summaryrefslogtreecommitdiff
path: root/drivers/net/gtp.c
AgeCommit message (Collapse)AuthorFilesLines
2022-08-29genetlink: start to validate reserved header bytesJakub Kicinski1-0/+1
We had historically not checked that genlmsghdr.reserved is 0 on input which prevents us from using those precious bytes in the future. One use case would be to extend the cmd field, which is currently just 8 bits wide and 256 is not a lot of commands for some core families. To make sure that new families do the right thing by default put the onus of opting out of validation on existing families. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Paul Moore <paul@paul-moore.com> (NetLabel) Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-16gtp: Fix inconsistent indentingWojciech Drewek1-1/+1
Fix the following warning as reported by smatch: New smatch warnings: drivers/net/gtp.c:1796 gtp_genl_send_echo_req() warn: inconsistent indenting Fixes: d33bd757d362 ("gtp: Implement GTP echo request") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-11gtp: Implement GTP echo requestWojciech Drewek1-37/+268
Adding GTP device through ip link creates the situation where GTP instance is not able to send GTP echo requests. Echo requests are used to check if GTP peer is still alive. With this patch, gtp_genl_ops are extended by new cmd (GTP_CMD_ECHOREQ) which allows to send echo request in the given version of GTP protocol (v0 or v1), from the given ms address to he given peer. TID is not inclued because in all path management messages it should be equal to 0. When GTP echo response is detected, multicast message is send to everyone in the gtp_genl_family. Message contains GTP version, ms address and peer address. Suggested-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-11gtp: Implement GTP echo responseWojciech Drewek1-16/+197
Adding GTP device through ip link creates the situation where there is no userspace daemon which would handle GTP messages (Echo Request for example). GTP-U instance which would not respond to echo requests would violate GTP specification. When GTP packet arrives with GTP_ECHO_REQ message type, GTP_ECHO_RSP is send to the sender. GTP_ECHO_RSP message should contain information element with GTPIE_RECOVERY tag and restart counter value. For GTPv1 restart counter is not used and should be equal to 0, for GTPv0 restart counter contains information provided from userspace(IFLA_GTP_RESTART_COUNT). Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Suggested-by: Harald Welte <laforge@gnumonks.org> Reviewed-by: Harald Welte <laforge@gnumonks.org> Tested-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-11gtp: Allow to create GTP device without FDsWojciech Drewek1-17/+84
Currently, when the user wants to create GTP device, he has to provide file handles to the sockets created in userspace (IFLA_GTP_FD0, IFLA_GTP_FD1). This behaviour is not ideal, considering the option of adding support for GTP device creation through ip link. Ip link application is not a good place to create such sockets. This patch allows to create GTP device without providing IFLA_GTP_FD0 and IFLA_GTP_FD1 arguments. If the user sets IFLA_GTP_CREATE_SOCKETS attribute, then GTP module takes care of creating UDP sockets by itself. Sockets are created with the commonly known UDP ports used for GTP protocol (GTP0_PORT and GTP1U_PORT). In this case we don't have to provide encap_destroy because no extra deinitialization is needed, everything is covered by udp_tunnel_sock_release. Note: GTP instance created with only this change applied, does not handle GTP Echo Requests. This is implemented in the following patch. Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-14net: dev: Makes sure netif_rx() can be invoked in any context.Sebastian Andrzej Siewior1-1/+1
Dave suggested a while ago (eleven years by now) "Let's make netif_rx() work in all contexts and get rid of netif_rx_ni()". Eric agreed and pointed out that modern devices should use netif_receive_skb() to avoid the overhead. In the meantime someone added another variant, netif_rx_any_context(), which behaves as suggested. netif_rx() must be invoked with disabled bottom halves to ensure that pending softirqs, which were raised within the function, are handled. netif_rx_ni() can be invoked only from process context (bottom halves must be enabled) because the function handles pending softirqs without checking if bottom halves were disabled or not. netif_rx_any_context() invokes on the former functions by checking in_interrupts(). netif_rx() could be taught to handle both cases (disabled and enabled bottom halves) by simply disabling bottom halves while invoking netif_rx_internal(). The local_bh_enable() invocation will then invoke pending softirqs only if the BH-disable counter drops to zero. Eric is concerned about the overhead of BH-disable+enable especially in regard to the loopback driver. As critical as this driver is, it will receive a shortcut to avoid the additional overhead which is not needed. Add a local_bh_disable() section in netif_rx() to ensure softirqs are handled if needed. Provide __netif_rx() which does not disable BH and has a lockdep assert to ensure that interrupts are disabled. Use this shortcut in the loopback driver and in drivers/net/*.c. Make netif_rx_ni() and netif_rx_any_context() invoke netif_rx() so they can be removed once they are no more users left. Link: https://lkml.kernel.org/r/20100415.020246.218622820.davem@davemloft.net Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06gtp: use skb_dst_update_pmtu_no_confirm() instead of direct callGyeongun Kang1-1/+1
skb_dst_update_pmtu_no_confirm() is a just wrapper function of ->update_pmtu(). So, it doesn't change logic Signed-off-by: Gyeongun Kang <kyeongun15@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28gtp: reset mac_header after decapGuillaume Nault1-0/+1
For consistency with other L3 tunnel devices, reset the mac_header pointer after decapsulation. This makes the mac_header 0 bytes long, thus making it clear that this skb has no mac_header. Compile tested only. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02gtp: Fix a typoZheng Yongjun1-1/+1
Suppport ==> Support Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-23net: icmp: pass zeroed opts from icmp{,v6}_ndo_send before sendingJason A. Donenfeld1-1/+0
The icmp{,v6}_send functions make all sorts of use of skb->cb, casting it with IPCB or IP6CB, assuming the skb to have come directly from the inet layer. But when the packet comes from the ndo layer, especially when forwarded, there's no telling what might be in skb->cb at that point. As a result, the icmp sending code risks reading bogus memory contents, which can result in nasty stack overflows such as this one reported by a user: panic+0x108/0x2ea __stack_chk_fail+0x14/0x20 __icmp_send+0x5bd/0x5c0 icmp_ndo_send+0x148/0x160 In icmp_send, skb->cb is cast with IPCB and an ip_options struct is read from it. The optlen parameter there is of particular note, as it can induce writes beyond bounds. There are quite a few ways that can happen in __ip_options_echo. For example: // sptr/skb are attacker-controlled skb bytes sptr = skb_network_header(skb); // dptr/dopt points to stack memory allocated by __icmp_send dptr = dopt->__data; // sopt is the corrupt skb->cb in question if (sopt->rr) { optlen = sptr[sopt->rr+1]; // corrupt skb->cb + skb->data soffset = sptr[sopt->rr+2]; // corrupt skb->cb + skb->data // this now writes potentially attacker-controlled data, over // flowing the stack: memcpy(dptr, sptr+sopt->rr, optlen); } In the icmpv6_send case, the story is similar, but not as dire, as only IP6CB(skb)->iif and IP6CB(skb)->dsthao are used. The dsthao case is worse than the iif case, but it is passed to ipv6_find_tlv, which does a bit of bounds checking on the value. This is easy to simulate by doing a `memset(skb->cb, 0x41, sizeof(skb->cb));` before calling icmp{,v6}_ndo_send, and it's only by good fortune and the rarity of icmp sending from that context that we've avoided reports like this until now. For example, in KASAN: BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xa0e/0x12b0 Write of size 38 at addr ffff888006f1f80e by task ping/89 CPU: 2 PID: 89 Comm: ping Not tainted 5.10.0-rc7-debug+ #5 Call Trace: dump_stack+0x9a/0xcc print_address_description.constprop.0+0x1a/0x160 __kasan_report.cold+0x20/0x38 kasan_report+0x32/0x40 check_memory_region+0x145/0x1a0 memcpy+0x39/0x60 __ip_options_echo+0xa0e/0x12b0 __icmp_send+0x744/0x1700 Actually, out of the 4 drivers that do this, only gtp zeroed the cb for the v4 case, while the rest did not. So this commit actually removes the gtp-specific zeroing, while putting the code where it belongs in the shared infrastructure of icmp{,v6}_ndo_send. This commit fixes the issue by passing an empty IPCB or IP6CB along to the functions that actually do the work. For the icmp_send, this was already trivial, thanks to __icmp_send providing the plumbing function. For icmpv6_send, this required a tiny bit of refactoring to make it behave like the v4 case, after which it was straight forward. Fixes: a2b78e9b2cac ("sunvnet: generate ICMP PTMUD messages for smaller port MTUs") Reported-by: SinYu <liuxyon@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/netdev/CAF=yD-LOF116aHub6RMe8vB8ZpnrrnoTdqhobEx+bvoA8AsP0w@mail.gmail.com/T/ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20210223131858.72082-1-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04gtp: update rx_length_errors for abnormally short packetsJonas Bonn1-2/+8
Based on work by Pravin Shelar. Update appropriate stats when packet transmission isn't possible. Signed-off-by: Jonas Bonn <jonas@norrbonn.se> Acked-by: Harald Welte <laforge@gnumonks.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04gtp: set device typeJonas Bonn1-0/+5
Set the devtype to 'gtp' when setting up the link. Signed-off-by: Jonas Bonn <jonas@norrbonn.se> Acked-by: Harald Welte <laforge@gnumonks.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04gtp: drop unnecessary call to skb_dst_dropJonas Bonn1-2/+0
The call to skb_dst_drop() is already done as part of udp_tunnel_xmit(). Signed-off-by: Jonas Bonn <jonas@norrbonn.se> Acked-by: Harald Welte <laforge@gnumonks.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04gtp: really check namespaces before xmitJonas Bonn1-1/+3
Blindly assuming that packet transmission crosses namespaces results in skb marks being lost in the single namespace case. Signed-off-by: Jonas Bonn <jonas@norrbonn.se> Acked-by: Harald Welte <laforge@gnumonks.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04gtp: include role in link infoJonas Bonn1-1/+4
Querying link info for the GTP interface doesn't reveal in which "role" the device is set to operate. Include this information in the info query result. Signed-off-by: Jonas Bonn <jonas@norrbonn.se> Acked-by: Harald Welte <laforge@gnumonks.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04gtp: set initial MTUJonas Bonn1-5/+6
The GTP link is brought up with a default MTU of zero. This can lead to some rather unexpected behaviour for users who are more accustomed to interfaces coming online with reasonable defaults. This patch sets an initial MTU for the GTP link of 1500 less worst-case tunnel overhead. Signed-off-by: Jonas Bonn <jonas@norrbonn.se> Acked-by: Harald Welte <laforge@gnumonks.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04Revert "GTP: add support for flow based tunneling API"Jonas Bonn1-383/+144
This reverts commit 9ab7e76aefc97a9aa664accb59d6e8dc5e52514a. This patch was committed without maintainer approval and despite a number of unaddressed concerns from review. There are several issues that impede the acceptance of this patch and that make a reversion of this particular instance of these changes the best way forward: i) the patch contains several logically separate changes that would be better served as smaller patches (for review purposes) ii) functionality like the handling of end markers has been introduced without further explanation iii) symmetry between the handling of GTPv0 and GTPv1 has been unnecessarily broken iv) the patchset produces 'broken' packets when extension headers are included v) there are no available userspace tools to allow for testing this functionality vi) there is an unaddressed Coverity report against the patch concering memory leakage vii) most importantly, the patch contains a large amount of superfluous churn that impedes other ongoing work with this driver This patch will be reworked into a series that aligns with other ongoing work and facilitates review. Signed-off-by: Jonas Bonn <jonas@norrbonn.se> Acked-by: Harald Welte <laforge@gnumonks.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-16GTP: add support for flow based tunneling APIPravin B Shelar1-144/+383
Following patch add support for flow based tunneling API to send and recv GTP tunnel packet over tunnel metadata API. This would allow this device integration with OVS or eBPF using flow based tunneling APIs. Signed-off-by: Pravin B Shelar <pbshelar@fb.com> Link: https://lore.kernel.org/r/20210110070021.26822-1-pbshelar@fb.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-10gtp: switch to dev_get_tstats64Heiner Kallweit1-1/+1
Replace ip_tunnel_get_stats64() with the new identical core function dev_get_tstats64(). Acked-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-29gtp: fix an use-before-init in gtp_newlink()Masahiro Fujiwara1-8/+8
*_pdp_find() from gtp_encap_recv() would trigger a crash when a peer sends GTP packets while creating new GTP device. RIP: 0010:gtp1_pdp_find.isra.0+0x68/0x90 [gtp] <SNIP> Call Trace: <IRQ> gtp_encap_recv+0xc2/0x2e0 [gtp] ? gtp1_pdp_find.isra.0+0x90/0x90 [gtp] udp_queue_rcv_one_skb+0x1fe/0x530 udp_queue_rcv_skb+0x40/0x1b0 udp_unicast_rcv_skb.isra.0+0x78/0x90 __udp4_lib_rcv+0x5af/0xc70 udp_rcv+0x1a/0x20 ip_protocol_deliver_rcu+0xc5/0x1b0 ip_local_deliver_finish+0x48/0x50 ip_local_deliver+0xe5/0xf0 ? ip_protocol_deliver_rcu+0x1b0/0x1b0 gtp_encap_enable() should be called after gtp_hastable_new() otherwise *_pdp_find() will access the uninitialized hash table. Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional") Signed-off-by: Masahiro Fujiwara <fujiwara.masahiro@gmail.com> Link: https://lore.kernel.org/r/20201027114846.3924-1-fujiwara.masahiro@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-06gtp: use dev_sw_netstats_rx_add()Fabian Frederick1-7/+1
use new helper for netstats settings Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-03genetlink: move to smaller ops wherever possibleJakub Kicinski1-3/+3
Bulk of the genetlink users can use smaller ops, move them. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+1
We got slightly different patches removing a double word in a comment in net/ipv4/raw.c - picked the version from net. Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached values instead of VNIC login response buffer (following what commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login response buffer") did). Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-08-31gtp: relax alloc constraint when adding a pdpNicolas Dichtel1-5/+5
When a PDP context is added, the rtnl lock is held, thus no need to force a GFP_ATOMIC. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31gtp: remove useless rcu_read_lock()Nicolas Dichtel1-2/+0
The rtnl lock is taken just the line above, no need to take the rcu also. Fixes: 1788b8569f5d ("gtp: fix use-after-free in gtp_encap_destroy()") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27gtp: add notification mechanismNicolas Dichtel1-9/+49
Like all other network functions, let's notify gtp context on creation and deletion. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: Gabriel Ganne <gabriel.ganne@6wind.com> Acked-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25gtp: add GTPA_LINK info to msg sent to userspaceNicolas Dichtel1-0/+1
During a dump, this attribute is essential, it enables the userspace to know on which interface the context is linked to. Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: Gabriel Ganne <gabriel.ganne@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02gtp: set NLM_F_MULTI flag in gtp_genl_dump_pdp()Yoshiyuki Kurauchi1-4/+5
In drivers/net/gtp.c, gtp_genl_dump_pdp() should set NLM_F_MULTI flag since it returns multipart message. This patch adds a new arg "flags" in gtp_genl_fill_info() so that flags can be set by the callers. Signed-off-by: Yoshiyuki Kurauchi <ahochauwaaaaa@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14gtp: use icmp_ndo_send helperJason A. Donenfeld1-2/+2
Because gtp is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-04gtp: use __GFP_NOWARN to avoid memalloc warningTaehee Yoo1-2/+2
gtp hashtable size is received by user-space. So, this hashtable size could be too large. If so, kmalloc will internally print a warning message. This warning message is actually not necessary for the gtp module. So, this patch adds __GFP_NOWARN to avoid this message. Splat looks like: [ 2171.200049][ T1860] WARNING: CPU: 1 PID: 1860 at mm/page_alloc.c:4713 __alloc_pages_nodemask+0x2f3/0x740 [ 2171.238885][ T1860] Modules linked in: gtp veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv] [ 2171.262680][ T1860] CPU: 1 PID: 1860 Comm: gtp-link Not tainted 5.5.0+ #321 [ 2171.263567][ T1860] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 2171.264681][ T1860] RIP: 0010:__alloc_pages_nodemask+0x2f3/0x740 [ 2171.265332][ T1860] Code: 64 fe ff ff 65 48 8b 04 25 c0 0f 02 00 48 05 f0 12 00 00 41 be 01 00 00 00 49 89 47 0 [ 2171.267301][ T1860] RSP: 0018:ffff8880b51af1f0 EFLAGS: 00010246 [ 2171.268320][ T1860] RAX: ffffed1016a35e43 RBX: 0000000000000000 RCX: 0000000000000000 [ 2171.269517][ T1860] RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000000000 [ 2171.270305][ T1860] RBP: 0000000000040cc0 R08: ffffed1018893109 R09: dffffc0000000000 [ 2171.275973][ T1860] R10: 0000000000000001 R11: ffffed1018893108 R12: 1ffff11016a35e43 [ 2171.291039][ T1860] R13: 000000000000000b R14: 000000000000000b R15: 00000000000f4240 [ 2171.292328][ T1860] FS: 00007f53cbc83740(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 2171.293409][ T1860] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2171.294586][ T1860] CR2: 000055f540014508 CR3: 00000000b49f2004 CR4: 00000000000606e0 [ 2171.295424][ T1860] Call Trace: [ 2171.295756][ T1860] ? mark_held_locks+0xa5/0xe0 [ 2171.296659][ T1860] ? __alloc_pages_slowpath+0x21b0/0x21b0 [ 2171.298283][ T1860] ? gtp_encap_enable_socket+0x13e/0x400 [gtp] [ 2171.298962][ T1860] ? alloc_pages_current+0xc1/0x1a0 [ 2171.299475][ T1860] kmalloc_order+0x22/0x80 [ 2171.299936][ T1860] kmalloc_order_trace+0x1d/0x140 [ 2171.300437][ T1860] __kmalloc+0x302/0x3a0 [ 2171.300896][ T1860] gtp_newlink+0x293/0xba0 [gtp] [ ... ] Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-4/+6
Minor conflict in mlx5 because changes happened to code that has moved meanwhile. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23gtp: make sure only SOCK_DGRAM UDP sockets are acceptedEric Dumazet1-4/+6
A malicious user could use RAW sockets and fool GTP using them as standard SOCK_DGRAM UDP sockets. BUG: KMSAN: uninit-value in udp_tunnel_encap_enable include/net/udp_tunnel.h:174 [inline] BUG: KMSAN: uninit-value in setup_udp_tunnel_sock+0x45e/0x6f0 net/ipv4/udp_tunnel.c:85 CPU: 0 PID: 11262 Comm: syz-executor613 Not tainted 5.5.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 udp_tunnel_encap_enable include/net/udp_tunnel.h:174 [inline] setup_udp_tunnel_sock+0x45e/0x6f0 net/ipv4/udp_tunnel.c:85 gtp_encap_enable_socket+0x37f/0x5a0 drivers/net/gtp.c:827 gtp_encap_enable drivers/net/gtp.c:844 [inline] gtp_newlink+0xfb/0x1e50 drivers/net/gtp.c:666 __rtnl_newlink net/core/rtnetlink.c:3305 [inline] rtnl_newlink+0x2973/0x3920 net/core/rtnetlink.c:3363 rtnetlink_rcv_msg+0x1153/0x1570 net/core/rtnetlink.c:5424 netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5442 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x451/0x5f0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x441359 Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fff1cd0ac28 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441359 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00000000006cb018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 00000000004002c8 R11: 0000000000000246 R12: 00000000004020d0 R13: 0000000000402160 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags+0x3c/0x90 mm/kmsan/kmsan.c:144 kmsan_internal_alloc_meta_for_pages mm/kmsan/kmsan_shadow.c:307 [inline] kmsan_alloc_page+0x12a/0x310 mm/kmsan/kmsan_shadow.c:336 __alloc_pages_nodemask+0x57f2/0x5f60 mm/page_alloc.c:4800 alloc_pages_current+0x67d/0x990 mm/mempolicy.c:2207 alloc_pages include/linux/gfp.h:534 [inline] alloc_slab_page+0x111/0x12f0 mm/slub.c:1511 allocate_slab mm/slub.c:1656 [inline] new_slab+0x2bc/0x1130 mm/slub.c:1722 new_slab_objects mm/slub.c:2473 [inline] ___slab_alloc+0x1533/0x1f30 mm/slub.c:2624 __slab_alloc mm/slub.c:2664 [inline] slab_alloc_node mm/slub.c:2738 [inline] slab_alloc mm/slub.c:2783 [inline] kmem_cache_alloc+0xb23/0xd70 mm/slub.c:2788 sk_prot_alloc+0xf2/0x620 net/core/sock.c:1597 sk_alloc+0xf0/0xbe0 net/core/sock.c:1657 inet_create+0x7c7/0x1370 net/ipv4/af_inet.c:321 __sock_create+0x8eb/0xf00 net/socket.c:1420 sock_create net/socket.c:1471 [inline] __sys_socket+0x1a1/0x600 net/socket.c:1513 __do_sys_socket net/socket.c:1522 [inline] __se_sys_socket+0x8d/0xb0 net/socket.c:1520 __x64_sys_socket+0x4a/0x70 net/socket.c:1520 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Pablo Neira <pablo@netfilter.org> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-2/+3
The ungrafting from PRIO bug fixes in net, when merged into net-next, merge cleanly but create a build failure. The resolution used here is from Petr Machata. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-08gtp: fix bad unlock balance in gtp_encap_enable_socketEric Dumazet1-2/+3
WARNING: bad unlock balance detected! 5.5.0-rc5-syzkaller #0 Not tainted ------------------------------------- syz-executor921/9688 is trying to release lock (sk_lock-AF_INET6) at: [<ffffffff84bf8506>] gtp_encap_enable_socket+0x146/0x400 drivers/net/gtp.c:830 but there are no more locks to release! other info that might help us debug this: 2 locks held by syz-executor921/9688: #0: ffffffff8a4d8840 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:72 [inline] #0: ffffffff8a4d8840 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x405/0xaf0 net/core/rtnetlink.c:5421 #1: ffff88809304b560 (slock-AF_INET6){+...}, at: spin_lock_bh include/linux/spinlock.h:343 [inline] #1: ffff88809304b560 (slock-AF_INET6){+...}, at: release_sock+0x20/0x1c0 net/core/sock.c:2951 stack backtrace: CPU: 0 PID: 9688 Comm: syz-executor921 Not tainted 5.5.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_unlock_imbalance_bug kernel/locking/lockdep.c:4008 [inline] print_unlock_imbalance_bug.cold+0x114/0x123 kernel/locking/lockdep.c:3984 __lock_release kernel/locking/lockdep.c:4242 [inline] lock_release+0x5f2/0x960 kernel/locking/lockdep.c:4503 sock_release_ownership include/net/sock.h:1496 [inline] release_sock+0x17c/0x1c0 net/core/sock.c:2961 gtp_encap_enable_socket+0x146/0x400 drivers/net/gtp.c:830 gtp_encap_enable drivers/net/gtp.c:852 [inline] gtp_newlink+0x9fc/0xc60 drivers/net/gtp.c:666 __rtnl_newlink+0x109e/0x1790 net/core/rtnetlink.c:3305 rtnl_newlink+0x69/0xa0 net/core/rtnetlink.c:3363 rtnetlink_rcv_msg+0x45e/0xaf0 net/core/rtnetlink.c:5424 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x58c/0x7d0 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:659 ____sys_sendmsg+0x753/0x880 net/socket.c:2330 ___sys_sendmsg+0x100/0x170 net/socket.c:2384 __sys_sendmsg+0x105/0x1d0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg net/socket.c:2424 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2424 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x445d49 Code: e8 bc b7 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 12 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f8019074db8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000006dac38 RCX: 0000000000445d49 RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003 RBP: 00000000006dac30 R08: 0000000000000004 R09: 0000000000000000 R10: 0000000000000008 R11: 0000000000000246 R12: 00000000006dac3c R13: 00007ffea687f6bf R14: 00007f80190759c0 R15: 20c49ba5e353f7cf Fixes: e198987e7dd7 ("gtp: fix suspicious RCU usage") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-07gtp: simplify error handling code in 'gtp_encap_enable()'Christophe JAILLET1-6/+3
'gtp_encap_disable_sock(sk)' handles the case where sk is NULL, so there is no need to test it before calling the function. This saves a few line of code. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25gtp: do not confirm neighbor when do pmtu updateHangbin Liu1-1/+1
When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end, we should not call dst_confirm_neigh() as there is no two-way communication. Although GTP only support ipv4 right now, and __ip_rt_update_pmtu() does not call dst_confirm_neigh(), we still set it to false to keep consistency with IPv6 code. v5: No change. v4: No change. v3: Do not remove dst_confirm_neigh, but add a new bool parameter in dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area. v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu. Reviewed-by: Guillaume Nault <gnault@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25net: add bool confirm_neigh parameter for dst_ops.update_pmtuHangbin Liu1-1/+1
The MTU update code is supposed to be invoked in response to real networking events that update the PMTU. In IPv6 PMTU update function __ip6_rt_update_pmtu() we called dst_confirm_neigh() to update neighbor confirmed time. But for tunnel code, it will call pmtu before xmit, like: - tnl_update_pmtu() - skb_dst_update_pmtu() - ip6_rt_update_pmtu() - __ip6_rt_update_pmtu() - dst_confirm_neigh() If the tunnel remote dst mac address changed and we still do the neigh confirm, we will not be able to update neigh cache and ping6 remote will failed. So for this ip_tunnel_xmit() case, _EVEN_ if the MTU is changed, we should not be invoking dst_confirm_neigh() as we have no evidence of successful two-way communication at this point. On the other hand it is also important to keep the neigh reachability fresh for TCP flows, so we cannot remove this dst_confirm_neigh() call. To fix the issue, we have to add a new bool parameter for dst_ops.update_pmtu to choose whether we should do neigh update or not. I will add the parameter in this patch and set all the callers to true to comply with the previous way, and fix the tunnel code one by one on later patches. v5: No change. v4: No change. v3: Do not remove dst_confirm_neigh, but add a new bool parameter in dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area. v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu. Suggested-by: David Miller <davem@davemloft.net> Reviewed-by: Guillaume Nault <gnault@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15gtp: avoid zero size hashtableTaehee Yoo1-2/+5
GTP default hashtable size is 1024 and userspace could set specific hashtable size with IFLA_GTP_PDP_HASHSIZE. If hashtable size is set to 0 from userspace, hashtable will not work and panic will occur. Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-12-15gtp: fix an use-after-free in ipv4_pdp_find()Taehee Yoo1-17/+17
ipv4_pdp_find() is called in TX packet path of GTP. ipv4_pdp_find() internally uses gtp->tid_hash to lookup pdp context. In the current code, gtp->tid_hash and gtp->addr_hash are freed by ->dellink(), which is gtp_dellink(). But gtp_dellink() would be called while packets are processing. So, gtp_dellink() should not free gtp->tid_hash and gtp->addr_hash. Instead, dev->priv_destructor() would be used because this callback is called after all packet processing safely. Test commands: ip link add veth1 type veth peer name veth2 ip a a 172.0.0.1/24 dev veth1 ip link set veth1 up ip a a 172.99.0.1/32 dev lo gtp-link add gtp1 & gtp-tunnel add gtp1 v1 200 100 172.99.0.2 172.0.0.2 ip r a 172.99.0.2/32 dev gtp1 ip link set gtp1 mtu 1500 ip netns add ns2 ip link set veth2 netns ns2 ip netns exec ns2 ip a a 172.0.0.2/24 dev veth2 ip netns exec ns2 ip link set veth2 up ip netns exec ns2 ip a a 172.99.0.2/32 dev lo ip netns exec ns2 ip link set lo up ip netns exec ns2 gtp-link add gtp2 & ip netns exec ns2 gtp-tunnel add gtp2 v1 100 200 172.99.0.1 172.0.0.1 ip netns exec ns2 ip r a 172.99.0.1/32 dev gtp2 ip netns exec ns2 ip link set gtp2 mtu 1500 hping3 172.99.0.2 -2 --flood & ip link del gtp1 Splat looks like: [ 72.568081][ T1195] BUG: KASAN: use-after-free in ipv4_pdp_find.isra.12+0x130/0x170 [gtp] [ 72.568916][ T1195] Read of size 8 at addr ffff8880b9a35d28 by task hping3/1195 [ 72.569631][ T1195] [ 72.569861][ T1195] CPU: 2 PID: 1195 Comm: hping3 Not tainted 5.5.0-rc1 #199 [ 72.570547][ T1195] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 72.571438][ T1195] Call Trace: [ 72.571764][ T1195] dump_stack+0x96/0xdb [ 72.572171][ T1195] ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp] [ 72.572761][ T1195] print_address_description.constprop.5+0x1be/0x360 [ 72.573400][ T1195] ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp] [ 72.573971][ T1195] ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp] [ 72.574544][ T1195] __kasan_report+0x12a/0x16f [ 72.575014][ T1195] ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp] [ 72.575593][ T1195] kasan_report+0xe/0x20 [ 72.576004][ T1195] ipv4_pdp_find.isra.12+0x130/0x170 [gtp] [ 72.576577][ T1195] gtp_build_skb_ip4+0x199/0x1420 [gtp] [ ... ] [ 72.647671][ T1195] BUG: unable to handle page fault for address: ffff8880b9a35d28 [ 72.648512][ T1195] #PF: supervisor read access in kernel mode [ 72.649158][ T1195] #PF: error_code(0x0000) - not-present page [ 72.649849][ T1195] PGD a6c01067 P4D a6c01067 PUD 11fb07067 PMD 11f939067 PTE 800fffff465ca060 [ 72.652958][ T1195] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 72.653834][ T1195] CPU: 2 PID: 1195 Comm: hping3 Tainted: G B 5.5.0-rc1 #199 [ 72.668062][ T1195] RIP: 0010:ipv4_pdp_find.isra.12+0x86/0x170 [gtp] [ ... ] [ 72.679168][ T1195] Call Trace: [ 72.679603][ T1195] gtp_build_skb_ip4+0x199/0x1420 [gtp] [ 72.681915][ T1195] ? ipv4_pdp_find.isra.12+0x170/0x170 [gtp] [ 72.682513][ T1195] ? lock_acquire+0x164/0x3b0 [ 72.682966][ T1195] ? gtp_dev_xmit+0x35e/0x890 [gtp] [ 72.683481][ T1195] gtp_dev_xmit+0x3c2/0x890 [gtp] [ ... ] Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-12-15gtp: fix wrong condition in gtp_genl_dump_pdp()Taehee Yoo1-17/+19
gtp_genl_dump_pdp() is ->dumpit() callback of GTP module and it is used to dump pdp contexts. it would be re-executed because of dump packet size. If dump packet size is too big, it saves current dump pointer (gtp interface pointer, bucket, TID value) then it restarts dump from last pointer. Current GTP code allows adding zero TID pdp context but dump code ignores zero TID value. So, last dump pointer will not be found. In addition, this patch adds missing rcu_read_lock() in gtp_genl_dump_pdp(). Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-12-15gtp: do not allow adding duplicate tid and ms_addr pdp contextTaehee Yoo1-10/+22
GTP RX packet path lookups pdp context with TID. If duplicate TID pdp contexts are existing in the list, it couldn't select correct pdp context. So, TID value should be unique. GTP TX packet path lookups pdp context with ms_addr. If duplicate ms_addr pdp contexts are existing in the list, it couldn't select correct pdp context. So, ms_addr value should be unique. Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-07-08gtp: add missing gtp_encap_disable_sock() in gtp_encap_enable()Taehee Yoo1-1/+6
If an invalid role is sent from user space, gtp_encap_enable() will fail. Then, it should call gtp_encap_disable_sock() but current code doesn't. It makes memory leak. Fixes: 91ed81f9abc7 ("gtp: support SGSN-side tunnels") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08gtp: fix use-after-free in gtp_newlink()Taehee Yoo1-1/+1
Current gtp_newlink() could be called after unregister_pernet_subsys(). gtp_newlink() uses gtp_net but it can be destroyed by unregister_pernet_subsys(). So unregister_pernet_subsys() should be called after rtnl_link_unregister(). Test commands: #SHELL 1 while : do for i in {1..5} do ./gtp-link add gtp$i & done killall gtp-link done #SHELL 2 while : do modprobe -rv gtp done Splat looks like: [ 753.176631] BUG: KASAN: use-after-free in gtp_newlink+0x9b4/0xa5c [gtp] [ 753.177722] Read of size 8 at addr ffff8880d48f2458 by task gtp-link/7126 [ 753.179082] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G W 5.2.0-rc6+ #50 [ 753.185801] Call Trace: [ 753.186264] dump_stack+0x7c/0xbb [ 753.186863] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.187583] print_address_description+0xc7/0x240 [ 753.188382] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.189097] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.189846] __kasan_report+0x12a/0x16f [ 753.190542] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.191298] kasan_report+0xe/0x20 [ 753.191893] gtp_newlink+0x9b4/0xa5c [gtp] [ 753.192580] ? __netlink_ns_capable+0xc3/0xf0 [ 753.193370] __rtnl_newlink+0xb9f/0x11b0 [ ... ] [ 753.241201] Allocated by task 7186: [ 753.241844] save_stack+0x19/0x80 [ 753.242399] __kasan_kmalloc.constprop.3+0xa0/0xd0 [ 753.243192] __kmalloc+0x13e/0x300 [ 753.243764] ops_init+0xd6/0x350 [ 753.244314] register_pernet_operations+0x249/0x6f0 [ ... ] [ 753.251770] Freed by task 7178: [ 753.252288] save_stack+0x19/0x80 [ 753.252833] __kasan_slab_free+0x111/0x150 [ 753.253962] kfree+0xc7/0x280 [ 753.254509] ops_free_list.part.11+0x1c4/0x2d0 [ 753.255241] unregister_pernet_operations+0x262/0x390 [ ... ] [ 753.285883] list_add corruption. next->prev should be prev (ffff8880d48f2458), but was ffff8880d497d878. (next. [ 753.287241] ------------[ cut here ]------------ [ 753.287794] kernel BUG at lib/list_debug.c:25! [ 753.288364] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 753.289099] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G B W 5.2.0-rc6+ #50 [ 753.291036] RIP: 0010:__list_add_valid+0x74/0xd0 [ 753.291589] Code: 48 39 da 75 27 48 39 f5 74 36 48 39 dd 74 31 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 89 d9 48b [ 753.293779] RSP: 0018:ffff8880cae8f398 EFLAGS: 00010286 [ 753.294401] RAX: 0000000000000075 RBX: ffff8880d497d878 RCX: 0000000000000000 [ 753.296260] RDX: 0000000000000075 RSI: 0000000000000008 RDI: ffffed10195d1e69 [ 753.297070] RBP: ffff8880cd250ae0 R08: ffffed101b4bff21 R09: ffffed101b4bff21 [ 753.297899] R10: 0000000000000001 R11: ffffed101b4bff20 R12: ffff8880d497d878 [ 753.298703] R13: 0000000000000000 R14: ffff8880cd250ae0 R15: ffff8880d48f2458 [ 753.299564] FS: 00007f5f79805740(0000) GS:ffff8880da400000(0000) knlGS:0000000000000000 [ 753.300533] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 753.301231] CR2: 00007fe8c7ef4f10 CR3: 00000000b71a6006 CR4: 00000000000606f0 [ 753.302183] Call Trace: [ 753.302530] gtp_newlink+0x5f6/0xa5c [gtp] [ 753.303037] ? __netlink_ns_capable+0xc3/0xf0 [ 753.303576] __rtnl_newlink+0xb9f/0x11b0 [ 753.304092] ? rtnl_link_unregister+0x230/0x230 Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08gtp: fix Illegal context switch in RCU read-side critical section.Taehee Yoo1-1/+1
ipv4_pdp_add() is called in RCU read-side critical section. So GFP_KERNEL should not be used in the function. This patch make ipv4_pdp_add() to use GFP_ATOMIC instead of GFP_KERNEL. Test commands: gtp-link add gtp1 & gtp-tunnel add gtp1 v1 100 200 1.1.1.1 2.2.2.2 Splat looks like: [ 130.618881] ============================= [ 130.626382] WARNING: suspicious RCU usage [ 130.626994] 5.2.0-rc6+ #50 Not tainted [ 130.627622] ----------------------------- [ 130.628223] ./include/linux/rcupdate.h:266 Illegal context switch in RCU read-side critical section! [ 130.629684] [ 130.629684] other info that might help us debug this: [ 130.629684] [ 130.631022] [ 130.631022] rcu_scheduler_active = 2, debug_locks = 1 [ 130.632136] 4 locks held by gtp-tunnel/1025: [ 130.632925] #0: 000000002b93c8b7 (cb_lock){++++}, at: genl_rcv+0x15/0x40 [ 130.634159] #1: 00000000f17bc999 (genl_mutex){+.+.}, at: genl_rcv_msg+0xfb/0x130 [ 130.635487] #2: 00000000c644ed8e (rtnl_mutex){+.+.}, at: gtp_genl_new_pdp+0x18c/0x1150 [gtp] [ 130.636936] #3: 0000000007a1cde7 (rcu_read_lock){....}, at: gtp_genl_new_pdp+0x187/0x1150 [gtp] [ 130.638348] [ 130.638348] stack backtrace: [ 130.639062] CPU: 1 PID: 1025 Comm: gtp-tunnel Not tainted 5.2.0-rc6+ #50 [ 130.641318] Call Trace: [ 130.641707] dump_stack+0x7c/0xbb [ 130.642252] ___might_sleep+0x2c0/0x3b0 [ 130.642862] kmem_cache_alloc_trace+0x1cd/0x2b0 [ 130.643591] gtp_genl_new_pdp+0x6c5/0x1150 [gtp] [ 130.644371] genl_family_rcv_msg+0x63a/0x1030 [ 130.645074] ? mutex_lock_io_nested+0x1090/0x1090 [ 130.645845] ? genl_unregister_family+0x630/0x630 [ 130.646592] ? debug_show_all_locks+0x2d0/0x2d0 [ 130.647293] ? check_flags.part.40+0x440/0x440 [ 130.648099] genl_rcv_msg+0xa3/0x130 [ ... ] Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08gtp: remove duplicate code in gtp_dellink()Taehee Yoo1-1/+0
gtp_encap_disable() in gtp_dellink() is unnecessary because it will be called by unregister_netdevice(). unregister_netdevice() internally calls gtp_dev_uninit() by ->ndo_uninit(). And gtp_dev_uninit() calls gtp_encap_disable(). Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08gtp: fix use-after-free in gtp_encap_destroy()Taehee Yoo1-2/+15
gtp_encap_destroy() is called twice. 1. When interface is deleted. 2. When udp socket is destroyed. either gtp->sk0 or gtp->sk1u could be freed by sock_put() in gtp_encap_destroy(). so, when gtp_encap_destroy() is called again, it would uses freed sk pointer. patch makes gtp_encap_destroy() to set either gtp->sk0 or gtp->sk1u to null. in addition, both gtp->sk0 and gtp->sk1u pointer are protected by rtnl_lock. so, rtnl_lock() is added. Test command: gtp-link add gtp1 & killall gtp-link ip link del gtp1 Splat looks like: [ 83.182767] BUG: KASAN: use-after-free in __lock_acquire+0x3a20/0x46a0 [ 83.184128] Read of size 8 at addr ffff8880cc7d5360 by task ip/1008 [ 83.185567] CPU: 1 PID: 1008 Comm: ip Not tainted 5.2.0-rc6+ #50 [ 83.188469] Call Trace: [ ... ] [ 83.200126] lock_acquire+0x141/0x380 [ 83.200575] ? lock_sock_nested+0x3a/0xf0 [ 83.201069] _raw_spin_lock_bh+0x38/0x70 [ 83.201551] ? lock_sock_nested+0x3a/0xf0 [ 83.202044] lock_sock_nested+0x3a/0xf0 [ 83.202520] gtp_encap_destroy+0x18/0xe0 [gtp] [ 83.203065] gtp_encap_disable.isra.14+0x13/0x50 [gtp] [ 83.203687] gtp_dellink+0x56/0x170 [gtp] [ 83.204190] rtnl_delete_link+0xb4/0x100 [ ... ] [ 83.236513] Allocated by task 976: [ 83.236925] save_stack+0x19/0x80 [ 83.237332] __kasan_kmalloc.constprop.3+0xa0/0xd0 [ 83.237894] kmem_cache_alloc+0xd8/0x280 [ 83.238360] sk_prot_alloc.isra.42+0x50/0x200 [ 83.238874] sk_alloc+0x32/0x940 [ 83.239264] inet_create+0x283/0xc20 [ 83.239684] __sock_create+0x2dd/0x540 [ 83.240136] __sys_socket+0xca/0x1a0 [ 83.240550] __x64_sys_socket+0x6f/0xb0 [ 83.240998] do_syscall_64+0x9c/0x450 [ 83.241466] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 83.242061] [ 83.242249] Freed by task 0: [ 83.242616] save_stack+0x19/0x80 [ 83.243013] __kasan_slab_free+0x111/0x150 [ 83.243498] kmem_cache_free+0x89/0x250 [ 83.244444] __sk_destruct+0x38f/0x5a0 [ 83.245366] rcu_core+0x7e9/0x1c20 [ 83.245766] __do_softirq+0x213/0x8fa Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08gtp: fix suspicious RCU usageTaehee Yoo1-2/+6
gtp_encap_enable_socket() and gtp_encap_destroy() are not protected by rcu_read_lock(). and it's not safe to write sk->sk_user_data. This patch make these functions to use lock_sock() instead of rcu_dereference_sk_user_data(). Test commands: gtp-link add gtp1 Splat looks like: [ 83.238315] ============================= [ 83.239127] WARNING: suspicious RCU usage [ 83.239702] 5.2.0-rc6+ #49 Not tainted [ 83.240268] ----------------------------- [ 83.241205] drivers/net/gtp.c:799 suspicious rcu_dereference_check() usage! [ 83.243828] [ 83.243828] other info that might help us debug this: [ 83.243828] [ 83.246325] [ 83.246325] rcu_scheduler_active = 2, debug_locks = 1 [ 83.247314] 1 lock held by gtp-link/1008: [ 83.248523] #0: 0000000017772c7f (rtnl_mutex){+.+.}, at: __rtnl_newlink+0x5f5/0x11b0 [ 83.251503] [ 83.251503] stack backtrace: [ 83.252173] CPU: 0 PID: 1008 Comm: gtp-link Not tainted 5.2.0-rc6+ #49 [ 83.253271] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 83.254562] Call Trace: [ 83.254995] dump_stack+0x7c/0xbb [ 83.255567] gtp_encap_enable_socket+0x2df/0x360 [gtp] [ 83.256415] ? gtp_find_dev+0x1a0/0x1a0 [gtp] [ 83.257161] ? memset+0x1f/0x40 [ 83.257843] gtp_newlink+0x90/0xa21 [gtp] [ 83.258497] ? __netlink_ns_capable+0xc3/0xf0 [ 83.259260] __rtnl_newlink+0xb9f/0x11b0 [ 83.260022] ? rtnl_link_unregister+0x230/0x230 [ ... ] Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-28genetlink: optionally validate strictly/dumpsJohannes Berg1-0/+3
Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-22genetlink: make policy common to familyJohannes Berg1-3/+1
Since maxattr is common, the policy can't really differ sanely, so make it common as well. The only user that did in fact manage to make a non-common policy is taskstats, which has to be really careful about it (since it's still using a common maxattr!). This is no longer supported, but we can fake it using pre_doit. This reduces the size of e.g. nl80211.o (which has lots of commands): text data bss dec hex filename 398745 14323 2240 415308 6564c net/wireless/nl80211.o (before) 397913 14331 2240 414484 65314 net/wireless/nl80211.o (after) -------------------------------- -832 +8 0 -824 Which is obviously just 8 bytes for each command, and an added 8 bytes for the new policy pointer. I'm not sure why the ops list is counted as .text though. Most of the code transformations were done using the following spatch: @ops@ identifier OPS; expression POLICY; @@ struct genl_ops OPS[] = { ..., { - .policy = POLICY, }, ... }; @@ identifier ops.OPS; expression ops.POLICY; identifier fam; expression M; @@ struct genl_family fam = { .ops = OPS, .maxattr = M, + .policy = POLICY, ... }; This also gets rid of devlink_nl_cmd_region_read_dumpit() accessing the cb->data as ops, which we want to change in a later genl patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>