| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When the "extra device ports" configuration was first added, the
additional mxp_device_port_connect_info registers were added around the
existing mxp_mesh_port_connect_info registers. What I missed about
CMN-700 is that it shuffled them around to remove this discontinuity.
As such, tweak the definitions and factor out a helper for reading these
registers so we can deal with this discrepancy easily, which does at
least allow nicely tidying up the callsites. With this we can then also
do the nice thing and skip accesses completely rather than relying on
RES0 behaviour where we know the extra registers aren't defined.
Fixes: 23760a014417 ("perf/arm-cmn: Add CMN-700 support")
Reported-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/71d129241d4d7923cde72a0e5b4c8d2f6084525f.1681295193.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
DTC cycle count events don't have anything to validate or initialise in
themselves, but we should not forget to still validate their whole group
context. Otherwise, we may fail to correctly reject a contrived group
containing an impossible number of cycles events.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/3124e8c276a1f513c1a415dc839ca4181b3c8bc8.1680522545.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
As eventid field was expanded to support new mesh versions, it started to
overlap with wp_combine field. Move wp_combine to fix the issue.
Fixes: 23760a014417 ("perf/arm-cmn: Add CMN-700 support")
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20230301175540.19891-1-ilkka@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit
architectural register (ZT0, for the look-up table feature) that
Linux needs to save/restore
- Include TPIDR2 in the signal context and add the corresponding
kselftests
- Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI
support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG
(ARM CMN) at probe time
- Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64
- Permit EFI boot with MMU and caches on. Instead of cleaning the
entire loaded kernel image to the PoC and disabling the MMU and
caches before branching to the kernel bare metal entry point, leave
the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of
all of system RAM to populate the initial page tables
- Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64
kernel (the arm32 kernel only defines the values)
- Harden the arm64 shadow call stack pointer handling: stash the shadow
stack pointer in the task struct on interrupt, load it directly from
this structure
- Signal handling cleanups to remove redundant validation of size
information and avoid reading the same data from userspace twice
- Refactor the hwcap macros to make use of the automatically generated
ID registers. It should make new hwcaps writing less error prone
- Further arm64 sysreg conversion and some fixes
- arm64 kselftest fixes and improvements
- Pointer authentication cleanups: don't sign leaf functions, unify
asm-arch manipulation
- Pseudo-NMI code generation optimisations
- Minor fixes for SME and TPIDR2 handling
- Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable,
replace strtobool() to kstrtobool() in the cpufeature.c code, apply
dynamic shadow call stack in two passes, intercept pfn changes in
set_pte_at() without the required break-before-make sequence, attempt
to dump all instructions on unhandled kernel faults
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (130 commits)
arm64: fix .idmap.text assertion for large kernels
kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests
kselftest/arm64: Copy whole EXTRA context
arm64: kprobes: Drop ID map text from kprobes blacklist
perf: arm_spe: Print the version of SPE detected
perf: arm_spe: Add support for SPEv1.2 inverted event filtering
perf: Add perf_event_attr::config3
arm64/sme: Fix __finalise_el2 SMEver check
drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable
arm64/signal: Only read new data when parsing the ZT context
arm64/signal: Only read new data when parsing the ZA context
arm64/signal: Only read new data when parsing the SVE context
arm64/signal: Avoid rereading context frame sizes
arm64/signal: Make interface for restore_fpsimd_context() consistent
arm64/signal: Remove redundant size validation from parse_user_sigframe()
arm64/signal: Don't redundantly verify FPSIMD magic
arm64/cpufeature: Use helper macros to specify hwcaps
arm64/cpufeature: Always use symbolic name for feature value in hwcaps
arm64/sysreg: Initial unsigned annotations for ID registers
arm64/sysreg: Initial annotation of signed ID registers
...
|
|
It turns out the optimisation implemented by commit 4f2c3872dde5 is
totally broken, since all the places that consume hw->dtcs_used for
events other than cycle count are still not expecting it to be sparsely
populated, and fail to read all the relevant DTC counters correctly if
so.
If implemented correctly, the optimisation potentially saves up to 3
register reads per event update, which is reasonably significant for
events targeting a single node, but still not worth a massive amount of
additional code complexity overall. Getting it right within the current
design looks a fair bit more involved than it was ever intended to be,
so let's just make a functional revert which restores the old behaviour
while still backporting easily.
Fixes: 4f2c3872dde5 ("perf/arm-cmn: Optimise DTC counter accesses")
Reported-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/b41bb4ed7283c3d8400ce5cf5e6ec94915e6750f.1674498637.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Although we treat the DTM counters as free-running such that we're not
too concerned about the initial DTM state, it's possible for a previous
user to have left DTM counters enabled and paired with DTC counters.
Thus if the first events are scheduled using some, but not all, DTMs,
the as-yet-unused ones could end up adding spurious increments to the
event counts at the DTC. Make sure we sync our initial DTM_PMU_CONFIG
state to all the DTMs at probe time to avoid that possibility.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/ba5f38b3dc733cd06bfb5e659b697e76d18c2183.1670269572.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
CMN-600 uses bits [27:0] for child node address offset while bits [30:28]
are required to be zero.
For CMN-650, the child node address offset field has been increased
to include bits [29:0] while leaving only bit 30 set to zero.
Let's include the missing two bits and assume older implementations
comply with the spec and set bits [29:28] to 0.
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Fixes: 60d1504070c2 ("perf/arm-cmn: Support new IP features")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220808195455.79277-1-ilkka@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The debugfs code is lazy, and since it only keeps the bottom byte of
each connect_info register to save space, it also treats the whole thing
as the device_type since the other bits were reserved anyway. Upon
closer inspection, though, this is no longer true on newer IP versions,
so let's be good and decode the exact field properly. This should help
it not get confused when a Component Aggregation Layer is present (which
is already implied if Node IDs are found for both device addresses
represented by the next two lines of the table).
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/6a13a6128a28cfe2eec6d09cf372a167ec9c3b65.1652274773.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Carefully considering the bounds of an array is all well and good,
until you forget that that array also contains a NULL sentinel at
the end and dereference it. So close...
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/bebba768156aa3c0757140457bdd0fec10819388.1652217788.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add the identifiers, events, and subtleties for CMN-700. Highlights
include yet more options for doubling up CHI channels, which finally
grows event IDs beyond 8 bits for XPs, and a new set of CML gateway
nodes adding support for CXL as well as CCIX, where the Link Agent is
now internal to the CMN mesh so we gain regular PMU events for that too.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/cf892baa0d0258ea6cd6544b15171be0069a083a.1650320598.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
So far, DNs and HN-Fs have each had one event ralated to occupancy
trackers which are filtered by a separate field. CMN-700 raises the
stakes by introducing two more sets of HN-F events with corresponding
additional filter fields. Prepare for this by refactoring our filter
selection and tracking logic to account for multiple filter types
coexisting on the same node. This need not affect the uAPI, which can
just continue to encode any per-event filter setting in the "occupid"
config field, even if it's technically not the most accurate name for
some of them.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/1aa47ba0455b144c416537f6b0e58dc93b467a00.1650320598.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add the identifiers and events for CMN-650, which slots into its
evolutionary position between CMN-600 and the 700-series products.
Imagine CMN-600 made bigger, and with most of the rough edges smoothed
off, but that then balanced out by some bonkers PMU functionality for
the new HN-P enhancement in CMN-650r2.
Most of the CXG events are actually common to newer revisions of CMN-600
too, so they're arguably a little late; oh well.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/b0adc5824db53f71a2b561c293e2120390106536.1650320598.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
From CMN-650 onwards, some of the fields in the watchpoint config
registers moved subtly enough to easily overlook. Watchpoint events are
still only partially supported on newer IPs - which in itself deserves
noting - but were not intended to become any *less* functional than on
CMN-600.
Fixes: 60d1504070c2 ("perf/arm-cmn: Support new IP features")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/e1ce4c2f1e4f73ab1c60c3a85e4037cd62dd6352.1645727871.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
CMN-600 doesn't have XP events for the PUB channel, but we missed
the appropriate check to avoid exposing them.
Fixes: 60d1504070c2 ("perf/arm-cmn: Support new IP features")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/4c108d39a0513def63acccf09ab52b328f242aeb.1645727871.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Indeed our debugfs directory is driver-internal so should be static.
Link: https://lore.kernel.org/r/202202030812.II1K2ZXf-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/ca9248caaae69b5134f69e085fe78905dfe74378.1643911278.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In general, detailed performance analysis will require knoweldge of the
the SoC beyond the CMN itself - e.g. which actual CPUs/peripherals/etc.
are connected to each node. However for certain development and bringup
tasks it can be useful to have a quick overview of the CMN internal
topology to hand too. Add a debugfs file to map this out.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/159fd4d7e19fb3c8801a8cb64ee73ec50f55903c.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add the identifiers and events for the CI-700 coherent interconnect.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/28f566ab23a83733c6c9ef9414c010b760b4549c.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The second generation of CMN IPs add new node types and significantly
expand the configuration space with options for extra device ports on
edge XPs, either plumbed into the regular DTM or with extra dedicated
DTMs to monitor them, plus larger (and smaller) mesh sizes. Add basic
support for pulling this new information out of the hardware, piping
it around as necessary, and handling (most of) the new choices.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/e58b495bcc7deec3882be4bac910ed0bf6979674.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In preparation for supporting newer CMN products, let's introduce a
means to differentiate the features and events which are specific to a
particular IP from those which remain common to the whole family. The
newer designs have also smoothed off some of the rough edges in terms
of discoverability, so separate out the parts of the flow which have
effectively now become CMN-600 quirks.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/9f6368cdca4c821d801138939508a5bba54ccabb.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
With the value of CMN_MAX_DTMS increasing significantly, our validation
data structure is set to get quite big. Technically we could pack it at
least twice as densely, since we only need around 19 bits of information
per DTM, but that makes the code even more mind-bogglingly impenetrable,
and even half of "quite big" may still be uncomfortably large for a
stack frame (~1KB). Just move it to an off-stack allocation instead.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/0cabff2e5839ddc0979e757c55515966f65359e4.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In cases where we do know which DTC domain a node belongs to, we can
skip initialising or reading the global count in DTCs where we know
it won't change. The machinery to achieve that is mostly in place
already, so finish hooking it up by converting the vestigial domain
tracking to propagate suitable bitmaps all the way through to events.
Note that this does not allow allocating such an unused counter to a
different event on that DTC, because that is a flippin' nightmare.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/51d930fd945ef51c81f5889ccca055c302b0a1d0.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When multiple nodes of the same type are connected to the same XP
(particularly in CAL configurations), it seems that they are likely
to be consecutive in logical ID. Therefore, we're likely to gain a
small benefit from an easy tweak to optimise out consecutive reads
of the same set of DTM counters for an aggregated event.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/7777d77c2df17693cd3dabb6e268906e15238d82.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Untangle DTMs from XPs into a dedicated abstraction. This helps make
things a little more obvious and robust, but primarily paves the way
for further development where new IPs can grow extra DTMs per XP.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/9cca18b1b98f482df7f1aaf3d3213e7f39500423.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Refactor the places where we scan through the set of nodes to switch
from explicit array indexing to pointer-based iteration. This leads to
slightly simpler object code, but also makes the source less dense and
more pleasant for further development. It also unearths an almost-bug
in arm_cmn_event_init() where we've been depending on the "array index"
of NULL relative to cmn->dns being a sufficiently large number, yuck.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/ee0c9eda9a643f46001ac43aadf3f0b1fd5660dd.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add a bit more abstraction for the places where we decompose node IDs.
This will help keep things nice and manageable when we come to add yet
more variables which affect the node ID format. Also use the opportunity
to move the rest of the low-level node management helpers back up to the
logical place they were meant to be - how they ended up buried right in
the middle of the event-related definitions is somewhat of a mystery...
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/a2242a8c3c96056c13a04ae87bf2047e5e64d2d9.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Although CMN is currently (and overwhelmingly likely to remain) deployed
in arm64-only (modulo userspace) systems, the 64-bit "dependency" for
compile-testing was just laziness due to heavy reliance on readq/writeq
accessors. Since we only need one extra include for robustness in that
regard, let's pull that in, widen the compile-test coverage, and fix up
the smattering of type laziness that that brings to light.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/baee9ee0d0bdad8aaeb70f5a4b98d8fd4b1f5786.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
On a system with multiple CMN meshes, ideally we'd want to access each
PMU from within its own mesh, rather than with a long CML round-trip,
wherever feasible. Since such a system is likely to be presented as
multiple NUMA nodes, let's also hope a proximity domain is specified
for each CMN programming interface, and use that to guide our choice
of IRQ affinity to favour a node-local CPU where possible.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/32438b0d016e0649d882d47d30ac2000484287b9.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Attempting to migrate the PMU context after we've unregistered the PMU
device, or especially if we never successfully registered it in the
first place, is a woefully bad idea. It's also fundamentally pointless
anyway. Make sure to unregister an instance from the hotplug handler
*without* invoking the teardown callback.
Fixes: 0ba64770a2f2 ("perf: Add Arm CMN-600 PMU driver")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/2c221d745544774e4b07583b65b5d4d94f7e0fe4.1638530442.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
IRQ number
When multiple dtcs share the same IRQ number, the irq_friend which
used to refer to dtc object gets calculated incorrect which leads
to invalid pointer.
Fixes: 0ba64770a2f2 ("perf: Add Arm CMN-600 PMU driver")
Signed-off-by: Tuan Phan <tuanphan@os.amperecomputing.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1623946129-3290-1-git-send-email-tuanphan@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Fix a warning from checkpatch.pl.
ERROR: space required after that ',' (ctx:VxV)
Signed-off-by: Junhao He <hejunhao2@hisilicon.com>
Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Link: https://lore.kernel.org/r/1620736054-58412-4-git-send-email-f.fangjian@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The driver uses irq_set_affinity_hint() to set the affinity for the PMU
interrupts, which relies on the undocumented side effect that this function
actually sets the affinity under the hood.
Setting an hint is clearly not a guarantee and for these PMU interrupts an
affinity hint, which is supposed to guide userspace for setting affinity,
is beyond pointless, because the affinity of these interrupts cannot be
modified from user space.
Aside of that the error checks are bogus because the only error which is
returned from irq_set_affinity_hint() is when there is no irq descriptor
for the interrupt number, but not when the affinity set fails. That's on
purpose because the hint can point to an offline CPU.
Replace the mindless abuse with irq_set_affinity().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210518093118.277228577@linutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Fix the following coccicheck warning:
./drivers/perf/hisilicon/hisi_uncore_pmu.c:128:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/fsl_imx8_ddr_perf.c:173:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm_spe_pmu.c:129:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm_smmu_pmu.c:563:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm_dsu_pmu.c:149:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm_dsu_pmu.c:139:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm-cmn.c:563:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm-cmn.c:351:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm-ccn.c:224:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm-cci.c:708:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm-cci.c:699:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm-cci.c:528:8-16: WARNING: use scnprintf or sprintf.
./drivers/perf/arm-cci.c:309:8-16: WARNING: use scnprintf or sprintf.
Signed-off-by: Zihao Tang <tangzihao1@hisilicon.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1616148273-16374-2-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
If we migrate the PMU context to another CPU, we need to remember to
retarget the IRQs as well.
Fixes: 0ba64770a2f2 ("perf: Add Arm CMN-600 PMU driver")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/e080640aea4ed8dfa870b8549dfb31221803eb6b.1611839564.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Although it's neat to avoid the suffix for the typical case of a
single PMU, it means systems with multiple CMN instances end up with
inconsistent naming. I think it also breaks perf tool's "uncore alias"
logic if the common instance prefix is also the full name of one.
Avoid any surprises by not trying to be clever and simply numbering
every instance, even when it might technically prove redundant.
Fixes: 0ba64770a2f2 ("perf: Add Arm CMN-600 PMU driver")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/649a2281233f193d59240b13ed91b57337c77b32.1611839564.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The only usage is to put their addresses in an array of pointers to
const struct attribute group. Make them const to allow the compiler
to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210117212847.21319-5-rikard.falkeborn@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The node type field is an enum type, so print it as a 32-bit quantity
rather than as an unsigned short.
Link: https://lore.kernel.org/r/202009302350.QIzfkx62-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Ensure that the 'irq' field of 'struct arm_cmn_dtc' is a signed int
so that it can be compared '< 0'.
Link: https://lore.kernel.org/r/20200929170835.GA15956@embeddedor
Addresses-Coverity-ID: 1497488 ("Unsigned compared against 0")
Fixes: 0ba64770a2f2 ("perf: Add Arm CMN-600 PMU driver")
Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Initial driver for PMU event counting on the Arm CMN-600 interconnect.
CMN sports an obnoxiously complex distributed PMU system as part of
its debug and trace features, which can do all manner of things like
sampling, cross-triggering and generating CoreSight trace. This driver
covers the PMU functionality, plus the relevant aspects of watchpoints
for simply counting matching flits.
Tested-by: Tsahi Zidenberg <tsahee@amazon.com>
Tested-by: Tuan Phan <tuanphan@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
