summaryrefslogtreecommitdiff
path: root/drivers/of
AgeCommit message (Collapse)AuthorFilesLines
2015-02-18Merge tag 'pci-v3.20-fixes-1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI resource management fix from Bjorn Helgaas: "This fixes a double kfree in code we merged for v3.20: Remove duplicate kfree in of_pci_get_host_bridge_resources() (Lorenzo Pieralisi)" * tag 'pci-v3.20-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: of/pci: Remove duplicate kfree in of_pci_get_host_bridge_resources()
2015-02-17Merge tag 'drivers-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "These are changes for drivers that are intimately tied to some SoC and for some reason could not get merged through the respective subsystem maintainer tree. This time around, much of this is for at91, with the bulk of it being syscon and udc drivers. Also, there's: - coupled cpuidle support for Samsung Exynos4210 - Renesas 73A0 common-clk work - of/platform changes to tear down DMA mappings on device destruction - a few updates to the TI Keystone knav code" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits) cpuidle: exynos: add coupled cpuidle support for exynos4210 ARM: EXYNOS: apply S5P_CENTRAL_SEQ_OPTION fix only when necessary soc: ti: knav_qmss_queue: change knav_range_setup_acc_irq to static soc: ti: knav_qmss_queue: makefile tweak to build as dynamic module pcmcia: at91_cf: depend on !ARCH_MULTIPLATFORM soc: ti: knav_qmss_queue: export API calls for use by user driver of/platform: teardown DMA mappings on device destruction usb: gadget: at91_udc: Allocate udc instance usb: gadget: at91_udc: Update DT binding documentation usb: gadget: at91_udc: Rework for multi-platform kernel support usb: gadget: at91_udc: Simplify probe and remove functions usb: gadget: at91_udc: Remove non-DT handling code usb: gadget: at91_udc: Document DT clocks and clock-names property usb: gadget: at91_udc: Drop uclk clock usb: gadget: at91_udc: Fix clock names mfd: syscon: Add Atmel SMC binding doc mfd: syscon: Add atmel-smc registers definition mfd: syscon: Add Atmel Matrix bus DT binding documentation mfd: syscon: Add atmel-matrix registers definition clk: shmobile: fix sparse NULL pointer warning ...
2015-02-12Merge tag 'devicetree-for-3.20' of ↵Linus Torvalds6-125/+572
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree changes from Rob Herring: - DT unittests for I2C probing and overlays from Pantelis Antoniou - Remove DT unittest dependency on OF_DYNAMIC from Gaurav Minocha - Add Tegra compatible strings missing for newer parts from Paul Walmsley - Various vendor prefix additions * tag 'devicetree-for-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: Add vendor prefix for OmniVision Technologies of: Use ovti for Omnivision of: Add vendor prefix for Truly Semiconductors Limited of: Add vendor prefix for Himax Technologies Inc. of/fdt: fix sparse warning of: unitest: Add I2C overlay unit tests. Documentation: DT: document compatible string existence requirement Documentation: DT bindings: add nvidia, tegra132-denver compatible string Documentation: DT bindings: add more Tegra chip compatible strings of: EXPORT_SYMBOL_GPL of_property_read_u64_array of: Fix brace position for struct of_device_id definition of/unittest: Remove obsolete code dt-bindings: use isil prefix for Intersil in vendor-prefixes.txt Add AD Holdings Plc. to vendor-prefixes. dt-bindings: Add Silicon Mitus vendor prefix Removes OF_UNITTEST dependency on OF_DYNAMIC config symbol pinctrl: fix up device tree bindings DT: Vendors: Add Everspin doc: add bindings document for altera fpga manager drivers: of: Export of_reserved_mem_device_{init,release}
2015-02-12Merge remote-tracking branch 'grant/devicetree/next' into for-nextRob Herring1-15/+0
2015-02-12of/pci: Remove duplicate kfree in of_pci_get_host_bridge_resources()Lorenzo Pieralisi1-1/+0
Commit d2be00c0fb5a ("of/pci: Free resources on failure in of_pci_get_host_bridge_resources()") fixed the error path so it frees everything on the "resources" list. That list includes the bus_range, so we should not free it again. Remove the superfluous free of bus_range. [bhelgaas: changelog] Fixes: d2be00c0fb5a ("of/pci: Free resources on failure in of_pci_get_host_bridge_resources()") Reported-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Rafael J. Wysocki <rjw@rjwysocki.net>
2015-02-11Merge tag 'pm+acpi-3.20-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "We have a few new features this time, including a new SFI-based cpufreq driver, a new devfreq driver for Tegra Activity Monitor, a new devfreq class for providing its governors with raw utilization data and a new ACPI driver for AMD SoCs. Still, the majority of changes here are reworks of existing code to make it more straightforward or to prepare it for implementing new features on top of it. The primary example is the rework of ACPI resources handling from Jiang Liu, Thomas Gleixner and Lv Zheng with support for IOAPIC hotplug implemented on top of it, but there is quite a number of changes of this kind in the cpufreq core, ACPICA, ACPI EC driver, ACPI processor driver and the generic power domains core code too. The most active developer is Viresh Kumar with his cpufreq changes. Specifics: - Rework of the core ACPI resources parsing code to fix issues in it and make using resource offsets more convenient and consolidation of some resource-handing code in a couple of places that have grown analagous data structures and code to cover the the same gap in the core (Jiang Liu, Thomas Gleixner, Lv Zheng). - ACPI-based IOAPIC hotplug support on top of the resources handling rework (Jiang Liu, Yinghai Lu). - ACPICA update to upstream release 20150204 including an interrupt handling rework that allows drivers to install raw handlers for ACPI GPEs which then become entirely responsible for the given GPE and the ACPICA core code won't touch it (Lv Zheng, David E Box, Octavian Purdila). - ACPI EC driver rework to fix several concurrency issues and other problems related to events handling on top of the ACPICA's new support for raw GPE handlers (Lv Zheng). - New ACPI driver for AMD SoCs analogous to the LPSS (Low-Power Subsystem) driver for Intel chips (Ken Xue). - Two minor fixes of the ACPI LPSS driver (Heikki Krogerus, Jarkko Nikula). - Two new blacklist entries for machines (Samsung 730U3E/740U3E and 510R) where the native backlight interface doesn't work correctly while the ACPI one does (Hans de Goede). - Rework of the ACPI processor driver's handling of idle states to make the code more straightforward and less bloated overall (Rafael J Wysocki). - Assorted minor fixes related to ACPI and SFI (Andreas Ruprecht, Andy Shevchenko, Hanjun Guo, Jan Beulich, Rafael J Wysocki, Yaowei Bai). - PCI core power management modification to avoid resuming (some) runtime-suspended devices during system suspend if they are in the right states already (Rafael J Wysocki). - New SFI-based cpufreq driver for Intel platforms using SFI (Srinidhi Kasagar). - cpufreq core fixes, cleanups and simplifications (Viresh Kumar, Doug Anderson, Wolfram Sang). - SkyLake CPU support and other updates for the intel_pstate driver (Kristen Carlson Accardi, Srinivas Pandruvada). - cpufreq-dt driver cleanup (Markus Elfring). - Init fix for the ARM big.LITTLE cpuidle driver (Sudeep Holla). - Generic power domains core code fixes and cleanups (Ulf Hansson). - Operating Performance Points (OPP) core code cleanups and kernel documentation update (Nishanth Menon). - New dabugfs interface to make the list of PM QoS constraints available to user space (Nishanth Menon). - New devfreq driver for Tegra Activity Monitor (Tomeu Vizoso). - New devfreq class (devfreq_event) to provide raw utilization data to devfreq governors (Chanwoo Choi). - Assorted minor fixes and cleanups related to power management (Andreas Ruprecht, Krzysztof Kozlowski, Rickard Strandqvist, Pavel Machek, Todd E Brandt, Wonhong Kwon). - turbostat updates (Len Brown) and cpupower Makefile improvement (Sriram Raghunathan)" * tag 'pm+acpi-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (151 commits) tools/power turbostat: relax dependency on APERF_MSR tools/power turbostat: relax dependency on invariant TSC Merge branch 'pci/host-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into acpi-resources tools/power turbostat: decode MSR_*_PERF_LIMIT_REASONS tools/power turbostat: relax dependency on root permission ACPI / video: Add disable_native_backlight quirk for Samsung 510R ACPI / PM: Remove unneeded nested #ifdef USB / PM: Remove unneeded #ifdef and associated dead code intel_pstate: provide option to only use intel_pstate with HWP ACPI / EC: Add GPE reference counting debugging messages ACPI / EC: Add query flushing support ACPI / EC: Refine command storm prevention support ACPI / EC: Add command flushing support. ACPI / EC: Introduce STARTED/STOPPED flags to replace BLOCKED flag ACPI: add AMD ACPI2Platform device support for x86 system ACPI / table: remove duplicate NULL check for the handler of acpi_table_parse() ACPI / EC: Update revision due to raw handler mode. ACPI / EC: Reduce ec_poll() by referencing the last register access timestamp. ACPI / EC: Fix several GPE handling issues by deploying ACPI_GPE_DISPATCH_RAW_HANDLER mode. ACPICA: Events: Enable APIs to allow interrupt/polling adaptive request based GPE handling model ...
2015-02-11Merge tag 'pci-v3.20-changes' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Enumeration - Move domain assignment from arm64 to generic code (Lorenzo Pieralisi) - ARM: Remove artificial dependency on pci_sys_data domain (Lorenzo Pieralisi) - ARM: Move to generic PCI domains (Lorenzo Pieralisi) - Generate uppercase hex for modalias var in uevent (Ricardo Ribalda Delgado) - Add and use generic config accessors on ARM, PowerPC (Rob Herring) Resource management - Free resources on failure in of_pci_get_host_bridge_resources() (Lorenzo Pieralisi) - Fix infinite loop with ROM image of size 0 (Michel Dänzer) PCI device hotplug - Handle surprise add even if surprise removal isn't supported (Bjorn Helgaas) Virtualization - Mark AMD/ATI VGA devices that don't reset on D3hot->D0 transition (Alex Williamson) - Add DMA alias quirk for Adaptec 3405 (Alex Williamson) - Add Wellsburg (X99) to Intel PCH root port ACS quirk (Alex Williamson) - Add ACS quirk for Emulex NICs (Vasundhara Volam) MSI - Fail MSI-X mappings if there's no space assigned to MSI-X BAR (Yijing Wang) Freescale Layerscape host bridge driver - Fix platform_no_drv_owner.cocci warnings (Julia Lawall) NVIDIA Tegra host bridge driver - Remove unnecessary tegra_pcie_fixup_bridge() (Lucas Stach) Renesas R-Car host bridge driver - Fix error handling of irq_of_parse_and_map() (Dmitry Torokhov) TI Keystone host bridge driver - Fix error handling of irq_of_parse_and_map() (Dmitry Torokhov) - Fix misspelling of current function in debug output (Julia Lawall) Xilinx AXI host bridge driver - Fix harmless format string warning (Arnd Bergmann) Miscellaneous - Use standard parsing functions for ASPM sysfs setters (Chris J Arges) - Add pci_device_to_OF_node() stub for !CONFIG_OF (Kevin Hao) - Delete unnecessary NULL pointer checks (Markus Elfring) - Add and use defines for PCIe Max_Read_Request_Size (Rafał Miłecki) - Include clk.h instead of clk-private.h (Stephen Boyd)" * tag 'pci-v3.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits) PCI: Add pci_device_to_OF_node() stub for !CONFIG_OF PCI: xilinx: Convert to use generic config accessors PCI: xgene: Convert to use generic config accessors PCI: tegra: Convert to use generic config accessors PCI: rcar: Convert to use generic config accessors PCI: generic: Convert to use generic config accessors powerpc/powermac: Convert PCI to use generic config accessors powerpc/fsl_pci: Convert PCI to use generic config accessors ARM: ks8695: Convert PCI to use generic config accessors ARM: sa1100: Convert PCI to use generic config accessors ARM: integrator: Convert PCI to use generic config accessors PCI: versatile: Add DT-based ARM Versatile PB PCIe host driver ARM: dts: versatile: add PCI controller binding of/pci: Free resources on failure in of_pci_get_host_bridge_resources() PCI: versatile: Add DT docs for ARM Versatile PB PCIe driver PCI: Fail MSI-X mappings if there's no space assigned to MSI-X BAR r8169: use PCI define for Max_Read_Request_Size [SCSI] esas2r: use PCI define for Max_Read_Request_Size tile: use PCI define for Max_Read_Request_Size rapidio/tsi721: use PCI define for Max_Read_Request_Size ...
2015-02-10Merge branch 'pci/host-generic' of ↵Rafael J. Wysocki1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into acpi-resources modified: drivers/of/of_pci.c This fixes a build failure after merging the 'acpi-resources' branch with the PCI tree caused by bad interactions between that branch and the only commit in 'pci/host-generic'. Also that commit contains a bug which can be fixed by removing one line of code, so do that too. Link: http://marc.info/?l=linux-kernel&m=142344882101429&w=2 Link: http://marc.info/?l=linux-next&m=142346304003932&w=2 Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-04of/fdt: fix sparse warningLad, Prabhakar1-1/+1
this patch fixes following sparse warning: fdt.c:765:12: warning: symbol 'early_init_dt_scan_chosen_serial' was not declared. Should it be static? Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2015-02-04of: unitest: Add I2C overlay unit tests.Pantelis Antoniou2-50/+556
Introduce I2C device tree overlay tests. Tests insertion and removal of i2c adapters, i2c devices, and muxes. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Rob Herring <robh@kernel.org>
2015-02-04Merge tag 'v3.19-rc6' into HEADRob Herring4-11/+103
Linux 3.19-rc6
2015-02-04of: EXPORT_SYMBOL_GPL of_property_read_u64_arraySakari Ailus1-0/+1
Make of_property_read_u64_array() available for modules as well. This was missing from the patch which originally added the function. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Rob Herring <robh@kernel.org>
2015-01-29of/pci: Free resources on failure in of_pci_get_host_bridge_resources()Lorenzo Pieralisi1-0/+4
In the function of_pci_get_host_bridge_resources() if the parsing of ranges fails, previously allocated resources inclusive of bus_range are not freed and are not expected to be freed by the function caller on error return. This patch fixes the issues by adding code that properly frees resources and bus_range before exiting the function with an error return value. Fixes: cbe4097f8ae6 ("of/pci: Add support for parsing PCI host bridge resources from DT") Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Rob Herring <robh+dt@kernel.org>
2015-01-23of/unittest: Overlays with sub-devices testsPantelis Antoniou2-0/+94
Introduce selftests for overlays using sub-devices present in children nodes. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2015-01-22of/unittest: Remove obsolete codeGrant Likely1-15/+0
Commit 3ce04b4a9, "Removes OF_UNITTEST dependency on OF_DYNAMIC config symbol" removes a bunch of code, but missed a few minor bits. Clean it up by removing the node removal cache and flag. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Gaurav Minocha <gaurav.minocha.os@gmail.com> Cc: Rob Herring <robh@kernel.org>
2015-01-22of/platform: Handle of_populate drivers in notifierPantelis Antoniou1-0/+9
When using overlays with drivers calling of_populate the notifier will try to create the device twice. Using the populated bit before proceeding protects against this. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2015-01-22of/overlay: Do not generate duplicate nodesPantelis Antoniou1-11/+0
During the course of the rewrites a bug sneaked in when dealing with children nodes of overlays, which ends up duplicating sub nodes. Simply remove the duplicate traversal of child nodes to fix. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2015-01-22of/platform: teardown DMA mappings on device destructionWill Deacon1-0/+1
Now that we can create and attach to IOMMU domains via of_dma_configure, make sure we give the architecture a chance to tear them down when a platform or amba device is destroyed. Acked-by: Rob Herring <robh@kernel.org> Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-13Removes OF_UNITTEST dependency on OF_DYNAMIC config symbolGaurav Minocha2-59/+12
This patch intends to remove the unittests dependency on the functions defined in dynamic.c. So, rather than calling of_attach_node defined in dynamic.c, minimal functionality required to attach a new node is re-defined in unittest.c. Also, now after executing the tests the test data is not removed from the device tree so there is no need to call of_detach_node. Tested with and without OF_DYNAMIC enabled on ppc, arm and x86 Signed-off-by: Gaurav Minocha <gaurav.minocha.os@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2015-01-13drivers: of: Export of_reserved_mem_device_{init,release}George G. Davis1-0/+2
Export of_reserved_mem_device_{init,release} so that modules can initialize and release their assigned per-device cma_area. Signed-off-by: George G. Davis <george_davis@mentor.com> [robh: s/EXPORT_SYMBOL/EXPORT_SYMBOL_GPL/] Signed-off-by: Rob Herring <robh@kernel.org>
2015-01-13dma-mapping: fix debug print to display correct dma_pfn_offsetMurali Karicheri1-1/+1
fix the dev_dbg to display the offset which is the calculated dma_pfn_offset value and set later in the code. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Rob Herring <robh@kernel.org>
2014-12-17Merge tag 'iommu-config-for-linus' of ↵Linus Torvalds1-24/+26
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC/iommu configuration update from Arnd Bergmann: "The iomm-config branch contains work from Will Deacon, quoting his description: This series adds automatic IOMMU and DMA-mapping configuration for OF-based DMA masters described using the generic IOMMU devicetree bindings. Although there is plenty of future work around splitting up iommu_ops, adding default IOMMU domains and sorting out automatic IOMMU group creation for the platform_bus, this is already useful enough for people to port over their IOMMU drivers and start using the new probing infrastructure (indeed, Marek has patches queued for the Exynos IOMMU). The branch touches core ARM and IOMMU driver files, and the respective maintainers (Russell King and Joerg Roedel) agreed to have the contents merged through the arm-soc tree. The final version was ready just before the merge window, so we ended up delaying it a bit longer than the rest, but we don't expect to see regressions because this is just additional infrastructure that will get used in drivers starting in 3.20 but is unused so far" * tag 'iommu-config-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: iommu: store DT-probed IOMMU data privately arm: dma-mapping: plumb our iommu mapping ops into arch_setup_dma_ops arm: call iommu_init before of_platform_populate dma-mapping: detect and configure IOMMU in of_dma_configure iommu: fix initialization without 'add_device' callback iommu: provide helper function to configure an IOMMU for an of master iommu: add new iommu_ops callback for adding an OF device dma-mapping: replace set_arch_dma_coherent_ops with arch_setup_dma_ops iommu: provide early initialisation hook for IOMMU drivers
2014-12-14Merge branch 'i2c/for-3.19' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "For 3.19, the I2C subsystem has to offer special candy this time. Right in time for Christmas :) - I2C slave framework: finally, a generic mechanism for Linux being an I2C slave (if the bus driver supports that). Docs are still missing but will come later this cycle, the code is good enough to go. - I2C muxes represent their topology in sysfs much more detailed. This will help users to navigate around much easier. - irq population of i2c clients is now done at probe time, not device creation time, to have better support for deferred probing. - new drivers for Imagination SCB, Amlogic Meson - DMA support added for Freescale IMX, Renesas SHMobile - slightly bigger driver updates to OMAP, i801, AT91, and rk3x (mostly quirk handling, timing updates, and using better kernel interfaces) - eeprom driver can now write with byte-access (very slow, but OK to have) - and the bunch of smaller fixes, cleanups, ID updates..." * 'i2c/for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (56 commits) i2c: sh_mobile: remove unneeded DMA mask i2c: rcar: add slave support i2c: slave-eeprom: add eeprom simulator driver i2c: core changes for slave support MAINTAINERS: add I2C dt bindings also to I2C realm i2c: designware: Fix falling time bindings doc i2c: davinci: switch to use platform_get_irq Documentation: i2c: Use PM ops instead of legacy suspend/resume i2c: sh_mobile: optimize irq entry i2c: pxa: add support for SCCB devices omap: i2c: don't check bus state IP rev3.3 and earlier i2c: s3c2410: Handle i2c sys_cfg register in i2c driver i2c: rk3x: add Kconfig dependency on COMMON_CLK i2c: omap: add notes related to i2c multimaster mode i2c: omap: don't reset controller if Arbitration Lost detected i2c: omap: implement workaround for handling invalid BB-bit values i2c: omap: cleanup register definitions i2c: rk3x: handle dynamic clock rate changes correctly i2c: at91: enable probe deferring on dma channel request i2c: at91: remove legacy DMA support ...
2014-12-12Merge tag 'devicetree-for-linus' of ↵Linus Torvalds19-307/+1903
git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux Pull devicetree changes from Grant Likely: "Lots of activity in the devicetree code for v3.18. Most of it is related to getting all of the overlay support code in place, but there are other important things in there. Highlights: - OF_RECONFIG notifiers for SPI, I2C and Platform devices. Those subsystems can now respond to live changes to the device tree. - CONFIG_OF_OVERLAY method for applying live changes to the device tree - Removal of the of_allnodes list. This used to be used to iterate over all the nodes in the device tree, but it is unnecessary because the same thing can be done by iterating over the list of child pointers. Getting rid of of_allnodes saves some memory and avoids the possibility of of_allnodes being sorted differently from the child lists. - Support for retrieving original DTB blob via sysfs. Needed by kexec. - More unittests - Documentation and minor bug fixes" * tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: (42 commits) of: Delete unnecessary check before calling "of_node_put()" of: Drop ->next pointer from struct device_node spi: Check for spi_of_notifier when CONFIG_OF_DYNAMIC=y of: support passing console options with stdout-path of: add optional options parameter to of_find_node_by_path() of: Add bindings for chosen node, stdout-path of: Remove unneeded and incorrect MODULE_DEVICE_TABLE ARM: dt: fix up PL011 device tree bindings of: base, fix of_property_read_string_helper kernel-doc of: remove select of non-existant OF_DEVICE config symbol spi/of: Add OF notifier handler spi/of: Create new device registration method and accessors i2c/of: Add OF_RECONFIG notifier handler i2c/of: Factor out Devicetree registration code of/overlay: Add overlay unittests of/overlay: Introduce DT overlay support of/reconfig: Add OF_DYNAMIC notifier for platform_bus_type of/reconfig: Always use the same structure for notifiers of/reconfig: Add debug output for OF_RECONFIG notifiers of/reconfig: Add empty stubs for the of_reconfig methods ...
2014-12-11Merge tag 'pm+acpi-3.19-rc1' of ↵Linus Torvalds1-0/+33
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "This time we have some more new material than we used to have during the last couple of development cycles. The most important part of it to me is the introduction of a unified interface for accessing device properties provided by platform firmware. It works with Device Trees and ACPI in a uniform way and drivers using it need not worry about where the properties come from as long as the platform firmware (either DT or ACPI) makes them available. It covers both devices and "bare" device node objects without struct device representation as that turns out to be necessary in some cases. This has been in the works for quite a few months (and development cycles) and has been approved by all of the relevant maintainers. On top of that, some drivers are switched over to the new interface (at25, leds-gpio, gpio_keys_polled) and some additional changes are made to the core GPIO subsystem to allow device drivers to manipulate GPIOs in the "canonical" way on platforms that provide GPIO information in their ACPI tables, but don't assign names to GPIO lines (in which case the driver needs to do that on the basis of what it knows about the device in question). That also has been approved by the GPIO core maintainers and the rfkill driver is now going to use it. Second is support for hardware P-states in the intel_pstate driver. It uses CPUID to detect whether or not the feature is supported by the processor in which case it will be enabled by default. However, it can be disabled entirely from the kernel command line if necessary. Next is support for a platform firmware interface based on ACPI operation regions used by the PMIC (Power Management Integrated Circuit) chips on the Intel Baytrail-T and Baytrail-T-CR platforms. That interface is used for manipulating power resources and for thermal management: sensor temperature reporting, trip point setting and so on. Also the ACPI core is now going to support the _DEP configuration information in a limited way. Basically, _DEP it supposed to reflect off-the-hierarchy dependencies between devices which may be very indirect, like when AML for one device accesses locations in an operation region handled by another device's driver (usually, the device depended on this way is a serial bus or GPIO controller). The support added this time is sufficient to make the ACPI battery driver work on Asus T100A, but it is general enough to be able to cover some other use cases in the future. Finally, we have a new cpufreq driver for the Loongson1B processor. In addition to the above, there are fixes and cleanups all over the place as usual and a traditional ACPICA update to a recent upstream release. As far as the fixes go, the ACPI LPSS (Low-power Subsystem) driver for Intel platforms should be able to handle power management of the DMA engine correctly, the cpufreq-dt driver should interact with the thermal subsystem in a better way and the ACPI backlight driver should handle some more corner cases, among other things. On top of the ACPICA update there are fixes for race conditions in the ACPICA's interrupt handling code which might lead to some random and strange looking failures on some systems. In the cleanups department the most visible part is the series of commits targeted at getting rid of the CONFIG_PM_RUNTIME configuration option. That was triggered by a discussion regarding the generic power domains code during which we realized that trying to support certain combinations of PM config options was painful and not really worth it, because nobody would use them in production anyway. For this reason, we decided to make CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and that lead to the conclusion that the latter became redundant and CONFIG_PM could be used instead of it. The material here makes that replacement in a major part of the tree, but there will be at least one more batch of that in the second part of the merge window. Specifics: - Support for retrieving device properties information from ACPI _DSD device configuration objects and a unified device properties interface for device drivers (and subsystems) on top of that. As stated above, this works with Device Trees and ACPI and allows device drivers to be written in a platform firmware (DT or ACPI) agnostic way. The at25, leds-gpio and gpio_keys_polled drivers are now going to use this new interface and the GPIO subsystem is additionally modified to allow device drivers to assign names to GPIO resources returned by ACPI _CRS objects (in case _DSD is not present or does not provide the expected data). The changes in this set are mostly from Mika Westerberg, Rafael J Wysocki, Aaron Lu, and Darren Hart with some fixes from others (Fabio Estevam, Geert Uytterhoeven). - Support for Hardware Managed Performance States (HWP) as described in Volume 3, section 14.4, of the Intel SDM in the intel_pstate driver. CPUID is used to detect whether or not the feature is supported by the processor. If supported, it will be enabled automatically unless the intel_pstate=no_hwp switch is present in the kernel command line. From Dirk Brandewie. - New Intel Broadwell-H ID for intel_pstate (Dirk Brandewie). - Support for firmware interface based on ACPI operation regions used by the PMIC chips on the Intel Baytrail-T and Baytrail-T-CR platforms for power resource control and thermal management (Aaron Lu). - Limited support for retrieving off-the-hierarchy dependencies between devices from ACPI _DEP device configuration objects and deferred probing support for the ACPI battery driver based on the _DEP information to make that driver work on Asus T100A (Lan Tianyu). - New cpufreq driver for the Loongson1B processor (Kelvin Cheung). - ACPICA update to upstream revision 20141107 which only affects tools (Bob Moore). - Fixes for race conditions in the ACPICA's interrupt handling code and in the ACPI code related to system suspend and resume (Lv Zheng and Rafael J Wysocki). - ACPI core fix for an RCU-related issue in the ioremap() regions management code that slowed down significantly after CPUs had been allowed to enter idle states even if they'd had RCU callbakcs queued and triggered some problems in certain proprietary graphics driver (and elsewhere). The fix replaces synchronize_rcu() in that code with synchronize_rcu_expedited() which makes the issue go away. From Konstantin Khlebnikov. - ACPI LPSS (Low-Power Subsystem) driver fix to handle power management of the DMA engine included into the LPSS correctly. The problem is that the DMA engine doesn't have ACPI PM support of its own and it simply is turned off when the last LPSS device having ACPI PM support goes into D3cold. To work around that, the PM domain used by the ACPI LPSS driver is redesigned so at least one device with ACPI PM support will be on as long as the DMA engine is in use. From Andy Shevchenko. - ACPI backlight driver fix to avoid using it on "Win8-compatible" systems where it doesn't work and where it was used by default by mistake (Aaron Lu). - Assorted minor ACPI core fixes and cleanups from Tomasz Nowicki, Sudeep Holla, Huang Rui, Hanjun Guo, Fabian Frederick, and Ashwin Chaugule (mostly related to the upcoming ARM64 support). - Intel RAPL (Running Average Power Limit) power capping driver fixes and improvements including new processor IDs (Jacob Pan). - Generic power domains modification to power up domains after attaching devices to them to meet the expectations of device drivers and bus types assuming devices to be accessible at probe time (Ulf Hansson). - Preliminary support for controlling device clocks from the generic power domains core code and modifications of the ARM/shmobile platform to use that feature (Ulf Hansson). - Assorted minor fixes and cleanups of the generic power domains core code (Ulf Hansson, Geert Uytterhoeven). - Assorted minor fixes and cleanups of the device clocks control code in the PM core (Geert Uytterhoeven, Grygorii Strashko). - Consolidation of device power management Kconfig options by making CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and removing the latter which is now redundant (Rafael J Wysocki and Kevin Hilman). That is the first batch of the changes needed for this purpose. - Core device runtime power management support code cleanup related to the execution of callbacks (Andrzej Hajda). - cpuidle ARM support improvements (Lorenzo Pieralisi). - cpuidle cleanup related to the CPUIDLE_FLAG_TIME_VALID flag and a new MAINTAINERS entry for ARM Exynos cpuidle (Daniel Lezcano and Bartlomiej Zolnierkiewicz). - New cpufreq driver callback (->ready) to be executed when the cpufreq core is ready to use a given policy object and cpufreq-dt driver modification to use that callback for cooling device registration (Viresh Kumar). - cpufreq core fixes and cleanups (Viresh Kumar, Vince Hsu, James Geboski, Tomeu Vizoso). - Assorted fixes and cleanups in the cpufreq-pcc, intel_pstate, cpufreq-dt, pxa2xx cpufreq drivers (Lenny Szubowicz, Ethan Zhao, Stefan Wahren, Petr Cvek). - OPP (Operating Performance Points) framework modification to allow OPPs to be removed too and update of a few cpufreq drivers (cpufreq-dt, exynos5440, imx6q, cpufreq) to remove OPPs (added during initialization) on driver removal (Viresh Kumar). - Hibernation core fixes and cleanups (Tina Ruchandani and Markus Elfring). - PM Kconfig fix related to CPU power management (Pankaj Dubey). - cpupower tool fix (Prarit Bhargava)" * tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (120 commits) i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tools: cpupower: fix return checks for sysfs_get_idlestate_count() drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM leds: leds-gpio: Fix multiple instances registration without 'label' property iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hwrandom / exynos / PM: Use CONFIG_PM in #ifdef block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM USB / PM: Drop CONFIG_PM_RUNTIME from the USB core PM: Merge the SET*_RUNTIME_PM_OPS() macros ...
2014-12-10Merge branch 'irq-irqdomain-for-linus' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq domain updates from Thomas Gleixner: "The real interesting irq updates: - Support for hierarchical irq domains: For complex interrupt routing scenarios where more than one interrupt related chip is involved we had no proper representation in the generic interrupt infrastructure so far. That made people implement rather ugly constructs in their nested irq chip implementations. The main offenders are x86 and arm/gic. To distangle that mess we have now hierarchical irqdomains which seperate the various interrupt chips and connect them via the hierarchical domains. That keeps the domain specific details internal to the particular hierarchy level and removes the criss/cross referencing of chip internals. The resulting hierarchy for a complex x86 system will look like this: vector mapped: 74 msi-0 mapped: 2 dmar-ir-1 mapped: 69 ioapic-1 mapped: 4 ioapic-0 mapped: 20 pci-msi-2 mapped: 45 dmar-ir-0 mapped: 3 ioapic-2 mapped: 1 pci-msi-1 mapped: 2 htirq mapped: 0 Neither ioapic nor pci-msi know about the dmar interrupt remapping between themself and the vector domain. If interrupt remapping is disabled ioapic and pci-msi become direct childs of the vector domain. In hindsight we should have done that years ago, but in hindsight we always know better :) - Support for generic MSI interrupt domain handling We have more and more non PCI related MSI interrupts, so providing a generic infrastructure for this is better than having all affected architectures implementing their own private hacks. - Support for PCI-MSI interrupt domain handling, based on the generic MSI support. This part carries the pci/msi branch from Bjorn Helgaas pci tree to avoid a massive conflict. The PCI/MSI parts are acked by Bjorn. I have two more branches on top of this. The full conversion of x86 to hierarchical domains and a partial conversion of arm/gic" * 'irq-irqdomain-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) genirq: Move irq_chip_write_msi_msg() helper to core PCI/MSI: Allow an msi_controller to be associated to an irq domain PCI/MSI: Provide mechanism to alloc/free MSI/MSIX interrupt from irqdomain PCI/MSI: Enhance core to support hierarchy irqdomain PCI/MSI: Move cached entry functions to irq core genirq: Provide default callbacks for msi_domain_ops genirq: Introduce msi_domain_alloc/free_irqs() asm-generic: Add msi.h genirq: Add generic msi irq domain support genirq: Introduce callback irq_chip.irq_write_msi_msg genirq: Work around __irq_set_handler vs stacked domains ordering issues irqdomain: Introduce helper function irq_domain_add_hierarchy() irqdomain: Implement a method to automatically call parent domains alloc/free genirq: Introduce helper irq_domain_set_info() to reduce duplicated code genirq: Split out flow handler typedefs into seperate header file genirq: Add IRQ_SET_MASK_OK_DONE to support stacked irqchip genirq: Introduce irq_chip.irq_compose_msi_msg() to support stacked irqchip genirq: Add more helper functions to support stacked irq_chip genirq: Introduce helper functions to support stacked irq_chip irqdomain: Do irq_find_mapping and set_type for hierarchy irqdomain in case OF ...
2014-12-08Merge branch 'device-properties'Rafael J. Wysocki1-0/+33
* device-properties: leds: leds-gpio: Fix multiple instances registration without 'label' property leds: leds-gpio: Fix legacy GPIO number case ACPI / property: Drop size_prop from acpi_dev_get_property_reference() leds: leds-gpio: Convert gpio_blink_set() to use GPIO descriptors ACPI / GPIO: Document ACPI GPIO mappings API net: rfkill: gpio: Add default GPIO driver mappings for ACPI ACPI / GPIO: Driver GPIO mappings for ACPI GPIOs input: gpio_keys_polled: Make use of device property API leds: leds-gpio: Make use of device property API gpio: Support for unified device properties interface Driver core: Unified interface for firmware node properties input: gpio_keys_polled: Add support for GPIO descriptors leds: leds-gpio: Add support for GPIO descriptors gpio: sch: Consolidate core and resume banks gpio / ACPI: Add support for _DSD device properties misc: at25: Make use of device property API ACPI: Allow drivers to match using Device Tree compatible property Driver core: Unified device properties interface for platform firmware ACPI: Add support for device specific properties
2014-12-04of: Delete unnecessary check before calling "of_node_put()"Markus Elfring1-2/+1
The of_node_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-12-04of: Drop ->next pointer from struct device_nodeGrant Likely1-6/+18
The ->next pointer in struct device_node is a hanger-on from when it was used to iterate over the whole tree by a particular device_type property value. Those days are long over, but the fdt unflattening code still uses it to put nodes in the unflattened tree into the same order as node in the flat tree. By reworking the unflattening code to reverse the list after unflattening all the children of a node, the pointer can be dropped which gives a small amount of memory savings. Signed-off-by: Grant Likely <grant.likely@linaro.org> Acked-by: Frank Rowand <frank.rowand@sonymobile.com> Cc: Gaurav Minocha <gaurav.minocha.os@gmail.com>
2014-12-04of: support passing console options with stdout-pathLeif Lindholm1-2/+4
Support specifying console options (like with console=ttyXN,<options>) by appending them to the stdout-path property after a separating ':'. Example: stdout-path = "uart0:115200"; Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org> [grant.likely: minor rework to shorten the diffstat] Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-12-04of: add optional options parameter to of_find_node_by_path()Leif Lindholm2-4/+46
Update of_find_node_by_path(): 1) Rename function to of_find_node_opts_by_path(), adding an optional pointer argument. Provide a static inline wrapper version of of_find_node_by_path() which calls the new function with NULL as the optional argument. 2) Ignore any part of the path beyond and including the ':' separator. 3) Set the new provided pointer argument to the beginning of the string following the ':' separator. 4: Add tests. Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-12-01dma-mapping: detect and configure IOMMU in of_dma_configureWill Deacon1-7/+14
This patch extends of_dma_configure so that it sets up the IOMMU for a device, as well as the coherent/non-coherent DMA mapping ops. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-12-01dma-mapping: replace set_arch_dma_coherent_ops with arch_setup_dma_opsWill Deacon1-18/+13
set_arch_dma_coherent_ops is called from of_dma_configure in order to swizzle the architectural dma-mapping functions over to a cache-coherent implementation. This is currently implemented only for ARM. In anticipation of re-using this mechanism for IOMMU-backed dma-mapping ops too, this patch replaces the function with a broader arch_setup_dma_ops callback which will be extended in future. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-11-28of: Remove unneeded and incorrect MODULE_DEVICE_TABLEGrant Likely1-1/+0
The unittest code has a MODULE_DEVICE_TABLE that isn't needed by any of the unittests, and isn't even correct. Remove it. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
2014-11-27of: base, fix of_property_read_string_helper kernel-docJiri Slaby1-1/+1
It referenced of_property_read_string_util whereas the function name is of_property_read_string_helper. Introduced in a87fa1d81a9fb5e9adca9820e16008c40ad09f33 (of: Fix overflow bug in string property parsing functions). Found out when reviewing the stable 3.12 queue. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-11-26of: remove select of non-existant OF_DEVICE config symbolGrant Likely1-1/+0
The OF_OVERLAY option selects OF_DEVICE, but OF_DEVICE was removed in commit ba166e900b, "of: remove CONFIG_OF_DEVICE". Remove the unnecessary select. Signed-off-by: Grant Likely <grant.likely@linaro.org> Reported-by: Paul Bolle <pebolle@tiscali.nl> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
2014-11-26of/fdt: memblock_reserve /memreserve/ regions in the case of partial overlapIan Campbell1-2/+0
memblock_is_region_reserved() returns true in the case of a partial overlap, meaning that the current code fails to reserve the non-overlapping portion. This call was introduced as part of d1552ce449eb "of/fdt: move memreserve and dtb memory reservations into core" which went into v3.16. I observed this causing a Midway system with a buggy fdt (the header declares itself to be larger than it really is) failing to boot because the over-inflated size of the fdt was causing it to seem to run into the swapper_pg_dir region, meaning the DT wasn't reserved. The symptoms were failing to find an disks or network and failing to boot. However given the ambiguity of whether things like the initrd are covered by /memreserve/ and similar I think it is best to also register the region rather than just ignoring it. Since memblock_reserve() handles overlaps just fine lets just warn and carry on. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: stable@vger.kernel.org # v3.16+
2014-11-25of/overlay: Add overlay unittestsPantelis Antoniou3-0/+677
Add unittests for OF overlays. It tests overlay device addition/removal and whether the apply revert sequence is correct. Changes since V1: * Added local fixups entries. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-11-25of/overlay: Introduce DT overlay supportPantelis Antoniou3-0/+570
Overlays are a method to dynamically modify part of the kernel's device tree with dynamically loaded data. Add the core functionality to parse, apply and remove an overlay changeset. The core functionality takes care of managing the overlay data format and performing the add and remove. Drivers are expected to use the overlay functionality to support custom expansion busses commonly found on consumer development boards like the BeagleBone or Raspberry Pi. The overlay code uses CONFIG_OF_DYNAMIC changesets to perform the low level work of modifying the devicetree. Documentation about internal and APIs is provided in Documentation/devicetree/overlay-notes.txt v2: - Switch from __of_node_alloc() to __of_node_dup() - Documentation fixups - Remove 2-pass processing of properties - Remove separate ov_lock; just use the DT mutex. v1: - Drop delete capability using '-' prefix. The '-' prefixed names are valid properties and nodes and there is no need for it just yet. - Do not update special properties - name & phandle ones. - Change order of node attachment, so that the special property update works. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-11-25of/reconfig: Add OF_DYNAMIC notifier for platform_bus_typePantelis Antoniou1-0/+55
Add OF notifier handler needed for creating/destroying platform devices according to dynamic runtime changes in the DT live tree. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-11-25of/reconfig: Always use the same structure for notifiersGrant Likely1-20/+21
The OF_RECONFIG notifier callback uses a different structure depending on whether it is a node change or a property change. This is silly, and not very safe. Rework the code to use the same data structure regardless of the type of notifier. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: <linuxppc-dev@lists.ozlabs.org>
2014-11-25of/reconfig: Add debug output for OF_RECONFIG notifiersGrant Likely1-16/+32
Add some additional debug output to cover OF_RECONFIG notifier activity. At the same time, refactor the changeset debug output to use the same strings as the notifier debug output. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-11-25of/reconfig: Add of_reconfig_get_state_change() of notifier helper.Pantelis Antoniou1-0/+96
Introduce of_reconfig_get_state_change() which allows an of notifier to query about device state changes. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-11-25of/resolver: Switch to new local fixups format.Pantelis Antoniou2-50/+139
The original resolver format is way too cryptic, switch to using a tree based format that gets rid of repetitions, is more compact and readable. At the same time, update the selftests to using the new local fixups format. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> [grant.likely: Squashed in testcase changes and merged similar functions] Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-11-25of: Refactor __of_node_alloc() into __of_node_dup()Grant Likely3-16/+40
Add a node argument to __of_node_alloc() and rename it to __of_node_dup() so that it can also be used to duplicate a node with its properties. This is important for the overlay code so that it can create new nodes without using separate changeset items for every single property. At the same time rework the overlay code to use the new function and drop the extra changeset items. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-11-25of: Use vargs in __of_node_allocGrant Likely3-12/+12
The overlay code needs to construct a new full_name from the parent name and the node name, but the current method has to allocate and then free an temporary string which is wasteful. Fix this problem by using vargs to pass in a format and arguments into __of_node_alloc(). At the same time remove the allocflags argument to __of_node_alloc(). The only users all use GFP_KERNEL, so there is no need to provide it as an option. If there is ever a need later it can be added back. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-11-24Merge tag 'v3.18-rc6' into devicetree/nextGrant Likely4-8/+26
v3.18-rc6 contains an important DT bug fix, c1a2086e2d, "of/selftest: Fix off-by-one error in removal path" which affects testing of the overlay patch series. Merge it into the devicetree/next staging branch so that the overlay patches are applied on top of a known working tree. Linux 3.18-rc6 Conflicts: drivers/of/address.c
2014-11-20of/selftest: Fix testing when /aliases is missingGrant Likely1-1/+7
The /aliases node isn't always present in the device tree, but the unittest code assumes that /aliases is there. Add a check when inserting the testcase data to see if of_aliases needs to be updated, and undo the settings when the nodes are removed. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Gaurav Minocha <gaurav.minocha.os@gmail.com> Cc: <stable@vger.kernel.org>
2014-11-20of: Properly set the OF_POPULATED_BUS flag on root nodeGrant Likely1-1/+5
of_platform_populate() takes a subset of the device tree and turns it into a set of platform_devices. At the same time it sets the OF_POPULATED_BUS flag in each bus nodes so that of_platform_depopulate() can undo the operation at a later time. However, it doesn't set the flag on the root of the population tree which means that dynamic modifications of the device tree at runtime will not create/destroy devices correctly. Fix of_platform_populate() to set the OF_POPULATED_BUS flag on the node it is called with. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Pawel Moll <pawel.moll@arm.com>
2014-11-19of/selftest: Fix off-by-one error in removal pathGrant Likely1-2/+1
The removal path for selftest data has an off by one error that causes the code to dereference beyond the end of the nodes[] array on the first pass through. The old code only worked by chance on a lot of platforms, but the bug was recently exposed on aarch64. The fix is simple. Decrement the node count before dereferencing, not after. Reported-by: Kevin Hilman <khilman@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Gaurav Minocha <gaurav.minocha.os@gmail.com> Cc: <stable@vger.kernel.org> # v3.17+