summaryrefslogtreecommitdiff
path: root/drivers/oprofile
AgeCommit message (Collapse)AuthorFilesLines
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2-0/+2
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-02sched/headers: Prepare to move the get_task_struct()/put_task_struct() and ↵Ingo Molnar1-0/+1
related APIs from <linux/sched.h> to <linux/sched/task.h> But first update usage sites with the new header dependency. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar1-1/+1
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for the removal of <asm/ptrace.h> from <linux/sched.h>Ingo Molnar1-0/+2
Fix up missing #includes in other places that rely on sched.h doing that for them. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/mm.h> We are going to split <linux/sched/mm.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/mm.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. The APIs that are going to be moved first are: mm_alloc() __mmdrop() mmdrop() mmdrop_async_fn() mmdrop_async() mmget_not_zero() mmput() mmput_async() get_task_mm() mm_access() mm_release() Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds2-2/+2
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-18Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: "In this pile: - autofs-namespace series - dedupe stuff - more struct path constification" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits) ocfs2: implement the VFS clone_range, copy_range, and dedupe_range features ocfs2: charge quota for reflinked blocks ocfs2: fix bad pointer cast ocfs2: always unlock when completing dio writes ocfs2: don't eat io errors during _dio_end_io_write ocfs2: budget for extent tree splits when adding refcount flag ocfs2: prohibit refcounted swapfiles ocfs2: add newlines to some error messages ocfs2: convert inode refcount test to a helper simple_write_end(): don't zero in short copy into uptodate exofs: don't mess with simple_write_{begin,end} 9p: saner ->write_end() on failing copy into non-uptodate page fix gfs2_stuffed_write_end() on short copies fix ceph_write_end() nfs_write_end(): fix handling of short copies vfs: refactor clone/dedupe_file_range common functions fs: try to clone files first in vfs_copy_file_range vfs: misc struct path constification namespace.c: constify struct path passed to a bunch of primitives quota: constify struct path in quota_on ...
2016-12-06constify get_dcookie() and friendsAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-12-02oprofile/nmi timer: Convert to hotplug state machineSebastian Andrzej Siewior1-39/+19
Install the callbacks via the state machine and let the core invoke the callbacks on the already online CPUs. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: oprofile-list@lists.sf.net Cc: Robert Richter <rric@kernel.org> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20161126231350.10321-6-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-11Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: ">rename2() work from Miklos + current_time() from Deepa" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Replace current_fs_time() with current_time() fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps fs: Replace CURRENT_TIME with current_time() for inode timestamps fs: proc: Delete inode time initializations in proc_alloc_inode() vfs: Add current_time() api vfs: add note about i_op->rename changes to porting fs: rename "rename2" i_op to "rename" vfs: remove unused i_op->rename fs: make remaining filesystems use .rename2 libfs: support RENAME_NOREPLACE in simple_rename() fs: support RENAME_NOREPLACE for local filesystems ncpfs: fix unused variable warning
2016-09-28fs: Replace CURRENT_TIME with current_time() for inode timestampsDeepa Dinamani1-1/+1
CURRENT_TIME macro is not appropriate for filesystems as it doesn't use the right granularity for filesystem timestamps. Use current_time() instead. CURRENT_TIME is also not y2038 safe. This is also in preparation for the patch that transitions vfs timestamps to use 64 bit time and hence make them y2038 safe. As part of the effort current_time() will be extended to do range checks. Hence, it is necessary for all file system timestamps to use current_time(). Also, current_time() will be transitioned along with vfs to be y2038 safe. Note that whenever a single call to current_time() is used to change timestamps in different inodes, it is because they share the same time granularity. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Felipe Balbi <balbi@kernel.org> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by: David Sterba <dsterba@suse.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-19oprofile/timer: Convert to hotplug state machineSebastian Andrzej Siewior1-21/+23
Install the callbacks via the state machine and let the core invoke the callbacks on the already online CPUs. Since the online target runs always on the target CPU we can drop smp_call_function_single(). The functions is invoked with interrupts off to keep the old calling convention. If the maintainer things that this function can be called with interrupts enabled then it can be removed :) Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Robert Richter <rric@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: oprofile-list@lists.sf.net Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160906170457.32393-10-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov1-2/+2
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-23wrappers for ->i_mutex accessAl Viro1-8/+8
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-27Merge branch 'for-linus' of ↵Linus Torvalds1-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull fourth vfs update from Al Viro: "d_inode() annotations from David Howells (sat in for-next since before the beginning of merge window) + four assorted fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: RCU pathwalk breakage when running into a symlink overmounting something fix I_DIO_WAKEUP definition direct-io: only inc/dec inode->i_dio_count for file systems fs/9p: fix readdir() VFS: assorted d_backing_inode() annotations VFS: fs/inode.c helpers: d_inode() annotations VFS: fs/cachefiles: d_backing_inode() annotations VFS: fs library helpers: d_inode() annotations VFS: assorted weird filesystems: d_inode() annotations VFS: normal filesystems (and lustre): d_inode() annotations VFS: security/: d_inode() annotations VFS: security/: d_backing_inode() annotations VFS: net/: d_inode() annotations VFS: net/unix: d_backing_inode() annotations VFS: kernel/: d_inode() annotations VFS: audit: d_backing_inode() annotations VFS: Fix up some ->d_inode accesses in the chelsio driver VFS: Cachefiles should perform fs modifications on the top layer only VFS: AF_UNIX sockets should call mknod on the top layer only
2015-04-17oprofile: reduce mmap_sem hold for mm->exe_fileDavidlohr Bueso1-14/+16
sync_buffer() needs the mmap_sem for two distinct operations, both only occurring upon user context switch handling: 1) Dealing with the exe_file. 2) Adding the dcookie data as we need to lookup the vma that backs it. This is done via add_sample() and add_data(). This patch isolates 1), for it will no longer need the mmap_sem for serialization. However, for now, make of the more standard get_mm_exe_file(), requiring only holding the mmap_sem to read the value, and relying on reference counting to make sure that the exe file won't dissappear underneath us while doing the get dcookie. As a consequence, for 2) we move the mmap_sem locking into where we really need it, in lookup_dcookie(). The benefits are twofold: reduce mmap_sem hold times, and cleaner code. [akpm@linux-foundation.org: export get_mm_exe_file for arch/x86/oprofile/oprofile.ko] Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Robert Richter <rric@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15VFS: assorted weird filesystems: d_inode() annotationsDavid Howells1-8/+8
Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-08-26drivers/oprofile: Replace __get_cpu_var uses for address calculationChristoph Lameter2-6/+6
Replace the uses of __get_cpu_var for address calculation with this_cpu_ptr. Cc: Robert Richter <rric@kernel.org> Cc: oprofile-list@lists.sf.net Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-03-20oprofile, nmi-timer: Fix CPU hotplug callback registrationSrivatsa S. Bhat1-10/+13
Subsystems that want to register CPU hotplug callbacks, as well as perform initialization for the CPUs that are already online, often do it as shown below: get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); register_cpu_notifier(&foobar_cpu_notifier); put_online_cpus(); This is wrong, since it is prone to ABBA deadlocks involving the cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently with CPU hotplug operations). Instead, the correct and race-free way of performing the callback registration is: cpu_notifier_register_begin(); for_each_online_cpu(cpu) init_cpu(cpu); /* Note the use of the double underscored version of the API */ __register_cpu_notifier(&foobar_cpu_notifier); cpu_notifier_register_done(); Fix the nmi-timer code in oprofile by using this latter form of callback registration. Cc: Robert Richter <rric@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-04oprofile: get rid of pointless forward declarations of struct super_blockAl Viro2-2/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-04oprofilefs_create_...() do not need superblock argumentAl Viro4-39/+38
same story as with oprofilefs_mkdir() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-04oprofilefs_mkdir() doesn't need superblock argumentAl Viro3-11/+10
it's always equal to ->d_sb of the second argument (parent dentry), due to either being literally that, or ->d_sb of parent's parent. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-04don't bother with passing superblock to oprofile_create_stats_files()Al Viro3-14/+14
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-04oprofile: don't bother with passing superblock to ->create_files()Al Viro2-9/+9
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-04don't bother passing sb to oprofile_create_files()Al Viro3-15/+15
it's always root->d_sb Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-15drivers: delete __cpuinit usage from all remaining drivers filesPaul Gortmaker1-2/+2
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the remaining one-off uses of the __cpuinit macros from all C files in the drivers/* directory. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-03-04fs: Limit sys_mount to only request filesystem modules.Eric W. Biederman1-0/+1
Modify the request_module to prefix the file system type with "fs-" and add aliases to all of the filesystems that can be built as modules to match. A common practice is to build all of the kernel code and leave code that is not commonly needed as modules, with the result that many users are exposed to any bug anywhere in the kernel. Looking for filesystems with a fs- prefix limits the pool of possible modules that can be loaded by mount to just filesystems trivially making things safer with no real cost. Using aliases means user space can control the policy of which filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf with blacklist and alias directives. Allowing simple, safe, well understood work-arounds to known problematic software. This also addresses a rare but unfortunate problem where the filesystem name is not the same as it's module name and module auto-loading would not work. While writing this patch I saw a handful of such cases. The most significant being autofs that lives in the module autofs4. This is relevant to user namespaces because we can reach the request module in get_fs_type() without having any special permissions, and people get uncomfortable when a user specified string (in this case the filesystem type) goes all of the way to request_module. After having looked at this issue I don't think there is any particular reason to perform any filtering or permission checks beyond making it clear in the module request that we want a filesystem module. The common pattern in the kernel is to call request_module() without regards to the users permissions. In general all a filesystem module does once loaded is call register_filesystem() and go to sleep. Which means there is not much attack surface exposed by loading a filesytem module unless the filesystem is mounted. In a user namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT, which most filesystems do not set today. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Kees Cook <keescook@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-23oprofilefs: add missing ->i_mutex locking in object creationAl Viro1-3/+13
Right now it's safe only during initial mount *and* functions are asking to be abused for dynamic adding of objects. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-09mm: use mm->exe_file instead of first VM_EXECUTABLE vma->vm_fileKonstantin Khlebnikov1-14/+3
Some security modules and oprofile still uses VM_EXECUTABLE for retrieving a task's executable file. After this patch they will use mm->exe_file directly. mm->exe_file is protected with mm->mmap_sem, so locking stays the same. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: Chris Metcalf <cmetcalf@tilera.com> [arch/tile] Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> [tomoyo] Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Acked-by: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-27oprofile: Remove 'WQ on CPUx, prefer CPUy' warningRobert Richter1-8/+3
Under certain workloads we see the following warnings: WQ on CPU0, prefer CPU1 WQ on CPU0, prefer CPU2 WQ on CPU0, prefer CPU3 It warns the user that the wq to access a per-cpu buffers runs not on the same cpu. This happens if the wq is rescheduled on a different cpu than where the buffer is located. This was probably implemented to detect performance issues. Not sure if there actually is one as the buffers are copied to a single buffer anyway which should be the actual bottleneck. We wont change WQ implementation. Since a user can do nothing the warning is pointless. Removing it. Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Robert Richter <robert.richter@amd.com>
2012-06-22oprofile, perf: Use per-cpu frameworkRobert Richter1-12/+11
This changes oprofile_perf.c to use the per-cpu framework. Using the per-cpu framework should avoid error like the following: arch/arm/oprofile/../../../drivers/oprofile/oprofile_perf.c:28:28: error: variably modified 'perf_events' at file scope Reported-by: William Cohen <wcohen@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
2012-06-21oprofile: perf: use NR_CPUS instead or nr_cpumask_bits for static arrayWill Deacon1-1/+1
The OProfile perf backend uses a static array to keep track of the perf events on the system. When compiling with CONFIG_CPUMASK_OFFSTACK=y && SMP, nr_cpumask_bits is not a compile-time constant and the build will fail with: oprofile_perf.c:28: error: variably modified 'perf_events' at file scope This patch uses NR_CPUs instead of nr_cpumask_bits for the array initialisation. If this causes space problems in the future, we can always move to dynamic allocation for the events array. Cc: Matt Fleming <matt@console-pimps.org> Reported-by: Russell King - ARM Linux <linux@arm.linux.org.uk> Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: <stable@vger.kernel.org> # v2.6.37+ Signed-off-by: Robert Richter <robert.richter@amd.com>
2012-04-06simple_open: automatically convert to simple_open()Stephen Boyd1-11/+3
Many users of debugfs copy the implementation of default_open() when they want to support a custom read/write function op. This leads to a proliferation of the default_open() implementation across the entire tree. Now that the common implementation has been consolidated into libfs we can replace all the users of this function with simple_open(). This replacement was done with the following semantic patch: <smpl> @ open @ identifier open_f != simple_open; identifier i, f; @@ -int open_f(struct inode *i, struct file *f) -{ ( -if (i->i_private) -f->private_data = i->i_private; | -f->private_data = i->i_private; ) -return 0; -} @ has_open depends on open @ identifier fops; identifier open.open_f; @@ struct file_operations fops = { ... -.open = open_f, +.open = simple_open, ... }; </smpl> [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21tidy up after d_make_root() conversionAl Viro1-6/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-21switch open-coded instances of d_make_root() to new helperAl Viro1-4/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-06Merge branch 'perf-core-for-linus' of ↵Linus Torvalds4-34/+209
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (106 commits) perf kvm: Fix copy & paste error in description perf script: Kill script_spec__delete perf top: Fix a memory leak perf stat: Introduce get_ratio_color() helper perf session: Remove impossible condition check perf tools: Fix feature-bits rework fallout, remove unused variable perf script: Add generic perl handler to process events perf tools: Use for_each_set_bit() to iterate over feature flags perf tools: Unify handling of features when writing feature section perf report: Accept fifos as input file perf tools: Moving code in some files perf tools: Fix out-of-bound access to struct perf_session perf tools: Continue processing header on unknown features perf tools: Improve macros for struct feature_ops perf: builtin-record: Document and check that mmap_pages must be a power of two. perf: builtin-record: Provide advice if mmap'ing fails with EPERM. perf tools: Fix truncated annotation perf script: look up thread using tid instead of pid perf tools: Look up thread names for system wide profiling perf tools: Fix comm for processes with named threads ...
2011-12-20Merge branch 'for-tip' of ↵Ingo Molnar1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/core
2011-12-19oprofile: Fix uninitialized memory access when writing to writing to oprofilefsRobert Richter2-5/+13
If oprofilefs_ulong_from_user() is called with count equals zero, *val remains unchanged. Depending on the implementation it might be uninitialized. Change oprofilefs_ulong_from_user()'s interface to return count on success. Thus, we are able to return early if count equals zero which avoids using *val uninitialized. Fixing all users of oprofilefs_ulong_ from_user(). This follows write syscall implementation when count is zero: "If count is zero ... [and if] no errors are detected, 0 will be returned without causing any other effect." (man 2 write) Reported-By: Mike Waychison <mikew@google.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: <stable@vger.kernel.org> Cc: oprofile-list <oprofile-list@lists.sourceforge.net> Link: http://lkml.kernel.org/r/20111219153830.GH16765@erda.amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-07oprofile: Fix oprofile_timer_exit() breakageRobert Richter1-1/+0
Removing remainings of oprofile_timer_exit() completly. Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-11-15Merge branch 'core' of git://amd64.org/linux/rric into perf/coreIngo Molnar4-18/+214
2011-11-15Merge branch 'urgent' of git://amd64.org/linux/rric into perf/urgentIngo Molnar2-5/+25
2011-11-04oprofile, x86: Reimplement nmi timer mode using perf eventRobert Richter3-13/+193
The legacy x86 nmi watchdog code was removed with the implementation of the perf based nmi watchdog. This broke Oprofile's nmi timer mode. To run nmi timer mode we relied on a continuous ticking nmi source which the nmi watchdog provided. The nmi tick was no longer available and current watchdog can not be used anymore since it runs with very long periods in the range of seconds. This patch reimplements the nmi timer mode using a perf counter nmi source. V2: * removing pr_info() * fix undefined reference to `__udivdi3' for 32 bit build * fix section mismatch of .cpuinit.data:nmi_timer_cpu_nb * removed nmi timer setup in arch/x86 * implemented function stubs for op_nmi_init/exit() * made code more readable in oprofile_init() V3: * fix architectural initialization in oprofile_init() * fix CONFIG_OPROFILE_NMI_TIMER dependencies Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-11-04oprofile: Remove exit function for timer modeRobert Richter2-21/+17
Remove exit functions by moving init/exit code to oprofile's setup/ shutdown functions. Doing so the oprofile module exit code will be easier and less error-prone. Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-11-04oprofile: Fix crash when unloading module (hr timer mode)Robert Richter2-5/+25
Oprofile may crash in a KVM guest while unlaoding modules. This happens if oprofile_arch_init() fails and oprofile switches to the hr timer mode as a fallback. In this case oprofile_arch_exit() is called, but it never was initialized properly which causes the crash. This patch fixes this. oprofile: using timer interrupt. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58 PGD 41da3f067 PUD 41d80e067 PMD 0 Oops: 0002 [#1] PREEMPT SMP CPU 5 Modules linked in: oprofile(-) Pid: 2382, comm: modprobe Not tainted 3.1.0-rc7-00018-g709a39d #18 Advanced Micro Device Anaheim/Anaheim RIP: 0010:[<ffffffff8123c226>] [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58 RSP: 0018:ffff88041de1de98 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffffffffa00060e0 RCX: dead000000200200 RDX: 0000000000000000 RSI: dead000000100100 RDI: ffffffff8178c620 RBP: ffff88041de1dea8 R08: 0000000000000001 R09: 0000000000000082 R10: 0000000000000000 R11: ffff88041de1dde8 R12: 0000000000000080 R13: fffffffffffffff5 R14: 0000000000000001 R15: 0000000000610210 FS: 00007f9ae5bef700(0000) GS:ffff88042fd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 000000041ca44000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 2382, threadinfo ffff88041de1c000, task ffff88042db6d040) Stack: ffff88041de1deb8 ffffffffa0006770 ffff88041de1deb8 ffffffffa000251e ffff88041de1dec8 ffffffffa00022c2 ffff88041de1ded8 ffffffffa0004993 ffff88041de1df78 ffffffff81073115 656c69666f72706f 0000000000610200 Call Trace: [<ffffffffa000251e>] op_nmi_exit+0x15/0x17 [oprofile] [<ffffffffa00022c2>] oprofile_arch_exit+0xe/0x10 [oprofile] [<ffffffffa0004993>] oprofile_exit+0x13/0x15 [oprofile] [<ffffffff81073115>] sys_delete_module+0x1c3/0x22f [<ffffffff811bf09e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8148070b>] system_call_fastpath+0x16/0x1b Code: 20 c6 78 81 e8 c5 cc 23 00 48 8b 13 48 8b 43 08 48 be 00 01 10 00 00 00 ad de 48 b9 00 02 20 00 00 00 ad de 48 c7 c7 20 c6 78 81 89 42 08 48 89 10 48 89 33 48 89 4b 08 e8 a6 c0 23 00 5a 5b RIP [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58 RSP <ffff88041de1de98> CR2: 0000000000000008 ---[ end trace 06d4e95b6aa3b437 ]--- CC: stable@kernel.org # 2.6.37+ Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-09-13locking, oprofile: Annotate oprofilefs lock as rawThomas Gleixner3-7/+7
The oprofilefs_lock can be taken in atomic context (in profiling interrupts) and therefore cannot cannot be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-27atomic: use <linux/atomic.h>Arun Sharma1-1/+1
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-21perf: Remove the nmi parameter from the oprofile_perf backendWill Deacon1-1/+1
In commit a8b0ca17b80e ("perf: Remove the nmi parameter from the swevent and overflow interface") one site was overlooked. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110708173442.GB31972@e102144-lin.cambridge.arm.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-01perf: Add context field to perf_eventAvi Kivity1-1/+1
The perf_event overflow handler does not receive any caller-derived argument, so many callers need to resort to looking up the perf_event in their local data structure. This is ugly and doesn't scale if a single callback services many perf_events. Fix by adding a context parameter to perf_event_create_kernel_counter() (and derived hardware breakpoints APIs) and storing it in the perf_event. The field can be accessed from the callback as event->overflow_handler_context. All callers are updated. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1309362157-6596-2-git-send-email-avi@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-31oprofile: Fix locking dependency in sync_start()Robert Richter1-6/+2
This fixes the A->B/B->A locking dependency, see the warning below. The function task_exit_notify() is called with (task_exit_notifier) .rwsem set and then calls sync_buffer() which locks buffer_mutex. In sync_start() the buffer_mutex was set to prevent notifier functions to be started before sync_start() is finished. But when registering the notifier, (task_exit_notifier).rwsem is locked too, but now in different order than in sync_buffer(). In theory this causes a locking dependency, what does not occur in practice since task_exit_notify() is always called after the notifier is registered which means the lock is already released. However, after checking the notifier functions it turned out the buffer_mutex in sync_start() is unnecessary. This is because sync_buffer() may be called from the notifiers even if sync_start() did not finish yet, the buffers are already allocated but empty. No need to protect this with the mutex. So we fix this theoretical locking dependency by removing buffer_mutex in sync_start(). This is similar to the implementation before commit: 750d857 oprofile: fix crash when accessing freed task structs which introduced the locking dependency. Lockdep warning: oprofiled/4447 is trying to acquire lock: (buffer_mutex){+.+...}, at: [<ffffffffa0000e55>] sync_buffer+0x31/0x3ec [oprofile] but task is already holding lock: ((task_exit_notifier).rwsem){++++..}, at: [<ffffffff81058026>] __blocking_notifier_call_chain+0x39/0x67 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 ((task_exit_notifier).rwsem){++++..}: [<ffffffff8106557f>] lock_acquire+0xf8/0x11e [<ffffffff81463a2b>] down_write+0x44/0x67 [<ffffffff810581c0>] blocking_notifier_chain_register+0x52/0x8b [<ffffffff8105a6ac>] profile_event_register+0x2d/0x2f [<ffffffffa00013c1>] sync_start+0x47/0xc6 [oprofile] [<ffffffffa00001bb>] oprofile_setup+0x60/0xa5 [oprofile] [<ffffffffa00014e3>] event_buffer_open+0x59/0x8c [oprofile] [<ffffffff810cd3b9>] __dentry_open+0x1eb/0x308 [<ffffffff810cd59d>] nameidata_to_filp+0x60/0x67 [<ffffffff810daad6>] do_last+0x5be/0x6b2 [<ffffffff810dbc33>] path_openat+0xc7/0x360 [<ffffffff810dbfc5>] do_filp_open+0x3d/0x8c [<ffffffff810ccfd2>] do_sys_open+0x110/0x1a9 [<ffffffff810cd09e>] sys_open+0x20/0x22 [<ffffffff8146ad4b>] system_call_fastpath+0x16/0x1b -> #0 (buffer_mutex){+.+...}: [<ffffffff81064dfb>] __lock_acquire+0x1085/0x1711 [<ffffffff8106557f>] lock_acquire+0xf8/0x11e [<ffffffff814634f0>] mutex_lock_nested+0x63/0x309 [<ffffffffa0000e55>] sync_buffer+0x31/0x3ec [oprofile] [<ffffffffa0001226>] task_exit_notify+0x16/0x1a [oprofile] [<ffffffff81467b96>] notifier_call_chain+0x37/0x63 [<ffffffff8105803d>] __blocking_notifier_call_chain+0x50/0x67 [<ffffffff81058068>] blocking_notifier_call_chain+0x14/0x16 [<ffffffff8105a718>] profile_task_exit+0x1a/0x1c [<ffffffff81039e8f>] do_exit+0x2a/0x6fc [<ffffffff8103a5e4>] do_group_exit+0x83/0xae [<ffffffff8103a626>] sys_exit_group+0x17/0x1b [<ffffffff8146ad4b>] system_call_fastpath+0x16/0x1b other info that might help us debug this: 1 lock held by oprofiled/4447: #0: ((task_exit_notifier).rwsem){++++..}, at: [<ffffffff81058026>] __blocking_notifier_call_chain+0x39/0x67 stack backtrace: Pid: 4447, comm: oprofiled Not tainted 2.6.39-00007-gcf4d8d4 #10 Call Trace: [<ffffffff81063193>] print_circular_bug+0xae/0xbc [<ffffffff81064dfb>] __lock_acquire+0x1085/0x1711 [<ffffffffa0000e55>] ? sync_buffer+0x31/0x3ec [oprofile] [<ffffffff8106557f>] lock_acquire+0xf8/0x11e [<ffffffffa0000e55>] ? sync_buffer+0x31/0x3ec [oprofile] [<ffffffff81062627>] ? mark_lock+0x42f/0x552 [<ffffffffa0000e55>] ? sync_buffer+0x31/0x3ec [oprofile] [<ffffffff814634f0>] mutex_lock_nested+0x63/0x309 [<ffffffffa0000e55>] ? sync_buffer+0x31/0x3ec [oprofile] [<ffffffffa0000e55>] sync_buffer+0x31/0x3ec [oprofile] [<ffffffff81058026>] ? __blocking_notifier_call_chain+0x39/0x67 [<ffffffff81058026>] ? __blocking_notifier_call_chain+0x39/0x67 [<ffffffffa0001226>] task_exit_notify+0x16/0x1a [oprofile] [<ffffffff81467b96>] notifier_call_chain+0x37/0x63 [<ffffffff8105803d>] __blocking_notifier_call_chain+0x50/0x67 [<ffffffff81058068>] blocking_notifier_call_chain+0x14/0x16 [<ffffffff8105a718>] profile_task_exit+0x1a/0x1c [<ffffffff81039e8f>] do_exit+0x2a/0x6fc [<ffffffff81465031>] ? retint_swapgs+0xe/0x13 [<ffffffff8103a5e4>] do_group_exit+0x83/0xae [<ffffffff8103a626>] sys_exit_group+0x17/0x1b [<ffffffff8146ad4b>] system_call_fastpath+0x16/0x1b Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Carl Love <carll@us.ibm.com> Cc: <stable@kernel.org> # .36+ Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-05-31oprofile: Free potentially owned tasks in case of errorsRobert Richter1-4/+9
After registering the task free notifier we possibly have tasks in our dying_tasks list. Free them after unregistering the notifier in case of an error. Cc: <stable@kernel.org> # .36+ Signed-off-by: Robert Richter <robert.richter@amd.com>