Age | Commit message (Collapse) | Author | Files | Lines |
|
Even if protected from preemption and interrupts, a small time window
remains when the 2 register reads could return inconsistent values,
each time the "seconds" register changes. This could lead to an about
1-second error in the reported time.
Add logic to ensure the "seconds" and "nanoseconds" values are consistent.
Fixes: 92ba6888510c ("stmmac: add the support for PTP hw clock driver")
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220203160025.750632-1-yannick.vignon@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Do not try to use any SKB fields after the packet has been passed up in the
receive stack.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Link: https://lore.kernel.org/r/20220202083039.3774851-1-steen.hegelund@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-02-01
This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
Sorry about the long series, but I had to move the top two patches from
net-next to net to help avoiding a build break when kspp branch is merged
into linus-next on next merge window.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-02-01
This series contains updates to e1000e driver only.
Sasha removes CSME handshake with TGL platform as this is not supported
and is causing hardware unit hangs to be reported.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000e: Handshake with CSME starts from ADL platforms
e1000e: Separate ADP board type from TGP
====================
Link: https://lore.kernel.org/r/20220201173754.580305-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.
Use flexible arrays instead of zero-element arrays (which look like they
are always overflowing) and split the cross-field memcpy() into two halves
that can be appropriately bounds-checked by the compiler.
We were doing:
#define ETH_HLEN 14
#define VLAN_HLEN 4
...
#define MLX5E_XDP_MIN_INLINE (ETH_HLEN + VLAN_HLEN)
...
struct mlx5e_tx_wqe *wqe = mlx5_wq_cyc_get_wqe(wq, pi);
...
struct mlx5_wqe_eth_seg *eseg = &wqe->eth;
struct mlx5_wqe_data_seg *dseg = wqe->data;
...
memcpy(eseg->inline_hdr.start, xdptxd->data, MLX5E_XDP_MIN_INLINE);
target is wqe->eth.inline_hdr.start (which the compiler sees as being
2 bytes in size), but copying 18, intending to write across start
(really vlan_tci, 2 bytes). The remaining 16 bytes get written into
wqe->data[0], covering byte_count (4 bytes), lkey (4 bytes), and addr
(8 bytes).
struct mlx5e_tx_wqe {
struct mlx5_wqe_ctrl_seg ctrl; /* 0 16 */
struct mlx5_wqe_eth_seg eth; /* 16 16 */
struct mlx5_wqe_data_seg data[]; /* 32 0 */
/* size: 32, cachelines: 1, members: 3 */
/* last cacheline: 32 bytes */
};
struct mlx5_wqe_eth_seg {
u8 swp_outer_l4_offset; /* 0 1 */
u8 swp_outer_l3_offset; /* 1 1 */
u8 swp_inner_l4_offset; /* 2 1 */
u8 swp_inner_l3_offset; /* 3 1 */
u8 cs_flags; /* 4 1 */
u8 swp_flags; /* 5 1 */
__be16 mss; /* 6 2 */
__be32 flow_table_metadata; /* 8 4 */
union {
struct {
__be16 sz; /* 12 2 */
u8 start[2]; /* 14 2 */
} inline_hdr; /* 12 4 */
struct {
__be16 type; /* 12 2 */
__be16 vlan_tci; /* 14 2 */
} insert; /* 12 4 */
__be32 trailer; /* 12 4 */
}; /* 12 4 */
/* size: 16, cachelines: 1, members: 9 */
/* last cacheline: 16 bytes */
};
struct mlx5_wqe_data_seg {
__be32 byte_count; /* 0 4 */
__be32 lkey; /* 4 4 */
__be64 addr; /* 8 8 */
/* size: 16, cachelines: 1, members: 3 */
/* last cacheline: 16 bytes */
};
So, split the memcpy() so the compiler can reason about the buffer
sizes.
"pahole" shows no size nor member offset changes to struct mlx5e_tx_wqe
nor struct mlx5e_umr_wqe. "objdump -d" shows no meaningful object
code changes (i.e. only source line number induced differences and
optimizations).
Fixes: b5503b994ed5 ("net/mlx5e: XDP TX forwarding support")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.
Use struct_group() in struct vlan_ethhdr around members h_dest and
h_source, so they can be referenced together. This will allow memcpy()
and sizeof() to more easily reason about sizes, improve readability,
and avoid future warnings about writing beyond the end of h_dest.
"pahole" shows no size nor member offset changes to struct vlan_ethhdr.
"objdump -d" shows no object code changes.
Fixes: 34802a42b352 ("net/mlx5e: Do not modify the TX SKB")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently the driver adds implicit modify hdr action for
decap rules on tunnel devices if the port is an ovs port.
This is also done if the action is drop and makes the modify
hdr redundant and also the FW doesn't support it and will generate
a syndrome.
kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3)
Fix it by adding the implicit modify hdr only for fwd actions.
Fixes: b16eb3c81fe2 ("net/mlx5: Support internal port as decap route device")
Fixes: 077cdda764c7 ("net/mlx5e: TC, Fix memory leak with rules with internal port")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
IPsec Tunnel mode crypto offload software parser (SWP) setting in data
path currently always set the inner L4 offset regardless of the
encapsulated L4 header type and whether it exists in the first place,
this breaks non TCP/UDP traffic as such.
Set the SWP inner L4 offset only when the IPsec tunnel encapsulated L4
header protocol is TCP/UDP.
While at it fix inner ip protocol read for setting MLX5_ETH_WQE_SWP_INNER_L4_UDP
flag to address the case where the ip header protocol is IPv6.
Fixes: f1267798c980 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
IPsec crypto offload always set the ethernet segment checksum flags with
the inner L4 header checksum flag enabled for encapsulated IPsec offloaded
packet regardless of the encapsulated L4 header type, and even if it
doesn't exists in the first place, this breaks non TCP/UDP traffic as
such.
Set the inner L4 checksum flag only when the encapsulated L4 header
protocol is TCP/UDP using software parser swp_inner_l4_offset field as
indication.
Fixes: 5cfb540ef27b ("net/mlx5e: Set IPsec WAs only in IP's non checksum partial case.")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The hardware spec defines max_average_bw == 0 as "unlimited bandwidth".
max_average_bw is calculated as `ceil / BYTES_IN_MBIT`, which can become
0 when ceil is small, leading to an undesired effect of having no
bandwidth limit.
This commit fixes it by rounding up small values of ceil to 1 Mbit/s.
Fixes: 214baf22870c ("net/mlx5e: Support HTB offload")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The variable modact is not initialized before used in command
modify header allocation which can cause command to fail.
Fix by initializing modact with zeros.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 8f1e0b97cc70 ("net/mlx5: E-Switch, Mark miss packets with new chain id mapping")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Current implementation of bond netevent handler only check if
the handled netdev is VF representor and it missing a check if
the VF representor is on the same phys device of the bond handling
the netevent.
Fix by adding the missing check and optimizing the check if
the netdev is VF representor so it will not access uninitialized
private data and crashes.
BUG: kernel NULL pointer dereference, address: 000000000000036c
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
Workqueue: eth3bond0 bond_mii_monitor [bonding]
RIP: 0010:mlx5e_is_uplink_rep+0xc/0x50 [mlx5_core]
RSP: 0018:ffff88812d69fd60 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8881cf800000 RCX: 0000000000000000
RDX: ffff88812d69fe10 RSI: 000000000000001b RDI: ffff8881cf800880
RBP: ffff8881cf800000 R08: 00000445cabccf2b R09: 0000000000000008
R10: 0000000000000004 R11: 0000000000000008 R12: ffff88812d69fe10
R13: 00000000fffffffe R14: ffff88820c0f9000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88846fb00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000036c CR3: 0000000103d80006 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
mlx5e_eswitch_uplink_rep+0x31/0x40 [mlx5_core]
mlx5e_rep_is_lag_netdev+0x94/0xc0 [mlx5_core]
mlx5e_rep_esw_bond_netevent+0xeb/0x3d0 [mlx5_core]
raw_notifier_call_chain+0x41/0x60
call_netdevice_notifiers_info+0x34/0x80
netdev_lower_state_changed+0x4e/0xa0
bond_mii_monitor+0x56b/0x640 [bonding]
process_one_work+0x1b9/0x390
worker_thread+0x4d/0x3d0
? rescuer_thread+0x350/0x350
kthread+0x124/0x150
? set_kthread_struct+0x40/0x40
ret_from_fork+0x1f/0x30
Fixes: 7e51891a237f ("net/mlx5e: Use netdev events to set/del egress acl forward-to-vport rule")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In case the HW doesn't perform header-data split, it will write the whole
packet into the data buffer in the WQ, in this case the SHAMPO CQE handler
couldn't use the header entry to build the SKB, instead it should allocate
a new memory to build the SKB using the function:
mlx5e_skb_from_cqe_mpwrq_nonlinear.
Fixes: f97d5c2a453e ("net/mlx5e: Add handle SHAMPO cqe support")
Signed-off-by: Khalid Manaa <khalidm@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The HW doesn't wrap the CQE.shampo.header_index field according to the
headers buffer size, instead it always increases it until reaching overflow
of u16 size.
Thus the mlx5e_handle_rx_cqe_mpwrq_shampo handler should mask the
CQE header_index field to find the actual header index in the headers buffer.
Fixes: f97d5c2a453e ("net/mlx5e: Add handle SHAMPO cqe support")
Signed-off-by: Khalid Manaa <khalidm@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When changing mode to switchdev, rep bridge init registered to netdevice
notifier holds the devlink lock and then takes pernet_ops_rwsem.
At that time deleting a netns holds pernet_ops_rwsem and then takes
the devlink lock.
Example sequence is:
$ ip netns add foo
$ devlink dev eswitch set pci/0000:00:08.0 mode switchdev &
$ ip netns del foo
deleting netns trace:
[ 1185.365555] ? devlink_pernet_pre_exit+0x74/0x1c0
[ 1185.368331] ? mutex_lock_io_nested+0x13f0/0x13f0
[ 1185.370984] ? xt_find_table+0x40/0x100
[ 1185.373244] ? __mutex_lock+0x24a/0x15a0
[ 1185.375494] ? net_generic+0xa0/0x1c0
[ 1185.376844] ? wait_for_completion_io+0x280/0x280
[ 1185.377767] ? devlink_pernet_pre_exit+0x74/0x1c0
[ 1185.378686] devlink_pernet_pre_exit+0x74/0x1c0
[ 1185.379579] ? devlink_nl_cmd_get_dumpit+0x3a0/0x3a0
[ 1185.380557] ? xt_find_table+0xda/0x100
[ 1185.381367] cleanup_net+0x372/0x8e0
changing mode to switchdev trace:
[ 1185.411267] down_write+0x13a/0x150
[ 1185.412029] ? down_write_killable+0x180/0x180
[ 1185.413005] register_netdevice_notifier+0x1e/0x210
[ 1185.414000] mlx5e_rep_bridge_init+0x181/0x360 [mlx5_core]
[ 1185.415243] mlx5e_uplink_rep_enable+0x269/0x480 [mlx5_core]
[ 1185.416464] ? mlx5e_uplink_rep_disable+0x210/0x210 [mlx5_core]
[ 1185.417749] mlx5e_attach_netdev+0x232/0x400 [mlx5_core]
[ 1185.418906] mlx5e_netdev_attach_profile+0x15b/0x1e0 [mlx5_core]
[ 1185.420172] mlx5e_netdev_change_profile+0x15a/0x1d0 [mlx5_core]
[ 1185.421459] mlx5e_vport_rep_load+0x557/0x780 [mlx5_core]
[ 1185.422624] ? mlx5e_stats_grp_vport_rep_num_stats+0x10/0x10 [mlx5_core]
[ 1185.424006] mlx5_esw_offloads_rep_load+0xdb/0x190 [mlx5_core]
[ 1185.425277] esw_offloads_enable+0xd74/0x14a0 [mlx5_core]
Fix this by registering rep bridges for per net netdev notifier
instead of global one, which operats on the net namespace without holding
the pernet_ops_rwsem.
Fixes: 19e9bfa044f3 ("net/mlx5: Bridge, add offload infrastructure")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Only prio 1 is supported for nic mode when there is no ignore flow level
support in firmware. But for switchdev mode, which supports fixed number
of statically pre-allocated prios, this restriction is not relevant so
it can be relaxed.
Fixes: d671e109bd85 ("net/mlx5: Fix tc max supported prio for nic mode")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Such rules are redundant but allowed and passed to the driver.
The driver does not support offloading such rules so return an error.
Fixes: 03a9d11e6eeb ("net/mlx5e: Add TC drop and mirred/redirect action parsing for SRIOV offloads")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Substitute del_timer() with del_timer_sync() in fw reset polling
deactivation flow, in order to prevent a race condition which occurs
when del_timer() is called and timer is deactivated while another
process is handling the timer interrupt. A situation that led to
the following call trace:
RIP: 0010:run_timer_softirq+0x137/0x420
<IRQ>
recalibrate_cpu_khz+0x10/0x10
ktime_get+0x3e/0xa0
? sched_clock_cpu+0xb/0xc0
__do_softirq+0xf5/0x2ea
irq_exit_rcu+0xc1/0xf0
sysvec_apic_timer_interrupt+0x9e/0xc0
asm_sysvec_apic_timer_interrupt+0x12/0x20
</IRQ>
Fixes: 38b9f903f22b ("net/mlx5: Handle sync reset request event")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When querying the module EEPROM, there was a misusage of the 'offset'
variable vs the 'query.offset' field.
Fix that by always using 'offset' and assigning its value to
'query.offset' right before the mcia register read call.
While at it, the cross-pages read size adjustment was changed to be more
intuitive.
Fixes: e19b0a3474ab ("net/mlx5: Refactor module EEPROM query")
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
This kind of action is not supported by firmware and generates a
syndrome.
kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3)
Fixes: d7e75a325cb2 ("net/mlx5e: Add offloading of E-Switch TC pedit (header re-write) actions")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Even though net_device->name is guaranteed to be null-terminated string of
size<=IFNAMSIZ, the test robot complains that return value of netdev_name()
can be larger:
In file included from include/trace/define_trace.h:102,
from drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h:113,
from drivers/net/ethernet/mellanox/mlx5/core/esw/bridge.c:12:
drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h: In function 'trace_event_raw_event_mlx5_esw_bridge_fdb_template':
>> drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h:24:29: warning: 'strncpy' output may be truncated copying 16 bytes from a string of length 20 [-Wstringop-truncation]
24 | strncpy(__entry->dev_name,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
25 | netdev_name(fdb->dev),
| ~~~~~~~~~~~~~~~~~~~~~~
26 | IFNAMSIZ);
| ~~~~~~~~~
This is caused by the fact that default value of IFNAMSIZ is 16, while
placeholder value that is returned by netdev_name() for unnamed net devices
is larger than that.
The offending code is in a tracing function that is only called for mlx5
representors, so there is no straightforward way to reproduce the issue but
let's fix it for correctness sake by replacing strncpy() with strscpy() to
ensure that resulting string is always null-terminated.
Fixes: 9724fd5d9c2a ("net/mlx5: Bridge, add tracepoints")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The mlx5_esw_bridge_cleanup() is expected to be called with rtnl lock
taken, which is true for mlx5e_rep_bridge_cleanup() function but not for
error handling code in mlx5e_rep_bridge_init(). Add missing rtnl
lock/unlock calls and extend both mlx5_esw_bridge_cleanup() and its dual
function mlx5_esw_bridge_init() with ASSERT_RTNL() to verify the invariant
from now on.
Fixes: 7cd6a54a8285 ("net/mlx5: Bridge, handle FDB events")
Fixes: 19e9bfa044f3 ("net/mlx5: Bridge, add offload infrastructure")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-01-31
This series contains updates to i40e driver only.
Jedrzej fixes a condition check which would cause an error when
resetting bandwidth when DCB is active with one TC.
Karen resolves a null pointer dereference that could occur when removing
the driver while VSI rings are being disabled.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: Fix reset path while removing the driver
i40e: Fix reset bw limit when DCB enabled with 1 TC
====================
Link: https://lore.kernel.org/r/20220201000522.505909-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Build bot produced a smatch indentation warning,
the code looks correct but it mixes spaces and tabs.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220131211730.3940875-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Handshake with CSME/AMT on none provisioned platforms during S0ix flow
is not supported on TGL platform and can cause to HW unit hang. Update
the handshake with CSME flow to start from the ADL platform.
Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
We have the same LAN controller on different PCH's. Separate ADP board
type from a TGP which will allow for specific fixes to be applied for
ADP platforms.
Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Unlike gmac100, gmac1000, gmac4 has 27 DMA registers and they are
located at DMA_CHAN_BASE_ADDR (0x1100). In order for ethtool to dump
gmac4 DMA registers correctly, this commit checks if a net_device has
gmac4 and uses different logic to dump its DMA registers.
This fixes the following KASAN warning, which can normally be triggered
by a command similar like "ethtool -d eth0":
BUG: KASAN: vmalloc-out-of-bounds in dwmac4_dump_dma_regs+0x6d4/0xb30
Write of size 4 at addr ffffffc010177100 by task ethtool/1839
kasan_report+0x200/0x21c
__asan_report_store4_noabort+0x34/0x60
dwmac4_dump_dma_regs+0x6d4/0xb30
stmmac_ethtool_gregs+0x110/0x204
ethtool_get_regs+0x200/0x4b0
dev_ethtool+0x1dac/0x3800
dev_ioctl+0x7c0/0xb50
sock_ioctl+0x298/0x6c4
...
Fixes: fbf68229ffe7 ("net: stmmac: unify registers dumps methods")
Signed-off-by: Camel Guo <camelg@axis.com>
Link: https://lore.kernel.org/r/20220131083841.3346801-1-camel.guo@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the crash in kernel while dereferencing the NULL pointer,
when the driver is unloaded and simultaneously the VSI rings
are being stopped.
The hardware requires 50msec in order to finish RX queues
disable. For this purpose the driver spins in mdelay function
for the operation to be completed.
For example changing number of queues which requires reset would
fail in the following call stack:
1) i40e_prep_for_reset
2) i40e_pf_quiesce_all_vsi
3) i40e_quiesce_vsi
4) i40e_vsi_close
5) i40e_down
6) i40e_vsi_stop_rings
7) i40e_vsi_control_rx -> disable requires the delay of 50msecs
8) continue back in i40e_down function where
i40e_clean_tx_ring(vsi->tx_rings[i]) is going to crash
When the driver was spinning vsi_release called
i40e_vsi_free_arrays where the vsi->tx_rings resources
were freed and the pointer was set to NULL.
Fixes: 5b6d4a7f20b0 ("i40e: Fix crash during removing i40e driver")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
There was an AQ error I40E_AQ_RC_EINVAL when trying
to reset bw limit as part of bw allocation setup.
This was caused by trying to reset bw limit with
DCB enabled. Bw limit should not be reset when
DCB is enabled. The code was relying on the pf->flags
to check if DCB is enabled but if only 1 TC is available
this flag will not be set even though DCB is enabled.
Add a check for number of TC and if it is 1
don't try to reset bw limit even if pf->flags shows
DCB as disabled.
Fixes: fa38e30ac73f ("i40e: Fix for Tx timeouts when interface is brought up if DCB is enabled")
Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com> # Flatten the condition
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
There are two issues with runtime pm handling in stmmac_dvr_remove():
1. the mac is runtime suspended before stopping dma and rx/tx. We
need to ensure the device is properly resumed back.
2. the stmmaceth clk enable/disable isn't balanced in both exit and
error handling code path. Take the exit code path for example, when we
unbind the driver or rmmod the driver module, the mac is runtime
suspended as said above, so the stmmaceth clk is disabled, but
stmmac_dvr_remove()
stmmac_remove_config_dt()
clk_disable_unprepare()
CCF will complain this time. The error handling code path suffers
from the similar situtaion.
Here are kernel warnings in error handling code path on Allwinner D1
platform:
[ 1.604695] ------------[ cut here ]------------
[ 1.609328] bus-emac already disabled
[ 1.613015] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:952 clk_core_disable+0xcc/0xec
[ 1.621039] CPU: 0 PID: 38 Comm: kworker/u2:1 Not tainted 5.14.0-rc4#1
[ 1.627653] Hardware name: Allwinner D1 NeZha (DT)
[ 1.632443] Workqueue: events_unbound deferred_probe_work_func
[ 1.638286] epc : clk_core_disable+0xcc/0xec
[ 1.642561] ra : clk_core_disable+0xcc/0xec
[ 1.646835] epc : ffffffff8023c2ec ra : ffffffff8023c2ec sp : ffffffd00411bb10
[ 1.654054] gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : ffffffff80ed6a6f
[ 1.661272] t1 : ffffffff80ed6a60 t2 : 0000000000000000 s0 : ffffffe001509e00
[ 1.668489] s1 : 0000000000000001 a0 : 0000000000000019 a1 : ffffffff80e80bd8
[ 1.675707] a2 : 00000000ffffefff a3 : 00000000000000f4 a4 : 0000000000000002
[ 1.682924] a5 : 0000000000000001 a6 : 0000000000000030 a7 : 00000000028f5c29
[ 1.690141] s2 : 0000000000000800 s3 : ffffffe001375000 s4 : ffffffe01fdf7a80
[ 1.697358] s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff
[ 1.704577] s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000
[ 1.711794] s11: ffffffe001b80760 t3 : 0000000000000062 t4 : ffffffffffffffff
[ 1.719012] t5 : ffffffff80e0f6d8 t6 : ffffffd00411b8f0
[ 1.724321] status: 8000000201800100 badaddr: 0000000000000000 cause: 0000000000000003
[ 1.732233] [<ffffffff8023c2ec>] clk_core_disable+0xcc/0xec
[ 1.737810] [<ffffffff80240430>] clk_disable+0x38/0x78
[ 1.742956] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
[ 1.748451] [<ffffffff8031a500>] stmmac_remove_config_dt+0x1c/0x4c
[ 1.754646] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c
[ 1.760484] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
[ 1.765975] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0
[ 1.771382] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c
[ 1.777305] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148
[ 1.783402] [<ffffffff8029873c>] driver_probe_device+0x38/0x138
[ 1.789324] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170
[ 1.795508] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0
[ 1.802125] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4
[ 1.807701] [<ffffffff80298d1c>] __device_attach+0xd8/0x184
[ 1.813277] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc
[ 1.818852] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4
[ 1.825122] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390
[ 1.830872] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8
[ 1.836362] [<ffffffff80026bf4>] kthreadd+0x94/0x188
[ 1.841335] [<ffffffff80026bf4>] kthreadd+0x94/0x188
[ 1.846304] [<ffffffff8001fa60>] process_one_work+0x38c/0x390
[ 1.852054] [<ffffffff80026564>] kthread+0x124/0x160
[ 1.857021] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60
[ 1.862770] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc
[ 1.868956] ---[ end trace 8d5c6046255f84a0 ]---
[ 1.873675] ------------[ cut here ]------------
[ 1.878366] bus-emac already unprepared
[ 1.882378] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:810 clk_core_unprepare+0xe4/0x168
[ 1.890673] CPU: 0 PID: 38 Comm: kworker/u2:1 Tainted: G W 5.14.0-rc4 #1
[ 1.898674] Hardware name: Allwinner D1 NeZha (DT)
[ 1.903464] Workqueue: events_unbound deferred_probe_work_func
[ 1.909305] epc : clk_core_unprepare+0xe4/0x168
[ 1.913840] ra : clk_core_unprepare+0xe4/0x168
[ 1.918375] epc : ffffffff8023d6cc ra : ffffffff8023d6cc sp : ffffffd00411bb10
[ 1.925593] gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : 0000000000000002
[ 1.932811] t1 : ffffffe01f743be0 t2 : 0000000000000040 s0 : ffffffe001509e00
[ 1.940029] s1 : 0000000000000001 a0 : 000000000000001b a1 : ffffffe00143a800
[ 1.947246] a2 : 0000000000000000 a3 : 00000000000000f4 a4 : 0000000000000001
[ 1.954463] a5 : 0000000000000000 a6 : 0000000005fce2a5 a7 : 0000000000000001
[ 1.961680] s2 : 0000000000000800 s3 : ffffffff80afeb90 s4 : ffffffe01fdf7a80
[ 1.968898] s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff
[ 1.976115] s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000
[ 1.983333] s11: ffffffe001b80760 t3 : ffffffff80b39120 t4 : 0000000000000001
[ 1.990550] t5 : 0000000000000000 t6 : ffffffe001600002
[ 1.995859] status: 8000000201800120 badaddr: 0000000000000000 cause: 0000000000000003
[ 2.003771] [<ffffffff8023d6cc>] clk_core_unprepare+0xe4/0x168
[ 2.009609] [<ffffffff802403a0>] clk_unprepare+0x24/0x3c
[ 2.014929] [<ffffffff8031a508>] stmmac_remove_config_dt+0x24/0x4c
[ 2.021125] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c
[ 2.026965] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
[ 2.032463] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0
[ 2.037871] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c
[ 2.043795] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148
[ 2.049892] [<ffffffff8029873c>] driver_probe_device+0x38/0x138
[ 2.055815] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170
[ 2.061999] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0
[ 2.068616] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4
[ 2.074193] [<ffffffff80298d1c>] __device_attach+0xd8/0x184
[ 2.079769] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc
[ 2.085345] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4
[ 2.091616] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390
[ 2.097367] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8
[ 2.102858] [<ffffffff80026bf4>] kthreadd+0x94/0x188
[ 2.107830] [<ffffffff80026bf4>] kthreadd+0x94/0x188
[ 2.112800] [<ffffffff8001fa60>] process_one_work+0x38c/0x390
[ 2.118551] [<ffffffff80026564>] kthread+0x124/0x160
[ 2.123520] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60
[ 2.129268] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc
[ 2.135455] ---[ end trace 8d5c6046255f84a1 ]---
Fixes: 5ec55823438e ("net: stmmac: add clocks management for gmac driver")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 'tail' and 'head' are 'unsigned int' type free-running count, when
'head' is overflow, the 'int i (= tail) < u32 head' will be false:
Only '- loop 0: idx = 63' result is shown, so it needs to use 'int' type
to compare, it can handle the overflow correctly.
typedef uint32_t u32;
int main()
{
u32 tail, head;
int stail, shead;
int i, loop;
tail = 0xffffffff;
head = 0x00000000;
for (i = tail, loop = 0; i < head; i++) {
unsigned int idx = i & 63;
printf("+ loop %d: idx = %u\n", loop++, idx);
}
stail = tail;
shead = head;
for (i = stail, loop = 0; i < shead; i++) {
unsigned int idx = i & 63;
printf("- loop %d: idx = %u\n", loop++, idx);
}
return 0;
}
Fixes: 5cdad90de62c ("gve: Batch AQ commands for creating and destroying queues.")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
speed request.
Variable clk_sel_val is not initialized in the default case of the first switch statement.
In that case, the function should return immediately without any changes to the hardware.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: b38dd98ff8d0 ("net: stmmac: Add Toshiba Visconti SoCs glue driver")
Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ensure to reset the tx_timer_active flag in xgbe_stop(),
otherwise a port restart may result in tx timeout due to
uncleared flag.
Fixes: c635eaacbf77 ("amd-xgbe: Remove Tx coalescing")
Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20220127060222.453371-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There will be BUG_ON() triggered in include/linux/skbuff.h leading to
intermittent kernel panic, when the skb length underflow is detected.
Fix this by dropping the packet if such length underflows are seen
because of inconsistencies in the hardware descriptors.
Fixes: 622c36f143fc ("amd-xgbe: Fix jumbo MTU processing on newer hardware")
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20220127092003.2812745-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When readl_poll_timeout() timeout, we'd better directly use its return
value.
Before this patch:
[ 2.145528] dwmac-sun8i: probe of 4500000.ethernet failed with error -14
After this patch:
[ 2.138520] dwmac-sun8i: probe of 4500000.ethernet failed with error -110
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When resume from suspend, besides skipping PTP registration, it also
skipping PTP HW initialization. This could cause PTP clock not able to
operate properly when resume from suspend.
To fix this, only stmmac_ptp_register() is skipped when resume from
suspend.
Fixes: fe1319291150 ("stmmac: Don't init ptp again when resume from suspend/hibernation")
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For Intel platform, it is required to configure PTP clock source prior PTP
initialization in MAC. So, need to move ptp_clk_freq_config execution from
stmmac_ptp_register() to stmmac_init_ptp().
Fixes: 76da35dc99af ("stmmac: intel: Add PSE and PCH PTP clock source selection")
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use GFP_ATOMIC when allocating pages out of the hotpath,
continue to use GFP_KERNEL when allocating pages during setup.
GFP_KERNEL will allow blocking which allows it to succeed
more often in a low memory enviornment but in the hotpath we do
not want to allow the allocation to block.
Fixes: f5cedc84a30d2 ("gve: Add transmit and receive support")
Signed-off-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David Awogbemila <awogbemila@google.com>
Link: https://lore.kernel.org/r/20220126003843.3584521-1-awogbemila@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function lan966x_mac_wait_for_completion is used to poll the status
of the MAC table using the function readx_poll_timeout. The problem with
this function is that is called also from atomic context. Therefore
update the function to use readx_poll_timeout_atomic.
Fixes: e18aba8941b40b ("net: lan966x: add mactable support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On lan966x, when injecting a frame it was polling the register
QS_INJ_STATUS to see if it can continue with the injection of the frame.
The problem was that it was using readx_poll_timeout which could sleep
in atomic context.
This patch fixes this issue by using readx_poll_timeout_atomic.
Fixes: d28d6d2e37d10d ("net: lan966x: add port module support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
netdev->dev_addr is const now.
Compile tested rpc_defconfig w/ GCC 8.5.
Fixes: adeef3e32146 ("net: constify netdev->dev_addr")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
netdev->dev_addr is const now.
Compile tested rpc_defconfig w/ GCC 8.5.
Fixes: adeef3e32146 ("net: constify netdev->dev_addr")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
netdev->dev_addr is const now.
Compile tested rpc_defconfig w/ GCC 8.5.
Fixes: adeef3e32146 ("net: constify netdev->dev_addr")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
netdev->dev_addr is const now.
Compile tested bigsur_defconfig and sb1250_swarm_defconfig.
Fixes: adeef3e32146 ("net: constify netdev->dev_addr")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
netdev->dev_addr is const now.
Maintain the questionable offsetting in ndo_set_mac_address.
Compile tested holly_defconfig and mpc7448_hpc2_defconfig.
Fixes: adeef3e32146 ("net: constify netdev->dev_addr")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This driver casts off the const and writes directly to netdev->dev_addr.
This will result in a MAC address tree corruption and a warning.
Compile tested ppc6xx_defconfig.
Fixes: adeef3e32146 ("net: constify netdev->dev_addr")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Copy scattered mac address octets into an array then eth_hw_addr_set().
Fixes: adeef3e32146 ("net: constify netdev->dev_addr")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://lore.kernel.org/r/20220125144007.64407-1-tsbogend@alpha.franken.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since some interrupt states may be cleared by hardware, the driver
may receive an empty interrupt. Currently, the VF driver directly
disables the vector0 interrupt in this case. As a result, the VF
is unavailable. Therefore, the vector0 interrupt should be enabled
in this case.
Fixes: b90fcc5bd904 ("net: hns3: add reset handling for VF when doing Core/Global/IMP reset")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recent changes made netdev->dev_addr const, and it's passed
directly to mpc52xx_fec_set_paddr().
Similar problem exists on the probe patch, the driver needs
to call eth_hw_addr_set().
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: adeef3e32146 ("net: constify netdev->dev_addr")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The cpsw driver didn't properly initialise the struct page_pool_params
before calling page_pool_create(), which leads to crashes after the struct
has been expanded with new parameters.
The second Fixes tag below is where the buggy code was introduced, but
because the code was moved around this patch will only apply on top of the
commit in the first Fixes tag.
Fixes: c5013ac1dd0e ("net: ethernet: ti: cpsw: move set of common functions in cpsw_priv")
Fixes: 9ed4050c0d75 ("net: ethernet: ti: cpsw: add XDP support")
Reported-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|