summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/fw/api/datapath.h
AgeCommit message (Collapse)AuthorFilesLines
2024-05-06wifi: iwlwifi: mvm: consider FWs recommendation for EMLSRMiri Korenblit1-0/+7
FW sends a notification indicating whether activating EMLSR mode is recommended or not. Support the notification and enter EMLSR only if recommended. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.2fd3387882eb.I7a8a5b24658744ed732bfc03b1872c9298483d62@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02iwlwifi: fw: fix more kernel-doc warningsEmmanuel Grumbach1-1/+1
Fix some more kernel-doc warnings in FW API definitions. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://msgid.link/20240131213817.9f30c6529216.I69e98612c6c81cf1b7bd480d8041b5d3e25610d3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-06wifi: iwlwifi: api: fix kernel-doc linksJohannes Berg1-2/+4
Some of the kernel-doc links are outdated due to other changes, fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230601171633.85e2cf489893.Ie3889ea6f755b80c988543ccca56c67420c51b1f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-22wifi: iwlwifi: mvm: report hardware timestamps in RX/TX statusAvraham Stern1-0/+135
For TM/FTM frames, report the hardware timestamps reported by the fw as part of the RX/TX status. Since the fw reports the timestamps in a dedicated notification (and not as part of the RX/TX status), hold the frame until the fw timestamps notification is received. Timestamping is enabled when a station is connected and disabled when disconnected. For AP interface, only the first station will have timestamping enabled since the fw only supports timestamping for one peer. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230320122330.e0392d498101.I9bf12c8ecfb3f17253a13dc48a48647ddd6e7855@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-22wifi: iwlwifi: mvm: read synced time from firmware if supportedAvraham Stern1-1/+48
If the firmware supports reading synced GP2/ATRB timestamps, read the synced timestamps from firmware instead of reading the GP2 register and the system time separately. Reading the synced time from firmware should be more accurate. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230320122330.a6be5f0b5580.Idedb496a5943fa496143066ffbed08185a8c4582@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-30wifi: iwlwifi: rx: add sniffer support for EHT modeMordechay Goodstein1-1/+1
Start by adding a parsing option for all the new fields coming from FW and checking that we have the right version for parsing EHT. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Link: https://lore.kernel.org/r/20230127002430.ba9b364fbacf.I469af2a07b3ff51cbd8d67e572478f4c56ce22ba@changeid Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
2022-12-07wifi: iwlwifi: modify new queue allocation commandJohannes Berg1-6/+10
Follow a new firmware API changes and update the queue allocation command in the remove/modify cases to take the station mask and TID instead of the queue ID. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221205102808.2925b38d3929.Ib8467711590c1969817c3321509eb131f4230e15@changeid
2022-11-10wifi: iwlwifi: mvm: support new key APIJohannes Berg1-0/+79
In order to support MLD, the key API is also changing to have station masks instead of just the station ID etc. Change the driver to support this, and add the new code in a new file so it's more clearly separated. For now this isn't separated at the mac80211 ops level, which we wanted to do, but we're calling these functions in a place when pre-start keys are installed in iwl_mvm_start_ap_ibss(), and the function has some glue logic to mac80211. We may want to change that later. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221102165239.ed9ccd814abc.Iacc7360de68807fbac19e5b67c86504b39cc15df@changeid
2022-02-18iwlwifi: mvm: update BAID allocation command againJohannes Berg1-9/+22
Due to some issues found in integration, the command now has the (old) station mask and TID in modify/remove instead of the BAID, adjust accordingly. Since we don't use modify yet (and never will with v1 of the API), just add v1 remove inside the existing union, and use that, this way we don't have to duplicate everything, only the remove code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220210181930.bc424f15cc4b.I06d9acae11dc69b2500666f497017a3fd4e2acd5@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: support new queue allocation commandJohannes Berg1-0/+56
Newer firmware versions will support a new queue allocation command, in order to deal with MLD where multiple stations are used for a single queue. Add support for the new command. This requires some refactoring of the queue allocation API, which now gets - the station mask instead of the station ID - the flags without the "enable" flag, since that's no longer used in the new API Additionally, this new API now requires that we remove queues before removing a station, the firmware will no longer do that internally. Also add support for that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220210181930.acbf22ac2b66.I2bf38578c5ca1f7ffb2011a782f772db92fc4965@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: tlc: Add logs in rs_fw_rate_init func to print TLC configurationAbhishek Naik1-1/+1
Add logs in rs_fw_rate_init function. It helps in verifying TLC Configuration while debuging TLC related bugs. Update kernel doc for TLC_MNG_CONFIG_CMD with correct version of struct iwl_tlc_config_cmd. Signed-off-by: Abhishek Naik <abhishek.naik@intel.com> Fixes: ae4c1bb06b66 ("iwlwifi: rs: add support for TLC config command ver 4") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220210181930.1fd6adfb6f1e.Icc8f5fd517735fcc10db098999ff1272da291298@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: mvm: starting from 22000 we have 32 Rx AMPDU sessionsEmmanuel Grumbach1-0/+3
Those devices have more BAIDs, which is the hardware module that tracks the BA session. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220128153014.7120a90ed7d2.I9d6d907a2c1b965d1e42ff9f0886b1df627e4761@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: mvm: support new BAID allocation commandJohannes Berg1-0/+74
Due to some rearchitecting inside the firmware, a new BAID allocation command is being introduced. Support it. Note that with it the firmware no longer returns "no space" but will crash instead, so check for that before sending the command to the firmware. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220128153014.a89fa3bd9d91.Ibe58c5d9e882dad43aa857aa1c8f54f3358c667b@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: mvm: support RLC configuration commandJohannes Berg1-0/+62
There's an RLC configuration command in the firmware that's going to replace the chain information in the PHY context. Add support for this command, while leaving the PHY context fields unset when we know the RLC command will be used. Also add support to send only the RLC configuration command if only the # of chains used on the PHY context changes. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204083238.55faa3782bb0.I3f9d0071e680cab513c59b093d0827af99d41c51@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-06-22iwlwifi: mvm: honour firmware SMPS requestsJohannes Berg1-0/+26
The firmware can now request SMPS (due to thermal conditions), add some code to honour such requests and bubble them up through the stack, subject to our other SMPS constraints, e.g. from Bluetooth. Then, if the firmware requests SMPS, then we know that it supports a small extension to the PHY configuration API where a chain mask of 0 means "use 1 but pick which one yourself", so in this case we use that extension. During firmware restart, we stay in the previous state, and the FW will send us a notification at startup (only) if the temperature is below the lower or above the high threshold, to sync the state. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210617100544.85656b7684b9.I7a661a0758d070a750d3a91874d1a0f5fab9febc@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-05iwlwifi: mvm: handle CCA-EXT delay firmware notificationJohannes Berg1-1/+17
If there are frequent CCA delays due to the extension channel as detected by the firmware, and we're on 2.4 GHz, then handle this by disconnecting (with a reconnect hint). When we disconnect, we'll also update our capabilities to use only 20 MHz on the next connection (if it's on 2.4 GHz) as to avoid the use of the extension channel that has too much noise. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210117130510.4de9c363b0b5.I709b7e6f73a7537c53f22d7418927691259de8a8@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: use SPDX tagsJohannes Berg1-64/+6
Use SPDX tags instead of the long copyright notices. Also cleanup some duplicate copyright notices and combine the years where possible. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201210000603.481bcb512a6f.I8146abe5a637079e7336209f23cb26af98b12b31@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-29iwlwifi: mvm: implement CSI reportingJohannes Berg1-0/+55
Implement CSI (channel estimation matrix) reporting in the mvm driver, if the firmware has the capability. Currently only a debugfs API is provided as the API is still under discussion. For now, RX aggregation must be disabled to use this feature on data frames as we haven't found a good way to attach the data to A-MPDUs, given complexities with multi-queue. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-20iwlwifi: mvm: handle RX no data notificationShaul Triebitz1-0/+5
Handle RX no data notification, which is used for advertising NDP to radiotap. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-28iwlwifi: mvm: enable sending HE_AIR_SNIFFER command via debugfsShaul Triebitz1-0/+5
In order to receive TB (Trigger Based) PPDU in monitor mode, the Driver must send the HE_AIR_SNIFFER_CONFIG_CMD host command. Enable that via debugfs. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-02iwlwifi: mvm: configure multi RX queueSara Sharon1-0/+7
Currently multi-queue is disabled for 22000 devices. This was since driver isn't supposed to write to prph registers anymore, and FW needs to configure the RFH. Now that FW added support for the API - use it and remove the 22000 multi RX queue disablement. Bump min API version to avoid compatibility issues. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-07-26iwlwifi: fw: add FW APIs for HELuca Coelho1-0/+5
Add the FW API definitions for HE support. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: update rs-fw APINaftali Goldstein1-10/+0
Update rs-fw API to match changes in FW. Specifically, the TLC_MNG_NOTIF_REQ_CMD command and TLC_MNG_AMSDU_ENABLE_NOTIF notification are removed, the A-MSDU related info is received from FW via the TLC_MNG_UPDATE_NOTIF, and the TLC_MNG_CONFIG_CMD uses version 2 of its data structure. Additionally, constify some arguments in a couple of functions. Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: support offload of AMSDU rate controlGregory Greenman1-0/+5
Support the new APIs and activate AMSDU based on the offloaded TLC decisions. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-05iwlwifi: mvm: rs: new rate scale API - add FW notificationsGregory Greenman1-0/+10
This patch sends to the FW notification configuration command and handles the update responses. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-05iwlwifi: mvm: rs: add basic implementation of the new RS API handlersGregory Greenman1-0/+5
This patch adds rate scaling configuration command and implements a few other handlers. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-01iwlwifi: reorganize firmware APIJohannes Berg1-0/+127
Apart from DVM, all firmware uses the same base API, and there's code outside iwlmvm that needs to interact with it. Reflect this in the source better and reorganize the firmware API to a new fw/api/ directory. While at it, split the already pretty large fw-api.h file into a number of smaller files, going from almost 3k lines in there to a maximum number of lines less than 1k. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-01 11:02:28 +0300