summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/microchip
AgeCommit message (Collapse)AuthorFilesLines
2022-06-20wifi: cfg80211: do some rework towards MLO link APIsJohannes Berg1-1/+2
In order to support multi-link operation with multiple links, start adding some APIs. The notable addition here is to have the link ID in a new nl80211 attribute, that will be used to differentiate the links in many nl80211 operations. So far, this patch adds the netlink NL80211_ATTR_MLO_LINK_ID attribute (as well as the NL80211_ATTR_MLO_LINKS attribute) and plugs it through the system in some places, checking the validity etc. along with other infrastructure needed for it. For now, I've decided to include only the over-the-air link ID in the API. I know we discussed that we eventually need to have to have other ways of identifying a link, but for local AP mode and auth/assoc commands as well as set_key etc. we'll use the OTA ID. Also included in this patch is some refactoring of the data structures in struct wireless_dev, splitting for the first time the data into type dependent pieces, to make reasoning about these things easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-30wifi: wilc1000: add IGTK supportAjay Singh6-23/+171
Add support to handle IGTK keys which are required for MFP to FW. Index ID 4 and 5 are used to store the IGTK key. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220524120606.9675-4-ajay.kathat@microchip.com
2022-05-30wifi: wilc1000: add WPA3 SAE supportAjay Singh9-14/+133
Enable SAE authentication for AP and STA mode. In STA mode, allow the driver to pass the auth frames which are received from firmware to userspace application(hostapd) so that SAE authentication is offloaded to userspace. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220524120606.9675-3-ajay.kathat@microchip.com
2022-05-30wifi: wilc1000: remove WEP security supportAjay Singh5-198/+2
Deprecated WEP security for WILC driver as well as in firmware from 15.6 FW release onwards. After WEP security removal, freeup some codespace which helped to add new features like WPA3 etc. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220524120606.9675-2-ajay.kathat@microchip.com
2022-05-30wifi: wilc1000: use correct sequence of RESET for chip Power-UP/DownAjay Singh1-3/+3
For power-up sequence, WILC expects RESET set to high 5ms after making chip_en(enable) so corrected chip power-up sequence by making RESET high. For Power-Down sequence, the correct sequence make RESET and CHIP_EN low without any extra delay. Fixes: ec031ac4792c ("wilc1000: Add reset/enable GPIO support to SPI driver") Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220524120606.9675-1-ajay.kathat@microchip.com
2022-05-11wilc1000: add valid vmm_entry check before fetching from TX queueAjay Singh1-3/+4
'vmm_table' array contains the size of data buffer length including host header length. In 'vmm_table' array, the Zero value means the end of vmm_entries that needs to transfer to firmware which is calculated based on VMM free size in firmware. Use 'vmm_table' valid entry check before fetching the entry from TX queue to only copy valid number of entries to avoid possible NULL pointer exception observed sometimes during large file transfers. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220504161924.2146601-5-ajay.kathat@microchip.com
2022-05-11wilc1000: use 'u64' datatype for cookie variableAjay Singh1-1/+1
Use 'u64' instead of 'u32' for the cookie variable as expected by cfg80211 callback function argument. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220504161924.2146601-4-ajay.kathat@microchip.com
2022-05-11wilc1000: fix crash observed in AP mode with cfg80211_register_netdevice()Ajay Singh1-2/+2
Monitor(mon.) interface is used for handling the AP mode and 'ieee80211_ptr' reference is not getting set for it. Like earlier implementation, use register_netdevice() instead of cfg80211_register_netdevice() which expects valid 'ieee80211_ptr' reference to avoid the possible crash. Fixes: 2fe8ef106238 ("cfg80211: change netdev registration/unregistration semantics") Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220504161924.2146601-3-ajay.kathat@microchip.com
2022-05-11wilc1000: use fixed function base register value to access SDIO_FBR_ENABLE_CSAAjay Singh1-1/+1
The function number was not correct(reset to 0) when host resumes from suspend state. Use hardcoded value in function base information register(FBR base address) to re-initialize correctly on host resume. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220504161924.2146601-2-ajay.kathat@microchip.com
2022-05-11wilc1000: increase firmware version array sizeAjay Singh1-1/+2
Increase firmware version array size to hold complete version information. The firmware commit id(Build:) information is also part of the firmware version string. Firmware version format: WILC_WIFI_FW_REL_XX_XX Build: XXXXX e.g. WILC_WIFI_FW_REL_15_6 Build: 12804 Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220504161924.2146601-1-ajay.kathat@microchip.com
2022-02-28Merge tag 'spi-remove-void' of ↵Jakub Kicinski1-3/+1
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Mark Brown says: ==================== spi: Make remove() return void This series from Uwe Kleine-König converts the spi remove function to return void since there is nothing useful that we can do with a failure and it as more buses are converted it'll enable further work on the driver core. ==================== Link: https://lore.kernel.org/r/20220228173957.1262628-2-broonie@kernel.org/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-09spi: make remove callback a void functionUwe Kleine-König1-3/+1
The value returned by an spi driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Claudius Heine <ch@denx.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-31wilc1000: use min_t() to make code cleanerChangcheng Deng1-4/+1
Use min_t() in order to make code cleaner. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211222070815.483009-1-deng.changcheng@zte.com.cn
2021-12-22wilc1000: Add reset/enable GPIO support to SPI driverDavid Mosberger-Tang2-4/+60
For the SDIO driver, the RESET/ENABLE pins of WILC1000 are controlled through the SDIO power sequence driver. This commit adds analogous support for the SPI driver. Specifically, during initialization, the chip will be ENABLEd and taken out of RESET and during deinitialization, the chip will be placed back into RESET and disabled (both to reduce power consumption and to ensure the WiFi radio is off). Both RESET and ENABLE GPIOs are optional. However, if the ENABLE GPIO is specified, then the RESET GPIO should normally also be specified as otherwise there is no way to ensure proper timing of the ENABLE/RESET sequence. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211221212531.4011609-2-davidm@egauge.net
2021-12-22wilc1000: Convert static "chipid" variable to device-local variableDavid Mosberger-Tang2-14/+14
Move "chipid" variable into the per-driver structure so the code doesn't break if more than one wilc1000 module is present. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211221210538.4011227-1-davidm@egauge.net
2021-12-20wilc1000: fix double free error in probe()Dan Carpenter3-1/+4
Smatch complains that there is a double free in probe: drivers/net/wireless/microchip/wilc1000/spi.c:186 wilc_bus_probe() error: double free of 'spi_priv' drivers/net/wireless/microchip/wilc1000/sdio.c:163 wilc_sdio_probe() error: double free of 'sdio_priv' The problem is that wilc_netdev_cleanup() function frees "wilc->bus_data". That's confusing and a layering violation. Leave the frees in probe(), delete the free in wilc_netdev_cleanup(), and add some new frees to the remove() functions. Fixes: dc8b338f3bcd ("wilc1000: use goto labels on error path") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211217150311.GC16611@kili
2021-12-16wilc1000: Improve WILC TX performance when power_save is offDavid Mosberger-Tang3-2/+6
The wakeup and sleep commands need to be sent to the WILC chip only when it is in power save mode (PSM, as controlled by "iw dev wlan0 set power_save on/off"). The commands are relatively costly, so it pays to skip them when possible. iperf3 without this patch (no significant different with PSM on/off): TX 0.00-120.01 sec 140 MBytes 9.82 Mbits/sec RX 0.00-120.69 sec 283 MBytes 19.6 Mbits/sec with this patch applied: PSM off (TX is 46% improved, RX slightly improved; may not be significant): TX 0.00-120.00 sec 206 MBytes 14.4 Mbits/sec RX 0.00-120.48 sec 322 MBytes 22.4 Mbits/sec PSM on (no significant change): TX 0.00-120.00 sec 140 MBytes 9.78 Mbits/sec RX 0.00-120.08 sec 257 MBytes 18.0 Mbits/sec Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211210203016.3680425-2-davidm@egauge.net
2021-12-14wilc1000: Rename workqueue from "WILC_wq" to "NETDEV-wq"David Mosberger-Tang2-11/+14
This follows normal Linux convention and is more useful since the new name will make it apparent which network device the work-queue is for (e.g., the name will be "wlan0-wq" for network device "wlan0"). hif_workqueue allocation has to move from cfg80211.c:wilc_cfg80211_init() to netdev.c:wilc_netdev_ifc_init() because the network device name is not known until after the netdev is registered. The move also makes sense because netdev.c is already responsible for destroying the work queue when it is no longer needed. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209044411.3482259-5-davidm@egauge.net
2021-12-14wilc1000: Rename tx task from "K_TXQ_TASK" to NETDEV-txDavid Mosberger-Tang1-1/+1
This follows normal Linux conventions and is also more useful because the netdevice name is part of the task name (e.g., "wlan0-tx" for network device "wlan0"). Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209044411.3482259-4-davidm@egauge.net
2021-12-14wilc1000: Rename irq handler from "WILC_IRQ" to netdev nameDavid Mosberger-Tang1-1/+1
This change follows normal Linux convention and the new name is more useful since it'll be clear which irq handler statistics correspond to which net device. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209044411.3482259-3-davidm@egauge.net
2021-12-14wilc1000: Rename SPI driver from "WILC_SPI" to "wilc1000_spi"David Mosberger-Tang2-3/+3
The name "wilc1000_spi" follows normal Linux conventions and also is analogous to the SDIO driver, which uses "wilc1000_sdio". Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209044411.3482259-2-davidm@egauge.net
2021-12-14wilc1000: Fix spurious "FW not responding" errorDavid Mosberger-Tang1-1/+2
When deinitializing the driver, one or more "FW not responding" error appears on the console. This appears to be due to wilc_wlan_stop() disabling host/WILC1000 communication, but then right afterwards, it tries to release the bus with chip-sleep enabled. The problem is enabling the chip-sleep cannot success once host/WILC1000 communication is disabled. Fix by only releasing the bus. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211208062747.3405221-1-davidm@egauge.net
2021-12-14wilc1000: Remove misleading USE_SPI_DMA macroDavid Mosberger-Tang1-5/+0
The USE_SPI_DMA macro name suggests that it could be set to 1 to control whether or not SPI DMA should be used. However, that's not what it does. If set to 1, it'll set the SPI messages' "is_dma_mapped" flag to true, even though the tx/rx buffers aren't actually DMA mapped by the driver. In other words, setting this flag to 1 will break the driver. Best to clean up this confusion by removing the macro altogether. There is no need to explicitly initialize "is_dma_mapped" because the message is cleared to zero anyhow, so "is_dma_mapped" is set to false by default. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Acked-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211207002453.3193737-1-davidm@egauge.net
2021-12-14wilc1000: Fix missing newline in error messageDavid Mosberger-Tang1-1/+1
Add missing newline in pr_err() message. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211206232709.3192856-3-davidm@egauge.net
2021-12-14wilc1000: Fix copy-and-paste typo in wilc_set_mac_addressDavid Mosberger-Tang1-1/+1
The messages appears to have been copied from wilc_get_mac_address and says "get" when it should say "set". Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211206232709.3192856-2-davidm@egauge.net
2021-12-08wilc1000: Add id_table to spi_driverDavid Mosberger-Tang1-0/+7
This eliminates warning message: SPI driver WILC_SPI has no spi_device_id for microchip,wilc1000 and makes device-tree autoloading work. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211202045001.2901903-1-davidm@egauge.net
2021-12-08Merge tag 'wireless-drivers-next-2021-12-07' of ↵Jakub Kicinski1-5/+0
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.17 First set of patches for v5.17. The biggest change is the iwlmei driver for Intel's AMT devices. Also now WCN6855 support in ath11k should be usable. Major changes: ath10k * fetch (pre-)calibration data via nvmem subsystem ath11k * enable 802.11 power save mode in station mode for qca6390 and wcn6855 * trace log support * proper board file detection for WCN6855 based on PCI ids * BSS color change support rtw88 * add debugfs file to force lowest basic rate * add quirk to disable PCI ASPM on HP 250 G7 Notebook PC mwifiex * add quirk to disable deep sleep with certain hardware revision in Surface Book 2 devices iwlwifi * add iwlmei driver for co-operating with Intel's Active Management Technology (AMT) devices * tag 'wireless-drivers-next-2021-12-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (87 commits) iwlwifi: mei: fix linking when tracing is not enabled rtlwifi: rtl8192de: Style clean-ups mwl8k: Use named struct for memcpy() region intersil: Use struct_group() for memcpy() region libertas_tf: Use struct_group() for memcpy() region libertas: Use struct_group() for memcpy() region wlcore: no need to initialise statics to false rsi: Fix out-of-bounds read in rsi_read_pkt() rsi: Fix use-after-free in rsi_rx_done_handler() brcmfmac: Configure keep-alive packet on suspend wilc1000: remove '-Wunused-but-set-variable' warning in chip_wakeup() iwlwifi: mvm: read the rfkill state and feed it to iwlmei iwlwifi: mvm: add vendor commands needed for iwlmei iwlwifi: integrate with iwlmei iwlwifi: mei: add debugfs hooks iwlwifi: mei: add the driver to allow cooperation with CSME mei: bus: add client dma interface mwifiex: Ignore BTCOEX events from the 88W8897 firmware mwifiex: Ensure the version string from the firmware is 0-terminated mwifiex: Add quirk to disable deep sleep with certain hardware revision ... ==================== Link: https://lore.kernel.org/r/20211207144211.A9949C341C1@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-26wilc1000: remove '-Wunused-but-set-variable' warning in chip_wakeup()Ajay Singh1-5/+0
Remove unused variables to avoid the below warnings: drivers/net/wireless/microchip/wilc1000/wlan.c: In function 'chip_wakeup': >> drivers/net/wireless/microchip/wilc1000/wlan.c:620:34: warning: variable 'to_host_from_fw_bit' set but not used [-Wunused-but-set-variable] 620 | u32 to_host_from_fw_reg, to_host_from_fw_bit; | ^~~~~~~~~~~~~~~~~~~ >> drivers/net/wireless/microchip/wilc1000/wlan.c:620:13: warning: variable 'to_host_from_fw_reg' set but not used [-Wunused-but-set-variable] 620 | u32 to_host_from_fw_reg, to_host_from_fw_bit; | ^~~~~~~~~~~~~~~~~~~ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211115102809.1408267-1-ajay.kathat@microchip.com
2021-11-19wilc1000: copy address before calling wilc_set_mac_addressJakub Kicinski1-3/+3
wilc_set_mac_address() calls IO routines which don't guarantee the pointer won't be written to. Make a copy. Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20wilc1000: use eth_hw_addr_set()Jakub Kicinski2-5/+11
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211018235021.1279697-13-kuba@kernel.org
2021-10-13wireless: Remove redundant 'flush_workqueue()' callsChristophe JAILLET1-1/+0
'destroy_workqueue()' already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant 'flush_workqueue()' calls. This was generated with coccinelle: @@ expression E; @@ - flush_workqueue(E); destroy_workqueue(E); Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/0855d51423578ad019c0264dad3fe47a2e8af9c7.1633849511.git.christophe.jaillet@wanadoo.fr
2021-09-21wilc1000: increase config packets response wait timeout limitAjay Singh1-1/+1
Increase the WID config packet response timeout to have extra wait time for host to receive the response message from firmware. Sometimes the WID config response was timed out because of host interrupt latency. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210916164902.74629-12-ajay.kathat@microchip.com
2021-09-21wilc1000: use correct write command sequence in wilc_spi_sync_ext()Ajay Singh1-1/+1
Instead of using double read for the same register, use the write register command after the read command. The correct sequence is to use the read value in write command instead of reading the same register again. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210916164902.74629-11-ajay.kathat@microchip.com
2021-09-21wilc1000: add 'initialized' flag check before adding an element to TX queueAjay Singh2-0/+13
Add 'initialized' variable check before adding net/mgmt packet to TX queue as safety check before passing the commands to the firmware. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210916164902.74629-10-ajay.kathat@microchip.com
2021-09-21wilc1000: invoke chip reset register before firmware downloadAjay Singh1-3/+19
Add the chip reset command to initialize the WILC chip before downloading the firmware. Also, put the chip in wake-up mode so it is ready to receive the firmware binary from the host. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210916164902.74629-9-ajay.kathat@microchip.com
2021-09-21wilc1000: ignore clockless registers status response for SPIAjay Singh1-4/+8
During WILC chip wake-up sequence, the clockless status register sometimes reports failure even when the actual status is successful. So, for the clockless register, remove the incorrect error status reporting during the read and write command API's. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210916164902.74629-8-ajay.kathat@microchip.com
2021-09-21wilc1000: handle read failure issue for clockless registersAjay Singh4-0/+23
For SPI bus, the register read fails after read/write to the clockless register during chip wakeup sequence. Add workaround to send CMD_RESET command during chip wake-up sequence to overcome the issue. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210916164902.74629-7-ajay.kathat@microchip.com
2021-09-21wilc1000: add reset/terminate/repeat command support for SPI busAjay Singh1-0/+61
Add reset/terminate/repeat command for SPI module. In case of SPI commands failure, the host should issue a RESET command to WILC chip to recover from any temporary bus error. For now, the new command support is added and later the SPI read/write API's would be modified to make use of these commands for retry mechanism Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210916164902.74629-6-ajay.kathat@microchip.com
2021-09-21wilc1000: configure registers to handle chip wakeup sequenceAjay Singh5-55/+53
Use the correct sequence to configure clockless registers for chip wake-up. The following sequence is expected from WILC chip for wakeup: - set wakeup bit in wakeup_reg register - after setting the wakeup bit, read back the clock status bit for wakeup complete. For SDIO/SPI modules, the wakeup sequence is the same except uses different register values so refactored the code to use common function for both SDIO/SPI bus. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210916164902.74629-5-ajay.kathat@microchip.com
2021-09-21wilc1000: add new WID to pass wake_enable information to firmwareAjay Singh5-0/+28
Add new WID(WID_WOWLAN_TRIGGER) to send wake_enable information to firmware. In 'set_wakeup' cfg80211_ops callback, the enable information was not passed to firmware which is required to handle WOWLan trigger notification from firmware. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210916164902.74629-4-ajay.kathat@microchip.com
2021-09-21wilc1000: fix possible memory leak in cfg_scan_result()Ajay Singh1-2/+1
When the BSS reference holds a valid reference, it is not freed. The 'if' condition is wrong. Instead of the 'if (bss)' check, the 'if (!bss)' check is used. The issue is solved by removing the unnecessary 'if' check because cfg80211_put_bss() already performs the NULL validation. Fixes: 6cd4fa5ab691 ("staging: wilc1000: make use of cfg80211_inform_bss_frame()") Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210916164902.74629-3-ajay.kathat@microchip.com
2021-09-21wilc1000: move 'deinit_lock' lock init/destroy inside module probeAjay Singh3-8/+2
Move initialization & deinitialization of 'deinit_lock' mutex lock inside wlan_init_locks() & wlan_deinit_locks() API's respectively alongside other locks. After the movement, the client count variable(client_count) which is used for lock init/deinit is removed. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210916164902.74629-2-ajay.kathat@microchip.com
2021-08-29wilc1000: Convert module-global "isinit" to device-specific variableDavid Mosberger-Tang1-7/+8
Move static "isinit" variable to wilc_spi structure to allow multiple WILC1000 devices per machine. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210828151346.3012697-1-davidm@egauge.net
2021-08-21wilc1000: remove redundant codewengjianfeng1-22/+16
Some of the code is redundant, so goto statements are used to remove them Signed-off-by: wengjianfeng <wengjianfeng@yulong.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210705023731.31496-1-samirweng1979@163.com
2021-08-21wilc1000: use devm_clk_get_optional()Claudiu Beznea2-16/+13
Use devm_clk_get_optional() for rtc clock: it simplifies a bit the code. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210806081229.721731-4-claudiu.beznea@microchip.com
2021-08-21wilc1000: dispose irq on failure pathClaudiu Beznea1-2/+3
Dispose IRQ on failure path. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210806081229.721731-3-claudiu.beznea@microchip.com
2021-08-21wilc1000: use goto labels on error pathClaudiu Beznea2-12/+20
Use goto labels on error path for probe functions. This makes code easier to read. With this introduce also netdev_cleanup and call it where necessary. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210806081229.721731-2-claudiu.beznea@microchip.com
2021-06-15wilc1000: Fix clock name bindingTudor Ambarus1-1/+1
Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml requires an "rtc" clock name. drivers/net/wireless/microchip/wilc1000/sdio.c is using "rtc" clock name as well. Comply with the binding in wilc1000/spi.c too. Fixes: 854d66df74ae ("staging: wilc1000: look for rtc_clk clock in spi mode") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210428025445.81953-1-tudor.ambarus@microchip.com
2021-04-18wilc1000: Remove duplicate struct declarationWan Jiabing1-1/+0
struct wilc is declared twice. One has been declared at 352nd line. Remove the duplicate. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210331023557.2804128-3-wanjiabing@vivo.com
2021-04-17wilc1000: fix a loop timeout conditionDan Carpenter1-1/+1
If the loop fails, the "while(trials--) {" loop will exit with "trials" set to -1. The test for that expects it to end with "trials" set to 0 so the warning message will not be printed. Fix this by changing from a post-op to a pre-op. This does mean that we only make 99 attempts instead of 100 but that's okay. Fixes: f135a1571a05 ("wilc1000: Support chip sleep over SPI") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/YFS5gx/gi70zlIaO@mwanda
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-10 15:46:07 +0300