summaryrefslogtreecommitdiff
path: root/drivers/opp
AgeCommit message (Collapse)AuthorFilesLines
2022-03-03OPP: Add support of "opp-microwatt" for EM registrationLukasz Luba1-1/+60
The Energy Model (EM) can be created based on DT entry: 'dynamic-power-coefficient'. It's a 'simple' EM which is limited to the dynamic power. It has to fit into the math formula which requires also information about voltage. Some of the platforms don't expose voltage information, thus it's not possible to use EM registration using DT. This patch aims to fix it. It introduces new implementation of the EM registration callback. The new mechanism relies on the new OPP feature allowing to get power (which is coming from "opp-microwatt" DT property) expressed in micro-Watts. The patch also opens new opportunity to better support platforms, which have a decent static power. It allows to register the EM based on real power measurements which models total power (static + dynamic), so better reflects real HW. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-03-03OPP: Add "opp-microwatt" supporting codeLukasz Luba3-2/+73
Add new property to the OPP: power value. The OPP entry in the DT can have "opp-microwatt". Add the needed code to handle this new property in the existing infrastructure. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-02-11opp: Expose of-node's name in debugfsViresh Kumar2-0/+6
It is difficult to find which OPPs are active at the moment, specially if there are multiple OPPs with same frequency available in the device tree (controlled by supported hardware feature). Expose name of the DT node to find out the exact OPP. While at it, also expose level field. Reported-by: Leo Yan <leo.yan@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-10-08opp: Fix return in _opp_add_static_v2()YueHaibing1-1/+1
Fix sparse warning: drivers/opp/of.c:924 _opp_add_static_v2() warn: passing zero to 'ERR_PTR' For duplicate OPPs 'ret' be set to zero. Fixes: deac8703da5f ("PM / OPP: _of_add_opp_table_v2(): increment count only if OPP is added") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-10-04opp: Add more resource-managed variants of dev_pm_opp_of_add_table()Dmitry Osipenko1-7/+39
Add resource-managed variants of dev_pm_opp_of_add_table_indexed() and dev_pm_opp_of_add_table_noclk(), allowing drivers to remove boilerplate code. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [ Viresh: Added underscore to devm_of_add_table_indexed() ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-10-04opp: Change type of dev_pm_opp_attach_genpd(names) argumentDmitry Osipenko1-3/+3
Elements of the 'names' array are not changed by the code, constify them for consistency. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-10-04opp: Fix required-opps phandle array count checkPavankumar Kondeti1-1/+1
The 'required-opps' property is optional. So of_count_phandle_with_args() can return -ENOENT when queried for required-opps. Handle this case. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-08-30Merge branches 'pm-pci', 'pm-sleep', 'pm-domains' and 'powercap'Rafael J. Wysocki1-10/+2
* pm-pci: PCI: PM: Enable PME if it can be signaled from D3cold PCI: PM: Avoid forcing PCI_D0 for wakeup reasons inconsistently PCI: Use pci_update_current_state() in pci_enable_device_flags() * pm-sleep: PM: sleep: unmark 'state' functions as kernel-doc PM: sleep: check RTC features instead of ops in suspend_test PM: sleep: s2idle: Replace deprecated CPU-hotplug functions * pm-domains: PM: domains: Fix domain attach for CONFIG_PM_OPP=n arm64: dts: sc7180: Add required-opps for i2c PM: domains: Add support for 'required-opps' to set default perf state opp: Don't print an error if required-opps is missing * powercap: powercap: Add Power Limit4 support for Alder Lake SoC powercap: intel_rapl: Replace deprecated CPU-hotplug functions
2021-08-30Merge back new PM domains material for v5.15.Rafael J. Wysocki1-10/+2
2021-08-23opp: core: Check for pending links before reading required_opp pointersMarijn Suijten1-4/+4
Commit 4fa82a87ba55 ("opp: Allow required-opps to be used for non genpd use cases") dereferences the pointers in required_opp_tables but these might be set to an ERR_PTR if the list still has lazy links pending, resulting in segfaults. Prior to this patch IS_ERR was also checked on required_opp_tables[i] before reading ->is_genpd inside _opp_table_alloc_required_tables, which is at the same time the predicate to add this table to the lazy list. This segfault is solved by reordering the checks to bail on lazy pending tables before reading ->is_genpd. Fixes: 4fa82a87ba55 ("opp: Allow required-opps to be used for non genpd use cases") Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-08-16opp: Don't print an error if required-opps is missingRajendra Nayak1-10/+2
The 'required-opps' property is considered optional, hence remove the pr_err() in of_parse_required_opp() when we find the property is missing. While at it, also fix the return value of of_get_required_opp_performance_state() when of_parse_required_opp() fails, return a -ENODEV instead of the -EINVAL. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-08-16opp: Drop empty-table checks from _put functionsDmitry Osipenko1-15/+0
The current_opp is released only when whole OPP table is released, otherwise it's only marked as removed by dev_pm_opp_remove_table(). Functions like dev_pm_opp_put_clkname() and dev_pm_opp_put_supported_hw() are checking whether OPP table is empty and it's not if current_opp is set since it holds the refcount of OPP, this produces a noisy warning from these functions about busy OPP table. Remove the checks to fix it. Cc: stable@vger.kernel.org Fixes: 81c4d8a3c414 ("opp: Keep track of currently programmed OPP") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-08-04opp: remove WARN when no valid OPPs remainMichał Mirosław1-2/+3
This WARN can be triggered per-core and the stack trace is not useful. Replace it with plain dev_err(). Fix a comment while at it. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-06-18opp: Allow required-opps to be used for non genpd use casesHsin-Yi Wang2-22/+12
Don't limit required_opp_table to genpd only. One possible use case is cpufreq based devfreq governor, which can use required-opps property to derive devfreq from cpufreq. Though the OPP core still doesn't support non-genpd required-opps in _set_required_opps(). Suggested-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> [ Viresh: Update _set_required_opps() to check for genpd ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-05-20opp: use list_del_init instead of list_del/INIT_LIST_HEADYang Yingliang1-2/+1
Using list_del_init() instead of list_del() + INIT_LIST_HEAD() to simpify the code. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-16opp: Change return type of devm_pm_opp_attach_genpd()Dmitry Osipenko1-12/+6
Make devm_pm_opp_attach_genpd() to return error code instead of opp_table pointer in order to have return type consistent with the other resource-managed OPP helpers. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-16opp: Change return type of devm_pm_opp_register_set_opp_helper()Dmitry Osipenko1-12/+6
Make devm_pm_opp_register_set_opp_helper() to return error code instead of opp_table pointer in order to have return type consistent with the other resource-managed OPP helpers. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-15opp: Add devres wrapper for dev_pm_opp_of_add_tableYangtao Li1-0/+36
Add devres wrapper for dev_pm_opp_of_add_table() to simplify drivers code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-15opp: Add devres wrapper for dev_pm_opp_set_supported_hwYangtao Li1-0/+29
Add devres wrapper for dev_pm_opp_set_supported_hw() to simplify drivers code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-15opp: Add devres wrapper for dev_pm_opp_set_regulatorsYangtao Li1-0/+30
Add devres wrapper for dev_pm_opp_set_regulators() to simplify drivers code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-15opp: Add devres wrapper for dev_pm_opp_set_clknameYangtao Li1-0/+27
Add devres wrapper for dev_pm_opp_set_clkname() to simplify drivers code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-12opp: Don't drop extra references to OPPs accidentallyBeata Michalska2-23/+27
We are required to call dev_pm_opp_put() from outside of the opp_table->lock as debugfs removal needs to happen lock-less to avoid circular dependency issues. commit cf1fac943c63 ("opp: Reduce the size of critical section in _opp_kref_release()") tried to fix that introducing a new routine _opp_get_next() which keeps returning OPPs that can be freed by the callers and this routine shall be called without holding the opp_table->lock. Though the commit overlooked the fact that the OPPs can be referenced by other users as well and this routine will end up dropping references which were taken by other users and hence freeing the OPPs prematurely. In effect, other users of the OPPs will end up having invalid pointers at hand. We didn't see any crash reports earlier as the exact situation never happened, though it is certainly possible. We need a way to mark which OPPs are no longer referenced by the OPP core, so we don't drop extra references to them accidentally. This commit adds another OPP flag, "removed", which is used to track this. And now we should never end up dropping extra references to the OPPs. Cc: v5.11+ <stable@vger.kernel.org> # v5.11+ Fixes: cf1fac943c63 ("opp: Reduce the size of critical section in _opp_kref_release()") Signed-off-by: Beata Michalska <beata.michalska@arm.com> [ Viresh: Almost rewrote entire patch, added new "removed" field, rewrote commit log and added the correct Fixes tag. ] Co-developed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-18opp: Don't skip freq update for different frequencyJonathan Marek2-3/+7
We skip the OPP update if the current and target OPPs are same. This is fine for the devices that don't support frequency but may cause issues for the ones that need to program frequency. An OPP entry doesn't really signify a single operating frequency but rather the highest frequency at which the other properties of the OPP entry apply. And we may reach here with different frequency values, while all of them would point to the same OPP entry in the OPP table. We just need to update the clock frequency in that case, though in order to not add special exit points we reuse the code flow from a normal path. While at it, rearrange the conditionals in the 'if' statement to check 'enabled' flag at the end. Fixes: 81c4d8a3c414 ("opp: Keep track of currently programmed OPP") Signed-off-by: Jonathan Marek <jonathan@marek.ca> [ Viresh: Improved commit log and subject, rename current_freq as current_rate, document it, remove local variable and rearrange code. ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-04OPP: Add function to look up required OPP's for a given OPPSaravana Kannan1-0/+55
Add a function that allows looking up required OPPs given a source OPP table, destination OPP table and the source OPP. Signed-off-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> [ Viresh: Rearranged code, fixed return errors ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02opp: Don't ignore clk_get() errors other than -ENOENTViresh Kumar1-7/+11
Not all devices that need to use OPP core need to have clocks, a missing clock is fine in which case -ENOENT shall be returned by clk_get(). Anything else is an error and must be handled properly. Reported-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02opp: Update bandwidth requirements based on scaling up/downViresh Kumar1-13/+27
The bandwidth must be scaled at a different point in the code flow based on if we are scaling up or down the frequency, otherwise this may cause undesired effects as the device will try to use more of the memory bandwidth which may be shared across several devices. Much like how regulators and required-opps are programmed. Reported-by: Dmitry Osipenko <digetx@gmail.com> Reported-by: Akhil P Oommen <akhilpo@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02opp: Allow lazy-linking of required-oppsViresh Kumar3-16/+161
The OPP core currently requires the required opp tables to be available before the dependent OPP table is added, as it needs to create links from the dependent OPP table to the required ones. This may not be convenient for all the platforms though, as this requires strict ordering for probing the drivers. This patch allows lazy-linking of the required-opps. The OPP tables for which the required-opp-tables aren't available at the time of their initialization, are added to a special list of OPP tables: lazy_opp_tables. Later on, whenever a new OPP table is registered with the OPP core, we check if it is required by an OPP table in the pending list; if yes, then we complete the linking then and there. An OPP table is marked unusable until the time all its required-opp tables are available. And if lazy-linking fails for an OPP table, the OPP core disables all of its OPPs to make sure no one can use them. Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02opp: Remove dev_pm_opp_set_bw()Viresh Kumar1-36/+5
All the users have migrated to dev_pm_opp_set_opp() now, get rid of the duplicate API, dev_pm_opp_set_bw(), which only performs a part of the new API. While at it, remove the unnecessary parameter to _set_opp_bw(). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02opp: Implement dev_pm_opp_set_opp()Viresh Kumar1-0/+28
The new helper dev_pm_opp_set_opp() can be used for configuring the devices for a particular OPP and can be used by different type of devices, even the ones which don't change frequency (like power domains). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02opp: Update parameters of _set_opp_custom()Viresh Kumar1-13/+9
Drop the unnecessary parameters and follow the pattern from _generic_set_opp_regulator(). While at it, also remove the local variable old_freq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02opp: Allow _generic_set_opp_clk_only() to work for non-freq devicesViresh Kumar1-0/+4
In order to avoid conditional statements at the caller site, this patch updates _generic_set_opp_clk_only() to work for devices that don't change frequency (like power domains, etc.). Return 0 if the clk pointer passed to this routine is not valid. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02opp: Allow _generic_set_opp_regulator() to work for non-freq devicesViresh Kumar1-13/+12
The _generic_set_opp_regulator() helper will be used for devices which don't change frequency (like power domains, etc.) later on, prepare for that by not relying on frequency for making decisions here. While at it, update its parameters to pass only what is necessary. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02opp: Allow _set_opp() to work for non-freq devicesViresh Kumar1-5/+11
The _set_opp() helper will be used for devices which don't change frequency (like power domains, etc.) later on, prepare for that by not relying on frequency for making decisions here. While at it, also update the debug print to contain all relevant information. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02opp: Split _set_opp() out of dev_pm_opp_set_rate()Viresh Kumar1-55/+71
The _set_opp() helper will be used for devices which don't change their frequency (like power domains, etc.) later on, prepare for that by breaking the generic part out of dev_pm_opp_set_rate(). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02opp: Keep track of currently programmed OPPViresh Kumar2-31/+55
The dev_pm_opp_set_rate() helper needs to know the currently programmed OPP to make few decisions and currently we try to find it on every invocation of this routine. Lets start keeping track of the current_opp programmed for the devices of the opp table, that will be quite useful going forward. If we fail to find the current OPP, we pick the first one available in the list, as the list is in ascending order of frequencies, level, or bandwidth and that's the best guess we can make anyway. Note that we used to do the frequency comparison a bit early in dev_pm_opp_set_rate() previously, and now instead we check the target opp, which shall be more accurate anyway. We need to make sure that current_opp's memory doesn't get freed while it is being used and so we keep a reference of it until the time it is used. Now that current_opp will always be set, we can drop some unnecessary checks as well. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02opp: No need to check clk for errorsViresh Kumar1-13/+4
Clock is not optional for users who call into dev_pm_opp_set_rate(). Remove the unnecessary checks. While at it also drop the local variable for clk and use opp_table->clk instead. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02opp: Rename _opp_set_rate_zero()Viresh Kumar1-2/+2
This routine has nothing to do with frequency, it just disables all the resources previously enabled. Rename it to match its purpose. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02opp: Make _set_opp_custom() work without regulatorsDmitry Osipenko1-11/+18
Check whether OPP table has regulators in _set_opp_custom() and set up dev_pm_set_opp_data accordingly. Now _set_opp_custom() works properly, i.e. it doesn't crash if OPP table doesn't have assigned regulators. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [ Viresh: Rearrange the routine a bit ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02opp: Prepare for ->set_opp() helper to work without regulatorsViresh Kumar2-38/+48
Until now the ->set_opp() helper (i.e. special implementation for setting the OPPs for platforms) was implemented only to take care of multiple regulators case, but going forward we would need that for other use cases as well. This patch prepares for that by allocating the regulator specific part from dev_pm_opp_set_regulators() and the opp helper part from dev_pm_opp_register_set_opp_helper(). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02opp: Print OPP level in debug message of _opp_add_static_v2()Dmitry Osipenko1-2/+3
Print OPP level in debug message of _opp_add_static_v2(). This helps to chase GENPD bugs. Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Tested-by: Matt Merhar <mattmerhar@protonmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02opp: Handle missing OPP table in dev_pm_opp_xlate_performance_state()Dmitry Osipenko1-1/+1
NVIDIA Tegra SoCs have a power domains topology such that child domains only clamp a power rail, while parent domain controls shared performance state of the multiple child domains. In this case child's domain doesn't need to have OPP table. Hence we want to allow children power domains to pass performance state to the parent domain if child's domain doesn't have OPP table. The dev_pm_opp_xlate_performance_state() gets src_table=NULL if a child power domain doesn't have OPP table and in this case we should pass the performance state to the parent domain. Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Tested-by: Matt Merhar <mattmerhar@protonmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02opp: Add devm_pm_opp_attach_genpdDmitry Osipenko1-0/+36
Add resource-managed version of dev_pm_opp_attach_genpd(). Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [ Viresh: Manually apply the patch and relocate the routines ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02opp: Add devm_pm_opp_register_set_opp_helperDmitry Osipenko1-0/+34
Add resource-managed version of dev_pm_opp_register_set_opp_helper(). Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Tested-by: Matt Merhar <mattmerhar@protonmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [ Viresh: Manually apply the patch and relocate the routines ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02opp: Add dev_pm_opp_of_add_table_noclk()Viresh Kumar1-0/+18
A few drivers have device's clk but they don't want the OPP core to handle that. Add a new helper for them, dev_pm_opp_of_add_table_noclk(). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02opp: Defer acquiring the clk until OPPs are addedViresh Kumar3-33/+50
We acquire the clk at the time the OPP table is allocated, though it works fine, it is not the best place to do so. One of the main reason being we may need to acquire it again from dev_pm_opp_set_clkname() if the platform wants another clock to be acquired instead. There is also requirement from some of the platforms where they do not want the OPP core to manage the clock at all. This patch hence defers acquiring the clk until the time we are certain about which clk we need to acquire and if we really need to acquire one. With this commit, the clk will get acquired either from dev_pm_opp_set_clkname() or while we initialize the OPPs within the table. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02opp: Create _of_add_table_indexed() to reduce code duplicationViresh Kumar1-48/+33
The implementation of dev_pm_opp_of_add_table() and dev_pm_opp_of_add_table_indexed() are almost identical. Create _of_add_table_indexed() to reduce code redundancy. Also remove the duplication of the doc style comments by referring to dev_pm_opp_of_add_table() from dev_pm_opp_of_add_table_indexed(). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02opp: Add dev_pm_opp_sync_regulators()Dmitry Osipenko1-0/+41
Extend OPP API with dev_pm_opp_sync_regulators() function, which syncs voltage state of regulators. Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Tested-by: Matt Merhar <mattmerhar@protonmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [ Viresh: Added unlikely() ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02opp: Add dev_pm_opp_get_required_pstate()Dmitry Osipenko1-0/+22
Add dev_pm_opp_get_required_pstate() which allows OPP users to retrieve required performance state of a given OPP. Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Tested-by: Matt Merhar <mattmerhar@protonmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02opp: Add dev_pm_opp_find_level_ceil()Dmitry Osipenko1-0/+49
Add a ceil version of the dev_pm_opp_find_level(). It's handy to have if levels don't start from 0 in OPP table and zero usually means a minimal level. Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Tested-by: Matt Merhar <mattmerhar@protonmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02opp: Staticize _add_opp_table()Viresh Kumar2-2/+1
_add_opp_table() isn't used outside of core.c, mark it static. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>