summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)AuthorFilesLines
2022-11-28Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo14-181/+230
ath.git patches for v6.2. Major changes: ath10k * store WLAN firmware version in SMEM image table
2022-11-25wifi: carl9170: Replace zero-length array of trailing structs with flex-arrayKees Cook1-2/+2
Zero-length arrays are deprecated[1] and are being replaced with flexible array members in support of the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy(), correctly instrument array indexing with UBSAN_BOUNDS, and to globally enable -fstrict-flex-arrays=3. Replace zero-length array with flexible-array member. This results in no differences in binary output. [1] https://github.com/KSPP/linux/issues/78 Cc: Christian Lamparter <chunkeey@googlemail.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221118211146.never.395-kees@kernel.org
2022-11-25wifi: ath10k: Store WLAN firmware version in SMEM image tableYoughandhar Chintala2-0/+36
In a SoC based solution, it would be useful to know the versions of the various binary firmware blobs the system is running on. On a QCOM based SoC, this info can be obtained from socinfo debugfs infrastructure. For this to work, respective subsystem drivers have to export the firmware version information to an SMEM based version information table. Having firmware version information at one place will help quickly figure out the firmware versions of various subsystems on the device instead of going through builds/logs in an event of a system crash. Fill WLAN firmware version information in SMEM version table to be printed as part of socinfo debugfs infrastructure on a Qualcomm based SoC. This change is applicable only for SNOC/QMI based targets. Example: cat /sys/kernel/debug/qcom_socinfo/cnss/name QC_IMAGE_VERSION_STRING=WLAN.HL.3.2.2.c10-00754-QCAHLSWMTPL-1 Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2.c10-00754-QCAHLSWMTPL-1 Signed-off-by: Youghandhar Chintala <quic_youghand@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221117180534.2267-1-quic_youghand@quicinc.com
2022-11-18Merge tag 'wireless-next-2022-11-18' of ↵David S. Miller21-146/+273
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.2 Second set of patches for v6.2. Only driver patches this time, nothing really special. Unused platform data support was removed from wl1251 and rtw89 got WoWLAN support. Major changes: ath11k * support configuring channel dwell time during scan rtw89 * new dynamic header firmware format support * Wake-over-WLAN support rtl8xxxu * enable IEEE80211_HW_SUPPORT_FAST_XMIT ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-17wifi: ath10k: Remove redundant argument offsetZhi-Jun You1-12/+7
This argument of ath10k_htt_rx_h_frag_pn_check() is always set to 0 so drop this. Signed-off-by: Zhi-Jun You <hujy652@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221110164025.14418-1-hujy652@gmail.com
2022-11-17wifi: ath10k: Fix return value in ath10k_pci_init()Xiu Jianfeng1-8/+12
This driver is attempting to register to support two different buses. if either of these is successful then ath10k_pci_init() should return 0 so that hardware attached to the successful bus can be probed and supported. only if both of these are unsuccessful should ath10k_pci_init() return an errno. Fixes: 0b523ced9a3c ("ath10k: add basic skeleton to support ahb") Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221110061926.18163-1-xiujianfeng@huawei.com
2022-11-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-6/+2
drivers/net/can/pch_can.c ae64438be192 ("can: dev: fix skb drop check") 1dd1b521be85 ("can: remove obsolete PCH CAN driver") https://lore.kernel.org/all/20221110102509.1f7d63cc@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-09wifi: ath10k: Use IEEE80211_SEQ_TO_SN() for seq_ctrl conversionZhi-Jun You1-3/+3
Use IEEE80211_SEQ_TO_SN() macro to convert seq_ctrl to sn for better readability. Signed-off-by: Zhi-Jun You <hujy652@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221106162227.1119-1-hujy652@gmail.com
2022-11-09wifi: ath9k: Remove unused variable mismatchColin Ian King1-2/+1
Variable mismatch is just being incremented and it's never used anywhere else. The variable and the increment are redundant so remove it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221104140723.226857-1-colin.i.king@gmail.com
2022-11-08wifi: ath11k: Trigger sta disconnect on hardware restartYoughandhar Chintala3-0/+14
Currently after the hardware restart triggered from the driver, the station interface connection remains intact, since a disconnect trigger is not sent to userspace. This can lead to a problem in targets where the wifi mac sequence is added by the firmware. After the target restart, its wifi mac sequence number gets reset to zero. Hence AP to which our device is connected will receive frames with a wifi mac sequence number jump to the past, thereby resulting in the AP dropping all these frames, until the frame arrives with a wifi mac sequence number which AP was expecting. To avoid such frame drops, its better to trigger a station disconnect upon target hardware restart which can be done with API ieee80211_reconfig_disconnect exposed to mac80211. The other targets are not affected by this change, since the hardware params flag is not set. Reported-by: kernel test robot <lkp@intel.com> Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Signed-off-by: Youghandhar Chintala <quic_youghand@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221104085403.11025-1-quic_youghand@quicinc.com
2022-11-08wifi: Use kstrtobool() instead of strtobool()Christophe JAILLET3-3/+5
strtobool() is the same as kstrtobool(). However, the latter is more used within the kernel. In order to remove strtobool() and slightly simplify kstrtox.h, switch to the other function name. While at it, include the corresponding header file (<linux/kstrtox.h>) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/1ff34549af5ad6f7c80d5b9e11872b5499065fc1.1667336095.git.christophe.jaillet@wanadoo.fr
2022-11-03wifi: ath11k: Make QMI message rules constJeff Johnson1-36/+36
Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath11k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220915002303.12206-1-quic_jjohnson@quicinc.com
2022-11-03wifi: ath10k: Make QMI message rules constJeff Johnson3-115/+115
Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath10k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220915002612.13394-1-quic_jjohnson@quicinc.com
2022-11-02wifi: ath11k: avoid deadlock during regulatory update in ath11k_regd_update()Wen Gong1-5/+1
(cherry picked from commit d99884ad9e3673a12879bc2830f6e5a66cccbd78 in ath-next as users are seeing this bug more now, also cc stable) Running this test in a loop it is easy to reproduce an rtnl deadlock: iw reg set FI ifconfig wlan0 down What happens is that thread A (workqueue) tries to update the regulatory: try to acquire the rtnl_lock of ar->regd_update_work rtnl_lock+0x17/0x20 ath11k_regd_update+0x15a/0x260 [ath11k] ath11k_regd_update_work+0x15/0x20 [ath11k] process_one_work+0x228/0x670 worker_thread+0x4d/0x440 kthread+0x16d/0x1b0 ret_from_fork+0x22/0x30 And thread B (ifconfig) tries to stop the interface: try to cancel_work_sync(&ar->regd_update_work) in ath11k_mac_op_stop(). ifconfig 3109 [003] 2414.232506: probe: ath11k_mac_op_stop: (ffffffffc14187a0) drv_stop+0x30 ([mac80211]) ieee80211_do_stop+0x5d2 ([mac80211]) ieee80211_stop+0x3e ([mac80211]) __dev_close_many+0x9e ([kernel.kallsyms]) __dev_change_flags+0xbe ([kernel.kallsyms]) dev_change_flags+0x23 ([kernel.kallsyms]) devinet_ioctl+0x5e3 ([kernel.kallsyms]) inet_ioctl+0x197 ([kernel.kallsyms]) sock_do_ioctl+0x4d ([kernel.kallsyms]) sock_ioctl+0x264 ([kernel.kallsyms]) __x64_sys_ioctl+0x92 ([kernel.kallsyms]) do_syscall_64+0x3a ([kernel.kallsyms]) entry_SYSCALL_64_after_hwframe+0x63 ([kernel.kallsyms]) __GI___ioctl+0x7 (/lib/x86_64-linux-gnu/libc-2.23.so) The sequence of deadlock is: 1. Thread B calls rtnl_lock(). 2. Thread A starts to run and calls rtnl_lock() from within ath11k_regd_update_work(), then enters wait state because the lock is owned by thread B. 3. Thread B continues to run and tries to call cancel_work_sync(&ar->regd_update_work), but thread A is in ath11k_regd_update_work() waiting for rtnl_lock(). So cancel_work_sync() forever waits for ath11k_regd_update_work() to finish and we have a deadlock. Fix this by switching from using regulatory_set_wiphy_regd_sync() to regulatory_set_wiphy_regd(). Now cfg80211 will schedule another workqueue which handles the locking on it's own. So the ath11k workqueue can simply exit without taking any locks, avoiding the deadlock. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Cc: <stable@vger.kernel.org> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> [kvalo: improve commit log] Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-02wifi: ath11k: Fix QCN9074 firmware boot on x86Tyler J. Stachecki1-1/+1
The 2.7.0 series of QCN9074's firmware requests 5 segments of memory instead of 3 (as in the 2.5.0 series). The first segment (11M) is too large to be kalloc'd in one go on x86 and requires piecemeal 1MB allocations, as was the case with the prior public firmware (2.5.0, 15M). Since f6f92968e1e5, ath11k will break the memory requests, but only if there were fewer than 3 segments requested by the firmware. It seems that 5 segments works fine and allows QCN9074 to boot on x86 with firmware 2.7.0, so change things accordingly. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.16 Signed-off-by: Tyler J. Stachecki <stachecki.tyler@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221022042728.43015-1-stachecki.tyler@gmail.com
2022-11-02wifi: ath11k: synchronize ath11k_mac_he_gi_to_nl80211_he_gi()'s return typeJiri Slaby (SUSE)1-1/+1
ath11k_mac_he_gi_to_nl80211_he_gi() generates a valid warning with gcc-13: drivers/net/wireless/ath/ath11k/mac.c:321:20: error: conflicting types for 'ath11k_mac_he_gi_to_nl80211_he_gi' due to enum/integer mismatch; have 'enum nl80211_he_gi(u8)' drivers/net/wireless/ath/ath11k/mac.h:166:5: note: previous declaration of 'ath11k_mac_he_gi_to_nl80211_he_gi' with type 'u32(u8)' I.e. the type of the return value ath11k_mac_he_gi_to_nl80211_he_gi() in the declaration is u32, while the definition spells enum nl80211_he_gi. Synchronize them to the latter. Cc: Martin Liska <mliska@suse.cz> Cc: Kalle Valo <kvalo@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: ath11k@lists.infradead.org Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221031114341.10377-1-jirislaby@kernel.org
2022-11-02wifi: ath11k: Fix qmi_msg_handler data structure initializationRahul Bhattacharjee1-0/+3
qmi_msg_handler is required to be null terminated by QMI module. There might be a case where a handler for a msg id is not present in the handlers array which can lead to infinite loop while searching the handler and therefore out of bound access in qmi_invoke_handler(). Hence update the initialization in qmi_msg_handler data structure. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Signed-off-by: Rahul Bhattacharjee <quic_rbhattac@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221021090126.28626-1-quic_rbhattac@quicinc.com
2022-11-02wifi: ath9k: remove variable sentColin Ian King1-2/+0
Variable sent is just being incremented and it's never used anywhere else. The variable and the increment are redundant so remove it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221024153954.2168503-1-colin.i.king@gmail.com
2022-10-29Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo19-148/+269
ath.git patches for v6.2. Major changes: ath11k * support configuring channel dwell time during scan
2022-10-29Kalle Valo says:Jakub Kicinski6-0/+6
==================== pull-request: wireless-next-2022-10-28 First set of patches v6.2. mac80211 refactoring continues for Wi-Fi 7. All mac80211 driver are now converted to use internal TX queues, this might cause some regressions so we wanted to do this early in the cycle. Note: wireless tree was merged[1] to wireless-next to avoid some conflicts with mac80211 patches between the trees. Unfortunately there are still two smaller conflicts in net/mac80211/util.c which Stephen also reported[2]. In the first conflict initialise scratch_len to "params->scratch_len ?: 3 * params->len" (note number 3, not 2!) and in the second conflict take the version which uses elems->scratch_pos. [1] https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git/commit/?id=dfd2d876b3fda1790bc0239ba4c6967e25d16e91 [2] https://lore.kernel.org/all/20221020032340.5cf101c0@canb.auug.org.au/ mac80211 - preparation for Wi-Fi 7 Multi-Link Operation (MLO) continues - add API to show the link STAs in debugfs - all mac80211 drivers are now using mac80211 internal TX queues (iTXQs) rtw89 - support 8852BE rtl8xxxu - support RTL8188FU brmfmac - support two station interfaces concurrently bcma - support SPROM rev 11 ==================== Link: https://lore.kernel.org/r/20221028132943.304ECC433B5@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-28wifi: ath11k: fix monitor vdev creation with firmware recoveryNagarajan Maran1-0/+4
During firmware recovery, the monitor interface is not getting created in the driver and firmware since the respective flags are not updated properly. So after firmware recovery is successful, when monitor interface is brought down manually, firmware assertion is observed, since we are trying to bring down the interface which is not yet created in the firmware. Fix this by updating the monitor flags properly per phy#, during firmware recovery. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Nagarajan Maran <quic_nmaran@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221014155054.11471-1-quic_nmaran@quicinc.com
2022-10-19wifi: ath10k: Delay the unmapping of the bufferYoughandhar Chintala3-0/+27
On WCN3990, we are seeing a rare scenario where copy engine hardware is sending a copy complete interrupt to the host driver while still processing the buffer that the driver has sent, this is leading into an SMMU fault triggering kernel panic. This is happening on copy engine channel 3 (CE3) where the driver normally enqueues WMI commands to the firmware. Upon receiving a copy complete interrupt, host driver will immediately unmap and frees the buffer presuming that hardware has processed the buffer. In the issue case, upon receiving copy complete interrupt, host driver will unmap and free the buffer but since hardware is still accessing the buffer (which in this case got unmapped in parallel), SMMU hardware will trigger an SMMU fault resulting in a kernel panic. In order to avoid this, as a work around, add a delay before unmapping the copy engine source DMA buffer. This is conditionally done for WCN3990 and only for the CE3 channel where issue is seen. Below is the crash signature: wifi smmu error: kernel: [ 10.120965] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x7fdfd8ac0, fsynr=0x500003,cbfrsynra=0xc1, cb=6 arm-smmu 15000000.iommu: Unhandled context fault:fsr=0x402, iova=0x7fe06fdc0, fsynr=0x710003, cbfrsynra=0xc1, cb=6 qcom-q6v5-mss 4080000.remoteproc: fatal error received: err_qdi.c:1040:EF:wlan_process:0x1:WLAN RT:0x2091: cmnos_thread.c:3998:Asserted in copy_engine.c:AXI_ERROR_DETECTED:2149 remoteproc remoteproc0: crash detected in 4080000.remoteproc: type fatal error <3> remoteproc remoteproc0: handling crash #1 in 4080000.remoteproc pc : __arm_lpae_unmap+0x500/0x514 lr : __arm_lpae_unmap+0x4bc/0x514 sp : ffffffc011ffb530 x29: ffffffc011ffb590 x28: 0000000000000000 x27: 0000000000000000 x26: 0000000000000004 x25: 0000000000000003 x24: ffffffc011ffb890 x23: ffffffa762ef9be0 x22: ffffffa77244ef00 x21: 0000000000000009 x20: 00000007fff7c000 x19: 0000000000000003 x18: 0000000000000000 x17: 0000000000000004 x16: ffffffd7a357d9f0 x15: 0000000000000000 x14: 00fd5d4fa7ffffff x13: 000000000000000e x12: 0000000000000000 x11: 00000000ffffffff x10: 00000000fffffe00 x9 : 000000000000017c x8 : 000000000000000c x7 : 0000000000000000 x6 : ffffffa762ef9000 x5 : 0000000000000003 x4 : 0000000000000004 x3 : 0000000000001000 x2 : 00000007fff7c000 x1 : ffffffc011ffb890 x0 : 0000000000000000 Call trace: __arm_lpae_unmap+0x500/0x514 __arm_lpae_unmap+0x4bc/0x514 __arm_lpae_unmap+0x4bc/0x514 arm_lpae_unmap_pages+0x78/0xa4 arm_smmu_unmap_pages+0x78/0x104 __iommu_unmap+0xc8/0x1e4 iommu_unmap_fast+0x38/0x48 __iommu_dma_unmap+0x84/0x104 iommu_dma_free+0x34/0x50 dma_free_attrs+0xa4/0xd0 ath10k_htt_rx_free+0xc4/0xf4 [ath10k_core] ath10k_core_stop+0x64/0x7c [ath10k_core] ath10k_halt+0x11c/0x180 [ath10k_core] ath10k_stop+0x54/0x94 [ath10k_core] drv_stop+0x48/0x1c8 [mac80211] ieee80211_do_open+0x638/0x77c [mac80211] ieee80211_open+0x48/0x5c [mac80211] __dev_open+0xb4/0x174 __dev_change_flags+0xc4/0x1dc dev_change_flags+0x3c/0x7c devinet_ioctl+0x2b4/0x580 inet_ioctl+0xb0/0x1b4 sock_do_ioctl+0x4c/0x16c compat_ifreq_ioctl+0x1cc/0x35c compat_sock_ioctl+0x110/0x2ac __arm64_compat_sys_ioctl+0xf4/0x3e0 el0_svc_common+0xb4/0x17c el0_svc_compat_handler+0x2c/0x58 el0_svc_compat+0x8/0x2c Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1 Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Youghandhar Chintala <quic_youghand@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221012142733.32420-1-quic_youghand@quicinc.com
2022-10-13Merge tag 'net-6.1-rc1' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, and wifi. Current release - regressions: - Revert "net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs", it may cause crashes when the qdisc is reconfigured - inet: ping: fix splat due to packet allocation refactoring in inet - tcp: clean up kernel listener's reqsk in inet_twsk_purge(), fix UAF due to races when per-netns hash table is used Current release - new code bugs: - eth: adin1110: check in netdev_event that netdev belongs to driver - fixes for PTR_ERR() vs NULL bugs in driver code, from Dan and co. Previous releases - regressions: - ipv4: handle attempt to delete multipath route when fib_info contains an nh reference, avoid oob access - wifi: fix handful of bugs in the new Multi-BSSID code - wifi: mt76: fix rate reporting / throughput regression on mt7915 and newer, fix checksum offload - wifi: iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue (other cases) - wifi: mac80211: do not drop packets smaller than the LLC-SNAP header on fast-rx Previous releases - always broken: - ieee802154: don't warn zero-sized raw_sendmsg() - ipv6: ping: fix wrong checksum for large frames - mctp: prevent double key removal and unref - tcp/udp: fix memory leaks and races around IPV6_ADDRFORM - hv_netvsc: fix race between VF offering and VF association message Misc: - remove -Warray-bounds silencing in the drivers, compilers fixed" * tag 'net-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits) sunhme: fix an IS_ERR() vs NULL check in probe net: marvell: prestera: fix a couple NULL vs IS_ERR() checks kcm: avoid potential race in kcm_tx_work tcp: Clean up kernel listener's reqsk in inet_twsk_purge() net: phy: micrel: Fixes FIELD_GET assertion openvswitch: add nf_ct_is_confirmed check before assigning the helper tcp: Fix data races around icsk->icsk_af_ops. ipv6: Fix data races around sk->sk_prot. tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct(). udp: Call inet6_destroy_sock() in setsockopt(IPV6_ADDRFORM). tcp/udp: Fix memory leak in ipv6_renew_options(). mctp: prevent double key removal and unref selftests: netfilter: Fix nft_fib.sh for all.rp_filter=1 netfilter: rpfilter/fib: Populate flowic_l3mdev field selftests: netfilter: Test reverse path filtering net/mlx5: Make ASO poll CQ usable in atomic context tcp: cdg: allow tcp_cdg_release() to be called multiple times inet: ping: fix recent breakage ipv6: ping: fix wrong checksum for large frames net: ethernet: ti: am65-cpsw: set correct devlink flavour for unused ports ...
2022-10-13wifi: ath10k: Check return value of ath10k_get_arvif() in ↵Peter Kosyh1-0/+7
ath10k_wmi_event_tdls_peer() Return value of a function ath10k_get_arvif() is dereferenced without checking for null in ath10k_wmi_event_tdls_peer(), but it is usually checked for this function. Make ath10k_wmi_event_tdls_peer() do check retval of ath10k_get_arvif(). Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Peter Kosyh <pkosyh@yandex.ru> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221003091217.322598-1-pkosyh@yandex.ru
2022-10-13wifi: ath11k: Fix firmware crash on vdev delete race conditionSowmiya Sree Elavalagan1-23/+37
Current code does not wait for vdev delete completion on vdev create failures and tries to send another vdev create followed by vdev set param to firmware with same vdev id. This causes firmware crash. Fix this crash by waiting for vdev delete completion on vdev create failures. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.6.0.1-00905-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221011095346.3901-1-quic_ssreeela@quicinc.com
2022-10-12wifi: ath11k: Send PME message during wakeup from D3coldBaochen Qiang1-0/+3
We are seeing system stuck on some specific platforms due to WLAN chip fails to wakeup from D3cold state. With this flag, firmware will send PME message during wakeup and this issue is gone. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221010033237.415478-1-quic_bqiang@quicinc.com
2022-10-12wifi: ath11k: add support to configure channel dwell timeManikanta Pubbisetty1-4/+29
Add support to configure channel dwell time during scan. Dwell time help to stay on the channel for a specified duration during scan and aid userspace in finding WiFi networks. Very useful in passive scans where longer dwell times are needed to find the WiFi networks. Configure channel dwell time from duration of the scan request received from mac80211 when the duration is non-zero. When the scan request does not have duration value, use the default ones, the current implementation. Advertise corresponding feature flag NL80211_EXT_FEATURE_SET_SCAN_DWELL to enable the feature. Change is applicable for all ath11k hardware. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221007051130.6067-1-quic_mpubbise@quicinc.com
2022-10-12wifi: ath11k: suppress add interface errorKarthikeyan Periyasamy1-6/+3
In the VIF (other than monitor type) creation request, we should not throw the error code when the monitor VIF creation fails, since the actual VIF creation succeeds. If we throw the error code from driver then the actual VIF creation get fail. So suppress the monitor VIF creation error by throwing warning message instead of error code. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.6.0.1-00760-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221006005842.8599-1-quic_periyasa@quicinc.com
2022-10-12wifi: ath11k: fix firmware assert during bandwidth change for peer staAditya Kumar Singh2-37/+87
Currently, ath11k sends peer assoc command for each peer to firmware when bandwidth changes. Peer assoc command is a bulky command and if many clients are connected, this could lead to firmware buffer getting overflowed leading to a firmware assert. However, during bandwidth change, only phymode and bandwidth also can be updated by WMI set peer param command. This makes the overall command light when compared to peer assoc and for multi-client cases, firmware buffer overflow also does not occur. Remove sending peer assoc command during sta bandwidth change and instead add sending WMI set peer param command for phymode and bandwidth. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Fixes: f187fe8e3bc65 ("ath11k: fix firmware crash during channel switch") Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221005095430.19890-1-quic_adisi@quicinc.com
2022-10-12wifi: ar5523: Fix use-after-free on ar5523_cmd() timed outShigeru Yoshida1-0/+6
syzkaller reported use-after-free with the stack trace like below [1]: [ 38.960489][ C3] ================================================================== [ 38.963216][ C3] BUG: KASAN: use-after-free in ar5523_cmd_tx_cb+0x220/0x240 [ 38.964950][ C3] Read of size 8 at addr ffff888048e03450 by task swapper/3/0 [ 38.966363][ C3] [ 38.967053][ C3] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.0.0-09039-ga6afa4199d3d-dirty #18 [ 38.968464][ C3] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014 [ 38.969959][ C3] Call Trace: [ 38.970841][ C3] <IRQ> [ 38.971663][ C3] dump_stack_lvl+0xfc/0x174 [ 38.972620][ C3] print_report.cold+0x2c3/0x752 [ 38.973626][ C3] ? ar5523_cmd_tx_cb+0x220/0x240 [ 38.974644][ C3] kasan_report+0xb1/0x1d0 [ 38.975720][ C3] ? ar5523_cmd_tx_cb+0x220/0x240 [ 38.976831][ C3] ar5523_cmd_tx_cb+0x220/0x240 [ 38.978412][ C3] __usb_hcd_giveback_urb+0x353/0x5b0 [ 38.979755][ C3] usb_hcd_giveback_urb+0x385/0x430 [ 38.981266][ C3] dummy_timer+0x140c/0x34e0 [ 38.982925][ C3] ? notifier_call_chain+0xb5/0x1e0 [ 38.984761][ C3] ? rcu_read_lock_sched_held+0xb/0x60 [ 38.986242][ C3] ? lock_release+0x51c/0x790 [ 38.987323][ C3] ? _raw_read_unlock_irqrestore+0x37/0x70 [ 38.988483][ C3] ? __wake_up_common_lock+0xde/0x130 [ 38.989621][ C3] ? reacquire_held_locks+0x4a0/0x4a0 [ 38.990777][ C3] ? lock_acquire+0x472/0x550 [ 38.991919][ C3] ? rcu_read_lock_sched_held+0xb/0x60 [ 38.993138][ C3] ? lock_acquire+0x472/0x550 [ 38.994890][ C3] ? dummy_urb_enqueue+0x860/0x860 [ 38.996266][ C3] ? do_raw_spin_unlock+0x16f/0x230 [ 38.997670][ C3] ? dummy_urb_enqueue+0x860/0x860 [ 38.999116][ C3] call_timer_fn+0x1a0/0x6a0 [ 39.000668][ C3] ? add_timer_on+0x4a0/0x4a0 [ 39.002137][ C3] ? reacquire_held_locks+0x4a0/0x4a0 [ 39.003809][ C3] ? __next_timer_interrupt+0x226/0x2a0 [ 39.005509][ C3] __run_timers.part.0+0x69a/0xac0 [ 39.007025][ C3] ? dummy_urb_enqueue+0x860/0x860 [ 39.008716][ C3] ? call_timer_fn+0x6a0/0x6a0 [ 39.010254][ C3] ? cpuacct_percpu_seq_show+0x10/0x10 [ 39.011795][ C3] ? kvm_sched_clock_read+0x14/0x40 [ 39.013277][ C3] ? sched_clock_cpu+0x69/0x2b0 [ 39.014724][ C3] run_timer_softirq+0xb6/0x1d0 [ 39.016196][ C3] __do_softirq+0x1d2/0x9be [ 39.017616][ C3] __irq_exit_rcu+0xeb/0x190 [ 39.019004][ C3] irq_exit_rcu+0x5/0x20 [ 39.020361][ C3] sysvec_apic_timer_interrupt+0x8f/0xb0 [ 39.021965][ C3] </IRQ> [ 39.023237][ C3] <TASK> In ar5523_probe(), ar5523_host_available() calls ar5523_cmd() as below (there are other functions which finally call ar5523_cmd()): ar5523_probe() -> ar5523_host_available() -> ar5523_cmd_read() -> ar5523_cmd() If ar5523_cmd() timed out, then ar5523_host_available() failed and ar5523_probe() freed the device structure. So, ar5523_cmd_tx_cb() might touch the freed structure. This patch fixes this issue by canceling in-flight tx cmd if submitted urb timed out. Link: https://syzkaller.appspot.com/bug?id=9e12b2d54300842b71bdd18b54971385ff0d0d3a [1] Reported-by: syzbot+95001b1fd6dfcc716c29@syzkaller.appspotmail.com Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221009183223.420015-1-syoshida@redhat.com
2022-10-12wifi: carl9170: Remove -Warray-bounds exceptionKees Cook1-5/+0
GCC-12 emits false positive -Warray-bounds warnings with CONFIG_UBSAN_SHIFT (-fsanitize=shift). This is fixed in GCC 13[1], and there is top-level Makefile logic to remove -Warray-bounds for known-bad GCC versions staring with commit f0be87c42cbd ("gcc-12: disable '-Warray-bounds' universally for now"). Remove the local work-around. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105679 Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221006192051.1742930-1-keescook@chromium.org
2022-10-11wifi: ath11k: mac: fix reading 16 bytes from a region of size 0 warningKalle Valo1-2/+3
Linaro reported stringop-overread warnings in ath11k (this is one of many): drivers/net/wireless/ath/ath11k/mac.c:2238:29: error: 'ath11k_peer_assoc_h_he_limit' reading 16 bytes from a region of size 0 [-Werror=stringop-overread] My further investigation showed that these warnings happen on GCC 11.3 but not with GCC 12.2, and with only the kernel config Linaro provided: https://builds.tuxbuild.com/2F4W7nZHNx3T88RB0gaCZ9hBX6c/config I saw the same warnings both with arm64 and x86_64 builds and KASAN seems to be the reason triggering these warnings with GCC 11. Nobody else has reported this so this seems to be quite rare corner case. I don't know what specific commit started emitting this warning so I can't provide a Fixes tag. The function hasn't been touched for a year. I decided to workaround this by converting the pointer to a new array in stack, and then copying the data to the new array. It's only 16 bytes anyway and this is executed during association, so not in a hotpath. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9 Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Link: https://lore.kernel.org/all/CA+G9fYsZ_qypa=jHY_dJ=tqX4515+qrV9n2SWXVDHve826nF7Q@mail.gmail.com/ Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221010160638.20152-1-kvalo@kernel.org
2022-10-11wifi: ath9k: verify the expected usb_endpoints are presentFedor Pchelkin1-0/+14
The bug arises when a USB device claims to be an ATH9K but doesn't have the expected endpoints. (In this case there was an interrupt endpoint where the driver expected a bulk endpoint.) The kernel needs to be able to handle such devices without getting an internal error. usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 3 PID: 500 at drivers/usb/core/urb.c:493 usb_submit_urb+0xce2/0x1430 drivers/usb/core/urb.c:493 Modules linked in: CPU: 3 PID: 500 Comm: kworker/3:2 Not tainted 5.10.135-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Workqueue: events request_firmware_work_func RIP: 0010:usb_submit_urb+0xce2/0x1430 drivers/usb/core/urb.c:493 Call Trace: ath9k_hif_usb_alloc_rx_urbs drivers/net/wireless/ath/ath9k/hif_usb.c:908 [inline] ath9k_hif_usb_alloc_urbs+0x75e/0x1010 drivers/net/wireless/ath/ath9k/hif_usb.c:1019 ath9k_hif_usb_dev_init drivers/net/wireless/ath/ath9k/hif_usb.c:1109 [inline] ath9k_hif_usb_firmware_cb+0x142/0x530 drivers/net/wireless/ath/ath9k/hif_usb.c:1242 request_firmware_work_func+0x12e/0x240 drivers/base/firmware_loader/main.c:1097 process_one_work+0x9af/0x1600 kernel/workqueue.c:2279 worker_thread+0x61d/0x12f0 kernel/workqueue.c:2425 kthread+0x3b4/0x4a0 kernel/kthread.c:313 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:299 Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221008211532.74583-1-pchelkin@ispras.ru
2022-10-11wifi: ath9k: hif_usb: Fix use-after-free in ath9k_hif_usb_reg_in_cb()Fedor Pchelkin1-13/+15
It is possible that skb is freed in ath9k_htc_rx_msg(), then usb_submit_urb() fails and we try to free skb again. It causes use-after-free bug. Moreover, if alloc_skb() fails, urb->context becomes NULL but rx_buf is not freed and there can be a memory leak. The patch removes unnecessary nskb and makes skb processing more clear: it is supposed that ath9k_htc_rx_msg() either frees old skb or passes its managing to another callback function. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 3deff76095c4 ("ath9k_htc: Increase URB count for REG_IN pipe") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221008114917.21404-1-pchelkin@ispras.ru
2022-10-11wifi: ath9k: Remove -Warray-bounds exceptionKees Cook1-5/+0
GCC-12 emits false positive -Warray-bounds warnings with CONFIG_UBSAN_SHIFT (-fsanitize=shift). This is fixed in GCC 13[1], and there is top-level Makefile logic to remove -Warray-bounds for known-bad GCC versions staring with commit f0be87c42cbd ("gcc-12: disable '-Warray-bounds' universally for now"). Remove the local work-around. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105679 Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221006192054.1742982-1-keescook@chromium.org
2022-10-11wifi: ath9k: hif_usb: fix memory leak of urbs in ath9k_hif_usb_dealloc_tx_urbs()Fedor Pchelkin1-4/+0
Syzkaller reports a long-known leak of urbs in ath9k_hif_usb_dealloc_tx_urbs(). The cause of the leak is that usb_get_urb() is called but usb_free_urb() (or usb_put_urb()) is not called inside usb_kill_urb() as urb->dev or urb->ep fields have not been initialized and usb_kill_urb() returns immediately. The patch removes trying to kill urbs located in hif_dev->tx.tx_buf because hif_dev->tx.tx_buf is not supposed to contain urbs which are in pending state (the pending urbs are stored in hif_dev->tx.tx_pending). The tx.tx_lock is acquired so there should not be any changes in the list. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 03fb92a432ea ("ath9k: hif_usb: fix race condition between usb_get_urb() and usb_kill_anchored_urbs()") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220725151359.283704-1-pchelkin@ispras.ru
2022-10-10Merge tag 'v6.1-p1' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Feed untrusted RNGs into /dev/random - Allow HWRNG sleeping to be more interruptible - Create lib/utils module - Setting private keys no longer required for akcipher - Remove tcrypt mode=1000 - Reorganised Kconfig entries Algorithms: - Load x86/sha512 based on CPU features - Add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher Drivers: - Add HACE crypto driver aspeed" * tag 'v6.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits) crypto: aspeed - Remove redundant dev_err call crypto: scatterwalk - Remove unused inline function scatterwalk_aligned() crypto: aead - Remove unused inline functions from aead crypto: bcm - Simplify obtain the name for cipher crypto: marvell/octeontx - use sysfs_emit() to instead of scnprintf() hwrng: core - start hwrng kthread also for untrusted sources crypto: zip - remove the unneeded result variable crypto: qat - add limit to linked list parsing crypto: octeontx2 - Remove the unneeded result variable crypto: ccp - Remove the unneeded result variable crypto: aspeed - Fix check for platform_get_irq() errors crypto: virtio - fix memory-leak crypto: cavium - prevent integer overflow loading firmware crypto: marvell/octeontx - prevent integer overflows crypto: aspeed - fix build error when only CRYPTO_DEV_ASPEED is enabled crypto: hisilicon/qm - fix the qos value initialization crypto: sun4i-ss - use DEFINE_SHOW_ATTRIBUTE to simplify sun4i_ss_debugfs crypto: tcrypt - add async speed test for aria cipher crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher crypto: aria - prepare generic module for optimized implementations ...
2022-10-10wifi: ath9k: Make arrays prof_prio and channelmap static constColin Ian King1-2/+6
Don't populate the read-only arrays prof_prio and channelmap on the stack but instead make them static const. Also makes the object code a little smaller. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221005155558.320556-1-colin.i.king@gmail.com
2022-10-10wifi: ath11k: Fix spelling mistake "chnange" -> "change"Colin Ian King1-1/+1
There is a spelling mistake in an ath11k_dbg debug message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220928143834.35189-1-colin.i.king@gmail.com
2022-10-10wifi: ath11k: avoid deadlock during regulatory update in ath11k_regd_update()Wen Gong1-5/+1
Running this test in a loop it is easy to reproduce an rtnl deadlock: iw reg set FI ifconfig wlan0 down What happens is that thread A (workqueue) tries to update the regulatory: try to acquire the rtnl_lock of ar->regd_update_work rtnl_lock+0x17/0x20 ath11k_regd_update+0x15a/0x260 [ath11k] ath11k_regd_update_work+0x15/0x20 [ath11k] process_one_work+0x228/0x670 worker_thread+0x4d/0x440 kthread+0x16d/0x1b0 ret_from_fork+0x22/0x30 And thread B (ifconfig) tries to stop the interface: try to cancel_work_sync(&ar->regd_update_work) in ath11k_mac_op_stop(). ifconfig 3109 [003] 2414.232506: probe: ath11k_mac_op_stop: (ffffffffc14187a0) drv_stop+0x30 ([mac80211]) ieee80211_do_stop+0x5d2 ([mac80211]) ieee80211_stop+0x3e ([mac80211]) __dev_close_many+0x9e ([kernel.kallsyms]) __dev_change_flags+0xbe ([kernel.kallsyms]) dev_change_flags+0x23 ([kernel.kallsyms]) devinet_ioctl+0x5e3 ([kernel.kallsyms]) inet_ioctl+0x197 ([kernel.kallsyms]) sock_do_ioctl+0x4d ([kernel.kallsyms]) sock_ioctl+0x264 ([kernel.kallsyms]) __x64_sys_ioctl+0x92 ([kernel.kallsyms]) do_syscall_64+0x3a ([kernel.kallsyms]) entry_SYSCALL_64_after_hwframe+0x63 ([kernel.kallsyms]) __GI___ioctl+0x7 (/lib/x86_64-linux-gnu/libc-2.23.so) The sequence of deadlock is: 1. Thread B calls rtnl_lock(). 2. Thread A starts to run and calls rtnl_lock() from within ath11k_regd_update_work(), then enters wait state because the lock is owned by thread B. 3. Thread B continues to run and tries to call cancel_work_sync(&ar->regd_update_work), but thread A is in ath11k_regd_update_work() waiting for rtnl_lock(). So cancel_work_sync() forever waits for ath11k_regd_update_work() to finish and we have a deadlock. Fix this by switching from using regulatory_set_wiphy_regd_sync() to regulatory_set_wiphy_regd(). Now cfg80211 will schedule another workqueue which handles the locking on it's own. So the ath11k workqueue can simply exit without taking any locks, avoiding the deadlock. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> [kvalo: improve commit log] Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221006151747.13757-1-kvalo@kernel.org
2022-10-10wifi: mac80211: add wake_tx_queue callback to driversAlexander Wetzel6-0/+6
mac80211 is fully switching over to the internal TX queue (iTXQ) implementation. Update all drivers not yet providing the now mandatory wake_tx_queue() callback. As an side effect the netdev interfaces of all updated drivers will switch to the noqueue qdisc. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> [add staging drivers] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-30Merge tag 'wireless-next-2022-09-30' of ↵Jakub Kicinski67-377/+1758
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.1 Few stack changes and lots of driver changes in this round. brcmfmac has more activity as usual and it gets new hardware support. ath11k improves WCN6750 support and also other smaller features. And of course changes all over. Note: in early September wireless tree was merged to wireless-next to avoid some conflicts with mac80211 patches, this shouldn't cause any problems but wanted to mention anyway. Major changes: mac80211 - refactoring and preparation for Wi-Fi 7 Multi-Link Operation (MLO) feature continues brcmfmac - support CYW43439 SDIO chipset - support BCM4378 on Apple platforms - support CYW89459 PCIe chipset rtw89 - more work to get rtw8852c supported - P2P support - support for enabling and disabling MSDU aggregation via nl80211 mt76 - tx status reporting improvements ath11k - cold boot calibration support on WCN6750 - Target Wake Time (TWT) debugfs support for STA interface - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - implement SRAM dump debugfs interface - enable threaded NAPI on all hardware - WoW support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz wcn36xx - add SNR from a received frame as a source of system entropy * tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (231 commits) wifi: rtl8xxxu: Improve rtl8xxxu_queue_select wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM wifi: rtl8xxxu: gen2: Enable 40 MHz channel width wifi: rtw89: 8852b: configure DLE mem wifi: rtw89: check DLE FIFO size with reserved size wifi: rtw89: mac: correct register of report IMR wifi: rtw89: pci: set power cut closed for 8852be wifi: rtw89: pci: add to do PCI auto calibration wifi: rtw89: 8852b: implement chip_ops::{enable,disable}_bb_rf wifi: rtw89: add DMA busy checking bits to chip info wifi: rtw89: mac: define DMA channel mask to avoid unsupported channels wifi: rtw89: pci: mask out unsupported TX channels iwlegacy: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper ipw2x00: Replace zero-length array with DECLARE_FLEX_ARRAY() helper wifi: iwlwifi: Track scan_cmd allocation size explicitly brcmfmac: Remove the call to "dtim_assoc" IOVAR brcmfmac: increase dcmd maximum buffer size brcmfmac: Support 89459 pcie brcmfmac: increase default max WOWL patterns to 16 cw1200: fix incorrect check to determine if no element is found in list ... ==================== Link: https://lore.kernel.org/r/20220930150413.A7984C433D6@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-30wifi: ath11k: fix warning in dma_free_coherent() of memory chunks while recoveryWen Gong1-3/+3
Commit 26f3a021b37c ("ath11k: allocate smaller chunks of memory for firmware") and commit f6f92968e1e5 ("ath11k: qmi: try to allocate a big block of DMA memory first") change ath11k to allocate the memory chunks for target twice while wlan load. It fails for the 1st time because of large memory and then changed to allocate many small chunks for the 2nd time sometimes as below log. 1st time failed: [10411.640620] ath11k_pci 0000:05:00.0: qmi firmware request memory request [10411.640625] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 6881280 [10411.640630] ath11k_pci 0000:05:00.0: qmi mem seg type 4 size 3784704 [10411.640658] ath11k_pci 0000:05:00.0: qmi dma allocation failed (6881280 B type 1), will try later with small size [10411.640671] ath11k_pci 0000:05:00.0: qmi delays mem_request 2 [10411.640677] ath11k_pci 0000:05:00.0: qmi respond memory request delayed 1 2nd time success: [10411.642004] ath11k_pci 0000:05:00.0: qmi firmware request memory request [10411.642008] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288 [10411.642012] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288 [10411.642014] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288 [10411.642016] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288 [10411.642018] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288 [10411.642020] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288 [10411.642022] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288 [10411.642024] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288 [10411.642027] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288 [10411.642029] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288 [10411.642031] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 458752 [10411.642033] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 131072 [10411.642035] ath11k_pci 0000:05:00.0: qmi mem seg type 4 size 524288 [10411.642037] ath11k_pci 0000:05:00.0: qmi mem seg type 4 size 524288 [10411.642039] ath11k_pci 0000:05:00.0: qmi mem seg type 4 size 524288 [10411.642041] ath11k_pci 0000:05:00.0: qmi mem seg type 4 size 524288 [10411.642043] ath11k_pci 0000:05:00.0: qmi mem seg type 4 size 524288 [10411.642045] ath11k_pci 0000:05:00.0: qmi mem seg type 4 size 524288 [10411.642047] ath11k_pci 0000:05:00.0: qmi mem seg type 4 size 491520 [10411.642049] ath11k_pci 0000:05:00.0: qmi mem seg type 1 size 524288 And then commit 5962f370ce41 ("ath11k: Reuse the available memory after firmware reload") skip the ath11k_qmi_free_resource() which frees the memory chunks while recovery, after that, when run recovery test on WCN6855, a warning happened every time as below and finally leads fail for recovery. [ 159.570318] BUG: Bad page state in process kworker/u16:5 pfn:33300 [ 159.570320] page:0000000096ffdbb9 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x33300 [ 159.570324] flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff) [ 159.570329] raw: 000fffffc0000000 0000000000000000 dead000000000122 0000000000000000 [ 159.570332] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 159.570334] page dumped because: nonzero _refcount [ 159.570440] firewire_ohci syscopyarea sysfillrect psmouse sdhci_pci ahci sysimgblt firewire_core fb_sys_fops libahci crc_itu_t cqhci drm sdhci e1000e wmi video [ 159.570460] CPU: 2 PID: 217 Comm: kworker/u16:5 Kdump: loaded Tainted: G B 5.19.0-rc1-wt-ath+ #3 [ 159.570465] Hardware name: LENOVO 418065C/418065C, BIOS 83ET63WW (1.33 ) 07/29/2011 [ 159.570467] Workqueue: qmi_msg_handler qmi_data_ready_work [qmi_helpers] [ 159.570475] Call Trace: [ 159.570476] <TASK> [ 159.570478] dump_stack_lvl+0x49/0x5f [ 159.570486] dump_stack+0x10/0x12 [ 159.570493] bad_page+0xab/0xf0 [ 159.570502] check_free_page_bad+0x66/0x70 [ 159.570511] __free_pages_ok+0x530/0x9a0 [ 159.570517] ? __dev_printk+0x58/0x6b [ 159.570525] ? _dev_printk+0x56/0x72 [ 159.570534] ? qmi_decode+0x119/0x470 [qmi_helpers] [ 159.570543] __free_pages+0x91/0xd0 [ 159.570548] dma_free_contiguous+0x50/0x60 [ 159.570556] dma_direct_free+0xe5/0x140 [ 159.570564] dma_free_attrs+0x35/0x50 [ 159.570570] ath11k_qmi_msg_mem_request_cb+0x2ae/0x3c0 [ath11k] [ 159.570620] qmi_invoke_handler+0xac/0xe0 [qmi_helpers] [ 159.570630] qmi_handle_message+0x6d/0x180 [qmi_helpers] [ 159.570643] qmi_data_ready_work+0x2ca/0x440 [qmi_helpers] [ 159.570656] process_one_work+0x227/0x440 [ 159.570667] worker_thread+0x31/0x3d0 [ 159.570676] ? process_one_work+0x440/0x440 [ 159.570685] kthread+0xfe/0x130 [ 159.570692] ? kthread_complete_and_exit+0x20/0x20 [ 159.570701] ret_from_fork+0x22/0x30 [ 159.570712] </TASK> The reason is because when wlan start to recovery, the type, size and count is not same for the 1st and 2nd QMI_WLFW_REQUEST_MEM_IND message, Then it leads the parameter size is not correct for the dma_free_coherent(). For the chunk[1], the actual dma size is 524288 which allocate in the 2nd time of the initial wlan load phase, and the size which pass to dma_free_coherent() is 3784704 which is got in the 1st time of recovery phase, then warning above happened. Change to use prev_size of struct target_mem_chunk for the paramter of dma_free_coherent() since prev_size is the real size of last load/recovery. Also change to check both type and size of struct target_mem_chunk to reuse the memory to avoid mismatch buffer size for target. Then the warning disappear and recovery success. When the 1st QMI_WLFW_REQUEST_MEM_IND for recovery arrived, the trunk[0] is freed in ath11k_qmi_alloc_target_mem_chunk() and then dma_alloc_coherent() failed caused by large size, and then trunk[1] is freed in ath11k_qmi_free_target_mem_chunk(), the left 18 trunks will be reuse for the 2nd QMI_WLFW_REQUEST_MEM_IND message. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Fixes: 5962f370ce41 ("ath11k: Reuse the available memory after firmware reload") Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220928073832.16251-1-quic_wgong@quicinc.com
2022-09-30wifi: ath11k: Don't exit on wakeup failureBaochen Qiang1-3/+10
Currently, ath11k_pcic_read() returns an error if wakeup() fails, this makes firmware crash debug quite hard because we can get nothing. Change to go ahead on wakeup failure, in that case we still may get something valid to check. There should be no mislead due to incorrect content because we are aware of the failure with the log printed. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220928015140.5431-1-quic_bqiang@quicinc.com
2022-09-30carl9170: Replace zero-length array with DECLARE_FLEX_ARRAY() helperGustavo A. R. Silva1-1/+1
Zero-length arrays are deprecated and we are moving towards adopting C99 flexible-array members, instead. So, replace zero-length arrays declarations in anonymous union with the new DECLARE_FLEX_ARRAY() helper macro. This helper allows for flexible-array members in unions. Link: https://github.com/KSPP/linux/issues/193 Link: https://github.com/KSPP/linux/issues/215 Link: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/YzIdWc8QSdZFHBYg@work
2022-09-29net: drop the weight argument from netif_napi_addJakub Kicinski7-14/+8
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28wifi: ath10k: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helperGustavo A. R. Silva1-2/+4
Zero-length arrays are deprecated and we are moving towards adopting C99 flexible-array members, instead. So, replace zero-length arrays declarations in anonymous union with the new DECLARE_FLEX_ARRAY() helper macro. This helper allows for flexible-array members in unions. Link: https://github.com/KSPP/linux/issues/193 Link: https://github.com/KSPP/linux/issues/212 Link: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/YzIcoloIQBDqGlgc@work
2022-09-28wifi: wil6210: debugfs: use DEFINE_SHOW_ATTRIBUTE to simplify ↵Liu Shixin1-30/+6
fw_capabilities/fw_version Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. No functional change. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220922142858.3250469-1-liushixin2@huawei.com
2022-09-28wifi: ath11k: stop tx queues immediately upon firmware exitAditya Kumar Singh3-4/+5
Currently, recovery flag is set immediately upon firmware exit but tx queues are stopped once firmware arrives back and is ready which is during ath11k_core_restart. Once ieee80211 hw restart is completed, tx queues are resumed. If during the time delta between firmware exit and firmware ready, mac80211 send packets, currently ath11k will drop it since recovery flag will be set. But warning prints will come - "ath11k c000000.wifi: failed to transmit frame -108" If more tx packets are there, this could lead to flooding of above print. However, actually tx queues should be stopped immediately when firmware leaves. This will prevent packets to get dropped when firmware is recovering. Add fix to stop tx queues immediately after firmware exit. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220923170235.18873-1-quic_adisi@quicinc.com
2022-09-27Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo65-369/+1750
ath.git patches for v6.1. Major changes: ath11k * cold boot calibration support on WCN6750 * Target Wake Time (TWT) debugfs support for STA interface * support to connect to a non-transmit MBSSID AP profile * enable remain-on-channel support on WCN6750 * implement SRAM dump debugfs interface * enable threaded NAPI on all hardware * WoW support for WCN6750 * support to provide transmit power from firmware via nl80211 * support to get power save duration for each client * spectral scan support for 160 MHz wcn36xx * add SNR from a received frame as a source of system entropy
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-08 17:04:05 +0300