summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/tegra
AgeCommit message (Collapse)AuthorFilesLines
2022-05-05pinctrl: tegra: tegra194: drop unused pin groupsKrzysztof Kozlowski1-9/+0
The sdmmc1_hv_trim_pins, sdmmc3_hv_trim_pins and sys_reset_n_pins are not defined as pin groups: drivers/pinctrl/tegra/pinctrl-tegra194.c:1119:27: error: ‘sdmmc3_hv_trim_pins’ defined but not used [-Werror=unused-const-variable=] 1119 | static const unsigned int sdmmc3_hv_trim_pins[] = { Proper fix would be to define them, but this requires knowledge from datasheet. Removal should not cause any harm and at least it silences the warnings. Fixes: 613c0826081b ("pinctrl: tegra: Add pinmux support for Tegra194") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220429061332.25135-1-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-11-16pinctrl: tegra194: remove duplicate initializer againArnd Bergmann1-1/+0
An earlier bugfix removed a duplicate field initializer in a macro, but it seems that this came back with the following update: drivers/pinctrl/tegra/pinctrl-tegra194.c:1341:28: error: initialized field overwritten [-Werror=override-init] 1341 | .drv_reg = ((r)), \ | ^ drivers/pinctrl/tegra/pinctrl-tegra194.c:1392:41: note: in expansion of macro 'DRV_PINGROUP_ENTRY_Y' 1392 | #define drive_touch_clk_pcc4 DRV_PINGROUP_ENTRY_Y(0x2004, 12, 5, 20, 5, -1, -1, -1, -1, 1) | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:1631:17: note: in expansion of macro 'drive_touch_clk_pcc4' 1631 | drive_##pg_name, \ | ^~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:1636:9: note: in expansion of macro 'PINGROUP' 1636 | PINGROUP(touch_clk_pcc4, GP, TOUCH, RSVD2, RSVD3, 0x2000, 1, Y, -1, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_ao"), | ^~~~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:1341:28: note: (near initialization for 'tegra194_groups[0].drv_reg') 1341 | .drv_reg = ((r)), \ | ^ drivers/pinctrl/tegra/pinctrl-tegra194.c:1392:41: note: in expansion of macro 'DRV_PINGROUP_ENTRY_Y' 1392 | #define drive_touch_clk_pcc4 DRV_PINGROUP_ENTRY_Y(0x2004, 12, 5, 20, 5, -1, -1, -1, -1, 1) | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:1631:17: note: in expansion of macro 'drive_touch_clk_pcc4' 1631 | drive_##pg_name, \ | ^~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:1636:9: note: in expansion of macro 'PINGROUP' 1636 | PINGROUP(touch_clk_pcc4, GP, TOUCH, RSVD2, RSVD3, 0x2000, 1, Y, -1, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_ao"), | ^~~~~~~~ Remove it again. Fixes: 613c0826081b ("pinctrl: tegra: Add pinmux support for Tegra194") Fixes: 92cadf68e50a ("pinctrl: tegra: pinctrl-tegra194: Do not initialise field twice") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211104133645.1186968-1-arnd@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-11-16pinctrl: tegra: Return const pointer from tegra_pinctrl_get_group()Prathamesh Shete1-2/+2
Instead of returning const pointer from tegra_pinctrl_get_group() the return value is being casted. This change helps return const pointer. Signed-off-by: Prathamesh Shete <pshete@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-26pinctrl: tegra: Fix warnings and errorPrathamesh Shete1-3/+2
Fix warnings are errors caused by commit a42c7d95d29e ("pinctrl: tegra: Use correct offset for pin group"). Signed-off-by: Prathamesh Shete <pshete@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-26pinctrl: tegra: Use correct offset for pin groupPrathamesh Shete1-2/+31
Function tegra_pinctrl_gpio_request_enable() and tegra_pinctrl_gpio_disable_free() uses pin offset instead of group offset, causing the driver to use wrong offset to enable gpio. Add a helper function tegra_pinctrl_get_group() to parse the pin group and determine correct offset. Signed-off-by: Kartik K <kkartik@nvidia.com> Signed-off-by: Prathamesh Shete <pshete@nvidia.com> Link: https://lore.kernel.org/r/20211025110959.27751-1-pshete@nvidia.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-25pinctrl: tegra: Add pinmux support for Tegra194Prathamesh Shete1-35/+1759
This change adds pinmux table entries for Tegra194 Signed-off-by: Prathamesh Shete <pshete@nvidia.com> Link: https://lore.kernel.org/r/20211018121815.3017-2-pshete@nvidia.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-25pinctrl: tegra: include lpdr pin propertiesSuresh Mangipudi2-164/+168
Update lpdr pin-property for supported pins. lpdr property help disable most basic driver fingers leaving only minimal base driver finger. Signed-off-by: Suresh Mangipudi <smangipudi@nvidia.com> Signed-off-by: Prathamesh Shete <pshete@nvidia.com> Link: https://lore.kernel.org/r/20211018121815.3017-1-pshete@nvidia.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-09Merge tag 'pinctrl-v5.9-1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of the pin control changes for the v5.9 kernel series: Core changes: - The GPIO patch "gpiolib: Introduce for_each_requested_gpio_in_range() macro" was put in an immutable branch and merged into the pinctrl tree as well. We see these changes also here. - Improved debug output for pins used as GPIO. New drivers: - Ocelot Sparx5 SoC driver. - Intel Emmitsburg SoC subdriver. - Intel Tiger Lake-H SoC subdriver. - Qualcomm PM660 SoC subdriver. - Renesas SH-PFC R8A774E1 subdriver. Driver improvements: - Linear improvement and cleanups of the Intel drivers for Cherryview, Lynxpoint, Baytrail etc. Improved locking among other things. - Renesas SH-PFC has added support for RPC pins, groups, and functions to r8a77970 and r8a77980. - The newere Freescale (now NXP) i.MX8 pin controllers have been modularized. This is driven by the Google Android GKI initiative I think. - Open drain support for pins on the Qualcomm IPQ4019. - The Ingenic driver can handle both edges IRQ detection. - A big slew of documentation fixes all over the place. - A few irqchip template conversions by yours truly. * tag 'pinctrl-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits) dt-bindings: pinctrl: add bindings for MediaTek MT6779 SoC pinctrl: stmfx: Use irqchip template pinctrl: amd: Use irqchip template pinctrl: mediatek: fix build for tristate changes pinctrl: samsung: Use bank name as irqchip name pinctrl: core: print gpio in pins debugfs file pinctrl: mediatek: add mt6779 eint support pinctrl: mediatek: add pinctrl support for MT6779 SoC pinctrl: mediatek: avoid virtual gpio trying to set reg pinctrl: mediatek: update pinmux definitions for mt6779 pinctrl: stm32: use the hwspin_lock_timeout_in_atomic() API pinctrl: mcp23s08: Use irqchip template pinctrl: sx150x: Use irqchip template dt-bindings: ingenic,pinctrl: Support pinmux/pinconf nodes pinctrl: intel: Add Intel Emmitsburg pin controller support pinctl: ti: iodelay: Replace HTTP links with HTTPS ones Revert "gpio: omap: handle pin config bias flags" pinctrl: single: Use fallthrough pseudo-keyword pinctrl: qcom: spmi-gpio: Use fallthrough pseudo-keyword pinctrl: baytrail: Use fallthrough pseudo-keyword ...
2020-07-16pinctrl: tegra: pinctrl-tegra194: Do not initialise field twiceLee Jones1-1/+0
Both PIN_PINGROUP_ENTRY_Y() and DRV_PINGROUP_ENTRY_Y() macros are called for each of the 2 pin groups defined here, and both of them initialise 'drv_reg', causing the compiler to complain. Only initialise 'drv_reg' once. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/tegra/pinctrl-tegra194.c:71:14: warning: initialized field overwritten [-Woverride-init] 71 | .drv_reg = ((r)), | ^ drivers/pinctrl/tegra/pinctrl-tegra194.c:105:2: note: in expansion of macro ‘DRV_PINGROUP_ENTRY_Y’ 105 | DRV_PINGROUP_ENTRY_Y(0x14004, 12, 5, 20, 5, -1, -1, -1, -1, 0) | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:124:3: note: in expansion of macro ‘drive_pex_l5_clkreq_n_pgg0’ 124 | drive_##pg_name, | ^~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:128:2: note: in expansion of macro ‘PINGROUP’ 128 | PINGROUP(pex_l5_clkreq_n_pgg0, PE5, RSVD1, RSVD2, RSVD3, 0x14000, 0, | ^~~~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:71:14: note: (near initialization for ‘tegra194_groups[0].drv_reg’) 71 | .drv_reg = ((r)), | ^ drivers/pinctrl/tegra/pinctrl-tegra194.c:105:2: note: in expansion of macro ‘DRV_PINGROUP_ENTRY_Y’ 105 | DRV_PINGROUP_ENTRY_Y(0x14004, 12, 5, 20, 5, -1, -1, -1, -1, 0) | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:124:3: note: in expansion of macro ‘drive_pex_l5_clkreq_n_pgg0’ 124 | drive_##pg_name, | ^~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:128:2: note: in expansion of macro ‘PINGROUP’ 128 | PINGROUP(pex_l5_clkreq_n_pgg0, PE5, RSVD1, RSVD2, RSVD3, 0x14000, 0, | ^~~~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:71:14: warning: initialized field overwritten [-Woverride-init] 71 | .drv_reg = ((r)), | ^ drivers/pinctrl/tegra/pinctrl-tegra194.c:107:2: note: in expansion of macro ‘DRV_PINGROUP_ENTRY_Y’ 107 | DRV_PINGROUP_ENTRY_Y(0x1400c, 12, 5, 20, 5, -1, -1, -1, -1, 0) | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:124:3: note: in expansion of macro ‘drive_pex_l5_rst_n_pgg1’ 124 | drive_##pg_name, | ^~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:130:2: note: in expansion of macro ‘PINGROUP’ 130 | PINGROUP(pex_l5_rst_n_pgg1, PE5, RSVD1, RSVD2, RSVD3, 0x14008, 0, | ^~~~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:71:14: note: (near initialization for ‘tegra194_groups[1].drv_reg’) 71 | .drv_reg = ((r)), | ^ drivers/pinctrl/tegra/pinctrl-tegra194.c:107:2: note: in expansion of macro ‘DRV_PINGROUP_ENTRY_Y’ 107 | DRV_PINGROUP_ENTRY_Y(0x1400c, 12, 5, 20, 5, -1, -1, -1, -1, 0) | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:124:3: note: in expansion of macro ‘drive_pex_l5_rst_n_pgg1’ 124 | drive_##pg_name, | ^~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:130:2: note: in expansion of macro ‘PINGROUP’ 130 | PINGROUP(pex_l5_rst_n_pgg1, PE5, RSVD1, RSVD2, RSVD3, 0x14008, 0, | ^~~~~~~~ Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Thierry Reding <treding@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: linux-tegra@vger.kernel.org Link: https://lore.kernel.org/r/20200713144930.1034632-23-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-16pinctrl: tegra: Use noirq suspend/resume callbacksVidya Sagar1-2/+2
Use noirq suspend/resume callbacks as other drivers which implement noirq suspend/resume callbacks (Ex:- PCIe) depend on pinctrl driver to configure the signals used by their respective devices in the noirq phase. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20200604174935.26560-1-vidyas@nvidia.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-04-28pinctrl: fix several typosDejin Zheng1-1/+1
use codespell to fix lots of typos over frontends. Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> CC: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200421142402.9524-1-zhengdejin5@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-27pinctrl: tegra: Add SFIO/GPIO programming on Tegra194Thierry Reding3-0/+51
Prior to Tegra186, the selection of SFIO vs. GPIO modes was done as part of the GPIO controller's register programming. Starting with Tegra186, a pin is configured as GPIO or SFIO with a bit in a configuration register of the pin controller. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200319122737.3063291-10-thierry.reding@gmail.com Tested-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-27pinctrl: tegra: Renumber the GG.0 and GG.1 pinsThierry Reding1-7/+4
There is no need to define these at a specific offset since they are the only pins defined for this SoC generation. Begin numbering them at 0. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200319122737.3063291-9-thierry.reding@gmail.com Tested-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-27pinctrl: tegra: Do not add default pin range on Tegra194Thierry Reding2-2/+1
On Tegra194, almost all of the pin control programming happens in early boot firmware, so there is no use in having a pin range defined for all the pins. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200319122737.3063291-8-thierry.reding@gmail.com Tested-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-27pinctrl: tegra: Pass struct tegra_pmx for pin range checkThierry Reding1-3/+3
Pass the struct tegra_pmx when checking for the pin range in device tree. This makes the call site a bit easier to read and will help keep that readability in a subsequent patch. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200319122737.3063291-7-thierry.reding@gmail.com Tested-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-27pinctrl: tegra: Fix "Scmitt" -> "Schmitt" typoThierry Reding1-1/+1
Properly spell "Schmitt" in the kerneldoc for pin group definitions. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200319122737.3063291-6-thierry.reding@gmail.com Tested-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-27pinctrl: tegra: Fix whitespace issues for improved readabilityThierry Reding1-16/+17
Fix a few whitespace inconsistencies to make the code easier to read. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200319122737.3063291-5-thierry.reding@gmail.com Tested-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07pinctrl: tegra: fix missing __iomem in suspend/resumeBen Dooks (Codethink)1-2/+2
The functions should have __iomem on the register pointer so add that to silence the following sparse warnings: drivers/pinctrl/tegra/pinctrl-tegra.c:657:22: warning: incorrect type in assignment (different address spaces) drivers/pinctrl/tegra/pinctrl-tegra.c:657:22: expected unsigned int [usertype] *regs drivers/pinctrl/tegra/pinctrl-tegra.c:657:22: got void [noderef] <asn:2> * drivers/pinctrl/tegra/pinctrl-tegra.c:659:42: warning: incorrect type in argument 1 (different address spaces) drivers/pinctrl/tegra/pinctrl-tegra.c:659:42: expected void const volatile [noderef] <asn:2> *addr drivers/pinctrl/tegra/pinctrl-tegra.c:659:42: got unsigned int [usertype] * drivers/pinctrl/tegra/pinctrl-tegra.c:675:22: warning: incorrect type in assignment (different address spaces) drivers/pinctrl/tegra/pinctrl-tegra.c:675:22: expected unsigned int [usertype] *regs drivers/pinctrl/tegra/pinctrl-tegra.c:675:22: got void [noderef] <asn:2> * drivers/pinctrl/tegra/pinctrl-tegra.c:677:25: warning: incorrect type in argument 2 (different address spaces) drivers/pinctrl/tegra/pinctrl-tegra.c:677:25: expected void volatile [noderef] <asn:2> *addr drivers/pinctrl/tegra/pinctrl-tegra.c:677:25: got unsigned int [usertype] * Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Link: https://lore.kernel.org/r/20191218110456.2533088-1-ben.dooks@codethink.co.uk Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-05pinctrl: use devm_platform_ioremap_resource() to simplify codeYueHaibing2-5/+2
devm_platform_ioremap_resource() internally have platform_get_resource() and devm_ioremap_resource() in it. So instead of calling them separately use devm_platform_ioremap_resource() directly. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20191104142654.39256-1-yuehaibing@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-05pinctrl: tegra: xusb: Add note about legacy statusThierry Reding1-0/+6
Add a comment about why the call to of_match_node() cannot be replaced by of_device_get_match_data(). This will hopefully prevent people from attempting to clean this up in the future. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20190923095400.GA11084@ulmo Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-21pinctrl: tegra: Flush pinctrl writes during resumeSowjanya Komatineni1-0/+4
This patch adds pinctrl register read to flush all the prior pinctrl writes and then adds barrier for pinctrl register read to complete during resume to make sure all pinctrl changes are effective. Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Link: https://lore.kernel.org/r/1565984527-5272-3-git-send-email-skomatineni@nvidia.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-21pinctrl: tegra: Fix write barrier placement in pmx_writelSowjanya Komatineni1-1/+3
pmx_writel uses writel which inserts write barrier before the register write. This patch has fix to replace writel with writel_relaxed followed by a readback and memory barrier to ensure write operation is completed for successful pinctrl change. Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Link: https://lore.kernel.org/r/1565984527-5272-2-git-send-email-skomatineni@nvidia.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: tegra210: Add Tegra210 pinctrl pm opsSowjanya Komatineni1-0/+1
This patch adds suspend and resume functionality to Tegra210 pinctrl. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Link: https://lore.kernel.org/r/1564607463-28802-3-git-send-email-skomatineni@nvidia.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: tegra: Add suspend and resume supportSowjanya Komatineni2-0/+62
This patch adds support for Tegra pinctrl driver suspend and resume. During suspend, context of all pinctrl registers are stored and on resume they are all restored to have all the pinmux and pad configuration for normal operation. Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Link: https://lore.kernel.org/r/1564607463-28802-2-git-send-email-skomatineni@nvidia.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-14Merge tag 'pinctrl-v5.3-1' of ↵Linus Torvalds10-56/+241
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.3 kernel cycle: Core changes: - Device links can optionally be added between a pin control producer and its consumers. This will affect how the system power management is handled: a pin controller will not suspend before all of its consumers have been suspended. This was necessary for the ST Microelectronics STMFX expander and need to be tested on other systems as well: it makes sense to make this default in the long run. Right now it is opt-in per driver. - Drive strength can be specified in microamps. With decreases in silicon technology, milliamps isn't granular enough, let's make it possible to select drive strengths in microamps. Right now the Meson (AMlogic) driver needs this. New drivers: - New subdriver for the Tegra 194 SoC. - New subdriver for the Qualcomm SDM845. - New subdriver for the Qualcomm SM8150. - New subdriver for the Freescale i.MX8MN (Freescale is now a product line of NXP). - New subdriver for Marvell MV98DX1135. Driver improvements: - The Bitmain BM1880 driver now supports pin config in addition to muxing. - The Qualcomm drivers can now reserve some GPIOs as taken aside and not usable for users. This is used in ACPI systems to take out some GPIO lines used by the BIOS so that noone else (neither kernel nor userspace) will play with them by mistake and crash the machine. - A slew of refurbishing around the Aspeed drivers (board management controllers for servers) in preparation for the new Aspeed AST2600 SoC. - A slew of improvements over the SH PFC drivers as usual. - Misc cleanups and fixes" * tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (106 commits) pinctrl: aspeed: Strip moved macros and structs from private header pinctrl: aspeed: Fix missed include pinctrl: baytrail: Use GENMASK() consistently pinctrl: baytrail: Re-use data structures from pinctrl-intel.h pinctrl: baytrail: Use defined macro instead of magic in byt_get_gpio_mux() pinctrl: qcom: Add SM8150 pinctrl driver dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding dt-bindings: pinctrl: qcom: Document missing gpio nodes pinctrl: aspeed: Add implementation-related documentation pinctrl: aspeed: Split out pinmux from general pinctrl pinctrl: aspeed: Clarify comment about strapping W1C pinctrl: aspeed: Correct comment that is no longer true MAINTAINERS: Add entry for ASPEED pinctrl drivers dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema dt-bindings: pinctrl: aspeed: Split bindings document in two pinctrl: qcom: Add irq_enable callback for msm gpio pinctrl: madera: Fixup SPDX headers pinctrl: qcom: sdm845: Fix CONFIG preprocessor guard pinctrl: tegra: Add bitmask support for parked bits ...
2019-06-25pinctrl: tegra: Add bitmask support for parked bitsThierry Reding8-47/+57
Some pin groups have park bits for multiple pins in one register. Support this by turning the parked bit field into a parked bitmask field. If no parked bits are supported, the bitmask can be 0. Update the pingroup table on Tegra210, which is the only generation where this is supported, with the parked bitmask. Signed-off-by: Thierry Reding <treding@nvidia.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-25pinctrl: tegra: Set specific GPIO compatible stringThierry Reding3-3/+3
Rather than reuse the nvidia,tegra30-gpio compatible string to find the GPIO controller on Tegra30, Tegra114, Tegra124 and Tegra210, use the most specific compatible string for each SoC generation for consistency. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288Thomas Gleixner8-72/+8
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-01pinctrl: tegra: Add Tegra194 pinmux driverKrishna Yarlagadda3-0/+175
Tegra194 has PCIE L5 rst and clkreq pins which need to be controlled dynamically at runtime. This driver supports change pinmux for these pins. Pinmux for rest of the pins is set statically by bootloader and will not be changed by this driver Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Signed-off-by: Suresh Mangipudi <smangipudi@nvidia.com> Tested-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-01pinctrl: tegra: Support 32 bit register accessKrishna Yarlagadda2-8/+8
Tegra194 chip has 32 bit pinctrl registers. Existing register defines in header are only 16 bit. Modified common pinctrl-tegra driver to support 32 bit registers of Tegra 194 and later chips. Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20pinctrl: tegra: do not export tegra_pinctrl_probeStefan Agner1-1/+0
No user of tegra_pinctrl_probe can be built as a module, hence exporting the symbol is not necessary. Drop EXPORT_SYMBOL_GPL. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-03pinctrl: tegra: Move drivers registration to arch_init levelDmitry Osipenko5-5/+30
There is a bug in regards to deferred probing within the drivers core that causes GPIO-driver to suspend after its users. The bug appears if GPIO-driver probe is getting deferred, which happens after introducing dependency on PINCTRL-driver for the GPIO-driver by defining "gpio-ranges" property in device-tree. The bug in the drivers core is old (more than 4 years now) and is well known, unfortunately there is no easy fix for it. The good news is that we can workaround the deferred probe issue by changing GPIO / PINCTRL drivers registration order and hence by moving PINCTRL driver registration to the arch_init level and GPIO to the subsys_init. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-30pinctrl: tegra: define GPIO compatible node per SoCStefan Agner7-3/+9
Tegra 2 uses a different GPIO controller which uses "tegra20-gpio" as compatible string. Make the compatible string the GPIO node is using a SoC specific property. This prevents the kernel from registering the GPIO range twice in case the GPIO range is specified in the device tree. Fixes: 9462510ce31e ("pinctrl: tegra: Only set the gpio range if needed") Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-06-13treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook1-3/+3
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-16pinctrl: tegra20: Provide CDEV1/2 clock muxesDmitry Osipenko3-12/+40
Muxing of pins MCLK1/2 determine the muxing of the corresponding clocks. Make pinctrl driver to provide clock muxes for the CDEV1/2 pingroups, so that main clk-controller driver could get an actual parent clock for the CDEV1/2 clocks. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Marcel Ziswiler <marcel@ziswiler.com> Tested-by: Marcel Ziswiler <marcel@ziswiler.com> Tested-by: Marc Dietrich <marvin24@gmx.de> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-03pinctrl: tegra: Delete two error messages for a failed memory allocation in ↵Markus Elfring1-6/+3
tegra_pinctrl_probe() Omit extra messages for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-14pinctrl: tegra: explicitly request exclusive reset controlPhilipp Zabel1-1/+1
Commit a53e35db70d1 ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: linux-gpio@vger.kernel.org Cc: linux-tegra@vger.kernel.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29pinctrl: tegra: clean up modular vs. non-modular distinctionsPaul Gortmaker6-36/+18
None of the Kconfigs for any of these drivers are tristate, meaning that they currently are not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the drivers there is no doubt they are builtin-only. All drivers get similar changes, so they are handled in batch. We remove module.h from code that isn't doing anything modular at all; if they have __init sections, then replace it with init.h. A couple drivers have module_exit() code that is essentially orphaned, and so we remove that. Quite a few bool drivers (hence non-modular) are converted over to to builtin_platform_driver(). Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Pritesh Raithatha <praithatha@nvidia.com> Cc: Ashwini Ghuge <aghuge@nvidia.com> Cc: linux-gpio@vger.kernel.org Cc: linux-tegra@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-24pinctrl: tegra: xusb: Silence sparse warningsThierry Reding1-0/+4
Commit 53d2a715c240 ("phy: Add Tegra XUSB pad controller support") added a new driver for the XUSB pad controller that implements a more flexible devicetree binding. In order to preserve backwards compatibility the old driver can be probed if the obsolete bindings are detected. In order to hide the legacy code, these prototypes were defined in a header private to the new driver. This has the disadvantage of making the sparse code checker complain about the missing declarations when compiling the old driver and suggesting to make the functions static. Avoid these sparse warnings by adding local prototype declarations into the compatibility driver. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-29Merge tag 'pinctrl-v4.8-1' of ↵Linus Torvalds7-21/+15
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.8 kernel cycle. Nothing stands out as especially exiting: new drivers, new subdrivers, lots of cleanups and incremental features. Business as usual. New drivers: - New driver for Oxnas pin control and GPIO. This ARM-based chipset is used in a few storage (NAS) type devices. - New driver for the MAX77620/MAX20024 pin controller portions. - New driver for the Intel Merrifield pin controller. New subdrivers: - New subdriver for the Qualcomm MDM9615 - New subdriver for the STM32F746 MCU - New subdriver for the Broadcom NSP SoC. Cleanups: - Demodularization of bool compiled-in drivers. Apart from this there is just regular incremental improvements to a lot of drivers, especially Uniphier and PFC" * tag 'pinctrl-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (131 commits) pinctrl: fix pincontrol definition for marvell pinctrl: xway: fix typo Revert "pinctrl: amd: make it explicitly non-modular" pinctrl: iproc: Add NSP and Stingray GPIO support pinctrl: Update iProc GPIO DT bindings pinctrl: bcm: add OF dependencies pinctrl: ns2: remove redundant dev_err call in ns2_pinmux_probe() pinctrl: Add STM32F746 MCU support pinctrl: intel: Protect set wake flow by spin lock pinctrl: nsp: remove redundant dev_err call in nsp_pinmux_probe() pinctrl: uniphier: add Ethernet pin-mux settings sh-pfc: Use PTR_ERR_OR_ZERO() to simplify the code pinctrl: ns2: fix return value check in ns2_pinmux_probe() pinctrl: qcom: update DT bindings with ebi2 groups pinctrl: qcom: establish proper EBI2 pin groups pinctrl: imx21: Remove the MODULE_DEVICE_TABLE() macro Documentation: dt: Add new compatible to STM32 pinctrl driver bindings includes: dt-bindings: Add STM32F746 pinctrl DT bindings pinctrl: sunxi: fix nand0 function name for sun8i pinctrl: uniphier: remove pointless pin-mux settings for PH1-LD11 ...
2016-06-22pinctrl: tegra: Fix build dependencyAxel Lin1-1/+1
I got below build error: ERROR: "tegra_xusb_padctl_legacy_probe" [drivers/phy/tegra/phy-tegra-xusb.ko] undefined! with below build configuration: CONFIG_ARCH_TEGRA=y CONFIG_PINCTRL_TEGRA_XUSB=y CONFIG_PHY_TEGRA_XUSB=y The problem is below line in drivers/pinctrl/Makefile obj-$(CONFIG_PINCTRL_TEGRA) += tegra/ So even CONFIG_PINCTRL_TEGRA_XUSB=y is set, kbuild still does not compile the code in drivers/pinctrl/tegra folder if !CONFIG_PINCTRL_TEGRA. phy-tegra-xusb.c does not use any symbol from pinctrl-tegra.c, so build pinctrl-tegra.c only when CONFIG_PINCTRL_TEGRA is set. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-30pinctrl: tegra: Get rid of parked_regLaxman Dewangan1-1/+1
Remove the use of parked_reg and use parked_bit for to know whether field is supported or not. This is fix for the patch commit 1d18a3f0f0809f6c71f1f6e9e268ee904ce0b588 "pinctrl: tegra: avoid parked_reg and parked_bank Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-30Revert "Revert "pinctrl: tegra: avoid parked_reg and parked_bank""Linus Walleij7-20/+14
This reverts commit 0d5358330c20d50e52e3e65ff07a5db8007041fc.
2016-05-19Merge tag 'pinctrl-v4.7-1' of ↵Linus Torvalds8-30/+47
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This kernel cycle was quite calm when it comes to pin control and there is really just one major change, and that is the introduction of devm_pinctrl_register() managed resources. Apart from that linear development, details below. Core changes: - Add the devm_pinctrl_register() API and switch all applicable drivers to use it, saving lots of lines of code all over the place. New drivers: - driver for the Broadcom NS2 SoC - subdriver for the PXA25x SoCs - subdriver for the AMLogic Meson GXBB SoC Driver improvements: - the Intel Baytrail driver now properly supports pin control - Nomadik, Rockchip, Broadcom BCM2835 support the .get_direction() callback in the GPIO portions - continued development and stabilization of several SH-PFC SoC subdrivers: r8a7795, r8a7790, r8a7794 etc" * tag 'pinctrl-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (85 commits) Revert "pinctrl: tegra: avoid parked_reg and parked_bank" pinctrl: meson: Fix eth_tx_en bit index pinctrl: tegra: avoid parked_reg and parked_bank pinctrl: tegra: Correctly check the supported configuration pinctrl: amlogic: Add support for Amlogic Meson GXBB SoC pinctrl: rockchip: fix pull setting error for rk3399 pinctrl: stm32: Implement .pin_config_dbg_show() pinctrl: nomadik: hide nmk_gpio_get_mode when unused pinctrl: ns2: rename pinctrl_utils_dt_free_map pinctrl: at91: Merge clk_prepare and clk_enable into clk_prepare_enable pinctrl: at91: Make at91_gpio_template const pinctrl: baytrail: fix some error handling in debugfs pinctrl: ns2: add pinmux driver support for Broadcom NS2 SoC pinctrl: sirf/atlas7: trivial fix of spelling mistake on flagged pinctrl: sh-pfc: Kill unused variable in sh_pfc_remove() pinctrl: nomadik: implement .get_direction() pinctrl: nomadik: use BIT() with offsets consequently pinctrl: exynos5440: Use off-stack memory for pinctrl_gpio_range pinctrl: zynq: Use devm_pinctrl_register() for pinctrl registration pinctrl: u300: Use devm_pinctrl_register() for pinctrl registration ...
2016-05-13Revert "pinctrl: tegra: avoid parked_reg and parked_bank"Linus Walleij7-14/+20
This reverts commit 1d18a3f0f0809f6c71f1f6e9e268ee904ce0b588.
2016-05-11pinctrl: tegra: avoid parked_reg and parked_bankLaxman Dewangan7-20/+14
NVIDIA's Tegra210 support the park bit to make pinmux configuration enable/disable. If parked bit is 1 then configuration does not apply and if it is 0 then pinmux configuration applies. This is to support to avoid any glitch in pinmux configurations. The parked bit is part of mux register and mux bank and hence it is not required to have member for the parked_reg and parked bank very similar to other bit field of the same register. Remove the need of the parked register and parked bank and get whether parked function supported or not by parked_bit. This is to make the parked bit handling same as other fields of mux registers. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11pinctrl: tegra: Correctly check the supported configurationLaxman Dewangan1-1/+1
The pincontrol registers of Tegra chips has multiple filed per registers. There is two type of registers mux and drive. All configurations belongs to one of these registers. If any configurations are supported then <config>_bit is set to bit position of these registers otherwise -1 to not support it. The member is defined as s32 <config>_bit:6; So if config is not supported ifor given SoC then it is set to -1 in soc pinmmux table. In common driver code, to find out that given config is supported or not, it is checked as: s8 bit = <config>_bit; if (bit > 31) { /* Not supported config */ } But in this case, bit is s8 and hence for non supporting it is -1. Correct the check as: if (bit < 0) { /* Not supported config */ } Fixes: e4c02dced975cb ("pinctrl: tegra: use signed bitfields for optional fields") Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-29phy: Add Tegra XUSB pad controller supportThierry Reding1-16/+4
Add a new driver for the XUSB pad controller found on NVIDIA Tegra SoCs. This hardware block used to be exposed as a pin controller, but it turns out that this isn't a good fit. The new driver and DT binding much more accurately describe the hardware and are more flexible in supporting new SoC generations. Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Thierry Reding <treding@nvidia.com>