summaryrefslogtreecommitdiff
path: root/drivers/rtc/rtc-s3c.c
AgeCommit message (Collapse)AuthorFilesLines
2023-07-28rtc: Explicitly include correct DT includesRob Herring1-1/+0
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230724205456.767430-1-robh@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-03-18rtc: s3c: Convert to platform remove callback returning voidUwe Kleine-König1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230304133028.2135435-30-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-11-15rtc: s3c: Switch to use dev_err_probe() helperYang Yingliang1-8/+3
In the probe path, dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER and prints the error name. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220919083812.755082-1-yangyingliang@huawei.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2021-10-24rtc: s3c: Add time rangeSam Protsenko1-5/+2
This RTC driver starts counting from 2000 to avoid Y2K problem. Also it only supports 100 years range for all RTCs. Provide that info to RTC framework. Also remove check for 100 years range in s3c_rtc_settime(), as RTC core won't pass any invalid values to the driver, now that correct range is set. Here is the rationale on 100 years range limitation. Info on different Samsung RTCs (credit goes to Krzysztof Kozlowski): - All S3C chips have only 8-bit wide year register (can store 100 years range in BCD format) - S5Pv210 and Exynos chips have 12-bit year register (can store 1000 years range in BCD format) But in reality we usually can't make use of those 12 bits either: - RTCs might think that both 2000 and 2100 years are leap years. So when the YEAR register is 0, RTC goes from 28 Feb to 29 Feb, and when the YEAR register is 100, RTC also goes from 28 Feb to 29 Feb. This is of course incorrect: RTC breaks leap year criteria, which breaks the time contiguity, which leads to inability to use the RTC after year of 2099. It was found for example on Exynos850 SoC. - Despite having 12 bits for holding the year value, RTC might overflow the year value internally much earlier. For example, on Exynos850 the RTC overflows when YEAR=159, making the next YEAR=0. This way RTC actually has range of 160 years, not 1000 as one may think. All that said, there is no sense in trying to increase the time range for more than 100 years on RTCs that seem capable of that. It also doesn't have too much practical value -- current hardware will be probably obsolete by 2100. Tested manually on Exynos850 RTC: $ date -s "1999-12-31 23:59:50" $ hwclock -w -f /dev/rtc0 $ date -s "2100-01-01 00:00:00" $ hwclock -w -f /dev/rtc0 $ date -s "2000-01-01 00:00:00" $ hwclock -w -f /dev/rtc0 $ hwclock -r -f /dev/rtc0 $ date -s "2099-12-31 23:59:50" $ hwclock -w -f /dev/rtc0 $ hwclock -r -f /dev/rtc0 Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211021202256.28517-4-semen.protsenko@linaro.org
2021-10-24rtc: s3c: Extract read/write IO into separate functionsSam Protsenko1-37/+61
Create dedicated functions for I/O operations and BCD conversion. It can be useful to separate those from representation conversion and other stuff found in RTC callbacks. This patch does not introduce any functional changes, it's merely refactoring change. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211021202256.28517-3-semen.protsenko@linaro.org
2021-10-24rtc: s3c: Remove usage of devm_rtc_device_register()Sam Protsenko1-4/+7
devm_rtc_device_register() is deprecated. Use devm_rtc_allocate_device() and devm_rtc_register_device() API instead. This change doesn't change the behavior, but allows for further improvements. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211021202256.28517-2-semen.protsenko@linaro.org
2021-02-06rtc: s3c: quiet maybe-unused variable warningAlexandre Belloni1-1/+1
When CONFIG_OF is disabled then the matching table is not referenced. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20210202112934.3612726-2-alexandre.belloni@bootlin.com
2021-02-06rtc: s3c: stop setting bogus timeAlexandre Belloni1-15/+0
It doesn't make sense to set the RTC to a default value at probe time. Let the core handle invalid date and time. Also, this is basically dead code since commit 22652ba72453 ("rtc: stop validating rtc_time in .read_time") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20210202112934.3612726-1-alexandre.belloni@bootlin.com
2020-12-04rtc: s3c: Remove dead code related to periodic tick handlingMarek Szyprowski1-224/+2
Support for periodic tick interrupts has been moved from the RTC class to the HR-timers long time ago. Then it has been removed from this driver by commits 80d4bb515b78 ("RTC: Cleanup rtc_class_ops->irq_set_state") and 696160fec162 ("RTC: Cleanup rtc_class_ops->irq_set_freq()"). They however did not remove all the code related to the tick handling. Do it now then. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201202111318.5353-2-m.szyprowski@samsung.com
2020-12-04rtc: s3c: Disable all enable (RTC, tick) bits in the probeMarek Szyprowski1-0/+4
Bootloader might use RTC hardware and leave it in the enabled state. Ensure that the potentially enabled periodic tick interrupts are disabled before enabling the driver, because they might cause lockup if tick interrupt happens after disabling RTC gate clock. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201202111318.5353-1-m.szyprowski@samsung.com
2020-09-15rtc: s3c: Simplify with dev_err_probe()Krzysztof Kozlowski1-7/+2
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200830080937.14367-1-krzk@kernel.org
2019-10-07rtc: use devm_platform_ioremap_resource() to simplify codeYueHaibing1-3/+1
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20191006102953.57536-2-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-3-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-4-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-5-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-6-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-7-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-8-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-9-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-10-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-11-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-12-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-13-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-14-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-15-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-16-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-17-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-18-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-19-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-20-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-21-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-22-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-23-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-24-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-25-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-26-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-27-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-28-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-29-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-30-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-31-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-32-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-33-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-34-yuehaibing@huawei.com Link: https://lore.kernel.org/r/20191006102953.57536-35-yuehaibing@huawei.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-13rtc: Remove dev_err() usage after platform_get_irq()Stephen Boyd1-6/+2
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: linux-rtc@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-40-swboyd@chromium.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22rtc: s3c: Use generic helper to get driver dataMarek Szyprowski1-11/+2
Replace of_match_node() with of_device_get_match_data(), which removes a few lines of code from the driver. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-22rtc: s3c: Rewrite clock handlingMarek Szyprowski1-43/+31
s3c_rtc_enable/disable_clk() functions were designed to be called multiple times without reference counting, because they were initially only used in alarm setting/clearing functions, which can be called both when alarm is already set or not. Later however, calls to those functions have been added to other places in the driver - like time and /proc reading callbacks, what results in broken alarm if any of such events happens after the alarm has been set. Fix this by simplifying s3c_rtc_enable/disable_clk() functions to rely on proper reference counting in clock core and move alarm enable counter to s3c_rtc_setaie() function. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-12-11rtc: s3c: Switch to use %ptRAndy Shevchenko1-16/+4
Use %ptR instead of open coded variant to print content of struct rtc_time in human readable format. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-11-14rtc: s3c-rtc: Avoid using broken ALMYEAR registerMarek Szyprowski1-6/+0
(RTC,ALM)YEAR registers of Exynos built-in RTC device contains 3 BCD characters. s3c-rtc driver uses only 2 lower of them and supports years from 2000..2099 range. The third BCD value is typically set to 0, but it looks that handling of it is broken in the hardware. It sometimes defaults to a random (even non-BCD) value. This is not an issue for handling RTCYEAR register, because bcd2bin() properly handles only 8bit values (2 BCD characters, the third one is skipped). The problem is however with ALMYEAR register and proper RTC alarm operation. When YEAREN bit is set for the configured alarm, RTC hardware triggers alarm only when ALMYEAR and RTCYEAR matches. This usually doesn't happen because of the random noise on the third BCD character. Fix this by simply skipping setting ALMYEAR register in alarm configuration. This workaround fixes broken alarm operation on Exynos built-in rtc device. My tests revealed that the issue happens on the following Exynos series: 3250, 4210, 4412, 5250 and 5410. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-02rtc: stop validating rtc_time in .read_timeAlexandre Belloni1-1/+1
The RTC core is always calling rtc_valid_tm after the read_time callback. It is not necessary to call it just before returning from the callback. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2017-06-24rtc: s3c: Handle clock enable failuresKrzysztof Kozlowski1-15/+57
clk_enable() can fail so handle such case. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-24rtc: s3c: Handle clock prepare failures in probeKrzysztof Kozlowski1-2/+6
clk_prepare_enable() can fail so handle such case. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-24rtc: s3c: Do not remove const from rodata memoryKrzysztof Kozlowski1-3/+3
All instances of struct s3c_rtc_data are in fact static const thus put in rodata so we should not drop the const while getting the pointer to them. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-24rtc: s3c: Drop unneeded cast to void pointerKrzysztof Kozlowski1-5/+5
There is no need for casting to void pointer for of_device_id data. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-24rtc: s3c: Minor white-space cleanupsKrzysztof Kozlowski1-24/+23
Minor cleanups to make the code easier to read. No functional changes. 1. Remove one space before labels as this is nowadays mostly preferred. 2. Fix indentation of arguments in function calls. 3. Split structure member declaration. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-24rtc: s3c: Jump to central exit point on getting src clock errorKrzysztof Kozlowski1-2/+2
In other error paths in probe, centralized exit point was used so make this consistent. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-19rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq()Alim Akhtar1-0/+2
As per code flow s3c_rtc_setfreq() will get called with rtc clock disabled and in set_freq we perform h/w registers read/write, which results in a kernel crash on exynos7 platform while probing rtc driver. Below is code flow: s3c_rtc_probe() clk_prepare_enable(info->rtc_clk) // rtc clock enabled s3c_rtc_gettime() // will enable clk if not done, and disable it upon exit s3c_rtc_setfreq() //then this will be called with clk disabled This patch take cares of such issue by adding s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq(). Fixes: 24e1455493da ("drivers/rtc/rtc-s3c.c: delete duplicate clock control") Cc: <stable@vger.kernel.org> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com> Tested-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-19rtc: s3c: Remove unnecessary call to disable already disabled clockAlim Akhtar1-2/+0
At the end of s3c_rtc_probe(), s3c_rtc_disable_clk() being called with rtc clock already disabled (by s3c_rtc_gettime()), which looks extra and unnecessary call. Lets clean it up. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com> Tested-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-09rtc: simplify implementations of read_alarmUwe Kleine-König1-12/+0
Since commit d68778b80dd7 ("rtc: initialize output parameter for read alarm to "uninitialized"") there is no need to explicitly set unsupported members to -1. So drop the respective assignments from drivers. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-19rtc: s3c: Don't print an error on probe deferralJavier Martinez Canillas1-5/+14
The clock and source clock looked up by the driver may not be available just because the clock controller driver was not probed yet so printing an error in this case is not correct and only adds confusion to users. However, knowing that a driver's probe was deferred may be useful so it can be printed as a debug information. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-11-08rtc: s3c: Set year, month, day value for setting alarmKrzysztof Kozlowski1-0/+16
This patch sets year, month, day value for set_alarm function. The current driver omits to set the values. This fixes setting wake alarm for dates different than current day. Without the patch the alarm scheduled for tomorrow would fire today on chosen time. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.kim@samsung.com> Signed-off-by: KyungMin Park <kyungmin.park@samsung.com> [k.kozlowski: Rebase and test the patch, update commit message] Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05rtc: s3c: remove unnecessary NULL assignmentJoonyoung Shim1-1/+0
It's unnecessary the code that assigns info->rtc_clk to NULL in s3c_rtc_remove. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05rtc: s3c: add missing clk controlJoonyoung Shim1-0/+3
It's missed to call clk_unprepare() about info->rtc_src_clk in s3c_rtc_remove and to call clk_disable_unprepare about info->rtc_clk in error routine of s3c_rtc_probe. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05rtc: s3c: fix disabled clocks for alarmJoonyoung Shim1-6/+18
The clock enable/disable codes for alarm have been removed from commit 24e1455493da ("drivers/rtc/rtc-s3c.c: delete duplicate clock control") and the clocks are disabled even if alarm is set, so alarm interrupt can't happen. The s3c_rtc_setaie function can be called several times with 'enabled' argument having same value, so it needs to check whether clocks are enabled or not. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Cc: <stable@vger.kernel.org> # v4.1 Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-06-19rtc: s3c: Integrate Exynos3250 into S3C6410Krzysztof Kozlowski1-13/+1
There are now no differences between RTC on Exynos3250 and S3C6410. Merge everything into one so duplicated code could be removed. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-04-17drivers/rtc/rtc-s3c.c: remove one superfluous rtc_valid_tm() checkKrzysztof Kozlowski1-3/+1
s3c_rtc_gettime() already returns the result of rtc_valid_tm() on the obtained time so get rid of another call to rtc_valid_tm(). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/rtc-s3c.c: fix failed first read of RTC timeKrzysztof Kozlowski1-16/+16
Initialize the device time (if it is wrong) before registering RTC device to fix following error message during rtc-s3c probe: [ 2.215414] rtc (null): read_time: fail to read [ 2.216322] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/rtc-s3c.c: delete duplicate clock controlChanwoo Choi1-124/+39
The current functions in s3c-rtc driver execute clk_enable/disable() to control clocks and some functions execute s3c_rtc_alarm_clk_enable() unnecessarily. So this patch deletes the duplicate clock control and spilts s3c_rtc_alarm_clk_enable() out as s3c_rtc_enable_clk()/s3c_rtc_disable_clk() to improve readability. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kukjin Kim <kgene@kernel.org> Cc: Inki Dae <inki.dae@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-13drivers/rtc/rtc-s3c.c: add .needs_src_clk to s3c6410 RTC dataJavier Martinez Canillas1-0/+1
Commit df9e26d093d3 ("rtc: s3c: add support for RTC of Exynos3250 SoC") added an "rtc_src" DT property to specify the clock used as a source to the S3C real-time clock. Not all SoCs needs this so commit eaf3a659086e ("drivers/rtc/rtc-s3c.c: fix initialization failure without rtc source clock") changed to check the struct s3c_rtc_data .needs_src_clk to conditionally grab the clock. But that commit didn't update the data for each IP version so the RTC broke on the boards that needs a source clock. This is the case of at least Exynos5250 and Exynos5440 which uses the s3c6410 RTC IP block. This commit fixes the S3C rtc on the Exynos5250 Snow and Exynos5420 Peach Pit and Pi Chromebooks. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Doug Anderson <dianders@chromium.org> Cc: Olof Johansson <olof@lixom.net> Cc: Kevin Hilman <khilman@linaro.org> Cc: Tyler Baker <tyler.baker@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-11-04Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
2014-10-30drivers/rtc/rtc-s3c.c: fix initialization failure without rtc source clockMarek Szyprowski1-6/+8
Fix unconditional initialization failure on non-exynos3250 SoCs. Commit df9e26d093d3 ("rtc: s3c: add support for RTC of Exynos3250 SoC") introduced rtc source clock support, but also added initialization failure on SoCs, which doesn't need such clock. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-20rtc: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-14rtc: s3c: add support for RTC of Exynos3250 SoCChanwoo Choi1-1/+92
Add support for RTC of Exynos3250 SoC. The Exynos3250 needs source clock(32.768KHz) for RTC block. If source clock of RTC is registerd on clock list of common clk framework, Exynos RTC drvier have to control this clock. Clock list for s3c-rtc device: - rtc : CLK_RTC of CLK_GATE_IP_PERIR is gate clock for RTC. - rtc_src : XrtcXTI is 32.768.kHz source clock for RTC. (XRTCXTI: Specifies a clock from 32.768 kHz crystal pad with XRTCXTI and XRTCXTO pins. RTC uses this clock as the source of a real-time clock.) Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14rtc: s3c: add s3c_rtc_data structure to use variant data instead of s3c_cpu_typeChanwoo Choi1-172/+289
Add s3c_rtc_data structure to variant data according to SoC type. The s3c_rtc_data structure includes some functions to control RTC operation and specific data dependent on SoC type. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14rtc: s3c: remove warning message when checking coding style with checkpatch ↵Chanwoo Choi1-12/+14
script Remove warning message when checking codeing style with checkpatch script and reduce un-necessary i2c read operation on s3c_rtc_enable. WARNING: line over 80 characters #406: FILE: drivers/rtc/rtc-s3c.c:406: + if ((readw(info->base + S3C2410_RTCCON) & S3C2410_RTCCON_RTCEN) == 0) { WARNING: line over 80 characters #414: FILE: drivers/rtc/rtc-s3c.c:414: + if ((readw(info->base + S3C2410_RTCCON) & S3C2410_RTCCON_CNTSEL)) { WARNING: line over 80 characters #422: FILE: drivers/rtc/rtc-s3c.c:422: + if ((readw(info->base + S3C2410_RTCCON) & S3C2410_RTCCON_CLKRST)) { WARNING: Missing a blank line after declarations #451: FILE: drivers/rtc/rtc-s3c.c:451: + struct s3c_rtc_drv_data *data; + if (pdev->dev.of_node) { WARNING: Missing a blank line after declarations #453: FILE: drivers/rtc/rtc-s3c.c:453: + const struct of_device_id *match; + match = of_match_node(s3c_rtc_dt_match, pdev->dev.of_node); WARNING: DT compatible string "samsung,s3c2416-rtc" appears un-documented -- check ./Documentation/devicetree/bindings/ #650: FILE: drivers/rtc/rtc-s3c.c:650: + .compatible = "samsung,s3c2416-rtc", WARNING: DT compatible string "samsung,s3c2443-rtc" appears un-documented -- check ./Documentation/devicetree/bindings/ #653: FILE: drivers/rtc/rtc-s3c.c:653: + .compatible = "samsung,s3c2443-rtc", Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14rtc: s3c: define s3c_rtc structure to remove global variables.Chanwoo Choi1-215/+216
Define s3c_rtc structure including necessary variables for S3C RTC device instead of global variables. This patch improves the readability by removing global variables. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04drivers/rtc/rtc-s3c.c: remove NO_IRQ macroPankaj Dubey1-2/+2
NO_IRQ may be defined as '(unsigned int) -1' in some architectures (arm, sh ...), and either may not be defined in some architectures (arm64) which can enable RTC_DRV_S3C. Also since platform_get_irq returns err-code in case of any error, we do not need to intialize s3c_rtc_alarmno and s3c_rtc_tickno. Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-04drivers/rtc/rtc-s3c.c: fix incorrect way of save/restore of S3C2410_TICNT ↵Vikas Sajjan1-5/+12
for TYPE_S3C64XX On exynos5250, exynos5420 and exynos5260 it was observed that, after 1 cycle of S2R, the rtc-tick occurs at a very fast rate as compared to the rtc-tick occuring before S2R. This patch fixes the above issue by correcting the wrong way of save/restore of S3C2410_TICNT for TYPE_S3C64XX. Signed-off-by: Vikas Sajjan <vikas.sajjan@samsung.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04rtc: rtc-s3c: remove unnecessary platform_set_drvdata()Jingoo Han1-7/+2
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d063100 ("device-core: Ensure drvdata = NULL when no driver is bound"). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-18drivers/rtc: don't check resource with devm_ioremap_resourceWolfram Sang1-5/+0
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Stephen Warren <swarren@nvidia.com>
2013-05-02Merge tag 'multiplatform-for-linus' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform updates from Olof Johansson: "More multiplatform enablement for ARM platforms. The ones converted in this branch are: - bcm2835 - cns3xxx - sirf - nomadik - msx - spear - tegra - ux500 We're getting close to having most of them converted! One of the larger platforms remaining is Samsung Exynos, and there are a bunch of supporting patches in this merge window for it. There was a patch in this branch to a early version of multiplatform conversion, but it ended up being reverted due to need of more bake time. The revert commit is part of the branch since it would have required rebasing multiple dependent branches and they were stable by then" * tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits) mmc: sdhci-s3c: Fix operation on non-single image Samsung platforms clocksource: nomadik-mtu: fix up clocksource/timer Revert "ARM: exynos: enable multiplatform support" ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ" ARM: exynos: enable multiplatform support rtc: s3c: make header file local mtd: onenand/samsung: make regs-onenand.h file local thermal/exynos: remove unnecessary header inclusions mmc: sdhci-s3c: remove platform dependencies ARM: samsung: move mfc device definition to s5p-dev-mfc.c ARM: exynos: move debug-macro.S to include/debug/ ARM: exynos: prepare for sparse IRQ ARM: exynos: introduce EXYNOS_ATAGS symbol ARM: tegra: build assembly files with -march=armv7-a ARM: Push selects for TWD/SCU into machine entries ARM: ux500: build hotplug.o for ARMv7-a ARM: ux500: move to multiplatform ARM: ux500: make remaining headers local ARM: ux500: make irqs.h local to platform ARM: ux500: get rid of <mach/[hardware|db8500-regs].h> ...