summaryrefslogtreecommitdiff
path: root/drivers/pci/pcie/aer.c
AgeCommit message (Collapse)AuthorFilesLines
2023-11-03Merge tag 'pci-v6.7-changes' of ↵Linus Torvalds1-18/+27
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Use acpi_evaluate_dsm_typed() instead of open-coding _DSM evaluation to learn device characteristics (Andy Shevchenko) - Tidy multi-function header checks using new PCI_HEADER_TYPE_MASK definition (Ilpo Järvinen) - Simplify config access error checking in various drivers (Ilpo Järvinen) - Use pcie_capability_clear_word() (not pcie_capability_clear_and_set_word()) when only clearing (Ilpo Järvinen) - Add pci_get_base_class() to simplify finding devices using base class only (ignoring subclass and programming interface) (Sui Jingfeng) - Add pci_is_vga(), which includes ancient PCI_CLASS_NOT_DEFINED_VGA devices from before the Class Code was added to PCI (Sui Jingfeng) - Use pci_is_vga() for vgaarb, sysfs "boot_vga", virtio, qxl to include ancient VGA devices (Sui Jingfeng) Resource management: - Make pci_assign_unassigned_resources() non-init because sparc uses it after init (Randy Dunlap) Driver binding: - Retain .remove() and .probe() callbacks (previously __init) because sysfs may cause them to be called later (Uwe Kleine-König) - Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device, so it can be claimed by dwc3 instead (Vicki Pfau) PCI device hotplug: - Add Ampere Altra Attention Indicator extension driver for acpiphp (D Scott Phillips) Power management: - Quirk VideoPropulsion Torrent QN16e with longer delay after reset (Lukas Wunner) - Prevent users from overriding drivers that say we shouldn't use D3cold (Lukas Wunner) - Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4 because wakeup interrupts from those states don't work if amd-pmc has put the platform in a hardware sleep state (Mario Limonciello) IOMMU: - Disable ATS for Intel IPU E2000 devices with invalidation message endianness erratum (Bartosz Pawlowski) Error handling: - Factor out interrupt enable/disable into helpers (Kai-Heng Feng) Peer-to-peer DMA: - Fix flexible-array usage in struct pci_p2pdma_pagemap in case we ever use pagemaps with multiple entries (Gustavo A. R. Silva) ASPM: - Revert a change that broke when drivers disabled L1 and users later enabled an L1.x substate via sysfs, and fix a similar issue when users disabled L1 via sysfs (Heiner Kallweit) Endpoint framework: - Fix double free in __pci_epc_create() (Dan Carpenter) - Use IS_ERR_OR_NULL() to simplify endpoint core (Ruan Jinjie) Cadence PCIe controller driver: - Drop unused "is_rc" member (Li Chen) Freescale Layerscape PCIe controller driver: - Enable 64-bit addressing in endpoint mode (Guanhua Gao) Intel VMD host bridge driver: - Fix multi-function header check (Ilpo Järvinen) Microsoft Hyper-V host bridge driver: - Annotate struct hv_dr_state with __counted_by (Kees Cook) NVIDIA Tegra194 PCIe controller driver: - Drop setting of LNKCAP_MLW (max link width) since dw_pcie_setup() already does this via dw_pcie_link_set_max_link_width() (Yoshihiro Shimoda) Qualcomm PCIe controller driver: - Use PCIE_SPEED2MBS_ENC() to simplify encoding of link speed (Manivannan Sadhasivam) - Add a .write_dbi2() callback so DBI2 register writes, e.g., for setting the BAR size, work correctly (Manivannan Sadhasivam) - Enable ASPM for platforms that use 1.9.0 ops, because the PCI core doesn't enable ASPM states that haven't been enabled by the firmware (Manivannan Sadhasivam) Renesas R-Car Gen4 PCIe controller driver: - Add DesignWare core support (set max link width, EDMA_UNROLL flag, .pre_init(), .deinit(), etc) for use by R-Car Gen4 driver (Yoshihiro Shimoda) - Add driver and DT schema for DesignWare-based Renesas R-Car Gen4 controller in both host and endpoint mode (Yoshihiro Shimoda) Xilinx NWL PCIe controller driver: - Update ECAM size to support 256 buses (Thippeswamy Havalige) - Stop setting bridge primary/secondary/subordinate bus numbers, since PCI core does this (Thippeswamy Havalige) Xilinx XDMA controller driver: - Add driver and DT schema for Zynq UltraScale+ MPSoCs devices with Xilinx XDMA Soft IP (Thippeswamy Havalige) Miscellaneous: - Use FIELD_GET()/FIELD_PREP() to simplify and reduce use of _SHIFT macros (Ilpo Järvinen, Bjorn Helgaas) - Remove logic_outb(), _outw(), outl() duplicate declarations (John Sanpe) - Replace unnecessary UTF-8 in Kconfig help text because menuconfig doesn't render it correctly (Liu Song)" * tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (102 commits) PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word() PCI: endpoint: Fix double free in __pci_epc_create() PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge PCI: xilinx-cpm: Move IRQ definitions to a common header PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields PCI: hotplug: Add Ampere Altra Attention Indicator extension driver PCI/AER: Factor out interrupt toggling into helpers PCI: acpiphp: Allow built-in drivers for Attention Indicators PCI/portdrv: Use FIELD_GET() PCI/VC: Use FIELD_GET() PCI/PTM: Use FIELD_GET() PCI/PME: Use FIELD_GET() PCI/ATS: Use FIELD_GET() PCI/ATS: Show PASID Capability register width in bitmasks PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common() ...
2023-10-26Merge branches 'acpi-video', 'acpi-prm', 'acpi-apei' and 'acpi-pcc'Rafael J. Wysocki1-0/+10
Merge ACPI backlight driver updates, ACPI APEI updates, ACPI PRM updates and changes related to ACPI PCC for 6.7-rc1: - Add acpi_backlight=vendor quirk for Toshiba Portégé R100 (Ondrej Zary). - Add "vendor" backlight quirks for 3 Lenovo x86 Android tablets (Hans de Goede). - Move Xiaomi Mi Pad 2 backlight quirk to its own section (Hans de Goede). - Annotate struct prm_module_info with __counted_by (Kees Cook). - Fix AER info corruption in aer_recover_queue() when error status data has multiple sections (Shiju Jose). - Make APEI use ERST max execution time value for slow devices (Jeshua Smith). - Add support for platform notification handling to the PCC mailbox driver and modify it to support shared interrupts for multiple subspaces (Huisong Li). - Define common macros to use when referring to various bitfields in the PCC generic communications channel command and status fields and use them in some drivers (Sudeep Holla). * acpi-video: ACPI: video: Add acpi_backlight=vendor quirk for Toshiba Portégé R100 ACPI: video: Add "vendor" quirks for 3 Lenovo x86 Android tablets ACPI: video: Move Xiaomi Mi Pad 2 quirk to its own section * acpi-prm: ACPI: PRM: Annotate struct prm_module_info with __counted_by * acpi-apei: ACPI: APEI: Use ERST timeout for slow devices ACPI: APEI: Fix AER info corruption when error status data has multiple sections * acpi-pcc: soc: kunpeng_hccs: Migrate to use generic PCC shmem related macros hwmon: (xgene) Migrate to use generic PCC shmem related macros i2c: xgene-slimpro: Migrate to use generic PCC shmem related macros ACPI: PCC: Add PCC shared memory region command and status bitfields mailbox: pcc: Support shared interrupt for multiple subspaces mailbox: pcc: Add support for platform notification handling
2023-10-26PCI/AER: Factor out interrupt toggling into helpersKai-Heng Feng1-18/+27
There are many places that enable and disable AER interrupt, so move them into helpers. Link: https://lore.kernel.org/r/20230512000014.118942-1-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-09-21ACPI: APEI: Fix AER info corruption when error status data has multiple sectionsShiju Jose1-0/+10
ghes_handle_aer() passes AER data to the PCI core for logging and recovery by calling aer_recover_queue() with a pointer to struct aer_capability_regs. The problem was that aer_recover_queue() queues the pointer directly without copying the aer_capability_regs data. The pointer was to the ghes->estatus buffer, which could be reused before aer_recover_work_func() reads the data. To avoid this problem, allocate a new aer_capability_regs structure from the ghes_estatus_pool, copy the AER data from the ghes->estatus buffer into it, pass a pointer to the new struct to aer_recover_queue(), and free it after aer_recover_work_func() has processed it. Reported-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Shiju Jose <shiju.jose@huawei.com> [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-09-12PCI/AER: Export pcie_aer_is_native()Smita Koralahalli1-0/+1
Export and move the declaration of pcie_aer_is_native() to a common header file to be reused by cxl/pci module. Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Robert Richter <rrichter@amd.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20230823234305.27333-3-Smita.KoralahalliChannabasappa@amd.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-08-29Merge branch 'pci/misc'Bjorn Helgaas1-4/+3
- Reorder struct pci_dev to avoid holes and reduce size (Christophe JAILLET) - Change pdev->rom_attr_enabled to single bit since it's only a boolean value (Christophe JAILLET) - Use struct_size() in pirq_convert_irt_table() instead of hand-writing it (Christophe JAILLET) - Explicitly include correct DT includes to untangle headers (Rob Herring) - Fix a DOE race between destroy_work_on_stack() and the stack-allocated task->work struct going out of scope in pci_doe() (Ira Weiny) - Use pci_dev_id() when possible instead of manually composing ID from dev->bus->number and dev->devfn (Xiongfeng Wang, Zheng Zengkai) - Move pci_create_resource_files() declarations to linux/pci.h for alpha build warnings (Arnd Bergmann) - Remove unused hotplug function declarations (Yue Haibing) - Remove unused mvebu struct mvebu_pcie.busn (Pali Rohár) - Unexport pcie_port_bus_type (Bjorn Helgaas) - Remove unnecessary sysfs ID local variable initialization (Bjorn Helgaas) - Fix BAR value printk formatting to accommodate 32-bit values (Bjorn Helgaas) - Use consistent pointer types for config access syscall get_user() and put_user() uses (Bjorn Helgaas) - Simplify AER_RECOVER_RING_SIZE definition (Bjorn Helgaas) - Simplify pci_pio_to_address() (Bjorn Helgaas) - Simplify pci_dev_driver() (Bjorn Helgaas) - Fix pci_bus_resetable(), pci_slot_resetable() name typos (Bjorn Helgaas) - Fix code and doc typos and code formatting (Bjorn Helgaas) - Tidy config space save/restore messages (Bjorn Helgaas) * pci/misc: PCI: Tidy config space save/restore messages PCI: Fix code formatting inconsistencies PCI: Fix typos in docs and comments PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos PCI: Simplify pci_dev_driver() PCI: Simplify pci_pio_to_address() PCI/AER: Simplify AER_RECOVER_RING_SIZE definition PCI: Use consistent put_user() pointer types PCI: Fix printk field formatting PCI: Remove unnecessary initializations PCI: Unexport pcie_port_bus_type PCI: mvebu: Remove unused busn member PCI: Remove unused function declarations PCI/sysfs: Move declarations to linux/pci.h PCI/P2PDMA: Use pci_dev_id() to simplify the code PCI/IOV: Use pci_dev_id() to simplify the code PCI/AER: Use pci_dev_id() to simplify the code PCI: apple: Use pci_dev_id() to simplify the code PCI/DOE: Fix destroy_work_on_stack() race PCI: Explicitly include correct DT includes x86/PCI: Use struct_size() in pirq_convert_irt_table() PCI: Change pdev->rom_attr_enabled to single bit PCI: Reorder pci_dev fields to reduce holes
2023-08-25PCI/AER: Simplify AER_RECOVER_RING_SIZE definitionBjorn Helgaas1-2/+1
ACPI Platform Error Interfaces (APEI) convey error information to the OS. If the APEI GHES driver receives information about PCI errors, it queues it in aer_recover_ring for processing by the PCI AER code. AER_RECOVER_RING_SIZE is the size of the aer_recover_ring FIFO and is arbitrary, with no direct connection to hardware. AER_RECOVER_RING_ORDER was only used to compute AER_RECOVER_RING_SIZE. Remove it and define AER_RECOVER_RING_SIZE directly. No functional change intended. Link: https://lore.kernel.org/r/20230824193712.542167-7-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-08-08PCI/AER: Use pci_dev_id() to simplify the codeXiongfeng Wang1-2/+2
When we have a struct pci_dev *, use pci_dev_id() instead of manually composing the ID with PCI_DEVID() from dev->bus->number and dev->devfn. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20230807134858.116051-3-wangxiongfeng2@huawei.com Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-07-13PCI/AER: Unexport pci_enable_pcie_error_reporting()Bjorn Helgaas1-2/+1
pci_enable_pcie_error_reporting() is used only inside aer.c. Stop exposing it outside the file. Link: https://lore.kernel.org/r/20230710232136.233034-3-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2023-07-13PCI/AER: Drop unused pci_disable_pcie_error_reporting()Bjorn Helgaas1-12/+0
pci_disable_pcie_error_reporting() has no callers. Remove it. Link: https://lore.kernel.org/r/20230710232136.233034-2-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2023-01-27PCI/AER: Remove redundant Device Control Error Reporting EnableBjorn Helgaas1-48/+0
The following bits in the PCIe Device Control register enable sending of ERR_COR, ERR_NONFATAL, or ERR_FATAL Messages (or reporting internally in the case of Root Ports): Correctable Error Reporting Enable Non-Fatal Error Reporting Enable Fatal Error Reporting Enable Unsupported Request Reporting Enable These enable bits are set by pci_enable_pcie_error_reporting(), and since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is native"), we do that in this path during enumeration: pci_init_capabilities pci_aer_init pci_enable_pcie_error_reporting Previously, the AER service driver also traversed the hierarchy when claiming a Root Port, enabling error reporting for downstream devices, but this is redundant. Remove the code that enables this error reporting in the AER .probe() path. Also remove similar code that disables error reporting in the AER .remove() path. Note that these Device Control Reporting Enable bits do not control interrupt generation. That's done by the similarly-named bits in the AER Root Error Command register, which are still set by aer_probe() and cleared by aer_remove(), since the AER service driver handles those interrupts. See PCIe r6.0, sec 6.2.6. Link: https://lore.kernel.org/r/20230118234612.272916-2-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Keith Busch <kbusch@kernel.org>
2023-01-12PCI/AER: Configure ECRC only if AER is nativeVidya Sagar1-0/+3
As the ECRC configuration bits are part of AER registers, configure ECRC only if AER is natively owned by the kernel. Link: https://lore.kernel.org/r/20230112072111.20063-1-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-12-04PCI/AER: Add optional logging callback for correctable errorDave Jiang1-1/+7
Some new devices such as CXL devices may want to record additional error information on a corrected error. Add a callback to allow the PCI device driver to do additional logging such as providing additional stats for user space RAS monitoring. For CXL device, this is actually a need due to CXL needing to write to the CXL RAS capability structure correctable error status register in order to clear the unmasked correctable errors. See CXL spec rev3.0 8.2.4.16. Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/166984619233.2804404.3966368388544312674.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-07-13PCI/AER: Iterate over error counters instead of error stringsMohamed Khalfella1-1/+6
Previously we iterated over AER stat *names*, e.g., aer_correctable_error_string[32], but the actual stat *counters* may not be that large, e.g., pdev->aer_stats->dev_cor_errs[16], which means that we printed junk in the sysfs stats files. Iterate over the stat counter arrays instead of the names to avoid this junk. Also, added a build time check to make sure all counters have entries in strings array. Fixes: 0678e3109a3c ("PCI/AER: Simplify __aer_print_error()") Link: https://lore.kernel.org/r/20220509181441.31884-1-mkhalfella@purestorage.com Reported-by: Meeta Saggi <msaggi@purestorage.com> Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Meeta Saggi <msaggi@purestorage.com> Reviewed-by: Eric Badger <ebadger@purestorage.com> Cc: stable@vger.kernel.org
2022-07-13PCI/AER: Enable error reporting when AER is nativeStefan Roese1-0/+3
If we have native control of AER, set the following error reporting enable bits: - Correctable Error Reporting Enable - Non-Fatal Error Reporting Enable - Fatal Error Reporting Enable - Unsupported Request Reporting Enable Note that these bits are all in the Device Control register and are not AER-specific. This affects all devices with an AER capability, including hot-added devices. Please note that this change is quite invasive, as error reporting now will be enabled for all available PCIe Endpoints, which was previously not the case. When "pci=noaer" is selected, error reporting stays disabled of course. [bhelgaas: commit log, note error reporting is not AER-specific] Link: https://lore.kernel.org/r/20220125071820.2247260-4-sr@denx.de Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pali Rohár <pali@kernel.org> Cc: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Yao Hongbo <yaohongbo@linux.alibaba.com> Cc: Naveen Naidu <naveennaidu479@gmail.com>
2022-07-11PCI/AER: Configure ECRC for every deviceStefan Roese1-3/+2
Move pcie_set_ecrc_checking() to pci_aer_init() to make sure that pcie_set_ecrc_checking() is called for each PCIe device, including hot-added devices. Link: https://lore.kernel.org/r/20220125071820.2247260-2-sr@denx.de Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pali Rohár <pali@kernel.org> Cc: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Yao Hongbo <yaohongbo@linux.alibaba.com> Cc: Naveen Naidu <naveennaidu479@gmail.com>
2022-05-18PCI/AER: Clear MULTI_ERR_COR/UNCOR_RCV bitsKuppuswamy Sathyanarayanan1-1/+6
When a Root Port or Root Complex Event Collector receives an error Message e.g., ERR_COR, it sets PCI_ERR_ROOT_COR_RCV in the Root Error Status register and logs the Requester ID in the Error Source Identification register. If it receives a second ERR_COR Message before software clears PCI_ERR_ROOT_COR_RCV, hardware sets PCI_ERR_ROOT_MULTI_COR_RCV and the Requester ID is lost. In the following scenario, PCI_ERR_ROOT_MULTI_COR_RCV was never cleared: - hardware receives ERR_COR message - hardware sets PCI_ERR_ROOT_COR_RCV - aer_irq() entered - aer_irq(): status = pci_read_config_dword(PCI_ERR_ROOT_STATUS) - aer_irq(): now status == PCI_ERR_ROOT_COR_RCV - hardware receives second ERR_COR message - hardware sets PCI_ERR_ROOT_MULTI_COR_RCV - aer_irq(): pci_write_config_dword(PCI_ERR_ROOT_STATUS, status) - PCI_ERR_ROOT_COR_RCV is cleared; PCI_ERR_ROOT_MULTI_COR_RCV is set - aer_irq() entered again - aer_irq(): status = pci_read_config_dword(PCI_ERR_ROOT_STATUS) - aer_irq(): now status == PCI_ERR_ROOT_MULTI_COR_RCV - aer_irq() exits because PCI_ERR_ROOT_COR_RCV not set - PCI_ERR_ROOT_MULTI_COR_RCV is still set The same problem occurred with ERR_NONFATAL/ERR_FATAL Messages and PCI_ERR_ROOT_UNCOR_RCV and PCI_ERR_ROOT_MULTI_UNCOR_RCV. Fix the problem by queueing an AER event and clearing the Root Error Status bits when any of these bits are set: PCI_ERR_ROOT_COR_RCV PCI_ERR_ROOT_UNCOR_RCV PCI_ERR_ROOT_MULTI_COR_RCV PCI_ERR_ROOT_MULTI_UNCOR_RCV See the bugzilla link for details from Eric about how to reproduce this problem. [bhelgaas: commit log, move repro details to bugzilla] Fixes: e167bfcaa4cd ("PCI: aerdrv: remove magical ROOT_ERR_STATUS_MASKS") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215992 Link: https://lore.kernel.org/r/20220418150237.1021519-1-sathyanarayanan.kuppuswamy@linux.intel.com Reported-by: Eric Badger <ebadger@purestorage.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Ashok Raj <ashok.raj@intel.com>
2021-10-09PCI: Correct misspelled and remove duplicated wordsKrzysztof Wilczyński1-1/+1
Correct a number of misspelled words and remove any words that were duplicated in the PCI tree. No change to functionality intended. Link: https://lore.kernel.org/r/20211006233827.147328-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-19PCI: Change the type of probe argument in reset functionsAmey Narkhede1-1/+1
Change the type of probe argument in functions which implement reset methods from int to bool to make the context and intent clear. Suggested-by: Alex Williamson <alex.williamson@redhat.com> Link: https://lore.kernel.org/r/20210817180500.1253-10-ameynarkhede03@gmail.com Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-17PCI: Add pcie_reset_flr() with 'probe' argumentAmey Narkhede1-7/+5
Most reset methods are of the form "pci_*_reset(dev, probe)". pcie_flr() was an exception because it relied on a separate pcie_has_flr() function instead of taking a "probe" argument. Add "pcie_reset_flr(dev, probe)" to follow the convention. Remove pcie_has_flr(). Some pcie_flr() callers that did not use pcie_has_flr() remain. [bhelgaas: commit log, rework pcie_reset_flr() to use dev->devcap directly] Link: https://lore.kernel.org/r/20210817180500.1253-3-ameynarkhede03@gmail.com Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
2021-07-06Merge branch 'pci/sysfs'Bjorn Helgaas1-9/+11
- Fix dsm_label_utf16s_to_utf8s() buffer overrun (Krzysztof Wilczyński) - Use sysfs_emit() and sysfs_emit_at() in "show" functions (Krzysztof Wilczyński) - Fix 'resource_alignment' newline issues (Krzysztof Wilczyński) - Add newline to 'devspec' sysfs file (Krzysztof Wilczyński) * pci/sysfs: PCI/sysfs: Add 'devspec' newline PCI/sysfs: Fix 'resource_alignment' newline issues PCI/sysfs: Use sysfs_emit() and sysfs_emit_at() in "show" functions PCI/sysfs: Rely on lengths from scnprintf(), dsm_label_utf16s_to_utf8s() PCI/sysfs: Fix dsm_label_utf16s_to_utf8s() buffer overrun # Conflicts: # drivers/pci/p2pdma.c
2021-06-04PCI/sysfs: Use sysfs_emit() and sysfs_emit_at() in "show" functionsKrzysztof Wilczyński1-9/+11
The sysfs_emit() and sysfs_emit_at() functions were introduced to make it less ambiguous which function is preferred when writing to the output buffer in a device attribute's "show" callback [1]. Convert the PCI sysfs object "show" functions from sprintf(), snprintf() and scnprintf() to sysfs_emit() and sysfs_emit_at() accordingly, as the latter is aware of the PAGE_SIZE buffer and correctly returns the number of bytes written into the buffer. No functional change intended. [1] Documentation/filesystems/sysfs.rst Related commit: ad025f8e46f3 ("PCI/sysfs: Use sysfs_emit() and sysfs_emit_at() in "show" functions"). Link: https://lore.kernel.org/r/20210603000112.703037-2-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2021-05-28PCI/AER: Use consistent format when printing PCI deviceYicong Yang1-2/+2
We use format domain:bus:slot.function when printing PCI device. Use consistent format in AER messages. [bhelgaas: also drop "AER recover:" prefix since we already have an "AER:" prefix from pr_fmt()] Link: https://lore.kernel.org/r/1617015721-51701-1-git-send-email-yangyicong@hisilicon.com Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2021-03-12PCI: Fix kernel-doc errorsKrzysztof Wilczyński1-3/+3
Fix kernel-doc formatting errors, function names that don't match the doc, and some missing parameter documentation. These are reported by: make W=1 drivers/pci/ No functional change intended. [bhelgaas: squashed into one patch since this only changes comments] Link: https://lore.kernel.org/r/20210311001724.423356-1-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-2-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-3-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-4-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-5-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-6-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-7-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-8-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-02-24PCI/AER: Specify the type of Port that was resetKeith Busch1-1/+2
The AER driver may be called upon to reset either a Downstream or a Root Port. Check which type it is to properly identify it when logging that the reset occurred. Link: https://lore.kernel.org/r/20210104230300.1277180-5-kbusch@kernel.org Tested-by: Hedi Berriche <hedi.berriche@hpe.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Hedi Berriche <hedi.berriche@hpe.com>
2021-02-24PCI/AER: Clear AER status from Root Port when resetting Downstream PortKeith Busch1-1/+1
The pci_dev parameter given to aer_root_reset() may be a Downstream Port rather than the Root Port. Get the Root Port from the provided device in order to clear the root's AER status. Link: https://lore.kernel.org/r/20210104230300.1277180-3-kbusch@kernel.org Tested-by: Hedi Berriche <hedi.berriche@hpe.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sean V Kelley <sean.v.kelley@intel.com> Acked-by: Hedi Berriche <hedi.berriche@hpe.com>
2020-12-06PCI/AER: Add pcie_walk_rcec() to RCEC AER handlingSean V Kelley1-4/+11
Root Complex Event Collectors (RCEC) appear as peers to Root Ports and also have the AER capability. In addition, actions need to be taken for associated RCiEPs. In such cases the RCECs will need to be walked in order to find and act upon their respective RCiEPs. Extend the existing ability to link the RCECs with a walking function pcie_walk_rcec(). Add RCEC support to the current AER service driver and attach the AER service driver to the RCEC device. Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Link: https://lore.kernel.org/r/20201121001036.8560-14-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2020-12-06PCI/ERR: Recover from RCiEP AER errorsQiuxu Zhuo1-5/+19
Add support for handling AER errors detected by Root Complex Integrated Endpoints (RCiEPs). These errors are signaled to software natively via a Root Complex Event Collector (RCEC) or non-natively via ACPI APEI if the platform retains control of AER or uses a non-standard RCEC-like device. When recovering from RCiEP errors, the Root Error Command and Status registers are in the AER Capability of an associated RCEC (if any), not in a Root Port. In the non-native case, the platform is responsible for those registers and we can't touch them. [bhelgaas: commit log, etc] Co-developed-by: Sean V Kelley <sean.v.kelley@intel.com> Link: https://lore.kernel.org/r/20201121001036.8560-13-sean.v.kelley@intel.com Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-06PCI/ERR: Recover from RCEC AER errorsSean V Kelley1-17/+41
A Root Complex Event Collector (RCEC) collects and signals AER errors that were detected by Root Complex Integrated Endpoints (RCiEPs), but it may also signal errors it detects itself. This is analogous to errors detected and signaled by a Root Port. Update the AER service driver to claim RCECs in addition to Root Ports. Add support for handling RCEC-detected AER errors. This does not include handling RCiEP-detected errors that are signaled by the RCEC. Note that we expect these errors only from the native AER and APEI paths, not from DPC or EDR. [bhelgaas: split from combined RCEC/RCiEP patch, commit log] Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-04PCI/ERR: Simplify by computing pci_pcie_type() onceSean V Kelley1-2/+3
Instead of calling pci_pcie_type(dev) twice, call it once and save the result. No functional change intended. Link: https://lore.kernel.org/r/20201121001036.8560-7-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-12-02PCI/AER: Write AER Capability only when we control itSean V Kelley1-13/+16
If an OS has not been granted AER control via _OSC, it should not make changes to PCI_ERR_ROOT_COMMAND and PCI_ERR_ROOT_STATUS related registers. Per section 4.5.1 of the System Firmware Intermediary (SFI) _OSC and DPC Updates ECN [1], this bit also covers these aspects of the PCI Express Advanced Error Reporting. Based on the above and earlier discussion [2], make the following changes: Add a check for the native case (i.e., AER control via _OSC) Note that the previous "clear, reset, enable" order suggests that the reset might cause errors that we should ignore. After this commit, those errors (if any) will remain logged in the PCI_ERR_ROOT_STATUS register. [1] System Firmware Intermediary (SFI) _OSC and DPC Updates ECN, Feb 24, 2020, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/14076 [2] https://lore.kernel.org/linux-pci/20201020162820.GA370938@bjorn-Precision-5520/ Link: https://lore.kernel.org/r/20201121001036.8560-2-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-08-08Merge tag 'pci-v5.9-changes' of ↵Linus Torvalds1-32/+55
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Fix pci_cfg_wait queue locking problem (Bjorn Helgaas) - Convert PCIe capability PCIBIOS errors to errno (Bolarinwa Olayemi Saheed) - Align PCIe capability and PCI accessor return values (Bolarinwa Olayemi Saheed) - Fix pci_create_slot() reference count leak (Qiushi Wu) - Announce device after early fixups (Tiezhu Yang) PCI device hotplug: - Make rpadlpar functions static (Wei Yongjun) Driver binding: - Add device even if driver attach failed (Rajat Jain) Virtualization: - xen: Remove redundant initialization of irq (Colin Ian King) IOMMU: - Add pci_pri_supported() to check device or associated PF (Ashok Raj) - Release IVRS table in AMD ACS quirk (Hanjun Guo) - Mark AMD Navi10 GPU rev 0x00 ATS as broken (Kai-Heng Feng) - Treat "external-facing" devices themselves as internal (Rajat Jain) MSI: - Forward MSI-X error code in pci_alloc_irq_vectors_affinity() (Piotr Stankiewicz) Error handling: - Clear PCIe Device Status errors only if OS owns AER (Jonathan Cameron) - Log correctable errors as warning, not error (Matt Jolly) - Use 'pci_channel_state_t' instead of 'enum pci_channel_state' (Luc Van Oostenryck) Peer-to-peer DMA: - Allow P2PDMA on AMD Zen and newer CPUs (Logan Gunthorpe) ASPM: - Add missing newline in sysfs 'policy' (Xiongfeng Wang) Native PCIe controllers: - Convert to devm_platform_ioremap_resource_byname() (Dejin Zheng) - Convert to devm_platform_ioremap_resource() (Dejin Zheng) - Remove duplicate error message from devm_pci_remap_cfg_resource() callers (Dejin Zheng) - Fix runtime PM imbalance on error (Dinghao Liu) - Remove dev_err() when handing an error from platform_get_irq() (Krzysztof Wilczyński) - Use pci_host_bridge.windows list directly instead of splicing in a temporary list for cadence, mvebu, host-common (Rob Herring) - Use pci_host_probe() instead of open-coding all the pieces for altera, brcmstb, iproc, mobiveil, rcar, rockchip, tegra, v3, versatile, xgene, xilinx, xilinx-nwl (Rob Herring) - Default host bridge parent device to the platform device (Rob Herring) - Use pci_is_root_bus() instead of tracking root bus number separately in aardvark, designware (imx6, keystone, designware-host), mobiveil, xilinx-nwl, xilinx, rockchip, rcar (Rob Herring) - Set host bridge bus number in pci_scan_root_bus_bridge() instead of each driver for aardvark, designware-host, host-common, mediatek, rcar, tegra, v3-semi (Rob Herring) - Move DT resource setup into devm_pci_alloc_host_bridge() (Rob Herring) - Set bridge map_irq and swizzle_irq to default functions; drivers that don't support legacy IRQs (iproc) need to undo this (Rob Herring) ARM Versatile PCIe controller driver: - Drop flag PCI_ENABLE_PROC_DOMAINS (Rob Herring) Cadence PCIe controller driver: - Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property (Kishon Vijay Abraham I) - Remove "mem" from reg binding (Kishon Vijay Abraham I) - Fix cdns_pcie_{host|ep}_setup() error path (Kishon Vijay Abraham I) - Convert all r/w accessors to perform only 32-bit accesses (Kishon Vijay Abraham I) - Add support to start link and verify link status (Kishon Vijay Abraham I) - Allow pci_host_bridge to have custom pci_ops (Kishon Vijay Abraham I) - Add new *ops* for CPU addr fixup (Kishon Vijay Abraham I) - Fix updating Vendor ID and Subsystem Vendor ID register (Kishon Vijay Abraham I) - Use bridge resources for outbound window setup (Rob Herring) - Remove private bus number and range storage (Rob Herring) Cadence PCIe endpoint driver: - Add MSI-X support (Alan Douglas) HiSilicon PCIe controller driver: - Remove non-ECAM HiSilicon hip05/hip06 driver (Rob Herring) Intel VMD host bridge driver: - Use Shadow MEMBAR registers for QEMU/KVM guests (Jon Derrick) Loongson PCIe controller driver: - Use DECLARE_PCI_FIXUP_EARLY for bridge_class_quirk() (Tiezhu Yang) Marvell Aardvark PCIe controller driver: - Indicate error in 'val' when config read fails (Pali Rohár) - Don't touch PCIe registers if no card connected (Pali Rohár) Marvell MVEBU PCIe controller driver: - Setup BAR0 in order to fix MSI (Shmuel Hazan) Microsoft Hyper-V host bridge driver: - Fix a timing issue which causes kdump to fail occasionally (Wei Hu) - Make some functions static (Wei Yongjun) NVIDIA Tegra PCIe controller driver: - Revert tegra124 raw_violation_fixup (Nicolas Chauvet) - Remove PLL power supplies (Thierry Reding) Qualcomm PCIe controller driver: - Change duplicate PCI reset to phy reset (Abhishek Sahu) - Add missing ipq806x clocks in PCIe driver (Ansuel Smith) - Add missing reset for ipq806x (Ansuel Smith) - Add ext reset (Ansuel Smith) - Use bulk clk API and assert on error (Ansuel Smith) - Add support for tx term offset for rev 2.1.0 (Ansuel Smith) - Define some PARF params needed for ipq8064 SoC (Ansuel Smith) - Add ipq8064 rev2 variant (Ansuel Smith) - Support PCI speed set for ipq806x (Sham Muthayyan) Renesas R-Car PCIe controller driver: - Use devm_pci_alloc_host_bridge() (Rob Herring) - Use struct pci_host_bridge.windows list directly (Rob Herring) - Convert rcar-gen2 to use modern host bridge probe functions (Rob Herring) TI J721E PCIe driver: - Add TI J721E PCIe host and endpoint driver (Kishon Vijay Abraham I) Xilinx Versal CPM PCIe controller driver: - Add Versal CPM Root Port driver and YAML schema (Bharat Kumar Gogada) MicroSemi Switchtec management driver: - Add missing __iomem and __user tags to fix sparse warnings (Logan Gunthorpe) Miscellaneous: - Replace http:// links with https:// (Alexander A. Klimov) - Replace lkml.org, spinics, gmane with lore.kernel.org (Bjorn Helgaas) - Remove unused pci_lost_interrupt() (Heiner Kallweit) - Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h (Huacai Chen) - Fix kerneldoc warnings (Krzysztof Kozlowski)" * tag 'pci-v5.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits) PCI: Fix kerneldoc warnings PCI: xilinx-cpm: Add Versal CPM Root Port driver PCI: xilinx-cpm: Add YAML schemas for Versal CPM Root Port PCI: Set bridge map_irq and swizzle_irq to default functions PCI: Move DT resource setup into devm_pci_alloc_host_bridge() PCI: rcar-gen2: Convert to use modern host bridge probe functions PCI: Remove dev_err() when handing an error from platform_get_irq() MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe misc: pci_endpoint_test: Add J721E in pci_device_id table PCI: j721e: Add TI J721E PCIe driver PCI: switchtec: Add missing __iomem tag to fix sparse warnings PCI: switchtec: Add missing __iomem and __user tags to fix sparse warnings PCI: rpadlpar: Make functions static PCI/P2PDMA: Allow P2PDMA on AMD Zen and newer CPUs PCI: Release IVRS table in AMD ACS quirk PCI: Announce device after early fixups PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken PCI: Remove unused pci_lost_interrupt() dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC ...
2020-08-06Merge branch 'pci/misc'Bjorn Helgaas1-3/+8
- Convert PCIe capability PCIBIOS errors to errno (Bolarinwa Olayemi Saheed) - Align PCIe capability and PCI accessor return values (Bolarinwa Olayemi Saheed) - Replace http:// links with https:// (Alexander A. Klimov) - Replace lkml.org, spinics, gmane with lore.kernel.org (Bjorn Helgaas) - Update panic message to mention kzalloc(), not kmalloc() (Liao Pingfang) - Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h (Huacai Chen) - Remove unused pci_lost_interrupt() (Heiner Kallweit) * pci/misc: PCI: Remove unused pci_lost_interrupt() PCI: Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h PCI: Fix error in panic message PCI: Replace lkml.org, spinics, gmane with lore.kernel.org PCI: Replace http:// links with https:// PCI: Align PCIe capability and PCI accessor return values PCI: Convert PCIe capability PCIBIOS errors to errno
2020-07-22PCI/ERR: Clear PCIe Device Status errors only if OS owns AERJonathan Cameron1-1/+2
pcie_clear_device_status() resets the error bits in the PCIe Device Status Register (PCI_EXP_DEVSTA). Previously we did this unconditionally, but on ACPI systems, the _OSC AER bit negotiates control of the AER capability. Per sec 4.5.1 of the System Firmware Intermediary _OSC and DPC Updates ECN [1], this bit also covers other error enable/status bits including the following: Correctable Error Reporting Enable Non-Fatal Error Reporting Enable Fatal Error Reporting Enable Unsupported Request Reporting Enable These bits are all in the PCIe Device Control register (the ECN omitted "Reporting", but I think that's a typo), so by implication the _OSC AER bit also applies to the error status bits in the PCIe Device Status register: Correctable Error Detected Non-Fatal Error Detected Fatal Error Detected Unsupported Request Detected Clear the PCIe Device Status error bits only when the OS controls the AER capability and related error enable/status bits. If platform firmware controls the AER capability, firmware is responsible for clearing these bits. One call path leading here is: ghes_do_proc ghes_handle_aer aer_recover_queue schedule_work(&aer_recover_work) ... aer_recover_work_func pcie_do_recovery pcie_clear_device_status [1] System Firmware Intermediary (SFI) _OSC and DPC Updates ECN, Feb 24, 2020, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/14076 [bhelgaas: commit log, move test from pcie_clear_device_status() to callers] Link: https://lore.kernel.org/r/20200622113523.891666-1-Jonathan.Cameron@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-22PCI/ERR: Rename pci_aer_clear_device_status() to pcie_clear_device_status()Bjorn Helgaas1-9/+1
pci_aer_clear_device_status() clears the error bits in the PCIe Device Status Register (PCI_EXP_DEVSTA). Every PCIe device has this register, regardless of whether it supports AER. Rename pci_aer_clear_device_status() to pcie_clear_device_status() to make clear that it is PCIe-specific but not AER-specific. Move it to drivers/pci/pci.c, again since it's not AER-specific. No functional change intended. Link: https://lore.kernel.org/r/20200717195619.766662-1-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-16treewide: Remove uninitialized_var() usageKees Cook1-1/+1
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-08PCI/AER: Log correctable errors as warning, not errorMatt Jolly1-10/+15
PCIe correctable errors are recovered by hardware with no need for software intervention (PCIe r5.0, sec 6.2.2.1). Reduce the log level of correctable errors from KERN_ERR to KERN_WARNING. The bug reports below are for correctable error logging. This doesn't fix the cause of those reports, but it may make the messages less alarming. [bhelgaas: commit log, use pci_printk() to avoid code duplication] Link: https://bugzilla.kernel.org/show_bug.cgi?id=201517 Link: https://bugzilla.kernel.org/show_bug.cgi?id=196183 Link: https://lore.kernel.org/r/20200618155511.16009-1-Kangie@footclan.ninja Signed-off-by: Matt Jolly <Kangie@footclan.ninja> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-08PCI/AER: Simplify __aer_print_error()Bjorn Helgaas1-14/+34
aer_correctable_error_string[] and aer_uncorrectable_error_string[] have descriptions of AER error status bits. Add NULL entries to these tables so all entries for bits 0-31 are defined. Then we don't have to check for ARRAY_SIZE() when decoding a status word, which simplifies __aer_print_error(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-06-26PCI: Convert PCIe capability PCIBIOS errors to errnoBolarinwa Olayemi Saheed1-3/+8
The PCI config accessors (pci_read_config_word(), et al) return PCIBIOS_SUCCESSFUL (zero) or positive error values like PCIBIOS_FUNC_NOT_SUPPORTED. The PCIe capability accessors (pcie_capability_read_word(), et al) similarly return PCIBIOS errors, but some callers assume they return generic errno values like -EINVAL. For example, the Myri-10G probe function returns a positive PCIBIOS error if the pcie_capability_clear_and_set_word() in pcie_set_readrq() fails: myri10ge_probe status = pcie_set_readrq return pcie_capability_clear_and_set_word if (status) return status A positive return from a PCI driver probe function would cause a "Driver probe function unexpectedly returned" warning from local_pci_probe() instead of the desired probe failure. Convert PCIBIOS errors to generic errno for all callers of: pcie_capability_read_word pcie_capability_read_dword pcie_capability_write_word pcie_capability_write_dword pcie_capability_set_word pcie_capability_set_dword pcie_capability_clear_word pcie_capability_clear_dword pcie_capability_clear_and_set_word pcie_capability_clear_and_set_dword that check the return code for anything other than zero. [bhelgaas: commit log, squash together] Suggested-by: Bjorn Helgaas <bjorn@helgaas.com> Link: https://lore.kernel.org/r/20200615073225.24061-1-refactormyself@gmail.com Signed-off-by: Bolarinwa Olayemi Saheed <refactormyself@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-06-01PCI/AER: Use "aer" variable for capability offsetBjorn Helgaas1-95/+84
Previously we used "pos" or "aer_pos" for the offset of the AER Capability. Use "aer" consistently and initialize it the same way everywhere. No functional change intended. Link: https://lore.kernel.org/r/20200529230915.GA479883@bjorn-Precision-5520 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2020-06-01PCI/AER: Remove redundant dev->aer_cap checksKuppuswamy Sathyanarayanan1-10/+2
pcie_aer_get_firmware_first() checks dev->aer_cap, so we can remove redundant dev->aer_cap checks in the callers. Link: https://lore.kernel.org/r/d5ccc7a060ec9cdc234bdae7df8a0a4410f13f42.1590534843.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-06-01PCI/AER: Remove redundant pci_is_pcie() checksKuppuswamy Sathyanarayanan1-9/+0
AER is a PCIe Extended Capability, so dev->aer_cap will only be set for PCIe devices. Remove redundant pci_is_pcie() checks. Link: https://lore.kernel.org/r/361c622eabe5b845b8092e0bec04a3a2c262cb38.1590534843.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-06-01PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownershipKuppuswamy Sathyanarayanan1-107/+11
Commit c100beb9ccfb ("PCI/AER: Use only _OSC to determine AER ownership") removed the use of HEST in determining AER ownership, but the AER driver still used HEST to verify AER ownership in some of its APIs. Per the ACPI spec v6.3, sec 18.3.2.4, some HEST table entries contain a FIRMWARE_FIRST bit, but that bit does not tell us anything about ownership of the AER capability. Remove parsing of HEST to look for FIRMWARE_FIRST. Add pcie_aer_is_native() for the places that need to know whether the OS owns the AER capability. [bhelgaas: commit log, reorder patch, remove unused __aer_firmware_first] Link: https://lore.kernel.org/r/9a37f53a4e6ff4942ff8e18dbb20b00e16c47341.1590534843.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-05-01PCI/AER: Use only _OSC to determine AER ownershipAlexandru Gagniuc1-25/+1
Per the PCI Firmware spec, r3.2, sec 4.5.1, the OS can request control of AER via bit 3 of the _OSC Control Field. In the returned value of the Control Field: The firmware sets [bit 3] to 1 to grant control over PCI Express Advanced Error Reporting. ... after control is transferred to the operating system, firmware must not modify the Advanced Error Reporting Capability. If control of this feature was requested and denied or was not requested, firmware returns this bit set to 0. Previously the pci_root driver looked at the HEST FIRMWARE_FIRST bit to determine whether to request ownership of the AER Capability. This was based on ACPI spec v6.3, sec 18.3.2.4, and similar sections, which say things like: Bit [0] - FIRMWARE_FIRST: If set, indicates that system firmware will handle errors from this source first. Bit [1] - GLOBAL: If set, indicates that the settings contained in this structure apply globally to all PCI Express Devices. These ACPI references don't say anything about ownership of the AER Capability. Remove use of the FIRMWARE_FIRST bit and rely only on the _OSC bit to determine whether we have control of the AER Capability. Link: https://lore.kernel.org/r/20181115231605.24352-1-mr.nuke.me@gmail.com/ v1 Link: https://lore.kernel.org/r/20190326172343.28946-1-mr.nuke.me@gmail.com/ v2 Link: https://lore.kernel.org/r/67af2931705bed9a588b5a39d369cb70b9942190.1587925636.git.sathyanarayanan.kuppuswamy@linux.intel.com [bhelgaas: commit log, note: Alex posted this identical patch 18 months ago, and I failed to apply it then, so I made him the author, added links to his postings, and added his Signed-off-by] Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
2020-03-28PCI/AER: Rationalize error status register clearingKuppuswamy Sathyanarayanan1-4/+4
The AER interfaces to clear error status registers were a confusing mess: - pci_cleanup_aer_uncorrect_error_status() cleared non-fatal errors from the Uncorrectable Error Status register. - pci_aer_clear_fatal_status() cleared fatal errors from the Uncorrectable Error Status register. - pci_cleanup_aer_error_status_regs() cleared the Root Error Status register (for Root Ports), the Uncorrectable Error Status register, and the Correctable Error Status register. Rename them to make them consistent: From To ---------------------------------------- ------------------------------- pci_cleanup_aer_uncorrect_error_status() pci_aer_clear_nonfatal_status() pci_aer_clear_fatal_status() pci_aer_clear_fatal_status() pci_cleanup_aer_error_status_regs() pci_aer_clear_status() Since pci_cleanup_aer_error_status_regs() (renamed to pci_aer_clear_status()) is only used within drivers/pci/, move the declaration from <linux/aer.h> to drivers/pci/pci.h. [bhelgaas: commit log, add renames] Link: https://lore.kernel.org/r/d1310a75dc3d28f7e8da4e99c45fbd3e60fe238e.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/AER: Add pci_aer_raw_clear_status() to unconditionally clear Error StatusKuppuswamy Sathyanarayanan1-4/+18
Per the SFI _OSC and DPC Updates ECN [1] implementation note flowchart, the OS seems to be expected to clear AER status even if it doesn't have ownership of the AER capability. Unlike the DPC capability, where a DPC ECN [2] specifies a window when the OS is allowed to access DPC registers even if it doesn't have ownership, there is no clear model for AER. Add pci_aer_raw_clear_status() to clear the AER error status registers unconditionally. This is intended for use only by the EDR path (see [2]). [1] System Firmware Intermediary (SFI) _OSC and DPC Updates ECN, Feb 24, 2020, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/14076 [2] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/12888 [bhelgaas: changelog] Link: https://lore.kernel.org/r/c19ad28f3633cce67448609e89a75635da0da07d.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/ERR: Remove service dependency in pcie_do_recovery()Kuppuswamy Sathyanarayanan1-7/+5
Previously we passed the PCIe service type parameter to pcie_do_recovery(), where reset_link() looked up the underlying pci_port_service_driver and its .reset_link() function pointer. Instead of using this roundabout way, we can just pass the driver-specific .reset_link() callback function when calling pcie_do_recovery() function. This allows us to call pcie_do_recovery() from code that is not a PCIe port service driver, e.g., Error Disconnect Recover (EDR) support. Remove pcie_port_find_service() and pcie_port_service_driver.reset_link since they are now unused. Link: https://lore.kernel.org/r/60e02b87b526cdf2930400059d98704bf0a147d1.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-24PCI/AER: Initialize aer_fifoDongdong Liu1-0/+1
Previously we did not call INIT_KFIFO() for aer_fifo. This leads to kfifo_put() sometimes returning 0 (queue full) when in fact it is not. It is easy to reproduce the problem by using aer-inject: $ aer-inject -s :82:00.0 multiple-corr-nonfatal The content of the multiple-corr-nonfatal file is as below: AER COR RCVR HL 0 1 2 3 AER UNCOR POISON_TLP HL 4 5 6 7 Fixes: 27c1ce8bbed7 ("PCI/AER: Use kfifo for tracking events instead of reimplementing it") Link: https://lore.kernel.org/r/1579767991-103898-1-git-send-email-liudongdong3@huawei.com Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-10-19PCI/AER: Fix kernel-doc warningsAndy Shevchenko1-1/+3
Kernel-doc validator complains: aer.c:207: warning: Function parameter or member 'str' not described in 'pcie_ecrc_get_policy' aer.c:1209: warning: Function parameter or member 'irq' not described in 'aer_isr' aer.c:1209: warning: Function parameter or member 'context' not described in 'aer_isr' aer.c:1209: warning: Excess function parameter 'work' description in 'aer_isr' Fix the above accordingly. Link: https://lore.kernel.org/r/20190827151823.75312-2-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2019-10-19PCI/AER: Use for_each_set_bit() to simplify codeAndy Shevchenko1-11/+8
Simplify error counting code by using for_each_set_bit() library function. Link: https://lore.kernel.org/r/20190827151823.75312-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-04 04:38:26 +0300