summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c
AgeCommit message (Collapse)AuthorFilesLines
2024-05-06wifi: iwlwifi: mvm: use already determined cmd_idJohannes Berg1-7/+2
In iwl_mvm_rs_fw_rate_init() we have a variable cmd_id that holds the command ID, so we can just use that instead of the various calculations of it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.f894ede03b26.I18f03c272b1c0807767f2713f3ffbb2941c57d9b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-12wifi: iwlwifi: mvm: work around A-MSDU size problemJohannes Berg1-2/+8
The firmware will now start with 1500 byte A-MSDU size rather than 3500 as before, and that seems to cause some really hard to debug problems. Keep A-MSDU disabled if the size is less than 2000 to disable this for now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240208185302.3dcd0a1767d0.I450d35f3085b3b04a96dd1e1e7d8c27bda9ce8f5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: mac80211: introduce 'channel request'Johannes Berg1-3/+3
For channel contexts, mac80211 currently uses the cfg80211 chandef struct (control channel, center freq(s), width) to define towards drivers and internally how these behave. In fact, there are _two_ such structs used, where the min_def can reduce bandwidth according to the stations connected. Unfortunately, with EHT this is longer be sufficient, at least not for all hardware. EHT requires that non-AP STAs that are connected to an AP with a lower bandwidth than it (the AP) advertises (e.g. 160 MHz STA connected to 320 MHz AP) still be able to receive downlink OFDMA and respond to trigger frames for uplink OFDMA that specify the position and bandwidth for the non-AP STA relative to the channel the AP is using. Therefore, they need to be aware of this, and at least for some hardware (e.g. Intel) this awareness is in the hardware. As a result, use of the "same" channel may need to be split over two channel contexts where they differ by the AP being used. As a first step, introduce a concept of a channel request ('chanreq') for each interface, to control the context it requests. This step does nothing but reorganise the code, so that later the AP's chandef can be added to the request in order to handle the EHT case described above. Link: https://msgid.link/20240129194108.2e88e48bd2e9.I4256183debe975c5ed71621611206fdbb69ba330@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: iwlwifi: mvm: use EHT maximum MPDU length on 2.4 GHzJohannes Berg1-2/+13
On 2.4 GHz there's no VHT, so EHT defines its own bits for the maximum MPDU length. Use them when telling firmware about the maximum. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230620125813.fd5322bb48a4.Ic471045f83229ceaacce25edcf992d3ce2c75de5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: mvm: correctly access HE/EHT sband capaJohannes Berg1-20/+26
We can't just dereference the sband->iftype_data pointer, that's an array so we need to access the right entry. Use the previously introduced helper functions to do that. There are also cases, e.g. when loading with disable_11ax=1, where the pointer might be NULL but we still attempt to use it, causing a crash. Fixes: 529281bdf0fc ("iwlwifi: mvm: limit TLC according to our HE capabilities") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123446.a1f2b17ee39b.I8808120be744be8804815ce9e3e24ce6d2b424e3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-14wifi: iwlwifi: mvm: add support for Extra EHT LTFGregory Greenman1-0/+15
Add support for Extra EHT LTF defined in 9.4.2.313 EHT Capabilities element. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230613155501.de019d7cc174.I806f0f6042b89274192701a60b4f7900822db666@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-14wifi: iwlwifi: make debugfs entries link specificBenjamin Berg1-2/+2
All of the station elements are really elements for the link. Create them from the correct callback and return the link specific information rather than always using the default link. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230612184434.a8e0c40d325e.I374d9433c3b8694667e1ce550d65f6f1f0d23c05@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-14wifi: mac80211: add helpers to access sband iftype dataJohannes Berg1-3/+2
There's quite a bit of code accessing sband iftype data (HE, HE 6 GHz, EHT) and we always need to remember to use the ieee80211_vif_type_p2p() helper. Add new helpers to directly get it from the sband/vif rather than having to call ieee80211_vif_type_p2p(). Convert most code with the following spatch: @@ expression vif, sband; @@ -ieee80211_get_he_iftype_cap(sband, ieee80211_vif_type_p2p(vif)) +ieee80211_get_he_iftype_cap_vif(sband, vif) @@ expression vif, sband; @@ -ieee80211_get_eht_iftype_cap(sband, ieee80211_vif_type_p2p(vif)) +ieee80211_get_eht_iftype_cap_vif(sband, vif) @@ expression vif, sband; @@ -ieee80211_get_he_6ghz_capa(sband, ieee80211_vif_type_p2p(vif)) +ieee80211_get_he_6ghz_capa_vif(sband, vif) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230604120651.db099f49e764.Ie892966c49e22c7b7ee1073bc684f142debfdc84@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-18wifi: iwlwifi: mvm: remove RS rate init update argumentJohannes Berg1-7/+7
Track instead whether or not the station was authorized, that's clearer than trying to indicate in the code whether or not the full bandwidth should be used via an 'update' argument. While at it, give rs_fw_rate_init() the iwl_mvm_ prefix. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230417113648.92bd8d36e311.I1877a109104d5ffeaaad6a623e89f0c44decc38e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-18wifi: iwlwifi: mvm: initialize per-link STA ratescale dataJohannes Berg1-14/+21
When allocating a new link station, initialize the ratescaling data for it. To do that, refactor the initialization code out into a new iwl_mvm_rs_add_sta_link() function. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230417113648.441b6a8c60fd.I34f1b3555c25aaa22cc34d1112fc3b6393a20b7c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-18wifi: iwlwifi: mvm: rs-fw: properly access sband->iftype_dataJohannes Berg1-9/+12
We need to look up the correct version of this struct depending on the interface type, rather than just checking if the pointer is non-NULL. Fix that. Fixes: befebbb30af0 ("iwlwifi: rs: consider LDPC capability in case of HE") Fixes: b009cf71a982 ("iwlwifi: mvm: only enable HE DCM if we also support TX") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230417113648.1fd54368a02c.Ie4db5e8ae224d9a4a63b528da5d63e1b957b9cef@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-18wifi: iwlwifi: mvm: only clients can be 20MHz-onlyJohannes Berg1-6/+11
Since only clients to an AP can be 20MHz-only STAs, adjust the code to not make the use of EHT capabilities depend on only the bandwidth, but also the type of interface. Fixes: 701404f1091d ("wifi: iwlwifi: rs: add support for parsing max MCS per NSS/BW in 11be") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230417113648.a3a4c931e4a3.I693a07f4d88044c889eee04793883a83bc5ee362@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: iwlwifi: mvm: use appropriate link for rate selectionBenjamin Berg1-48/+61
We were still using the deflink in most cases, update the code to use the appropriate link. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230329100039.fa1025502fb4.Iaba0c64740fdcf04a521e2f213bd3f3e27862472@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: iwlwifi: mvm: adjust rs init to MLOGregory Greenman1-10/+26
Rate scale initialization needs some parameters stored separately for each link. Pass link_conf and link_sta pointers and adjust the relevant code accordingly. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230329100039.e2f458198844.I98bf3ea807dd8ae8d703915ce9c01e7b7d5ccb42@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: iwlwifi: mvm: rs-fw: don't crash on missing channelJohannes Berg1-0/+3
This is more of a workaround, with MLO we can get here with the deflink not assigned. It's not critical right now that we have this right, so WARN_ON_ONCE() and don't crash until we can fix this area of the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230329100039.2b0d31bdb60b.I39d23c76eec16ac49f6ae3a6d5f7652041bde855@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()Gregory Greenman1-8/+20
Move code handling specific state transitions into separate handlers and adjust them for MLO. Adjust relevant callbacks as well. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230328104949.5a3f8a849723.I0670d20436858a1cd3c055e03c7528db81292811@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: iwlwifi: mvm: sta preparation for MLOGregory Greenman1-5/+5
Split iwl_mvm_sta into general and link specific parts. As a first step, all link dependent parameters reside in deflink. The change was done mostly using the spatch below with some manual adjustments. @iwl_mvm_sta@ struct iwl_mvm_sta *s; identifier var = {sta_id, lq_sta, avg_energy}; @@ ( s-> - var + deflink.var ) Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230328104948.34eace06d583.I1f8c5e919a71b21030460fbdd220d42401b688b1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: iwlwifi: rs-fw: break out for unsupported bandwidthMordechay Goodstein1-2/+6
Currently the for loop runs also over unsupported bandwidth in the command, shorten the path in case we don't support it. Also use the right macro for setting BW20. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230305124407.0264ba9df63b.I6c7c9efc806e0ffb7cb3b6051b2d109646e8708c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-11-28wifi: iwlwifi: rs: add support for parsing max MCS per NSS/BW in 11beMordechay Goodstein1-2/+123
Rate scale needs to be configured to what MCS it can use per BW and NSS, this is done by parsing our capabilities of TX and peer's capabilities of RX and setting the minimum for rate scale usage. Also do some cleanup removing redundant enum defines not used by FW/Driver. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Link: https://lore.kernel.org/r/20221122220713.f71f3b4c4583.I7b5e8071df91146c4bee3e9bcb7ad62595b275e1@changeid Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
2022-09-06wifi: mac80211: keep A-MSDU data in sta and per-linkBenjamin Berg1-6/+6
The A-MSDU data needs to be stored per-link and aggregated into a single value for the station. Add a new struct ieee_80211_sta_aggregates in order to store this data and a new function ieee80211_sta_recalc_aggregates to update the current data for the STA. Note that in the non MLO case the pointer in ieee80211_sta will directly reference the data in deflink.agg, which means that recalculation may be skipped in that case. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211: make smps_mode per-linkBenjamin Berg1-3/+3
The SMPS power save mode needs to be per-link rather than being shared for all links. As such, move it into struct ieee80211_link_sta. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-04-11mac80211: prepare sta handling for MLO supportSriram R1-19/+19
Currently in mac80211 each STA object is represented using sta_info datastructure with the associated STA specific information and drivers access ieee80211_sta part of it. With MLO (Multi Link Operation) support being added in 802.11be standard, though the association is logically with a single Multi Link capable STA, at the physical level communication can happen via different advertised links (uniquely identified by Channel, operating class, BSSID) and hence the need to handle multiple link STA parameters within a composite sta_info object called the MLD STA. The different link STA part of MLD STA are identified using the link address which can be same or different as the MLD STA address and unique link id based on the link vif. To support extension of such a model, the sta_info datastructure is modified to hold multiple link STA objects with link specific params currently within sta_info moved to this new structure. Similarly this is done for ieee80211_sta as well which will be accessed within mac80211 as well as by drivers, hence trivial driver changes are expected to support this. For current non MLO supported drivers, only one link STA is present and link information is accessed via 'deflink' member. For MLO drivers, we still need to define the APIs etc. to get the correct link ID and access the correct part of the station info. Currently in mac80211, all link STA info are accessed directly via deflink. These will be updated to access via link pointers indexed by link id with MLO support patches, with link id being 0 for non MLO supported cases. Except for couple of macro related changes, below spatch takes care of updating mac80211 and driver code to access to the link STA info via deflink. @ieee80211_sta@ struct ieee80211_sta *s; struct sta_info *si; identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr}; @@ ( s-> - var + deflink.var | si->sta. - var + deflink.var ) @sta_info@ struct sta_info *si; identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth}; @@ ( si-> - var + deflink.var ) Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com [remove MLO-drivers notes from commit message, not clear yet; run spatch] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-18iwlwifi: tlc: Add logs in rs_fw_rate_init func to print TLC configurationAbhishek Naik1-1/+13
Add logs in rs_fw_rate_init function. It helps in verifying TLC Configuration while debuging TLC related bugs. Update kernel doc for TLC_MNG_CONFIG_CMD with correct version of struct iwl_tlc_config_cmd. Signed-off-by: Abhishek Naik <abhishek.naik@intel.com> Fixes: ae4c1bb06b66 ("iwlwifi: rs: add support for TLC config command ver 4") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220210181930.1fd6adfb6f1e.Icc8f5fd517735fcc10db098999ff1272da291298@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: mvm: only enable HE DCM if we also support TXMordechay Goodstein1-1/+4
Currently we enable DCM if the peer supports RX without checking whether we advertised that we support TX. Fix this by also checking that our TX side is set. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220129105618.6865266c8a34.If1de7849f25337bb14ba2f27896e9715ae5975df@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: make iwl_fw_lookup_cmd_ver() take a cmd_idJohannes Berg1-4/+7
Instead of taking the group/command separately, make the function take a combined command ID. In many cases, this allows us to pass an existing command ID (e.g. cmd.id), or introduce a new variable for it, so that we don't use the command ID twice. This way, we can also use LONG_GROUP implicitly, so we don't need to spell that out for many commands. Apart from mvm.h, fw/img.{c,h} changes and some copyright and indentation updates, this was done with spatch: @@ identifier cmd; expression fw, G, C, def; @@ struct iwl_host_cmd cmd = { .id = WIDE_ID(G, C), ... }; ... -iwl_fw_lookup_cmd_ver(fw, G, C, def) +iwl_fw_lookup_cmd_ver(fw, cmd.id, def) @@ identifier cmd; expression fw, C, def; @@ struct iwl_host_cmd cmd = { .id = C, ... }; ... -iwl_fw_lookup_cmd_ver(fw, \(IWL_ALWAYS_LONG_GROUP\|LONG_GROUP\), C, def) +iwl_fw_lookup_cmd_ver(fw, cmd.id, def) @@ identifier func; expression fw, G, C, mvm, flags, cmd, size, def; type rettype; @@ rettype func(...) { +u32 cmd_id = WIDE_ID(G, C); ... -iwl_fw_lookup_cmd_ver(fw, G, C, def) +iwl_fw_lookup_cmd_ver(fw, cmd_id, def) ... -iwl_mvm_send_cmd_pdu(mvm, WIDE_ID(G, C), flags, cmd, size) +iwl_mvm_send_cmd_pdu(mvm, cmd_id, flags, cmd, size) ... } @@ identifier func; expression fw, G, C, mvm, flags, cmd, size, def; type rettype; @@ rettype func(...) { +u32 cmd_id = C; ... -iwl_fw_lookup_cmd_ver(fw, \(IWL_ALWAYS_LONG_GROUP\|LONG_GROUP\), C, def) +iwl_fw_lookup_cmd_ver(fw, cmd_id, def) ... -iwl_mvm_send_cmd_pdu(mvm, C, flags, cmd, size) +iwl_mvm_send_cmd_pdu(mvm, cmd_id, flags, cmd, size) ... } @@ expression fw, C, def; @@ -iwl_fw_lookup_cmd_ver(fw, \(IWL_ALWAYS_LONG_GROUP\|LONG_GROUP\), C, def) +iwl_fw_lookup_cmd_ver(fw, C, def) @@ expression fw, C, G, def; @@ -iwl_fw_lookup_cmd_ver(fw, G, C, def) +iwl_fw_lookup_cmd_ver(fw, WIDE_ID(G, C), def) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220128153014.c4ac213cef5c.I6fd9a4fcbcf16ef3a3ae20a2b08ee54ebe06f96f@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: prefer WIDE_ID() over iwl_cmd_id()Johannes Berg1-1/+1
The order of arguments for iwl_cmd_id() is confusing, and the version is always 0 and thus a useless argument. Prefer the WIDE_ID() macro (which needs to be a macro due to use in switch cases etc.) over the iwl_cmd_id() function. Obviously done with spatch: @@ expression G, C; @@ -iwl_cmd_id(C, G, 0) +WIDE_ID(G, C) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220128153014.cc4f9d1a2e9b.Ieb023cd773ea22e819d1ef1c37ae857ecc1a839d@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: rs: add support for TLC config command ver 4Mordechay Goodstein1-22/+50
The new version enables support for EHT mode configurations. The name of IWL_TLC_HT_BW_NONE_160 change to IWL_TLC_MCS_PER_BW_80 to make the difference from 80 bandwidth (non 160), and the new bandwidth 320 which is also non 160. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211210090244.7d1a57f3df1b.Ibc01dde2b064329ad5f5bcefa83d1998d557cbdb@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: clean up indenting in iwl_mvm_tlc_update_notif()Dan Carpenter1-12/+13
These lines need to be indented one more tab. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211110080922.GF5176@kili Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: mvm: update rate scale in moving back to assoc stateMordechay Goodstein1-2/+6
In assoc state we only use narrow bandwidth, due to phy/radio not configured to max bandwidth. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204130722.139d74d2b063.I4cfbb594c110ea9b250e2306c30601f847db2c1a@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: Support version 3 of tlc_update_notif.Miri Korenblit1-0/+12
As part of the new rate_n_flags, a new version of tlc_update_notif was added in FW in order to support the new rate_n_flags. Add support for the new version, and move the all API to use the new rate_n_flags only (if FW supports the old one - convert it). Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017123741.9fc0cb5d5898.I1f88e02317f79f1be7f792c01236d836045a44b3@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: Remove antenna c referencesMiri Korenblit1-4/+0
Since antenna c is not in use and won't be relevant after the new rate & flags, remove all it's references Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017113927.5e39106ec75b.I4281edc844f734bf9591396a5cc8009ad37ccda8@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: rs-fw: don't support stbc for HE 160Mordechay Goodstein1-12/+8
Our HE doesn't support it so never set HE 160 stbc Fixes: 3e467b8e4cf4 ("iwlwifi: rs-fw: enable STBC in he correctly") Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124418.550fd1903eb7.I8ddbc2f87044a5ef78d916c9c59be797811a1b7f@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-05iwlwifi: mvm: slightly clean up rs_fw_set_supp_rates()Johannes Berg1-3/+2
The "supp" variable doesn't need to be unsigned long, only "tmp" is used with for_each_set_bit(). "supp" should just be a u16, since that's how it's sent to the firmware. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210205110447.762e50704a39.I014bc7898f90c734f8e9be2a3efaf9bf8b7db6db@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: use SPDX tagsJohannes Berg1-59/+5
Use SPDX tags instead of the long copyright notices. Also cleanup some duplicate copyright notices and combine the years where possible. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201210000603.481bcb512a6f.I8146abe5a637079e7336209f23cb26af98b12b31@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: mvm: add support for 6GHzLuca Coelho1-0/+12
Add support to the 6GHz band (aka. Ultra High Band or UHB). This allows us to scan and connect to channels in that band, including all the relevant features, such as preferred scan channels, colocated channels etc. Co-developed-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Co-developed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Co-developed-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Tova Mussai <tova.mussai@intel.com> Co-developed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Co-developed-by: Tali Levi Rovinsky <Tali.Levi-rovinsky@intel.com> Signed-off-by: Tali Levi Rovinsky <Tali.Levi-rovinsky@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201210000657.0fdbfc3d7352.Idb648536faf21716e2ab2c6d6890d3e49f719cd3@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-10-08iwlwifi: rs: align to new TLC config command APIMordechay Goodstein1-1/+7
The new API adds 4 bytes at end of the struct. We just need to make sure that we don't break compatibility with old FWs. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008181047.bb31ce80fc55.I8a272d1da1334b1805761c0731e5d0c76ca2ef29@changeid
2020-10-01iwlwifi: mvm: rs-fw: handle VHT extended NSS capabilityJohannes Berg1-5/+19
If extended NSS capability is used, the NSS for 160 may be lower than for 80. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200911204056.523f5eca82ce.Ic0cd9cc86a91b1f23a5a54921736332be9abac29@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-05-08iwlwifi: avoid debug max amsdu config overwriting itselfMordechay Goodstein1-7/+8
If we set amsdu_len one after another the second one overwrites the orig_amsdu_len so allow only moving from debug to non debug state. Also the TLC update check was wrong: it was checking that also the orig is smaller then the new updated size, which is not the case in debug amsdu mode. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Fixes: af2984e9e625 ("iwlwifi: mvm: add a debugfs entry to set a fixed size AMSDU for all TX packets") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200424182644.e565446a4fce.I9729d8c520d8b8bb4de9a5cdc62e01eb85168aac@changeid
2020-03-28Merge tag 'wireless-drivers-next-2020-03-27' of ↵David S. Miller1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.7 Third set of patches for v5.7. Nothing really special this time, business as usual. When pulling this to net-next there's again a conflict in: drivers/net/wireless/intel/iwlwifi/pcie/drv.c To solve this drop these three lines from the conflict (the first hunk from "HEAD") as the whole AX200 block was moved above in the same file: IWL_DEV_INFO(0x2723, 0x1653, iwl_ax200_cfg_cc, iwl_ax200_killer_1650w_name), IWL_DEV_INFO(0x2723, 0x1654, iwl_ax200_cfg_cc, iwl_ax200_killer_1650x_name), IWL_DEV_INFO(0x2723, IWL_CFG_ANY, iwl_ax200_cfg_cc, iwl_ax200_name), And keep all the __IWL_DEV_INFO() entries (the second hunk). In other words, take everything from wireless-drivers-next. When running 'git diff' after the resolution the output should be empty. Major changes: brcmfmac * add USB autosuspend support ath11k * handle RX fragments * enable PN offload * add support for HE BSS color iwlwifi * support new FW API version * support for EDCA measurements * new scan API features * enable new firmware debugging code ==================== Kalle gave me directions on how to resolve the iwlwifi conflict as follows: ==================== When pulling this to net-next there's again a conflict in: drivers/net/wireless/intel/iwlwifi/pcie/drv.c To solve this drop these three lines from the conflict (the first hunk from "HEAD") as the whole AX200 block was moved above in the same file: IWL_DEV_INFO(0x2723, 0x1653, iwl_ax200_cfg_cc, iwl_ax200_killer_1650w_name), IWL_DEV_INFO(0x2723, 0x1654, iwl_ax200_cfg_cc, iwl_ax200_killer_1650x_name), IWL_DEV_INFO(0x2723, IWL_CFG_ANY, iwl_ax200_cfg_cc, iwl_ax200_name), And keep all the __IWL_DEV_INFO() entries (the second hunk). In other words, take everything from wireless-drivers-next. When running 'git diff' after the resolution the output should be empty. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27iwlwifi: mvm: rs-fw: fix some indentationJohannes Berg1-2/+1
That closing brace for the switch statement is misplaced, fix it. Change-Id: I39af135a9e3fc64337d2cced43a70cb48fe3b9c1 Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-06iwlwifi: mvm: Fix rate scale NSS configurationIlan Peer1-8/+21
The TLC configuration did not take into consideration the station's SMPS configuration, and thus configured rates for 2 NSS even if static SMPS was reported by the station. Fix this. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200306151129.b4f940d13eca.Ieebfa889d08205a3a961ae0138fb5832e8a0f9c1@changeid
2020-03-06iwlwifi: consider HE capability when setting LDPCMordechay Goodstein1-1/+5
The AP may set the LDPC capability only in HE (IEEE80211_HE_PHY_CAP1), but we were checking it only in the HT capabilities. If we don't use this capability when required, the DSP gets the wrong configuration in HE and doesn't work properly. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Fixes: befebbb30af0 ("iwlwifi: rs: consider LDPC capability in case of HE") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200306151128.492d167c1a25.I1ad1353dbbf6c99ae57814be750f41a1c9f7f4ac@changeid
2019-11-15iwlwifi: mvm: print rate_n_flags in a pretty formatMordechay Goodstein1-2/+4
Use the rs_pretty_print_rate() function to print the rate_n_flags in more human-readable format. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: in VHT connection use only VHT capabilitiesMordechay Goodstein1-1/+1
mac80211 limits amsdu size to the minimum of HT and VHT capabilities but since in a VHT connection we don't transmit HT frames we can discard HT limits. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-25iwlwifi: mvm: consider ieee80211 station max amsdu valueMordechay Goodstein1-1/+7
debugfs amsdu_len sets only the max_amsdu_len for ieee80211 station so take it into consideration while getting max amsdu Fixes: af2984e9e625 ("iwlwifi: mvm: add a debugfs entry to set a fixed size AMSDU for all TX packets") Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: mvm: name magic numbers with enumMordechay Goodstein1-8/+11
It's hard to follow the numbers so rename it with enum Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: remove some unnecessary NULL checksDan Carpenter1-12/+11
These pointers are an offset into the "sta" struct. They're assigned like this: const struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap; They're not the first member of the struct (->supp_rates[] is first) so they can't be NULL. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: mvm: add a debugfs entry to set a fixed size AMSDU for all TX packetsMordechay Goodstein1-1/+1
The current debugfs entry only limits the max AMSDU for TCP. Add a new debugfs entry to allow setting a fixed AMSDU size for all TX packets, including UDP and ICMP Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-01iwlwifi: mvm: change TLC config cmd sent by rs to be asyncLior Cohen1-1/+2
The TLC_MNG_CONFIG sync cmd sent by the rs leads to a kernel warning of sleeping while in rcu read-side critical section. The fix is to change the command to be ASYNC (not blocking for the response anymore). Signed-off-by: Lior Cohen <lior2.cohen@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-29iwlwifi: mvm: limit TLC according to our HE capabilitiesLiad Kaufman1-5/+29
Instead of setting the TLC config command according to the rates the peer supports, make sure that we aren't also limited by our own rates, so take the minimum between the peer's supported RX rates and our supported TX rates. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-18 03:51:33 +0300