summaryrefslogtreecommitdiff
path: root/drivers/net/usb
AgeCommit message (Collapse)AuthorFilesLines
2022-07-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-7/+7
include/net/sock.h 310731e2f161 ("net: Fix data-races around sysctl_mem.") e70f3c701276 ("Revert "net: set SK_MEM_QUANTUM to 4096"") https://lore.kernel.org/all/20220711120211.7c8b7cba@canb.auug.org.au/ net/ipv4/fib_semantics.c 747c14307214 ("ip: fix dflt addr selection for connected nexthop") d62607c3fe45 ("net: rename reference+tracking helpers") net/tls/tls.h include/net/tls.h 3d8c51b25a23 ("net/tls: Check for errors in tls_device_init") 587903142308 ("tls: create an internal header") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-13r8152: fix accessing unset transport headerHayes Wang1-7/+7
A warning is triggered by commit 66e4c8d95008 ("net: warn if transport header was not set"). The warning is harmless, because the value from skb_transport_offset() is only used for skb_is_gso() is true or the skb->ip_summed is equal to CHECKSUM_PARTIAL. Fixes: 66e4c8d95008 ("net: warn if transport header was not set") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-6/+13
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-07usbnet: fix memory leak in error caseOliver Neukum1-5/+12
usbnet_write_cmd_async() mixed up which buffers need to be freed in which error case. v2: add Fixes tag v3: fix uninitialized buf pointer Fixes: 877bd862f32b8 ("usbnet: introduce usbnet 3 command helpers") Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220705125351.17309-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-06net: asix: change the type of asix_set_sw/hw_mii to staticZhengchao Shao2-22/+21
The functions of asix_set_sw/hw_mii are not called in other files, so change them to static. Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20220704123448.128980-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-04usbnet: smsc95xx: Clean up unnecessary BUG_ON() upon register accessLukas Wunner1-4/+0
smsc95xx_read_reg() and smsc95xx_write_reg() call BUG_ON() if the struct usbnet pointer passed in is NULL. The functions have just been amended to dereference the pointer on entry. So the kernel now oopses if the pointer is NULL, eliminating the need for an explicit BUG_ON(). Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04usbnet: smsc95xx: Clean up nopm handlingLukas Wunner1-106/+66
The LAN95xx driver has just been amended to auto-detect whether the _nopm variant of usbnet_read_cmd() / usbnet_write_cmd() shall be used. Drop all the now unnecessary open coding of that distinction. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04usbnet: smsc95xx: Fix deadlock on runtime resumeLukas Wunner1-6/+20
Commit 05b35e7eb9a1 ("smsc95xx: add phylib support") amended smsc95xx_resume() to call phy_init_hw(). That function waits for the device to runtime resume even though it is placed in the runtime resume path, causing a deadlock. The problem is that phy_init_hw() calls down to smsc95xx_mdiobus_read(), which never uses the _nopm variant of usbnet_read_cmd(). Commit b4df480f68ae ("usbnet: smsc95xx: add reset_resume function with reset operation") causes a similar deadlock on resume if the device was already runtime suspended when entering system sleep: That's because the commit introduced smsc95xx_reset_resume(), which calls down to smsc95xx_reset(), which neglects to use _nopm accessors. Fix by auto-detecting whether a device access is performed by the suspend/resume task_struct and use the _nopm variant if so. This works because the PM core guarantees that suspend/resume callbacks are run in task context. Stacktrace for posterity: INFO: task kworker/2:1:49 blocked for more than 122 seconds. Workqueue: usb_hub_wq hub_event schedule rpm_resume __pm_runtime_resume usb_autopm_get_interface usbnet_read_cmd __smsc95xx_read_reg __smsc95xx_phy_wait_not_busy __smsc95xx_mdio_read smsc95xx_mdiobus_read __mdiobus_read mdiobus_read smsc_phy_reset phy_init_hw smsc95xx_resume usb_resume_interface usb_resume_both usb_runtime_resume __rpm_callback rpm_callback rpm_resume __pm_runtime_resume usb_autoresume_device hub_event process_one_work Fixes: b4df480f68ae ("usbnet: smsc95xx: add reset_resume function with reset operation") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v3.16+ Cc: Andre Edich <andre.edich@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-03net: usb: Remove unnecessary '0' values from hasdataLi kunyu1-1/+1
hasdata does not need to be initialized to zero. It will be assigned a value in the following judgment conditions. Signed-off-by: Li kunyu <kunyu@nfschina.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02usbnet: remove vestiges of debug macrosOliver Neukum1-3/+0
The driver has long since be converted to dynamic debugging. The internal compile options for more debugging can simply be deleted. Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220630110741.21314-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-01net: usb: Fix typo in codeLi kunyu1-1/+1
Remove the repeated ';' from code. Signed-off-by: Li kunyu <kunyu@nfschina.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01cdc-eem: always use BITOliver Neukum1-1/+1
Either you use BIT(x) or 1 << x in the same expression. Mixing them is ridiculous. Go to BIT() Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski4-29/+80
drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.c 9c5de246c1db ("net: sparx5: mdb add/del handle non-sparx5 devices") fbb89d02e33a ("net: sparx5: Allow mdb entries to both CPU and ports") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-30net: usb: ax88179_178a: Fix packet receivingJose Alonso1-25/+76
This patch corrects packet receiving in ax88179_rx_fixup. - problem observed: ifconfig shows allways a lot of 'RX Errors' while packets are received normally. This occurs because ax88179_rx_fixup does not recognise properly the usb urb received. The packets are normally processed and at the end, the code exits with 'return 0', generating RX Errors. (pkt_cnt==-2 and ptk_hdr over field rx_hdr trying to identify another packet there) This is a usb urb received by "tcpdump -i usbmon2 -X" on a little-endian CPU: 0x0000: eeee f8e3 3b19 87a0 94de 80e3 daac 0800 ^ packet 1 start (pkt_len = 0x05ec) ^^^^ IP alignment pseudo header ^ ethernet packet start last byte ethernet packet v padding (8-bytes aligned) vvvv vvvv 0x05e0: c92d d444 1420 8a69 83dd 272f e82b 9811 0x05f0: eeee f8e3 3b19 87a0 94de 80e3 daac 0800 ... ^ packet 2 0x0be0: eeee f8e3 3b19 87a0 94de 80e3 daac 0800 ... 0x1130: 9d41 9171 8a38 0ec5 eeee f8e3 3b19 87a0 ... 0x1720: 8cfc 15ff 5e4c e85c eeee f8e3 3b19 87a0 ... 0x1d10: ecfa 2a3a 19ab c78c eeee f8e3 3b19 87a0 ... 0x2070: eeee f8e3 3b19 87a0 94de 80e3 daac 0800 ... ^ packet 7 0x2120: 7c88 4ca5 5c57 7dcc 0d34 7577 f778 7e0a 0x2130: f032 e093 7489 0740 3008 ec05 0000 0080 ====1==== ====2==== hdr_off ^ pkt_len = 0x05ec ^^^^ AX_RXHDR_*=0x00830 ^^^^ ^ pkt_len = 0 ^^^^ AX_RXHDR_DROP_ERR=0x80000000 ^^^^ ^ 0x2140: 3008 ec05 0000 0080 3008 5805 0000 0080 0x2150: 3008 ec05 0000 0080 3008 ec05 0000 0080 0x2160: 3008 5803 0000 0080 3008 c800 0000 0080 ===11==== ===12==== ===13==== ===14==== 0x2170: 0000 0000 0e00 3821 ^^^^ ^^^^ rx_hdr ^^^^ pkt_cnt=14 ^^^^ hdr_off=0x2138 ^^^^ ^^^^ padding The dump shows that pkt_cnt is the number of entrys in the per-packet metadata. It is "2 * packet count". Each packet have two entrys. The first have a valid value (pkt_len and AX_RXHDR_*) and the second have a dummy-header 0x80000000 (pkt_len=0 with AX_RXHDR_DROP_ERR). Why exists dummy-header for each packet?!? My guess is that this was done probably to align the entry for each packet to 64-bits and maintain compatibility with old firmware. There is also a padding (0x00000000) before the rx_hdr to align the end of rx_hdr to 64-bit. Note that packets have a alignment of 64-bits (8-bytes). This patch assumes that the dummy-header and the last padding are optional. So it preserves semantics and recognises the same valid packets as the current code. This patch was made using only the dumpfile information and tested with only one device: 0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet Fixes: 57bc3d3ae8c1 ("net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup") Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by: Jose Alonso <joalonsof@gmail.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/d6970bb04bf67598af4d316eaeb1792040b18cfd.camel@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-30usbnet: fix memory allocation in helpersOliver Neukum1-2/+2
usbnet provides some helper functions that are also used in the context of reset() operations. During a reset the other drivers on a device are unable to operate. As that can be block drivers, a driver for another interface cannot use paging in its memory allocations without risking a deadlock. Use GFP_NOIO in the helpers. Fixes: 877bd862f32b8 ("usbnet: introduce usbnet 3 command helpers") Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220628093517.7469-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28net: usb: asix: do not force pause frames supportOleksij Rempel1-2/+1
We should respect link partner capabilities and not force flow control support on every link. Even more, in current state the MAC driver do not advertises pause support so we should not keep flow control enabled at all. Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support") Reported-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Tested-by: Anton Lundin <glance@acc.umu.se> Link: https://lore.kernel.org/r/20220624075139.3139300-2-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28net: asix: fix "can't send until first packet is send" issueOleksij Rempel1-0/+1
If cable is attached after probe sequence, the usbnet framework would not automatically start processing RX packets except at least one packet was transmitted. On systems with any kind of address auto configuration this issue was not detected, because some packets are send immediately after link state is changed to "running". With this patch we will notify usbnet about link status change provided by the PHYlib. Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support") Reported-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Tested-by: Anton Lundin <glance@acc.umu.se> Link: https://lore.kernel.org/r/20220624075139.3139300-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-25usbnet: Fix linkwatch use-after-free on disconnectLukas Wunner1-6/+2
usbnet uses the work usbnet_deferred_kevent() to perform tasks which may sleep. On disconnect, completion of the work was originally awaited in ->ndo_stop(). But in 2003, that was moved to ->disconnect() by historic commit "[PATCH] USB: usbnet, prevent exotic rtnl deadlock": https://git.kernel.org/tglx/history/c/0f138bbfd83c The change was made because back then, the kernel's workqueue implementation did not allow waiting for a single work. One had to wait for completion of *all* work by calling flush_scheduled_work(), and that could deadlock when waiting for usbnet_deferred_kevent() with rtnl_mutex held in ->ndo_stop(). The commit solved one problem but created another: It causes a use-after-free in USB Ethernet drivers aqc111.c, asix_devices.c, ax88179_178a.c, ch9200.c and smsc75xx.c: * If the drivers receive a link change interrupt immediately before disconnect, they raise EVENT_LINK_RESET in their (non-sleepable) ->status() callback and schedule usbnet_deferred_kevent(). * usbnet_deferred_kevent() invokes the driver's ->link_reset() callback, which calls netif_carrier_{on,off}(). * That in turn schedules the work linkwatch_event(). Because usbnet_deferred_kevent() is awaited after unregister_netdev(), netif_carrier_{on,off}() may operate on an unregistered netdev and linkwatch_event() may run after free_netdev(), causing a use-after-free. In 2010, usbnet was changed to only wait for a single instance of usbnet_deferred_kevent() instead of *all* work by commit 23f333a2bfaf ("drivers/net: don't use flush_scheduled_work()"). Unfortunately the commit neglected to move the wait back to ->ndo_stop(). Rectify that omission at long last. Reported-by: Jann Horn <jannh@google.com> Link: https://lore.kernel.org/netdev/CAG48ez0MHBbENX5gCdHAUXZ7h7s20LnepBF-pa5M=7Bi-jZrEA@mail.gmail.com/ Reported-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/netdev/20220315113841.GA22337@pengutronix.de/ Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/d1c87ebe9fc502bffcd1576e238d685ad08321e4.1655987888.git.lukas@wunner.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-13/+13
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-15net: usb: ax88179_178a needs FLAG_SEND_ZLPJose Alonso1-13/+13
The extra byte inserted by usbnet.c when (length % dev->maxpacket == 0) is causing problems to device. This patch sets FLAG_SEND_ZLP to avoid this. Tested with: 0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet Problems observed: ====================================================================== 1) Using ssh/sshfs. The remote sshd daemon can abort with the message: "message authentication code incorrect" This happens because the tcp message sent is corrupted during the USB "Bulk out". The device calculate the tcp checksum and send a valid tcp message to the remote sshd. Then the encryption detects the error and aborts. 2) NETDEV WATCHDOG: ... (ax88179_178a): transmit queue 0 timed out 3) Stop normal work without any log message. The "Bulk in" continue receiving packets normally. The host sends "Bulk out" and the device responds with -ECONNRESET. (The netusb.c code tx_complete ignore -ECONNRESET) Under normal conditions these errors take days to happen and in intense usage take hours. A test with ping gives packet loss, showing that something is wrong: ping -4 -s 462 {destination} # 462 = 512 - 42 - 8 Not all packets fail. My guess is that the device tries to find another packet starting at the extra byte and will fail or not depending on the next bytes (old buffer content). ====================================================================== Signed-off-by: Jose Alonso <joalonsof@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: smsc95xx: add support for Microchip EVB-LAN8670-USBParthiban Veerasooran1-0/+5
This patch adds support for Microchip's EVB-LAN8670-USB 10BASE-T1S ethernet device to the existing smsc95xx driver by adding the new USB VID/PID pairs. Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-10net: adopt u64_stats_t in struct pcpu_sw_netstatsEric Dumazet1-4/+4
As explained in commit 316580b69d0a ("u64_stats: provide u64_stats_t type") we should use u64_stats_t and related accessors to avoid load/store tearing. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-03Merge tag 'usb-5.19-rc1' of ↵Linus Torvalds4-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt driver changes for 5.18-rc1. For the most part it's been a quiet development cycle for the USB core, but there are the usual "hot spots" of development activity. Included in here are: - Thunderbolt driver updates: - fixes for devices without displayport adapters - lane bonding support and improvements - other minor changes based on device testing - dwc3 gadget driver changes. It seems this driver will never be finished given that the IP core is showing up in zillions of new devices and each implementation decides to do something different with it... - uvc gadget driver updates as more devices start to use and rely on this hardware as well - usb_maxpacket() api changes to remove an unneeded and unused parameter. - usb-serial driver device id updates and small cleanups - typec cleanups and fixes based on device testing - device tree updates for usb properties - lots of other small fixes and driver updates. All of these have been in linux-next for weeks with no reported problems" * tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) USB: new quirk for Dell Gen 2 devices usb: dwc3: core: Add error log when core soft reset failed usb: dwc3: gadget: Move null pinter check to proper place usb: hub: Simplify error and success path in port_over_current_notify usb: cdns3: allocate TX FIFO size according to composite EP number usb: dwc3: Fix ep0 handling when getting reset while doing control transfer usb: Probe EHCI, OHCI controllers asynchronously usb: isp1760: Fix out-of-bounds array access xhci: Don't defer primary roothub registration if there is only one roothub USB: serial: option: add Quectel BG95 modem USB: serial: pl2303: fix type detection for odd device xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI xhci: Remove quirk for over 10 year old evaluation hardware xhci: prevent U2 link power state if Intel tier policy prevented U1 xhci: use generic command timer for stop endpoint commands. usb: host: xhci-plat: omit shared hcd if either root hub has no ports usb: host: xhci-plat: prepare operation w/o shared hcd usb: host: xhci-plat: create shared hcd after having added main hcd xhci: prepare for operation w/o shared hcd xhci: factor out parts of xhci_gen_setup() ...
2022-06-02net: usb: qmi_wwan: Add support for Cinterion MV31 with new baselineSlark Xiao1-0/+1
Adding support for Cinterion device MV31 with Qualcomm new baseline. Use different PIDs to separate it from previous base line products. All interfaces settings keep same as previous. T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00b9 Rev=04.14 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00B9 USB Mobile Broadband S: SerialNumber=90418e79 C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Signed-off-by: Slark Xiao <slark_xiao@163.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20220601040531.6016-1-slark_xiao@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-27net: usb: qmi_wwan: add Telit 0x1250 compositionCarlo Lobrano1-0/+1
Add support for Telit LN910Cx 0x1250 composition 0x1250: rmnet, tty, tty, tty, tty Signed-off-by: Carlo Lobrano <c.lobrano@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-20net: usb: r8152: Add in new Devices that are supported for Mac-PassthruDavid Ober1-7/+26
Lenovo Thunderbolt 4 Dock, and other Lenovo USB Docks are using the original Realtek USB ethernet Vendor and Product IDs If the Network device is Realtek verify that it is on a Lenovo USB hub before enabling the passthru feature This also adds in the device IDs for the Lenovo USB Dongle and one other USB-C dock V2 fix formating of code V3 remove Generic define for Device ID 0x8153 and change it to use value V4 rearrange defines and case statement to put them in better order v5 create helper function to do the testing work as suggested Signed-off-by: David Ober <dober6023@gmail.com> Link: https://lore.kernel.org/r/20220517180539.25839-1-dober6023@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-13usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid pollingLukas Wunner1-52/+61
Link status of SMSC LAN95xx chips is polled once per second, even though they're capable of signaling PHY interrupts through the MAC layer. Forward those interrupts to the PHY driver to avoid polling. Benefits are reduced bus traffic, reduced CPU overhead and quicker interface bringup. Polling was introduced in 2016 by commit d69d16949346 ("usbnet: smsc95xx: fix link detection for disabled autonegotiation"). Back then, the LAN95xx driver neglected to enable the ENERGYON interrupt, hence couldn't detect link-up events when auto-negotiation was disabled. The proper solution would have been to enable the ENERGYON interrupt instead of polling. Since then, PHY handling was moved from the LAN95xx driver to the SMSC PHY driver with commit 05b35e7eb9a1 ("smsc95xx: add phylib support"). That PHY driver is capable of link detection with auto-negotiation disabled because it enables the ENERGYON interrupt. Note that signaling interrupts through the MAC layer not only works with the integrated PHY, but also with an external PHY, provided its interrupt pin is attached to LAN95xx's nPHY_INT pin. In the unlikely event that the interrupt pin of an external PHY is attached to a GPIO of the SoC (or not connected at all), the driver can be amended to retrieve the irq from the PHY's of_node. To forward PHY interrupts to phylib, it is not sufficient to call phy_mac_interrupt(). Instead, the PHY's interrupt handler needs to run so that PHY interrupts are cleared. That's because according to page 119 of the LAN950x datasheet, "The source of this interrupt is a level. The interrupt persists until it is cleared in the PHY." https://www.microchip.com/content/dam/mchp/documents/UNG/ProductDocuments/DataSheets/LAN950x-Data-Sheet-DS00001875D.pdf Therefore, create an IRQ domain with a single IRQ for the PHY. In the future, the IRQ domain may be extended to support the 11 GPIOs on the LAN95xx. Normally the PHY interrupt should be masked until the PHY driver has cleared it. However masking requires a (sleeping) USB transaction and interrupts are received in (non-sleepable) softirq context. I decided not to mask the interrupt at all (by using the dummy_irq_chip's noop ->irq_mask() callback): The USB interrupt endpoint is polled in 1 msec intervals and normally that's sufficient to wake the PHY driver's IRQ thread and have it clear the interrupt. If it does take longer, worst thing that can happen is the IRQ thread is woken again. No big deal. Because PHY interrupts are now perpetually enabled, there's no need to selectively enable them on suspend. So remove all invocations of smsc95xx_enable_phy_wakeup_interrupts(). In smsc95xx_resume(), move the call of phy_init_hw() before usbnet_resume() (which restarts the status URB) to ensure that the PHY is fully initialized when an interrupt is handled. Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500 Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514 Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> # from a PHY perspective Cc: Andre Edich <andre.edich@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13usbnet: smsc95xx: Avoid link settings race on interrupt receptionLukas Wunner1-7/+9
When a PHY interrupt is signaled, the SMSC LAN95xx driver updates the MAC full duplex mode and PHY flow control registers based on cached data in struct phy_device: smsc95xx_status() # raises EVENT_LINK_RESET usbnet_deferred_kevent() smsc95xx_link_reset() # uses cached data in phydev Simultaneously, phylib polls link status once per second and updates that cached data: phy_state_machine() phy_check_link_status() phy_read_status() lan87xx_read_status() genphy_read_status() # updates cached data in phydev If smsc95xx_link_reset() wins the race against genphy_read_status(), the registers may be updated based on stale data. E.g. if the link was previously down, phydev->duplex is set to DUPLEX_UNKNOWN and that's what smsc95xx_link_reset() will use, even though genphy_read_status() may update it to DUPLEX_FULL afterwards. PHY interrupts are currently only enabled on suspend to trigger wakeup, so the impact of the race is limited, but we're about to enable them perpetually. Avoid the race by delaying execution of smsc95xx_link_reset() until phy_state_machine() has done its job and calls back via smsc95xx_handle_link_change(). Signaling EVENT_LINK_RESET on wakeup is not necessary because phylib picks up link status changes through polling. So drop the declaration of a ->link_reset() callback. Note that the semicolon on a line by itself added in smsc95xx_status() is a placeholder for a function call which will be added in a subsequent commit. That function call will actually handle the INT_ENP_PHY_INT_ interrupt. Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500 Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514 Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13usbnet: smsc95xx: Don't reset PHY behind PHY driver's backLukas Wunner1-18/+0
smsc95xx_reset() resets the PHY behind the PHY driver's back, which seems like a bad idea generally. Remove that portion of the function. We're about to use PHY interrupts instead of polling to detect link changes on SMSC LAN95xx chips. Because smsc95xx_reset() is called from usbnet_open(), PHY interrupt settings are lost whenever the net_device is brought up. There are two other callers of smsc95xx_reset(), namely smsc95xx_bind() and smsc95xx_reset_resume(), and both may indeed benefit from a PHY reset. However they already perform one through their calls to phy_connect_direct() and phy_init_hw(). Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500 Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514 Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: Martyn Welch <martyn.welch@collabora.com> Cc: Gabriel Hojda <ghojda@yo2urs.ro> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13usbnet: smsc95xx: Don't clear read-only PHY interruptLukas Wunner1-4/+0
Upon receiving data from the Interrupt Endpoint, the SMSC LAN95xx driver attempts to clear the signaled interrupts by writing "all ones" to the Interrupt Status Register. However the driver only ever enables a single type of interrupt, namely the PHY Interrupt. And according to page 119 of the LAN950x datasheet, its bit in the Interrupt Status Register is read-only. There's no other way to clear it than in a separate PHY register: https://www.microchip.com/content/dam/mchp/documents/UNG/ProductDocuments/DataSheets/LAN950x-Data-Sheet-DS00001875D.pdf Consequently, writing "all ones" to the Interrupt Status Register is pointless and can be dropped. Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500 Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514 Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13usbnet: Run unregister_netdev() before unbind() againLukas Wunner3-10/+5
Commit 2c9d6c2b871d ("usbnet: run unbind() before unregister_netdev()") sought to fix a use-after-free on disconnect of USB Ethernet adapters. It turns out that a different fix is necessary to address the issue: https://lore.kernel.org/netdev/18b3541e5372bc9b9fc733d422f4e698c089077c.1650177997.git.lukas@wunner.de/ So the commit was not necessary. The commit made binding and unbinding of USB Ethernet asymmetrical: Before, usbnet_probe() first invoked the ->bind() callback and then register_netdev(). usbnet_disconnect() mirrored that by first invoking unregister_netdev() and then ->unbind(). Since the commit, the order in usbnet_disconnect() is reversed and no longer mirrors usbnet_probe(). One consequence is that a PHY disconnected (and stopped) in ->unbind() is afterwards stopped once more by unregister_netdev() as it closes the netdev before unregistering. That necessitates a contortion in ->stop() because the PHY may only be stopped if it hasn't already been disconnected. Reverting the commit allows making the call to phy_stop() unconditional in ->stop(). Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500 Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514 Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Oliver Neukum <oneukum@suse.com> Cc: Martyn Welch <martyn.welch@collabora.com> Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-08r8152: switch to netif_napi_add_weight()Jakub Kicinski1-4/+2
r8152 uses a custom napi weight, switch to the new API for setting custom weight. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-06net: make drivers set the TSO limit not the GSO limitJakub Kicinski4-4/+4
Drivers should call the TSO setting helper, GSO is controllable by user space. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-03Merge 5.18-rc5 into usb-nextGreg Kroah-Hartman1-2/+7
We need the USB fixes in here, and this resolves a merge issue in drivers/usb/dwc3/drd.c Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-29usb: lan78xx: remove a copy of the NAPI_POLL_WEIGHT defineJakub Kicinski1-3/+1
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-26net: usb: qmi_wwan: add support for Sierra Wireless EM7590Ethan Yang1-0/+1
add support for Sierra Wireless EM7590 0xc081 composition. Signed-off-by: Ethan Yang <etyang@sierrawireless.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20220425054028.5444-1-etyang@sierrawireless.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-23net: remove third argument of usb_maxpacket()Vincent Mailhol4-7/+7
The third argument of usb_maxpacket(): in_out has been deprecated because it could be derived from the second argument (e.g. using usb_pipeout(pipe)). N.B. function usb_maxpacket() was made variadic to accommodate the transition from the old prototype with three arguments to the new one with only two arguments (so that no renaming is needed). The variadic argument is to be removed once all users of usb_maxpacket() get migrated. CC: Oliver Neukum <oliver@neukum.org> CC: David S. Miller <davem@davemloft.net> CC: Jakub Kicinski <kuba@kernel.org> CC: Woojung Huh <woojung.huh@microchip.com> CC: Felix Fietkau <nbd@nbd.name> CC: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> CC: Ryder Lee <ryder.lee@mediatek.com> CC: Kalle Valo <kvalo@kernel.org> CC: Matthias Brugger <matthias.bgg@gmail.com> CC: Stanislaw Gruszka <stf_xl@wp.pl> CC: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20220317035514.6378-6-mailhol.vincent@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22USB2NET : SR9800 : change SR9800_BULKIN_SIZE from global to staticTom Rix1-1/+1
Smatch reports this issue sr9800.h:166:53: warning: symbol 'SR9800_BULKIN_SIZE' was not declared. Should it be static? Global variables should not be defined in header files. This only works because sr9800.h in only included by sr9800.c Change the storage-class specifier to static. And since it does not change add type qualifier const. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22net: cdc-ncm: Move spin_lock_bh() to spin_lock()Yunbo Yu1-4/+4
It is unnecessary to call spin_lock_bh() for you are already in a tasklet. Signed-off-by: Yunbo Yu <yuyunbo519@gmail.com> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-14rndis_host: limit scope of bogus MAC address detection to ZTE devicesLech Perczak1-5/+12
Reporting of bogus MAC addresses and ignoring configuration of new destination address wasn't observed outside of a range of ZTE devices, among which this seems to be the common bug. Align rndis_host driver with implementation found in cdc_ether, which also limits this workaround to ZTE devices. Suggested-by: Bjørn Mork <bjorn@mork.no> Cc: Kristian Evensen <kristian.evensen@gmail.com> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-14rndis_host: enable the bogus MAC fixup for ZTE devices from cdc_etherLech Perczak1-0/+32
Certain ZTE modems, namely: MF823. MF831, MF910, built-in modem from MF286R, expose both CDC-ECM and RNDIS network interfaces. They have a trait of ignoring the locally-administered MAC address configured on the interface both in CDC-ECM and RNDIS part, and this leads to dropping of incoming traffic by the host. However, the workaround was only present in CDC-ECM, and MF286R explicitly requires it in RNDIS mode. Re-use the workaround in rndis_host as well, to fix operation of MF286R module, some versions of which expose only the RNDIS interface. Do so by introducing new flag, RNDIS_DRIVER_DATA_DST_MAC_FIXUP, and testing for it in rndis_rx_fixup. This is required, as RNDIS uses frame batching, and all of the packets inside the batch need the fixup. This might introduce a performance penalty, because test is done for every returned Ethernet frame. Apply the workaround to both "flavors" of RNDIS interfaces, as older ZTE modems, like MF823 found in the wild, report the USB_CLASS_COMM class interfaces, while MF286R reports USB_CLASS_WIRELESS_CONTROLLER. Suggested-by: Bjørn Mork <bjorn@mork.no> Cc: Kristian Evensen <kristian.evensen@gmail.com> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-14cdc_ether: export usbnet_cdc_zte_rx_fixupLech Perczak1-1/+2
Commit bfe9b9d2df66 ("cdc_ether: Improve ZTE MF823/831/910 handling") introduces a workaround for certain ZTE modems reporting invalid MAC addresses over CDC-ECM. The same issue was present on their RNDIS interface,which was fixed in commit a5a18bdf7453 ("rndis_host: Set valid random MAC on buggy devices"). However, internal modem of ZTE MF286R router, on its RNDIS interface, also exhibits a second issue fixed already in CDC-ECM, of the device not respecting configured random MAC address. In order to share the fixup for this with rndis_host driver, export the workaround function, which will be re-used in the following commit in rndis_host. Cc: Kristian Evensen <kristian.evensen@gmail.com> Cc: Bjørn Mork <bjorn@mork.no> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-12net: usb: qmi_wwan: add Telit 0x1057 compositionDaniele Palmas1-0/+1
Add the following Telit FN980 composition: 0x1057: tty, adb, rmnet, tty, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20220411135943.4067264-1-dnlplm@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+7
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-06net: usb: aqc111: Fix out-of-bounds accesses in RX fixupMarcin Kozlowski1-2/+7
aqc111_rx_fixup() contains several out-of-bounds accesses that can be triggered by a malicious (or defective) USB device, in particular: - The metadata array (desc_offset..desc_offset+2*pkt_count) can be out of bounds, causing OOB reads and (on big-endian systems) OOB endianness flips. - A packet can overlap the metadata array, causing a later OOB endianness flip to corrupt data used by a cloned SKB that has already been handed off into the network stack. - A packet SKB can be constructed whose tail is far beyond its end, causing out-of-bounds heap data to be considered part of the SKB's data. Found doing variant analysis. Tested it with another driver (ax88179_178a), since I don't have a aqc111 device to test it, but the code looks very similar. Signed-off-by: Marcin Kozlowski <marcinguy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-06net: usb: remove duplicate assignmentWang Qing1-1/+0
netdev_alloc_skb() has assigned ssi->netdev to skb->dev if successed, no need to repeat assignment. Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-25net: usb: ax88179_178a: add Allied Telesis AT-UMCsGreg Jesionowski1-0/+51
Adds the driver_info and IDs for the AX88179 based Allied Telesis AT-UMC family of devices. Signed-off-by: Greg Jesionowski <jesionowskigreg@gmail.com> Link: https://lore.kernel.org/r/20220323220024.GA36800@test-HP-EliteDesk-800-G1-SFF Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-24Merge tag 'net-next-5.18' of ↵Linus Torvalds8-107/+119
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "The sprinkling of SPI drivers is because we added a new one and Mark sent us a SPI driver interface conversion pull request. Core ---- - Introduce XDP multi-buffer support, allowing the use of XDP with jumbo frame MTUs and combination with Rx coalescing offloads (LRO). - Speed up netns dismantling (5x) and lower the memory cost a little. Remove unnecessary per-netns sockets. Scope some lists to a netns. Cut down RCU syncing. Use batch methods. Allow netdev registration to complete out of order. - Support distinguishing timestamp types (ingress vs egress) and maintaining them across packet scrubbing points (e.g. redirect). - Continue the work of annotating packet drop reasons throughout the stack. - Switch netdev error counters from an atomic to dynamically allocated per-CPU counters. - Rework a few preempt_disable(), local_irq_save() and busy waiting sections problematic on PREEMPT_RT. - Extend the ref_tracker to allow catching use-after-free bugs. BPF --- - Introduce "packing allocator" for BPF JIT images. JITed code is marked read only, and used to be allocated at page granularity. Custom allocator allows for more efficient memory use, lower iTLB pressure and prevents identity mapping huge pages from getting split. - Make use of BTF type annotations (e.g. __user, __percpu) to enforce the correct probe read access method, add appropriate helpers. - Convert the BPF preload to use light skeleton and drop the user-mode-driver dependency. - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling its use as a packet generator. - Allow local storage memory to be allocated with GFP_KERNEL if called from a hook allowed to sleep. - Introduce fprobe (multi kprobe) to speed up mass attachment (arch bits to come later). - Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra. - Allow cgroup BPF progs to return custom errors to user space. - Add support for AF_UNIX iterator batching. - Allow iterator programs to use sleepable helpers. - Support JIT of add, and, or, xor and xchg atomic ops on arm64. - Add BTFGen support to bpftool which allows to use CO-RE in kernels without BTF info. - Large number of libbpf API improvements, cleanups and deprecations. Protocols --------- - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev. - Adjust TSO packet sizes based on min_rtt, allowing very low latency links (data centers) to always send full-sized TSO super-frames. - Make IPv6 flow label changes (AKA hash rethink) more configurable, via sysctl and setsockopt. Distinguish between server and client behavior. - VxLAN support to "collect metadata" devices to terminate only configured VNIs. This is similar to VLAN filtering in the bridge. - Support inserting IPv6 IOAM information to a fraction of frames. - Add protocol attribute to IP addresses to allow identifying where given address comes from (kernel-generated, DHCP etc.) - Support setting socket and IPv6 options via cmsg on ping6 sockets. - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS. Define dscp_t and stop taking ECN bits into account in fib-rules. - Add support for locked bridge ports (for 802.1X). - tun: support NAPI for packets received from batched XDP buffs, doubling the performance in some scenarios. - IPv6 extension header handling in Open vSwitch. - Support IPv6 control message load balancing in bonding, prevent neighbor solicitation and advertisement from using the wrong port. Support NS/NA monitor selection similar to existing ARP monitor. - SMC - improve performance with TCP_CORK and sendfile() - support auto-corking - support TCP_NODELAY - MCTP (Management Component Transport Protocol) - add user space tag control interface - I2C binding driver (as specified by DMTF DSP0237) - Multi-BSSID beacon handling in AP mode for WiFi. - Bluetooth: - handle MSFT Monitor Device Event - add MGMT Adv Monitor Device Found/Lost events - Multi-Path TCP: - add support for the SO_SNDTIMEO socket option - lots of selftest cleanups and improvements - Increase the max PDU size in CAN ISOTP to 64 kB. Driver API ---------- - Add HW counters for SW netdevs, a mechanism for devices which offload packet forwarding to report packet statistics back to software interfaces such as tunnels. - Select the default NIC queue count as a fraction of number of physical CPU cores, instead of hard-coding to 8. - Expose devlink instance locks to drivers. Allow device layer of drivers to use that lock directly instead of creating their own which always runs into ordering issues in devlink callbacks. - Add header/data split indication to guide user space enabling of TCP zero-copy Rx. - Allow configuring completion queue event size. - Refactor page_pool to enable fragmenting after allocation. - Add allocation and page reuse statistics to page_pool. - Improve Multiple Spanning Trees support in the bridge to allow reuse of topologies across VLANs, saving HW resources in switches. - DSA (Distributed Switch Architecture): - replay and offload of host VLAN entries - offload of static and local FDB entries on LAG interfaces - FDB isolation and unicast filtering New hardware / drivers ---------------------- - Ethernet: - LAN937x T1 PHYs - Davicom DM9051 SPI NIC driver - Realtek RTL8367S, RTL8367RB-VB switch and MDIO - Microchip ksz8563 switches - Netronome NFP3800 SmartNICs - Fungible SmartNICs - MediaTek MT8195 switches - WiFi: - mt76: MediaTek mt7916 - mt76: MediaTek mt7921u USB adapters - brcmfmac: Broadcom BCM43454/6 - Mobile: - iosm: Intel M.2 7360 WWAN card Drivers ------- - Convert many drivers to the new phylink API built for split PCS designs but also simplifying other cases. - Intel Ethernet NICs: - add TTY for GNSS module for E810T device - improve AF_XDP performance - GTP-C and GTP-U filter offload - QinQ VLAN support - Mellanox Ethernet NICs (mlx5): - support xdp->data_meta - multi-buffer XDP - offload tc push_eth and pop_eth actions - Netronome Ethernet NICs (nfp): - flow-independent tc action hardware offload (police / meter) - AF_XDP - Other Ethernet NICs: - at803x: fiber and SFP support - xgmac: mdio: preamble suppression and custom MDC frequencies - r8169: enable ASPM L1.2 if system vendor flags it as safe - macb/gem: ZynqMP SGMII - hns3: add TX push mode - dpaa2-eth: software TSO - lan743x: multi-queue, mdio, SGMII, PTP - axienet: NAPI and GRO support - Mellanox Ethernet switches (mlxsw): - source and dest IP address rewrites - RJ45 ports - Marvell Ethernet switches (prestera): - basic routing offload - multi-chain TC ACL offload - NXP embedded Ethernet switches (ocelot & felix): - PTP over UDP with the ocelot-8021q DSA tagging protocol - basic QoS classification on Felix DSA switch using dcbnl - port mirroring for ocelot switches - Microchip high-speed industrial Ethernet (sparx5): - offloading of bridge port flooding flags - PTP Hardware Clock - Other embedded switches: - lan966x: PTP Hardward Clock - qca8k: mdio read/write operations via crafted Ethernet packets - Qualcomm 802.11ax WiFi (ath11k): - add LDPC FEC type and 802.11ax High Efficiency data in radiotap - enable RX PPDU stats in monitor co-exist mode - Intel WiFi (iwlwifi): - UHB TAS enablement via BIOS - band disablement via BIOS - channel switch offload - 32 Rx AMPDU sessions in newer devices - MediaTek WiFi (mt76): - background radar detection - thermal management improvements on mt7915 - SAR support for more mt76 platforms - MBSSID and 6 GHz band on mt7915 - RealTek WiFi: - rtw89: AP mode - rtw89: 160 MHz channels and 6 GHz band - rtw89: hardware scan - Bluetooth: - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS) - Microchip CAN (mcp251xfd): - multiple RX-FIFOs and runtime configurable RX/TX rings - internal PLL, runtime PM handling simplification - improve chip detection and error handling after wakeup" * tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits) llc: fix netdevice reference leaks in llc_ui_bind() drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool ice: don't allow to run ice_send_event_to_aux() in atomic ctx ice: fix 'scheduling while atomic' on aux critical err interrupt net/sched: fix incorrect vlan_push_eth dest field net: bridge: mst: Restrict info size queries to bridge ports net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init() drivers: net: xgene: Fix regression in CRC stripping net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT net: dsa: fix missing host-filtered multicast addresses net/mlx5e: Fix build warning, detected write beyond size of field iwlwifi: mvm: Don't fail if PPAG isn't supported selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" netdevice: add missing dm_private kdoc net: bridge: mst: prevent NULL deref in br_mst_info_size() selftests: forwarding: Use same VRF for port and VLAN upper ...
2022-03-14Merge tag 'v5.17-rc8' into irq/core, to fix conflictsIngo Molnar2-9/+21
Conflicts: drivers/pinctrl/pinctrl-starfive.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2022-03-12net: usb: asix: suspend embedded PHY if external is usedOleksij Rempel2-1/+20
In case external PHY is used, we need to take care of embedded PHY. Since there are no methods to disable this PHY from the MAC side and keeping RMII reference clock, we need to suspend it. This patch will reduce electrical noise (PHY is continuing to send FLPs) and power consumption by 0,22W. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-17 22:47:58 +0300