summaryrefslogtreecommitdiff
path: root/drivers/net/phy/microchip_t1.c
AgeCommit message (Collapse)AuthorFilesLines
2022-04-26net: phy: LAN937x: add interrupt support for link detectionArun Ramadoss1-0/+2
Added the config_intr and handle_interrupt for the LAN937x phy which is same as the LAN87xx phy. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220423154727.29052-1-arun.ramadoss@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-23net: phy: LAN87xx: add ethtool SQI supportArun Ramadoss1-0/+48
This patch add the support for measuring Signal Quality Index for LAN87xx and LAN937x T1 Phy. It uses the SQI Method 5 for obtaining the values. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-15net: phy: LAN937x: added PHY_POLL_CABLE_TEST flagArun Ramadoss1-0/+1
Added the phy_poll_cable_test flag for the lan937x phy driver. Tested using command - ethtool --cable-test <dev> Fixes: 680baca546f2 ("net: phy: added the LAN937x phy support") Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-11net: phy: LAN87xx: remove genphy_softreset in config_anegArun Ramadoss1-6/+1
When the T1 phy master/slave state is changed, at the end of config_aneg function genphy_softreset is called. After the reset all the registers configured during the config_init are restored to default value. To avoid this, removed the genphy_softreset call. v1->v2 ------ Added the author in cc Fixes: 8a1b415d70b7 ("net: phy: added ethtool master-slave configuration support") Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-08net: phy: lan87xx: use genphy_read_master_slave in read_statusArun Ramadoss1-29/+1
To read the master slave configuration of the LAN87xx T1 phy, used the generic phy driver genphy_read_master_slave function. Removed the local lan87xx_read_master_slave function. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-04net: phy: added ethtool master-slave configuration supportArun Ramadoss1-0/+90
To configure the T1 phy as master or slave using the ethtool -s <dev> master-slave <forced-master/forced-slave>, the config_aneg and read status functions are added. Signed-off-by: Prasanna Vengateshan <prasanna.vengateshan@microchip.com> Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04net: phy: added the LAN937x phy supportArun Ramadoss1-1/+54
LAN937x T1 switch is based on LAN87xx Phy, so reusing the init script of the LAN87xx. There is a workaround in accessing the DSP bank register for LAN937x Phy. Whenever there is a bank switch to DSP registers, then we need a one dummy read access before proceeding to the actual register access. Signed-off-by: Prasanna Vengateshan <prasanna.vengateshan@microchip.com> Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04net: phy: updated the initialization routine for LAN87xxArun Ramadoss1-42/+175
The new initialization sequence is the improvement to the existing init routine. Init routine does soft reset, run init script and set Hw_init. Added the new access_smi_poll_timeout() for polling smi bank write. Signed-off-by: Prasanna Vengateshan <prasanna.vengateshan@microchip.com> Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04net: phy: removed empty lines in LAN87XXArun Ramadoss1-4/+0
Removed the empty lines in struct phy_drivers. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04net: phy: used the PHY_ID_MATCH_MODEL macro for LAN87XXArun Ramadoss1-3/+4
Used the PHY_ID_MATCH_MODEL MACRO for describing the phy_id and phy_id_mask. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04net: phy: used genphy_soft_reset for phy reset in LAN87xxArun Ramadoss1-12/+2
Replaced the current code of resetting of LAN87xx phy to genphy_soft_reset library function. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-03net: phy: microchip_t1: add lan87xx_config_rgmii_delay for lan87xx phyYuiko Oshino1-1/+43
Add a function to initialize phy rgmii delay according to phydev->interface. Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20211101162119.29275-1-yuiko.oshino@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-28net: phy: microchip_t1: add cable test support for lan87xx phyYuiko Oshino1-0/+239
Add a basic cable test (diagnostic) support for lan87xx phy. Tested with LAN8770 for connected/open/short wires using ethtool. Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-11-17net: phy: microchip: remove the use of .ack_interrupt()Ioana Ciornei1-10/+7
In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Cc: Nisar Sayed <Nisar.Sayed@microchip.com> Cc: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: phy: microchip: implement generic .handle_interrupt() callbackIoana Ciornei1-0/+19
In an attempt to actually support shared IRQs in phylib, we now move the responsibility of triggering the phylib state machine or just returning IRQ_NONE, based on the IRQ status register, to the PHY driver. Having 3 different IRQ handling callbacks (.handle_interrupt(), .did_interrupt() and .ack_interrupt() ) is confusing so let the PHY driver implement directly an IRQ handler like any other device driver. Make this driver follow the new convention. Cc: Nisar Sayed <Nisar.Sayed@microchip.com> Cc: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-10net: phy: microchip_t1: Don't set .config_anegJisheng Zhang1-1/+0
The .config_aneg in microchip_t1 is genphy_config_aneg, so it's not needed, because the phy core will call genphy_config_aneg() if the .config_aneg is NULL. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201109091605.3951c969@xhacker.debian Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-04-22net: phy: microchip_t1: add lan87xx_phy_init to initialize the lan87xx phy.Yuiko Oshino1-0/+171
lan87xx_phy_init() initializes the lan87xx phy hardware including its TC10 Wake-up and Sleep features. Fixes: 3e50d2da5850 ("Add driver for Microchip LAN87XX T1 PHYs") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> v0->v1: - Add more details in the commit message and source comments. - Update to the latest initialization sequences. - Add access_ereg_modify_changed(). - Fix access_ereg() to access SMI bank correctly. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17net: phy: remove calls to genphy_config_initHeiner Kallweit1-1/+0
Supported PHY features are either auto-detected or explicitly set. In both cases calling genphy_config_init isn't needed. All that genphy_config_init does is removing features that are set as supported but can't be auto-detected. Basically it duplicates the code in genphy_read_abilities. Therefore remove such calls from all PHY drivers. v2: - remove call also from new adin PHY driver v3: - pass NULL as config_init function pointer for dp83848 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11net: phy: remove flag PHY_HAS_INTERRUPT from driver configsHeiner Kallweit1-1/+0
Now that flag PHY_HAS_INTERRUPT has been replaced with a check for callbacks config_intr and ack_interrupt, we can remove setting this flag from all driver configs. Last but not least remove flag PHY_HAS_INTERRUPT completely. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02net: phy: Replace phy driver features u32 with link_mode bitmapAndrew Lunn1-1/+1
This is one step in allowing phylib to make use of link_mode bitmaps, instead of u32 for supported and advertised features. Convert the phy drivers to use bitmaps to indicates the features they support. Build bitmap equivalents of the u32 values at runtime, and have the drivers point to the appropriate bitmap. These bitmaps are shared, and we don't want a driver to modify them. So mark them __ro_after_init. Within phylib, the features bitmap is currently turned back into a u32. This will be removed once the whole of phylib, and the drivers are converted to use bitmaps. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10microchip_t1: Add driver for Microchip LAN87XX T1 PHYsNisar Sayed1-0/+74
Add driver for Microchip LAN87XX T1 PHYs This patch support driver for Microchp T1 PHYs. There will be followup patches to this driver to support T1 PHY features such as cable diagnostics, signal quality indicator(SQI), sleep and wakeup (TC10) support. Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-26 22:28:30 +0300