summaryrefslogtreecommitdiff
path: root/drivers/net/phy/dp83869.c
AgeCommit message (Collapse)AuthorFilesLines
2021-11-20net: phy: add support for TI DP83561-SP phyHari Nagalla1-20/+22
Add support for the TI DP83561-SP Gigabit ethernet phy device. The dp83561-sp is a radiation hardened space grade gigabit ethernet PHY. It has been tested for single event latch upto 121 MeV, the critical reliability parameter for space designs. It interfaces directly to twisted pair media through an external transformer. And the device also interfaces directly to the MAC layer through Reduced GMII (RGMII) and MII. DP83867, DP83869 and DP83561-SP, all these parts support 1000Base-T/ 100Base-TX/ and 10Base-Te standards and have similar register map for the core functionality. The data sheet for this part is at https://www.ti.com/product/DP83561-SP Signed-off-by: Hari Nagalla <hnagalla@ti.com> Signed-off-by: Geet Modi <geet.modi@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20211118102532.9835-1-hnagalla@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-24net: phy: constify netdev->dev_addr referencesJakub Kicinski1-2/+2
netdev->dev_addr will become a const soon(ish), constify the local variables referring to it. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12net: phy: introduce phydev->portMichael Walle1-0/+4
At the moment, PORT_MII is reported in the ethtool ops. This is odd because it is an interface between the MAC and the PHY and no external port. Some network card drivers will overwrite the port to twisted pair or fiber, though. Even worse, the MDI/MDIX setting is only used by ethtool if the port is twisted pair. Set the port to PORT_TP by default because most PHY drivers are copper ones. If there is fibre support and it is enabled, the PHY driver will set it to PORT_FIBRE. This will change reporting PORT_MII to either PORT_TP or PORT_FIBRE; except for the genphy fallback driver. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-11-25net: phy: ti: remove the use of .ack_interrupt()Ioana Ciornei1-4/+13
In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Cc: Dan Murphy <dmurphy@ti.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25net: phy: ti: implement generic .handle_interrupt() callbackIoana Ciornei1-0/+25
In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Cc: Dan Murphy <dmurphy@ti.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-04net: phy: dp83869: fix unsigned comparisons against less than zero valuesColin Ian King1-1/+1
Currently the comparisons of u16 integers value and sopass_val with less than zero for error checking is always false because the values are unsigned. Fix this by making these variables int. This does not affect the shift and mask operations performed on these variables Addresses-Coverity: ("Unsigned compared against zero") Fixes: 49fc23018ec6 ("net: phy: dp83869: support Wake on LAN") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net: phy: dp83869: Add speed optimization featureDan Murphy1-0/+116
Set the speed optimization bit on the DP83869 PHY. Speed optimization, also known as link downshift, enables fallback to 100M operation after multiple consecutive failed attempts at Gigabit link establishment. Such a case could occur if cabling with only four wires (two twisted pairs) were connected instead of the standard cabling with eight wires (four twisted pairs). The number of failed link attempts before falling back to 100M operation is configurable. By default, four failed link attempts are required before falling back to 100M. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net: phy: dp83869: support Wake on LANDan Murphy1-0/+176
This adds WoL support on TI DP83869 for magic, magic secure, unicast and broadcast. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20net: dp83869: Add ability to advertise Fiber connectionDan Murphy1-0/+73
Add the ability to advertise the Fiber connection if the strap or the op-mode is configured for 100Base-FX. Auto negotiation is not supported on this PHY when in fiber mode. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26net: dp83869: Fix RGMII internal delay configurationDaniel Gorsulowski1-6/+6
The RGMII control register at 0x32 indicates the states for the bits RGMII_TX_CLK_DELAY and RGMII_RX_CLK_DELAY as follows: RGMII Transmit/Receive Clock Delay 0x0 = RGMII transmit clock is shifted with respect to transmit/receive data. 0x1 = RGMII transmit clock is aligned with respect to transmit/receive data. This commit fixes the inversed behavior of these bits Fixes: 736b25afe284 ("net: dp83869: Add RGMII internal delay configuration") Signed-off-by: Daniel Gorsulowski <daniel.gorsulowski@esd.eu> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26net: dp83869: Add RGMII internal delay configurationDan Murphy1-3/+50
Add RGMII internal delay configuration for Rx and Tx. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-07net: dp83869: Reset return variable if PHY strap is readDan Murphy1-0/+3
When the PHY's strap register is read to determine if lane swapping is needed the phy_read_mmd returns the value back into the ret variable. If the call to read the strap fails the failed value is returned. If the call to read the strap is successful then ret is possibly set to a non-zero positive number. Without reseting the ret value to 0 this will cause the parse DT function to return a failure. Fixes: c4566aec6e808 ("net: phy: dp83869: Update port-mirroring to read straps") Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-05net: dp83869: Fix OF_MDIO config checkDan Murphy1-1/+1
When CONFIG_OF_MDIO is set to be a module the code block is not compiled. Use the IS_ENABLED macro that checks for both built in as well as module. Fixes: 01db923e83779 ("net: phy: dp83869: Add TI dp83869 phy") Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-23net: phy: dp83869: Set opmode from strapsDan Murphy1-1/+20
If the op-mode for the device is not set in the device tree then set the strapped op-mode and store it for later configuration. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-23net: phy: dp83869: Update port-mirroring to read strapsDan Murphy1-3/+12
The device tree may not have the property set for port mirroring because the hardware may have it strapped. If the property is not in the DT then check the straps and set the port mirroring bit appropriately. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15net: phy: dp83869: Remove unneeded semicolonzhengbin1-1/+1
Fixes coccicheck warning: drivers/net/phy/dp83869.c:337:2-3: Unneeded semicolon Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-27net: phy: dp83869: Fix return paths to return proper valuesDan Murphy1-23/+26
Fix the return paths for all I/O operations to ensure that the I/O completed successfully. Then pass the return to the caller for further processing Fixes: 01db923e8377 ("net: phy: dp83869: Add TI dp83869 phy") Reported-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19net: phy: dp83869: fix return of uninitialized variable retColin Ian King1-1/+1
In the case where the call to phy_interface_is_rgmii returns zero the variable ret is left uninitialized and this is returned at the end of the function dp83869_configure_rgmii. Fix this by returning 0 instead of the uninitialized value in ret. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 01db923e8377 ("net: phy: dp83869: Add TI dp83869 phy") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-15net: phy: dp83869: Add TI dp83869 phyDan Murphy1-0/+431
Add support for the TI DP83869 Gigabit ethernet phy device. The DP83869 is a robust, low power, fully featured Physical Layer transceiver with integrated PMD sublayers to support 10BASE-T, 100BASE-TX and 1000BASE-T Ethernet protocols. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-27 03:54:41 +0300