summaryrefslogtreecommitdiff
path: root/drivers/ntb
AgeCommit message (Collapse)AuthorFilesLines
2017-08-01ntb: transport shouldn't disable link due to bogus values in SPADsDave Jiang1-3/+1
It seems that under certain scenarios the SPAD can have bogus values caused by an agent (i.e. BIOS or other software) that is not the kernel driver, and that causes memory window setup failure. This should not cause the link to be disabled because if we do that, the driver will never recover again. We have verified in testing that this issue happens and prevents proper link recovery. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> Fixes: 84f766855f61 ("ntb: stop link work when we do not have memory")
2017-07-17ntb: use correct mw_count function in ntb_tool and ntb_transportLogan Gunthorpe2-2/+2
After converting to the new API, both ntb_tool and ntb_transport are using ntb_mw_count to iterate through ntb_peer_get_addr when they should be using ntb_peer_mw_count. This probably isn't an issue with the Intel and AMD drivers but this will matter for any future driver with asymetric memory window counts. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> Fixes: 443b9a14ecbe ("NTB: Alter MW API to support multi-ports devices")
2017-07-06ntb: Add error path/handling to Debug FS entry creationGary R Hook1-7/+13
If a failure occurs when creating Debug FS entries, unroll all of the work that's been done. Signed-off-by: Gary R Hook <gary.hook@amd.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-07-06ntb: Add more debugfs support for ntb_perf testing optionsGary R Hook1-0/+28
The ntb_perf tool uses module parameters to control the characteristics of its test. Enable the changing of these options through debugfs, and eliminating the need to unload and reload the module to make changes and run additional tests. Add a new module parameter that forces the DMA channel selection onto the same node as the NTB device (default: true). - seg_order: Size of the NTB memory window; power of 2. - run_order: Size of the data buffer; power of 2. - use_dma: Use DMA or memcpy? Default: 0. - on_node: Only use DMA channel(s) on the NTB node. Default: true. Signed-off-by: Gary R Hook <gary.hook@amd.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-07-06ntb: Remove debug-fs variables from the context structureGary R Hook1-14/+14
The Debug FS entries manage themselves; we don't need to hang onto them in the context structure. Signed-off-by: Gary R Hook <gary.hook@amd.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-07-06ntb: Add a module option to control affinity of DMA channelsGary R Hook1-4/+12
The DMA channel(s)/memory used to transfer data to an NTB device may not be required to be on the same node as the device. Add a module parameter that allows any candidate channel (aside from node assocation) and allocated memory to be used. Signed-off-by: Gary R Hook <gary.hook@amd.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-07-06NTB: Add IDT 89HPESxNTx PCIe-switches supportSerge Semin6-0/+3895
IDT 89HPESxNTx device series is PCIe-switches, which support Non-Transparent bridging between domains connected to the device ports. Since new NTB API exposes multi-port interface and messaging API, the IDT NT-functions can be now supported in the kernel. This driver adds the following functionality: 1) Multi-port NTB API to have information of possible NT-functions activated in compliance with available device ports. 2) Memory windows of direct and look up table based address translation with all possible combinations of BARs setup. 3) Traditional doorbell NTB API. 4) One-on-one messaging NTB API. There are some IDT PCIe-switch setups, which must be done before any of the NTB peers started. It can be performed either by system BIOS via IDT SMBus-slave interface or by pre-initialized IDT PCIe-switch EEPROM: 1) NT-functions of corresponding ports must be activated using SWPARTxCTL and SWPORTxCTL registers. 2) BAR0 must be configured to expose NT-function configuration registers map. 3) The rest of the BARs must have at least one memory window configured, otherwise the driver will just return an error. Temperature sensor of IDT PCIe-switches can be also optionally activated by BIOS or EEPROM. (See IDT documentations for details of how the pre-initialization can be done) Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-07-06ntb_hw_intel: Style fixes: open code macros that just obfuscate codeLogan Gunthorpe2-100/+95
As per a comments in [1] by Greg Kroah-Hartman, the ndev_* macros should be cleaned up. This makes it more clear what's actually going on when reading the code. [1] http://www.spinics.net/lists/linux-pci/msg56904.html Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-07-06ntb_hw_amd: Style fixes: open code macros that just obfuscate codeLogan Gunthorpe2-29/+29
As per a comments in [1] by Greg Kroah-Hartman, the ndev_* macros should be cleaned up. This makes it more clear what's actually going on when reading the code. [1] http://www.spinics.net/lists/linux-pci/msg56904.html Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-07-06NTB: Add Messaging NTB APISerge Semin1-0/+13
Some IDT NTB-capable PCIe-switches have message registers to communicate with peer devices. This patch adds new NTB API callback methods, which can be used to utilize these registers functionality: ntb_msg_count(); - get number of message registers ntb_msg_inbits(); - get bitfield of inbound message registers status ntb_msg_outbits(); - get bitfield of outbound message registers status ntb_msg_read_sts(); - read the inbound and outbound message registers status ntb_msg_clear_sts(); - clear status bits of message registers ntb_msg_set_mask(); - mask interrupts raised by status bits of message registers. ntb_msg_clear_mask(); - clear interrupts mask bits of message registers ntb_msg_read(midx, *pidx); - read message register with specified index, additionally getting peer port index which data received from ntb_msg_write(midx, pidx); - write data to the specified message register sending it to the passed peer device connected over a pidx port ntb_msg_event(); - notify driver context of a new message event Of course there is hardware which doesn't support Message registers, so this API is made optional. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-07-06NTB: Alter Scratchpads API to support multi-ports devicesSerge Semin6-29/+49
Even though there is no any real NTB hardware, which would have both more than two ports and Scratchpad registers, it is logically correct to have Scratchpad API accepting a peer port index as well. Intel/AMD drivers utilize Primary and Secondary topology to split Scratchpad between connected root devices. Since port-index API introduced, Intel/AMD NTB hardware drivers can use device port to determine which Scratchpad registers actually belong to local and peer devices. The same approach can be used if some potential hardware in future will be multi-port and have some set of Scratchpads. Here are the brief of changes in the API: ntb_spad_count() - return number of Scratchpads per each port ntb_peer_spad_addr(pidx, sidx) - address of Scratchpad register of the peer device with pidx-index ntb_peer_spad_read(pidx, sidx) - read specified Scratchpad register of the peer with pidx-index ntb_peer_spad_write(pidx, sidx) - write data to Scratchpad register of the peer with pidx-index Since there is hardware which doesn't support Scratchpad registers, the corresponding API methods are now made optional. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-07-06NTB: Alter MW API to support multi-ports devicesSerge Semin6-62/+179
Multi-port NTB devices permit to share a memory between all accessible peers. Memory Windows API is altered to correspondingly initialize and map memory windows for such devices: ntb_mw_count(pidx); - number of inbound memory windows, which can be allocated for shared buffer with specified peer device. ntb_mw_get_align(pidx, widx); - get alignment and size restriction parameters to properly allocate inbound memory region. ntb_peer_mw_count(); - get number of outbound memory windows. ntb_peer_mw_get_addr(widx); - get mapping address of an outbound memory window If hardware supports inbound translation configured on the local ntb port: ntb_mw_set_trans(pidx, widx); - set translation address of allocated inbound memory window so a peer device could access it. ntb_mw_clear_trans(pidx, widx); - clear the translation address of an inbound memory window. If hardware supports outbound translation configured on the peer ntb port: ntb_peer_mw_set_trans(pidx, widx); - set translation address of a memory window retrieved from a peer device ntb_peer_mw_clear_trans(pidx, widx); - clear the translation address of an outbound memory window Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-07-06NTB: Alter link-state API to support multi-port devicesSerge Semin2-2/+2
Multi-port devices permit the NTB connections between multiple domains, so a local device can have NTB link being up with one peer and being down with another. NTB link-state API is appropriately altered to return a bitfield of the link-states between the local device and possible peers. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-07-06NTB: Add indexed ports NTB APISerge Semin5-0/+75
There is some NTB hardware, which can combine more than just two domains over NTB. For instance, some IDT PCIe-switches can have NTB-functions activated on more than two-ports. The different domains are distinguished by ports they are connected to. So the new port-related methods are added to the NTB API: ntb_port_number() - return local port ntb_peer_port_count() - return number of peers local port can connect to ntb_peer_port_number(pdix) - return port number by it index ntb_peer_port_idx(port) - return port index by it number Current test-drivers aren't changed much. They still support two-ports devices for the time being while multi-ports hardware drivers aren't added. By default port-related API is declared for two-ports hardware. So corresponding hardware drivers won't need to implement it. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-06-19ntb: no sleep in ntb_async_tx_submitAllen Hubbe1-43/+7
Do not sleep in ntb_async_tx_submit, which could deadlock. This reverts commit "8c874cc140d667f84ae4642bb5b5e0d6396d2ca4" Fixes: 8c874cc140d6 ("NTB: Address out of DMA descriptor issue with NTB") Reported-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: Allen Hubbe <Allen.Hubbe@dell.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-06-19ntb: ntb_hw_intel: Skylake doorbells should be 32bits, not 64bitsDave Jiang1-1/+1
Fixing doorbell register length to 32bits per spec. On Skylake NTB, the doorbell registers are 32bit write only registers. The source for the doorbell is a 64bit register that shows the interrupt bits. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Fixes: 783dfa6cc41b ("ntb: Adding Skylake Xeon NTB support") Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-06-19ntb_transport: fix bug calculating num_qps_mwLogan Gunthorpe1-2/+2
A divide by zero error occurs if qp_count is less than mw_count because num_qps_mw is calculated to be zero. The calculation appears to be incorrect. The requirement is for num_qps_mw to be set to qp_count / mw_count with any remainder divided among the earlier mws. For example, if mw_count is 5 and qp_count is 12 then mws 0 and 1 will have 3 qps per window and mws 2 through 4 will have 2 qps per window. Thus, when mw_num < qp_count % mw_count, num_qps_mw is 1 higher than when mw_num >= qp_count. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Fixes: e26a5843f7f5 ("NTB: Split ntb_hw_intel and ntb_transport drivers") Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-06-19ntb_transport: fix qp count bugLogan Gunthorpe1-2/+2
In cases where there are more mw's than spads/2-2, the mw count gets reduced to match the limitation. ntb_transport also tries to ensure that there are fewer qps than mws but uses the full mw count instead of the reduced one. When this happens, the math in 'ntb_transport_setup_qp_mw' will get confused and result in a kernel paging request bug. This patch fixes the bug by reducing qp_count to the reduced mw count instead of the full mw count. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Fixes: e26a5843f7f5 ("NTB: Split ntb_hw_intel and ntb_transport drivers") Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-06-19ntb: Correct modinfo usage statement for ntb_perfGary R Hook1-2/+2
The order parameters are powers of 2; adjust the usage information to use correct mathematical representations. Signed-off-by: Gary R Hook <gary.hook@amd.com> Fixes: 8a7b6a778a85 ("ntb: ntb perf tool") Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-02-17ntb: ntb_hw_intel: link_poll isn't clearing the pending status properlyDave Jiang1-1/+23
On Skylake hardware, the link_poll isn't clearing the pending interrupt bit. Adding a new function for SKX that handles clearing of status bit the right way. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Fixes: 783dfa6c ("ntb: Adding Skylake Xeon NTB support") Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-02-17ntb_transport: Pick an unused queueThomas VanSelus1-1/+1
Fix typo causing ntb_transport_create_queue to select the first queue every time, instead of using the next free queue. Signed-off-by: Thomas VanSelus <tvanselus@xes-inc.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Fixes: fce8a7bb5 ("PCI-Express Non-Transparent Bridge Support") Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-02-17ntb: ntb_perf missing dmaengine_unmap_putDave Jiang1-0/+2
In the normal I/O execution path, ntb_perf is missing a call to dmaengine_unmap_put() after submission. That causes us to leak unmap objects. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Fixes: 8a7b6a77 ("ntb: ntb perf tool") Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-02-17NTB: ntb_transport: fix debugfs_remove_recursiveAllen Hubbe1-2/+1
The call to debugfs_remove_recursive(qp->debugfs_dir) of the sub-level directory must not be later than debugfs_remove_recursive(nt_debugfs_dir) of the top-level directory. Otherwise, the sub-level directory will not exist, and it would be invalid (panic) to attempt to remove it. This removes the top-level directory last, after sub-level directories have been cleaned up. Signed-off-by: Allen Hubbe <Allen.Hubbe@dell.com> Fixes: e26a5843f ("NTB: Split ntb_hw_intel and ntb_transport drivers") Signed-off-by: Jon Mason <jdmason@kudzu.us>
2016-12-24ntb_transport: Remove unnecessary call to ntb_peer_spad_readSteve Wahl1-1/+0
The results were previously ignored, anyway. Signed-off-by: Steve Wahl <Steve.Wahl@dell.com> Fixes: e26a5843f7f5014ae4460030ca4de029a3ac35d3 Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2016-12-24NTB: Fix 'request_irq()' and 'free_irq()' inconsistancyChristophe JAILLET2-2/+2
'request_irq()' and 'free_irq()' should have the same 'dev_id'. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2016-12-24ntb: fix SKX NTB config space size register offsetsDave Jiang1-4/+4
The offsets for the SZ registers are wrong. Updated. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reported-by: Sandeep Mann <sandeep@purestorage.com> Tested-by: Zachary Ross <zacharyx.ross@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2016-12-24ntb_transport: Limit memory windows based on available, scratchpadsShyam Sundar S K1-12/+16
When the underlying NTB H/W driver advertises more memory windows than the number of scratchpads available to setup MW's, it is likely that we may end up filling the remaining memory windows with garbage. So to avoid that, lets limit the memory windows that transport driver can setup based on the available scratchpads. Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2016-12-24NTB: Register and offset values fix for memory windowShyam Sundar S K1-10/+4
Due to incorrect limit and translation register values, NTB link was going down when the memory window was setup. Made appropriate changes as per spec. Fix limit register values for BAR1, which was overlapping with the BAR23 address. Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2016-12-24NTB: add support for hotplug featureXiangliang Yu2-2/+12
AMD NTB support hotplug under B2B mode. NTB will trigger link up/down interrupt event when doing plug add/remove, this patch implements the two interrupt event to support B2B hotplug function. Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2016-12-24ntb: Adding Skylake Xeon NTB supportDave Jiang2-5/+703
The Skylake Xeon NTB hardware has made some changes to the register name, offset, and the way doorbells work. Adding driver support for the new hardware. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2016-11-14ntb_perf: potential info leak in debugfsDan Carpenter1-3/+3
This is a static checker warning, not something I'm desperately concerned about. But snprintf() returns the number of bytes that would have been copied if there were space. We really care about the number of bytes that actually were copied so we should use scnprintf() instead. It probably won't overrun, and in that case we may as well just use sprintf() but these sorts of things make static checkers and code reviewers happier. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2016-11-14ntb: ntb_hw_intel: init peer_addr in struct intel_ntb_devDave Jiang1-0/+3
The peer_addr member of intel_ntb_dev is not set, therefore when acquiring ntb_peer_db and ntb_peer_spad we only get the offset rather than the actual physical address. Adding fix to correct that. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2016-11-14ntb: make DMA_OUT_RESOURCE_TO HZ independentNicholas Mc Guire1-1/+1
schedule_timeout_* takes a timeout in jiffies but the code currently is passing in a constant which makes this timeout HZ dependent, so pass it through msecs_to_jiffies() to fix this up. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2016-11-14ntb_transport: make DMA_OUT_RESOURCE_TO HZ independentNicholas Mc Guire1-1/+1
schedule_timeout_* takes a timeout in jiffies but the code currently is passing in a constant which makes this timeout HZ dependent, so pass it through msecs_to_jiffies() to fix this up. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2016-11-14NTB: ntb_hw_intel: Fix typo in module parameter descriptionsWei Yongjun1-6/+6
Fix typo in module parameter descriptions. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Acked-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2016-11-14ntb_pingpong: Fix db_init parameter descriptionWei Yongjun1-1/+1
Fix 'db_init' parameter description. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Acked-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2016-08-08ntb: add DMA error handling for RX DMADave Jiang1-16/+67
Adding support on the rx DMA path to allow recovery of errors when DMA responds with error status and abort all the subsequent ops. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Allen Hubbe <Allen.Hubbe@emc.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: linux-ntb@googlegroups.com Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-08ntb: add DMA error handling for TX DMADave Jiang1-27/+83
Adding support on the tx DMA path to allow recovery of errors when DMA responds with error status and abort all the subsequent ops. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Allen Hubbe <Allen.Hubbe@emc.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: linux-ntb@googlegroups.com Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-05NTB: ntb_hw_intel: use local variable pdevAllen Hubbe1-5/+5
Clean up duplicated expression by replacing it with the equivalent local variable pdev. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2016-08-05NTB: ntb_hw_intel: show BAR size in debugfs infoAllen Hubbe1-1/+38
It will be useful to know the hardware configured BAR size to diagnose issues with NTB memory windows. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2016-08-05ntb_perf: clear link_is_up flag when the link goes down.Logan Gunthorpe1-19/+9
When the link goes down, the link_is_up flag did not return to false. This could have caused some subtle corner case bugs when the link goes up and down quickly. Once that was fixed, there was found to be a race if the link was brought down then immediately up. The link_cleanup work would occasionally be scheduled after the next link up event. This would cancel the link_work that was supposed to occur and leave ntb_perf in an unusable state. To fix this we get rid of the link_cleanup work and put the actions directly in the link_down event. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2016-08-05ntb_pingpong: Add a debugfs file to get the ping countLogan Gunthorpe1-1/+61
This commit adds a debugfs 'count' file to ntb_pingpong. This is so testing with ntb_pingpong can be automated beyond just checking the logs for pong messages. The count file returns a number which increments every pong. The counter can be cleared by writing a zero. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2016-08-05ntb_tool: Add link status and files to debugfsLogan Gunthorpe1-0/+92
In order to more successfully script with ntb_tool it's useful to have a link file to check the link status so that the script doesn't use the other files until the link is up. This commit adds a 'link' file to the debugfs directory which reads boolean (Y or N) depending on the link status. Writing to the file change the link state using ntb_link_enable or ntb_link_disable. A 'link_event' file is also provided so an application can block until the link changes to the desired state. If the user writes a 1, it will block until the link is up. If the user writes a 0, it will block until the link is down. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2016-08-05ntb_tool: Postpone memory window initialization for the userLogan Gunthorpe1-138/+228
In order to make the interface closer to the raw NTB API, this commit changes memory windows so they are not initialized on link up. Instead, the 'peer_trans*' debugfs files are introduced. When read, they return information provided by ntb_mw_get_range. When written, they create a buffer and initialize the memory window. The value written is taken as the requested size of the buffer (which is then rounded for alignment). Writing a value of zero frees the buffer and tears down the memory window translation. The 'peer_mw*' file is only created once the memory window translation is setup by the user. Additionally, it was noticed that the read and write functions for the 'peer_mw*' files should have checked for a NULL pointer. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2016-08-05ntb_perf: Wait for link before running testLogan Gunthorpe1-1/+4
Instead of returning immediately with an error when the link is down, wait for the link to come up (or the user sends a SIGINT). This is to make scripting ntb_perf easier. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2016-08-05ntb_perf: Return results by reading the run fileLogan Gunthorpe1-12/+55
Instead of having to watch logs, allow the results to be retrieved by reading back the run file. This file will return "running" when the test is running and nothing if no tests have been run yet. It returns 1 line per thread, and will display an error message if the corresponding thread returns an error. With the above change, the pr_info calls that returned the results are then changed to pr_debug calls. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2016-08-05ntb_perf: Improve thread handling to increase robustnessLogan Gunthorpe1-48/+76
This commit accomplishes a few things: 1) Properly prevent multiple sets of threads from running at once using a mutex. Lots of race issues existed with the thread_cleanup. 2) The mutex allows us to ensure that threads are finished before tearing down the device or module. 3) Don't use kthread_stop when the threads can exit by themselves, as this is counter-indicated by the kthread_create documentation. Threads now wait for kthread_stop to occur. 4) Writing to the run file now blocks until the threads are complete. The test can then be safely interrupted by a SIGINT. Also, while I was at it: 5) debugfs_run_write shouldn't return 0 in the early check cases as this could cause debugfs_run_write to loop undesirably. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2016-08-05ntb_perf: Schedule based on time not on performanceLogan Gunthorpe1-2/+4
When debugging performance problems, if some issue causes the ntb hardware to be significantly slower than expected, ntb_perf will hang requiring a reboot because it only schedules once every 4GB. Instead, schedule based on jiffies so it will not hang the CPU if the transfer is slow. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2016-08-05ntb_transport: Check the number of spads the hardware supportsLogan Gunthorpe2-4/+13
I'm working on hardware that currently has a limited number of scratchpad registers and ntb_ndev fails with no clue as to why. I feel it is better to fail early and provide a reasonable error message then to fail later on. The same is done to ntb_perf, but it doesn't currently require enough spads to actually fail. I've also removed the unused SPAD_MSG and SPAD_ACK enums so that MAX_SPAD accurately reflects the number of spads used. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2016-08-05ntb_tool: Add memory window debug supportLogan Gunthorpe1-1/+257
We allocate some memory window buffers when the link comes up, then we provide debugfs files to read/write each side of the link. This is useful for debugging the mapping when writing new drivers. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>