summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/neterion
AgeCommit message (Collapse)AuthorFilesLines
2024-01-12net: fill in MODULE_DESCRIPTION()s for s2ioBreno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Neterion 10GbE (s2io) driver. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240108181610.2697017-10-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10ethernet: s2io: Use ether_addr_to_u64() to convert ethernet addressLi Zetao1-12/+5
Use ether_addr_to_u64() to convert an Ethernet address into a u64 value, instead of directly calculating, as this is exactly what this function does. Signed-off-by: Li Zetao <lizetao1@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230808113849.4033657-1-lizetao1@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-12ethernet: s2io: don't call dev_kfree_skb() under spin_lock_irqsave()Yang Yingliang1-1/+1
It is not allowed to call kfree_skb() or consume_skb() from hardware interrupt context or with hardware interrupts being disabled. It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead. The difference between them is free reason, dev_kfree_skb_irq() means the SKB is dropped in error and dev_consume_skb_irq() means the SKB is consumed in normal. In this case, dev_kfree_skb() is called in free_tx_buffers() to drop the SKBs in tx buffers, when the card is down, so replace it with dev_kfree_skb_irq() here. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-10ethernet: s2io: disable napi when start nic failed in s2io_card_up()Zhengchao Shao1-9/+20
When failed to start nic or add interrupt service routine in s2io_card_up() for opening device, napi isn't disabled. When open s2io device next time, it will trigger a BUG_ON()in napi_enable(). Compile tested only. Fixes: 5f490c968056 ("S2io: Fixed synchronization between scheduling of napi with card reset and close") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221109023741.131552-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-29ethernet: s2io: Use skb_put_data() instead of skb_put/memcpy pairShang XiaoJing1-2/+1
Use skb_put_data() instead of skb_put() and memcpy(), which is shorter and clear. Drop the tmp variable that is not needed any more. Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Link: https://lore.kernel.org/r/20220927022802.16050-1-shangxiaojing@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-29net: drop the weight argument from netif_napi_addJakub Kicinski1-2/+2
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-01net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang1-3/+3
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-06eth: remove neterion/vxgeJakub Kicinski13-23147/+0
The last meaningful change to this driver was made by Jon in 2011. As much as we'd like to believe that this is because the code is perfect the chances are nobody is using this hardware. Because of the size of this driver there is a nontrivial maintenance cost to keeping this code around, in the last 2 years we're averaging more than 1 change a month. Some of which require nontrivial review effort, see commit 877fe9d49b74 ("Revert "drivers/net/ethernet/neterion/vxge: Fix a use-after-free bug in vxge-main.c"") for example. Let's try to remove this driver. In general, IMHO, we need to establish a clear path for shedding dead code. It will be hard to unless we have some experience trying to delete stuff. Link: https://lore.kernel.org/r/20220701044234.706229-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-01neterion/vxge: fix repeated words in commentsJilin Yuan2-2/+2
Delete the redundant word 'frame'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01ethernet/neterion: fix repeated words in commentsJilin Yuan1-5/+5
Delete the redundant word 'the'. Delete the redundant word 'a'. Delete the redundant word 'frame'. Delete the redundant word 'is'. Delete the redundant word 'not'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-17net: vxge: Remove unnecessary synchronize_irq() before free_irq()Minghao Chi1-2/+0
Calling synchronize_irq() right before free_irq() is quite useless. On one hand the IRQ can easily fire again before free_irq() is entered, on the other hand free_irq() itself calls synchronize_irq() internally (in a race condition free way), before any state associated with the IRQ is freed. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220516081914.1651281-1-chi.minghao@zte.com.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-08eth: switch to netif_napi_add_weight()Jakub Kicinski1-4/+5
Switch all Ethernet drivers which use custom napi weights to the new API. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-29eth: vxge: remove a copy of the NAPI_POLL_WEIGHT defineJakub Kicinski2-3/+1
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-03net: vxge: Use dma_set_mask_and_coherent() and simplify codeChristophe JAILLET1-23/+4
Use dma_set_mask_and_coherent() instead of unrolling it with some dma_set_mask()+dma_set_coherent_mask(). Moreover, as stated in [1], dma_set_mask() with a 64-bit mask will never fail if dev->dma_mask is non-NULL. So, if it fails, the 32 bits case will also fail for the same reason. That said, 'high_dma' can only be 1 after a successful dma_set_mask_and_coherent(). Simplify code and remove some dead code accordingly, including a now useless parameter to vxge_device_register(). [1]: https://lkml.org/lkml/2021/6/7/398 Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-03ethernet: s2io: Use dma_set_mask_and_coherent() and simplify codeChristophe JAILLET2-16/+3
Use dma_set_mask_and_coherent() instead of unrolling it with some dma_set_mask()+dma_set_coherent_mask(). Moreover, as stated in [1], dma_set_mask() with a 64-bit mask will never fail if dev->dma_mask is non-NULL. So, if it fails, the 32 bits case will also fail for the same reason. That said, 'dma_flag' can only be 'true' after a successful dma_set_mask_and_coherent(). Simplify code and remove some dead code accordingly, including the now useless 'high_dma_flag' field in 'struct s2io_nic'. [1]: https://lkml.org/lkml/2021/6/7/398 Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14net_tstamp: add new flag HWTSTAMP_FLAG_BONDED_PHC_INDEXHangbin Liu1-4/+0
Since commit 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device") the user could get bond active interface's PHC index directly. But when there is a failover, the bond active interface will change, thus the PHC index is also changed. This may break the user's program if they did not update the PHC timely. This patch adds a new hwtstamp_config flag HWTSTAMP_FLAG_BONDED_PHC_INDEX. When the user wants to get the bond active interface's PHC, they need to add this flag and be aware the PHC index may be changed. With the new flag. All flag checks in current drivers are removed. Only the checking in net_hwtstamp_validate() is kept. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen1-2/+5
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
tools/testing/selftests/net/ioam6.sh 7b1700e009cc ("selftests: net: modify IOAM tests for undef bits") bf77b1400a56 ("selftests: net: Test for the IOAM encapsulation with IPv6") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-14ethernet: constify references to netdev->dev_addr in driversJakub Kicinski2-2/+2
This big patch sprinkles const on local variables and function arguments which may refer to netdev->dev_addr. Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Some of the changes here are not strictly required - const is sometimes cast off but pointer is not used for writing. It seems like it's still better to add the const in case the code changes later or relevant -W flags get enabled for the build. No functional changes. Link: https://lore.kernel.org/r/20211014142432.449314-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-14ethernet: s2io: fix setting mac address during resumeArnd Bergmann1-1/+1
After recent cleanups, gcc started warning about a suspicious memcpy() call during the s2io_io_resume() function: In function '__dev_addr_set', inlined from 'eth_hw_addr_set' at include/linux/etherdevice.h:318:2, inlined from 's2io_set_mac_addr' at drivers/net/ethernet/neterion/s2io.c:5205:2, inlined from 's2io_io_resume' at drivers/net/ethernet/neterion/s2io.c:8569:7: arch/x86/include/asm/string_32.h:182:25: error: '__builtin_memcpy' accessing 6 bytes at offsets 0 and 2 overlaps 4 bytes at offset 2 [-Werror=restrict] 182 | #define memcpy(t, f, n) __builtin_memcpy(t, f, n) | ^~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/netdevice.h:4648:9: note: in expansion of macro 'memcpy' 4648 | memcpy(dev->dev_addr, addr, len); | ^~~~~~ What apparently happened is that an old cleanup changed the calling conventions for s2io_set_mac_addr() from taking an ethernet address as a character array to taking a struct sockaddr, but one of the callers was not changed at the same time. Change it to instead call the low-level do_s2io_prog_unicast() function that still takes the old argument type. Fixes: 2fd376884558 ("S2io: Added support set_mac_address driver entry point") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211013143613.2049096-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-05ethernet: use eth_hw_addr_set() for dev->addr_len casesJakub Kicinski2-3/+3
Convert all Ethernet drivers from memcpy(... dev->addr_len) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, dev->addr_len) + eth_hw_addr_set(dev, np) In theory addr_len may not be ETH_ALEN, but we don't expect non-Ethernet devices to live under this directory, and only the following cases of setting addr_len exist: - cxgb4 for mgmt device, and the drivers which set it to ETH_ALEN: s2io, mlx4, vxge. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: s2io: use eth_hw_addr_set()Jakub Kicinski1-1/+1
Manual conversions because we need to get to the member which is inside an array to have a u8 pointer which eth_hw_addr_set() expects. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: use eth_hw_addr_set()Jakub Kicinski1-1/+1
Convert all Ethernet drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-3/+3
Build failure in drivers/net/wwan/mhi_wwan_mbim.c: add missing parameter (0, assuming we don't want buffer pre-alloc). Conflict in drivers/net/dsa/sja1105/sja1105_main.c between: 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") 0fac6aa098ed ("net: dsa: sja1105: delete the best_effort_vlan_filtering mode") Follow the instructions from the commit message of the former commit - removed the if conditions. When looking at commit 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") note that the mask_iotag fields get removed by the following patch. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-05net: vxge: fix use-after-free in vxge_device_unregisterPavel Skripkin1-3/+3
Smatch says: drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); Since vdev pointer is netdev private data accessing it after free_netdev() call can cause use-after-free bug. Fix it by moving free_netdev() call at the end of the function Fixes: 6cca200362b4 ("vxge: cleanup probe error paths") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann2-2/+2
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-01Merge tag 'net-next-5.14' of ↵Linus Torvalds3-29/+19
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - BPF: - add syscall program type and libbpf support for generating instructions and bindings for in-kernel BPF loaders (BPF loaders for BPF), this is a stepping stone for signed BPF programs - infrastructure to migrate TCP child sockets from one listener to another in the same reuseport group/map to improve flexibility of service hand-off/restart - add broadcast support to XDP redirect - allow bypass of the lockless qdisc to improving performance (for pktgen: +23% with one thread, +44% with 2 threads) - add a simpler version of "DO_ONCE()" which does not require jump labels, intended for slow-path usage - virtio/vsock: introduce SOCK_SEQPACKET support - add getsocketopt to retrieve netns cookie - ip: treat lowest address of a IPv4 subnet as ordinary unicast address allowing reclaiming of precious IPv4 addresses - ipv6: use prandom_u32() for ID generation - ip: add support for more flexible field selection for hashing across multi-path routes (w/ offload to mlxsw) - icmp: add support for extended RFC 8335 PROBE (ping) - seg6: add support for SRv6 End.DT46 behavior - mptcp: - DSS checksum support (RFC 8684) to detect middlebox meddling - support Connection-time 'C' flag - time stamping support - sctp: packetization Layer Path MTU Discovery (RFC 8899) - xfrm: speed up state addition with seq set - WiFi: - hidden AP discovery on 6 GHz and other HE 6 GHz improvements - aggregation handling improvements for some drivers - minstrel improvements for no-ack frames - deferred rate control for TXQs to improve reaction times - switch from round robin to virtual time-based airtime scheduler - add trace points: - tcp checksum errors - openvswitch - action execution, upcalls - socket errors via sk_error_report Device APIs: - devlink: add rate API for hierarchical control of max egress rate of virtual devices (VFs, SFs etc.) - don't require RCU read lock to be held around BPF hooks in NAPI context - page_pool: generic buffer recycling New hardware/drivers: - mobile: - iosm: PCIe Driver for Intel M.2 Modem - support for Qualcomm MSM8998 (ipa) - WiFi: Qualcomm QCN9074 and WCN6855 PCI devices - sparx5: Microchip SparX-5 family of Enterprise Ethernet switches - Mellanox BlueField Gigabit Ethernet (control NIC of the DPU) - NXP SJA1110 Automotive Ethernet 10-port switch - Qualcomm QCA8327 switch support (qca8k) - Mikrotik 10/25G NIC (atl1c) Driver changes: - ACPI support for some MDIO, MAC and PHY devices from Marvell and NXP (our first foray into MAC/PHY description via ACPI) - HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx - Mellanox/Nvidia NIC (mlx5) - NIC VF offload of L2 bridging - support IRQ distribution to Sub-functions - Marvell (prestera): - add flower and match all - devlink trap - link aggregation - Netronome (nfp): connection tracking offload - Intel 1GE (igc): add AF_XDP support - Marvell DPU (octeontx2): ingress ratelimit offload - Google vNIC (gve): new ring/descriptor format support - Qualcomm mobile (rmnet & ipa): inline checksum offload support - MediaTek WiFi (mt76) - mt7915 MSI support - mt7915 Tx status reporting - mt7915 thermal sensors support - mt7921 decapsulation offload - mt7921 enable runtime pm and deep sleep - Realtek WiFi (rtw88) - beacon filter support - Tx antenna path diversity support - firmware crash information via devcoredump - Qualcomm WiFi (wcn36xx) - Wake-on-WLAN support with magic packets and GTK rekeying - Micrel PHY (ksz886x/ksz8081): add cable test support" * tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits) tcp: change ICSK_CA_PRIV_SIZE definition tcp_yeah: check struct yeah size at compile time gve: DQO: Fix off by one in gve_rx_dqo() stmmac: intel: set PCI_D3hot in suspend stmmac: intel: Enable PHY WOL option in EHL net: stmmac: option to enable PHY WOL with PMT enabled net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del} net: use netdev_info in ndo_dflt_fdb_{add,del} ptp: Set lookup cookie when creating a PTP PPS source. net: sock: add trace for socket errors net: sock: introduce sk_error_report net: dsa: replay the local bridge FDB entries pointing to the bridge dev too net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev net: dsa: include fdb entries pointing to bridge in the host fdb list net: dsa: include bridge addresses which are local in the host fdb list net: dsa: sync static FDB entries on foreign interfaces to hardware net: dsa: install the host MDB and FDB entries in the master's RX filter net: dsa: reference count the FDB addresses at the cross-chip notifier level net: dsa: introduce a separate cross-chip notifier type for host FDBs net: dsa: reference count the MDB entries at the cross-chip notifier level ...
2021-06-18net: neterion: vxge: remove redundant continue statementColin Ian King1-3/+2
The continue statement at the end of a for-loop has no effect, invert the if expression and remove the continue. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02net: vxge: Declare the function vxge_reset_all_vpaths as voidZheng Yongjun1-21/+6
variable 'status' is unneeded and it's noneed to check the return value of function vxge_reset_all_vpaths,so declare it as void. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02net: neterion: fix doc warnings in s2io.cYang Yingliang1-0/+6
Add description for may_sleep to fix the W=1 warnings: drivers/net/ethernet/neterion/s2io.c:1110: warning: Function parameter or member 'may_sleep' not described in 'init_tti' drivers/net/ethernet/neterion/s2io.c:3335: warning: Function parameter or member 'may_sleep' not described in 'wait_for_cmd_complete' drivers/net/ethernet/neterion/s2io.c:4881: warning: Function parameter or member 'may_sleep' not described in 's2io_set_multicast' Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-18vxge: Fix fall-through warnings for ClangGustavo A. R. Silva1-0/+1
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a return statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-05-18net: neterion: vxge: Fix wrong function name in commentsYang Shen2-3/+3
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/neterion/vxge/vxge-config.c:4895: warning: expecting prototype for vxge_hw_vpath_rx_doorbell_post(). Prototype was for vxge_hw_vpath_rx_doorbell_init() instead drivers/net/ethernet/neterion/vxge/vxge-main.c:1814: warning: expecting prototype for vxge_poll(). Prototype was for vxge_poll_msix() instead drivers/net/ethernet/neterion/vxge/vxge-main.c:4761: warning: expecting prototype for vxge_rem_nic(). Prototype was for vxge_remove() instead Cc: Jon Mason <jdmason@kudzu.us> Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-18net: neterion: Fix wrong function name in commentsYang Shen1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/neterion/s2io.c:2759: warning: expecting prototype for s2io_poll(). Prototype was for s2io_poll_msix() instead drivers/net/ethernet/neterion/s2io.c:5304: warning: expecting prototype for s2io_ethtol_get_link_ksettings(). Prototype was for s2io_ethtool_get_link_ksettings() instead Cc: Jon Mason <jdmason@kudzu.us> Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-22vxge: avoid -Wemtpy-body warningsArnd Bergmann1-7/+7
There are a few warnings about empty debug macros in this driver: drivers/net/ethernet/neterion/vxge/vxge-main.c: In function 'vxge_probe': drivers/net/ethernet/neterion/vxge/vxge-main.c:4480:76: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 4480 | "Failed in enabling SRIOV mode: %d\n", ret); Change them to proper 'do { } while (0)' expressions to make the code a little more robust and avoid the warnings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-15net: ethernet: neterion: Fix a typo in the file s2io.cBhaskar Chowdhury1-1/+1
s/structue/structure/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-15net: vxget: clean up sparse warningsJakub Kicinski1-9/+9
This code is copying strings in 64 bit quantities, the device returns them in big endian. As long as we store in big endian IOW endian on both sides matches, we're good, so swap to_be64, not from be64. This fixes ~60 sparse warnings. Link: https://lore.kernel.org/r/20201212234426.177015-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-31net: neterion: s2io: Replace in_interrupt() for context detectionSebastian Andrzej Siewior2-20/+25
wait_for_cmd_complete() uses in_interrupt() to detect whether it is safe to sleep or not. The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be seperated or the context be conveyed in an argument passed by the caller, which usually knows the context. in_interrupt() also is only partially correct because it fails to chose the correct code path when just preemption or interrupts are disabled. Add an argument 'may_block' to both functions and adjust the callers to pass the context information. The following call chains which end up invoking wait_for_cmd_complete() were analyzed to be safe to sleep: s2io_card_up() s2io_set_multicast() init_nic() init_tti() s2io_close() do_s2io_delete_unicast_mc() do_s2io_add_mac() s2io_set_mac_addr() do_s2io_prog_unicast() do_s2io_add_mac() s2io_reset() do_s2io_restore_unicast_mc() do_s2io_add_mc() do_s2io_add_mac() s2io_open() do_s2io_prog_unicast() do_s2io_add_mac() The following call chains which end up invoking wait_for_cmd_complete() were analyzed to be safe to sleep: __dev_set_rx_mode() s2io_set_multicast() s2io_txpic_intr_handle() s2io_link() init_tti() Add a may_sleep argument to wait_for_cmd_complete(), s2io_set_multicast() and init_tti() and hand the context information in from the call sites. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Jon Mason <jdmason@kudzu.us> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-28vxge: remove unnecessary cast in kfree()Xu Wang1-1/+1
Remove unnecessary cast in the argument to kfree. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Link: https://lore.kernel.org/r/20201023085533.4792-1-vulab@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-30net: vxge: Remove in_interrupt() conditionalsSebastian Andrzej Siewior2-14/+2
vxge_os_dma_malloc() and vxge_os_dma_malloc_async() are both called from callchains which use GFP_KERNEL allocations unconditionally or have other requirements to be called from fully preemptible task context.. vxge_os_dma_malloc(): 1) __vxge_hw_blockpool_create() <- GFP_KERNEL 2) __vxge_hw_mempool_grow() <- vzalloc() __vxge_hw_blockpool_malloc() vxge_os_dma_malloc_async(): 1 __vxge_hw_mempool_grow() <- vzalloc() __vxge_hw_blockpool_malloc() __vxge_hw_blockpool_blocks_add() 2) vxge_hw_vpath_open() <- vzalloc() __vxge_hw_blockpool_block_allocate() That means neither of these functions needs a conditional allocation mode. Remove the in_interrupt() conditional and use GFP_KERNEL. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-26drivers/net/ethernet: clean up mis-targeted commentsJesse Brandeburg5-74/+74
As part of the W=1 cleanups for ethernet, a million [*] driver comments had to be cleaned up to get the W=1 compilation to succeed. This change finally makes the drivers/net/ethernet tree compile with W=1 set on the command line. NOTE: The kernel uses kdoc style (see Documentation/process/kernel-doc.rst) when documenting code, not doxygen or other styles. After this patch the x86_64 build has no warnings from W=1, however scripts/kernel-doc says there are 1545 more warnings in source files, that I need to develop a script to fix in a followup patch. The errors fixed here are all kdoc of a few classes, with a few outliers: In file included from drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c:10: drivers/net/ethernet/qlogic/netxen/netxen_nic.h:1193:18: warning: ‘FW_DUMP_LEVELS’ defined but not used [-Wunused-const-variable=] 1193 | static const u32 FW_DUMP_LEVELS[] = { 0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff }; | ^~~~~~~~~~~~~~ ... repeats 4 times... drivers/net/ethernet/sun/cassini.c:2084:24: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] 2084 | RX_USED_ADD(page, i); drivers/net/ethernet/natsemi/ns83820.c: In function ‘phy_intr’: drivers/net/ethernet/natsemi/ns83820.c:603:6: warning: variable ‘tbisr’ set but not used [-Wunused-but-set-variable] 603 | u32 tbisr, tanar, tanlpar; | ^~~~~ drivers/net/ethernet/natsemi/ns83820.c: In function ‘ns83820_get_link_ksettings’: drivers/net/ethernet/natsemi/ns83820.c:1207:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable] 1207 | u32 cfg, tanar, tbicr; | ^~~~~ drivers/net/ethernet/packetengines/yellowfin.c:1063:18: warning: variable ‘yf_size’ set but not used [-Wunused-but-set-variable] 1063 | int data_size, yf_size; | ^~~~~~~ Normal kdoc fixes: warning: Function parameter or member 'x' not described in 'y' warning: Excess function parameter 'x' description in 'y' warning: Cannot understand <string> on line <NNN> - I thought it was a doc line [*] - ok it wasn't quite a million, but it felt like it. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-26drivers/net/ethernet: clean up unused assignmentsJesse Brandeburg1-21/+11
As part of the W=1 compliation series, these lines all created warnings about unused variables that were assigned a value. Most of them are from register reads, but some are just picking up a return value from a function and never doing anything with it. Fixed warnings: .../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable] .../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable] .../ethernet/cortina/gemini.c:512:6: warning: variable ‘val’ set but not used [-Wunused-but-set-variable] .../ethernet/cortina/gemini.c:2110:21: warning: variable ‘config0’ set but not used [-Wunused-but-set-variable] .../ethernet/cavium/liquidio/octeon_device.c:1327:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/cavium/liquidio/octeon_device.c:1358:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/dec/tulip/media.c:322:8: warning: variable ‘setup’ set but not used [-Wunused-but-set-variable] .../ethernet/dec/tulip/de4x5.c:4928:13: warning: variable ‘r3’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:4981:6: warning: variable ‘rx_status’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:6510:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:6087: warning: cannot understand function prototype: 'struct hw_regs ' .../ethernet/microchip/lan743x_main.c:161:6: warning: variable ‘int_en’ set but not used [-Wunused-but-set-variable] .../ethernet/microchip/lan743x_main.c:1702:6: warning: variable ‘int_sts’ set but not used [-Wunused-but-set-variable] .../ethernet/microchip/lan743x_main.c:3041:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] .../ethernet/natsemi/ns83820.c:603:6: warning: variable ‘tbisr’ set but not used [-Wunused-but-set-variable] .../ethernet/natsemi/ns83820.c:1207:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable] .../ethernet/marvell/mvneta.c:754:6: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:33:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:160:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:490:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:2378:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/packetengines/yellowfin.c:1063:18: warning: variable ‘yf_size’ set but not used [-Wunused-but-set-variable] .../ethernet/realtek/8139cp.c:1242:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/mellanox/mlx4/en_tx.c:858:6: warning: variable ‘ring_cons’ set but not used [-Wunused-but-set-variable] .../ethernet/sis/sis900.c:792:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:878:11: warning: variable ‘rx_ev_pkt_type’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:877:23: warning: variable ‘rx_ev_mcast_pkt’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:877:7: warning: variable ‘rx_ev_hdr_type’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:876:7: warning: variable ‘rx_ev_other_err’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:1646:21: warning: variable ‘buftbl_min’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:2535:32: warning: variable ‘spec’ set but not used [-Wunused-but-set-variable] .../ethernet/via/via-velocity.c:880:6: warning: variable ‘curr_status’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/tlan.c:656:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/davinci_emac.c:1230:6: warning: variable ‘num_tx_pkts’ set but not used [-Wunused-but-set-variable] .../ethernet/synopsys/dwc-xlgmac-common.c:516:8: warning: variable ‘str’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/cpsw_new.c:1662:22: warning: variable ‘priv’ set but not used [-Wunused-but-set-variable] The register reads should be OK, because the current implementation of readl and friends will always execute even without an lvalue. When it makes sense, just remove the lvalue assignment and the local. Other times, just remove the offending code, and occasionally, just mark the variable as maybe unused since it could be used in an ifdef or debug scenario. Only compile tested with W=1. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net: ethernet/neterion/vxge: fix spelling of "functionality"Randy Dunlap1-1/+1
Fix typo/spello of "functionality". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jon Mason <jdmason@kudzu.us> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Cc: Jiri Kosina <trivial@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-3/+3
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds4-168/+151
Pull networking updates from David Miller: 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan. 2) Support UDP segmentation in code TSO code, from Eric Dumazet. 3) Allow flashing different flash images in cxgb4 driver, from Vishal Kulkarni. 4) Add drop frames counter and flow status to tc flower offloading, from Po Liu. 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni. 6) Various new indirect call avoidance, from Eric Dumazet and Brian Vazquez. 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from Yonghong Song. 8) Support querying and setting hardware address of a port function via devlink, use this in mlx5, from Parav Pandit. 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson. 10) Switch qca8k driver over to phylink, from Jonathan McDowell. 11) In bpftool, show list of processes holding BPF FD references to maps, programs, links, and btf objects. From Andrii Nakryiko. 12) Several conversions over to generic power management, from Vaibhav Gupta. 13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry Yakunin. 14) Various https url conversions, from Alexander A. Klimov. 15) Timestamping and PHC support for mscc PHY driver, from Antoine Tenart. 16) Support bpf iterating over tcp and udp sockets, from Yonghong Song. 17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov. 18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan. 19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several drivers. From Luc Van Oostenryck. 20) XDP support for xen-netfront, from Denis Kirjanov. 21) Support receive buffer autotuning in MPTCP, from Florian Westphal. 22) Support EF100 chip in sfc driver, from Edward Cree. 23) Add XDP support to mvpp2 driver, from Matteo Croce. 24) Support MPTCP in sock_diag, from Paolo Abeni. 25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic infrastructure, from Jakub Kicinski. 26) Several pci_ --> dma_ API conversions, from Christophe JAILLET. 27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel. 28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki. 29) Refactor a lot of networking socket option handling code in order to avoid set_fs() calls, from Christoph Hellwig. 30) Add rfc4884 support to icmp code, from Willem de Bruijn. 31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei. 32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin. 33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin. 34) Support TCP syncookies in MPTCP, from Flowian Westphal. 35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano Brivio. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits) net: thunderx: initialize VF's mailbox mutex before first usage usb: hso: remove bogus check for EINPROGRESS usb: hso: no complaint about kmalloc failure hso: fix bailout in error case of probe ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM selftests/net: relax cpu affinity requirement in msg_zerocopy test mptcp: be careful on subflow creation selftests: rtnetlink: make kci_test_encap() return sub-test result selftests: rtnetlink: correct the final return value for the test net: dsa: sja1105: use detected device id instead of DT one on mismatch tipc: set ub->ifindex for local ipv6 address ipv6: add ipv6_dev_find() net: openvswitch: silence suspicious RCU usage warning Revert "vxlan: fix tos value before xmit" ptp: only allow phase values lower than 1 period farsync: switch from 'pci_' to 'dma_' API wan: wanxl: switch from 'pci_' to 'dma_' API hv_netvsc: do not use VF device if link is down dpaa2-eth: Fix passing zero to 'PTR_ERR' warning net: macb: Properly handle phylink on at91sam9x ...
2020-08-04Merge tag 'uninit-macro-v5.9-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull uninitialized_var() macro removal from Kees Cook: "This is long overdue, and has hidden too many bugs over the years. The series has several "by hand" fixes, and then a trivial treewide replacement. - Clean up non-trivial uses of uninitialized_var() - Update documentation and checkpatch for uninitialized_var() removal - Treewide removal of uninitialized_var()" * tag 'uninit-macro-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: compiler: Remove uninitialized_var() macro treewide: Remove uninitialized_var() usage checkpatch: Remove awareness of uninitialized_var() macro mm/debug_vm_pgtable: Remove uninitialized_var() usage f2fs: Eliminate usage of uninitialized_var() macro media: sur40: Remove uninitialized_var() usage KVM: PPC: Book3S PR: Remove uninitialized_var() usage clk: spear: Remove uninitialized_var() usage clk: st: Remove uninitialized_var() usage spi: davinci: Remove uninitialized_var() usage ide: Remove uninitialized_var() usage rtlwifi: rtl8192cu: Remove uninitialized_var() usage b43: Remove uninitialized_var() usage drbd: Remove uninitialized_var() usage x86/mm/numa: Remove uninitialized_var() usage docs: deprecated.rst: Add uninitialized_var()
2020-07-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+1
The UDP reuseport conflict was a little bit tricky. The net-next code, via bpf-next, extracted the reuseport handling into a helper so that the BPF sk lookup code could invoke it. At the same time, the logic for reuseport handling of unconnected sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace which changed the logic to carry on the reuseport result into the rest of the lookup loop if we do not return immediately. This requires moving the reuseport_has_conns() logic into the callers. While we are here, get rid of inline directives as they do not belong in foo.c files. The other changes were cases of more straightforward overlapping modifications. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21net: neterion: vxge: reduce stack usage in VXGE_COMPLETE_VPATH_TXBixuan Cui1-1/+1
Fix the warning: [-Werror=-Wframe-larger-than=] drivers/net/ethernet/neterion/vxge/vxge-main.c: In function'VXGE_COMPLETE_VPATH_TX.isra.37': drivers/net/ethernet/neterion/vxge/vxge-main.c:119:1: warning: the frame size of 1056 bytes is larger than 1024 bytes Dropping the NR_SKB_COMPLETED to 16 is appropriate that won't have much impact on performance and functionality. Signed-off-by: Bixuan Cui <cuibixuan@huawei.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21net: vxge-main: Remove unnecessary cast in kfree()Xu Wang1-2/+2
Remove unnecassary casts in the argument to kfree. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-16treewide: Remove uninitialized_var() usageKees Cook1-1/+1
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-15net: neterion: vxge: switch from 'pci_' to 'dma_' APIChristophe JAILLET2-54/+52
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. No GFP_ flag needs to be corrected. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-28 18:55:35 +0300