| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The expected result value for the call to of_count_phandle_with_args()
was updated from 7 to 8, but the accompanying error message was
forgotten.
Fixes: 4dde83569832f937 ("of: Fix double free in of_parse_phandle_with_args_map")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240111085025.2073894-1-geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
In of_parse_phandle_with_args_map() the inner loop that
iterates through the map entries calls of_node_put(new)
to free the reference acquired by the previous iteration
of the inner loop. This assumes that the value of "new" is
NULL on the first iteration of the inner loop.
Make sure that this is true in all iterations of the outer
loop by setting "new" to NULL after its value is assigned to "cur".
Extend the unittest to detect the double free and add an additional
test case that actually triggers this path.
Fixes: bd6f2fd5a1 ("of: Support parsing phandle argument lists through a nexus node")
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: "Christian A. Ehrhardt" <lk@c--e.de>
Link: https://lore.kernel.org/r/20231229105411.1603434-1-lk@c--e.de
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Add tests to exercise address translations based on ranges properties.
Tests added cover "default" (2cell) address translations, "default
flags" (3cell) address translations and PCI address translations.
They also cover PCI BAR translations introduced in commit 407d1a51921e
("PCI: Create device tree node for bridge").
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20231017110221.189299-4-herve.codina@bootlin.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
of_unittest_pci_node test depends on both CONFIG_PCI_DYNAMIC_OF_NODES
and CONFIG_OF_OVERLAY. Move the test into the existing
CONFIG_OF_OVERLAY ifdef and rework the CONFIG_PCI_DYNAMIC_OF_NODES
dependency to use IS_ENABLED() instead. This reduces the combinations to
build.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308241954.oRNfVqmB-lkp@intel.com/
Fixes: 26409dd04589 ("of: unittest: Add pci_dt_testdrv pci driver")
Cc: Lizhi Hou <lizhi.hou@amd.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230824221743.1581707-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Add a test to exercise the error paths when trying to apply an overlay
with an unresolved symbol and cleaning up the resulting partial state.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/580394587976975770c84411896fce9fbbcf25fa.1690533838.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
It is hard to see the start and end of each individual test in
of_unittest_overlay_high_level(). Add visual cues in the form of
separator comments, like was done in of_unittest_overlay_notify().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/84530100a54a1fac932008057746015e65bc4d9a.1690533838.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
When of_overlay_fdt_apply() fails, the changeset may be partially
applied, and the caller is still expected to call of_overlay_remove() to
clean up this partial state. However, overlay_17 is the only test that
takes care of cleaning up after an (expected) failure.
Instead of adding cleanup code to each individual test, extend
overlay_info with the optional expected return value of
of_overlay_remove(), and handle cleanup in the overlay_data_apply()
helper. While at it, simplify the end marker in the overlay_info table.
Update the expected error output for errors during the newly cleanup.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/594a6a8934e5569bf96d317a6a3c0a9129a2ae20.1690533838.git.geert+renesas@glider.be
[robh: update and fix EXPECT messages]
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
of_unittest_apply_overlay_check() and the first part of
of_unittest_apply_revert_overlay_check() are identical.
Reduce code duplication by replacing them by two wrappers around a
common helper.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/4bafe338655beab6b244047e737c0c2aa60b613d.1690533838.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Miscellaneous improvements for the apply and apply/revert checks,
making them more similar:
- Fix inverted comment for before state check,
- Add more comments to improve symmetry,
- Fix grammar s/must be to set to/must be in/,
- Avoid saying "create" in messages, as the actual operation depends
on the value of the before/after parameters.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/326ecfe0889c53d2cfff31b3bf950d0b70be225f.1690533838.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
When updating the expected error messages for the
overlay_bad_add_dup_prop test, indentation of the EXPECT_END()
statements was accidentally changed.
Fixes: 29acfb65598f9167 ("of: unittest: kmemleak in duplicate property update")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c9bd81b74b0a1ab394ac7ff8819e6fb032fe8ded.1690533838.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The removal check in of_unittest_apply_revert_overlay_check()
always uses the platform device overlay type, while it should use the
actual overlay type, as passed as a parameter to the function.
This has no impact on any current test, as all tests calling
of_unittest_apply_revert_overlay_check() use the platform device overlay
type.
Fixes: d5e75500ca401d31 ("of: unitest: Add I2C overlay unit tests.")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ba0234c41ba808f10112094f88792beeb6dbaedf.1690533838.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Enhance the changeset unittest to ensure after a revert, the tree matches
the original tree before the changeset was applied. Specifically, check an
added node is removed, a removed property is added back, and an updated
property has its original value.
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Run the test for the overlay apply/revert sequence three times, to
test if there are unbalanced of_node_put() calls causing reference
counts to become negative.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/a9fb4eb560c58d11a7f167bc78a137b46e76cf15.1692699743.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
pci_dt_testdrv is bound to QEMU PCI Test Device. It reads
overlay_pci_node fdt fragment and apply it to Test Device. Then it
calls of_platform_default_populate() to populate the platform
devices.
Tested-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/1692120000-46900-6-git-send-email-lizhi.hou@amd.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Currently, in an overlay fdt fragment, it needs to specify the exact
location in base DT. In another word, when the fdt fragment is generated,
the base DT location for the fragment is already known.
There is new use case that the base DT location is unknown when fdt
fragment is generated. For example, the add-on device provide a fdt
overlay with its firmware to describe its downstream devices. Because it
is add-on device which can be plugged to different systems, its firmware
will not be able to know the overlay location in base DT. Instead, the
device driver will load the overlay fdt and apply it to base DT at runtime.
In this case, of_overlay_fdt_apply() needs to be extended to specify
the target node for device driver to apply overlay fdt.
int overlay_fdt_apply(..., struct device_node *base);
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/1692120000-46900-5-git-send-email-lizhi.hou@amd.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
of_changeset_create_node() creates device node dynamically and attaches
the newly created node to a changeset.
Expand of_changeset APIs to handle specific types of properties.
of_changeset_add_prop_string()
of_changeset_add_prop_string_array()
of_changeset_add_prop_u32_array()
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/1692120000-46900-2-git-send-email-lizhi.hou@amd.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Pick up changeset fixes for further rework.
|
|
Commit 12e17243d8a1 ("of: base: improve error msg in
of_phandle_iterator_next()") added printing of the phandle value on
error, but failed to update the unittest.
Fixes: 12e17243d8a1 ("of: base: improve error msg in of_phandle_iterator_next()")
Cc: stable@vger.kernel.org
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230801-dt-changeset-fixes-v3-1-5f0410e007dd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The driver depends on CONFIG_OF, it is not necessary to use
of_match_ptr() here.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230808094043.2732158-1-ruanjinjie@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
when kmalloc() fail to allocate memory in kasprintf(), name
or full_name will be NULL, strcmp() will cause
null pointer dereference.
Fixes: 0d638a07d3a1 ("of: Convert to using %pOF instead of full_name")
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230727080246.519539-1-ruanjinjie@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Add some missing type definitions to properties
- Drop unneeded quotes and use absolute paths in bindings
- Remove redundant "binding" or "schema" in binding titles
- Add bindings for Ralink SoCs interrupt controller, QCA2066
Bluetooth, infineon,irps5401, new NXP i.MX GPT variants, shineworld
lh133k MIPI SPI panel, Socionext Synquacer platforms, RK3588 PCIe,
ST M95640 EEPROM, and FSL DCP crypto variants, and Arm Cortex-R52
DT core:
- Improve the reserved-memory range allocation to maximize contiguous
space
- Use device_set_node() helper in place of open coding"
* tag 'devicetree-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (40 commits)
dt-bindings: interrupt-controller: add Ralink SoCs interrupt controller
dt-bindings: PCI: dwc: rockchip: Update for RK3588
dt-bindings: auxdisplay: holtek: Add missing type for "linux,no-autorepeat"
dt-bindings: input: mediatek,pmic-keys: Fix typo in "linux,keycodes" property name
dt-bindings: pwm: drop unneeded quotes
dt-bindings: crypto: drop unneeded quotes
dt-bindings: arm: socionext: add Synquacer platforms
dt-bindings: connector: usb: allow a single HS port
dt-bindings: bus: ti-sysc: fix typo
of: reserved_mem: Use stable allocation order
of: reserved_mem: Try to keep range allocations contiguous
dt-bindings: arm: drop unneeded quotes and use absolute /schemas path
dt-bindings: firmware: arm,scmi: drop unneeded quotes and use absolute /schemas path
dt-bindings: dvfs: drop unneeded quotes
dt-bindings: gpu: drop unneeded quotes
dt-bindings: i3c: silvaco,i3c-master: drop unneeded quotes
dt-bindings: rockchip: grf: drop unneeded quotes
dt-bindings: spmi: mtk,spmi-mtk-pmif: drop unneeded quotes
dt-bindings: Remove last usage of "binding" or "schema" in titles
dt-bindings: display: panel: mipi-dbi-spi: add spi-3wire property
...
|
|
These have now been demoted to debug and are normally hidden. Drop the
assertions entirely.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
|
|
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230525204812.733642-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Drivers should be silent when they work correctly. There's no reason to
emit info messages when GPIO lines are hogged. Demote the message to
debug.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Suggested-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
- First part of DT header detangling dropping cpu.h from of_device.h
and replacing some includes with forward declarations. A handful of
drivers needed some adjustment to their includes as a result.
- Refactor of_device.h to be used by bus drivers rather than various
device drivers. This moves non-bus related functions out of
of_device.h. The end goal is for of_platform.h and of_device.h to
stop including each other.
- Refactor open coded parsing of "ranges" in some bus drivers to use DT
address parsing functions
- Add some new address parsing functions of_property_read_reg(),
of_range_count(), and of_range_to_resource() in preparation to
convert more open coded parsing of DT addresses to use them.
- Treewide clean-ups to use of_property_read_bool() and
of_property_present() as appropriate. The ones here are the ones that
didn't get picked up elsewhere.
* tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
bus: tegra-gmi: Replace of_platform.h with explicit includes
hte: Use of_property_present() for testing DT property presence
w1: w1-gpio: Use of_property_read_bool() for boolean properties
virt: fsl: Use of_property_present() for testing DT property presence
soc: fsl: Use of_property_present() for testing DT property presence
sbus: display7seg: Use of_property_read_bool() for boolean properties
sparc: Use of_property_read_bool() for boolean properties
sparc: Use of_property_present() for testing DT property presence
bus: mvebu-mbus: Remove open coded "ranges" parsing
of/address: Add of_property_read_reg() helper
of/address: Add of_range_count() helper
of/address: Add support for 3 address cell bus
of/address: Add of_range_to_resource() helper
of: unittest: Add bus address range parsing tests
of: Drop cpu.h include from of_device.h
OPP: Adjust includes to remove of_device.h
irqchip: loongson-eiointc: Add explicit include for cpuhotplug.h
cpuidle: Adjust includes to remove of_device.h
cpufreq: sun50i: Add explicit include for cpu.h
cpufreq: Adjust includes to remove of_device.h
...
|
|
Add a helper, of_property_read_reg(), to read "reg" entries untranslated
address and size. This function is intended mainly for cases with an
untranslatable "reg" address (i.e. not MMIO). There's also a few
translatable cases such as address cells containing a bus chip-select
number.
Link: https://lore.kernel.org/r/20230328-dt-address-helpers-v1-5-e2456c3e77ab@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Some users need a count of the number of ranges entries before
iterating over the entries. Typically this is for allocating some data
structure based on the size. Add a helper, of_range_count(), to get the
count. The helper must be called with an struct of_range_parser
initialized by of_range_parser_init().
Link: https://lore.kernel.org/r/20230328-dt-address-helpers-v1-4-e2456c3e77ab@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
There's a few custom bus bindings (e.g. fsl,qoriq-mc) which use a
3 cell format with custom flags in the high cell. We can match these
buses as a fallback if we didn't match on PCI bus which is the only
standard bus binding with 3 address cells.
Link: https://lore.kernel.org/r/20230328-dt-address-helpers-v1-3-e2456c3e77ab@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
A few users need to convert a specific "ranges" entry into a struct
resource. Add a helper to similar to of_address_to_resource(). The
existing of_pci_range_to_resource() helper isn't really PCI specific,
so it can be used with the CONFIG_PCI check dropped.
Link: https://lore.kernel.org/r/20230328-dt-address-helpers-v1-2-e2456c3e77ab@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
While there are tests for "dma-ranges" helpers, "ranges" is missing any
tests. It's the same underlying code, but for completeness add a test
for "ranges" parsing iterators. This is in preparation to add some
additional "ranges" helpers.
Link: https://lore.kernel.org/r/20230328-dt-address-helpers-v1-1-e2456c3e77ab@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230319100620.295849-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
unittest_gpio_remove() is only called after unittest_gpio_probe() completed
successfully. In this case driver data was set to a non-NULL value and so
platform_get_drvdata() never returns NULL.
Also note that the compiler might optimize away this check anyhow as
devptr was already dereferenced for the dev_dbg call above.
Drop this if block.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230319100620.295849-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The driver core already unsets driver data after .remove() completes.
So there is no reason to do this explicitly in the driver itself.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230319100620.295849-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Add tests to exercise the actions that occur when the reference count
of devicetree nodes decrement to zero and beyond. Decrementing to
zero triggers freeing memory allocated for the node.
This commit will expose a pr_err() issue in of_node_release(), resulting
in some kernal warnings and stack traces.
When scripts/dtc/of_unittest_expect processes the console messages,
it will also report related problems for EXPECT messages due to the
pr_err() issue:
** missing EXPECT begin : 5
Signed-off-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20230213185702.395776-5-frowand.list@gmail.com
[robh: Fix !CONFIG_OF_DYNAMIC build]
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
In struct i2c_driver, field new_probe replaces the soon to be deprecated
field probe. Update unittest for this change. The probe function
doesn't make use of the i2c_device_id * parameter so it can be trivially
converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20221118224540.619276-510-uwe@kleine-koenig.org
[robh: Add Frank's commit msg addition]
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
In drivers/of/unittest-data/:
- Rename .dts overlay source files to use .dtso suffix.
Modify driver/of/unitest.c to use .dtbo.o based symbols instead of .dtb.o
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Tested-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20221024173434.32518-4-afd@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Fix node refcounting in of_find_last_cache_level()
- Constify device_node in of_device_compatible_match()
- Fix 'dma-ranges' handling in bus controller nodes
- Fix handling of initrd start > end
- Improve error reporting in of_irq_init()
- Taint kernel on DT unittest running
- Use strscpy instead of strlcpy
- Add a build target, dt_compatible_check, to check for compatible
strings used in kernel sources against compatible strings in DT
schemas.
- Handle DT_SCHEMA_FILES changes when rebuilding
DT bindings:
- LED bindings for MT6370 PMIC
- Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller,
mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc,
and arm,versatile-sysreg to DT schema format
- Add nvmem cells to u-boot,env schema
- Add more LED_COLOR_ID definitions
- Require 'opp-table' uses to be a node
- Various schema fixes to match QEMU 'virt' DT usage
- Tree wide dropping of redundant 'Device Tree Binding' in schema
titles
- More (unevaluated|additional)Properties fixes in schema child nodes
- Drop various redundant minItems equal to maxItems"
* tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (62 commits)
of: base: Shift refcount decrement in of_find_last_cache_level()
dt-bindings: leds: Add MediaTek MT6370 flashlight
dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator
dt-bindings: mailbox: Convert mtk-gce to DT schema
of: base: make of_device_compatible_match() accept const device node
of: Fix "dma-ranges" handling for bus controllers
of: fdt: Remove unused struct fdt_scan_status
dt-bindings: display: st,stm32-dsi: Handle data-lanes in DSI port node
dt-bindings: timer: Add power-domains for TI timer-dm on K3
dt: Add a check for undocumented compatible strings in kernel
kbuild: take into account DT_SCHEMA_FILES changes while checking dtbs
dt-bindings: interrupt-controller: migrate MIPS CPU interrupt controller text bindings to YAML
dt-bindings: i2c: migrate mt7621 text bindings to YAML
dt-bindings: power: gpcv2: correct patternProperties
dt-bindings: virtio: Convert virtio,pci-iommu to DT schema
dt-bindings: timer: arm,arch_timer: Allow dual compatible string
dt-bindings: arm: cpus: Add kryo240 compatible
dt-bindings: display: bridge: nxp,tda998x: Convert to json-schema
dt-bindings: nvmem: u-boot,env: add basic NVMEM cells
dt-bindings: remoteproc: qcom,adsp: enforce smd-edge schema
...
|
|
Make OF unittest trigger the new TAINT_TEST taint when OF unittest runs.
Due to OF unittest not being intended to run on production systems, and
potentially causing problems (or security issues like leaking kernel
addresses), the kernel's state should not be considered safe for
production use after OF unittest runs.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lore.kernel.org/r/20220823200152.3465751-1-frowand.list@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220818210054.7157-1-wsa+renesas@sang-engineering.com
|
|
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
On the ->remove() stage the callback uses physical device node instead of one
from GPIO chip and the variable name which is different to one used in
unittest_gpio_probe(). Make these consistent with unittest_gpio_probe().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220708214539.7254-2-andriy.shevchenko@linux.intel.com
|
|
The OF node in the GPIO library is deprecated and soon will be removed.
GPIO library now accepts fwnode as a firmware node, so switch the module
to use it instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220708214539.7254-1-andriy.shevchenko@linux.intel.com
|
|
New unittests for overlay notifiers reveal a memory leak in
of_overlay_apply() when a notifier returns an error for action
OF_OVERLAY_POST_APPLY. The pr_err() message is:
OF: ERROR: memory leak, expected refcount 1 instead of 3,
of_node_get()/of_node_put() unbalanced - destroy cset entry: attach
overlay node /testcase-data/overlay-node/test-bus/test-unittest17
Change the error path to no longer call free_overlay_changeset(),
and document that the caller of of_overlay_fdt_apply() may choose
to remove the overlay.
Update the unittest that triggered the error to expect the changed
return values and to call of_overlay_remove().
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220502181742.1402826-4-frowand.list@gmail.com
|
|
Add tests for overlay apply and remove notifiers. Trigger errors
for each of the notifier actions.
These tests will reveal a memory leak problem when a notifier returns
an error for action OF_OVERLAY_POST_APPLY. The pr_err() message is:
OF: ERROR: memory leak, expected refcount 1 instead of 3,
of_node_get()/of_node_put() unbalanced - destroy cset entry: attach
overlay node /testcase-data/overlay-node/test-bus/test-unittest17
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220502181742.1402826-3-frowand.list@gmail.com
|
|
Pull in DT binding warning fixes
|
|
Printing the devicetree unittest pass message for each passed test
creates much console verbosity. The existing pass messages are
printed at loglevel KERN_DEBUG so they will not print by default.
Change default to print the pass messages at loglevel PR_INFO so
they will print with the default console loglevel.
The test community expects either a pass or a fail message for each
test in a test suite. The messages are typically post-processed to
report pass/fail results.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220210230819.3303212-1-frowand.list@gmail.com
|
|
The text of various warning messages triggered by unittest has
changed. Update the text of expected warnings to match.
The expected vs actual warnings are most easily seen by filtering
the boot console messages with the of_unittest_expect program at
https://github.com/frowand/dt_tools.git. The filter prefixes
problem lines with '***', and prefixes lines that match expected
errors with 'ok '. All other lines are prefixed with ' '.
Unrelated lines have been deleted in the following examples.
The mismatch appears as:
-> ### dt-test ### start of unittest - you will see error messages
OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1
** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1
OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1
** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1
OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1
** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found -1
platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found
** of_unittest_expect WARNING - not found ---> platform testcase-data:testcase-device2: IRQ index 0 not found
-> ### dt-test ### end of unittest - 254 passed, 0 failed
** EXPECT statistics:
**
** EXPECT found : 42
** EXPECT not found : 4
With this commit applied, the mismatch is resolved:
-> ### dt-test ### start of unittest - you will see error messages
ok OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1
ok OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1
ok OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1
ok platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found
-> ### dt-test ### end of unittest - 254 passed, 0 failed
** EXPECT statistics:
**
** EXPECT found : 46
** EXPECT not found : 0
Fixes: 2043727c2882 ("driver core: platform: Make use of the helper function dev_err_probe()")
Fixes: 94a4950a4acf ("of: base: Fix phandle argument length mismatch error message")
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220127192643.2534941-1-frowand.list@gmail.com
|
|
Eliminate the following coccicheck warning:
./drivers/of/unittest.c:1961:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220107002826.77939-1-yang.lee@linux.alibaba.com
|
|
Some overlays are tracked when they are applied. The tracked overlays
are later removed after the overlay tests are completed. The old
implementation makes assumptions about the expected values for
overlay changeset id created by the overlay apply which result
in fragile code. The new code removes the assumptions.
A symptom that exposes a problem with the tracking code is a
warning "UBSAN: shift-out-of-bounds in drivers/of/unittest.c:1933:36",
Kernel Version: 5.15-rc7, PPC-64, Talos II. This results from variable
"id" value of -1 in the final line of of_unittest_untrack_overlay().
Reported-by: erhard_f@mailbox.org
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220101033329.1277779-3-frowand.list@gmail.com
|
|
Unittest inconsistently interchanges overlay changeset id and
overlay id. Change variable names of overlay id to overlay
changeset id.
Do not fix variable names in the overlay tracking functions
of_unittest_overlay_tracked(), of_unittest_track_overlay(), and
of_unittest_destroy_tracked_overlays() which will be replaced in
a following commit.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220101033329.1277779-2-frowand.list@gmail.com
|
