| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
ice_clear_dflt_vsi() is only removing default rule. Both default RX and
TX rule should be removed during release.
If it isn't switching to switchdev, second time results in error, because
TX filter is already there.
Fix it by removing the correct set of rules.
Fixes: 50d62022f455 ("ice: default Tx rule instead of to queue")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This driver currently doesn't support any control flags.
Use flow_rule_match_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_match_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This driver currently doesn't support any control flags.
Use flow_rule_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This driver currently doesn't support any control flags.
Use flow_rule_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This driver currently doesn't support any control flags.
Use flow_rule_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently the ipq806x dwmac driver is almost always used attached to the
CPU port of a switch and phy-mode was always set to "rgmii" or "sgmii".
Some device came up with a special configuration where the PHY is
directly attached to the GMAC port and in those case phy-mode needs to
be set to "rgmii-id" to make the PHY correctly work and receive packets.
Since the driver supports only "rgmii" and "sgmii" mode, when "rgmii-id"
(or variants) mode is set, the mode is rejected and probe fails.
Add support also for these phy-modes to correctly setup PHYs that requires
delay applied to tx/rx.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Different revisions of the Marvell 88q2xxx phy needs different init
sequences.
Add init sequence for Rev B1 and Rev B2. Rev B2 init sequence skips one
register write.
Tested-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Microchip KSZ and LAN variants do not have per port DSCP priority
configuration. Instead there is a global DSCP mapping table.
This patch provides write access to this global DSCP map. In case entry
is "deleted", we map corresponding DSCP entry to a best effort prio,
which is expected to be the default priority for all untagged traffic.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
802.1P (PCP) and DiffServ (DSCP) are handled now by DCB code. Let it do
all needed initial configuration.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
KSZ8xxx variants
Init priority to queue mapping in the way as it shown in IEEE 802.1Q
mapping example.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I tested ETS support on KSZ9893, so it should work other KSZ989X
variants too, which was till not listed as support.
With this change we now officially not support only ksz8 family of
chips.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
KSZ88X3 switches have different behavior on different ports:
- It seems to be not possible to disable VLAN PCP classification on port
2. It means, as soon as mutliqueue support is enabled, frames with
VLAN tag will get PCP prios. This behavior do not affect Port 1 -
it is possible to disable PCP prios.
- DSCP classification is not working on Port 2.
Since there are still usable configuration combinations, I added some
quirks to make sure user will get appropriate error message if not
possible configuration is chosen.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add DCB support to configure app trust sources and default port priority.
Following commands can be used for testing:
dcb apptrust set dev lan1 order pcp dscp
dcb app replace dev lan1 default-prio 3
Since it is not possible to configure DSCP-Prio mapping per port, this
patch provide only ability to read switch global dscp-prio mapping and
way to enable/disable app trust for DSCP.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
KSZ88X3 switches support up to 4 queues. Rework ksz8795_set_prio_queue()
to support KSZ8795 and KSZ88X3 families of switches.
Per default, configure KSZ88X3 to use one queue, since it need special
handling due to priority related errata. Errata handling is implemented
in a separate patch.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most of Microchip KSZ switches use Internal Priority Value associated
with every frame. For example, it is possible to map any VLAN PCP or
DSCP value to IPV and at the end, map IPV to a queue.
Since amount of IPVs is not equal to amount of queues, add this
information and make use of it in some functions.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-05-06 (ice)
This series contains updates to ice driver only.
Paul adds support for additional E830 devices and adjusts naming for
existing E830 devices.
Marcin commonizes a couple of TC setup calls to reduce duplicated code.
Mateusz adds ice_vsi_cfg_params into ice_vsi to consolidate info.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: refactor struct ice_vsi_cfg_params to be inside of struct ice_vsi
ice: Deduplicate tc action setup
ice: update E830 device ids and comments
ice: add additional E830 device ids
====================
Link: https://lore.kernel.org/r/20240506170827.948682-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some usb drivers set small skb->truesize and break
core networking stacks.
In this patch, I removed one of the skb->truesize override.
I also replaced one skb_clone() by an allocation of a fresh
and small skb, to get minimally sized skbs, like we did
in commit 1e2c61172342 ("net: cdc_ncm: reduce skb truesize
in rx path") and 4ce62d5b2f7a ("net: usb: ax88179_178a:
stop lying about skb->truesize")
Fixes: c9b37458e956 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240506143939.3673865-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some usb drivers try to set small skb->truesize and break
core networking stacks.
In this patch, I removed one of the skb->truesize override.
I also replaced one skb_clone() by an allocation of a fresh
and small skb, to get minimally sized skbs, like we did
in commit 1e2c61172342 ("net: cdc_ncm: reduce skb truesize
in rx path") and 4ce62d5b2f7a ("net: usb: ax88179_178a:
stop lying about skb->truesize")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steve Glendinning <steve.glendinning@shawell.net>
Link: https://lore.kernel.org/r/20240506142358.3657918-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some usb drivers try to set small skb->truesize and break
core networking stacks.
I replace one skb_clone() by an allocation of a fresh
and small skb, to get minimally sized skbs, like we did
in commit 1e2c61172342 ("net: cdc_ncm: reduce skb truesize
in rx path") and 4ce62d5b2f7a ("net: usb: ax88179_178a:
stop lying about skb->truesize")
Fixes: 361459cd9642 ("net: usb: aqc111: Implement RX data path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240506135546.3641185-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simon reported that ndo_change_mtu() methods were never
updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted
in commit 501a90c94510 ("inet: protect against too small
mtu values.")
We read dev->mtu without holding RTNL in many places,
with READ_ONCE() annotations.
It is time to take care of ndo_change_mtu() methods
to use corresponding WRITE_ONCE()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The embedded PHYs of the 88E6250 family switches are very basic - they
do not even have an Extended Address / Page register.
This adds support for the PHYs to the driver to set up PHY interrupts
and retrieve error stats. To deal with PHYs without a page register,
"simple" variants of all stat handling functions are introduced.
The code should work with all 88E6250 family switches (6250/6220/6071/
6070/6020). The PHY ID 0x01410db0 was read from a 88E6020, under the
assumption that all switches of this family use the same ID. The spec
only lists the prefix 0x01410c00 and leaves the last 10 bits as reserved,
but that seems too unspecific to be useful, as it would cover several
existing PHY IDs already supported by the driver; therefore, the ID read
from the actual hardware is used.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/0695f699cd942e6e06da9d30daeedfd47785bc01.1714643285.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The list of stat registers is read-only, so we can declare it as const.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/24d7a2f39e0c4c94466e8ad43228fdd798053f3a.1714643285.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This loop is supposed to copy the mac address to cmd->addr but the
i++ increment is missing so it copies everything to cmd->addr[0] and
only the last address is recorded.
Fixes: 22bedad3ce11 ("net: convert multicast list to list_head")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/b788be9a-15f5-4cca-a3fe-79df4c8ce7b2@moroto.mountain
|
|
The rtnl lock is no longer needed to protect the control buffer and
command VQ.
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Tested-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Once the RTNL locking around the control buffer is removed there can be
contention on the per queue RX interrupt coalescing data. Use a mutex
per queue. A mutex is required because virtnet_send_command can sleep.
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Tested-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since we no longer have to hold the RTNL lock here just do updates for
the specified queue.
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Tested-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The command VQ will no longer be protected by the RTNL lock. Use a
mutex to protect the control buffer header and the VQ.
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Tested-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Allocate memory for the data when it's used. Ideally the struct could
be on the stack, but we can't DMA stack memory. With this change only
the header and status memory are shared between commands, which will
allow using a tighter lock than RTNL.
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Tested-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Stop storing RSS setting in the control buffer. This is prep work for
removing RTNL lock protection of the control buffer.
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Tested-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the MT7530 DSA subdriver configures the MT7530 switch to provide
direct access to switch PHYs, meaning, the switch PHYs listen on the MDIO
bus the switch listens on. The PHY muxing feature makes use of this.
This is problematic as the PHY may be attached before the switch is
initialised, in which case, the PHY will fail to be attached.
Since commit 91374ba537bd ("net: dsa: mt7530: support OF-based registration
of switch MDIO bus"), we can describe the switch PHYs on the MDIO bus of
the switch on the device tree. Extend the check to detect PHY muxing when
the PHY is defined on the MDIO bus of the switch on the device tree.
When the PHY is described this way, the switch will be initialised first,
then the switch MDIO bus will be registered. Only after these steps, the
PHY will be attached.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20240430-b4-for-netnext-mt7530-use-switch-mdio-bus-for-phy-muxing-v2-1-9104d886d0db@arinc9.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We want to be able to run rtnl_fill_ifinfo() under RCU protection
instead of RTNL in the future.
All rtnl_link_ops->get_link_net() methods already using dev_net()
are ready. I added READ_ONCE() annotations on others.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When calling qede_flow_parse_ports(), then the
return code was only used for a non-zero check,
and then -EINVAL was returned.
qede_flow_parse_ports() can currently fail with:
* -EINVAL
This patch changes qede_flow_parse_v{4,6}_common() to
use the actual return code from qede_flow_parse_ports(),
so it's no longer assumed that all errors are -EINVAL.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When calling qede_flow_spec_validate_unused() then
the return code was only used for a non-zero check,
and then -EOPNOTSUPP was returned.
qede_flow_spec_validate_unused() can currently fail with:
* -EOPNOTSUPP
This patch changes qede_flow_spec_to_rule() to use the
actual return code from qede_flow_spec_validate_unused(),
so it's no longer assumed that all errors are -EOPNOTSUPP.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In qede_flow_spec_to_rule(), when calling
qede_parse_actions() then the return code
was only used for a non-zero check, and then
-EINVAL was returned.
qede_parse_actions() can currently fail with:
* -EINVAL
* -EOPNOTSUPP
Commit 319a1d19471e ("flow_offload: check for
basic action hw stats type") broke the implicit
assumption that it could only fail with -EINVAL,
by changing it to return -EOPNOTSUPP, when hardware
stats are requested.
However AFAICT it's not possible to trigger
qede_parse_actions() to return -EOPNOTSUPP, when
called from qede_flow_spec_to_rule(), as hardware
stats can't be requested by ethtool_rx_flow_rule_create().
This patch changes qede_flow_spec_to_rule() to use
the actual return code from qede_parse_actions(),
so it's no longer assumed that all errors are -EINVAL.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v6.10-1
* New driver for vGPIO controller on Intel Granite Rapids-D
* Update ACPI GPIO library to unify the IRQ code path
* Better GPIO IRQ line labeling for ACPI
* Switched Intel SCH driver to use "mapped" I/O accessors
The following is an automated git shortlog grouped by driver:
Add Intel Granite Rapids-D vGPIO driver:
- Add Intel Granite Rapids-D vGPIO driver
crystalcove:
- Use -ENOTSUPP consistently
gpiolib:
- acpi: Set label for IRQ only lines
- acpi: Add fwnode name to the GPIO interrupt label
- acpi: Pass con_id instead of property into acpi_dev_gpio_irq_get_by()
- acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()
- acpi: Simplify error handling in __acpi_find_gpio()
- acpi: Extract __acpi_find_gpio() helper
- acpi: Check for errors first in acpi_find_gpio()
- acpi: Remove never true check in acpi_get_gpiod_by_index()
sch:
- Utilise temporary variable for struct device
- Switch to memory mapped IO accessors
wcove:
- Use -ENOTSUPP consistently
|
|
According to GCC, the constriction of irq_name in otx2_open()
may, theoretically, be truncated.
This patch takes the approach of treating such a situation as an error
which it detects by making use of the return value of snprintf, which is
the total number of bytes, excluding the trailing '\0', that would have
been written.
Based on the approach taken to a similar problem in
commit 54b909436ede ("rtc: fix snprintf() checking in is_rtc_hctosys()")
Flagged by gcc-13 W=1 builds as:
.../otx2_pf.c:1933:58: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=]
1933 | snprintf(irq_name, NAME_SIZE, "%s-rxtx-%d", pf->netdev->name,
| ^
.../otx2_pf.c:1933:17: note: 'snprintf' output between 8 and 33 bytes into a destination of size 32
1933 | snprintf(irq_name, NAME_SIZE, "%s-rxtx-%d", pf->netdev->name,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1934 | qidx);
| ~~~~~
Compile tested only.
Tested-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240503-octeon2-pf-irq_name-truncation-v2-1-91099177b942@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The new netdev queue api is implemented for gve.
Tested-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Shailend Chand <shailend@google.com>
Link: https://lore.kernel.org/all/20240501232549.1327174-11-shailend@google.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This allows to define a GTP tunnel for dual stack MS/UE with both IPv4
and IPv6 addresses while using the same TEID via two PDP context
objects.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add new protocol field to PDP context that determines the transmit path
IP protocol to encapsulate the original packets, either IPv4 or IPv6.
Relax existing netlink attribute checks to allow to specify different
family in MS and peer attributes from the control plane.
Use build helpers to tx path to encapsulate IPv4-in-IPv6-GTP and
IPv6-in-IPv4-GTP according to the user-specified configuration.
From rx path, snoop for the inner protocol header since outer
skb->protocol might differ and use this to validate for valid PDP
context and to restore skb->protocol after decapsulation.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add routine to attach an IPv6 route for the encapsulated packet, deal
with Path MTU and push GTP header.
This helper function will be used to deal with IPv4-in-IPv6-GTP.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add routine to attach an IPv4 route for the encapsulated packet, deal
with Path MTU and push GTP header.
This helper function will be used to deal with IPv6-in-IPv4-GTP.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Based on the idea that ip_tunnel_get_dsfield() provides the tos field
regardless the IP version, use either iph->tos or ipv6_get_dsfield().
This comes in preparation to support for IPv4-in-IPv6-GTP and
IPv6-in-IPv4-GTP.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Move debugging to the routine to build GTP packets in preparation
for supporting IPv4-in-IPv6-GTP and IPv6-in-IPv4-GTP.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
According to TS 29.061, it is possible to see IPv6 link-local traffic in
the GTP tunnel, see 11.2.1.3.2 IPv6 Stateless Address Autoconfiguration
(IPv6 SLAAC).
Pass up these packets to the userspace daemon to handle them as control
GTP traffic.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Harald Welte reports that according to 3GPP TS 29.060:
PDN Connection: the association between a MS represented by one IPv4
address and/or one IPv6 prefix and a PDN represented by an APN.
this clearly states that IPv4 is a single address while IPv6 is a single prefix.
Then, 3GPP TS 29.061, Section 11.2.1.3:
For APNs that are configured for IPv6 address allocation, the GGSN/P-GW
shall only use the Prefix part of the IPv6 address for forwarding of mobile
terminated IP packets. The size of the prefix shall be according to the maximum
prefix length for a global IPv6 address as specified in the IPv6 Addressing
Architecture, see RFC 4291 [82].
RFC 4291 section 2.5.4 states
All Global Unicast addresses other than those that start with binary 000
have a 64-bit interface ID field (i.e., n + m = 64) ...
3GPP TS 29.61 Section 11.2.1.3.2a:
In the procedure in the cases of using GTP-based S5/S8, P-GW acts as an
access router, and allocates to a UE a globally unique /64 IPv6 prefix if the
PLMN allocates the prefix.
Therefore, compare IPv6 address /64 prefix only since MS/UE is not a single
address like in the IPv4 case.
Reject IPv6 address with EADDRNOTAVAIL if it lower 64 bits of the IPv6 address
from the control plane are set.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add new iflink attributes to configure in-kernel UDP listener socket
address: IFLA_GTP_LOCAL and IFLA_GTP_LOCAL6. If none of these attributes
are specified, default is still to IPv4 INADDR_ANY for backward
compatibility.
Add new attributes to set up family and IPv6 address of GTP tunnels:
GTPA_FAMILY, GTPA_PEER_ADDR6 and GTPA_MS_ADDR6. If no GTPA_FAMILY is
specified, AF_INET is assumed for backward compatibility.
setsockopt IPV6_ADDRFORM allows to downgrade socket from IPv6 to IPv4
after socket is bound. Assumption is that socket listener that is
attached to the gtp device needs to be either IPv4 or IPv6. Therefore,
GTP socket listener does not allow for IPv4-mapped-IPv6 listener.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Use union artifact to prepare for IPv6 support.
Add and use GTP_{IPV4,TH}_MAXLEN.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Currently GTP packets are dropped if the next extension field is set to
non-zero value, but this are valid GTP packets.
TS 29.281 provides a longer header format, which is defined as struct
gtp1_header_long. Such long header format is used if any of the S, PN, E
flags is set.
This long header is 4 bytes longer than struct gtp1_header, plus
variable length (optional) extension headers. The next extension header
field is zero is no extension header is provided.
The extension header is composed of a length field which includes total
number of 4 byte words including the extension header itself (1 byte),
payload (variable length) and next type (1 byte). The extension header
size and its payload is aligned to 4 bytes.
A GTP packet might come with a chain extensions headers, which makes it
slightly cumbersome to parse because the extension next header field
comes at the end of the extension header, and there is a need to check
if this field becomes zero to stop the extension header parser.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Update b20dc3c68458 ("gtp: Allow to create GTP device without FDs") to
remove useless initialization to NULL, sockets are initialized to
non-NULL just a few lines of code after this.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Refactor struct ice_vsi_cfg_params to be embedded into struct ice_vsi.
Prior to that the members of the struct were scattered around ice_vsi,
and were copy-pasted for purposes of reinit.
Now we have struct handy, and it is easier to have something sticky
in the flags field.
Suggested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Vaishnavi Tipireddy <vaishnavi.tipireddy@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
