Age | Commit message (Collapse) | Author | Files | Lines |
|
Newer Lenovo Yogas and Legions with 60Hz/90Hz displays send a wmi event
when Fn + R is pressed. This is intended for use to switch between the
two refresh rates.
The Fn + R key was incorrectly assigned to KEY_DISPLAYTOGGLE because it
is used to toggle the display on and off.
Map Fn + R key to the KEY_REFRESH_RATE_TOGGLE event code.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/8fd36f0f016dde700396d8afaba1979d5dbc30a1.1710065750.git.soyer@irl.hu
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
According to the manual, Fn+R adjusts the display refresh rate.
Map Fn+R to KEY_DISPLAYTOGGLE.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/0cdbc0e6eb65e160384ae0ed152e7de3ded1d9d5.1707604991.git.soyer@irl.hu
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
max_brightness is used in ideapad_kbd_bl_brightness_get() before it's set,
causing ideapad_kbd_bl_brightness_get() to return -EINVAL sometimes.
Fixes: ecaa1867b524 ("platform/x86: ideapad-laptop: Add support for keyboard backlights using KBLC ACPI symbol")
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231114114055.6220-2-stuart.a.hayhurst@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
ACPI symbol
Newer Lenovo laptops seem to use the KBLC symbol to control the backlight
Add support for handling the keyboard backlight on these devices
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Link: https://lore.kernel.org/r/20230827161940.485200-1-stuart.a.hayhurst@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
14s Yoga ITL
The Lenovo Thinkbook 14s Yoga ITL has 4 new symbols/shortcuts on their
F9-F11 and PrtSc keys:
F9: Has a symbol of a head with a headset, the manual says "Service key"
F10: Has a symbol of a telephone horn which has been picked up from the
receiver, the manual says: "Answer incoming calls"
F11: Has a symbol of a telephone horn which is resting on the receiver,
the manual says: "Reject incoming calls"
PrtSc: Has a symbol of a siccor and a dashed ellipse, the manual says:
"Open the Windows 'Snipping' Tool app"
This commit adds support for these 4 new hkey events.
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Link: https://lore.kernel.org/r/20230819-lenovo_keys-v1-1-9d34eac88e0a@apitzsch.eu
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- AMD PMC and PMF drivers:
- Numerous bugfixes
- Intel Speed Select Technology (ISST):
- TPMI (Topology Aware Register and PM Capsule Interface) support
for ISST support on upcoming processor models
- Various other improvements / new hw support
- tools/intel-speed-select: TPMI support + other improvements
- Intel In Field Scan (IFS):
- Add Array Bist test support
- New drivers:
- intel_bytcrc_pwrsrc Crystal Cove PMIC pwrsrc / reset-reason driver
- lenovo-ymc Yoga Mode Control driver for reporting SW_TABLET_MODE
- msi-ec Driver for MSI laptop EC features like battery charging limits
- apple-gmux:
- Support for new MMIO based models (T2 Macs)
- Honor acpi_backlight= auto-detect-code + kernel cmdline option
to switch between gmux and apple_bl backlight drivers and remove
own custom handling for this
- x86-android-tablets: Refactor / cleanup + new hw support
- Miscellaneous other cleanups / fixes
* tag 'platform-drivers-x86-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (178 commits)
platform/x86: x86-android-tablets: Add accelerometer support for Yoga Tablet 2 1050/830 series
platform/x86: x86-android-tablets: Add "yogabook-touch-kbd-digitizer-switch" pdev for Lenovo Yoga Book
platform/x86: x86-android-tablets: Add Wacom digitizer info for Lenovo Yoga Book
platform/x86: x86-android-tablets: Update Yoga Book HiDeep touchscreen comment
platform/x86: thinkpad_acpi: Fix Embedded Controller access on X380 Yoga
platform/x86/intel/sdsi: Change mailbox timeout
platform/x86/intel/pmt: Ignore uninitialized entries
platform/x86: amd: pmc: provide user message where s0ix is not supported
platform/x86/amd: pmc: Fix memory leak in amd_pmc_stb_debugfs_open_v2()
mlxbf-bootctl: Add sysfs file for BlueField boot fifo
platform/x86: amd: pmc: Remove __maybe_unused from amd_pmc_suspend_handler()
platform/x86/intel/pmc/mtl: Put GNA/IPU/VPU devices in D3
platform/x86/amd: pmc: Move out of BIOS SMN pair for STB init
platform/x86/amd: pmc: Utilize SMN index 0 for driver probe
platform/x86/amd: pmc: Move idlemask check into `amd_pmc_idlemask_read`
platform/x86/amd: pmc: Don't dump data after resume from s0i3 on picasso
platform/x86/amd: pmc: Hide SMU version and program attributes for Picasso
platform/x86/amd: pmc: Don't try to read SMU version on Picasso
platform/x86/amd/pmf: Move out of BIOS SMN pair for driver probe
platform/x86: intel-uncore-freq: Add client processors
...
|
|
These functions will be used by a driver written by Gergo Koteles to
detect the tablet mode switch in Lenovo Yoga laptops. These changes were
discussed in review of that patch.
This is the minimal set of functions needed in that driver, there are
several more small functions left in the ACPI Helpers section in
ideapad-laptop.c. The only change is the functions are now marked inline
as requested in the review comments.
Signed-off-by: Andrew Kallmeyer <kallmeyeras@gmail.com>
Link: https://lore.kernel.org/r/20221004214332.35934-1-soyer@irl.hu/
Tested-by: André Apitzsch <git@apitzsch.eu>
Link: https://lore.kernel.org/r/20230329014559.44494-2-kallmeyeras@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Commit 5829f8a897e4 ("platform/x86: ideapad-laptop: Send
KEY_TOUCHPAD_TOGGLE on some models") made ideapad-laptop send
KEY_TOUCHPAD_TOGGLE when we receive an ACPI notify with VPC event bit 5 set
and the touchpad-state has not been changed by the EC itself already.
This was done under the assumption that this would be good to do to make
the touchpad-toggle hotkey work on newer models where the EC does not
toggle the touchpad on/off itself (because it is not routed through
the PS/2 controller, but uses I2C).
But it turns out that at least some models, e.g. the Yoga 7-15ITL5 the EC
triggers an ACPI notify with VPC event bit 5 set on resume, which would
now cause a spurious KEY_TOUCHPAD_TOGGLE on resume to which the desktop
environment responds by disabling the touchpad in software, breaking
the touchpad (until manually re-enabled) on resume.
It was never confirmed that sending KEY_TOUCHPAD_TOGGLE actually improves
things on new models and at least some new models like the Yoga 7-15ITL5
don't have a touchpad on/off toggle hotkey at all, while still sending
ACPI notify events with VPC event bit 5 set.
So it seems best to revert the change to send KEY_TOUCHPAD_TOGGLE when
receiving an ACPI notify events with VPC event bit 5 and the touchpad
state as reported by the EC has not changed.
Note this is not a full revert the code to cache the last EC touchpad
state is kept to avoid sending spurious KEY_TOUCHPAD_ON / _OFF events
on resume.
Fixes: 5829f8a897e4 ("platform/x86: ideapad-laptop: Send KEY_TOUCHPAD_TOGGLE on some models")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217234
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230330194644.64628-1-hdegoede@redhat.com
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230302144732.1903781-15-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
set_fn_lock_led_list[]
The Lenovo Legion 5 15ARH05 needs ideapad-laptop to call SALS_FNLOCK_ON /
SALS_FNLOCK_OFF on Fn-lock state change to get the LED in the Fn key to
correctly reflect the Fn-lock state.
Add a DMI match for the Legion 5 15ARH05 to the set_fn_lock_led_list[]
table for this.
Fixes: 81a5603a0f50 ("platform/x86: ideapad-laptop: Fix interrupt storm on fn-lock toggle on some Yoga laptops")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221215154357.123876-1-hdegoede@redhat.com
|
|
Remove the ACPI-HID + DMI-id deny-lists for touchpad_ctrl_via_ec and
instead make it a module option which defaults to false.
The touchpad sysfs attribute allowing directly writing VPCCMD_W_TOUCHPAD
from userspace has been leading to a lot of bug-reports / patches adding
both ACPI HID + dmi-id based deny-lists for it which then need to be
expanded all the time going forward leading to a high maintenance load.
At the same time the touchpad sysfs attribute is not a standard Linux
userspace API. So it is not used in standard desktop-enviroments, instead
it is only used in the following 2 rare circumstances:
1. Ideapad specific control-panel like applets
2. Custom scripts written by users
For 1. these applets need to already deal with the touchpad sysfs attr
sometimes not being there because of the existing deny lists so hiding
it be default should not cause an issue; and most desktop environments
already have a touchpad-disable option in their native control-panel,
so having an ideapad specific toggle for this is not necessary.
For 2. since these users are already customizing their systems they
can add the module option if they want to keep using the touchpad
sysfs attribute.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20221117110244.67811-7-hdegoede@redhat.com
|
|
Commit d69cd7eea93e ("platform/x86: ideapad-laptop: Disable touchpad_switch
for ELAN0634") from Janary 2021 added a flag hiding the touchpad sysfs-attr
and disabling ideapad_sync_touchpad_state() because some devices
"do not use EC to switch touchpad".
At the same time this added a write(VPCCMD_W_TOUCHPAD, 1) call at probe
time on these same devices. This seems to be copied from the rfkill code
which does something similar when hw rfkill support is disabled.
But for the rfkill code this is known to be necessary on some models,
where as for the touchpad control no motivation is given for doing this
and prior to this patch there were no reports of needing to do this.
So this seems unnecessary; and it is best to avoid poking the hardware
unnecessary to avoid unwanted side effects, so remove this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20221117110244.67811-6-hdegoede@redhat.com
|
|
On recent Ideapad models the EC does not control the touchpad at all,
so instead of sending KEY_TOUCHPAD_ON/ _OFF on touchpad toggle hotkey
events, ideapad-laptop should send KEY_TOUCHPAD_TOGGLE and let userspace
handle the toggling.
Check for this by checking if the value read from VPCCMD_R_TOUCHPAD
actually changes when receiving a touchpad-toggle hotkey event; and
if it does not change send KEY_TOUCHPAD_TOGGLE to userspace to let
userspace enable/disable the touchpad in software.
Note this also drops the priv->features.touchpad_ctrl_via_ec check from
ideapad_sync_touchpad_state() so that KEY_TOUCHPAD_TOGGLE will be send
on laptops where this is not set too. This can be safely dropped now
because the i8042_command(I8042_CMD_AUX_ENABLE/_DISABLE) call is now
guarded by its own feature flag.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20221117110244.67811-5-hdegoede@redhat.com
|
|
Recently there have been multiple patches to disable the ideapad-laptop's
touchpad control code, because it is causing issues on various laptops:
Commit d69cd7eea93e ("platform/x86: ideapad-laptop: Disable touchpad_switch for ELAN0634")
Commit a231224a601c ("platform/x86: ideapad-laptop: Disable touchpad_switch")
The turning on/off of the ps2 aux port was added specifically for
the IdeaPad Z570, where the EC does toggle the touchpad on/off LED and
toggles the value returned by reading VPCCMD_R_TOUCHPAD, but it does not
actually turn on/off the touchpad.
The ideapad-laptop code really should not be messing with the i8042
controller on all devices just for this special case.
Add a new ctrl_ps2_aux_port flag set based on a DMI based allow-list
for devices which need this workaround, populating it with just
the Ideapad Z570 for now.
This also adds a module parameter so that this behavior can easily
be enabled on other models which may need it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20221117110244.67811-4-hdegoede@redhat.com
|
|
The sending of KEY_TOUCHPAD* events is causing spurious touchpad OSD
showing on resume.
Disable the sending of events on probe / resume to fix this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20221117110244.67811-3-hdegoede@redhat.com
|
|
Add an error exit for read_ec_data() failing instead of putting the main
body in an if (success) block.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20221117110244.67811-2-hdegoede@redhat.com
|
|
The event data of the WMI event 0xD0, which is assumed to be the
fn_lock, is used to indicate several special keys on newer Yoga 7/9
laptops.
The notify_id 0xD0 is non-unique in the DSDT of the Yoga 9 14IAP7, this
causes wmi_get_event_data() to report wrong values.
Port the ideapad-laptop WMI code to the wmi bus infrastructure which
does not suffer from the shortcomings of wmi_get_event_data().
Signed-off-by: Philipp Jungkamp <p.jungkamp@gmx.net>
Link: https://lore.kernel.org/r/20221116110647.3438-1-p.jungkamp@gmx.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Later IdeaPads report various things in last 8 bits of _CFG, at least
5 of them represent supported on-screen-displays. Add those bit numbers
to the enum, and use CFG_OSD_ as prefix of their names. Also expose
the values of these bits to debugfs, since they can be useful.
Signed-off-by: Eray Orçunus <erayorcunus@gmail.com>
Acked-by: Ike Panhc <ike.pan@canonical.com>
Link: https://lore.kernel.org/r/20221029120311.11152-5-erayorcunus@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Last 8 bit of _CFG started being used in later IdeaPads, thus 30th bit
doesn't always show whether device supports touchpad or touchpad switch.
Remove checking bit 30 of _CFG, so older IdeaPads like S10-3 can switch
touchpad again via touchpad attribute.
This reverts commit b3ed1b7fe378 ("platform/x86: ideapad-laptop: check for
touchpad support in _CFG").
Signed-off-by: Eray Orçunus <erayorcunus@gmail.com>
Acked-by: Ike Panhc <ike.pan@canonical.com>
Link: https://lore.kernel.org/r/20221029120311.11152-2-erayorcunus@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add module parameters to allow setting the hw_rfkill_switch and
set_fn_lock_led feature flags for testing these on laptops which are not
on the DMI-id based allow lists for these 2 flags.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221115193400.376159-1-hdegoede@redhat.com
|
|
Yoga laptops
Commit 3ae86d2d4704 ("platform/x86: ideapad-laptop: Fix Legion 5 Fn lock
LED") uses the WMI event-id for the fn-lock event on some Legion 5 laptops
to manually toggle the fn-lock LED because the EC does not do it itself.
However, the same WMI ID is also sent on some Yoga laptops. Here, setting
the fn-lock state is not valid behavior, and causes the EC to spam
interrupts until the laptop is rebooted.
Add a set_fn_lock_led_list[] DMI-id list and only enable the workaround to
manually set the LED on models on this list.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=212671
Cc: Meng Dong <whenov@gmail.com>
Signed-off-by: Arnav Rawat <arnavr3@illinois.edu>
Link: https://lore.kernel.org/r/12093851.O9o76ZdvQC@fedora
[hdegoede@redhat.com: Check DMI-id list only once and store the result]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Ideapads for "Lenovo Yoga 3 Pro 1370" and "ZhaoYang K4e-IML" do not
use EC to switch touchpad.
Reading VPCCMD_R_TOUCHPAD will return zero thus touchpad may be blocked
unexpectedly.
Signed-off-by: Manyi Li <limanyi@uniontech.com>
Link: https://lore.kernel.org/r/20221018095323.14591-1-limanyi@uniontech.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
ideapad_dytc_v4_allow_table[]
The Ideapad 5 15ITL05 uses DYTC version 4 for platform-profile
control. This has been tested successfully with the ideapad-laptop
DYTC version 5 code; Add the Ideapad 5 15ITL05 to the
ideapad_dytc_v4_allow_table[].
Fixes: 599482c58ebd ("platform/x86: ideapad-laptop: Add platform support for Ideapad 5 Pro 16ACH6-82L5")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213297
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220627130850.313537-1-hdegoede@redhat.com
|
|
Add an allow_v4_dytc module parameter to allow users to easily test if
DYTC version 4 platform-profiles work on their laptop.
Fixes: 599482c58ebd ("platform/x86: ideapad-laptop: Add platform support for Ideapad 5 Pro 16ACH6-82L5")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213297
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220623115914.103001-1-hdegoede@redhat.com
|
|
The ACPI_HANDLE() macro is a wrapper arond the ACPI_COMPANION()
macro and the ACPI handle produced by the former comes from the
ACPI device object produced by the latter, so it is way more
straightforward to evaluate the latter directly instead of passing
the handle produced by the former to acpi_bus_get_device().
Modify ideapad_acpi_add() accordingly (no intentional functional
impact).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/8000884.T7Z3S40VBb@kreacher
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Adding support specifically for Ideapad 5 Pro 16ACH6-82L5 by adding a
allow list that can validate notebooks for which dytc_version
is less than 5, and seem to work fine at dytc_version 4. This code has
been tested to work properly on the specified system.
Signed-off-by: Kelly Anderson <kelly@xilka.com>
Link: https://lore.kernel.org/r/11840239.O9o76ZdvQC@comer.internal
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This patch fixes the bug 212671.
Althrough the Fn lock (Fn + Esc) works on Legion 5 (R7000P), its LED
light does not change with the state. This modification sets the Fn lock
state to its current value on receiving the wmi event
8FC0DE0C-B4E4-43FD-B0F3-8871711C1294 to update the LED state.
Signed-off-by: Meng Dong <whenov@gmail.com>
Link: https://lore.kernel.org/r/20210817171203.12855-1-whenov@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
VPC event bit 10 gets set on a Yoga 300-11IBR when the EC believes that the
device has changed between laptop/tent/stand/tablet mode.
The EC relies on getting angle info from 2 accelerometers through a special
windows service calling a DSM on the DUAL250E ACPI-device. Linux does not
do this, making the laptop/tent/stand/tablet mode info unreliable.
Ignore VPC event bit 10 to avoid the warnings triggered by the default case
in ideapad_acpi_notify().
Note that the plan for Linux is to have iio-sensor-proxy read the 2
accelerometers and have it provide info about which mode 360° hinges
2-in-1s to the rest of userspace:
https://gitlab.freedesktop.org/hadess/iio-sensor-proxy/-/issues/216
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210523172331.177834-1-hdegoede@redhat.com
|
|
"smbc" should be "sbmc". `eval_smbc()` incorrectly called
the SMBC ACPI method instead of SBMC. This resulted in
partial loss of functionality. Rectify that by calling
the correct ACPI method (SBMC), and also rename
methods and constants.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212985
Fixes: 0b765671cb80 ("platform/x86: ideapad-laptop: group and separate (un)related constants into enums")
Fixes: ff36b0d953dc ("platform/x86: ideapad-laptop: rework and create new ACPI helpers")
Cc: stable@vger.kernel.org # 5.12
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210507235333.286505-1-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The third parameter of dytc_cql_command should not be NULL since it will
be dereferenced immediately.
Fixes: ff36b0d953dc4 ("platform/x86: ideapad-laptop: rework and create new ACPI helpers")
Signed-off-by: Qiu Wenbo <qiuwenbo@kylinos.com.cn>
Acked-by: Ike Panhc <ike.pan@canonical.com>
Link: https://lore.kernel.org/r/20210428050636.8003-1-qiuwenbo@kylinos.com.cn
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Certain models have a so-called "always on USB charging" feature,
which enables USB charging even when the computer is turned off
or suspended, and which may be controlled/queried using the
SALS/HALS ACPI methods. Expose this functionality via a new device
attribute (usb_charging). Tested on: Lenovo YOGA 520-14IKB 80X8
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-28-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
On certain models it is possible to control/query the
keyboard backlight via the SALS/HALS ACPI methods. Add
support for that, and register an LED class device to expose
this functionality. Tested on: Lenovo YOGA 520-14IKB 80X8
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-27-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
to sysfs
Consumers can determine if the value of an attribute changed much more
easily if changes are broadcast using sysfs_notify(), so utilize it.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-26-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fix all checkpatch warnings. Reorder variable definitions from
longest to shortest. Add more whitespaces for better readability.
Rename variables named `ret` to `err` where appropriate. Reorder
sysfs attributes show/store callbacks and the `ideapad_attributes`
array in lexicographic order. And other minor formatting changes.
No significant functional changes are intended.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-25-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The touchpad can be enabled/disabled via this attribute on a Lenovo
Yoga 520-14IKB. Allow writing as it provides legitimate functionality.
This reverts commit 7f363145992cebf4ea760447f1cfdf6f81459683.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-24-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Minor formatting changes. Use seq_puts() where possible.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-23-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Remove conservation mode reporting since it is already reported via
the appropriate device attribute, and its state can be deduced from
the value of GBMD. Add the return value of the GBMD and HALS ACPI
methods to the output. Use seq_puts() where possible.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-22-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Bit 30 of _CFG is set if the device has a touchpad, check that
in is_visible() for the touchpad attribute. Show 'touchpad', if
supported, in the list of capabilities in the 'cfg' debugfs file.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-21-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Bit 9 in the return value of the HALS ACPI method is set if
Fn-lock is supported. Change ideapad_check_features() to check it.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-20-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Store the supported features in the driver private
data, and modify the is_visible() callback to use it,
and create ideapad_check_features() to populate it.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-19-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Create dedicated helper functions for accessing the main ACPI methods:
GBMD, SMBC, HALS, SALS; and utilize them. Use `unsigned long` consistently
in every ACPI helper wherever possible. Change names to better express
purpose. Do not assign values to output parameters in case of failure.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-18-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
enums
Group and rename constants depending on which ACPI interface
they pertain to, and rename CFG_X constants to CFG_CAP_X.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-17-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Do not handle zero length buffer separately. Use kstrtouint() instead
of sscanf(). Use kstrtobool() in store_ideapad_cam(). These
introduce minor ABI changes, but it is expected that no users rely
on the previous behavior. Thus the change is deemed justifed.
Additionally, use `!!` to convert to `int` and use the "%d" format
specifier in sysfs_emit() for boolean-like attributes.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-16-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
attributes' show() callback
Consumers can differentiate an error from a successful read much more
easily if the read() call fails with an appropriate errno instead of
returning a magic string like "-1". This introduces an ABI change, but
not many users are expected to be relying on the previous behavior,
and this change makes this module conforming to the standard behavior
that sysfs attribute show/store callbacks return an appropriate
errno in case of failure. Thus the ABI breakage is deemed justified.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-15-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
failure
ACPI helpers returned -1 in case of failure. Convert these
functions to return appropriate error codes, and convert
their users to propagate these error codes accordingly.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-14-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
display log messages
Having the device name in the log message makes it easier to determine
in the context of which device the message was printed, so utilize the
appropriate variants of dev_{err,warn,...} when printing log messages.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-12-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
hand-crafted formula
The current code used a hand-crafted formula to convert milliseconds to
jiffies, replace it with the msecs_to_jiffies() function. Furthermore,
use a while loop instead of for loop for shorter lines and simplicity.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-11-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
event processing
The current code used the combination of a for loop + test_bit,
which can be simplified using for_each_set_bit(), so utilize that.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-10-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Use kobj_to_dev() instead of open-coding the container_of() macro.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-9-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Use device_{add,remove}_group instead of sysfs_{add,remove}_group.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-8-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|