| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Xiaomi pad2 RGB LED fwnode updates:
1. Set "label" instead "function" to change the LED classdev name from
"rgb:indicator" to "mipad2:rgb:indicator" to match the usual
triplet name format for LED classdevs.
2. Set the trigger to the new "bq27520-0-charging-orange-full-green"
powersupply trigger type for multi-color LEDs.
3. Put the fwnode link for red before green in ktd2026_node_group[] so that
multi_index becomes "red green blue".
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240504164105.114017-8-hdegoede@redhat.com
|
|
Pass a struct device pointer for x86_android_tablet_device to the board
specific init() functions, so that these functions can use this for
e.g. devm_*() functions.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240509141207.63570-1-hdegoede@redhat.com
|
|
Add new ACPI ID AMDI000B used by upcoming AMD platform to the PMC
supported list of devices.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240510103946.877307-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add new ACPI ID AMDI0105 used by upcoming AMD platform to the PMF
supported list of devices.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240510103519.876646-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The P2SB could get an invalid BAR from the BIOS, and that won't be fixed
up until pcibios_assign_resources(), which is an fs_initcall().
- Move p2sb_fs_init() to an fs_initcall_sync(). This is still early
enough to avoid a race with any dependent drivers.
- Add a check for IORESOURCE_UNSET in p2sb_valid_resource() to catch
unset BARs going forward.
- Return error values from p2sb_fs_init() so that the 'initcall_debug'
cmdline arg provides useful data.
Signed-off-by: Ben Fradella <bfradell@netapp.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Klara Modin <klarasmodin@gmail.com>
Reviewed-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20240509164905.41016-1-bcfradella@proton.me
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
SST SST-BF and SST-TF can be enabled/disabled per SST-PP level. So return
a mask of all levels, where the feature is supported, instead of just for
level 0.
Since the return value returns all levels mask, not just level 0, update
API version.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240430221052.15825-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
As suggested by Documentation/filesystems/sysfs.rst sysfs_emit() should be
used when formatting the value to be returned to user space.
Signed-off-by: Szilard Fabian <szfabian@bluemarch.art>
Link: https://lore.kernel.org/r/20240428192548.113261-1-szfabian@bluemarch.art
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Update Lunar Lake lpm maps to include S0ix blocker information.
Add Lunar Lake blocker maps to enable S0ix blocker show in pmc
core debugfs.
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240426002752.2504282-4-xi.pardee@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
S0ix blocker counter is available in PWRM space. Add support to
read and show S0ix blocker counter value through debugfs.
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240426002752.2504282-3-xi.pardee@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Update Lunar Lake signal status map. This status map has been updated
since the map was merged. This patch updates the signal status map to
the lastest version.
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240426002752.2504282-2-xi.pardee@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add missing MODULE_DESCRIPTION() to ISST modules.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240423204619.3946901-11-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add dev_fmt for formatting log messages.
No functional impact is expected.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240423204619.3946901-10-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Use in_range() macro to simplify range check.
No functional impact is expected.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240423204619.3946901-9-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
A partitioned system has two different PCI VSEC devices per package.
A non-partitioned device has only one PCI VSEC device per package.
The current implementation only supports non partitioned systems.
Each partition maps a set of power domains. Other than reading from
different MMIO regions, there is no change in the SST functionality.
The scope of SST control is still per power domain. Hence user space
does not need to be aware of existence of partitions.
With partitions, existing per package information defined using struct
tpmi_sst_struct is enhanced to store information for both partitions. A
mapping function map_partition_power_domain_id() is introduced, which
maps to correct partition and index. This mapping function is called
in get_instance() and isst_if_clos_assoc(), before indexing into
tpmi_sst_struct->power_domain_info[].
The TPMI core platform info provides partition id and compute die ID
mask for each partition. Use this information to order power domains,
so that compute dies are presented before IO dies to match hardware
defined compute die ID for each CPU.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240423204619.3946901-8-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Instead of long lines for assignment to tpmi_sst->power_domain_info, use
a local variable pd_info and assign later. Also move the assignment
of number of resources after the assignment of pd_info.
No functional change is expected.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240423204619.3946901-7-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Define a local variable for &auxdev->dev and use to shorten length of
lines. No functional change is done.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240423204619.3946901-6-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
TPMI information header added additional fields in version 2. Some of the
reserved fields in version 1 are used to define new fields.
Parse new fields and export as part of platform data. These fields include:
- PCI segment ID
- Partition ID of the package: If a package is represented by more than
one PCI device, then partition ID along with cdie_mask, describes the
scope. For example to update get/set properties for a compute die, one
of the PCI MMIO region is selected from the partition ID.
- cdie_mask: Mask of all compute dies in this partition.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240423204619.3946901-5-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Check the major version from TPMI information header and fail to load
driver if the version is not supported.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240423204619.3946901-3-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
When tpmi_process_info() returns error, fail to load the driver.
This can happen if call to ioremap() returns error.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: stable@vger.kernel.org # v6.3+
Link: https://lore.kernel.org/r/20240423204619.3946901-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The modpost script is not happy
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/x86/classmate-laptop.o
because there is a missing module description.
Add it to the module.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Link: https://lore.kernel.org/r/20240423161108.2636958-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add a new driver for the custom fast charging protocol found on Lenovo Yoga
Tablet 2 1380F / 1380L models.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240422131649.46002-1-hdegoede@redhat.com
|
|
Add a new driver for the MSI WMI Platform interface. The underlying
ACPI WMI interface supports many features, but so far only reading
of fan speed sensors is implemented.
The driver was reverse-engineered based on a user request to the
lm-sensors project, see the github issue for details.
The ACPI WMI interface used by this driver seems to use the same
embedded controller interface as the msi-ec driver, but supports
automatic discovery of supported machines without relying on a
DMI whitelist.
The driver was tested by the user who created the github issue.
Closes: https://github.com/lm-sensors/lm-sensors/issues/475
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240421191145.3189-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
acpi_send_ev is a bool and everywhere else true/false is used
to set it. Replace the one instance using 0 with false.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240429093446.130322-1-hdegoede@redhat.com
|
|
The hotkey combination Fn + G can be used to disable the trackpoint
doubletap feature on Windows. Add matching functionality for Linux.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Link: https://lore.kernel.org/r/20240417173124.9953-4-mpearson-lenovo@squebb.ca
[hdegoede@redhat.com: Adjust for switch to sparse-keymap keymaps]
[hdegoede@redhat.com: Do not log unknown event msg for doubletap when disabled]
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-25-hdegoede@redhat.com
|
|
New Lenovo platforms are adding the FN+N key to generate system debug
details that support can use for collecting important details on any
customer cases for Windows.
Add the infrastructure so we can do the same on Linux by sending
a KEY_VENDOR keycode to userspace.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Nitin Joshi <njoshi1@lenovo.com>
Link: https://lore.kernel.org/r/20240417173124.9953-3-mpearson-lenovo@squebb.ca
[hdegoede@redhat.com: Adjust for switch to sparse-keymap keymaps]
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-24-hdegoede@redhat.com
|
|
Lenovo trackpoints are adding the ability to generate a doubletap event.
This handles the doubletap event and sends the KEY_PROG4 event to
userspace. Despite the driver itself not using KEY_PROG1 - KEY_PROG3 this
still uses KEY_PROG4 because of some keys being remapped to KEY_PROG1 -
KEY_PROG3 by default by the upstream udev hwdb containing:
evdev:name:ThinkPad Extra Buttons:dmi:bvn*:bvr*:bd*:svnLENOVO*:pn*:*
...
KEYBOARD_KEY_17=prog1
KEYBOARD_KEY_1a=f20 # Microphone mute button
KEYBOARD_KEY_45=bookmarks
KEYBOARD_KEY_46=prog2 # Fn + PrtSc, on Windows: Snipping tool
KEYBOARD_KEY_4a=prog3 # Fn + Right shift, on Windows: No idea
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Link: https://lore.kernel.org/r/20240417173124.9953-2-mpearson-lenovo@squebb.ca
[hdegoede@redhat.com: Adjust for switch to sparse-keymap keymaps]
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-23-hdegoede@redhat.com
|
|
Modify how known_ev event is handled in preparation for adding new hkey
event range.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20240417173124.9953-1-mpearson-lenovo@squebb.ca
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-22-hdegoede@redhat.com
|
|
cloud keys
The X1 carbon 2014 / 2nd gen's adaptive keyboard top row's "Home" mode,
which is 1 of the 2 modes Linux supports, has clipping-tool and cloud
buttons which so far are not mapped.
I assume these were left as KEY_RESERVED because no suitable KEY_FOO codes
were available when support was added.
In the mean time we have gotten KEY_SELECTIVE_SCREENSHOT and this has been
used for the clipping-tool function under Fn + PrtSc on more traditional
ThinkPad keyboards already.
Finding a KEY_FOO code for the cloud key is harder looking at the symbol
it seems to refer to cloud-storage which made me think of file syncing,
or file transfer which has let me to pick KEY_XFER for this.
Note this is based on looking at a picture of the adaptive top row
in Home mode and has not been tested on an actual adaptive keyboard.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-21-hdegoede@redhat.com
|
|
Switch the hotkey keymap handling over to the sparse-keymap helpers,
there should be no functional changes from this.
Note all the mappings to KEY_UNKNOWN are removed since that is the default
behavior of sparse_keymap_report_event() for unknown scancodes.
Also drop the big comment about making changes to the keymaps since
the contents of that comment are mostly obsolete.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-20-hdegoede@redhat.com
|
|
The input core already filters out EV_KEY events for KEY_RESERVED,
remove the check for this in tpacpi_input_send_key() and rely
on the input core filtering instead.
Also change tpacpi_input_send_key() to only report the scancode
once instead of reporting it on both press and release. Together
these 2 changes make tpacpi_input_send_key() behave the same as
sparse_keymap_report_event().
The goal of this patch is to have a separate commit with
the slightly different behavior from sparse_keymap_report_event()
before switching over to using the sparse-keymap helpers.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-19-hdegoede@redhat.com
|
|
Change the default keymap to report the correct keycodes for the volume and
brightness keys. Reporting key events for these is already filtered out by
the hotkey_reserved_mask which masks these keys out of hotkey_user_mask at
initialization time, so there is no need to also map them to KEY_RESERVED.
This avoids users, who want these to be reported, having to also remap
the keycodes on top of overriding hotkey_user_mask to report these
and Linux userspace has already been overriding the KEY_RESERVED mappings
with the correct keycodes through udev/hwdb/60-keyboard.hwdb for years now.
Also drop hotkey_unmap() it was only used to dynamically map the brightness
keys to KEY_RESERVED and after removing that it has no remaining users.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-18-hdegoede@redhat.com
|
|
Change the hotkey_reserved_mask initialization to hardcode the list
of reserved keys. There are only a few reserved keys and the code to
iterate over the keymap will be removed when moving to sparse-keymaps.
Note only the 32 original hotkeys are affected by the hotkey_*_mask values:
if (i < sizeof(hotkey_reserved_mask)*8)
hotkey_reserved_mask |= 1 << i;
The (i < sizeof(hotkey_reserved_mask)*8) condition translates to (i < 32)
so this code only ever set bits in hotkey_reserved_mask for the 32 original
hotkeys. Therefor this patch does not set any bits in hotkey_reserved_mask
for the KEY_RESERVED mappings for the adaptive keyboard scancodes.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-17-hdegoede@redhat.com
|
|
Do not send ACPI netlink events for unknown hotkeys, to avoid userspace
starting to rely on them. Instead these should be added to the keymap to
send evdev events.
This should not cause a behavior change for existing laptop models since
all currently known 0x1xxx events have a mapping.
In hindsight the ACPI netlink events should have been suppressed for
the adaptive keyboard and extended hotkeys events too. But the kernel has
been sending ACPI netlink events for those for a long time now, so we
cannot just stop sending them without potentially causing issues for
existing users who may depend on these.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-16-hdegoede@redhat.com
|
|
tpacpi_input_send_key()
All callers of tpacpi_input_send_key() first call tpacpi_driver_event(),
move the tpacpi_driver_event() inside tpacpi_input_send_key() to avoid
code duplication.
For the original hotkey codes 0x1001 - 0x1020 tpacpi_driver_event() never
returns true. So the added "return true;" inside tpacpi_input_send_key()
never happens when called from tpacpi_hotkey_send_key() so behavior does
not change.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-15-hdegoede@redhat.com
|
|
tpacpi_input_send_key()
Move the mapping of hkey events to scancodes to tpacpi_input_send_key(),
this results in a nice cleanup and prepares things for adding sparse-keymap
support.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-14-hdegoede@redhat.com
|
|
hotkey_driver_event()
Both are only 1 / 2 lines and both only have 1 caller fold the contents
into tpacpi_hotkey_send_key() which is their single caller.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-13-hdegoede@redhat.com
|
|
Call tpacpi_driver_event() at the top of hotkey_notify_hotkey() for all
(orig / adaptive / extended) hotkey types, rather then having the orig
code path call tpacpi_input_send_key_masked() which calls it through
hotkey_driver_event() and having the adaptive / extended helpers call
it separately.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-12-hdegoede@redhat.com
|
|
tpacpi_input_send_key()
Move hotkey_user_mask check to tpacpi_input_send_key(), this is
a preparation patch for further refactoring.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-11-hdegoede@redhat.com
|
|
switch-case
Move the special handling (send_acpi_ev = false, hotkey_source_mask check)
for original hotkeys out of the switch-case in hotkey_notify_hotkey().
This is a preparation patch for further refactoring.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-10-hdegoede@redhat.com
|
|
tpacpi_driver_event()
Factor out the adaptive kbd non hotkey event handling into
adaptive_keyboard_change_row() and adaptive_keyboard_s_quickview_row()
helpers and move the handling of TP_HKEY_EV_DFR_CHANGE_ROW and
TP_HKEY_EV_DFR_S_QUICKVIEW_ROW to tpacpi_driver_event().
This groups all the handling of hotkey events which do not emit
a key press event together in tpacpi_driver_event().
This also drops the returning of false as known-event value when
adaptive_keyboard_get_mode() / adaptive_keyboard_set_mode() fail.
These functions already log an error on failure, returning false just
leads to an extra messgae being logged about the hkey event being
unknown, which is wrong as the event is not unknown.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-9-hdegoede@redhat.com
|
|
the event
tpacpi_driver_event() already only responds to hkey events which it knows
about. Make it return a bool and return true when it has handled the event.
This avoids the need to list TP_HKEY_EV_foo values to which it responds
both in its caller and in the function itself.
Instead callers can now call it unconditionally and check the return value.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-8-hdegoede@redhat.com
|
|
Modify hotkey_notify_hotkey() and it helpers to mostly directly operate
on hkey codes (TP_HKEY_EV_* returned by "MHKP") instead of on the 0 -
TPACPI_HOTKEY_MAP_LEN scancodes used for scancode -> keycode translation.
Keeping things in the hkey format as long a possible is a bit cleaner and
this patch prepares things for moving to sparse-keymaps.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-7-hdegoede@redhat.com
|
|
Use tpacpi_input_send_key() in adaptive_keyboard_hotkey_notify_hotkey()
instead of re-implementing it there.
Note this change will also result in a behavioral change, key presses on
the adaptive keyboard will now also send a EV_MSC event with the scancode,
just like all other hotkey presses already do. This is not a bug but
a feature.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20240424122834.19801-6-hdegoede@redhat.com
|
|
Setting ignore_acpi_ev to true has the same result as setting
send_acpi_ev to false, so there is no need to have both.
Drop ignore_acpi_ev.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-5-hdegoede@redhat.com
|
|
send_acpi_ev and ignore_acpi_ev are already initialized to true and false
respectively by hotkey_notify() before calling the various helpers. Drop
the needless re-initialization from the helpers.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20240424122834.19801-4-hdegoede@redhat.com
|
|
Provide a hotkey_poll_stop_sync() dummy implementation when
CONFIG_THINKPAD_ACPI_HOTKEY_POLL, so that the #ifdef-ery around
hotkey_poll_stop_sync() can be removed from hotkey_exit().
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-3-hdegoede@redhat.com
|
|
hotkey_exit() already takes the mutex around the hotkey_poll_stop_sync()
call, but not around the other calls.
commit 38831eaf7d4c ("platform/x86: thinkpad_acpi: use lockdep
annotations") has added lockdep_assert_held() checks to various hotkey
functions.
These lockdep_assert_held() checks fail causing WARN() backtraces in
dmesg due to missing locking in hotkey_exit(), fix this.
Fixes: 38831eaf7d4c ("platform/x86: thinkpad_acpi: use lockdep annotations")
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-2-hdegoede@redhat.com
|
|
sprintf()
As Documentation/filesystems/sysfs.rst suggested,
show() should only use sysfs_emit() or sysfs_emit_at() when formatting
the value to be returned to user space.
Signed-off-by: yunshui <jiangyunshui@kylinos.cn>
Reviewed-by: Ai Chao <aichao@kylinos.cn>
Link: https://lore.kernel.org/r/20240422062915.3393480-1-jiangyunshui@kylinos.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
sprintf()
As Documentation/filesystems/sysfs.rst suggested,
show() should only use sysfs_emit() or sysfs_emit_at() when formatting
the value to be returned to user space.
Signed-off-by: yunshui <jiangyunshui@kylinos.cn>
Reviewed-by: Ai Chao <aichao@kylinos.cn>
Link: https://lore.kernel.org/r/20240419064106.2396705-1-jiangyunshui@kylinos.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
As Documentation/filesystems/sysfs.rst suggested,
show() should only use sysfs_emit() or sysfs_emit_at() when formatting
the value to be returned to user space.
Signed-off-by: yunshui <jiangyunshui@kylinos.cn>
Reviewed-by: Ai Chao <aichao@kylinos.cn>
Link: https://lore.kernel.org/r/20240419063649.2396461-1-jiangyunshui@kylinos.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
