Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, netfilter, WiFi.
Feels like an up-tick in regression fixes, mostly for older releases.
The hfsc fix, tcp_disconnect() and Intel WWAN fixes stand out as
fairly clear-cut user reported regressions. The mlx5 DMA bug was
causing strife for 390x folks. The fixes themselves are not
particularly scary, tho. No open investigations / outstanding reports
at the time of writing.
Current release - regressions:
- eth: mlx5: perform DMA operations in the right locations, make
devices usable on s390x, again
- sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner
curve, previous fix of rejecting invalid config broke some scripts
- rfkill: reduce data->mtx scope in rfkill_fop_open, avoid deadlock
- revert "ethtool: Fix mod state of verbose no_mask bitset", needs
more work
Current release - new code bugs:
- tcp: fix listen() warning with v4-mapped-v6 address
Previous releases - regressions:
- tcp: allow tcp_disconnect() again when threads are waiting, it was
denied to plug a constant source of bugs but turns out .NET depends
on it
- eth: mlx5: fix double-free if buffer refill fails under OOM
- revert "net: wwan: iosm: enable runtime pm support for 7560", it's
causing regressions and the WWAN team at Intel disappeared
- tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a
single skb, fix single-stream perf regression on some devices
Previous releases - always broken:
- Bluetooth:
- fix issues in legacy BR/EDR PIN code pairing
- correctly bounds check and pad HCI_MON_NEW_INDEX name
- netfilter:
- more fixes / follow ups for the large "commit protocol" rework,
which went in as a fix to 6.5
- fix null-derefs on netlink attrs which user may not pass in
- tcp: fix excessive TLP and RACK timeouts from HZ rounding (bless
Debian for keeping HZ=250 alive)
- net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation, prevent
letting frankenstein UDP super-frames from getting into the stack
- net: fix interface altnames when ifc moves to a new namespace
- eth: qed: fix the size of the RX buffers
- mptcp: avoid sending RST when closing the initial subflow"
* tag 'net-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
Revert "ethtool: Fix mod state of verbose no_mask bitset"
selftests: mptcp: join: no RST when rm subflow/addr
mptcp: avoid sending RST when closing the initial subflow
mptcp: more conservative check for zero probes
tcp: check mptcp-level constraints for backlog coalescing
selftests: mptcp: join: correctly check for no RST
net: ti: icssg-prueth: Fix r30 CMDs bitmasks
selftests: net: add very basic test for netdev names and namespaces
net: move altnames together with the netdevice
net: avoid UAF on deleted altname
net: check for altname conflicts when changing netdev's netns
net: fix ifname in netlink ntf during netns move
net: ethernet: ti: Fix mixed module-builtin object
net: phy: bcm7xxx: Add missing 16nm EPHY statistics
ipv4: fib: annotate races around nh->nh_saddr_genid and nh->nh_saddr
tcp_bpf: properly release resources on error paths
net/sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner curve
net: mdio-mux: fix C45 access returning -EIO after API change
tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a single skb
octeon_ep: update BQL sent bytes before ringing doorbell
...
|
|
The bitmasks for EMAC_PORT_DISABLE and EMAC_PORT_FORWARD r30 commands are
wrong in the driver.
Update the bitmasks of these commands to the correct ones as used by the
ICSSG firmware. These bitmasks are backwards compatible and work with
any ICSSG firmware version.
Fixes: e9b4ece7d74b ("net: ti: icssg-prueth: Add Firmware config and classification APIs.")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20231018150715.3085380-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With CONFIG_TI_K3_AM65_CPSW_NUSS=y and CONFIG_TI_ICSSG_PRUETH=m,
k3-cppi-desc-pool.o is linked to a module and also to vmlinux even though
the expected CFLAGS are different between builtins and modules.
The build system is complaining about the following:
k3-cppi-desc-pool.o is added to multiple modules: icssg-prueth
ti-am65-cpsw-nuss
Introduce the new module, k3-cppi-desc-pool, to provide the common
functions to ti-am65-cpsw-nuss and icssg-prueth.
Fixes: 128d5874c082 ("net: ti: icssg-prueth: Add ICSSG ethernet driver")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20231018064936.3146846-1-danishanwar@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The .probe() function would allocate the necessary space and ensure that
the library call sizes the number of statistics but the callbacks
necessary to fetch the name and values were not wired up.
Reported-by: Justin Chen <justin.chen@broadcom.com>
Fixes: f68d08c437f9 ("net: phy: bcm7xxx: Add EPHY entry for 72165")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231017205119.416392-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mii_bus API conversion to read_c45() and write_c45() did not cover
the mdio-mux driver before read() and write() were made C22-only.
This broke arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dtso.
The -EOPNOTSUPP from mdiobus_c45_read() is transformed by
get_phy_c45_devs_in_pkg() into -EIO, is further propagated to
of_mdiobus_register() and this makes the mdio-mux driver fail to probe
the entire child buses, not just the PHYs that cause access errors.
Fix the regression by introducing special c45 read and write accessors
to mdio-mux which forward the operation to the parent MDIO bus.
Fixes: db1a63aed89c ("net: phy: Remove fallback to old C45 method")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20231017143144.3212657-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sometimes Tx is completed immediately after doorbell is updated, which
causes Tx completion routing to update completion bytes before the
same packet bytes are updated in sent bytes in transmit function, hence
hitting BUG_ON() in dql_completed(). To avoid this, update BQL
sent bytes before ringing doorbell.
Fixes: 37d79d059606 ("octeon_ep: add Tx/Rx processing and interrupt support")
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Link: https://lore.kernel.org/r/20231017105030.2310966-1-srasheed@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Runtime power management support breaks Intel LTE modem where dmesg dump
showes timeout errors:
```
[ 72.027442] iosm 0000:01:00.0: msg timeout
[ 72.531638] iosm 0000:01:00.0: msg timeout
[ 73.035414] iosm 0000:01:00.0: msg timeout
[ 73.540359] iosm 0000:01:00.0: msg timeout
```
Furthermore, when shutting down with `poweroff` and modem attached, the
system rebooted instead of powering down as expected. The modem works
again only after power cycling.
Revert runtime power management support for IOSM driver as introduced by
commit e4f5073d53be6c ("net: wwan: iosm: enable runtime pm support for
7560").
Fixes: e4f5073d53be ("net: wwan: iosm: enable runtime pm support for 7560")
Reported-by: Martin <mwolf@adiumentum.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217996
Link: https://lore.kernel.org/r/267abf02-4b60-4a2e-92cd-709e3da6f7d3@gmail.com/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Return a negative error code instead of success.
Fixes: 2f7ca802bdae ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/147927f0-9ada-45cc-81ff-75a19dd30b76@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After commit 956db0a13b47 ("net: warn about attempts to register
negative ifindex") syzbot is able to trigger the following splat.
Negative ifindex are not supported.
WARNING: CPU: 1 PID: 6003 at net/core/dev.c:9596 dev_index_reserve+0x104/0x210
Modules linked in:
CPU: 1 PID: 6003 Comm: syz-executor926 Not tainted 6.6.0-rc4-syzkaller-g19af4a4ed414 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/06/2023
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : dev_index_reserve+0x104/0x210
lr : dev_index_reserve+0x100/0x210
sp : ffff800096a878e0
x29: ffff800096a87930 x28: ffff0000d04380d0 x27: ffff0000d04380f8
x26: ffff0000d04380f0 x25: 1ffff00012d50f20 x24: 1ffff00012d50f1c
x23: dfff800000000000 x22: ffff8000929c21c0 x21: 00000000ffffffea
x20: ffff0000d04380e0 x19: ffff800096a87900 x18: ffff800096a874c0
x17: ffff800084df5008 x16: ffff80008051f9c4 x15: 0000000000000001
x14: 1fffe0001a087198 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff0000d41c9bc0 x7 : 0000000000000000 x6 : 0000000000000000
x5 : ffff800091763d88 x4 : 0000000000000000 x3 : ffff800084e04748
x2 : 0000000000000001 x1 : 00000000fead71c7 x0 : 0000000000000000
Call trace:
dev_index_reserve+0x104/0x210
register_netdevice+0x598/0x1074 net/core/dev.c:10084
tun_set_iff+0x630/0xb0c drivers/net/tun.c:2850
__tun_chr_ioctl+0x788/0x2af8 drivers/net/tun.c:3118
tun_chr_ioctl+0x38/0x4c drivers/net/tun.c:3403
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:871 [inline]
__se_sys_ioctl fs/ioctl.c:857 [inline]
__arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:857
__invoke_syscall arch/arm64/kernel/syscall.c:37 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155
el0_svc+0x58/0x16c arch/arm64/kernel/entry-common.c:678
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:595
irq event stamp: 11348
hardirqs last enabled at (11347): [<ffff80008a716574>] __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:151 [inline]
hardirqs last enabled at (11347): [<ffff80008a716574>] _raw_spin_unlock_irqrestore+0x38/0x98 kernel/locking/spinlock.c:194
hardirqs last disabled at (11348): [<ffff80008a627820>] el1_dbg+0x24/0x80 arch/arm64/kernel/entry-common.c:436
softirqs last enabled at (11138): [<ffff8000887ca53c>] spin_unlock_bh include/linux/spinlock.h:396 [inline]
softirqs last enabled at (11138): [<ffff8000887ca53c>] release_sock+0x15c/0x1b0 net/core/sock.c:3531
softirqs last disabled at (11136): [<ffff8000887ca41c>] spin_lock_bh include/linux/spinlock.h:356 [inline]
softirqs last disabled at (11136): [<ffff8000887ca41c>] release_sock+0x3c/0x1b0 net/core/sock.c:3518
Fixes: fb7589a16216 ("tun: Add ability to create tun device with given index")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20231016180851.3560092-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The prefill function should have only removed the page count bias it
added. Fully freeing the page will cause gve_free_queue_page_list to
free a page the driver no longer owns.
Fixes: 82fd151d38d9 ("gve: Reduce alloc and copy costs in the GQ rx path")
Signed-off-by: Shailend Chand <shailend@google.com>
Link: https://lore.kernel.org/r/20231014014121.2843922-1-shailend@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 295525e29a5b ("virtio_net: merge dma operations when filling
mergeable buffers") unmaps the buffer with DMA_ATTR_SKIP_CPU_SYNC when
the dma->ref is zero. We do that with DMA_ATTR_SKIP_CPU_SYNC, because we
do not want to do the sync for the entire page_frag. But that misses the
sync for the current area.
This patch does cpu sync regardless of whether the ref is zero or not.
Fixes: 295525e29a5b ("virtio_net: merge dma operations when filling mergeable buffers")
Reported-by: Michael Roth <michael.roth@amd.com>
Closes: http://lore.kernel.org/all/20230926130451.axgodaa6tvwqs3ut@amd.com
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Driver allocates the LL2 rx buffers from kmalloc()
area to construct the skb using slab_build_skb()
The required size allocation seems to have overlooked
for accounting both skb_shared_info size and device
placement padding bytes which results into the below
panic when doing skb_put() for a standard MTU sized frame.
skbuff: skb_over_panic: text:ffffffffc0b0225f len:1514 put:1514
head:ff3dabceaf39c000 data:ff3dabceaf39c042 tail:0x62c end:0x566
dev:<NULL>
…
skb_panic+0x48/0x4a
skb_put.cold+0x10/0x10
qed_ll2b_complete_rx_packet+0x14f/0x260 [qed]
qed_ll2_rxq_handle_completion.constprop.0+0x169/0x200 [qed]
qed_ll2_rxq_completion+0xba/0x320 [qed]
qed_int_sp_dpc+0x1a7/0x1e0 [qed]
This patch fixes this by accouting skb_shared_info and device
placement padding size bytes when allocating the buffers.
Cc: David S. Miller <davem@davemloft.net>
Fixes: 0a7fb11c23c0 ("qed: Add Light L2 support")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2023-10-12
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2023-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Fix VF representors reporting zero counters to "ip -s" command
net/mlx5e: Don't offload internal port if filter device is out device
net/mlx5e: Take RTNL lock before triggering netdev notifiers
net/mlx5e: XDP, Fix XDP_REDIRECT mpwqe page fragment leaks on shutdown
net/mlx5e: RX, Fix page_pool allocation failure recovery for legacy rq
net/mlx5e: RX, Fix page_pool allocation failure recovery for striding rq
net/mlx5: Handle fw tracer change ownership event based on MTRC
net/mlx5: Bridge, fix peer entry ageing in LAG mode
net/mlx5: E-switch, register event handler before arming the event
net/mlx5: Perform DMA operations in the right locations
====================
Link: https://lore.kernel.org/r/20231012195127.129585-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
One thing is broken in the safe mode, that is
ice_deinit_features() is being executed even
that ice_init_features() was not causing stack
trace during pci_unregister_driver().
Add check on the top of the function.
Fixes: 5b246e533d01 ("ice: split probe into smaller functions")
Signed-off-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Link: https://lore.kernel.org/r/20231011233334.336092-4-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the system boots into the crash dump kernel after a panic, the ice
networking device may still have pending transactions that can cause errors
or machine checks when the device is re-enabled. This can prevent the crash
dump kernel from loading the driver or collecting the crash data.
To avoid this issue, perform a function level reset (FLR) on the ice device
via PCIe config space before enabling it on the crash kernel. This will
clear any outstanding transactions and stop all queues and interrupts.
Restore the config space after the FLR, otherwise it was found in testing
that the driver wouldn't load successfully.
The following sequence causes the original issue:
- Load the ice driver with modprobe ice
- Enable SR-IOV with 2 VFs: echo 2 > /sys/class/net/eth0/device/sriov_num_vfs
- Trigger a crash with echo c > /proc/sysrq-trigger
- Load the ice driver again (or let it load automatically) with modprobe ice
- The system crashes again during pcim_enable_device()
Fixes: 837f08fdecbe ("ice: Add basic driver framework for Intel(R) E800 Series")
Reported-by: Vishal Agrawal <vagrawal@redhat.com>
Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Link: https://lore.kernel.org/r/20231011233334.336092-3-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The hardware provides the indexes of the first and the last available
queue and VF. From the indexes, the driver calculates the numbers of
queues and VFs. In theory, a faulty device might say the last index is
smaller than the first index. In that case, the driver's calculation
would underflow, it would attempt to write to non-existent registers
outside of the ioremapped range and crash.
I ran into this not by having a faulty device, but by an operator error.
I accidentally ran a QE test meant for i40e devices on an ice device.
The test used 'echo i40e > /sys/...ice PCI device.../driver_override',
bound the driver to the device and crashed in one of the wr32 calls in
i40e_clear_hw.
Add checks to prevent underflows in the calculations of num_queues and
num_vfs. With this fix, the wrong device probing reports errors and
returns a failure without crashing.
Fixes: 838d41d92a90 ("i40e: clear all queues and interrupts")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Link: https://lore.kernel.org/r/20231011233334.336092-2-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ICSSG HW stats on TX side considers 8 preamble bytes as data bytes. Due
to this the tx_bytes of ICSSG interface doesn't match the rx_bytes of the
link partner. There is no public errata available yet.
As a workaround to fix this, decrease tx_bytes by 8 bytes for every tx
frame.
Fixes: c1e10d5dc7a1 ("net: ti: icssg-prueth: Add ICSSG Stats")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20231012064626.977466-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As reported by Tom, .NET and applications build on top of it rely
on connect(AF_UNSPEC) to async cancel pending I/O operations on TCP
socket.
The blamed commit below caused a regression, as such cancellation
can now fail.
As suggested by Eric, this change addresses the problem explicitly
causing blocking I/O operation to terminate immediately (with an error)
when a concurrent disconnect() is executed.
Instead of tracking the number of threads blocked on a given socket,
track the number of disconnect() issued on such socket. If such counter
changes after a blocking operation releasing and re-acquiring the socket
lock, error out the current operation.
Fixes: 4faeee0cf8a5 ("tcp: deny tcp_disconnect() when threads are waiting")
Reported-by: Tom Deseyn <tdeseyn@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1886305
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/f3b95e47e3dbed840960548aebaa8d954372db41.1697008693.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the introduction of the ice driver the code has been
double-shifting the RSS enabling field, because the define already has
shifts in it and can't have the regular pattern of "a << shiftval &
mask" applied.
Most places in the code got it right, but one line was still wrong. Fix
this one location for easy backports to stable. An in-progress patch
fixes the defines to "standard" and will be applied as part of the
regular -next process sometime after this one.
Fixes: d76a60ba7afb ("ice: Add support for VLANs and offloads")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
CC: stable@vger.kernel.org
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231010203101.406248-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In bcm_sf2_mdio_register(), the class_find_device() will call get_device()
to increment reference count for priv->master_mii_bus->dev if
of_mdio_find_bus() succeeds. If mdiobus_alloc() or mdiobus_register()
fails, it will call get_device() twice without decrement reference count
for the device. And it is the same if bcm_sf2_mdio_register() succeeds but
fails in bcm_sf2_sw_probe(), or if bcm_sf2_sw_probe() succeeds. If the
reference count has not decremented to zero, the dev related resource will
not be freed.
So remove the get_device() in bcm_sf2_mdio_register(), and call
put_device() if mdiobus_alloc() or mdiobus_register() fails and in
bcm_sf2_mdio_unregister() to solve the issue.
And as Simon suggested, unwind from errors for bcm_sf2_mdio_register() and
just return 0 if it succeeds to make it cleaner.
Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231011032419.2423290-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since 429e3d123d9a ("bonding: Fix extraction of ports from the packet
headers"), header offsets used to compute a hash in bond_xmit_hash() are
relative to skb->data and not skb->head. If the tail of the header buffer
of an skb really needs to be advanced and the operation is successful, the
pointer to the data must be returned (and not a pointer to the head of the
buffer).
Fixes: 429e3d123d9a ("bonding: Fix extraction of ports from the packet headers")
Signed-off-by: Jiri Wiesner <jwiesner@suse.de>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Although vf_vport entry of struct mlx5e_stats is never updated, its
values are mistakenly copied to the caller structure in the VF
representor .ndo_get_stat_64 callback mlx5e_rep_get_stats(). Remove
redundant entry and use the updated one, rep_stats, instead.
Fixes: 64b68e369649 ("net/mlx5: Refactor and expand rep vport stat group")
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In the cited commit, if the routing device is ovs internal port, the
out device is set to uplink, and packets go out after encapsulation.
If filter device is uplink, it can trigger the following syndrome:
mlx5_core 0000:08:00.0: mlx5_cmd_out_err:803:(pid 3966): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xcdb051), err(-22)
Fix this issue by not offloading internal port if filter device is out
device. In this case, packets are not forwarded to the root table to
be processed, the termination table is used instead to forward them
from uplink to uplink.
Fixes: 100ad4e2d758 ("net/mlx5e: Offload internal port as encap route device")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Hold RTNL lock when calling xdp_set_features() with a registered netdev,
as the call triggers the netdev notifiers. This could happen when
switching from nic profile to uplink representor for example.
Similar logic which fixed a similar scenario was previously introduced in
the following commit:
commit 72cc65497065 net/mlx5e: Take RTNL lock when needed before calling
xdp_set_features().
This fixes the following assertion and warning call trace:
RTNL: assertion failed at net/core/dev.c (1961)
WARNING: CPU: 13 PID: 2529 at net/core/dev.c:1961
call_netdevice_notifiers_info+0x7c/0x80
Modules linked in: rpcrdma rdma_ucm ib_iser libiscsi
scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib
ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink
nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5
auth_rpcgss oid_registry overlay mlx5_core zram zsmalloc fuse
CPU: 13 PID: 2529 Comm: devlink Not tainted
6.5.0_for_upstream_min_debug_2023_09_07_20_04 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:call_netdevice_notifiers_info+0x7c/0x80
Code: 8f ff 80 3d 77 0d 16 01 00 75 c5 ba a9 07 00 00 48
c7 c6 c4 bb 0d 82 48 c7 c7 18 c8 06 82 c6 05 5b 0d 16 01 01 e8 44 f6 8c
ff <0f> 0b eb a2 0f 1f 44 00 00 55 48 89 e5 41 54 48 83 e4 f0 48 83 ec
RSP: 0018:ffff88819930f7f0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffffff8309f740 RCX: 0000000000000027
RDX: ffff88885fb5b5c8 RSI: 0000000000000001 RDI: ffff88885fb5b5c0
RBP: 0000000000000028 R08: ffff88887ffabaa8 R09: 0000000000000003
R10: ffff88887fecbac0 R11: ffff88887ff7bac0 R12: ffff88819930f810
R13: ffff88810b7fea40 R14: ffff8881154e8fd8 R15: ffff888107e881a0
FS: 00007f3ad248f800(0000) GS:ffff88885fb40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000563b85f164e0 CR3: 0000000113b5c006 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __warn+0x79/0x120
? call_netdevice_notifiers_info+0x7c/0x80
? report_bug+0x17c/0x190
? handle_bug+0x3c/0x60
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
? call_netdevice_notifiers_info+0x7c/0x80
call_netdevice_notifiers+0x2e/0x50
mlx5e_set_xdp_feature+0x21/0x50 [mlx5_core]
mlx5e_build_rep_params+0x97/0x130 [mlx5_core]
mlx5e_init_ul_rep+0x9f/0x100 [mlx5_core]
mlx5e_netdev_init_profile+0x76/0x110 [mlx5_core]
mlx5e_netdev_attach_profile+0x1f/0x90 [mlx5_core]
mlx5e_netdev_change_profile+0x92/0x160 [mlx5_core]
mlx5e_vport_rep_load+0x329/0x4a0 [mlx5_core]
mlx5_esw_offloads_rep_load+0x9e/0xf0 [mlx5_core]
esw_offloads_enable+0x4bc/0xe90 [mlx5_core]
mlx5_eswitch_enable_locked+0x3c8/0x570 [mlx5_core]
? kmalloc_trace+0x25/0x80
mlx5_devlink_eswitch_mode_set+0x224/0x680 [mlx5_core]
? devlink_get_from_attrs_lock+0x9e/0x110
devlink_nl_cmd_eswitch_set_doit+0x60/0xe0
genl_family_rcv_msg_doit+0xd0/0x120
genl_rcv_msg+0x180/0x2b0
? devlink_get_from_attrs_lock+0x110/0x110
? devlink_nl_cmd_eswitch_get_doit+0x290/0x290
? devlink_pernet_pre_exit+0xf0/0xf0
? genl_family_rcv_msg_dumpit+0xf0/0xf0
netlink_rcv_skb+0x54/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x1fc/0x2c0
netlink_sendmsg+0x232/0x4a0
sock_sendmsg+0x38/0x60
? _copy_from_user+0x2a/0x60
__sys_sendto+0x110/0x160
? handle_mm_fault+0x161/0x260
? do_user_addr_fault+0x276/0x620
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f3ad231340a
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3
0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f
05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:00007ffd70aad4b8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000c36b00 RCX:00007f3ad231340a
RDX: 0000000000000038 RSI: 0000000000c36b00 RDI: 0000000000000003
RBP: 0000000000c36910 R08: 00007f3ad2625200 R09: 000000000000000c
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001
</TASK>
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
Fixes: 4d5ab0ad964d ("net/mlx5e: take into account device reconfiguration for xdp_features flag")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When mlx5e_xdp_xmit is called without the XDP_XMIT_FLUSH set it is
possible that it leaves a mpwqe session open. That is ok during runtime:
the session will be closed on the next call to mlx5e_xdp_xmit. But
having a mpwqe session still open at XDP sq close time is problematic:
the pc counter is not updated before flushing the contents of the
xdpi_fifo. This results in leaking page fragments.
The fix is to always close the mpwqe session at the end of
mlx5e_xdp_xmit, regardless of the XDP_XMIT_FLUSH flag being set or not.
Fixes: 5e0d2eef771e ("net/mlx5e: XDP, Support Enhanced Multi-Packet TX WQE")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When a page allocation fails during refill in mlx5e_refill_rx_wqes, the
page will be released again on the next refill call. This triggers the
page_pool negative page fragment count warning below:
[ 338.326070] WARNING: CPU: 4 PID: 0 at include/net/page_pool/helpers.h:130 mlx5e_page_release_fragmented.isra.0+0x42/0x50 [mlx5_core]
...
[ 338.328993] RIP: 0010:mlx5e_page_release_fragmented.isra.0+0x42/0x50 [mlx5_core]
[ 338.329094] Call Trace:
[ 338.329097] <IRQ>
[ 338.329100] ? __warn+0x7d/0x120
[ 338.329105] ? mlx5e_page_release_fragmented.isra.0+0x42/0x50 [mlx5_core]
[ 338.329173] ? report_bug+0x155/0x180
[ 338.329179] ? handle_bug+0x3c/0x60
[ 338.329183] ? exc_invalid_op+0x13/0x60
[ 338.329187] ? asm_exc_invalid_op+0x16/0x20
[ 338.329192] ? mlx5e_page_release_fragmented.isra.0+0x42/0x50 [mlx5_core]
[ 338.329259] mlx5e_post_rx_wqes+0x210/0x5a0 [mlx5_core]
[ 338.329327] ? mlx5e_poll_rx_cq+0x88/0x6f0 [mlx5_core]
[ 338.329394] mlx5e_napi_poll+0x127/0x6b0 [mlx5_core]
[ 338.329461] __napi_poll+0x25/0x1a0
[ 338.329465] net_rx_action+0x28a/0x300
[ 338.329468] __do_softirq+0xcd/0x279
[ 338.329473] irq_exit_rcu+0x6a/0x90
[ 338.329477] common_interrupt+0x82/0xa0
[ 338.329482] </IRQ>
This patch fixes the legacy rq case by releasing all allocated fragments
and then setting the skip flag on all released fragments. It is
important to note that the number of released fragments will be higher
than the number of allocated fragments when an allocation error occurs.
Fixes: 3f93f82988bc ("net/mlx5e: RX, Defer page release in legacy rq for better recycling")
Tested-by: Chris Mason <clm@fb.com>
Reported-by: Chris Mason <clm@fb.com>
Closes: https://lore.kernel.org/netdev/117FF31A-7BE0-4050-B2BB-E41F224FF72F@meta.com
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When a page allocation fails during refill in mlx5e_post_rx_mpwqes, the
page will be released again on the next refill call. This triggers the
page_pool negative page fragment count warning below:
[ 2436.447717] WARNING: CPU: 1 PID: 2419 at include/net/page_pool/helpers.h:130 mlx5e_page_release_fragmented.isra.0+0x42/0x50 [mlx5_core]
...
[ 2436.447895] RIP: 0010:mlx5e_page_release_fragmented.isra.0+0x42/0x50 [mlx5_core]
[ 2436.447991] Call Trace:
[ 2436.447975] mlx5e_post_rx_mpwqes+0x1d5/0xcf0 [mlx5_core]
[ 2436.447994] <IRQ>
[ 2436.447996] ? __warn+0x7d/0x120
[ 2436.448009] ? mlx5e_handle_rx_cqe_mpwrq+0x109/0x1d0 [mlx5_core]
[ 2436.448002] ? mlx5e_page_release_fragmented.isra.0+0x42/0x50 [mlx5_core]
[ 2436.448044] ? mlx5e_poll_rx_cq+0x87/0x6e0 [mlx5_core]
[ 2436.448061] ? report_bug+0x155/0x180
[ 2436.448065] ? handle_bug+0x36/0x70
[ 2436.448067] ? exc_invalid_op+0x13/0x60
[ 2436.448070] ? asm_exc_invalid_op+0x16/0x20
[ 2436.448079] mlx5e_napi_poll+0x122/0x6b0 [mlx5_core]
[ 2436.448077] ? mlx5e_page_release_fragmented.isra.0+0x42/0x50 [mlx5_core]
[ 2436.448113] ? generic_exec_single+0x35/0x100
[ 2436.448117] __napi_poll+0x25/0x1a0
[ 2436.448120] net_rx_action+0x28a/0x300
[ 2436.448122] __do_softirq+0xcd/0x279
[ 2436.448126] irq_exit_rcu+0x6a/0x90
[ 2436.448128] sysvec_apic_timer_interrupt+0x6e/0x90
[ 2436.448130] </IRQ>
This patch fixes the striding rq case by setting the skip flag on all
the wqe pages that were expected to have new pages allocated.
Fixes: 4c2a13236807 ("net/mlx5e: RX, Defer page release in striding rq for better recycling")
Tested-by: Chris Mason <clm@fb.com>
Reported-by: Chris Mason <clm@fb.com>
Closes: https://lore.kernel.org/netdev/117FF31A-7BE0-4050-B2BB-E41F224FF72F@meta.com
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently, whenever fw issues a change ownership event, the PF that owns
the fw tracer drops its ownership directly and the other PFs try to pick
up the ownership via what MTRC register suggests.
In some cases, driver releases the ownership of the tracer and reacquires
it later on. Whenever the driver releases ownership of the tracer, fw
issues a change ownership event. This event can be delayed and come after
driver has reacquired ownership of the tracer. Thus the late event will
trigger the tracer owner PF to release the ownership again and lead to a
scenario where no PF is owning the tracer.
To prevent the scenario described above, when handling a change
ownership event, do not drop ownership of the tracer directly, instead
read the fw MTRC register to retrieve the up-to-date owner of the tracer
and set it accordingly in driver level.
Fixes: f53aaa31cce7 ("net/mlx5: FW tracer, implement tracer logic")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
With current implementation in single FDB LAG mode all packets are
processed by eswitch 0 rules. As such, 'peer' FDB entries receive the
packets for rules of other eswitches and are responsible for updating the
main entry by sending SWITCHDEV_FDB_ADD_TO_BRIDGE notification from their
background update wq task. However, this introduces a race condition when
non-zero eswitch instance decides to delete a FDB entry, sends
SWITCHDEV_FDB_DEL_TO_BRIDGE notification, but another eswitch's update task
refreshes the same entry concurrently while its async delete work is still
pending on the workque. In such case another SWITCHDEV_FDB_ADD_TO_BRIDGE
event may be generated and entry will remain stuck in FDB marked as
'offloaded' since no more SWITCHDEV_FDB_DEL_TO_BRIDGE notifications are
sent for deleting the peer entries.
Fix the issue by synchronously marking deleted entries with
MLX5_ESW_BRIDGE_FLAG_DELETED flag and skipping them in background update
job.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently, mlx5 is registering event handler for vport context change
event some time after arming the event. this can lead to missing an
event, which will result in wrong rules in the FDB.
Hence, register the event handler before arming the event.
This solution is valid since FW is sending vport context change event
only on vports which SW armed, and SW arming the vport when enabling
it, which is done after the FDB has been created.
Fixes: 6933a9379559 ("net/mlx5: E-Switch, Use async events chain")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The cited patch change mlx5 driver so that during probe DMA
operations were performed before pci_enable_device(), and during
teardown DMA operations were performed after pci_disable_device().
DMA operations require PCI to be enabled. Hence, The above leads to
the following oops in PPC systems[1].
On s390x systems, as reported by Niklas Schnelle, this is a problem
because mlx5_pci_init() is where the DMA and coherent mask is set but
mlx5_cmd_init() already does a dma_alloc_coherent(). Thus a DMA
allocation is done during probe before the correct mask is set. This
causes probe to fail initialization of the cmdif SW structs on s390x
after that is converted to the common dma-iommu code. This is because on
s390x DMA addresses below 4 GiB are reserved on current machines and
unlike the old s390x specific DMA API implementation common code
enforces DMA masks.
Fix it by performing the DMA operations during probe after
pci_enable_device() and after the dma mask is set,
and during teardown before pci_disable_device().
[1]
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: xt_MASQUERADE nf_conntrack_netlink
nfnetlink xfrm_user iptable_nat xt_addrtype xt_conntrack nf_nat
nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 netconsole rpcsec_gss_krb5
auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser ib_umad
rdma_cm ib_ipoib iw_cm libiscsi scsi_transport_iscsi ib_cm ib_uverbs
ib_core mlx5_core(-) ptp pps_core fuse vmx_crypto crc32c_vpmsum [last
unloaded: mlx5_ib]
CPU: 1 PID: 8937 Comm: modprobe Not tainted 6.5.0-rc3_for_upstream_min_debug_2023_07_31_16_02 #1
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries
NIP: c000000000423388 LR: c0000000001e733c CTR: c0000000001e4720
REGS: c0000000055636d0 TRAP: 0380 Not tainted (6.5.0-rc3_for_upstream_min_debug_2023_07_31_16_02)
MSR: 8000000000009033 CR: 24008884 XER: 20040000
CFAR: c0000000001e7338 IRQMASK: 0
NIP [c000000000423388] __free_pages+0x28/0x160
LR [c0000000001e733c] dma_direct_free+0xac/0x190
Call Trace:
[c000000005563970] [5deadbeef0000100] 0x5deadbeef0000100 (unreliable)
[c0000000055639b0] [c0000000003d46cc] kfree+0x7c/0x150
[c000000005563a40] [c0000000001e47c8] dma_free_attrs+0xa8/0x1a0
[c000000005563aa0] [c008000000d0064c] mlx5_cmd_cleanup+0xa4/0x100 [mlx5_core]
[c000000005563ad0] [c008000000cf629c] mlx5_mdev_uninit+0xf4/0x140 [mlx5_core]
[c000000005563b00] [c008000000cf6448] remove_one+0x160/0x1d0 [mlx5_core]
[c000000005563b40] [c000000000958540] pci_device_remove+0x60/0x110
[c000000005563b80] [c000000000a35e80] device_remove+0x70/0xd0
[c000000005563bb0] [c000000000a37a38] device_release_driver_internal+0x2a8/0x330
[c000000005563c00] [c000000000a37b8c] driver_detach+0x8c/0x160
[c000000005563c40] [c000000000a35350] bus_remove_driver+0x90/0x110
[c000000005563c80] [c000000000a38948] driver_unregister+0x48/0x90
[c000000005563cf0] [c000000000957e38] pci_unregister_driver+0x38/0x150
[c000000005563d40] [c008000000eb6140] mlx5_cleanup+0x38/0x90 [mlx5_core]
Fixes: 06cd555f73ca ("net/mlx5: split mlx5_cmd_init() to probe and reload routines")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The phy_power_off() should not be called if phy_power_on() failed.
So, add a condition .power_count before calls phy_power_off().
Fixes: 5cb630925b49 ("net: renesas: rswitch: Add phy_power_{on,off}() calling")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix functions calling order and a condition in renesas_eth_sw_remove().
Otherwise, kernel NULL pointer dereference happens from phy_stop() if
a net device opens.
Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since page pool param's "order" is set to 0, will result
in below warn message if interface is configured with higher
rx buffer size.
Steps to reproduce the issue.
1. devlink dev param set pci/0002:04:00.0 name receive_buffer_size \
value 8196 cmode runtime
2. ifconfig eth0 up
[ 19.901356] ------------[ cut here ]------------
[ 19.901361] WARNING: CPU: 11 PID: 12331 at net/core/page_pool.c:567 page_pool_alloc_frag+0x3c/0x230
[ 19.901449] pstate: 82401009 (Nzcv daif +PAN -UAO +TCO -DIT +SSBS BTYPE=--)
[ 19.901451] pc : page_pool_alloc_frag+0x3c/0x230
[ 19.901453] lr : __otx2_alloc_rbuf+0x60/0xbc [rvu_nicpf]
[ 19.901460] sp : ffff80000f66b970
[ 19.901461] x29: ffff80000f66b970 x28: 0000000000000000 x27: 0000000000000000
[ 19.901464] x26: ffff800000d15b68 x25: ffff000195b5c080 x24: ffff0002a5a32dc0
[ 19.901467] x23: ffff0001063c0878 x22: 0000000000000100 x21: 0000000000000000
[ 19.901469] x20: 0000000000000000 x19: ffff00016f781000 x18: 0000000000000000
[ 19.901472] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 19.901474] x14: 0000000000000000 x13: ffff0005ffdc9c80 x12: 0000000000000000
[ 19.901477] x11: ffff800009119a38 x10: 4c6ef2e3ba300519 x9 : ffff800000d13844
[ 19.901479] x8 : ffff0002a5a33cc8 x7 : 0000000000000030 x6 : 0000000000000030
[ 19.901482] x5 : 0000000000000005 x4 : 0000000000000000 x3 : 0000000000000a20
[ 19.901484] x2 : 0000000000001080 x1 : ffff80000f66b9d4 x0 : 0000000000001000
[ 19.901487] Call trace:
[ 19.901488] page_pool_alloc_frag+0x3c/0x230
[ 19.901490] __otx2_alloc_rbuf+0x60/0xbc [rvu_nicpf]
[ 19.901494] otx2_rq_aura_pool_init+0x1c4/0x240 [rvu_nicpf]
[ 19.901498] otx2_open+0x228/0xa70 [rvu_nicpf]
[ 19.901501] otx2vf_open+0x20/0xd0 [rvu_nicvf]
[ 19.901504] __dev_open+0x114/0x1d0
[ 19.901507] __dev_change_flags+0x194/0x210
[ 19.901510] dev_change_flags+0x2c/0x70
[ 19.901512] devinet_ioctl+0x3a4/0x6c4
[ 19.901515] inet_ioctl+0x228/0x240
[ 19.901518] sock_ioctl+0x2ac/0x480
[ 19.901522] __arm64_sys_ioctl+0x564/0xe50
[ 19.901525] invoke_syscall.constprop.0+0x58/0xf0
[ 19.901529] do_el0_svc+0x58/0x150
[ 19.901531] el0_svc+0x30/0x140
[ 19.901533] el0t_64_sync_handler+0xe8/0x114
[ 19.901535] el0t_64_sync+0x1a0/0x1a4
[ 19.901537] ---[ end trace 678c0bf660ad8116 ]---
Fixes: b2e3406a38f0 ("octeontx2-pf: Add support for page pool")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Link: https://lore.kernel.org/r/20231010034842.3807816-1-rkannoth@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2023-10-10
Just one small fix this time around.
Dinghao Liu fixed a potential use-after-free in the ca8210 driver probe
function.
* tag 'ieee802154-for-net-2023-10-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan:
ieee802154: ca8210: Fix a potential UAF in ca8210_probe
====================
Link: https://lore.kernel.org/r/20231010200943.82225-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When there are CT table entries, and you rmmod nfp, the following
events can happen:
task1:
nfp_net_pci_remove
↓
nfp_flower_stop->(asynchronous)tcf_ct_flow_table_cleanup_work(3)
↓
nfp_zone_table_entry_destroy(1)
task2:
nfp_fl_ct_handle_nft_flow(2)
When the execution order is (1)->(2)->(3), it will crash. Therefore, in
the function nfp_fl_ct_del_flow, nf_flow_table_offload_del_cb needs to
be executed synchronously.
At the same time, in order to solve the deadlock problem and the problem
of rtnl_lock sometimes failing, replace rtnl_lock with the private
nfp_fl_lock.
Fixes: 7cc93d888df7 ("nfp: flower-ct: remove callback delete deadlock")
Cc: stable@vger.kernel.org
Signed-off-by: Yanguo Li <yanguo.li@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot has found an uninit-value bug triggered by the dm9601 driver [1].
This error happens because the variable res is not updated if the call
to dm_read_shared_word returns an error. In this particular case -EPROTO
was returned and res stayed uninitialized.
This can be avoided by checking the return value of dm_read_shared_word
and propagating the error if the read operation failed.
[1] https://syzkaller.appspot.com/bug?extid=1f53a30781af65d2c955
Cc: stable@vger.kernel.org
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reported-and-tested-by: syzbot+1f53a30781af65d2c955@syzkaller.appspotmail.com
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Fixes: d0374f4f9c35cdfbee0 ("USB: Davicom DM9601 usbnet driver")
Link: https://lore.kernel.org/r/20231009-topic-dm9601_uninit_mdio_read-v2-1-f2fe39739b6c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2023-10-09
Lukas Magel's patch for the CAN ISO-TP protocol fixes the TX state
detection and wait behavior.
John Watts contributes a patch to only show the sun4i_can Kconfig
option on ARCH_SUNXI.
A patch by Miquel Raynal fixes the soft-reset workaround for Renesas
SoCs in the sja1000 driver.
Markus Schneider-Pargmann's patch for the tcan4x5x m_can glue driver
fixes the id2 register for the tcan4553.
2 patches by Haibo Chen fix the flexcan stop mode for the imx93 SoC.
* tag 'linux-can-fixes-for-6.6-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: tcan4x5x: Fix id2_register for tcan4553
can: flexcan: remove the auto stop mode for IMX93
can: sja1000: Always restart the Tx queue after an overrun
arm64: dts: imx93: add the Flex-CAN stop mode by GPR
can: sun4i_can: Only show Kconfig if ARCH_SUNXI is set
can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior
====================
Link: https://lore.kernel.org/r/20231009085256.693378-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 1e66220948df8 ("net/mlx5e: Update rx ring hw mtu upon each rx-fcs
flag change") seems to have accidentally inverted the logic added in
commit 0bc73ad46a76 ("net/mlx5e: Mutually exclude RX-FCS and
RX-port-timestamp").
The impact of this is a little unclear since it seems the FCS scattered
with RX-FCS is (usually?) correct regardless.
Fixes: 1e66220948df8 ("net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag change")
Tested-by: Charlotte Tan <charlotte@extrahop.com>
Reviewed-by: Charlotte Tan <charlotte@extrahop.com>
Cc: Adham Faris <afaris@nvidia.com>
Cc: Aya Levin <ayal@nvidia.com>
Cc: Tariq Toukan <tariqt@nvidia.com>
Cc: Moshe Shemesh <moshe@nvidia.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Will Mortensen <will@extrahop.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20231006053706.514618-1-will@extrahop.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The adapter->vf_mvs.l list needs to be initialized even if the list is
empty. Otherwise it will lead to crashes.
Fixes: a1cbb15c1397 ("ixgbe: Add macvlan support for VF")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/ZSADNdIw8zFx1xw2@kadam
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When updating the SA, use the new update_pn flags instead of comparing the
new PN with the initial one.
Comparing the initial PN value with the new value will allow the user
to update the SA using the initial PN value as a parameter like this:
$ ip macsec add macsec0 tx sa 0 pn 1 on key 00 \
ead3664f508eb06c40ac7104cdae4ce5
$ ip macsec set macsec0 tx sa 0 pn 1 off
Fixes: 8ff0ac5be144 ("net/mlx5: Add MACsec offload Tx command support")
Fixes: aae3454e4d4c ("net/mlx5e: Add MACsec offload Rx command support")
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Updating the PN is not supported.
Return -EINVAL if update_pn is true.
The following command succeeded, but it should fail because the driver
does not update the PN:
ip macsec set macsec0 tx sa 0 pn 232 on
Fixes: 28c5107aa904 ("net: phy: mscc: macsec support")
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When updating SA, update the PN only when the update_pn flag is true.
Otherwise, the PN will be reset to its previous value using the
following command and this should not happen:
$ ip macsec set macsec0 tx sa 0 on
Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Indicate next PN update using update_pn flag in macsec_context.
Offloaded MACsec implementations does not know whether or not the
MACSEC_SA_ATTR_PN attribute was passed for an SA update and assume
that next PN should always updated, but this is not always true.
The PN can be reset to its initial value using the following command:
$ ip macsec set macsec0 tx sa 0 off #octeontx2-pf case
Or, the update PN command will succeed even if the driver does not support
PN updates.
$ ip macsec set macsec0 tx sa 0 pn 1 on #mscc phy driver case
Comparing the initial PN with the new PN value is not a solution. When
the user updates the PN using its initial value the command will
succeed, even if the driver does not support it. Like this:
$ ip macsec add macsec0 tx sa 0 pn 1 on key 00 \
ead3664f508eb06c40ac7104cdae4ce5
$ ip macsec set macsec0 tx sa 0 pn 1 on #mlx5 case
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When one of the LAG interfaces is in switchdev mode, setting default rule
can't be done.
The interface on which switchdev is running has ice_set_rx_mode() blocked
to avoid default rule adding (and other rules). The other interfaces
(without switchdev running but connected via bond with interface that
runs switchdev) can't follow the same scheme, because rx filtering needs
to be disabled when failover happens. Notification for bridge to set
promisc mode seems like good place to do that.
Fixes: bb52f42acef6 ("ice: Add driver support for firmware changes for LAG")
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Do not set netback interfaces (vifs) default TX queue size to the ring size.
The TX queue size is not related to the ring size, and using the ring size (32)
as the queue size can lead to packet drops. Note the TX side of the vif
interface in the netback domain is the one receiving packets to be injected
to the guest.
Do not explicitly set the TX queue length to any value when creating the
interface, and instead use the system default. Note that the queue length can
also be adjusted at runtime.
Fixes: f942dc2552b8 ('xen network backend driver')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mlxsw_sp2_nve_vxlan_learning_set() function is supposed to return
zero on success or negative error codes. So it needs to be type int
instead of bool.
Fixes: 4ee70efab68d ("mlxsw: spectrum_nve: Add support for VXLAN on Spectrum-2")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If of_clk_add_provider() fails in ca8210_register_ext_clock(),
it calls clk_unregister() to release priv->clk and returns an
error. However, the caller ca8210_probe() then calls ca8210_remove(),
where priv->clk is freed again in ca8210_unregister_ext_clock(). In
this case, a use-after-free may happen in the second time we call
clk_unregister().
Fix this by removing the first clk_unregister(). Also, priv->clk could
be an error code on failure of clk_register_fixed_rate(). Use
IS_ERR_OR_NULL to catch this case in ca8210_unregister_ext_clock().
Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Message-ID: <20231007033049.22353-1-dinghao.liu@zju.edu.cn>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
The ravb_stop() should call cancel_work_sync(). Otherwise,
ravb_tx_timeout_work() is possible to use the freed priv after
ravb_remove() was called like below:
CPU0 CPU1
ravb_tx_timeout()
ravb_remove()
unregister_netdev()
free_netdev(ndev)
// free priv
ravb_tx_timeout_work()
// use priv
unregister_netdev() will call .ndo_stop() so that ravb_stop() is
called. And, after phy_stop() is called, netif_carrier_off()
is also called. So that .ndo_tx_timeout() will not be called
after phy_stop().
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Reported-by: Zheng Wang <zyytlz.wz@163.com>
Closes: https://lore.kernel.org/netdev/20230725030026.1664873-1-zyytlz.wz@163.com/
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20231005011201.14368-3-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In ravb_remove(), dma_free_coherent() should be call after
unregister_netdev(). Otherwise, this controller is possible to use
the freed buffer.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20231005011201.14368-2-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|