summaryrefslogtreecommitdiff
path: root/drivers/net/usb
AgeCommit message (Collapse)AuthorFilesLines
2023-06-09net: usb: qmi_wwan: add support for Compal RXM-G1Wes Huang1-0/+2
Add support for Compal RXM-G1 which is based on Qualcomm SDX55 chip. This patch adds support for two compositions: 0x9091: DIAG + MODEM + QMI_RMNET + ADB 0x90db: DIAG + DUN + RMNET + DPL + QDSS(Trace) + ADB T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=05c6 ProdID=9091 Rev= 4.14 S: Manufacturer=QCOM S: Product=SDXPRAIRIE-MTP _SN:719AB680 S: SerialNumber=719ab680 C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=84(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=05c6 ProdID=90db Rev= 4.14 S: Manufacturer=QCOM S: Product=SDXPRAIRIE-MTP _SN:719AB680 S: SerialNumber=719ab680 C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=84(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=8f(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Wes Huang <wes.huang@moxa.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20230608030141.3546-1-wes.huang@moxa.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30net: usb: qmi_wwan: Set DTR quirk for BroadMobi BM818Sebastian Krzyszkowiak1-1/+1
BM818 is based on Qualcomm MDM9607 chipset. Fixes: 9a07406b00cd ("net: usb: qmi_wwan: Add the BroadMobi BM818 card") Cc: stable@vger.kernel.org Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20230526-bm818-dtr-v1-1-64bbfa6ba8af@puri.sm Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-19net: cdc_ncm: Deal with too low values of dwNtbOutMaxSizeTudor Ambarus1-9/+15
Currently in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is lower than the calculated "min" value, but greater than zero, the logic sets tx_max to dwNtbOutMaxSize. This is then used to allocate a new SKB in cdc_ncm_fill_tx_frame() where all the data is handled. For small values of dwNtbOutMaxSize the memory allocated during alloc_skb(dwNtbOutMaxSize, GFP_ATOMIC) will have the same size, due to how size is aligned at alloc time: size = SKB_DATA_ALIGN(size); size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); Thus we hit the same bug that we tried to squash with commit 2be6d4d16a084 ("net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero") Low values of dwNtbOutMaxSize do not cause an issue presently because at alloc_skb() time more memory (512b) is allocated than required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b). However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b). Consequently the SKB bounds checking semantics fails and panics: skbuff: skb_over_panic: text:ffffffff831f755b len:184 put:172 head:ffff88811f1c6c00 data:ffff88811f1c6c00 tail:0xb8 end:0x80 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:113! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 57 Comm: kworker/0:2 Not tainted 5.15.106-syzkaller-00249-g19c0ed55a470 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 Workqueue: mld mld_ifc_work RIP: 0010:skb_panic net/core/skbuff.c:113 [inline] RIP: 0010:skb_over_panic+0x14c/0x150 net/core/skbuff.c:118 [snip] Call Trace: <TASK> skb_put+0x151/0x210 net/core/skbuff.c:2047 skb_put_zero include/linux/skbuff.h:2422 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1131 [inline] cdc_ncm_fill_tx_frame+0x11ab/0x3da0 drivers/net/usb/cdc_ncm.c:1308 cdc_ncm_tx_fixup+0xa3/0x100 Deal with too low values of dwNtbOutMaxSize, clamp it in the range [USB_CDC_NCM_NTB_MIN_OUT_SIZE, CDC_NCM_NTB_MAX_SIZE_TX]. We ensure enough data space is allocated to handle CDC data by making sure dwNtbOutMaxSize is not smaller than USB_CDC_NCM_NTB_MIN_OUT_SIZE. Fixes: 289507d3364f ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning") Cc: stable@vger.kernel.org Reported-by: syzbot+9f575a1f15fc0c01ed69@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=b982f1059506db48409d Link: https://lore.kernel.org/all/20211202143437.1411410-1-lee.jones@linaro.org/ Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230517133808.1873695-2-tudor.ambarus@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-03r8152: fix the autosuspend doesn't workHayes Wang1-0/+1
Set supports_autosuspend = 1 for the rtl8152_cfgselector_driver. Fixes: ec51fbd1b8a2 ("r8152: add USB device driver for config selection") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-01r8152: move setting r8153b_rx_agg_chg_indicate()Hayes Wang1-6/+8
Move setting r8153b_rx_agg_chg_indicate() for 2.5G devices. The r8153b_rx_agg_chg_indicate() has to be called after enabling tx/rx. Otherwise, the coalescing settings are useless. Fixes: 195aae321c82 ("r8152: support new chips") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-01r8152: fix the poor throughput for 2.5G devicesHayes Wang1-0/+14
Fix the poor throughput for 2.5G devices, when changing the speed from auto mode to force mode. This patch is used to notify the MAC when the mode is changed. Fixes: 195aae321c82 ("r8152: support new chips") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-01r8152: fix flow control issue of RTL8156AHayes Wang1-20/+36
The feature of flow control becomes abnormal, if the device sends a pause frame and the tx/rx is disabled before sending a release frame. It causes the lost of packets. Set PLA_RX_FIFO_FULL and PLA_RX_FIFO_EMPTY to zeros before disabling the tx/rx. And, toggle FC_PATCH_TASK before enabling tx/rx to reset the flow control patch and timer. Then, the hardware could clear the state and the flow control becomes normal after enabling tx/rx. Besides, remove inline for fc_pause_on_auto() and fc_pause_off_auto(). Fixes: 195aae321c82 ("r8152: support new chips") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-08r8152: Add __GFP_NOWARN to big allocationsDouglas Anderson1-1/+1
When memory is a little tight on my system, it's pretty easy to see warnings that look like this. ksoftirqd/0: page allocation failure: order:3, mode:0x40a20(GFP_ATOMIC|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0 ... Call trace: dump_backtrace+0x0/0x1e8 show_stack+0x20/0x2c dump_stack_lvl+0x60/0x78 dump_stack+0x18/0x38 warn_alloc+0x104/0x174 __alloc_pages+0x588/0x67c alloc_rx_agg+0xa0/0x190 [r8152 ...] r8152_poll+0x270/0x760 [r8152 ...] __napi_poll+0x44/0x1ec net_rx_action+0x100/0x300 __do_softirq+0xec/0x38c run_ksoftirqd+0x38/0xec smpboot_thread_fn+0xb8/0x248 kthread+0x134/0x154 ret_from_fork+0x10/0x20 On a fragmented system it's normal that order 3 allocations will sometimes fail, especially atomic ones. The driver handles these failures fine and the WARN just creates spam in the logs for this case. The __GFP_NOWARN flag is exactly for this situation, so add it to the allocation. NOTE: my testing is on a 5.15 system, but there should be no reason that this would be fundamentally different on a mainline kernel. Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Hayes Wang <hayeswang@realtek.com> Link: https://lore.kernel.org/r/20230406171411.1.I84dbef45786af440fd269b71e9436a96a8e7a152@changeid Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-23net: asix: fix modprobe "sysfs: cannot create duplicate filename"Grant Grundler1-5/+27
"modprobe asix ; rmmod asix ; modprobe asix" fails with: sysfs: cannot create duplicate filename \ '/devices/virtual/mdio_bus/usb-003:004' Issue was originally reported by Anton Lundin on 2022-06-22 (link below). Chrome OS team hit the same issue in Feb, 2023 when trying to find work arounds for other issues with AX88172 devices. The use of devm_mdiobus_register() with usbnet devices results in the MDIO data being associated with the USB device. When the asix driver is unloaded, the USB device continues to exist and the corresponding "mdiobus_unregister()" is NOT called until the USB device is unplugged or unauthorized. So the next "modprobe asix" will fail because the MDIO phy sysfs attributes still exist. The 'easy' (from a design PoV) fix is to use the non-devm variants of mdiobus_* functions and explicitly manage this use in the asix_bind and asix_unbind function calls. I've not explored trying to fix usbnet initialization so devm_* stuff will work. Fixes: e532a096be0e5 ("net: usb: asix: ax88772: add phylib support") Reported-by: Anton Lundin <glance@acc.umu.se> Link: https://lore.kernel.org/netdev/20220623063649.GD23685@pengutronix.de/T/ Tested-by: Eizan Miyamoto <eizan@chromium.org> Signed-off-by: Grant Grundler <grundler@chromium.org> Link: https://lore.kernel.org/r/20230321170539.732147-1-grundler@chromium.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-20usb: plusb: remove unused pl_clear_QuickLink_features functionTom Rix1-6/+0
clang with W=1 reports drivers/net/usb/plusb.c:65:1: error: unused function 'pl_clear_QuickLink_features' [-Werror,-Wunused-function] pl_clear_QuickLink_features(struct usbnet *dev, int val) ^ This static function is not used, so remove it. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-20net: usb: lan78xx: Limit packet length to skb->lenSzymon Heidrich1-1/+17
Packet length retrieved from descriptor may be larger than the actual socket buffer length. In such case the cloned skb passed up the network stack will leak kernel memory contents. Additionally prevent integer underflow when size is less than ETH_FCS_LEN. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-18net: usb: smsc95xx: Limit packet length to skb->lenSzymon Heidrich1-0/+6
Packet length retrieved from descriptor may be larger than the actual socket buffer length. In such case the cloned skb passed up the network stack will leak kernel memory contents. Fixes: 2f7ca802bdae ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver") Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20230316101954.75836-1-szymon.heidrich@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-17net: usb: smsc75xx: Move packet length check to prevent kernel panic in skb_pullSzymon Heidrich1-2/+8
Packet length check needs to be located after size and align_count calculation to prevent kernel panic in skb_pull() in case rx_cmd_a & RX_CMD_A_RED evaluates to true. Fixes: d8b228318935 ("net: usb: smsc75xx: Limit packet length to skb->len") Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Link: https://lore.kernel.org/r/20230316110540.77531-1-szymon.heidrich@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15net: usb: smsc75xx: Limit packet length to skb->lenSzymon Heidrich1-1/+2
Packet length retrieved from skb data may be larger than the actual socket buffer length (up to 9026 bytes). In such case the cloned skb passed up the network stack will leak kernel memory contents. Fixes: d0cad871703b ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver") Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-07net: usb: qmi_wwan: add Telit 0x1080 compositionEnrico Sau1-0/+1
Add the following Telit FE990 composition: 0x1080: tty, adb, rmnet, tty, tty, tty, tty Signed-off-by: Enrico Sau <enrico.sau@gmail.com> Link: https://lore.kernel.org/r/20230306120528.198842-1-enrico.sau@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-07net: usb: cdc_mbim: avoid altsetting toggling for Telit FE990Enrico Sau1-0/+5
Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit FE990 0x1081 composition in order to avoid bind error. Signed-off-by: Enrico Sau <enrico.sau@gmail.com> Link: https://lore.kernel.org/r/20230306115933.198259-1-enrico.sau@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-03net: lan78xx: fix accessing the LAN7800's internal phy specific registers ↵Yuiko Oshino1-26/+1
from the MAC driver Move the LAN7800 internal phy (phy ID 0x0007c132) specific register accesses to the phy driver (microchip.c). Fix the error reported by Enguerrand de Ribaucourt in December 2022, "Some operations during the cable switch workaround modify the register LAN88XX_INT_MASK of the PHY. However, this register is specific to the LAN8835 PHY. For instance, if a DP8322I PHY is connected to the LAN7801, that register (0x19), corresponds to the LED and MAC address configuration, resulting in unapropriate behavior." I did not test with the DP8322I PHY, but I tested with an EVB-LAN7800 with the internal PHY. Fixes: 14437e3fa284 ("lan78xx: workaround of forced 100 Full/Half duplex mode error") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230301154307.30438-1-yuiko.oshino@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-17Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-4/+4
Some of the devlink bits were tricky, but I think I got it right. Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net/usb: kalmia: Don't pass act_len in usb_bulk_msg error pathMiko Larsson1-4/+4
syzbot reported that act_len in kalmia_send_init_packet() is uninitialized when passing it to the first usb_bulk_msg error path. Jiri Pirko noted that it's pointless to pass it in the error path, and that the value that would be printed in the second error path would be the value of act_len from the first call to usb_bulk_msg.[1] With this in mind, let's just not pass act_len to the usb_bulk_msg error paths. 1: https://lore.kernel.org/lkml/Y9pY61y1nwTuzMOa@nanopsycho/ Fixes: d40261236e8e ("net/usb: Add Samsung Kalmia driver for Samsung GT-B3730") Reported-and-tested-by: syzbot+cd80c5ef5121bfe85b55@syzkaller.appspotmail.com Signed-off-by: Miko Larsson <mikoxyzzz@gmail.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-3/+1
net/devlink/leftover.c / net/core/devlink.c: 565b4824c39f ("devlink: change port event netdev notifier from per-net to global") f05bd8ebeb69 ("devlink: move code to a dedicated directory") 687125b5799c ("devlink: split out core code") https://lore.kernel.org/all/20230208094657.379f2b1a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-06net: USB: Fix wrong-direction WARNING in plusb.cAlan Stern1-3/+1
The syzbot fuzzer detected a bug in the plusb network driver: A zero-length control-OUT transfer was treated as a read instead of a write. In modern kernels this error provokes a WARNING: usb 1-1: BOGUS control dir, pipe 80000280 doesn't match bRequestType c0 WARNING: CPU: 0 PID: 4645 at drivers/usb/core/urb.c:411 usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411 Modules linked in: CPU: 1 PID: 4645 Comm: dhcpcd Not tainted 6.2.0-rc6-syzkaller-00050-g9f266ccaa2f5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 RIP: 0010:usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411 ... Call Trace: <TASK> usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x320/0x4a0 drivers/usb/core/message.c:153 __usbnet_read_cmd+0xb9/0x390 drivers/net/usb/usbnet.c:2010 usbnet_read_cmd+0x96/0xf0 drivers/net/usb/usbnet.c:2068 pl_vendor_req drivers/net/usb/plusb.c:60 [inline] pl_set_QuickLink_features drivers/net/usb/plusb.c:75 [inline] pl_reset+0x2f/0xf0 drivers/net/usb/plusb.c:85 usbnet_open+0xcc/0x5d0 drivers/net/usb/usbnet.c:889 __dev_open+0x297/0x4d0 net/core/dev.c:1417 __dev_change_flags+0x587/0x750 net/core/dev.c:8530 dev_change_flags+0x97/0x170 net/core/dev.c:8602 devinet_ioctl+0x15a2/0x1d70 net/ipv4/devinet.c:1147 inet_ioctl+0x33f/0x380 net/ipv4/af_inet.c:979 sock_do_ioctl+0xcc/0x230 net/socket.c:1169 sock_ioctl+0x1f8/0x680 net/socket.c:1286 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x197/0x210 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The fix is to call usbnet_write_cmd() instead of usbnet_read_cmd() and remove the USB_DIR_IN flag. Reported-and-tested-by: syzbot+2a0e7abd24f1eb90ce25@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Fixes: 090ffa9d0e90 ("[PATCH] USB: usbnet (9/9) module for pl2301/2302 cables") CC: stable@vger.kernel.org Link: https://lore.kernel.org/r/00000000000052099f05f3b3e298@google.com/ Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-21r8152: reduce the control transfer of rtl8152_get_version()Hayes Wang1-4/+5
Reduce the control transfer by moving calling rtl8152_get_version() in rtl8152_probe(). This could prevent from calling rtl8152_get_version() for unnecessary situations. For example, after setting config #2 for the device, there are two interfaces and rtl8152_probe() may be called twice. However, we don't need to call rtl8152_get_version() for this situation. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-21r8152: remove rtl_vendor_mode functionHayes Wang1-38/+1
After commit ec51fbd1b8a2 ("r8152: add USB device driver for config selection"), the code about changing USB configuration in rtl_vendor_mode() wouldn't be run anymore. Therefore, the function could be removed. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
drivers/net/ipa/ipa_interrupt.c drivers/net/ipa/ipa_interrupt.h 9ec9b2a30853 ("net: ipa: disable ipa interrupt during suspend") 8e461e1f092b ("net: ipa: introduce ipa_interrupt_enable()") d50ed3558719 ("net: ipa: enable IPA interrupt handlers separate from registration") https://lore.kernel.org/all/20230119114125.5182c7ab@canb.auug.org.au/ https://lore.kernel.org/all/79e46152-8043-a512-79d9-c3b905462774@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-18r8152: avoid to change cfg for all devicesHayes Wang1-3/+17
The rtl8152_cfgselector_probe() should set the USB configuration to the vendor mode only for the devices which the driver (r8152) supports. Otherwise, no driver would be used for such devices. Fixes: ec51fbd1b8a2 ("r8152: add USB device driver for config selection") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-17net: usb: sr9700: Handle negative lenSzymon Heidrich1-1/+1
Packet len computed as difference of length word extracted from skb data and four may result in a negative value. In such case processing of the buffer should be interrupted rather than setting sr_skb->len to an unexpectedly large value (due to cast from signed to unsigned integer) and passing sr_skb to usbnet_skb_return. Fixes: e9da0b56fe27 ("sr9700: sanity check for packet length") Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Link: https://lore.kernel.org/r/20230114182326.30479-1-szymon.heidrich@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-0/+7
drivers/net/usb/r8152.c be53771c87f4 ("r8152: add vendor/device ID pair for Microsoft Devkit") ec51fbd1b8a2 ("r8152: add USB device driver for config selection") https://lore.kernel.org/all/20230113113339.658c4723@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-12r8152: add vendor/device ID pair for Microsoft DevkitAndre Przywara1-0/+1
The Microsoft Devkit 2023 is a an ARM64 based machine featuring a Realtek 8153 USB3.0-to-GBit Ethernet adapter. As in their other machines, Microsoft uses a custom USB device ID. Add the respective ID values to the driver. This makes Ethernet work on the MS Devkit device. The chip has been visually confirmed to be a RTL8153. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20230111133228.190801-1-andre.przywara@arm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-09cdc_ether: no need to blacklist any r8152 devicesBjørn Mork1-114/+0
The r8152 driver does not need this anymore. Dropping blacklist entries adds optional support for these devices in ECM mode. The 8153 devices are handled by the r8153_ecm driver when in ECM mode, and must still be blacklisted here. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-09r8152: add USB device driver for config selectionBjørn Mork1-32/+81
Subclassing the generic USB device driver to override the default configuration selection regardless of matching interface drivers. The r815x family devices expose a vendor specific function which the r8152 interface driver wants to handle. This is the preferred device mode. Additionally one or more USB class functions are usually supported for hosts lacking a vendor specific driver. The choice is USB configuration based, with one alternate function per configuration. Example device with both NCM and ECM alternate cfgs: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 3 P: Vendor=0bda ProdID=8156 Rev=31.00 S: Manufacturer=Realtek S: Product=USB 10/100/1G/2.5G LAN S: SerialNumber=001000001 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=256mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=00 Driver=r8152 E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=128ms C: #Ifs= 2 Cfg#= 2 Atr=a0 MxPwr=256mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0d Prot=00 Driver= E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=128ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=01 Driver= I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver= E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms C: #Ifs= 2 Cfg#= 3 Atr=a0 MxPwr=256mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver= E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=128ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver= I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver= E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms A problem with this is that Linux will prefer class functions over vendor specific functions. Using the above example, Linux defaults to cfg #2, running the device in a sub-optimal NCM mode. Previously we've attempted to work around the problem by blacklisting the devices in the ECM class driver "cdc_ether", and matching on the ECM class function in the vendor specific interface driver. The latter has been used to switch back to the vendor specific configuration when the driver is probed for a class function. This workaround has several issues; - class driver blacklists is additional maintanence cruft in an unrelated driver - class driver blacklists prevents users from optionally running the devices in class mode - each device needs double match entries in the vendor driver - the initial probing as a class function slows down device discovery Now these issues have become even worse with the introduction of firmware supporting both NCM and ECM, where NCM ends up as the default mode in Linux. To use the same workaround, we now have to blacklist the devices in to two different class drivers and add yet another match entry to the vendor specific driver. This patch implements an alternative workaround strategy - independent of the interface drivers. It avoids adding a blacklist to the cdc_ncm driver and will let us remove the existing blacklist from the cdc_ether driver. As an additional bonus, removing the blacklists allow users to select one of the other device modes if wanted. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-09usbnet: optimize usbnet_bh() to reduce CPU loadLeesoo Ahn1-12/+17
The current source pushes skb into dev-done queue by calling skb_dequeue_tail() and then pop it by skb_dequeue() to branch to rx_cleanup state for freeing urb/skb in usbnet_bh(). It takes extra CPU load, 2.21% (skb_queue_tail) as follows, - 11.58% 0.26% swapper [k] usbnet_bh - 11.32% usbnet_bh - 6.43% skb_dequeue 6.34% _raw_spin_unlock_irqrestore - 2.21% skb_queue_tail 2.19% _raw_spin_unlock_irqrestore - 1.68% consume_skb - 0.97% kfree_skbmem 0.80% kmem_cache_free 0.53% skb_release_data To reduce the extra CPU load use return values to call helper function usb_free_skb() to free the resources instead of calling skb_queue_tail() and skb_dequeue() for push and pop respectively. - 7.87% 0.25% swapper [k] usbnet_bh - 7.62% usbnet_bh - 4.81% skb_dequeue 4.74% _raw_spin_unlock_irqrestore - 1.75% consume_skb - 0.98% kfree_skbmem 0.78% kmem_cache_free 0.58% skb_release_data 0.53% smsc95xx_rx_fixup Signed-off-by: Leesoo Ahn <lsahn@ooseel.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-06net: usb: cdc_ether: add support for Thales Cinterion PLS62-W modemHui Wang1-0/+6
This modem has 7 interfaces, 5 of them are serial interfaces and are driven by cdc_acm, while 2 of them are wwan interfaces and are driven by cdc_ether: If 0: Abstract (modem) If 1: Abstract (modem) If 2: Abstract (modem) If 3: Abstract (modem) If 4: Abstract (modem) If 5: Ethernet Networking If 6: Ethernet Networking Without this change, the 2 network interfaces will be named to usb0 and usb1, our QA think the names are confusing and filed a bug on it. After applying this change, the name will be wwan0 and wwan1, and they could work well with modem manager. Signed-off-by: Hui Wang <hui.wang@canonical.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230105034249.10433-1-hui.wang@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-05Merge tag 'net-6.2-rc3' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, wifi, and netfilter. Current release - regressions: - bpf: fix nullness propagation for reg to reg comparisons, avoid null-deref - inet: control sockets should not use current thread task_frag - bpf: always use maximal size for copy_array() - eth: bnxt_en: don't link netdev to a devlink port for VFs Current release - new code bugs: - rxrpc: fix a couple of potential use-after-frees - netfilter: conntrack: fix IPv6 exthdr error check - wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes - eth: dsa: qca8k: various fixes for the in-band register access - eth: nfp: fix schedule in atomic context when sync mc address - eth: renesas: rswitch: fix getting mac address from device tree - mobile: ipa: use proper endpoint mask for suspend Previous releases - regressions: - tcp: add TIME_WAIT sockets in bhash2, fix regression caught by Jiri / python tests - net: tc: don't intepret cls results when asked to drop, fix oob-access - vrf: determine the dst using the original ifindex for multicast - eth: bnxt_en: - fix XDP RX path if BPF adjusted packet length - fix HDS (header placement) and jumbo thresholds for RX packets - eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf, avoid memory corruptions Previous releases - always broken: - ulp: prevent ULP without clone op from entering the LISTEN status - veth: fix race with AF_XDP exposing old or uninitialized descriptors - bpf: - pull before calling skb_postpull_rcsum() (fix checksum support and avoid a WARN()) - fix panic due to wrong pageattr of im->image (when livepatch and kretfunc coexist) - keep a reference to the mm, in case the task is dead - mptcp: fix deadlock in fastopen error path - netfilter: - nf_tables: perform type checking for existing sets - nf_tables: honor set timeout and garbage collection updates - ipset: fix hash:net,port,net hang with /0 subnet - ipset: avoid hung task warning when adding/deleting entries - selftests: net: - fix cmsg_so_mark.sh test hang on non-x86 systems - fix the arp_ndisc_evict_nocarrier test for IPv6 - usb: rndis_host: secure rndis_query check against int overflow - eth: r8169: fix dmar pte write access during suspend/resume with WOL - eth: lan966x: fix configuration of the PCS - eth: sparx5: fix reading of the MAC address - eth: qed: allow sleep in qed_mcp_trace_dump() - eth: hns3: - fix interrupts re-initialization after VF FLR - fix handling of promisc when MAC addr table gets full - refine the handling for VF heartbeat - eth: mlx5: - properly handle ingress QinQ-tagged packets on VST - fix io_eq_size and event_eq_size params validation on big endian - fix RoCE setting at HCA level if not supported at all - don't turn CQE compression on by default for IPoIB - eth: ena: - fix toeplitz initial hash key value - account for the number of XDP-processed bytes in interface stats - fix rx_copybreak value update Misc: - ethtool: harden phy stat handling against buggy drivers - docs: netdev: convert maintainer's doc from FAQ to a normal document" * tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits) caif: fix memory leak in cfctrl_linkup_request() inet: control sockets should not use current thread task_frag net/ulp: prevent ULP without clone op from entering the LISTEN status qed: allow sleep in qed_mcp_trace_dump() MAINTAINERS: Update maintainers for ptp_vmw driver usb: rndis_host: Secure rndis_query check against int overflow net: dpaa: Fix dtsec check for PCS availability octeontx2-pf: Fix lmtst ID used in aura free drivers/net/bonding/bond_3ad: return when there's no aggregator netfilter: ipset: Rework long task execution when adding/deleting entries netfilter: ipset: fix hash:net,port,net hang with /0 subnet net: sparx5: Fix reading of the MAC address vxlan: Fix memory leaks in error path net: sched: htb: fix htb_classify() kernel-doc net: sched: cbq: dont intepret cls results when asked to drop net: sched: atm: dont intepret cls results when asked to drop dt-bindings: net: marvell,orion-mdio: Fix examples dt-bindings: net: sun8i-emac: Add phy-supply property net: ipa: use proper endpoint mask for suspend selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier ...
2023-01-03usb: rndis_host: Secure rndis_query check against int overflowSzymon Heidrich1-1/+2
Variables off and len typed as uint32 in rndis_query function are controlled by incoming RNDIS response message thus their value may be manipulated. Setting off to a unexpectetly large value will cause the sum with len and 8 to overflow and pass the implemented validation step. Consequently the response pointer will be referring to a location past the expected buffer boundaries allowing information leakage e.g. via RNDIS_OID_802_3_PERMANENT_ADDRESS OID. Fixes: ddda08624013 ("USB: rndis_host, various cleanups") Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-26treewide: Convert del_timer*() to timer_shutdown*()Steven Rostedt (Google)1-1/+1
Due to several bugs caused by timers being re-armed after they are shutdown and just before they are freed, a new state of timers was added called "shutdown". After a timer is set to this state, then it can no longer be re-armed. The following script was run to find all the trivial locations where del_timer() or del_timer_sync() is called in the same function that the object holding the timer is freed. It also ignores any locations where the timer->function is modified between the del_timer*() and the free(), as that is not considered a "trivial" case. This was created by using a coccinelle script and the following commands: $ cat timer.cocci @@ expression ptr, slab; identifier timer, rfield; @@ ( - del_timer(&ptr->timer); + timer_shutdown(&ptr->timer); | - del_timer_sync(&ptr->timer); + timer_shutdown_sync(&ptr->timer); ) ... when strict when != ptr->timer ( kfree_rcu(ptr, rfield); | kmem_cache_free(slab, ptr); | kfree(ptr); ) $ spatch timer.cocci . > /tmp/t.patch $ patch -p1 < /tmp/t.patch Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ] Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ] Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-12-08net: asix: add support for the Linux Automation GmbH USB 10Base-T1LOleksij Rempel1-0/+18
Add ASIX based USB 10Base-T1L adapter support: https://linux-automation.com/en/products/usb-t1l.html Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20221205132102.2941732-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-0/+2
tools/lib/bpf/ringbuf.c 927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap") b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c") https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-29net: usb: cdc_ether: add u-blox 0x1343 compositionDavide Tronchin1-0/+6
Add CDC-ECM support for LARA-L6. LARA-L6 module can be configured (by AT interface) in three different USB modes: * Default mode (Vendor ID: 0x1546 Product ID: 0x1341) with 4 serial interfaces * RmNet mode (Vendor ID: 0x1546 Product ID: 0x1342) with 4 serial interfaces and 1 RmNet virtual network interface * CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1343) with 4 serial interface and 1 CDC-ECM virtual network interface In CDC-ECM mode LARA-L6 exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parset/alternative functions If 4: CDC-ECM interface Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> Link: https://lore.kernel.org/r/20221124112811.3548-1-davide.tronchin.94@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-23net/cdc_ncm: Fix multicast RX support for CDC NCM devices with ZLPSantiago Ruano Rincón1-0/+1
ZLP for DisplayLink ethernet devices was enabled in 6.0: 266c0190aee3 ("net/cdc_ncm: Enable ZLP for DisplayLink ethernet devices"). The related driver_info should be the "same as cdc_ncm_info, but with FLAG_SEND_ZLP". However, set_rx_mode that enables handling multicast traffic was missing in the new cdc_ncm_zlp_info. usbnet_cdc_update_filter rx mode was introduced in linux 5.9 with: e10dcb1b6ba7 ("net: cdc_ncm: hook into set_rx_mode to admit multicast traffic") Without this hook, multicast, and then IPv6 SLAAC, is broken. Fixes: 266c0190aee3 ("net/cdc_ncm: Enable ZLP for DisplayLink ethernet devices") Signed-off-by: Santiago Ruano Rincón <santiago.ruano-rincon@imt-atlantique.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-23net: usb: qmi_wwan: add u-blox 0x1342 compositionDavide Tronchin1-0/+1
Add RmNet support for LARA-L6. LARA-L6 module can be configured (by AT interface) in three different USB modes: * Default mode (Vendor ID: 0x1546 Product ID: 0x1341) with 4 serial interfaces * RmNet mode (Vendor ID: 0x1546 Product ID: 0x1342) with 4 serial interfaces and 1 RmNet virtual network interface * CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1343) with 4 serial interface and 1 CDC-ECM virtual network interface In RmNet mode LARA-L6 exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parset/alternative functions If 4: RMNET interface Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-4/+43
include/linux/bpf.h 1f6e04a1c7b8 ("bpf: Fix offset calculation error in __copy_map_value and zero_map_value") aa3496accc41 ("bpf: Refactor kptr_off_tab into btf_record") f71b2f64177a ("bpf: Refactor map->off_arr handling") https://lore.kernel.org/all/20221114095000.67a73239@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-17net: usb: smsc95xx: fix external PHY resetAlexandru Tachici1-4/+42
An external PHY needs settling time after power up or reset. In the bind() function an mdio bus is registered. If at this point the external PHY is still initialising, no valid PHY ID will be read and on phy_find_first() the bind() function will fail. If an external PHY is present, wait the maximum time specified in 802.3 45.2.7.1.1. Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support") Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221115114434.9991-2-alexandru.tachici@analog.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-17net: usb: qmi_wwan: add Telit 0x103a compositionEnrico Sau1-0/+1
Add the following Telit LE910C4-WWX composition: 0x103a: rmnet Signed-off-by: Enrico Sau <enrico.sau@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20221115105859.14324-1-enrico.sau@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-08net: remove explicit phylink_generic_validate() referencesRussell King (Oracle)1-1/+0
Virtually all conventional network drivers are now converted to use phylink_generic_validate() - only DSA drivers and fman_memac remain, so lets remove the necessity for network drivers to explicitly set this member, and default to phylink_generic_validate() when unset. This is possible as .validate must currently be set. Any remaining instances that have not been addressed by this patch can be fixed up later. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/E1or0FZ-001tRa-DI@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-04net: usb: Use kstrtobool() instead of strtobool()Christophe JAILLET2-3/+5
strtobool() is the same as kstrtobool(). However, the latter is more used within the kernel. In order to remove strtobool() and slightly simplify kstrtox.h, switch to the other function name. While at it, include the corresponding header file (<linux/kstrtox.h>). Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/d4432a67b6f769cac0a9ec910ac725298b64e102.1667336095.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-31drivers: net: convert to boolean for the mac_managed_pm flagDenis Kirjanov1-2/+2
Signed-off-by: Dennis Kirjanov <dkirjanov@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-08Merge tag 'tty-6.1-rc1' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 6.1-rc1. Lots of cleanups in here, no real new functionality this time around, with the diffstat being that we removed more lines than we added! Included in here are: - termios unification cleanups from Al Viro, it's nice to finally get this work done - tty serial transmit cleanups in various drivers in preparation for more cleanup and unification in future releases (that work was not ready for this release) - n_gsm fixes and updates - ktermios cleanups and code reductions - dt bindings json conversions and updates for new devices - some serial driver updates for new devices - lots of other tiny cleanups and janitorial stuff. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits) serial: cpm_uart: Don't request IRQ too early for console port tty: serial: do unlock on a common path in altera_jtaguart_console_putc() tty: serial: unify TX space reads under altera_jtaguart_tx_space() tty: serial: use FIELD_GET() in lqasc_tx_ready() tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar() tty: serial: allow pxa.c to be COMPILE_TESTed serial: stm32: Fix unused-variable warning tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL serial: 8250: Fix restoring termios speed after suspend serial: Deassert Transmit Enable on probe in driver-specific way serial: 8250_dma: Convert to use uart_xmit_advance() serial: 8250_omap: Convert to use uart_xmit_advance() MAINTAINERS: Solve warning regarding inexistent atmel-usart binding serial: stm32: Deassert Transmit Enable on ->rs485_config() serial: ar933x: Deassert Transmit Enable on ->rs485_config() tty: serial: atmel: Use FIELD_PREP/FIELD_GET tty: serial: atmel: Make the driver aware of the existence of GCLK tty: serial: atmel: Only divide Clock Divisor if the IP is USART tty: serial: atmel: Separate mode clearing between UART and USART dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock ...
2022-10-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+3
Merge in the left-over fixes before the net-next pull-request. Conflicts: drivers/net/ethernet/mediatek/mtk_ppe.c ae3ed15da588 ("net: ethernet: mtk_eth_soc: fix state in __mtk_foe_entry_clear") 9d8cb4c096ab ("net: ethernet: mtk_eth_soc: add foe_entry_size to mtk_eth_soc") https://lore.kernel.org/all/6cb6893b-4921-a068-4c30-1109795110bb@tessares.net/ kernel/bpf/helpers.c 8addbfc7b308 ("bpf: Gate dynptr API behind CAP_BPF") 5679ff2f138f ("bpf: Move bpf_loop and bpf_for_each_map_elem under CAP_BPF") 8a67f2de9b1d ("bpf: expose bpf_strtol and bpf_strtoul to all program types") https://lore.kernel.org/all/20221003201957.13149-1-daniel@iogearbox.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-04r8152: Rate limit overflow messagesAndrew Gaul1-1/+3
My system shows almost 10 million of these messages over a 24-hour period which pollutes my logs. Signed-off-by: Andrew Gaul <gaul@google.com> Link: https://lore.kernel.org/r/20221002034128.2026653-1-gaul@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-1/+7
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-03 15:12:27 +0300