summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2022-07-28stmmac: dwmac-mediatek: fix resource leak in probeDan Carpenter1-4/+5
If mediatek_dwmac_clks_config() fails, then call stmmac_remove_config_dt() before returning. Otherwise it is a resource leak. Fixes: fa4b3ca60e80 ("stmmac: dwmac-mediatek: fix clock issue") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YuJ4aZyMUlG6yGGa@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28net/funeth: Fix fun_xdp_tx() and XDP packet reclaimDimitris Michailidis3-15/+16
The current implementation of fun_xdp_tx(), used for XPD_TX, is incorrect in that it takes an address/length pair and later releases it with page_frag_free(). It is OK for XDP_TX but the same code is used by ndo_xdp_xmit. In that case it loses the XDP memory type and releases the packet incorrectly for some of the types. Assorted breakage follows. Change fun_xdp_tx() to take xdp_frame and rely on xdp_return_frame() in reclaim. Fixes: db37bc177dae ("net/funeth: add the data path") Signed-off-by: Dimitris Michailidis <dmichail@fungible.com> Link: https://lore.kernel.org/r/20220726215923.7887-1-dmichail@fungible.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-28Merge branch '100GbE' of ↵Jakub Kicinski5-48/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-07-26 This series contains updates to ice driver only. Przemyslaw corrects accounting for VF VLANs to allow for correct number of VLANs for untrusted VF. He also correct issue with checksum offload on VXLAN tunnels. Ani allows for two VSIs to share the same MAC address. Maciej corrects checked bits for descriptor completion of loopback * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: do not setup vlan for loopback VSI ice: check (DD | EOF) bits on Rx descriptor rather than (EOP | RS) ice: Fix VSIs unable to share unicast MAC ice: Fix tunnel checksum offload with fragmented traffic ice: Fix max VLANs available for VF ==================== Link: https://lore.kernel.org/r/20220726204646.2171589-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28sfc: disable softirqs for ptp TXAlejandro Lucero1-0/+22
Sending a PTP packet can imply to use the normal TX driver datapath but invoked from the driver's ptp worker. The kernel generic TX code disables softirqs and preemption before calling specific driver TX code, but the ptp worker does not. Although current ptp driver functionality does not require it, there are several reasons for doing so: 1) The invoked code is always executed with softirqs disabled for non PTP packets. 2) Better if a ptp packet transmission is not interrupted by softirq handling which could lead to high latencies. 3) netdev_xmit_more used by the TX code requires preemption to be disabled. Indeed a solution for dealing with kernel preemption state based on static kernel configuration is not possible since the introduction of dynamic preemption level configuration at boot time using the static calls functionality. Fixes: f79c957a0b537 ("drivers: net: sfc: use netdev_xmit_more helper") Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com> Link: https://lore.kernel.org/r/20220726064504.49613-1-alejandro.lucero-palau@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-27virtio-net: fix the race between refill work and closeJason Wang1-3/+34
We try using cancel_delayed_work_sync() to prevent the work from enabling NAPI. This is insufficient since we don't disable the source of the refill work scheduling. This means an NAPI poll callback after cancel_delayed_work_sync() can schedule the refill work then can re-enable the NAPI that leads to use-after-free [1]. Since the work can enable NAPI, we can't simply disable NAPI before calling cancel_delayed_work_sync(). So fix this by introducing a dedicated boolean to control whether or not the work could be scheduled from NAPI. [1] ================================================================== BUG: KASAN: use-after-free in refill_work+0x43/0xd4 Read of size 2 at addr ffff88810562c92e by task kworker/2:1/42 CPU: 2 PID: 42 Comm: kworker/2:1 Not tainted 5.19.0-rc1+ #480 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: events refill_work Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report.cold+0xbb/0x6ac ? _printk+0xad/0xde ? refill_work+0x43/0xd4 kasan_report+0xa8/0x130 ? refill_work+0x43/0xd4 refill_work+0x43/0xd4 process_one_work+0x43d/0x780 worker_thread+0x2a0/0x6f0 ? process_one_work+0x780/0x780 kthread+0x167/0x1a0 ? kthread_exit+0x50/0x50 ret_from_fork+0x22/0x30 </TASK> ... Fixes: b2baed69e605c ("virtio_net: set/cancel work on ndo_open/ndo_stop") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-26ice: do not setup vlan for loopback VSIMaciej Fijalkowski1-3/+5
Currently loopback test is failiing due to the error returned from ice_vsi_vlan_setup(). Skip calling it when preparing loopback VSI. Fixes: 0e674aeb0b77 ("ice: Add handler for ethtool selftest") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26ice: check (DD | EOF) bits on Rx descriptor rather than (EOP | RS)Maciej Fijalkowski1-1/+2
Tx side sets EOP and RS bits on descriptors to indicate that a particular descriptor is the last one and needs to generate an irq when it was sent. These bits should not be checked on completion path regardless whether it's the Tx or the Rx. DD bit serves this purpose and it indicates that a particular descriptor is either for Rx or was successfully Txed. EOF is also set as loopback test does not xmit fragmented frames. Look at (DD | EOF) bits setting in ice_lbtest_receive_frames() instead of EOP and RS pair. Fixes: 0e674aeb0b77 ("ice: Add handler for ethtool selftest") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26ice: Fix VSIs unable to share unicast MACAnirudh Venkataramanan2-40/+2
The driver currently does not allow two VSIs in the same PF domain to have the same unicast MAC address. This is incorrect in the sense that a policy decision is being made in the driver when it must be left to the user. This approach was causing issues when rebooting the system with VFs spawned not being able to change their MAC addresses. Such errors were present in dmesg: [ 7921.068237] ice 0000:b6:00.2 ens2f2: Unicast MAC 6a:0d:e4:70:ca:d1 already exists on this PF. Preventing setting VF 7 unicast MAC address to 6a:0d:e4:70:ca:d1 Fix that by removing this restriction. Doing this also allows us to remove some additional code that's checking if a unicast MAC filter already exists. Fixes: 47ebc7b02485 ("ice: Check if unicast MAC exists before setting VF MAC") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26ice: Fix tunnel checksum offload with fragmented trafficPrzemyslaw Patynowski1-3/+5
Fix checksum offload on VXLAN tunnels. In case, when mpls protocol is not used, set l4 header to transport header of skb. This fixes case, when user tries to offload checksums of VXLAN tunneled traffic. Steps for reproduction (requires link partner with tunnels): ip l s enp130s0f0 up ip a f enp130s0f0 ip a a 10.10.110.2/24 dev enp130s0f0 ip l s enp130s0f0 mtu 1600 ip link add vxlan12_sut type vxlan id 12 group 238.168.100.100 dev enp130s0f0 dstport 4789 ip l s vxlan12_sut up ip a a 20.10.110.2/24 dev vxlan12_sut iperf3 -c 20.10.110.1 #should connect Offload params: td_offset, cd_tunnel_params were corrupted, due to l4 header pointing wrong address. NIC would then drop those packets internally, due to incorrect TX descriptor data, which increased GLV_TEPC register. Fixes: 69e66c04c672 ("ice: Add mpls+tso support") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26ice: Fix max VLANs available for VFPrzemyslaw Patynowski1-1/+2
Legacy VLAN implementation allows for untrusted VF to have 8 VLAN filters, not counting VLAN 0 filters. Current VLAN_V2 implementation lowers available filters for VF, by counting in VLAN 0 filter for both TPIDs. Fix this by counting only non zero VLAN filters. Without this patch, untrusted VF would not be able to access 8 VLAN filters. Fixes: cc71de8fa133 ("ice: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26octeontx2-pf: Fix UDP/TCP src and dst port tc filtersSubbaraya Sundeep1-12/+18
Check the mask for non-zero value before installing tc filters for L4 source and destination ports. Otherwise installing a filter for source port installs destination port too and vice-versa. Fixes: 1d4d9e42c240 ("octeontx2-pf: Add tc flower hardware offload on ingress traffic") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-26octeontx2-pf: cn10k: Fix egress ratelimit configurationSunil Goutham1-21/+55
NIX_AF_TLXX_PIR/CIR register format has changed from OcteonTx2 to CN10K. CN10K supports larger burst size. Fix burst exponent and burst mantissa configuration for CN10K. Also fixed 'maxrate' from u32 to u64 since 'police.rate_bytes_ps' passed by stack is also u64. Fixes: e638a83f167e ("octeontx2-pf: TC_MATCHALL egress ratelimiting offload") Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-26i40e: Fix interface init with MSI interrupts (no MSI-X)Michal Maloszewski1-0/+4
Fix the inability to bring an interface up on a setup with only MSI interrupts enabled (no MSI-X). Solution is to add a default number of QPs = 1. This is enough, since without MSI-X support driver enables only a basic feature set. Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use") Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com> Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220722175401.112572-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-25net: macsec: fix potential resource leak in macsec_add_rxsa() and ↵Jianglei Nie1-2/+2
macsec_add_txsa() init_rx_sa() allocates relevant resource for rx_sa->stats and rx_sa-> key.tfm with alloc_percpu() and macsec_alloc_tfm(). When some error occurs after init_rx_sa() is called in macsec_add_rxsa(), the function released rx_sa with kfree() without releasing rx_sa->stats and rx_sa-> key.tfm, which will lead to a resource leak. We should call macsec_rxsa_put() instead of kfree() to decrease the ref count of rx_sa and release the relevant resource if the refcount is 0. The same bug exists in macsec_add_txsa() for tx_sa as well. This patch fixes the above two bugs. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25macsec: always read MACSEC_SA_ATTR_PN as a u64Sabrina Dubroca1-3/+3
Currently, MACSEC_SA_ATTR_PN is handled inconsistently, sometimes as a u32, sometimes forced into a u64 without checking the actual length of the attribute. Instead, we can use nla_get_u64 everywhere, which will read up to 64 bits into a u64, capped by the actual length of the attribute coming from userspace. This fixes several issues: - the check in validate_add_rxsa doesn't work with 32-bit attributes - the checks in validate_add_txsa and validate_upd_sa incorrectly reject X << 32 (with X != 0) Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25macsec: limit replay window size with XPNSabrina Dubroca1-4/+12
IEEE 802.1AEbw-2013 (section 10.7.8) specifies that the maximum value of the replay window is 2^30-1, to help with recovery of the upper bits of the PN. To avoid leaving the existing macsec device in an inconsistent state if this test fails during changelink, reuse the cleanup mechanism introduced for HW offload. This wasn't needed until now because macsec_changelink_common could not fail during changelink, as modifying the cipher suite was not allowed. Finally, this must happen after handling IFLA_MACSEC_CIPHER_SUITE so that secy->xpn is set. Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25macsec: fix error message in macsec_add_rxsa and _txsaSabrina Dubroca1-2/+2
The expected length is MACSEC_SALT_LEN, not MACSEC_SA_ATTR_SALT. Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25macsec: fix NULL deref in macsec_add_rxsaSabrina Dubroca1-1/+2
Commit 48ef50fa866a added a test on tb_sa[MACSEC_SA_ATTR_PN], but nothing guarantees that it's not NULL at this point. The same code was added to macsec_add_txsa, but there it's not a problem because validate_add_txsa checks that the MACSEC_SA_ATTR_PN attribute is present. Note: it's not possible to reproduce with iproute, because iproute doesn't allow creating an SA without specifying the PN. Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Link: https://bugzilla.kernel.org/show_bug.cgi?id=208315 Reported-by: Frantisek Sumsal <fsumsal@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25net: ipa: Fix typo 'the the' in commentSlark Xiao1-1/+1
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25nfp: bpf: Fix typo 'the the' in commentSlark Xiao1-1/+1
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao@163.com> Acked-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22net: sungem_phy: Add of_node_put() for reference returned by of_get_parent()Liang He1-0/+1
In bcm5421_init(), we should call of_node_put() for the reference returned by of_get_parent() which has increased the refcount. Fixes: 3c326fe9cb7a ("[PATCH] ppc64: Add new PHY to sungem") Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220720131003.1287426-1-windhl@126.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-22net: pcs: xpcs: propagate xpcs_read error to xpcs_get_state_c37_sgmiiVladimir Oltean1-1/+1
While phylink_pcs_ops :: pcs_get_state does return void, xpcs_get_state() does check for a non-zero return code from xpcs_get_state_c37_sgmii() and prints that as a message to the kernel log. However, a non-zero return code from xpcs_read() is translated into "return false" (i.e. zero as int) and the I/O error is therefore not printed. Fix that. Fixes: b97b5331b8ab ("net: pcs: add C37 SGMII AN support for intel mGbE controller") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220720112057.3504398-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-20Merge tag 'linux-can-fixes-for-5.19-20220720' of ↵David S. Miller2-5/+14
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== this is a pull request of 2 patches for net/master. The first patch is by me and fixes the detection of the mcp251863 in the mcp251xfd driver. The last patch is by Liang He and adds a missing of_node_put() in the rcar_canfd driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20mlxsw: spectrum_router: Fix IPv4 nexthop gateway indicationIdo Schimmel1-1/+1
mlxsw needs to distinguish nexthops with a gateway from connected nexthops in order to write the former to the adjacency table of the device. The check used to rely on the fact that nexthops with a gateway have a 'link' scope whereas connected nexthops have a 'host' scope. This is no longer correct after commit 747c14307214 ("ip: fix dflt addr selection for connected nexthop"). Fix that by instead checking the address family of the gateway IP. This is a more direct way and also consistent with the IPv6 counterpart in mlxsw_sp_rt6_is_gateway(). Cc: stable@vger.kernel.org Fixes: 747c14307214 ("ip: fix dflt addr selection for connected nexthop") Fixes: 597cfe4fc339 ("nexthop: Add support for IPv4 nexthops") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20tcp: Fix data-races around sysctl knobs related to SYN option.Kuniyuki Iwashima1-3/+3
While reading these knobs, they can be changed concurrently. Thus, we need to add READ_ONCE() to their readers. - tcp_sack - tcp_window_scaling - tcp_timestamps Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20ipv4: Fix data-races around sysctl_fib_multipath_hash_fields.Kuniyuki Iwashima1-1/+1
While reading sysctl_fib_multipath_hash_fields, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: ce5c9c20d364 ("ipv4: Add a sysctl to control multipath hash fields") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20ipv4: Fix data-races around sysctl_fib_multipath_hash_policy.Kuniyuki Iwashima1-1/+1
While reading sysctl_fib_multipath_hash_policy, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: bf4e0a3db97e ("net: ipv4: add support for ECMP hash policy choice") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20can: rcar_canfd: Add missing of_node_put() in rcar_canfd_probe()Liang He1-0/+1
We should use of_node_put() for the reference returned by of_get_child_by_name() which has increased the refcount. Fixes: 45721c406dcf ("can: rcar_canfd: Add support for r8a779a0 SoC") Link: https://lore.kernel.org/all/20220712095623.364287-1-windhl@126.com Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20can: mcp251xfd: fix detection of mcp251863Marc Kleine-Budde1-5/+13
In commit c6f2a617a0a8 ("can: mcp251xfd: add support for mcp251863") support for the mcp251863 was added. However it was not taken into account that the auto detection of the chip model cannot distinguish between mcp2518fd and mcp251863 and would lead to a warning message if the firmware specifies a mcp251863. Fix auto detection: If a mcp2518fd compatible chip is found, keep the mcp251863 if specified by firmware, use mcp2518fd instead. Link: https://lore.kernel.org/all/20220706064835.1848864-1-mkl@pengutronix.de Fixes: c6f2a617a0a8 ("can: mcp251xfd: add support for mcp251863") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20Merge branch '40GbE' of ↵Jakub Kicinski5-26/+81
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-07-18 This series contains updates to iavf driver only. Przemyslaw fixes handling of multiple VLAN requests to account for individual errors instead of rejecting them all. He removes incorrect implementations of ETHTOOL_COALESCE_MAX_FRAMES and ETHTOOL_COALESCE_MAX_FRAMES_IRQ. He also corrects an issue with NULL pointer caused by improper handling of dummy receive descriptors. Finally, he corrects debug prints reporting an unknown state. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: Fix missing state logs iavf: Fix handling of dummy receive descriptors iavf: Disallow changing rx/tx-frames and rx/tx-frames-irq iavf: Fix VLAN_V2 addition/rejection ==================== Link: https://lore.kernel.org/r/20220718174807.4113582-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-20net: ethernet: mtk_ppe: fix possible NULL pointer dereference in ↵Lorenzo Bianconi1-0/+3
mtk_flow_get_wdma_info odev pointer can be NULL in mtk_flow_offload_replace routine according to the flower action rules. Fix possible NULL pointer dereference in mtk_flow_get_wdma_info. Fixes: a333215e10cb5 ("net: ethernet: mtk_eth_soc: implement flow offloading to WED devices") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/4e1685bc4976e21e364055f6bee86261f8f9ee93.1658137753.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-20r8152: fix a WOL issueHayes Wang1-2/+14
This fixes that the platform is waked by an unexpected packet. The size and range of FIFO is different when the device enters S3 state, so it is necessary to correct some settings when suspending. Regardless of jumbo frame, set RMS to 1522 and MTPS to MTPS_DEFAULT. Besides, enable MCU_BORW_EN to update the method of calculating the pointer of data. Then, the hardware could get the correct data. Fixes: 195aae321c82 ("r8152: support new chips") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Link: https://lore.kernel.org/r/20220718082120.10957-391-nic_swsd@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-19amt: do not use amt->nr_tunnels outside of lockTaehee Yoo1-3/+6
amt->nr_tunnels is protected by amt->lock. But, amt_request_handler() has been using this variable without the amt->lock. So, it expands context of amt->lock in the amt_request_handler() to protect amt->nr_tunnels variable. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-19amt: drop unexpected multicast dataTaehee Yoo1-0/+3
AMT gateway interface should not receive unexpected multicast data. Multicast data message type should be received after sending an update message, which means all establishment between gateway and relay is finished. So, amt_multicast_data_handler() checks amt->status. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-19amt: drop unexpected query messageTaehee Yoo1-1/+13
AMT gateway interface should not receive unexpected query messages. In order to drop unexpected query messages, it checks nonce. And it also checks ready4 and ready6 variables to drop duplicated messages. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-19amt: drop unexpected advertisement messageTaehee Yoo1-0/+5
AMT gateway interface should not receive unexpected advertisement messages. In order to drop these packets, it should check nonce and amt->status. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-19amt: add missing regeneration nonce logic in request logicTaehee Yoo1-0/+4
When AMT gateway starts sending a new request message, it should regenerate the nonce variable. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-19amt: use READ_ONCE() in amt moduleTaehee Yoo1-7/+8
There are some data races in the amt module. amt->ready4, amt->ready6, and amt->status can be accessed concurrently without locks. So, it uses READ_ONCE() and WRITE_ONCE(). Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-19amt: remove unnecessary locksTaehee Yoo1-27/+5
By the previous patch, amt gateway handlers are changed to worked by a single thread. So, most locks for gateway are not needed. So, it removes. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-19amt: use workqueue for gateway side message handlingTaehee Yoo1-15/+144
There are some synchronization issues(amt->status, amt->req_cnt, etc) if the interface is in gateway mode because gateway message handlers are processed concurrently. This applies a work queue for processing these messages instead of expanding the locking context. So, the purposes of this patch are to fix exist race conditions and to make gateway to be able to validate a gateway status more correctly. When the AMT gateway interface is created, it tries to establish to relay. The establishment step looks stateless, but it should be managed well. In order to handle messages in the gateway, it saves the current status(i.e. AMT_STATUS_XXX). This patch makes gateway code to be worked with a single thread. Now, all messages except the multicast are triggered(received or delay expired), and these messages will be stored in the event queue(amt->events). Then, the single worker processes stored messages asynchronously one by one. The multicast data message type will be still processed immediately. Now, amt->lock is only needed to access the event queue(amt->events) if an interface is the gateway mode. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-19net: dsa: vitesse-vsc73xx: silent spi_device_id warningsOleksij Rempel1-0/+10
Add spi_device_id entries to silent SPI warnings. Fixes: 5fa6863ba692 ("spi: Check we have a spi_device_id for each DT compatible") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220717135831.2492844-2-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-19net: dsa: sja1105: silent spi_device_id warningsOleksij Rempel1-0/+16
Add spi_device_id entries to silent following warnings: SPI driver sja1105 has no spi_device_id for nxp,sja1105e SPI driver sja1105 has no spi_device_id for nxp,sja1105t SPI driver sja1105 has no spi_device_id for nxp,sja1105p SPI driver sja1105 has no spi_device_id for nxp,sja1105q SPI driver sja1105 has no spi_device_id for nxp,sja1105r SPI driver sja1105 has no spi_device_id for nxp,sja1105s SPI driver sja1105 has no spi_device_id for nxp,sja1110a SPI driver sja1105 has no spi_device_id for nxp,sja1110b SPI driver sja1105 has no spi_device_id for nxp,sja1110c SPI driver sja1105 has no spi_device_id for nxp,sja1110d Fixes: 5fa6863ba692 ("spi: Check we have a spi_device_id for each DT compatible") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220717135831.2492844-1-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-19be2net: Fix buffer overflow in be_get_module_eepromHristo Venev3-18/+25
be_cmd_read_port_transceiver_data assumes that it is given a buffer that is at least PAGE_DATA_LEN long, or twice that if the module supports SFF 8472. However, this is not always the case. Fix this by passing the desired offset and length to be_cmd_read_port_transceiver_data so that we only copy the bytes once. Fixes: e36edd9d26cf ("be2net: add ethtool "-m" option support") Signed-off-by: Hristo Venev <hristo@venev.name> Link: https://lore.kernel.org/r/20220716085134.6095-1-hristo@venev.name Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-19net: stmmac: remove redunctant disable xPCS EEE callWong Vee Khee1-8/+0
Disable is done in stmmac_init_eee() on the event of MAC link down. Since setting enable/disable EEE via ethtool will eventually trigger a MAC down, removing this redunctant call in stmmac_ethtool.c to avoid calling xpcs_config_eee() twice. Fixes: d4aeaed80b0e ("net: stmmac: trigger PCS EEE to turn off on link down") Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Link: https://lore.kernel.org/r/20220715122402.1017470-1-vee.khee.wong@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-19ixgbe: Add locking to prevent panic when setting sriov_numvfs to zeroPiotr Skajewski3-0/+10
It is possible to disable VFs while the PF driver is processing requests from the VF driver. This can result in a panic. BUG: unable to handle kernel paging request at 000000000000106c PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 8 PID: 0 Comm: swapper/8 Kdump: loaded Tainted: G I --------- - Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020 RIP: 0010:ixgbe_msg_task+0x4c8/0x1690 [ixgbe] Code: 00 00 48 8d 04 40 48 c1 e0 05 89 7c 24 24 89 fd 48 89 44 24 10 83 ff 01 0f 84 b8 04 00 00 4c 8b 64 24 10 4d 03 a5 48 22 00 00 <41> 80 7c 24 4c 00 0f 84 8a 03 00 00 0f b7 c7 83 f8 08 0f 84 8f 0a RSP: 0018:ffffb337869f8df8 EFLAGS: 00010002 RAX: 0000000000001020 RBX: 0000000000000000 RCX: 000000000000002b RDX: 0000000000000002 RSI: 0000000000000008 RDI: 0000000000000006 RBP: 0000000000000006 R08: 0000000000000002 R09: 0000000000029780 R10: 00006957d8f42832 R11: 0000000000000000 R12: 0000000000001020 R13: ffff8a00e8978ac0 R14: 000000000000002b R15: ffff8a00e8979c80 FS: 0000000000000000(0000) GS:ffff8a07dfd00000(0000) knlGS:00000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000106c CR3: 0000000063e10004 CR4: 00000000007726e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? ttwu_do_wakeup+0x19/0x140 ? try_to_wake_up+0x1cd/0x550 ? ixgbevf_update_xcast_mode+0x71/0xc0 [ixgbevf] ixgbe_msix_other+0x17e/0x310 [ixgbe] __handle_irq_event_percpu+0x40/0x180 handle_irq_event_percpu+0x30/0x80 handle_irq_event+0x36/0x53 handle_edge_irq+0x82/0x190 handle_irq+0x1c/0x30 do_IRQ+0x49/0xd0 common_interrupt+0xf/0xf This can be eventually be reproduced with the following script: while : do echo 63 > /sys/class/net/<devname>/device/sriov_numvfs sleep 1 echo 0 > /sys/class/net/<devname>/device/sriov_numvfs sleep 1 done Add lock when disabling SR-IOV to prevent process VF mailbox communication. Fixes: d773d1310625 ("ixgbe: Fix memory leak when SR-IOV VFs are direct assigned") Signed-off-by: Piotr Skajewski <piotrx.skajewski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220715214456.2968711-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-19i40e: Fix erroneous adapter reinitialization during recovery processDawid Lukwinski1-8/+5
Fix an issue when driver incorrectly detects state of recovery process and erroneously reinitializes interrupts, which results in a kernel error and call trace message. The issue was caused by a combination of two factors: 1. Assuming the EMP reset issued after completing firmware recovery means the whole recovery process is complete. 2. Erroneous reinitialization of interrupt vector after detecting the above mentioned EMP reset. Fixes (1) by changing how recovery state change is detected and (2) by adjusting the conditional expression to ensure using proper interrupt reinitialization method, depending on the situation. Fixes: 4ff0ee1af016 ("i40e: Introduce recovery mode support") Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220715214542.2968762-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-19net: ethernet: mtk_eth_soc: fix off by one check of ARRAY_SIZETom Rix1-1/+1
In mtk_wed_tx_ring_setup(.., int idx, ..), idx is used as an index here struct mtk_wed_ring *ring = &dev->tx_ring[idx]; The bounds of idx are checked here BUG_ON(idx > ARRAY_SIZE(dev->tx_ring)); If idx is the size of the array, it will pass this check and overflow. So change the check to >= . Fixes: 804775dfc288 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)") Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20220716214654.1540240-1-trix@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-19net: lan966x: Fix usage of lan966x->mac_lock when used by FDBHoratiu Vultur1-11/+23
When the SW bridge was trying to add/remove entries to/from HW, the access to HW was not protected by any lock. In this way, it was possible to have race conditions. Fix this by using the lan966x->mac_lock to protect parallel access to HW for this cases. Fixes: 25ee9561ec622 ("net: lan966x: More MAC table functionality") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-19net: lan966x: Fix usage of lan966x->mac_lock inside lan966x_mac_irq_handlerHoratiu Vultur1-7/+12
The problem with this spin lock is that it was just protecting the list of the MAC entries in SW and not also the access to the MAC entries in HW. Because the access to HW is indirect, then it could happen to have race conditions. For example when SW introduced an entry in MAC table and the irq mac is trying to read something from the MAC. Update such that also the access to MAC entries in HW is protected by this lock. Fixes: 5ccd66e01cbef ("net: lan966x: add support for interrupts from analyzer") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-19net: lan966x: Fix usage of lan966x->mac_lock when entry is removedHoratiu Vultur1-4/+20
To remove an entry to the MAC table, it is required first to setup the entry and then issue a command for the MAC to forget the entry. So if it happens for two threads to remove simultaneously an entry in MAC table then it would be a race condition. Fix this by using lan966x->mac_lock to protect the HW access. Fixes: e18aba8941b40 ("net: lan966x: add mactable support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-31 16:13:41 +0300