summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-11-08Merge tag 'gpio-updates-for-v5.16' of ↵Linus Torvalds4-238/+9
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "We have a single new driver, new features in others and some cleanups all over the place. Nothing really stands out and it is all relatively small. - new driver: gpio-modepin (plus relevant change in zynqmp firmware) - add interrupt support to gpio-virtio - enable the 'gpio-line-names' property in the DT bindings for gpio-rockchip - use the subsystem helpers where applicable in gpio-uniphier instead of accessing IRQ structures directly - code shrink in gpio-xilinx - add interrupt to gpio-mlxbf2 (and include the removal of custom interrupt code from the mellanox ethernet driver) - support multiple interrupts per bank in gpio-tegra186 (and force one interrupt per bank in older models) - fix GPIO line IRQ offset calculation in gpio-realtek-otto - drop unneeded MODULE_ALIAS expansions in multiple drivers - code cleanup in gpio-aggregator - minor improvements in gpio-max730x and gpio-mc33880 - Kconfig cleanups" * tag 'gpio-updates-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: virtio_gpio: drop packed attribute gpio: virtio: Add IRQ support gpio: realtek-otto: fix GPIO line IRQ offset gpio: clean up Kconfig file net: mellanox: mlxbf_gige: Replace non-standard interrupt handling gpio: mlxbf2: Introduce IRQ support gpio: mc33880: Drop if with an always false condition gpio: max730x: Make __max730x_remove() return void gpio: aggregator: Wrap access to gpiochip_fwd.tmp[] gpio: modepin: Add driver support for modepin GPIO controller dt-bindings: gpio: zynqmp: Add binding documentation for modepin firmware: zynqmp: Add MMIO read and write support for PS_MODE pin gpio: tps65218: drop unneeded MODULE_ALIAS gpio: max77620: drop unneeded MODULE_ALIAS gpio: xilinx: simplify getting .driver_data gpio: tegra186: Support multiple interrupts per bank gpio: tegra186: Force one interrupt per bank gpio: uniphier: Use helper functions to get private data from IRQ data gpio: uniphier: Use helper function to get IRQ hardware number dt-bindings: gpio: add gpio-line-names to rockchip,gpio-bank.yaml
2021-11-07Merge tag 'pci-v5.16-changes' of ↵Linus Torvalds7-113/+34
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Conserve IRQs by setting up portdrv IRQs only when there are users (Jan Kiszka) - Rework and simplify _OSC negotiation for control of PCIe features (Joerg Roedel) - Remove struct pci_dev.driver pointer since it's redundant with the struct device.driver pointer (Uwe Kleine-König) Resource management: - Coalesce contiguous host bridge apertures from _CRS to accommodate BARs that cover more than one aperture (Kai-Heng Feng) Sysfs: - Check CAP_SYS_ADMIN before parsing user input (Krzysztof Wilczyński) - Return -EINVAL consistently from "store" functions (Krzysztof Wilczyński) - Use sysfs_emit() in endpoint "show" functions to avoid buffer overruns (Kunihiko Hayashi) PCIe native device hotplug: - Ignore Link Down/Up caused by resets during error recovery so endpoint drivers can remain bound to the device (Lukas Wunner) Virtualization: - Avoid bus resets on Atheros QCA6174, where they hang the device (Ingmar Klein) - Work around Pericom PI7C9X2G switch packet drop erratum by using store and forward mode instead of cut-through (Nathan Rossi) - Avoid trying to enable AtomicOps on VFs; the PF setting applies to all VFs (Selvin Xavier) MSI: - Document that /sys/bus/pci/devices/.../irq contains the legacy INTx interrupt or the IRQ of the first MSI (not MSI-X) vector (Barry Song) VPD: - Add pci_read_vpd_any() and pci_write_vpd_any() to access anywhere in the possible VPD space; use these to simplify the cxgb3 driver (Heiner Kallweit) Peer-to-peer DMA: - Add (not subtract) the bus offset when calculating DMA address (Wang Lu) ASPM: - Re-enable LTR at Downstream Ports so they don't report Unsupported Requests when reset or hot-added devices send LTR messages (Mingchuang Qiao) Apple PCIe controller driver: - Add driver for Apple M1 PCIe controller (Alyssa Rosenzweig, Marc Zyngier) Cadence PCIe controller driver: - Return success when probe succeeds instead of falling into error path (Li Chen) HiSilicon Kirin PCIe controller driver: - Reorganize PHY logic and add support for external PHY drivers (Mauro Carvalho Chehab) - Support PERST# GPIOs for HiKey970 external PEX 8606 bridge (Mauro Carvalho Chehab) - Add Kirin 970 support (Mauro Carvalho Chehab) - Make driver removable (Mauro Carvalho Chehab) Intel VMD host bridge driver: - If IOMMU supports interrupt remapping, leave VMD MSI-X remapping enabled (Adrian Huang) - Number each controller so we can tell them apart in /proc/interrupts (Chunguang Xu) - Avoid building on UML because VMD depends on x86 bare metal APIs (Johannes Berg) Marvell Aardvark PCIe controller driver: - Define macros for PCI_EXP_DEVCTL_PAYLOAD_* (Pali Rohár) - Set Max Payload Size to 512 bytes per Marvell spec (Pali Rohár) - Downgrade PIO Response Status messages to debug level (Marek Behún) - Preserve CRS SV (Config Request Retry Software Visibility) bit in emulated Root Control register (Pali Rohár) - Fix issue in configuring reference clock (Pali Rohár) - Don't clear status bits for masked interrupts (Pali Rohár) - Don't mask unused interrupts (Pali Rohár) - Avoid code repetition in advk_pcie_rd_conf() (Marek Behún) - Retry config accesses on CRS response (Pali Rohár) - Simplify emulated Root Capabilities initialization (Pali Rohár) - Fix several link training issues (Pali Rohár) - Fix link-up checking via LTSSM (Pali Rohár) - Fix reporting of Data Link Layer Link Active (Pali Rohár) - Fix emulation of W1C bits (Marek Behún) - Fix MSI domain .alloc() method to return zero on success (Marek Behún) - Read entire 16-bit MSI vector in MSI handler, not just low 8 bits (Marek Behún) - Clear Root Port I/O Space, Memory Space, and Bus Master Enable bits at startup; PCI core will set those as necessary (Pali Rohár) - When operating as a Root Port, set class code to "PCI Bridge" instead of the default "Mass Storage Controller" (Pali Rohár) - Add emulation for PCI_BRIDGE_CTL_BUS_RESET since aardvark doesn't implement this per spec (Pali Rohár) - Add emulation of option ROM BAR since aardvark doesn't implement this per spec (Pali Rohár) MediaTek MT7621 PCIe controller driver: - Add MediaTek MT7621 PCIe host controller driver and DT binding (Sergio Paracuellos) Qualcomm PCIe controller driver: - Add SC8180x compatible string (Bjorn Andersson) - Add endpoint controller driver and DT binding (Manivannan Sadhasivam) - Restructure to use of_device_get_match_data() (Prasad Malisetty) - Add SC7280-specific pcie_1_pipe_clk_src handling (Prasad Malisetty) Renesas R-Car PCIe controller driver: - Remove unnecessary includes (Geert Uytterhoeven) Rockchip DesignWare PCIe controller driver: - Add DT binding (Simon Xue) Socionext UniPhier Pro5 controller driver: - Serialize INTx masking/unmasking (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Run dwc .host_init() method before registering MSI interrupt handler so we can deal with pending interrupts left by bootloader (Bjorn Andersson) - Clean up Kconfig dependencies (Andy Shevchenko) - Export symbols to allow more modular drivers (Luca Ceresoli) TI DRA7xx PCIe controller driver: - Allow host and endpoint drivers to be modules (Luca Ceresoli) - Enable external clock if present (Luca Ceresoli) TI J721E PCIe driver: - Disable PHY when probe fails after initializing it (Christophe JAILLET) MicroSemi Switchtec management driver: - Return error to application when command execution fails because an out-of-band reset has cleared the device BARs, Memory Space Enable, etc (Kelvin Cao) - Fix MRPC error status handling issue (Kelvin Cao) - Mask out other bits when reading of management VEP instance ID (Kelvin Cao) - Return EOPNOTSUPP instead of ENOTSUPP from sysfs show functions (Kelvin Cao) - Add check of event support (Logan Gunthorpe) Miscellaneous: - Remove unused pci_pool wrappers, which have been replaced by dma_pool (Cai Huoqing) - Use 'unsigned int' instead of bare 'unsigned' (Krzysztof Wilczyński) - Use kstrtobool() directly, sans strtobool() wrapper (Krzysztof Wilczyński) - Fix some sscanf(), sprintf() format mismatches (Krzysztof Wilczyński) - Update PCI subsystem information in MAINTAINERS (Krzysztof Wilczyński) - Correct some misspellings (Krzysztof Wilczyński)" * tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (137 commits) PCI: Add ACS quirk for Pericom PI7C9X2G switches PCI: apple: Configure RID to SID mapper on device addition iommu/dart: Exclude MSI doorbell from PCIe device IOVA range PCI: apple: Implement MSI support PCI: apple: Add INTx and per-port interrupt support PCI: kirin: Allow removing the driver PCI: kirin: De-init the dwc driver PCI: kirin: Disable clkreq during poweroff sequence PCI: kirin: Move the power-off code to a common routine PCI: kirin: Add power_off support for Kirin 960 PHY PCI: kirin: Allow building it as a module PCI: kirin: Add MODULE_* macros PCI: kirin: Add Kirin 970 compatible PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge PCI: apple: Set up reference clocks when probing PCI: apple: Add initial hardware bring-up PCI: of: Allow matching of an interrupt-map local to a PCI device of/irq: Allow matching of an interrupt-map local to an interrupt controller irqdomain: Make of_phandle_args_to_fwspec() generally available PCI: Do not enable AtomicOps on VFs ...
2021-11-05Merge branch 'pci/vpd'Bjorn Helgaas3-109/+29
- Add pci_read_vpd_any(), pci_write_vpd_any() to access VPD at arbitrary offsets (Heiner Kallweit) - Use VPD API to replace custom code in cxgb3 driver (Heiner Kallweit) * pci/vpd: cxgb3: Remove seeprom_write and use VPD API cxgb3: Use VPD API in t3_seeprom_wp() cxgb3: Remove t3_seeprom_read and use VPD API PCI/VPD: Use pci_read_vpd_any() in pci_vpd_size() PCI/VPD: Add pci_read/write_vpd_any()
2021-11-04Merge tag 'tty-5.16-rc1' of ↵Linus Torvalds5-15/+11
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of tty and serial driver updates for 5.16-rc1. Nothing major in here at all, just lots of tiny serial and tty driver updates for various reported things, and some good cleanups. These include: - more good tty api cleanups from Jiri - stm32 serial driver updates - softlockup fix for non-preempt systems under high serial load - rpmsg serial driver update - 8250 drivers updates and fixes - n_gsm line discipline fixes and updates as people are finally starting to use it. All of these have been in linux-next for a while now with no reported issues" * tag 'tty-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (86 commits) tty: Fix extra "not" in TTY_DRIVER_REAL_RAW description serial: cpm_uart: Protect udbg definitions by CONFIG_SERIAL_CPM_CONSOLE tty: rpmsg: Define tty name via constant string literal tty: rpmsg: Add pr_fmt() to prefix messages tty: rpmsg: Use dev_err_probe() in ->probe() tty: rpmsg: Unify variable used to keep an error code tty: rpmsg: Assign returned id to a local variable serial: stm32: push DMA RX data before suspending serial: stm32: terminate / restart DMA transfer at suspend / resume serial: stm32: rework RX dma initialization and release serial: 8250_pci: Remove empty stub pci_quatech_exit() serial: 8250_pci: Replace custom pci_match_id() implementation serial: xilinx_uartps: Fix race condition causing stuck TX serial: sunzilog: Mark sunzilog_putchar() __maybe_unused Revert "tty: hvc: pass DMA capable memory to put_chars()" Revert "virtio-console: remove unnecessary kmemdup()" serial: 8250_pci: Replace dev_*() by pci_*() macros serial: 8250_pci: Get rid of redundant 'else' keyword serial: 8250_pci: Refactor the loop in pci_ite887x_init() tty: add rpmsg driver ...
2021-11-04Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-1/+3
Pull virtio updates from Michael Tsirkin: "vhost and virtio fixes and features: - Hardening work by Jason - vdpa driver for Alibaba ENI - Performance tweaks for virtio blk - virtio rng rework using an internal buffer - mac/mtu programming for mlx5 vdpa - Misc fixes, cleanups" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (45 commits) vdpa/mlx5: Forward only packets with allowed MAC address vdpa/mlx5: Support configuration of MAC vdpa/mlx5: Fix clearing of VIRTIO_NET_F_MAC feature bit vdpa_sim_net: Enable user to set mac address and mtu vdpa: Enable user to set mac and mtu of vdpa device vdpa: Use kernel coding style for structure comments vdpa: Introduce query of device config layout vdpa: Introduce and use vdpa device get, set config helpers virtio-scsi: don't let virtio core to validate used buffer length virtio-blk: don't let virtio core to validate used length virtio-net: don't let virtio core to validate used length virtio_ring: validate used buffer length virtio_blk: correct types for status handling virtio_blk: allow 0 as num_request_queues i2c: virtio: Add support for zero-length requests virtio-blk: fixup coccinelle warnings virtio_ring: fix typos in vring_desc_extra virtio-pci: harden INTX interrupts virtio_pci: harden MSI-X interrupts virtio_config: introduce a new .enable_cbs method ...
2021-11-03Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds2-16/+9
Pull rdma updates from Jason Gunthorpe: "A typical collection of patches this cycle, mostly fixing with a few new features: - Fixes from static tools. clang warnings, dead code, unused variable, coccinelle sweeps, etc - Driver bug fixes and minor improvements in rxe, bnxt_re, hfi1, mlx5, irdma, qedr - rtrs ULP bug fixes an improvments - Additional counters for bnxt_re - Support verbs CQ notifications in EFA - Continued reworking and fixing of rxe - netlink control to enable/disable optional device counters - rxe now can use AH objects for its UD path, fixing various bugs in the process - Add DMABUF support to EFA" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (103 commits) RDMA/core: Require the driver to set the IOVA correctly during rereg_mr RDMA/bnxt_re: Remove unsupported bnxt_re_modify_ah callback RDMA/irdma: optimize rx path by removing unnecessary copy RDMA/qed: Use helper function to set GUIDs RDMA/hns: Use the core code to manage the fixed mmap entries IB/opa_vnic: Rebranding of OPA VNIC driver to Cornelis Networks IB/qib: Rebranding of qib driver to Cornelis Networks IB/hfi1: Rebranding of hfi1 driver to Cornelis Networks RDMA/bnxt_re: Use helper function to set GUIDs RDMA/bnxt_re: Fix kernel panic when trying to access bnxt_re_stat_descs RDMA/qedr: Fix NULL deref for query_qp on the GSI QP RDMA/hns: Modify the value of MAX_LP_MSG_LEN to meet hardware compatibility RDMA/hns: Fix initial arm_st of CQ RDMA/rxe: Make rxe_type_info static const RDMA/rxe: Use 'bitmap_zalloc()' when applicable RDMA/rxe: Save a few bytes from struct rxe_pool RDMA/irdma: Remove the unused variable local_qp RDMA/core: Fix missed initialization of rdma_hw_stats::lock RDMA/efa: Add support for dmabuf memory regions RDMA/umem: Allow pinned dmabuf umem usage ...
2021-11-02Merge tag 'hyperv-next-signed-20211102' of ↵Linus Torvalds2-10/+10
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - Initial patch set for Hyper-V isolation VM support (Tianyu Lan) - Fix a warning on preemption (Vitaly Kuznetsov) - A bunch of misc cleanup patches * tag 'hyperv-next-signed-20211102' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Protect set_hv_tscchange_cb() against getting preempted Drivers: hv : vmbus: Adding NULL pointer check x86/hyperv: Remove duplicate include x86/hyperv: Remove duplicated include in hv_init Drivers: hv: vmbus: Remove unused code to check for subchannels Drivers: hv: vmbus: Initialize VMbus ring buffer for Isolation VM Drivers: hv: vmbus: Add SNP support for VMbus channel initiate message x86/hyperv: Add ghcb hvcall support for SNP VM x86/hyperv: Add Write/Read MSR registers via ghcb page Drivers: hv: vmbus: Mark vmbus ring buffer visible to host in Isolation VM x86/hyperv: Add new hvcall guest address host visibility support x86/hyperv: Initialize shared memory boundary in the Isolation VM. x86/hyperv: Initialize GHCB page in Isolation VM
2021-11-02Merge tag 'net-next-for-5.16' of ↵Linus Torvalds1269-27244/+163746
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Remove socket skb caches - Add a SO_RESERVE_MEM socket op to forward allocate buffer space and avoid memory accounting overhead on each message sent - Introduce managed neighbor entries - added by control plane and resolved by the kernel for use in acceleration paths (BPF / XDP right now, HW offload users will benefit as well) - Make neighbor eviction on link down controllable by userspace to work around WiFi networks with bad roaming implementations - vrf: Rework interaction with netfilter/conntrack - fq_codel: implement L4S style ce_threshold_ect1 marking - sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap() BPF: - Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging as implemented in LLVM14 - Introduce bpf_get_branch_snapshot() to capture Last Branch Records - Implement variadic trace_printk helper - Add a new Bloomfilter map type - Track <8-byte scalar spill and refill - Access hw timestamp through BPF's __sk_buff - Disallow unprivileged BPF by default - Document BPF licensing Netfilter: - Introduce egress hook for looking at raw outgoing packets - Allow matching on and modifying inner headers / payload data - Add NFT_META_IFTYPE to match on the interface type either from ingress or egress Protocols: - Multi-Path TCP: - increase default max additional subflows to 2 - rework forward memory allocation - add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS - MCTP flow support allowing lower layer drivers to configure msg muxing as needed - Automatic Multicast Tunneling (AMT) driver based on RFC7450 - HSR support the redbox supervision frames (IEC-62439-3:2018) - Support for the ip6ip6 encapsulation of IOAM - Netlink interface for CAN-FD's Transmitter Delay Compensation - Support SMC-Rv2 eliminating the current same-subnet restriction, by exploiting the UDP encapsulation feature of RoCE adapters - TLS: add SM4 GCM/CCM crypto support - Bluetooth: initial support for link quality and audio/codec offload Driver APIs: - Add a batched interface for RX buffer allocation in AF_XDP buffer pool - ethtool: Add ability to control transceiver modules' power mode - phy: Introduce supported interfaces bitmap to express MAC capabilities and simplify PHY code - Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks New drivers: - WiFi driver for Realtek 8852AE 802.11ax devices (rtw89) - Ethernet driver for ASIX AX88796C SPI device (x88796c) Drivers: - Broadcom PHYs - support 72165, 7712 16nm PHYs - support IDDQ-SR for additional power savings - PHY support for QCA8081, QCA9561 PHYs - NXP DPAA2: support for IRQ coalescing - NXP Ethernet (enetc): support for software TCP segmentation - Renesas Ethernet (ravb) - support DMAC and EMAC blocks of Gigabit-capable IP found on RZ/G2L SoC - Intel 100G Ethernet - support for eswitch offload of TC/OvS flow API, including offload of GRE, VxLAN, Geneve tunneling - support application device queues - ability to assign Rx and Tx queues to application threads - PTP and PPS (pulse-per-second) extensions - Broadcom Ethernet (bnxt) - devlink health reporting and device reload extensions - Mellanox Ethernet (mlx5) - offload macvlan interfaces - support HW offload of TC rules involving OVS internal ports - support HW-GRO and header/data split - support application device queues - Marvell OcteonTx2: - add XDP support for PF - add PTP support for VF - Qualcomm Ethernet switch (qca8k): support for QCA8328 - Realtek Ethernet DSA switch (rtl8366rb) - support bridge offload - support STP, fast aging, disabling address learning - support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch - Mellanox Ethernet/IB switch (mlxsw) - multi-level qdisc hierarchy offload (e.g. RED, prio and shaping) - offload root TBF qdisc as port shaper - support multiple routing interface MAC address prefixes - support for IP-in-IP with IPv6 underlay - MediaTek WiFi (mt76) - mt7921 - ASPM, 6GHz, SDIO and testmode support - mt7915 - LED and TWT support - Qualcomm WiFi (ath11k) - include channel rx and tx time in survey dump statistics - support for 80P80 and 160 MHz bandwidths - support channel 2 in 6 GHz band - spectral scan support for QCN9074 - support for rx decapsulation offload (data frames in 802.3 format) - Qualcomm phone SoC WiFi (wcn36xx) - enable Idle Mode Power Save (IMPS) to reduce power consumption during idle - Bluetooth driver support for MediaTek MT7922 and MT7921 - Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and Realtek 8822C/8852A - Microsoft vNIC driver (mana) - support hibernation and kexec - Google vNIC driver (gve) - support for jumbo frames - implement Rx page reuse Refactor: - Make all writes to netdev->dev_addr go thru helpers, so that we can add this address to the address rbtree and handle the updates - Various TCP cleanups and optimizations including improvements to CPU cache use - Simplify the gnet_stats, Qdisc stats' handling and remove qdisc->running sequence counter - Driver changes and API updates to address devlink locking deficiencies" * tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits) Revert "net: avoid double accounting for pure zerocopy skbs" selftests: net: add arp_ndisc_evict_nocarrier net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter net: arp: introduce arp_evict_nocarrier sysctl parameter libbpf: Deprecate AF_XDP support kbuild: Unify options for BTF generation for vmlinux and modules selftests/bpf: Add a testcase for 64-bit bounds propagation issue. bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit. bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off. net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c net: avoid double accounting for pure zerocopy skbs tcp: rename sk_wmem_free_skb netdevsim: fix uninit value in nsim_drv_configure_vfs() selftests/bpf: Fix also no-alu32 strobemeta selftest bpf: Add missing map_delete_elem method to bloom filter map selftests/bpf: Add bloom map success test for userspace calls bpf: Add alignment padding for "map_extra" + consolidate holes bpf: Bloom filter map naming fixups selftests/bpf: Add test cases for struct_ops prog bpf: Add dummy BPF STRUCT_OPS for test purpose ...
2021-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski5-17/+42
Merge in the fixes we had queued in case there was another -rc. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-02Merge tag 'overflow-v5.16-rc1' of ↵Linus Torvalds10-59/+72
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull overflow updates from Kees Cook: "The end goal of the current buffer overflow detection work[0] is to gain full compile-time and run-time coverage of all detectable buffer overflows seen via array indexing or memcpy(), memmove(), and memset(). The str*() family of functions already have full coverage. While much of the work for these changes have been on-going for many releases (i.e. 0-element and 1-element array replacements, as well as avoiding false positives and fixing discovered overflows[1]), this series contains the foundational elements of several related buffer overflow detection improvements by providing new common helpers and FORTIFY_SOURCE changes needed to gain the introspection required for compiler visibility into array sizes. Also included are a handful of already Acked instances using the helpers (or related clean-ups), with many more waiting at the ready to be taken via subsystem-specific trees[2]. The new helpers are: - struct_group() for gaining struct member range introspection - memset_after() and memset_startat() for clearing to the end of structures - DECLARE_FLEX_ARRAY() for using flex arrays in unions or alone in structs Also included is the beginning of the refactoring of FORTIFY_SOURCE to support memcpy() introspection, fix missing and regressed coverage under GCC, and to prepare to fix the currently broken Clang support. Finishing this work is part of the larger series[0], but depends on all the false positives and buffer overflow bug fixes to have landed already and those that depend on this series to land. As part of the FORTIFY_SOURCE refactoring, a set of both a compile-time and run-time tests are added for FORTIFY_SOURCE and the mem*()-family functions respectively. The compile time tests have found a legitimate (though corner-case) bug[6] already. Please note that the appearance of "panic" and "BUG" in the FORTIFY_SOURCE refactoring are the result of relocating existing code, and no new use of those code-paths are expected nor desired. Finally, there are two tree-wide conversions for 0-element arrays and flexible array unions to gain sane compiler introspection coverage that result in no known object code differences. After this series (and the changes that have now landed via netdev and usb), we are very close to finally being able to build with -Warray-bounds and -Wzero-length-bounds. However, due corner cases in GCC[3] and Clang[4], I have not included the last two patches that turn on these options, as I don't want to introduce any known warnings to the build. Hopefully these can be solved soon" Link: https://lore.kernel.org/lkml/20210818060533.3569517-1-keescook@chromium.org/ [0] Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/log/?qt=grep&q=FORTIFY_SOURCE [1] Link: https://lore.kernel.org/lkml/202108220107.3E26FE6C9C@keescook/ [2] Link: https://lore.kernel.org/lkml/3ab153ec-2798-da4c-f7b1-81b0ac8b0c5b@roeck-us.net/ [3] Link: https://bugs.llvm.org/show_bug.cgi?id=51682 [4] Link: https://lore.kernel.org/lkml/202109051257.29B29745C0@keescook/ [5] Link: https://lore.kernel.org/lkml/20211020200039.170424-1-keescook@chromium.org/ [6] * tag 'overflow-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (30 commits) fortify: strlen: Avoid shadowing previous locals compiler-gcc.h: Define __SANITIZE_ADDRESS__ under hwaddress sanitizer treewide: Replace 0-element memcpy() destinations with flexible arrays treewide: Replace open-coded flex arrays in unions stddef: Introduce DECLARE_FLEX_ARRAY() helper btrfs: Use memset_startat() to clear end of struct string.h: Introduce memset_startat() for wiping trailing members and padding xfrm: Use memset_after() to clear padding string.h: Introduce memset_after() for wiping trailing members/padding lib: Introduce CONFIG_MEMCPY_KUNIT_TEST fortify: Add compile-time FORTIFY_SOURCE tests fortify: Allow strlen() and strnlen() to pass compile-time known lengths fortify: Prepare to improve strnlen() and strlen() warnings fortify: Fix dropped strcpy() compile-time write overflow check fortify: Explicitly disable Clang support fortify: Move remaining fortify helpers into fortify-string.h lib/string: Move helper functions out of string.c compiler_types.h: Remove __compiletime_object_size() cm4000_cs: Use struct_group() to zero struct cm4000_dev region can: flexcan: Use struct_group() to zero struct flexcan_regs regions ...
2021-11-02net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.cJean Sacren1-8/+2
In one if branch, (ec->rx_coalesce_usecs != 0) is checked. When it is checked again in two more places, it is always false and has no effect on the whole check expression. We should remove it in both places. In another if branch, (ec->use_adaptive_rx_coalesce != 0) is checked. When it is checked again, it is always false. We should remove the entire branch with it. In addition we might as well let C precedence dictate by getting rid of two pairs of parentheses in the neighboring lines in order to keep expressions on both sides of '||' in balance with checkpatch warning silenced. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Link: https://lore.kernel.org/r/20211031012728.8325-1-sakiwit@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-02netdevsim: fix uninit value in nsim_drv_configure_vfs()Jakub Kicinski1-4/+2
Build bot points out that I missed initializing ret after refactoring. Reported-by: kernel test robot <lkp@intel.com> Fixes: 1c401078bcf3 ("netdevsim: move details of vf config to dev") Link: https://lore.kernel.org/r/20211101221845.3188490-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-01Merge tag 'v5.15' into rdma.git for-nextJason Gunthorpe74-354/+662
Pull in the accepted for-rc patches as the next merge needs a newer base. Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-11-01amt: add mld report message handlerTaehee Yoo1-7/+440
In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01amt: add multicast(IGMP) report message handlerTaehee Yoo1-1/+1131
amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01amt: add data plane of amt interfaceTaehee Yoo1-1/+1241
Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01amt: add control plane of amt interfaceTaehee Yoo3-0/+510
It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01netdevsim: rename 'driver' entry pointsJakub Kicinski3-14/+14
Rename functions serving as driver entry points from nsim_dev_... to nsim_drv_... this makes the API boundary between bus and dev clearer. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01netdevsim: move max vf config to devJakub Kicinski3-82/+64
max_vfs is a strange little beast because the file hangs off of nsim's debugfs, but it configures a field in the bus device. Move it to dev.c, let's look at it as if the device driver was imposing VF limit based on FW info (like pci_sriov_set_totalvfs()). Again, when moving refactor the function not to hold the vfs lock pointlessly while parsing the input. Wrap the access from the read side in READ_ONCE() to appease concurrency checkers. Do not check if return value from snprintf() is negative... Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01netdevsim: move details of vf config to devJakub Kicinski3-73/+63
Since "eswitch" configuration was added bus.c contains a lot of device details which really belong to dev.c. Restructure the code while moving it. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01netdevsim: move vfconfig to nsim_devJakub Kicinski4-91/+111
When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01netdevsim: take rtnl_lock when assigning num_vfsJakub Kicinski1-3/+11
Legacy VF NDOs look at num_vfs and then based on that index into vfconfig. If we don't rtnl_lock() num_vfs may get set to 0 and vfconfig freed/replaced while the NDO is running. We don't need to protect replacing vfconfig since it's only done when num_vfs is 0. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01net: mana: Support hibernation and kexecDexuan Cui3-52/+164
Implement the suspend/resume/shutdown callbacks for hibernation/kexec. Add mana_gd_setup() and mana_gd_cleanup() for some common code, and use them in the mand_gd_* callbacks. Reuse mana_probe/remove() for the hibernation path. Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01net: mana: Improve the HWC error handlingDexuan Cui2-44/+31
Currently when the HWC creation fails, the error handling is flawed, e.g. if mana_hwc_create_channel() -> mana_hwc_establish_channel() fails, the resources acquired in mana_hwc_init_queues() is not released. Enhance mana_hwc_destroy_channel() to do the proper cleanup work and call it accordingly. Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01net: mana: Report OS info to the PF driverDexuan Cui1-0/+11
The PF driver might use the OS info for statistical purposes. Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01net: mana: Fix the netdev_err()'s vPort argument in mana_init_port()Dexuan Cui1-1/+2
Use the correct port index rather than 0. Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01ibmvnic: delay complete()Sukadev Bhattiprolu1-7/+9
If we get CRQ_INIT, we set errno to -EIO and first call complete() to notify the waiter. Then we try to schedule a FAILOVER reset. If this occurs while adapter is in PROBING state, ibmvnic_reset() changes the error code to EAGAIN and returns without scheduling the FAILOVER. The purpose of setting error code to EAGAIN is to ask the waiter to retry. But due to the earlier complete() call, the waiter may already have seen the -EIO response and decided not to retry. This can cause intermittent failures when bringing up ibmvnic adapters during boot, specially in in kexec/kdump kernels. Defer the complete() call until after scheduling the reset. Also streamline the error code to EAGAIN. Don't see why we need EIO sometimes. All 3 callers of ibmvnic_reset_init() can handle EAGAIN. Fixes: 17c8705838a5 ("ibmvnic: Return error code if init interrupted by transport event") Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01ibmvnic: Process crqs after enabling interruptsSukadev Bhattiprolu1-0/+3
Soon after registering a CRQ it is possible that we get a fail over or maybe a CRQ_INIT from the VIOS while interrupts were disabled. Look for any such CRQs after enabling interrupts. Otherwise we can intermittently fail to bring up ibmvnic adapters during boot, specially in kexec/kdump kernels. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01ibmvnic: don't stop queue in xmitSukadev Bhattiprolu1-2/+0
If adapter's resetting bit is on, discard the packet but don't stop the transmit queue - instead leave that to the reset code. With this change, it is possible that we may get several calls to ibmvnic_xmit() that simply discard packets and return. But if we stop the queue here, we might end up doing so just after __ibmvnic_open() started the queues (during a hard/soft reset) and before the ->resetting bit was cleared. If that happens, there will be no one to restart queue and transmissions will be blocked indefinitely. This can cause a TIMEOUT reset and with auto priority failover enabled, an unnecessary FAILOVER reset to less favored backing device and then a FAILOVER back to the most favored backing device. If we hit the window repeatedly, we can get stuck in a loop of TIMEOUT, FAILOVER, FAILOVER resets leaving the adapter unusable for extended periods of time. Fixes: 7f5b030830fe ("ibmvnic: Free skb's in cases of failure in transmit") Reported-by: Abdul Haleem <abdhalee@in.ibm.com> Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01nfp: flower: Allow ipv6gretap interface for offloadingYu Xiao3-3/+4
The tunnel_type check only allows for "netif_is_gretap", but for OVS the port is actually "netif_is_ip6gretap" when setting up GRE for ipv6, which means offloading request was rejected before. Therefore, adding "netif_is_ip6gretap" allow ipv6gretap interface for offloading. Signed-off-by: Yu Xiao <yu.xiao@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01Merge branch '100GbE' of ↵David S. Miller8-25/+98
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2021-10-29 This series contains updates to ice and iavf drivers and virtchnl header file. Brett removes vlan_promisc argument from a function call for ice driver. In the virtchnl header file he removes an unused, reserved define and converts raw value defines to instead use the BIT macro. Marcin adds syncing of MAC addresses when creating switchdev VFs to remove error messages on link up and stops showing buffer information for port representors to remove duplicated entries being displayed for ice driver. Karen introduces a helper to go from pci_dev to iavf_adapter in the iavf driver. Przemyslaw fixes an issue where iavf was attempting to free IRQs before calling disable. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01Merge tag 'mlx5-updates-2021-10-29' of ↵David S. Miller26-267/+1189
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2021-10-29 1) Minor trivial refactoring and improvements 2) Check for unsupported parameters fields in SW steering 3) Support TC offload for OVS internal port, from Ariel, see below. Ariel Levkovich says: ===================== Support HW offload of TC rules involving OVS internal port device type as the filter device or the destination device. The support is for flows which explicitly use the internal port as source or destination device as well as indirect offload for flows performing tunnel set or unset via a tunnel device and the internal port is the tunnel overlay device. Since flows with internal port as source port are added as egress rules while redirecting to internal port is done as an ingress redirect, the series introduces the necessary changes in mlx5_core driver to support the new types of flows and actions. ===================== ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01RDMA/qed: Use helper function to set GUIDsKamal Heib1-13/+4
Use addrconf_addr_eui48() helper function to set the GUIDs and remove the driver specific version. Link: https://lore.kernel.org/r/20211031170743.81755-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-11-01virtio-net: don't let virtio core to validate used lengthJason Wang1-0/+1
For RX virtuqueue, the used length is validated in all the three paths (big, small and mergeable). For control vq, we never tries to use used length. So this patch forbids the core to validate the used length. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20211027022107.14357-3-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01virtio_net: clarify tailroom logicMichael S. Tsirkin1-1/+2
Make tailroom math follow same logic as everything else, subtracing values in the order in which things are laid out in the buffer. Tested-by: Corentin Noël <corentin.noel@collabora.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-30Merge branch '1GbE' of ↵Jakub Kicinski4-7/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 1GbE Intel Wired LAN Driver Updates 2021-10-29 This series contains updates to igc driver only. Sasha removes an unnecessary media type check, adds a new device ID, and changes a device reset to a port reset command. ==================== Link: https://lore.kernel.org/r/20211029174101.2970935-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-30bnxt_en: Remove not used other ULP defineLeon Romanovsky1-2/+1
There is only one bnxt ULP in the upstream kernel and definition for other ULP can be safely removed. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/3a8ea720b28ec4574648012d2a00208f1144eff5.1635527693.git.leonro@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-30Merge branch '40GbE' of ↵Jakub Kicinski4-11/+18
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2021-10-29 This series contains updates to i40e, ice, igb, and ixgbevf drivers. Yang Li simplifies return statements of bool values for i40e and ice. Jan Kundrát corrects problems with I2C bit-banging for igb. Colin Ian King removes unneeded variable initialization for ixgbevf. ==================== Link: https://lore.kernel.org/r/20211029164641.2714265-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-30netdevsim: remove max_vfs dentryJakub Kicinski2-6/+3
Commit d395381909a3 ("netdevsim: Add max_vfs to bus_dev") added this file and saved the dentry for no apparent reason. Link: https://lore.kernel.org/r/20211028211753.22612-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-29net/mlx5: Support internal port as decap route deviceAriel Levkovich2-13/+40
When performing route device lookup for decap action, support the case of ovs internal port as the lookup result. In such case, an internal port struct is mapped and attached to the flow attributes so that the source port matching of the rule will match on the internal port's metadata value. Signed-off-by: Ariel Levkovich <lariel@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-29net/mlx5e: Term table handling of internal port rulesAriel Levkovich1-2/+2
Adjust termination table logic to handle rules which involve internal port as filter or forwarding device. For cases where the rule forwards from internal port to uplink, always choose to go via termination table. This is because it is not known from where the packet originally arrived to the internal port and it is possible that it came from the uplink itself, in which case a term table is required to perform hairpin. If the packet arrived from a vport, going via term table has no effect. For cases where the rule forwards to an internal port from uplink the rep pointer will point to the uplink rep, avoid going via termination table as it is not required. Signed-off-by: Ariel Levkovich <lariel@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-29net/mlx5e: Add indirect tc offload of ovs internal portAriel Levkovich4-19/+82
Register callbacks for tc blocks of ovs internal port devices. This allows an indirect offloading rules that apply on such devices as the filter device. In case a rule is added to a tc block of an internal port, the mlx5 driver will implicitly add a matching on the internal port's unique vport metadata value to the rule's matching list. Therefore, only packets that previously hit a rule that redirects to an internal port and got the vport metadata overwritten to the internal port's unique metadata, can match on such indirect rule. Offloading of both ingress and egress tc blocks of internal ports is supported as opposed to other devices where only ingress block offloading is supported. Signed-off-by: Ariel Levkovich <lariel@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-29net/mlx5e: Offload internal port as encap route deviceAriel Levkovich3-3/+41
When pefroming encap action, a route lookup is performed to find the routing device the packet should be forwarded to after the encapsulation. This is the device that has the local tunnel ip address. This change adds support to offload an encap rule where the route device ends up being an ovs internal port. In such case, the driver will add a HW rule that will encapsulate the packet with the tunnel header and will overwrite the vport metadata in reg_c0 to the internal port metadata value. Finally, the packet will be forwarded to the root table to be processed again with the indication that it came from an internal port. Signed-off-by: Ariel Levkovich <lariel@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-29net/mlx5e: Offload tc rules that redirect to ovs internal portAriel Levkovich6-4/+141
Allow offloading rules that redirect to ovs internal port ingress and egress. To support redirect to ingress device, offloading of REDIRECT_INGRESS action is added. When a tc rule redirects to ovs internal port, the hw rule will overwrite the input vport value in reg_c0 with a new vport metadata value that is mapped for this internal port using the internal port mapping api that is introduce in previous patches. After that the hw rule will redirect the packet to the root table to continue processing with the new vport metadata value. The new vport metadata value indicates that this packet is now arriving through an internal port and therefore should be processed using rules that apply on the same internal port as the filter device. Therefore, following rules that apply on this internal port will have to match on the same vport metadata value as part of their matching keys to make sure the packet belongs to the internal port. Signed-off-by: Ariel Levkovich <lariel@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-29net/mlx5e: Accept action skbedit in the tc actions listAriel Levkovich1-0/+7
Setting the skb packet type field to host is usually done when performing forwarding to ingress device. This is required since the receive handling that is used by the redirect to ingress action checks whether the packet doesn't belong to this host and drops the packet in such case. In order to be able to offload action redirect ingress, tc offload code needs to accept the skbedit ptype action as well. There's no special handling in HW for such action since it will be followed by a redirect action and therefore, this code only allows us to accept such action in the actions list but not performing anything specific in HW for it. Signed-off-by: Ariel Levkovich <lariel@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-29net/mlx5: E-Switch, Add ovs internal port mapping to metadata supportAriel Levkovich11-9/+607
Adding infrastructure to map ovs internal port device to vport match metadata to support offload of rules with internal port as the filter device or as the destination device. The infrastructure allows adding and removing internal port device to an eswitch database and getting a unique vport metadata value to be placed and match on in reg_c0 when offloading rules that are coming from or going to an internal port. The new int port metadata can be written to the source port register in HW to indicate that current source port of the packet is the internal port and not one of the actual HW vports (uplink or VF). Using this method, it is possible to offload TC rules with an OVS internal port as their destination port (overwriting the src vport register) or as the filter port (matching on the value of the src vport register and making sure it matches to the internal port's value). There is also a need to handle a miss case where the packet's src port value was changed in HW to an internal port but a following rule which matches on this new src port value wasn't found in HW. In such case, the packet will be forwarded to the driver with metadata which allows driver to restore the info of the internal port's netdevice. Once this info is restored, the uplink driver can forward the packet to the relevant netdevice in SW. Signed-off-by: Ariel Levkovich <lariel@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-29net/mlx5e: Use generic name for the forwarding dev pointerAriel Levkovich2-5/+5
Rename tun_dev to fwd_dev within mlx5e_tc_update_priv struct since future implementation may introduce other device types which the handler is forwarding to. Signed-off-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-29net/mlx5e: Refactor rx handler of represetor deviceAriel Levkovich4-45/+32
Move the ownership of skb forwarding to network stack to the tc update_skb handler as different cases will require different handling of the skb. While the tc handler will take care of the various cases and properly handle the handover of the skb to the network stack and freeing the skb, the main rx handler will be kept clean from branches and usage of flags. Signed-off-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-29net/mlx5: DR, Add check for unsupported fields in match paramMuhammad Sammar4-133/+172
When a matcher is being built, we "consume" (clear) mask fields one by one, and to verify that we do support all the required fields we check if the whole mask was consumed, else the matching request includes unsupported fields. Signed-off-by: Muhammad Sammar <muhammads@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
2021-10-29net/mlx5: Allow skipping counter refresh on creationPaul Blakey2-4/+12
CT creates a counter for each CT rule, and for each such counter, fs_counters tries to queue mlx5_fc_stats_work() work again via mod_delayed_work(0) call to refresh all counters. This call has a large performance impact when reaching high insertion rate and accounts for ~8% of the insertion time when using software steering. Allow skipping the refresh of all counters during counter creation. Change CT to use this refresh skipping for it's counters. Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-04 03:44:31 +0300