summaryrefslogtreecommitdiff
path: root/drivers/pci/pcie/err.c
AgeCommit message (Collapse)AuthorFilesLines
2020-07-22PCI/ERR: Clear PCIe Device Status errors only if OS owns AERJonathan Cameron1-1/+2
pcie_clear_device_status() resets the error bits in the PCIe Device Status Register (PCI_EXP_DEVSTA). Previously we did this unconditionally, but on ACPI systems, the _OSC AER bit negotiates control of the AER capability. Per sec 4.5.1 of the System Firmware Intermediary _OSC and DPC Updates ECN [1], this bit also covers other error enable/status bits including the following: Correctable Error Reporting Enable Non-Fatal Error Reporting Enable Fatal Error Reporting Enable Unsupported Request Reporting Enable These bits are all in the PCIe Device Control register (the ECN omitted "Reporting", but I think that's a typo), so by implication the _OSC AER bit also applies to the error status bits in the PCIe Device Status register: Correctable Error Detected Non-Fatal Error Detected Fatal Error Detected Unsupported Request Detected Clear the PCIe Device Status error bits only when the OS controls the AER capability and related error enable/status bits. If platform firmware controls the AER capability, firmware is responsible for clearing these bits. One call path leading here is: ghes_do_proc ghes_handle_aer aer_recover_queue schedule_work(&aer_recover_work) ... aer_recover_work_func pcie_do_recovery pcie_clear_device_status [1] System Firmware Intermediary (SFI) _OSC and DPC Updates ECN, Feb 24, 2020, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/14076 [bhelgaas: commit log, move test from pcie_clear_device_status() to callers] Link: https://lore.kernel.org/r/20200622113523.891666-1-Jonathan.Cameron@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-22PCI/ERR: Rename pci_aer_clear_device_status() to pcie_clear_device_status()Bjorn Helgaas1-1/+1
pci_aer_clear_device_status() clears the error bits in the PCIe Device Status Register (PCI_EXP_DEVSTA). Every PCIe device has this register, regardless of whether it supports AER. Rename pci_aer_clear_device_status() to pcie_clear_device_status() to make clear that it is PCIe-specific but not AER-specific. Move it to drivers/pci/pci.c, again since it's not AER-specific. No functional change intended. Link: https://lore.kernel.org/r/20200717195619.766662-1-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-08PCI: Use 'pci_channel_state_t' instead of 'enum pci_channel_state'Luc Van Oostenryck1-2/+2
The method struct pci_error_handlers.error_detected() is defined and documented as taking an 'enum pci_channel_state' for the second argument, but most drivers use 'pci_channel_state_t' instead. This 'pci_channel_state_t' is not a typedef for the enum but a typedef for a bitwise type in order to have better/stricter typechecking. Consolidate everything by using 'pci_channel_state_t' in the method's definition, in the related helpers and in the drivers. Enforce use of 'pci_channel_state_t' by replacing 'enum pci_channel_state' with an anonymous 'enum'. Note: Currently, from a typechecking point of view this patch changes nothing because only the constants defined by the enum are bitwise, not the enum itself (sparse doesn't have the notion of 'bitwise enum'). This may change in some not too far future, hence the patch. [bhelgaas: squash in https://lore.kernel.org/r/20200702162651.49526-3-luc.vanoostenryck@gmail.com https://lore.kernel.org/r/20200702162651.49526-4-luc.vanoostenryck@gmail.com] Link: https://lore.kernel.org/r/20200702162651.49526-2-luc.vanoostenryck@gmail.com Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/AER: Rationalize error status register clearingKuppuswamy Sathyanarayanan1-1/+1
The AER interfaces to clear error status registers were a confusing mess: - pci_cleanup_aer_uncorrect_error_status() cleared non-fatal errors from the Uncorrectable Error Status register. - pci_aer_clear_fatal_status() cleared fatal errors from the Uncorrectable Error Status register. - pci_cleanup_aer_error_status_regs() cleared the Root Error Status register (for Root Ports), the Uncorrectable Error Status register, and the Correctable Error Status register. Rename them to make them consistent: From To ---------------------------------------- ------------------------------- pci_cleanup_aer_uncorrect_error_status() pci_aer_clear_nonfatal_status() pci_aer_clear_fatal_status() pci_aer_clear_fatal_status() pci_cleanup_aer_error_status_regs() pci_aer_clear_status() Since pci_cleanup_aer_error_status_regs() (renamed to pci_aer_clear_status()) is only used within drivers/pci/, move the declaration from <linux/aer.h> to drivers/pci/pci.h. [bhelgaas: commit log, add renames] Link: https://lore.kernel.org/r/d1310a75dc3d28f7e8da4e99c45fbd3e60fe238e.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/ERR: Return status of pcie_do_recovery()Kuppuswamy Sathyanarayanan1-4/+6
As per the DPC Enhancements ECN [1], sec 4.5.1, table 4-4, if the OS supports Error Disconnect Recover (EDR), it must invalidate the software state associated with child devices of the port without attempting to access the child device hardware. In addition, if the OS supports DPC, it must attempt to recover the child devices if the port implements the DPC Capability. If the OS continues operation, the OS must inform the firmware of the status of the recovery operation via the _OST method. Return the result of pcie_do_recovery() so we can report it to firmware via _OST. [1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/12888 Link: https://lore.kernel.org/r/eb60ec89448769349c6722954ffbf2de163155b5.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/ERR: Remove service dependency in pcie_do_recovery()Kuppuswamy Sathyanarayanan1-45/+7
Previously we passed the PCIe service type parameter to pcie_do_recovery(), where reset_link() looked up the underlying pci_port_service_driver and its .reset_link() function pointer. Instead of using this roundabout way, we can just pass the driver-specific .reset_link() callback function when calling pcie_do_recovery() function. This allows us to call pcie_do_recovery() from code that is not a PCIe port service driver, e.g., Error Disconnect Recover (EDR) support. Remove pcie_port_find_service() and pcie_port_service_driver.reset_link since they are now unused. Link: https://lore.kernel.org/r/60e02b87b526cdf2930400059d98704bf0a147d1.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/ERR: Update error status after reset_link()Kuppuswamy Sathyanarayanan1-1/+2
Commit bdb5ac85777d ("PCI/ERR: Handle fatal error recovery") uses reset_link() to recover from fatal errors. But during fatal error recovery, if the initial value of error status is PCI_ERS_RESULT_DISCONNECT or PCI_ERS_RESULT_NO_AER_DRIVER then even after successful recovery (using reset_link()) pcie_do_recovery() will report the recovery result as failure. Update the status of error after reset_link(). You can reproduce this issue by triggering a SW DPC using "DPC Software Trigger" bit in "DPC Control Register". You should see recovery failed dmesg log as below: pcieport 0000:00:16.0: DPC: containment event, status:0x1f27 source:0x0000 pcieport 0000:00:16.0: DPC: software trigger detected pci 0000:04:00.0: AER: can't recover (no error_detected callback) pcieport 0000:00:16.0: AER: device recovery failed Fixes: bdb5ac85777d ("PCI/ERR: Handle fatal error recovery") Link: https://lore.kernel.org/r/a255fcb3a3fdebcd90f84e08b555f1786eb8eba2.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com [bhelgaas: split pci_channel_io_frozen simplification to separate patch] Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com> Cc: Ashok Raj <ashok.raj@intel.com>
2020-03-28PCI/ERR: Combine pci_channel_io_frozen casesKuppuswamy Sathyanarayanan1-6/+5
pcie_do_recovery() had two "if (state == pci_channel_io_frozen)" cases right after each other. Combine them to make this easier to read. No functional change intended. Link: https://lore.kernel.org/r/20200317170654.GA23125@infradead.org [bhelgaas: split from https://lore.kernel.org/r/a255fcb3a3fdebcd90f84e08b555f1786eb8eba2.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com] Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-24PCI/AER: Factor message prefixes with dev_fmt()Bjorn Helgaas1-3/+5
Define dev_fmt() with the common prefix of log messages so we don't have to repeat it in every printk. No functional change intended. Link: https://lore.kernel.org/r/20191213225709.GA213811@google.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-24PCI/AER: Log which device prevents error recoveryYicong Yang1-2/+4
PCI error recovery will fail if any device under the Root Port doesn't have an error_detected callback. Currently only the failure result is printed, which is not enough to identify the driver that lacks the callback. Log a message to identify the device with no error_detected callback. [bhelgaas: tweak log message] Link: https://lore.kernel.org/r/1576237474-32021-1-git-send-email-yangyicong@hisilicon.com Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-07PCI: Get rid of dev->has_secondary_link flagMika Westerberg1-1/+1
In some systems, the Device/Port Type in the PCI Express Capabilities register incorrectly identifies upstream ports as downstream ports. d0751b98dfa3 ("PCI: Add dev->has_secondary_link to track downstream PCIe links") addressed this by adding pci_dev.has_secondary_link, which is set for downstream ports. But this is confusing because pci_pcie_type() sometimes gives the wrong answer, and it's not obvious that we should use pci_dev.has_secondary_link instead. Reduce the confusion by correcting the type of the port itself so that pci_pcie_type() returns the actual type regardless of what the Device/Port Type register claims it is. Update the users to call pci_pcie_type() and pcie_downstream_port() accordingly, and remove pci_dev.has_secondary_link completely. Link: https://lore.kernel.org/linux-pci/20190703133953.GK128603@google.com/ Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20190822085553.62697-2-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-10-03PCI/ERR: Remove duplicated include from err.cYueHaibing1-1/+0
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-10-03PCI: Unify device inaccessibleKeith Busch1-6/+4
Bring surprise removals and permanent failures together so we no longer need separate flags. The implementation enforces that error handling will not be able to override a surprise removal's permanent channel failure. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org>
2018-10-03PCI/ERR: Always report current recovery status for udevKeith Busch1-3/+2
A device still participates in error recovery even if it doesn't have the error callbacks. Always provide the status for user event watchers. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org>
2018-10-03PCI/ERR: Simplify broadcast calloutsKeith Busch1-69/+38
There is no point in having a generic broadcast function if it needs to have special cases for each callback it broadcasts. Abstract the error broadcast to only the necessary information and removes the now unnecessary helper to walk the bus. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org>
2018-09-26PCI/ERR: Run error recovery callbacks for all affected devicesKeith Busch1-64/+21
If an Endpoint reported an error with ERR_FATAL, we previously ran driver error recovery callbacks only for the Endpoint's driver. But if we reset a Link to recover from the error, all downstream components are affected, including the Endpoint, any multi-function peers, and children of those peers. Initiate the Link reset from the deepest Downstream Port that is reliable, and call the error recovery callbacks for all its children. If a Downstream Port (including a Root Port) reports an error, we assume the Port itself is reliable and we need to reset its downstream Link. In all other cases (Switch Upstream Ports, Endpoints, Bridges, etc), we assume the Link leading to the component needs to be reset, so we initiate the reset at the parent Downstream Port. This allows two other clean-ups. First, we currently only use a Link reset, which can only be initiated using a Downstream Port, so we can remove checks for Endpoints. Second, the Downstream Port where we initiate the Link reset is reliable (unlike components downstream from it), so the special cases for error detect and resume are no longer necessary. Signed-off-by: Keith Busch <keith.busch@intel.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org>
2018-09-26PCI/ERR: Handle fatal error recoveryKeith Busch1-69/+6
We don't need to be paranoid about the topology changing while handling an error. If the device has changed in a hotplug capable slot, we can rely on the presence detection handling to react to a changing topology. Restore the fatal error handling behavior that existed before merging DPC with AER with 7e9084b36740 ("PCI/AER: Handle ERR_FATAL with removal and re-enumeration of devices"). Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org>
2018-09-21PCI/ERR: Use slot reset if availableKeith Busch1-1/+1
The secondary bus reset may have link side effects that a hotplug capable port may incorrectly react to. Use the slot specific reset for hotplug ports, fixing the undesirable link down-up handling during error recovering. Signed-off-by: Keith Busch <keith.busch@intel.com> [bhelgaas: fold in https://lore.kernel.org/linux-pci/20180926152326.14821-1-keith.busch@intel.com for issue reported by Stephen Rothwell <sfr@canb.auug.org.au>] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org>
2018-09-18PCI: Simplify disconnected markingLukas Wunner1-6/+2
Commit 89ee9f768003 ("PCI: Add device disconnected state") iterates over the devices on a parent bus, marks each as disconnected, then marks each device's children as disconnected using pci_walk_bus(). The same can be achieved more succinctly by calling pci_walk_bus() on the parent bus. Moreover, this does not need to wait until acquiring pci_lock_rescan_remove(), so move it out of that critical section. The critical section in err.c contains a pci_dev_get() / pci_dev_put() pair which was apparently copy-pasted from pciehp_pci.c. In the latter it serves the purpose of holding the struct pci_dev in place until the Command register is updated. err.c doesn't do anything like that, hence the pair is unnecessary. Remove it. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Oza Pawandeep <poza@codeaurora.org> Cc: Sinan Kaya <okaya@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2018-08-15Merge branch 'pci/virtualization'Bjorn Helgaas1-2/+4
- To avoid bus errors, enable PASID only if entire path supports End-End TLP prefixes (Sinan Kaya) - Unify slot and bus reset functions and remove hotplug knowledge from callers (Sinan Kaya) - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to fix guest reboot issues (Alex Williamson) - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD Controller (Bjorn Helgaas) * pci/virtualization: PCI: Add function 1 DMA alias quirk for Marvell 88SS9183 PCI: Delay after FLR of Intel DC P3700 NVMe PCI: Disable Samsung SM961/PM961 NVMe before FLR PCI: Export pcie_has_flr() PCI: Rename pci_try_reset_bus() to pci_reset_bus() PCI: Deprecate pci_reset_bus() and pci_reset_slot() functions PCI: Unify try slot and bus reset API PCI: Hide pci_reset_bridge_secondary_bus() from drivers IB/hfi1: Use pci_try_reset_bus() for initiating PCI Secondary Bus Reset PCI: Handle error return from pci_reset_bridge_secondary_bus() PCI/IOV: Tidy pci_sriov_set_totalvfs() PCI: Enable PASID only if entire path supports End-End TLP prefixes # Conflicts: # drivers/pci/hotplug/pciehp_hpc.c
2018-08-15Merge branch 'pci/aer'Bjorn Helgaas1-9/+6
- Decode AER errors with names similar to "lspci" (Tyler Baicar) - Expose AER statistics in sysfs (Rajat Jain) - Clear AER status bits selectively based on the type of recovery (Oza Pawandeep) - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru Gagniuc) - Don't clear AER status bits if we're using the "Firmware-First" strategy where firmware owns the registers (Alexandru Gagniuc) * pci/aer: PCI/AER: Don't clear AER bits if error handling is Firmware-First PCI/AER: Remove duplicate PCI_EXP_AER_FLAGS definition PCI/portdrv: Remove pcie_portdrv_err_handler.slot_reset PCI/AER: Clear device status bits during ERR_COR handling PCI/AER: Clear device status bits during ERR_FATAL and ERR_NONFATAL PCI/AER: Remove ERR_FATAL code from ERR_NONFATAL path PCI/AER: Factor out ERR_NONFATAL status bit clearing PCI/AER: Clear only ERR_NONFATAL bits during non-fatal recovery PCI/AER: Clear only ERR_FATAL status bits during fatal recovery PCI/AER: Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST PCI/AER: Add sysfs attributes for rootport cumulative stats PCI/AER: Add sysfs attributes to provide AER stats and breakdown PCI/AER: Define aer_stats structure for AER capable devices PCI/AER: Move internal declarations to drivers/pci/pci.h PCI/AER: Adopt lspci names for AER error decoding PCI/AER: Expose internal API for obtaining AER information # Conflicts: # drivers/pci/pci.h
2018-07-26PCI/AER: Work around use-after-free in pcie_do_fatal_recovery()Thomas Tai1-0/+2
When an fatal error is received by a non-bridge device, the device is removed, and pci_stop_and_remove_bus_device() deallocates the device structure. The freed device structure is used by subsequent code to send uevents and print messages. Hold a reference on the device until we're finished using it. This is not an ideal fix because pcie_do_fatal_recovery() should not use the device at all after removing it, but that's too big a project for right now. Fixes: 7e9084b36740 ("PCI/AER: Handle ERR_FATAL with removal and re-enumeration of devices") Signed-off-by: Thomas Tai <thomas.tai@oracle.com> [bhelgaas: changelog, reduce get/put coverage] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-20PCI/AER: Clear device status bits during ERR_FATAL and ERR_NONFATALOza Pawandeep1-0/+2
Clear the device status bits while handling both ERR_FATAL and ERR_NONFATAL cases. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> [bhelgaas: rename to pci_aer_clear_device_status(), declare internal to PCI core instead of exposing it everywhere] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-20PCI/AER: Remove ERR_FATAL code from ERR_NONFATAL pathOza Pawandeep1-8/+3
broadcast_error_message() is only used for ERR_NONFATAL events, when the state is always pci_channel_io_normal, so remove the unused alternate path. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-20PCI/AER: Clear only ERR_FATAL status bits during fatal recoveryBjorn Helgaas1-1/+1
During recovery from fatal errors, we previously called pci_cleanup_aer_uncorrect_error_status(), which cleared *all* uncorrectable error status bits (both ERR_FATAL and ERR_NONFATAL). Instead, call a new pci_aer_clear_fatal_status() that clears only the ERR_FATAL bits (as indicated by the PCI_ERR_UNCOR_SEVER register). Based-on-patch-by: Oza Pawandeep <poza@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-20PCI: Hide pci_reset_bridge_secondary_bus() from driversSinan Kaya1-1/+1
Rename pci_reset_bridge_secondary_bus() to pci_bridge_secondary_bus_reset() and move the declaration from linux/pci.h to drivers/pci.h to be used internally in PCI directory only. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-20PCI: Handle error return from pci_reset_bridge_secondary_bus()Sinan Kaya1-2/+4
Commit 01fd61c0b9bd ("PCI: Add a return type for pci_reset_bridge_secondary_bus()") added a return value to the function to return if a device is accessible following a reset. Callers are not checking the value. Pass error code up high in the stack if device is not accessible. Fixes: 01fd61c0b9bd ("PCI: Add a return type for pci_reset_bridge_secondary_bus()") Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-03PCI/AER: Pass service type to pcie_do_fatal_recovery()Oza Pawandeep1-5/+6
Pass the service type to pcie_do_fatal_recovery() instead of assuming AER. We will make DPC also use pcie_do_fatal_recovery(), and it needs to do things a little differently for AER and DPC. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> [bhelgaas: split to separate patch] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-18PCI/portdrv: Add generic pcie_port_find_service()Oza Pawandeep1-3/+1
Add generic pcie_port_find_service() routine. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-05-18PCI/AER: Factor out error reporting to drivers/pci/pcie/err.cOza Pawandeep1-0/+389
Move the error reporting callbacks from aerdrv_core.c to err.c, where they can be used by DPC in addition to AER. As part of aerdrv_core.c, these callbacks were built under CONFIG_PCIEAER. Moving them to the new err.c means they will now be built under CONFIG_PCIEPORTBUS, so adjust the definition of pci_uevent_ers() to match. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> [bhelgaas: in reset_link(), initialize "driver" even if CONFIG_PCIEAER is unset, update pci_uevent_ers() #ifdef wrapper] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-19 09:55:14 +0300