summaryrefslogtreecommitdiff
path: root/drivers/ptp
AgeCommit message (Collapse)AuthorFilesLines
2022-01-06net: fix SOF_TIMESTAMPING_BIND_PHC to work with multiple socketsMiroslav Lichvar1-5/+5
When multiple sockets using the SOF_TIMESTAMPING_BIND_PHC flag received a packet with a hardware timestamp (e.g. multiple PTP instances in different PTP domains using the UDPv4/v6 multicast or L2 transport), the timestamps received on some sockets were corrupted due to repeated conversion of the same timestamp (by the same or different vclocks). Fix ptp_convert_timestamp() to not modify the shared skb timestamp and return the converted timestamp as a ktime_t instead. If the conversion fails, return 0 to not confuse the application with timestamps corresponding to an unexpected PHC. Fixes: d7c088265588 ("net: socket: support hardware timestamp conversion to PHC bound") Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Cc: Yangbo Lu <yangbo.lu@nxp.com> Cc: Richard Cochran <richardcochran@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14net_tstamp: add new flag HWTSTAMP_FLAG_BONDED_PHC_INDEXHangbin Liu1-4/+0
Since commit 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device") the user could get bond active interface's PHC index directly. But when there is a failover, the bond active interface will change, thus the PHC index is also changed. This may break the user's program if they did not update the PHC timely. This patch adds a new hwtstamp_config flag HWTSTAMP_FLAG_BONDED_PHC_INDEX. When the user wants to get the bond active interface's PHC, they need to add this flag and be aware the PHC index may be changed. With the new flag. All flag checks in current drivers are removed. Only the checking in net_hwtstamp_validate() is kept. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18ptp: ocp: Fix a couple NULL vs IS_ERR() checksDan Carpenter1-4/+5
The ptp_ocp_get_mem() function does not return NULL, it returns error pointers. Fixes: 773bda964921 ("ptp: ocp: Expose various resources on the timecard.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-13ptp: ptp_clockmatrix: repair non-kernel-doc commentRandy Dunlap1-4/+1
Do not use "/**" to begin a comment that is not in kernel-doc format. Prevents this docs build warning: drivers/ptp/ptp_clockmatrix.c:1679: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Maximum absolute value for write phase offset in picoseconds Then remove the kernel-doc-like function parameter descriptions since they don't add any useful info. (suggested by Jakub) Fixes: 794c3dffacc16 ("ptp: ptp_clockmatrix: Add support for FW 5.2 (8A34005)") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Min Li <min.li.xe@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20211111155034.29153-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-28ptp: fix code indentation issuesCarlos Llamas1-3/+3
This fixes the following checkpatch.pl errors: ERROR: code indent should use tabs where possible +^I if (ptp->pps_source)$ ERROR: code indent should use tabs where possible +^I pps_unregister_source(ptp->pps_source);$ ERROR: code indent should use tabs where possible +^I kthread_destroy_worker(ptp->kworker);$ Fixes: 4225fea1cb28 ("ptp: Fix possible memory leak in ptp_clock_register()") Signed-off-by: Carlos Llamas <cmllamas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-8/+12
Lots of simnple overlapping additions. With a build fix from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21ptp: free 'vclock_index' in ptp_clock_release()Yang Yingliang1-4/+1
'vclock_index' is accessed from sysfs, it shouled be freed in release function, so move it from ptp_clock_unregister() to ptp_clock_release(). Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20ptp: Fix possible memory leak in ptp_clock_register()Yang Yingliang1-4/+11
I got memory leak as follows when doing fault injection test: unreferenced object 0xffff88800906c618 (size 8): comm "i2c-idt82p33931", pid 4421, jiffies 4294948083 (age 13.188s) hex dump (first 8 bytes): 70 74 70 30 00 00 00 00 ptp0.... backtrace: [<00000000312ed458>] __kmalloc_track_caller+0x19f/0x3a0 [<0000000079f6e2ff>] kvasprintf+0xb5/0x150 [<0000000026aae54f>] kvasprintf_const+0x60/0x190 [<00000000f323a5f7>] kobject_set_name_vargs+0x56/0x150 [<000000004e35abdd>] dev_set_name+0xc0/0x100 [<00000000f20cfe25>] ptp_clock_register+0x9f4/0xd30 [ptp] [<000000008bb9f0de>] idt82p33_probe.cold+0x8b6/0x1561 [ptp_idt82p33] When posix_clock_register() returns an error, the name allocated in dev_set_name() will be leaked, the put_device() should be used to give up the device reference, then the name will be freed in kobject_cleanup() and other memory will be freed in ptp_clock_release(). Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: a33121e5487b ("ptp: fix the race between the release of ptp_clock and cdev") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-15ptp: fix error print of ptp_kvm on X86_64 platformKele Huang1-2/+2
Commit a86ed2cfa13c5 ("ptp: Don't print an error if ptp_kvm is not supported") fixes the error message print on ARM platform by only concerning about the case that the error returned from kvm_arch_ptp_init() is not -EOPNOTSUPP. Although the ARM platform returns -EOPNOTSUPP if ptp_kvm is not supported while X86_64 platform returns -KVM_EOPNOTSUPP, both error codes share the same value 95. Actually kvm_arch_ptp_init() on X86_64 platform can return three kinds of errors (-KVM_ENOSYS, -KVM_EOPNOTSUPP and -KVM_EFAULT). The problem is that -KVM_EOPNOTSUPP is masked out and -KVM_EFAULT is ignored among them. This patch fixes this by returning them to ptp_kvm_init() respectively. Signed-off-by: Kele Huang <huangkele@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-7/+3
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-07Merge tag 'net-5.15-rc5' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from xfrm, bpf, netfilter, and wireless. Current release - regressions: - xfrm: fix XFRM_MSG_MAPPING ABI breakage caused by inserting a new value in the middle of an enum - unix: fix an issue in unix_shutdown causing the other end read/write failures - phy: mdio: fix memory leak Current release - new code bugs: - mlx5e: improve MQPRIO resiliency against bad configs Previous releases - regressions: - bpf: fix integer overflow leading to OOB access in map element pre-allocation - stmmac: dwmac-rk: fix ethernet on rk3399 based devices - netfilter: conntrack: fix boot failure with nf_conntrack.enable_hooks=1 - brcmfmac: revert using ISO3166 country code and 0 rev as fallback - i40e: fix freeing of uninitialized misc IRQ vector - iavf: fix double unlock of crit_lock Previous releases - always broken: - bpf, arm: fix register clobbering in div/mod implementation - netfilter: nf_tables: correct issues in netlink rule change event notifications - dsa: tag_dsa: fix mask for trunked packets - usb: r8152: don't resubmit rx immediately to avoid soft lockup on device unplug - i40e: fix endless loop under rtnl if FW fails to correctly respond to capability query - mlx5e: fix rx checksum offload coexistence with ipsec offload - mlx5: force round second at 1PPS out start time and allow it only in supported clock modes - phy: pcs: xpcs: fix incorrect CL37 AN sequence, EEE disable sequence Misc: - xfrm: slightly rejig the new policy uAPI to make it less cryptic" * tag 'net-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits) net: prefer socket bound to interface when not in VRF iavf: fix double unlock of crit_lock i40e: Fix freeing of uninitialized misc IRQ vector i40e: fix endless loop under rtnl dt-bindings: net: dsa: marvell: fix compatible in example ionic: move filter sync_needed bit set gve: report 64bit tx_bytes counter from gve_handle_report_stats() gve: fix gve_get_stats() rtnetlink: fix if_nlmsg_stats_size() under estimation gve: Properly handle errors in gve_assign_qpl gve: Avoid freeing NULL pointer gve: Correct available tx qpl check unix: Fix an issue in unix_shutdown causing the other end read/write failures net: stmmac: trigger PCS EEE to turn off on link down net: pcs: xpcs: fix incorrect steps on disable EEE netlink: annotate data races around nlk->bound net: pcs: xpcs: fix incorrect CL37 AN sequence net: sfp: Fix typo in state machine debug string net/sched: sch_taprio: properly cancel timer from taprio_destroy() net: bridge: fix under estimation in br_get_linkxstats_size() ...
2021-10-02ptp_pch: Load module automatically if ID matchesAndy Shevchenko1-0/+1
The driver can't be loaded automatically because it misses module alias to be provided. Add corresponding MODULE_DEVICE_TABLE() call to the driver. Fixes: 863d08ece9bf ("supports eg20t ptp clock") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-01Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-7/+2
Pull more kvm fixes from Paolo Bonzini: "Small x86 fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: selftests: Ensure all migrations are performed when test is affined KVM: x86: Swap order of CPUID entry "index" vs. "significant flag" checks ptp: Fix ptp_kvm_getcrosststamp issue for x86 ptp_kvm x86/kvmclock: Move this_cpu_pvti into kvmclock.h selftests: KVM: Don't clobber XMM register when read KVM: VMX: Fix a TSX_CTRL_CPUID_CLEAR field mask issue
2021-09-30ptp: Fix ptp_kvm_getcrosststamp issue for x86 ptp_kvmZelin Deng1-7/+2
hv_clock is preallocated to have only HVC_BOOT_ARRAY_SIZE (64) elements; if the PTP_SYS_OFFSET_PRECISE ioctl is executed on vCPUs whose index is 64 of higher, retrieving the struct pvclock_vcpu_time_info pointer with "src = &hv_clock[cpu].pvti" will result in an out-of-bounds access and a wild pointer. Change it to "this_cpu_pvti()" which is guaranteed to be valid. Fixes: 95a3d4454bb1 ("Switch kvmclock data to a PER_CPU variable") Signed-off-by: Zelin Deng <zelin.deng@linux.alibaba.com> Cc: <stable@vger.kernel.org> Message-Id: <1632892429-101194-3-git-send-email-zelin.deng@linux.alibaba.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-27ptp: ocp: Move devlink registration to be last devlink commandLeon Romanovsky1-4/+2
This change prevents from users to access device before devlink is fully configured. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27ptp: clockmatrix: use rsmu driver to access i2c/spi busMin Li3-1241/+431
rsmu (Renesas Synchronization Management Unit ) driver is located in drivers/mfd and responsible for creating multiple devices including clockmatrix phc, which will then use the exposed regmap and mutex handle to access i2c/spi bus. Signed-off-by: Min Li <min.li.xe@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+1
net/mptcp/protocol.c 977d293e23b4 ("mptcp: ensure tx skbs always have the MPTCP ext") efe686ffce01 ("mptcp: ensure tx skbs always have the MPTCP ext") same patch merged in both trees, keep net-next. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-22devlink: Make devlink_register to be voidLeon Romanovsky1-6/+1
devlink_register() can't fail and always returns success, but all drivers are obligated to check returned status anyway. This adds a lot of boilerplate code to handle impossible flow. Make devlink_register() void and simplify the drivers that use that API call. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Simon Horman <simon.horman@corigine.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> # dsa Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20ptp: ocp: add COMMON_CLK dependencyArnd Bergmann1-0/+1
Without CONFIG_COMMON_CLK, this fails to link: arm-linux-gnueabi-ld: drivers/ptp/ptp_ocp.o: in function `ptp_ocp_register_i2c': ptp_ocp.c:(.text+0xcc0): undefined reference to `__clk_hw_register_fixed_rate' arm-linux-gnueabi-ld: ptp_ocp.c:(.text+0xcf4): undefined reference to `devm_clk_hw_register_clkdev' arm-linux-gnueabi-ld: drivers/ptp/ptp_ocp.o: in function `ptp_ocp_detach': ptp_ocp.c:(.text+0x1c24): undefined reference to `clk_hw_unregister_fixed_rate' Fixes: a7e1abad13f3 ("ptp: Add clock driver for the OpenCompute TimeCard.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-17ptp: ocp: Avoid operator precedence warning in ptp_ocp_summary_show()Nathan Chancellor1-2/+2
Clang warns twice: drivers/ptp/ptp_ocp.c:2065:16: error: operator '?:' has lower precedence than '&'; '&' will be evaluated first [-Werror,-Wbitwise-conditional-parentheses] on & map ? " ON" : "OFF", src); ~~~~~~~~ ^ drivers/ptp/ptp_ocp.c:2065:16: note: place parentheses around the '&' expression to silence this warning on & map ? " ON" : "OFF", src); ^ ( ) drivers/ptp/ptp_ocp.c:2065:16: note: place parentheses around the '?:' expression to evaluate it first on & map ? " ON" : "OFF", src); ^ on and map are both booleans so this should be a logical AND, which clears up the operator precedence issue. Fixes: a62a56d04e63 ("ptp: ocp: Enable 4th timestamper / PPS generator") Link: https://github.com/ClangBuiltLinux/linux/issues/1457 Suggested-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Link: https://lore.kernel.org/r/20210917045204.1385801-1-nathan@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-15ptp: ocp: Add timestamp window adjustmentJonathan Lemon1-11/+66
The following process is used to read the PHC clock and correlate the reading with the "correct" system time. - get starting timestamp - issue PCI write command - issue PCI read command - get ending timestamp - read latched sec/nsec registers The write command is posted to PCI bus and returns. When the write arrives at the FPGA, the PHC time is latched into the sec/nsec registers, and a flag is set indicating the registers are valid. The read command returns this flag, and the time retrieval proceeds. Below is a non-scaled picture of the timing diagram involved. The PHC time corresponds to some SYS time between [start, end]. Userspace usually uses the midpoint between [start, end] to estimate the PCI delay and match this with the PHC time. [start] | | write |-------+ | | \ | read |----+ +----->| | \ * PHC time latched into register | \ | midpoint | +------->| | | | | | +----| | / | |<--------+ | [end] | | As the diagram indicates, the PHC time is latched before the midpoint, so the system clock time is slightly off the real PHC time. This shows up as a phase error with an oscilliscope. The workaround here is to provide a tunable which reduces (shrinks) the end time in the above diagram. This in turn moves the calculated midpoint so the system time and PHC time are in agreemment. Currently, the adjustment reduces the end time by 3/16th of the entire window. E.g.: [start, end] ==> [start, (end - (3/16 * end)], which produces reasonably good results. Also reduce delays by just writing to the clock control register instead of performing a read/modify/write sequence, as the contents of the control register are known. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Have FPGA fold in ns adjustment for adjtime.Jonathan Lemon1-15/+25
The current implementation of adjtime uses gettime/settime to perform nanosecond adjustments. This introduces addtional phase errors due to delays. Instead, use the FPGA's ability to just apply the nanosecond adjustment to the clock directly. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Enable 4th timestamper / PPS generatorJonathan Lemon1-8/+74
A 4th timestamper is added which timestamps the output of the PHC. The clock nanosecond offset is not always zero, so when compared to other timestampers, this provides precise measurements. Also, the timestamper interrupt from the PHC can be used to generate a PPS signal for /dev/pps. Also allow PTP_CLK_REQ_PEROUT requests for a 1PPS output, but do not actually configure any output pins, this is done via sysfs. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Add second GNSS deviceJonathan Lemon1-2/+15
Upcoming boards may have a second GNSS receiver, getting information from a different constellation than the first receiver, which provides some measure of anti-spoofing. Expose the sysfs attribute for this device, if detected. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Add NMEA outputJonathan Lemon1-2/+55
The timecard can provide a NMEA-1083 ZDA (time and date) output string on a serial port, which can be used to drive other devices. Add the NMEA resources, and the serial port as a sysfs attribute. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Add debugfs entry for timecardJonathan Lemon1-0/+233
Provide a view into the timecard internals for debugging. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Separate the init and info logicJonathan Lemon1-36/+60
On startup, parts of the FPGA need to be initialized - break these out into their own functions, separate from the purely informational blocks. On startup, distrbute the UTC:TAI offset from the NMEA GNSS parser, if it is available. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Add sysfs attribute utc_tai_offsetJonathan Lemon1-1/+48
IRIG and DCF output time in UTC, but the timecard operates on TAI internally. Add an attribute node which allows adding an offset to these modes before output. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Add IRIG-B output mode controlJonathan Lemon1-0/+41
IRIG-B has several different output formats, the timecard defaults to using B007. Add a control which selects different output modes. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Add IRIG-B and DCF blocksJonathan Lemon1-0/+129
IRIG (Inter-range Instrumentation Group) timecode format on one of the SMA output channels is provided by the IRIG master FPGA block. Enable the master when the IRIG output format is selected on either one of the output channels. By default, the output is in B007 format. DCF output format is provided by the DCF master block. Also enable the IRIG and DCF slaves, which parse an incoming signal from the external SMA connectors, and may be used to adjust the PHC. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Add SMA selector and controlsJonathan Lemon1-28/+361
The latest firmware for the TimeCard adds selectable signals for the SMA input/outputs. Add support for SMA selectors, and the GPIO controls needed for steering signals. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Add third timestamperJonathan Lemon1-2/+17
The firmware may provide a third signal timestamper, so make it available for use. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Report error if resource registration fails.Jonathan Lemon1-1/+5
If a resource could not be registered, report the name of the resource and the error code. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Skip resources with out of range irqsJonathan Lemon1-29/+18
The TimeCard exposes different resources, which may have their own irqs. Space for the irqs is allocated through a MSI or MSI-X interrupt vector. On some platforms, the interrupt allocation fails. Rather than making this fatal, just skip exposing those resources. The main timecard functionality (that of a PTP clock) will work without the additional resources. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Skip I2C flash read when there is no controller.Jonathan Lemon1-2/+5
If an I2C controller isn't present, don't try and read the I2C flash. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Parameterize the TOD information display.Jonathan Lemon1-1/+2
Only display the TOD information if there is a corresponding TOD resource. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: parameterize the i2c driver usedJonathan Lemon1-4/+21
Move the xilinx i2c driver parameters to the resource block instead of hardcoding things in the registration functions. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14ptp: ptp_clockmatrix: Add support for pll_mode=0 and manual ref switch of WF ↵Min Li3-47/+376
and WP Also correct how initialize_dco_operating_mode is called Signed-off-by: Min Li <min.li.xe@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14ptp: ptp_clockmatrix: Add support for FW 5.2 (8A34005)Min Li3-92/+165
So far we don't need to support new 5.2 functions but different register addresses Signed-off-by: Min Li <min.li.xe@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14ptp: ptp_clockmatrix: Remove idtcm_enable_tod_sync()Min Li1-227/+2
Not need since TCS firmware file will configure it properlly. Signed-off-by: Min Li <min.li.xe@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-26ptp: ocp: Simplify Kconfig.Jonathan Lemon1-8/+2
Remove the 'imply' statements, these apparently are not doing what I expected. Platform modules which are used by the driver still need to be enabled in the overall config for them to be used, but there isn't a hard dependency on them. Use 'depend' for selectable modules which provide functions used directly by the driver. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+2
drivers/ptp/Kconfig: 55c8fca1dae1 ("ptp_pch: Restore dependency on PCI") e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-17ptp: ocp: Have Kconfig select NET_DEVLINKJonathan Lemon1-0/+1
NET doesn't imply NET_DEVLINK. Select this separately, so that random config combinations don't complain. Reported-by: kernel test robot <lkp@intel.com> Fixes: 773bda964921 ("ptp: ocp: Expose various resources on the timecard.") Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-17ptp: ocp: Fix error path for pci_ocp_device_init()Jonathan Lemon1-3/+4
If ptp_ocp_device_init() fails, pci_disable_device() is skipped. Fix the error handling so this case is covered. Update ptp_ocp_remove() so the normal exit path is identical. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 773bda964921 ("ptp: ocp: Expose various resources on the timecard.") Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-17ptp: ocp: Fix uninitialized variable warning spotted by clang.Jonathan Lemon1-1/+1
If attempting to flash the firmware with a blob of size 0, the entire write loop is skipped and the uninitialized err is returned. Fix by setting to 0 first. Fixes: 773bda964921 ("ptp: ocp: Expose various resources on the timecard.") Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-16ptp: ocp: don't allow on S390Randy Dunlap1-0/+1
Fix kconfig warning on arch/s390/: WARNING: unmet direct dependencies detected for SERIAL_8250 Depends on [n]: TTY [=y] && HAS_IOMEM [=y] && !S390 [=y] Selected by [m]: - PTP_1588_CLOCK_OCP [=m] && PTP_1588_CLOCK [=m] && HAS_IOMEM [=y] && PCI [=y] && SPI [=y] && I2C [=m] && MTD [=m] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-16ptp_pch: Restore dependency on PCIAndy Shevchenko1-1/+2
During the swap dependency on PCH_GBE to selection PTP_1588_CLOCK_PCH incidentally dropped the implicit dependency on the PCI. Restore it. Fixes: 18d359ceb044 ("pch_gbe, ptp_pch: Fix the dependency direction between these drivers") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-14ethernet: fix PTP_1588_CLOCK dependenciesArnd Bergmann2-1/+16
The 'imply' keyword does not do what most people think it does, it only politely asks Kconfig to turn on another symbol, but does not prevent it from being disabled manually or built as a loadable module when the user is built-in. In the ICE driver, the latter now causes a link failure: aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_eth_ioctl': ice_main.c:(.text+0x13b0): undefined reference to `ice_ptp_get_ts_config' ice_main.c:(.text+0x13b0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_get_ts_config' aarch64-linux-ld: ice_main.c:(.text+0x13bc): undefined reference to `ice_ptp_set_ts_config' ice_main.c:(.text+0x13bc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_set_ts_config' aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_prepare_for_reset': ice_main.c:(.text+0x31fc): undefined reference to `ice_ptp_release' ice_main.c:(.text+0x31fc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_release' aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_rebuild': This is a recurring problem in many drivers, and we have discussed it several times befores, without reaching a consensus. I'm providing a link to the previous email thread for reference, which discusses some related problems. To solve the dependency issue better than the 'imply' keyword, introduce a separate Kconfig symbol "CONFIG_PTP_1588_CLOCK_OPTIONAL" that any driver can depend on if it is able to use PTP support when available, but works fine without it. Whenever CONFIG_PTP_1588_CLOCK=m, those drivers are then prevented from being built-in, the same way as with a 'depends on PTP_1588_CLOCK || !PTP_1588_CLOCK' dependency that does the same trick, but that can be rather confusing when you first see it. Since this should cover the dependencies correctly, the IS_REACHABLE() hack in the header is no longer needed now, and can be turned back into a normal IS_ENABLED() check. Any driver that gets the dependency wrong will now cause a link time failure rather than being unable to use PTP support when that is in a loadable module. However, the two recently added ptp_get_vclocks_index() and ptp_convert_timestamp() interfaces are only called from builtin code with ethtool and socket timestamps, so keep the current behavior by stubbing those out completely when PTP is in a loadable module. This should be addressed properly in a follow-up. As Richard suggested, we may want to actually turn PTP support into a 'bool' option later on, preventing it from being a loadable module altogether, which would be one way to solve the problem with the ethtool interface. Fixes: 06c16d89d2cb ("ice: register 1588 PTP clock device object for E810 devices") Link: https://lore.kernel.org/netdev/20210804121318.337276-1-arnd@kernel.org/ Link: https://lore.kernel.org/netdev/CAK8P3a06enZOf=XyZ+zcAwBczv41UuCTz+=0FMf2gBz1_cOnZQ@mail.gmail.com/ Link: https://lore.kernel.org/netdev/CAK8P3a3=eOxE-K25754+fB_-i_0BZzf9a9RfPTX3ppSwu9WZXw@mail.gmail.com/ Link: https://lore.kernel.org/netdev/20210726084540.3282344-1-arnd@kernel.org/ Acked-by: Shannon Nelson <snelson@pensando.io> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210812183509.1362782-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h 9e26680733d5 ("bnxt_en: Update firmware call to retrieve TX PTP timestamp") 9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins") 099fdeda659d ("bnxt_en: Event handler for PPS events") kernel/bpf/helpers.c include/linux/bpf-cgroup.h a2baf4e8bb0f ("bpf: Fix potentially incorrect results with bpf_get_local_storage()") c7603cfa04e7 ("bpf: Add ambient BPF runtime context stored in current") drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c 5957cc557dc5 ("net/mlx5: Set all field of mlx5_irq before inserting it to the xarray") 2d0b41a37679 ("net/mlx5: Refcount mlx5_irq with integer") MAINTAINERS 7b637cd52f02 ("MAINTAINERS: fix Microchip CAN BUS Analyzer Tool entry typo") 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-09devlink: Set device as early as possibleLeon Romanovsky1-22/+4
All kernel devlink implementations call to devlink_alloc() during initialization routine for specific device which is used later as a parent device for devlink_register(). Such late device assignment causes to the situation which requires us to call to device_register() before setting other parameters, but that call opens devlink to the world and makes accessible for the netlink users. Any attempt to move devlink_register() to be the last call generates the following error due to access to the devlink->dev pointer. [ 8.758862] devlink_nl_param_fill+0x2e8/0xe50 [ 8.760305] devlink_param_notify+0x6d/0x180 [ 8.760435] __devlink_params_register+0x2f1/0x670 [ 8.760558] devlink_params_register+0x1e/0x20 The simple change of API to set devlink device in the devlink_alloc() instead of devlink_register() fixes all this above and ensures that prior to call to devlink_register() everything already set. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>