiu Vultur <horatiu.vultur@microchip.com> Cc: UNGLinuxDriver@microchip.com Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09spi: make remove callback a void functionUwe Kleine-König1-3/+1
The value returned by an spi driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Claudius Heine <ch@denx.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-12-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+2
include/net/sock.h commit 8f905c0e7354 ("inet: fully convert sk->sk_rx_dst to RCU rules") commit 43f51df41729 ("net: move early demux fields close to sk_refcnt") https://lore.kernel.org/all/20211222141641.0caa0ab3@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-22net: ks8851: Check for error irqJiasheng Jiang1-0/+2
Because platform_get_irq() could fail and return error irq. Therefore, it might be better to check it if order to avoid the use of error irq. Fixes: 797047f875b5 ("net: ks8851: Implement Parallel bus operations") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen1-1/+5
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18ethernet: use eth_hw_addr_set() in unmaintained driversJakub Kicinski3-7/+14
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18net: ks8851: Make ks8851_remove_common() return voidUwe Kleine-König4-6/+8
Up to now ks8851_remove_common() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of platform and spi remove callbacks is ignored anyway. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-14ethernet: constify references to netdev->dev_addr in driversJakub Kicinski2-3/+3
This big patch sprinkles const on local variables and function arguments which may refer to netdev->dev_addr. Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Some of the changes here are not strictly required - const is sometimes cast off but pointer is not used for writing. It seems like it's still better to add the const in case the code changes later or relevant -W flags get enabled for the build. No functional changes. Link: https://lore.kernel.org/r/20211014142432.449314-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-07ethernet: use of_get_ethdev_address()Jakub Kicinski1-1/+1
Use the new of_get_ethdev_address() helper for the cases where dev->dev_addr is passed in directly as the destination. @@ expression dev, np; @@ - of_get_mac_address(np, dev->dev_addr) + of_get_ethdev_address(np, dev) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05ethernet: use eth_hw_addr_set() for dev->addr_len casesJakub Kicinski1-3/+2
Convert all Ethernet drivers from memcpy(... dev->addr_len) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, dev->addr_len) + eth_hw_addr_set(dev, np) In theory addr_len may not be ETH_ALEN, but we don't expect non-Ethernet devices to live under this directory, and only the following cases of setting addr_len exist: - cxgb4 for mgmt device, and the drivers which set it to ETH_ALEN: s2io, mlx4, vxge. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: use eth_hw_addr_set()Jakub Kicinski2-5/+4
Convert all Ethernet drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-28net: ks8851: fix link errorArnd Bergmann2-4/+10
An object file cannot be built for both loadable module and built-in use at the same time: arm-linux-gnueabi-ld: drivers/net/ethernet/micrel/ks8851_common.o: in function `ks8851_probe_common': ks8851_common.c:(.text+0xf80): undefined reference to `__this_module' Change the ks8851_common code to be a standalone module instead, and use Makefile logic to ensure this is built-in if at least one of its two users is. Fixes: 797047f875b5 ("net: ks8851: Implement Parallel bus operations") Link: https://lore.kernel.org/netdev/20210125121937.3900988-1-arnd@kernel.org/ Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann2-2/+2
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-14net: phy: micrel: move phy reg offsets to common headerMichael Grzeschik1-90/+15
Some micrel devices share the same PHY register defines. This patch moves them to one common header so other drivers can reuse them. And reuse generic MII_* defines where possible. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08net: micrel: check return value after calling platform_get_resource()Yang Yingliang1-0/+4
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-04net: ks8851: Make ks8851_read_selftest() return voidNathan Chancellor1-11/+4
clang points out that ret in ks8851_read_selftest() is set but unused: drivers/net/ethernet/micrel/ks8851_common.c:1028:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] int ret = 0; ^ 1 warning generated. The return code of this function has never been checked so just remove ret and make the function return void. Fixes: 3ba81f3ece3c ("net: Micrel KS8851 SPI network driver") Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-18net: micrel: Fix wrong function name in commentsYang Shen1-3/+3
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/micrel/ksz884x.c:2163: warning: expecting prototype for sw_get_board_storm(). Prototype was for sw_get_broad_storm() instead drivers/net/ethernet/micrel/ksz884x.c:2985: warning: expecting prototype for port_w_phy(). Prototype was for hw_w_phy() instead drivers/net/ethernet/micrel/ksz884x.c:4792: warning: expecting prototype for transmit_done(). Prototype was for tx_done() instead Cc: Tristram Ha <Tristram.Ha@micrel.com> Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14of: net: pass the dst buffer to of_get_mac_address()Michael Walle1-4/+3
of_get_mac_address() returns a "const void*" pointer to a MAC address. Lately, support to fetch the MAC address by an NVMEM provider was added. But this will only work with platform devices. It will not work with PCI devices (e.g. of an integrated root complex) and esp. not with DSA ports. There is an of_* variant of the nvmem binding which works without devices. The returned data of a nvmem_cell_read() has to be freed after use. On the other hand the return of_get_mac_address() points to some static data without a lifetime. The trick for now, was to allocate a device resource managed buffer which is then returned. This will only work if we have an actual device. Change it, so that the caller of of_get_mac_address() has to supply a buffer where the MAC address is written to. Unfortunately, this will touch all drivers which use the of_get_mac_address(). Usually the code looks like: const char *addr; addr = of_get_mac_address(np); if (!IS_ERR(addr)) ether_addr_copy(ndev->dev_addr, addr); This can then be simply rewritten as: of_get_mac_address(np, ndev->dev_addr); Sometimes is_valid_ether_addr() is used to test the MAC address. of_get_mac_address() already makes sure, it just returns a valid MAC address. Thus we can just test its return code. But we have to be careful if there are still other sources for the MAC address before the of_get_mac_address(). In this case we have to keep the is_valid_ether_addr() call. The following coccinelle patch was used to convert common cases to the new style. Afterwards, I've manually gone over the drivers and fixed the return code variable: either used a new one or if one was already available use that. Mansour Moufid, thanks for that coccinelle patch! <spml> @a@ identifier x; expression y, z; @@ - x = of_get_mac_address(y); + x = of_get_mac_address(y, z); <... - ether_addr_copy(z, x); ...> @@ identifier a.x; @@ - if (<+... x ...+>) {} @@ identifier a.x; @@ if (<+... x ...+>) { ... } - else {} @@ identifier a.x; expression e; @@ - if (<+... x ...+>@e) - {} - else + if (!(e)) {...} @@ expression x, y, z; @@ - x = of_get_mac_address(y, z); + of_get_mac_address(y, z); ... when != x </spml> All drivers, except drivers/net/ethernet/aeroflex/greth.c, were compile-time tested. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-16net: ks8851: remove definition of DEBUGTom Rix3-6/+0
Defining DEBUG should only be done in development. So remove DEBUG. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20210115153128.131026-1-trix@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13net: ks8851: Select PHYLIB and MICREL_PHY in KconfigMarek Vasut1-0/+4
The PHYLIB must be selected to provide mdiobus_*() functions, and the MICREL_PHY is necessary too, as that is the only possible PHY attached to the KS8851 (it is the internal PHY). Fixes: ef3631220d2b ("net: ks8851: Register MDIO bus and the internal PHY") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Lukas Wunner <lukas@wunner.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210111125046.36326-1-marex@denx.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-06net: ks8851: Register MDIO bus and the internal PHYMarek Vasut2-16/+98
The KS8851 has a reduced internal PHY, which is accessible through its registers at offset 0xe4. The PHY is compatible with KS886x PHY present in Micrel switches, except the PHY ID Low/High registers are swapped. Register MDIO bus so this PHY can be detected and probed by phylib. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10net: micrel: convert comma to semicolonZheng Yongjun1-1/+1
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-04net: ksz884x: Use fallthrough pseudo-keywordGustavo A. R. Silva1-2/+1
Replace /* Fallthrough... */ comment with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-26drivers/net/ethernet: clean up mis-targeted commentsJesse Brandeburg1-19/+27
As part of the W=1 cleanups for ethernet, a million [*] driver comments had to be cleaned up to get the W=1 compilation to succeed. This change finally makes the drivers/net/ethernet tree compile with W=1 set on the command line. NOTE: The kernel uses kdoc style (see Documentation/process/kernel-doc.rst) when documenting code, not doxygen or other styles. After this patch the x86_64 build has no warnings from W=1, however scripts/kernel-doc says there are 1545 more warnings in source files, that I need to develop a script to fix in a followup patch. The errors fixed here are all kdoc of a few classes, with a few outliers: In file included from drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c:10: drivers/net/ethernet/qlogic/netxen/netxen_nic.h:1193:18: warning: ‘FW_DUMP_LEVELS’ defined but not used [-Wunused-const-variable=] 1193 | static const u32 FW_DUMP_LEVELS[] = { 0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff }; | ^~~~~~~~~~~~~~ ... repeats 4 times... drivers/net/ethernet/sun/cassini.c:2084:24: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] 2084 | RX_USED_ADD(page, i); drivers/net/ethernet/natsemi/ns83820.c: In function ‘phy_intr’: drivers/net/ethernet/natsemi/ns83820.c:603:6: warning: variable ‘tbisr’ set but not used [-Wunused-but-set-variable] 603 | u32 tbisr, tanar, tanlpar; | ^~~~~ drivers/net/ethernet/natsemi/ns83820.c: In function ‘ns83820_get_link_ksettings’: drivers/net/ethernet/natsemi/ns83820.c:1207:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable] 1207 | u32 cfg, tanar, tbicr; | ^~~~~ drivers/net/ethernet/packetengines/yellowfin.c:1063:18: warning: variable ‘yf_size’ set but not used [-Wunused-but-set-variable] 1063 | int data_size, yf_size; | ^~~~~~~ Normal kdoc fixes: warning: Function parameter or member 'x' not described in 'y' warning: Excess function parameter 'x' description in 'y' warning: Cannot understand <string> on line <NNN> - I thought it was a doc line [*] - ok it wasn't quite a million, but it felt like it. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-26drivers/net/ethernet: clean up unused assignmentsJesse Brandeburg1-2/+1
As part of the W=1 compliation series, these lines all created warnings about unused variables that were assigned a value. Most of them are from register reads, but some are just picking up a return value from a function and never doing anything with it. Fixed warnings: .../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable] .../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable] .../ethernet/cortina/gemini.c:512:6: warning: variable ‘val’ set but not used [-Wunused-but-set-variable] .../ethernet/cortina/gemini.c:2110:21: warning: variable ‘config0’ set but not used [-Wunused-but-set-variable] .../ethernet/cavium/liquidio/octeon_device.c:1327:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/cavium/liquidio/octeon_device.c:1358:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/dec/tulip/media.c:322:8: warning: variable ‘setup’ set but not used [-Wunused-but-set-variable] .../ethernet/dec/tulip/de4x5.c:4928:13: warning: variable ‘r3’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:4981:6: warning: variable ‘rx_status’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:6510:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:6087: warning: cannot understand function prototype: 'struct hw_regs ' .../ethernet/microchip/lan743x_main.c:161:6: warning: variable ‘int_en’ set but not used [-Wunused-but-set-variable] .../ethernet/microchip/lan743x_main.c:1702:6: warning: variable ‘int_sts’ set but not used [-Wunused-but-set-variable] .../ethernet/microchip/lan743x_main.c:3041:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] .../ethernet/natsemi/ns83820.c:603:6: warning: variable ‘tbisr’ set but not used [-Wunused-but-set-variable] .../ethernet/natsemi/ns83820.c:1207:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable] .../ethernet/marvell/mvneta.c:754:6: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:33:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:160:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:490:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:2378:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/packetengines/yellowfin.c:1063:18: warning: variable ‘yf_size’ set but not used [-Wunused-but-set-variable] .../ethernet/realtek/8139cp.c:1242:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/mellanox/mlx4/en_tx.c:858:6: warning: variable ‘ring_cons’ set but not used [-Wunused-but-set-variable] .../ethernet/sis/sis900.c:792:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:878:11: warning: variable ‘rx_ev_pkt_type’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:877:23: warning: variable ‘rx_ev_mcast_pkt’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:877:7: warning: variable ‘rx_ev_hdr_type’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:876:7: warning: variable ‘rx_ev_other_err’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:1646:21: warning: variable ‘buftbl_min’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:2535:32: warning: variable ‘spec’ set but not used [-Wunused-but-set-variable] .../ethernet/via/via-velocity.c:880:6: warning: variable ‘curr_status’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/tlan.c:656:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/davinci_emac.c:1230:6: warning: variable ‘num_tx_pkts’ set but not used [-Wunused-but-set-variable] .../ethernet/synopsys/dwc-xlgmac-common.c:516:8: warning: variable ‘str’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/cpsw_new.c:1662:22: warning: variable ‘priv’ set but not used [-Wunused-but-set-variable] The register reads should be OK, because the current implementation of readl and friends will always execute even without an lvalue. When it makes sense, just remove the lvalue assignment and the local. Other times, just remove the offending code, and occasionally, just mark the variable as maybe unused since it could be used in an ifdef or debug scenario. Only compile tested with W=1. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20net: micrel: Remove set but not used variableZheng Yongjun1-6/+4
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/micrel/ksz884x.c: In function rx_proc: drivers/net/ethernet/micrel/ksz884x.c:4981:6: warning: variable ‘rx_status’ set but not used [-Wunused-but-set-variable] drivers/net/ethernet/micrel/ksz884x.c: In function netdev_get_ethtool_stats: drivers/net/ethernet/micrel/ksz884x.c:6512:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] these variable is never used, so remove it. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14net: micrel: convert tasklets to use new tasklet_setup() APIAllen Pais2-17/+14
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <apais@linux.microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-15ksz884x: switch from 'pci_' to 'dma_' APIChristophe JAILLET1-38/+30
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'ksz_alloc_desc()', GFP_KERNEL can be used because a few lines below, GFP_KERNEL is also used in the 'ksz_alloc_soft_desc()' calls. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-03ksz884x: mark pcidev_suspend() as __maybe_unusedWei Yongjun1-1/+1
In certain configurations without power management support, gcc report the following warning: drivers/net/ethernet/micrel/ksz884x.c:7182:12: warning: 'pcidev_suspend' defined but not used [-Wunused-function] 7182 | static int pcidev_suspend(struct device *dev_d) | ^~~~~~~~~~~~~~ Mark pcidev_suspend() as __maybe_unused to make it clear. Fixes: 64120615d140 ("ksz884x: use generic power management") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-01ksz884x: use generic power managementVaibhav Gupta1-16/+9
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. Thus, there is no need to call the PCI helper functions like pci_enable_wake(), pci_save/restore_sate() and pci_set_power_state(). Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-13treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-5/+5
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-05-29net: ks8851: Remove ks8851_mll.cMarek Vasut1-1393/+0
The ks8851_mll.c is replaced by ks8851_par.c, which is using common code from ks8851.c, just like ks8851_spi.c . Remove this old ad-hoc driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29net: ks8851: Implement Parallel bus operationsMarek Vasut3-0/+360
Implement accessors for KS8851-16MLL/MLLI/MLLU parallel bus variant of the KS8851. This is based off the ks8851_mll.c , which is a driver for exactly the same hardware, however the ks8851.c code is much higher quality. Hence, this patch pulls out the relevant information from the ks8851_mll.c on how to access the bus, but uses the common ks8851.c code. To make this patch reviewable, instead of rewriting ks8851_mll.c, ks8851_mll.c is removed in a separate subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29net: ks8851: Separate SPI operations into separate fileMarek Vasut4-597/+642
Pull all the SPI bus specific code into a separate file, so that it is not mixed with the common code. Rename ks8851.c to ks8851_common.c. The ks8851_common.c is linked with ks8851_spi.c now, so it can call the accessors in the ks8851_spi.c without any pointer indirection. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29net: ks8851: Implement register, FIFO, lock accessor callbacksMarek Vasut1-22/+156
The register and FIFO accessors are bus specific, so is locking. Implement callbacks so that each variant of the KS8851 can implement matching accessors and locking, and use the rest of the common code. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29net: ks8851: Permit overridding interrupt enable registerMarek Vasut1-11/+11
The parallel bus variant does not need to use the TX interrupt at all as it writes the TX FIFO directly with in .ndo_start_xmit, permit the drivers to configure the interrupt enable bits. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-29net: ks8851: Factor out TX work flush functionMarek Vasut1-4/+12
While the SPI version of the KS8851 requires a TX worker thread to pump data via SPI, the parallel bus version can write data into the TX FIFO directly in .ndo_start_xmit, as the parallel bus access is much faster and does not sleep. Factor out this TX work flush part, so it can be overridden by the parallel bus driver. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-29 06:40:41 +0300