summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath11k/dp.c
AgeCommit message (Collapse)AuthorFilesLines
2023-11-30wifi: ath11k: Update Qualcomm Innovation Center, Inc. copyrightsJeff Johnson1-1/+1
Update the copyright for all ath11k files modified on behalf of Qualcomm Innovation Center, Inc. in 2021 through 2023. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231128-ath12kcopyrights-v1-2-be0b7408cbac@quicinc.com
2023-09-28wifi: ath11k: remove unnecessary (void*) conversionsWu Yunchuan1-1/+1
No need cast (void *) to (struct ath11k_base *), struct hal_rx_msdu_link *), (struct ath11k_buffer_addr *) or other types. Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230919045150.524304-1-yunchuan@nfschina.com
2023-04-17wifi: ath11k: Ignore frags from uninitialized peer in dp.Harshitha Prem1-1/+3
When max virtual ap interfaces are configured in all the bands with ACS and hostapd restart is done every 60s, a crash is observed at random times. In this certain scenario, a fragmented packet is received for self peer, for which rx_tid and rx_frags are not initialized in datapath. While handling this fragment, crash is observed as the rx_frag list is uninitialised and when we walk in ath11k_dp_rx_h_sort_frags, skb null leads to exception. To address this, before processing received fragments we check dp_setup_done flag is set to ensure that peer has completed its dp peer setup for fragment queue, else ignore processing the fragments. Call trace: ath11k_dp_process_rx_err+0x550/0x1084 [ath11k] ath11k_dp_service_srng+0x70/0x370 [ath11k] 0xffffffc009693a04 __napi_poll+0x30/0xa4 net_rx_action+0x118/0x270 __do_softirq+0x10c/0x244 irq_exit+0x64/0xb4 __handle_domain_irq+0x88/0xac gic_handle_irq+0x74/0xbc el1_irq+0xf0/0x1c0 arch_cpu_idle+0x10/0x18 do_idle+0x104/0x248 cpu_startup_entry+0x20/0x64 rest_init+0xd0/0xdc arch_call_rest_init+0xc/0x14 start_kernel+0x480/0x4b8 Code: f9400281 f94066a2 91405021 b94a0023 (f9406401) Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Nagarajan Maran <quic_nmaran@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403184155.8670-2-quic_nmaran@quicinc.com
2022-09-16wifi: ath11k: Fix miscellaneous spelling errorsJeff Johnson1-1/+1
Fix misspellings flagged by 'codespell'. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220909145535.20437-1-quic_jjohnson@quicinc.com
2022-09-10wifi: ath11k: Increase TCL data ring size for WCN6750Manikanta Pubbisetty1-1/+1
Increase TCL data ring size to 2048 for WCN6750. This is needed to meet 160 MHz TX throughput. Add a new hw_param to indicate the TX ring size for individual devices. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220905071805.31625-4-quic_mpubbise@quicinc.com
2022-09-10wifi: ath11k: Add multi TX ring support for WCN6750Manikanta Pubbisetty1-10/+14
Currently in the case of WCN6750, only one TCL ring is used for TX, this is limiting the TX throughput in 160 MHz case, enabling multiple TCL rings on WCN6750 has shown an improvement of nearly 300 Mbps in the case of TCP TX, therefore add the support of multi TX ring for WCN6750. Currently TCL ring is selected based on CPU ID, this logic cannot be applied for WCN6750 as there is chance of out of order TX of packets and to avoid this, choose TCL ring based on flow hash so that packets of the same flow will end up on same TCL ring. For the same reason, TCL ring retry logic is also not applicable for WCN6750. Also the mapping of TCL, WBM & RBM IDs for WCN6750 is different from existing devices. Create a new TCM/WBM/RBM mapping for WCN6750. Change does not impact existing ath11k devices. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220905071805.31625-3-quic_mpubbise@quicinc.com
2021-12-09ath11k: Process full monitor mode rx supportAnilkumar Kolli1-0/+1
In full monitor mode, monitor destination ring is read before monitor status ring. mon_dst_ring has ppdu id, reap till the end of PPDU. Add all the MPDUs to list. Start processing the status ring, if PPDU id in status ring is lagging behind, reap the status ring, once the PPDU ID matches, deliver the MSDU to upper layer. If status PPDU id leading, reap the mon_dst_ring. The advantage with full monitor mode is hardware has status buffers available for all the MPDUs in mon_dst_ring, which makes it possible to deliver more frames to be seen on sniffer. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01734-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1638881695-22155-4-git-send-email-akolli@codeaurora.org
2021-11-15ath11k: avoid while loop in ring selection of tx completion interruptP Praneesh1-5/+4
Currently while loop is used to find the tx completion ring number and it is not required since the tx ring mask and the group id can be combined to directly fetch the ring number. Hence remove the while loop and directly get the ring number from tx mask and group id. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01734-QCAHKSWPL_SILICONZ-1 v2 Co-developed-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: P Praneesh <ppranees@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1630560820-21905-11-git-send-email-ppranees@codeaurora.org
2021-11-15ath11k: allocate HAL_WBM2SW_RELEASE ring from cacheable memoryP Praneesh1-0/+1
Similar to REO destination ring, also allocate HAL_WBM2SW_RELEASE from cacheable memory so that descriptors could be prefetched during tx completion handling. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01734-QCAHKSWPL_SILICONZ-1 v2 Co-developed-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: P Praneesh <ppranees@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1630560820-21905-9-git-send-email-ppranees@codeaurora.org
2021-11-15ath11k: allocate dst ring descriptors from cacheable memoryP Praneesh1-5/+33
tcl_data and reo_dst rings are currently being allocated using dma_allocate_coherent() which is non cacheable. Allocating ring memory from cacheable memory area allows cached descriptor access and prefetch next descriptors to optimize CPU usage during descriptor processing on NAPI. Based on the hardware param we can enable or disable this feature for the corresponding platform. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01695-QCAHKSWPL_SILICONZ-1 Co-developed-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Co-developed-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: P Praneesh <ppranees@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1630560820-21905-3-git-send-email-ppranees@codeaurora.org
2021-10-25ath11k: change return buffer manager for QCA6390Baochen Qiang1-1/+3
QCA6390 firmware uses HAL_RX_BUF_RBM_SW1_BM, not HAL_RX_BUF_RBM_SW3_BM. This is needed to fix a case where an A-MSDU has an unexpected LLC/SNAP header in the first subframe (CVE-2020-24588). Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Baochen Qiang <bqiang@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210914163726.38604-2-jouni@codeaurora.org
2021-10-11ath11k: Change number of TCL rings to one for QCA6390Baochen Qiang1-5/+5
Some targets, QCA6390 for example, use only one TCL ring, it is better to initialize only one ring and leave others untouched for such targets. This is a theoretical fix found during code review, no visible impact. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Baochen Qiang <bqiang@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210914163726.38604-1-jouni@codeaurora.org
2021-06-12ath11k: setup REO for WCN6855Baochen Qiang1-14/+2
WCN6855 needs a different reo configuration, so add separate handling for this target in ath11k_hw_ops. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Baochen Qiang <bqiang@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210511162214.29475-4-jouni@codeaurora.org
2020-12-12ath11k: implement suspend for QCA6390 PCI devicesCarl Huang1-1/+1
Now that all the needed pieces are in place implement suspend support QCA6390 PCI devices. All other devices will return -EOPNOTSUPP during suspend. The suspend is implemented by switching the firmware to WoW mode during suspend, so the firmware will be running on low power mode while host is in suspend. At the moment we are not able to shutdown and fully power off the device due to bugs in MHI subsystem, so WoW mode is a workaround for the time being. During suspend we enable WoW mode, disable CE irq and DP irq, then put MHI to suspend state. During resume, driver resumes MHI firstly, then enables CE irq and dp IRQ, and sends WoW wakeup command to firmware. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-11-git-send-email-kvalo@codeaurora.org
2020-10-28ath11k: remove repeated words in comments and warningsKalle Valo1-1/+1
Found by latest checkpatch. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1603803705-22447-1-git-send-email-kvalo@codeaurora.org
2020-10-01ath11k: start a timer to update REO cmd ringCarl Huang1-0/+6
Start a timer to update REO HP if HP isn't updated to target. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1601544890-13450-6-git-send-email-kvalo@codeaurora.org
2020-10-01ath11k: start a timer to update TCL HPCarl Huang1-0/+91
The timer is to check if TCL HP isn't updated to target. The timer will postpone itself if there are TX operations during the interval, otherwise the timer handler updates the HP again so the index value in HP register will be forwarded to target register, and the timer stops afterwards. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1601544890-13450-5-git-send-email-kvalo@codeaurora.org
2020-10-01ath11k: add packet log support for QCA6390Carl Huang1-0/+2
Add packet log support for QCA6390, otherwise the data connection will stall within a minute or so. Enable it via debugfs and use trace-cmd to capture the pktlogs. echo 0xffff 1 > /sys/kernel/debug/ath11k/qca6390\ hw2.0/mac0/pktlog_filter The mon status ring doesn't support interrupt so far, so host starts a timer to reap this ring. The timer handler also reaps the rxdma_err_dst_ring in case of monitor mode. As QCA6390 requires bss created ahead of starting vdev, so check vdev_start_delay for monitor mode. For QCA6390, it uses wbm_desc_rel_ring to return descriptors. It also uses rx_refill_buf_ring to fill mon buffer instead of rxdma_mon_buf_ring. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1601463073-12106-2-git-send-email-kvalo@codeaurora.org
2020-10-01ath11k: Use GFP_ATOMIC instead of GFP_KERNEL in idr_allocGovind Singh1-2/+1
With SLUB DEBUG CONFIG below crash is seen as kmem_cache_alloc is being called in non-atomic context. To fix this issue, use GFP_ATOMIC instead of GFP_KERNEL in idr_alloc. BUG: sleeping function called from invalid context at mm/slab.h:393 [ 59.805451] Call trace: [ 59.807971] ___might_sleep+0x110/0x118 [ 59.811915] __might_sleep+0x50/0x84 [ 59.815593] kmem_cache_alloc+0x60/0x3e0 [ 59.819630] radix_tree_node_alloc+0x4c/0xe8 [ 59.824014] radix_tree_extend+0x8c/0x164 [ 59.828135] idr_get_free_cmn+0xa4/0x27c [ 59.832167] idr_alloc_cmn+0x70/0xe8 [ 59.835856] ath11k_dp_rxbufs_replenish+0x1e8/0x310 [ath11k] [ 59.841687] ath11k_dp_rxdma_ring_buf_setup+0x50/0x60 [ath11k] [ 59.847693] ath11k_dp_rx_pdev_alloc+0x260/0x4d8 [ath11k] [ 59.853248] ath11k_dp_pdev_alloc+0x40/0xc4 [ath11k] [ 59.858357] ath11k_core_qmi_firmware_ready+0x3c4/0x490 [ath11k] [ 59.864538] ath11k_qmi_driver_event_work+0x4c8/0x1178 [ath11k] [ 59.870620] process_one_work+0x208/0x434 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1601399736-3210-9-git-send-email-kvalo@codeaurora.org
2020-09-22ath11k: debugfs: use ath11k_debugfs_ prefixKalle Valo1-1/+1
As these functions are now defined in debugfs.c change the prefix to use ath11k_debugfs_ as well. No functional changes. Compile tested only. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1600264523-12939-2-git-send-email-kvalo@codeaurora.org
2020-08-18ath11k: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200727194415.GA1275@embeddedor
2020-08-18ath11k: process both lmac rings for QCA6390Carl Huang1-24/+35
For QCA6390, the num_radios is 1 but it needs to process 2 lmac rings. So use NUM_RXDMA_PER_PDEV to do another loop. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597555891-26112-8-git-send-email-kvalo@codeaurora.org
2020-08-18ath11k: assign correct search flag and type for QCA6390Carl Huang1-4/+11
QCA6390 doesn't enable V2 map and ummap event, so the addr search flags and type is different from IPQ8074. Assign correct search flags and type for QCA6390. Without this change, ping sometimes fails. With this change, now ping is always successful. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597555891-26112-7-git-send-email-kvalo@codeaurora.org
2020-08-18ath11k: setup QCA6390 rings for both rxdmasCarl Huang1-2/+5
For QCA6390, only one pdev is created and this pdev manages both lmacs, thus both rxdmas. So host needs to initialize all rxdma related rings for one pdev. Another difference is for QCA6390, host fills rxbuf to firmware and firmware further fills the rxbuf to rxbuf ring for each rxdma. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597555891-26112-4-git-send-email-kvalo@codeaurora.org
2020-08-18ath11k: enable DP interrupt setup for QCA6390Carl Huang1-0/+108
QCA6390 uses MSI interrupt, so need to configure msi_add and msi_data to dp srngs. As there are so many DP srngs, so need to group them. Each group shares one MSI interrupt. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597555891-26112-2-git-send-email-kvalo@codeaurora.org
2020-08-17ath11k: hal: create hw_srng_config dynamicallyKalle Valo1-4/+4
On QCA6390 reg_start and reg_size values are different from IPQ8074 so we need to change the values runtime. As we can't modify a static const variable hw_srng_config directly, instead use it as a template, copy it and modify the copy with correct values. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597389030-13887-12-git-send-email-kvalo@codeaurora.org
2020-08-17ath11k: add simple PCI client driver for QCA6390 chipsetGovind Singh1-0/+1
QCA6390 is a PCI based 11ax chipset, split AHB into own kernel module ath11k_ahb.ko and add ath11k_pci.ko for PCI devices. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597309466-19688-5-git-send-email-kvalo@codeaurora.org
2020-08-17ath11k: move ring mask definitions to hw_paramsKalle Valo1-11/+11
This is needed for splitting ahb and pci modules as they have different ring mask settings. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597309466-19688-4-git-send-email-kvalo@codeaurora.org
2020-06-15ath11k: Add direct buffer ring supportKarthikeyan Periyasamy1-1/+2
Add direct buffer ring (dbring) with helper API, which is used by the spectral scan. Initialise the direct buffer ring based on the dma ring capability, which get announced in the wmi service ready extended event. This ring is slightly changed from data path rings. Compare to data path ring this ring shares the hp and tp address to firmware though WMI commands. Also the replenish buffer size is derived from firmware announcement. driver receive indication through WMI event WMI_PDEV_DMA_RING_BUF_RELEASE_EVENTID. Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1591688014-26441-1-git-send-email-periyasa@codeaurora.org
2020-05-11ath11k: Add support for multibus supportGovind Singh1-0/+1
Current design supports only AHB interface for 11ax chipset. Refactor the code by adding hif layer for bus level abstraction to support PCI based device. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200506094400.4740-2-govinds@codeaurora.org
2020-05-04ath11k: fix error return code in ath11k_dp_alloc()Wei Yongjun1-1/+3
Fix to return negative error code -ENOMEM from the error handling case instead of 0, as done elsewhere in this function. Fixes: d0998eb84ed3 ("ath11k: optimise ath11k_dp_tx_completion_handler") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200427104621.23752-1-weiyongjun1@huawei.com
2020-04-27ath11k: fix reo flush sendKarthikeyan Periyasamy1-0/+2
we are sending the reo flush command for the deleted peer tid after the ageout period reaches 1 second. This handling causes reo ring get full when more than 128 clients are disconnected continuously. so added the count for flush list and reo flush command is triggered after the list count reaches the threshold value, it is configured as 64 (half of the reo ring). This will avoid the situation where reo ring get full. Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1587552378-4884-1-git-send-email-periyasa@codeaurora.org
2020-03-18ath11k: Perform per-msdu rx processingSriram R1-11/+7
As Hash based reo destination selection is configured, the decapped packets reach different reo destintion rings based on the destintaion ring selected for the computed hash (based on the 5-tuple {ip src/ip dst/src port/dst port/protocol}) by hw and as configured by driver. Hence the current implementation of amsdu list based processing after all the subframes of amsdu are received (since all msdu's for a pdev are received in same reo dest ring), is not applicable here and hence is replaced with per msdu based handling as these subframes can be received in different reo dest rings. Also, as some of the rx descriptor fields might be valid only for the first msdu (for ex. received 80211 header, encryption type, etc), it might not be useful now as we cannot sync between different subframes received in different rings. Hence do not rely on those fields and replace them with fieds valid only on per msdu descriptors. Also cache other details such as encryption type for a peer so that it can be reused when a packet is received from it. Co-developed-by: Tamizh Chelvam Raja <tamizhr@codeaurora.org> Signed-off-by: Tamizh Chelvam Raja <tamizhr@codeaurora.org> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-03-18ath11k: Configure hash based reo destination ring selectionSriram R1-1/+16
Current implementation of pdev based reo destination ring selection is replaced by hash based ring selection so as to ensure all the available rings are utilized for better performance. The 4 reo destination rings are selected by the HW based on the hash value computed from the received packet based on the 5 tuple {ip src/ip dst/src port/dst port/protocol}. Out of the 32 hash values used by the hw, the driver assigns 8 values per reo destination ring to each of the 4 reo destination rings. Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-03-17ath11k: enable PN offloadManikanta Pubbisetty1-2/+2
Enabling PN checking in the hardware; hardware checks the PN of the received packets and reports the errors to the host for further handling; default action is to drop such packets. TSC (TKIP sequence counter) validation is also offloaded. Hardware validates PN/TSC only for unicast packets; for group addressed packets, PN validation is done in mac80211. PN errors are reported to the driver via WBM RX release ring and can be dumped by using the following command. "cat /sys/kernel/debug/ath11k/soc_rx_stats | grep -i pn" Sample Output: PN check fail: 210 Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-03-17ath11k: handle RX fragmentsManikanta Pubbisetty1-0/+8
IPQ8074 HW has support to verify the PN of the received frames. For all frames except for fragmented ones, HW checks the PN and delivers them to the driver. For fragmented frames, driver is required to do a little more; it has to reassemble the fragments and then reinject them to the HW for verifying the PN. Currently, to keep the logic simple, PN verifcation is disabled in HW and is handled in mac80211 for all the frames (fragmented and unfragmented). On the contrary, offloading PN Validation to the HW brings important benefits. It reduces CPU cycles spent on the host CPU for verifying the same; helps in enabling features which improve performance like mac80211 fast RX path, enabling multiple REO rings for parallel RX processing, 802.11 decapsulation offloading. All these features are dependent on PN offload which in turn is dependent on handling of the received fragments in the driver. When TKIP security is used, additional handling is required while processing the fragments; since MIC is computed on an MSDU in TKIP, only the last fragment has the MIC info. In this case, driver has to compute the MIC after reassembly and compare it against the MIC present in the frame. For this, MICHAEL_MIC kernel crypto library APIs are used and the dependencies are appropriately set. Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-03-11ath11k: config reorder queue for all tids during peer setupGovindaraj Saminathan1-14/+27
Currently rx tid setup is happening for TID 0 and TID 16 during peer setup. And if other TID packets received for the peer it will be redirected to rx error ring and not through reo ring. And this rx tid configuration cannot be done in the rx error ring path since it is a atomic context. So moving the rx tid setup for all tids during the peer setup. This is required to enable PN offload functionality to route all packets through reo ring. Co-developed-by: Tamizh Chelvam <tamizhr@codeaurora.org> Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18ath11k: optimise ath11k_dp_tx_completion_handlerJohn Crispin1-10/+6
the current code does 4 memcpys for each completion frame. 1) duplicate the desc 2 + 3) inside kfifo insertion 4) kfifo remove The code simply drops the kfifo and uses a trivial ring buffer. This requires a single memcpy for insertion. There is no removal needed as we can simply use the inserted data for processing. As the code runs inside the NAPI context it is atomic and there is no need for most of the locking. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath11k: Setup REO destination ring before sending wmi_init commandVasanthakumar Thiagarajan1-2/+8
Firmware expects all the required REO destination rings setup while processing wmi_init command. Not doing this causes connected stations getting disconnected and not able to connect back. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath11k: Fix target crash due to WBM_IDLE_LINK ring desc shortageVasanthakumar Thiagarajan1-3/+3
Make sure the number of WBM_IDLE_LINK ring descriptors is power of 2. This increases the number of descriptors to 32k from the current ~18k to fix the target assert because of the shortage in the descriptors in WBM_IDLE_LINK ring. Remove unnecessary power of 2 calculation in ath11k_dp_link_desc_setup() as it is not required after this change. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-29ath11k: update tcl cmd descriptor parameters for STA modeAnilkumar Kolli1-5/+4
It is observed that ath11k STA mode UL throughput is low. This is due to packets delivered to FW from TCL instead of TQM. TCL AST search fail causes packet delivered to FW, fix this by properly configuring the TCL address search type and ast_hash. STA UL throughput is improved 10times with 11AC AP. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-25ath11k: driver for Qualcomm IEEE 802.11ax devicesKalle Valo1-0/+898
ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-28 21:00:04 +0300