| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Patch series "s390: A couple of fixes for -Wmissing-prototypes".
This series resolves a couple of -Wmissing-prototypes that I see in my
builds of -next, even though the issues appear to be latent. This
addresses issues which will be exposed by the later patch
"Makefile.extrawarn: turn on missing-prototypes globally".
This patch (of 2):
With CONFIG_DASD_PROFILE=n, there is a warning that
dasd_stats_generic_show() is missing a prototype:
drivers/s390/block/dasd.c:1109:5: warning: no previous prototype for 'dasd_stats_generic_show' [-Wmissing-prototypes]
1109 | int dasd_stats_generic_show(struct seq_file *m, void *v)
| ^~~~~~~~~~~~~~~~~~~~~~~
This function has been unused since its introduction in commit
4fa52aa7a82f ("[S390] dasd: add enhanced DASD statistics interface"),
remove it to clear up the warning.
Link: https://lkml.kernel.org/r/20231130-s390-missing-prototypes-v1-0-799d3cf07fb7@kernel.org
Link: https://lkml.kernel.org/r/20231130-s390-missing-prototypes-v1-1-799d3cf07fb7@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Jan Höppner <hoeppner@linux.ibm.com>
Cc: Stefan Haberland <sth@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In dasd_profile_start() the amount of requests on the device queue are
counted. The access to the device queue is unprotected against
concurrent access. With a lot of parallel I/O, especially with alias
devices enabled, the device queue can change while dasd_profile_start()
is accessing the queue. In the worst case this leads to a kernel panic
due to incorrect pointer accesses.
Fix this by taking the device lock before accessing the queue and
counting the requests. Additionally the check for a valid profile data
pointer can be done earlier to avoid unnecessary locking in a hot path.
Cc: <stable@vger.kernel.org>
Fixes: 4fa52aa7a82f ("[S390] dasd: add enhanced DASD statistics interface")
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20231025132437.1223363-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Convert dasd to use bdev_open_by_path() and pass the handle around.
CC: linux-s390@vger.kernel.org
CC: Christian Borntraeger <borntraeger@linux.ibm.com>
CC: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-14-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull superblock updates from Christian Brauner:
"This contains the super rework that was ready for this cycle. The
first part changes the order of how we open block devices and allocate
superblocks, contains various cleanups, simplifications, and a new
mechanism to wait on superblock state changes.
This unblocks work to ultimately limit the number of writers to a
block device. Jan has already scheduled follow-up work that will be
ready for v6.7 and allows us to restrict the number of writers to a
given block device. That series builds on this work right here.
The second part contains filesystem freezing updates.
Overview:
The generic superblock changes are rougly organized as follows
(ignoring additional minor cleanups):
(1) Removal of the bd_super member from struct block_device.
This was a very odd back pointer to struct super_block with
unclear rules. For all relevant places we have other means to get
the same information so just get rid of this.
(2) Simplify rules for superblock cleanup.
Roughly, everything that is allocated during fs_context
initialization and that's stored in fs_context->s_fs_info needs
to be cleaned up by the fs_context->free() implementation before
the superblock allocation function has been called successfully.
After sget_fc() returned fs_context->s_fs_info has been
transferred to sb->s_fs_info at which point sb->kill_sb() if
fully responsible for cleanup. Adhering to these rules means that
cleanup of sb->s_fs_info in fill_super() is to be avoided as it's
brittle and inconsistent.
Cleanup shouldn't be duplicated between sb->put_super() as
sb->put_super() is only called if sb->s_root has been set aka
when the filesystem has been successfully born (SB_BORN). That
complexity should be avoided.
This also means that block devices are to be closed in
sb->kill_sb() instead of sb->put_super(). More details in the
lower section.
(3) Make it possible to lookup or create a superblock before opening
block devices
There's a subtle dependency on (2) as some filesystems did rely
on fill_super() to be called in order to correctly clean up
sb->s_fs_info. All these filesystems have been fixed.
(4) Switch most filesystem to follow the same logic as the generic
mount code now does as outlined in (3).
(5) Use the superblock as the holder of the block device. We can now
easily go back from block device to owning superblock.
(6) Export and extend the generic fs_holder_ops and use them as
holder ops everywhere and remove the filesystem specific holder
ops.
(7) Call from the block layer up into the filesystem layer when the
block device is removed, allowing to shut down the filesystem
without risk of deadlocks.
(8) Get rid of get_super().
We can now easily go back from the block device to owning
superblock and can call up from the block layer into the
filesystem layer when the device is removed. So no need to wade
through all registered superblock to find the owning superblock
anymore"
Link: https://lore.kernel.org/lkml/20230824-prall-intakt-95dbffdee4a0@brauner/
* tag 'v6.6-vfs.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (47 commits)
super: use higher-level helper for {freeze,thaw}
super: wait until we passed kill super
super: wait for nascent superblocks
super: make locking naming consistent
super: use locking helpers
fs: simplify invalidate_inodes
fs: remove get_super
block: call into the file system for ioctl BLKFLSBUF
block: call into the file system for bdev_mark_dead
block: consolidate __invalidate_device and fsync_bdev
block: drop the "busy inodes on changed media" log message
dasd: also call __invalidate_device when setting the device offline
amiflop: don't call fsync_bdev in FDFMTBEG
floppy: call disk_force_media_change when changing the format
block: simplify the disk_force_media_change interface
nbd: call blk_mark_disk_dead in nbd_clear_sock_ioctl
xfs use fs_holder_ops for the log and RT devices
xfs: drop s_umount over opening the log and RT devices
ext4: use fs_holder_ops for the log device
ext4: drop s_umount over opening the log device
...
|
|
We currently have two interfaces that take a block_devices and the find
a mounted file systems to flush or invaldidate data on it. Both are a
bit problematic because they only work for the "main" block devices
that is used as s_dev for the super_block, and because they don't call
into the file system at all.
Merge the two into a new bdev_mark_dead helper that does both the
syncing and invalidation and which is properly documented. This is
in preparation of merging the functionality into the ->mark_dead
holder operation so that it will work on additional block devices
used by a file systems and give us a single entry point for invalidation
of dead devices or media.
Note that a single standalone fsync_bdev call for an obscure ioctl
remains for now, but that one will also be deal with in a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-14-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Don't just write out the data, but also invalidate all caches when setting
the device offline. Stop canceling the offlining when writeback fails
as there is no way to recover from that anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-12-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The DASD device driver has a function to requeue requests to the
blocklayer.
This function is used in various cases when basic settings for the device
have to be changed like High Performance Ficon related parameters or copy
pair settings.
The functions iterates over the device->ccw_queue and also removes the
requests from the block->ccw_queue.
In case the device is started on an alias device instead of the base
device it might be removed from the block->ccw_queue without having it
canceled properly before. This might lead to a hanging device since the
request is no longer on a queue and can not be handled properly.
Fix by iterating over the block->ccw_queue instead of the
device->ccw_queue. This will take care of all blocklayer related requests
and handle them on all associated DASD devices.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230721193647.3889634-4-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi,
lpfc, qla2xxx).
We have a couple of major core changes impacting other systems:
- Command Duration Limits, which spills into block and ATA
- block level Persistent Reservation Operations, which touches block,
nvme, target and dm
Both of these are added with merge commits containing a cover letter
explaining what's going on"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (187 commits)
scsi: core: Improve warning message in scsi_device_block()
scsi: core: Replace scsi_target_block() with scsi_block_targets()
scsi: core: Don't wait for quiesce in scsi_device_block()
scsi: core: Don't wait for quiesce in scsi_stop_queue()
scsi: core: Merge scsi_internal_device_block() and device_block()
scsi: sg: Increase number of devices
scsi: bsg: Increase number of devices
scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue
scsi: ufs: ufs-pci: Add support for Intel Arrow Lake
scsi: sd: sd_zbc: Use PAGE_SECTORS_SHIFT
scsi: ufs: wb: Add explicit flush_threshold sysfs attribute
scsi: ufs: ufs-qcom: Switch to the new ICE API
scsi: ufs: dt-bindings: qcom: Add ICE phandle
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_RTC quirk
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_INTR quirk
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_RTC
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR
scsi: ufs: core: Remove dedicated hwq for dev command
scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command
scsi: ufs: dt-bindings: samsung,exynos: Drop unneeded quotes
...
|
|
The only overlap between the block open flags mapped into the fmode_t and
other uses of fmode_t are FMODE_READ and FMODE_WRITE. Define a new
blk_mode_t instead for use in blkdev_get_by_{dev,path}, ->open and
->ioctl and stop abusing fmode_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230608110258.189493-28-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The mode argument to the ->release block_device_operation is never used,
so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Link: https://lore.kernel.org/r/20230608110258.189493-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
->open is only called on the whole device. Make that explicit by
passing a gendisk instead of the block_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Link: https://lore.kernel.org/r/20230608110258.189493-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Mike Christie <michael.christie@oracle.com> says:
The patches in this thread allow us to use the block pr_ops with LIO's
target_core_iblock module to support cluster applications in VMs. They
were built over Linus's tree. They also apply over linux-next and
Martin's tree and Jens's trees.
Currently, to use windows clustering or linux clustering (pacemaker +
cluster labs scsi fence agents) in VMs with LIO and vhost-scsi, you
have to use tcmu or pscsi or use a cluster aware FS/framework for the
LIO pr file. Setting up a cluster FS/framework is pain and waste when
your real backend device is already a distributed device, and pscsi
and tcmu are nice for specific use cases, but iblock gives you the
best performance and allows you to use stacked devices like
dm-multipath. So these patches allow iblock to work like pscsi/tcmu
where they can pass a PR command to the backend module. And then
iblock will use the pr_ops to pass the PR command to the real devices
similar to what we do for unmap today.
The patches are separated in the following groups:
Patch 1 - 2:
- Add block layer callouts for reading reservations and rename reservation
error code.
Patch 3 - 5:
- SCSI support for new callouts.
Patch 6:
- DM support for new callouts.
Patch 7 - 13:
- NVMe support for new callouts.
Patch 14 - 18:
- LIO support for new callouts.
This patchset has been tested with the libiscsi PGR ops and with
window's failover cluster verification test. Note that for scsi
backend devices we need this patchset:
https://lore.kernel.org/linux-scsi/20230123221046.125483-1-michael.christie@oracle.com/T/#m4834a643ffb5bac2529d65d40906d3cfbdd9b1b7
to handle UAs. To reduce the size of this patchset that's being done
separately to make reviewing easier. And to make merging easier this
patchset and the one above do not have any conflicts so can be merged
in different trees.
Link: https://lore.kernel.org/r/20230407200551.12660-1-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
BLK_STS_NEXUS is used for NVMe/SCSI reservation conflicts and DASD's
locking feature which works similar to NVMe/SCSI reservations where a
host can get a lock on a device and when the lock is taken it will get
failures.
This patch renames BLK_STS_NEXUS so it better reflects this type of
use.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230407200551.12660-3-michael.christie@oracle.com
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The DASD driver does not kick the requeue list when requeuing IO requests
to the blocklayer. This might lead to hanging blockdevice when there is
no other trigger for this.
Fix by automatically kick the requeue list when requeuing DASD requests
to the blocklayer.
Fixes: e443343e509a ("s390/dasd: blk-mq conversion")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-8-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a check for errors in the start_io function that signal a not
working device. Trigger an autoquiesce event in that case.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-7-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a sysfs attribute aq_timeouts that controls after how many
timeouts a autoquiesce event might be triggered.
The default value is 32768 which is the maximum number of retries
for the DASD device driver DASD_RETRIES_MAX. This means that the
timeout trigger will never happen.
The default value for DASD retries is 255.
Setting the value to below 255 will trigger the timeout autoquiesce
event before an IO error is generated.
Also add the check for the configured amount of timeouts and trigger
an autoquiesce event if exceeded.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-6-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add the internal logic to check for autoquiesce triggers and handle
them.
Quiesce and resume are functions that tell Linux to stop/resume
issuing I/Os to a specific DASD.
The DASD driver allows a manual quiesce/resume via ioctl.
Autoquiesce will define an amount of triggers that will lead to
an automatic quiesce if a certain event occurs.
There is no automatic resume.
All events will be reported via DASD Extended Error Reporting (EER)
if configured.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This does not fix a real bug, since virtual addresses
are currently indentical to physical ones.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20230210000253.1644903-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
As far as I can tell there is no need for the staged setup in
dasd, so allocate the tagset and the disk with the queue in
dasd_gendisk_alloc.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20220928143945.1687114-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In case of errors or misbehaviour of the primary device a controlled
failover to one of the configured secondary devices needs to be
performed.
The swap processing stops I/O on the primary device, all requests are
re-queued to the blocklayer queue, the entries in the copy relation are
swapped and finally the link to the blockdevice is moved from primary to
secondary dasd device.
After this, the secondary becomes the new primary device and I/O is
restarted on that device.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20220920192616.808070-5-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
there is an unexpected word 'for' in the comments that need to be dropped
file - drivers/s390/block/dasd.c
line - 1728
/* check for for attention message */
changed to:
/* check for attention message */
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Link: https://lore.kernel.org/r/20220623102114.33249-1-jiangjian@cdjrlc.com
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20220804213926.3361574-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With new API blk_mq_is_reserved_rq() we can tell if a request is from
the reserved pool, so stop passing 'reserved' arg. There is actually
only a single user of that arg for all the callback implementations, which
can use blk_mq_is_reserved_rq() instead.
This will also allow us to stop passing the same 'reserved' around the
blk-mq iter functions next.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/1657109034-206040-4-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Set the queue dying flag and call blk_mq_exit_queue from del_gendisk for
all disks that do not have separately allocated queues, and thus remove
the need to call blk_cleanup_queue for them.
Rename blk_cleanup_disk to blk_mq_destroy_queue to make it clear that
this function is intended only for separately allocated blk-mq queues.
This saves an extra queue freeze for devices without a separately
allocated queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Read requests that return with NRF error are partially completed in
dasd_eckd_ese_read(). The function keeps track of the amount of
processed bytes and the driver will eventually return this information
back to the block layer for further processing via __dasd_cleanup_cqr()
when the request is in the final stage of processing (from the driver's
perspective).
For this, blk_update_request() is used which requires the number of
bytes to complete the request. As per documentation the nr_bytes
parameter is described as follows:
"number of bytes to complete for @req".
This was mistakenly interpreted as "number of bytes _left_ for @req"
leading to new requests with incorrect data length. The consequence are
inconsistent and completely wrong read requests as data from random
memory areas are read back.
Fix this by correctly specifying the amount of bytes that should be used
to complete the request.
Fixes: 5e6bdd37c552 ("s390/dasd: fix data corruption for thin provisioned devices")
Cc: stable@vger.kernel.org # 5.3+
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20220505141733.1989450-5-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For ESE devices we get an error for write operations on an unformatted
track. Afterwards the track will be formatted and the IO operation
restarted.
When using alias devices a track might be accessed by multiple requests
simultaneously and there is a race window that a track gets formatted
twice resulting in data loss.
Prevent this by remembering the amount of formatted tracks when starting
a request and comparing this number before actually formatting a track
on the fly. If the number has changed there is a chance that the current
track was finally formatted in between. As a result do not format the
track and restart the current IO to check.
The number of formatted tracks does not match the overall number of
formatted tracks on the device and it might wrap around but this is no
problem. It is only needed to recognize that a track has been formatted at
all in between.
Fixes: 5e2b17e712cf ("s390/dasd: Add dynamic formatting support for ESE volumes")
Cc: stable@vger.kernel.org # 5.3+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20220505141733.1989450-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For ESE devices we get an error when accessing an unformatted track.
The handling of this error will return zero data for read requests and
format the track on demand before writing to it. To do this the code needs
to distinguish between read and write requests. This is done with data from
the blocklayer request. A pointer to the blocklayer request is stored in
the CQR.
If there is an error on the device an ERP request is built to do error
recovery. While the ERP request is mostly a copy of the original CQR the
pointer to the blocklayer request is not copied to not accidentally pass
it back to the blocklayer without cleanup.
This leads to the error that during ESE handling after an ERP request was
built it is not possible to determine the IO direction. This leads to the
formatting of a track for read requests which might in turn lead to data
corruption.
Fixes: 5e2b17e712cf ("s390/dasd: Add dynamic formatting support for ESE volumes")
Cc: stable@vger.kernel.org # 5.3+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20220505141733.1989450-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
__dasd_device_check_path_events() calls the discipline path event handler.
This handler can leave the 'to be verified pathmask' populated for an
additional verification.
There is a race window where the worker has finished before
dasd_path_clear_all_verify() is called which resets the tbvpm.
Due to this there could be outstanding path verifications missed.
Fix by clearing the pathmasks before calling the handler and add them
again in case of an error.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20211020115124.1735254-8-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
dasd_set_target_state is only used inside of dasd_mod.ko, so don't
export it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20210701142221.3408680-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block driver updates from Jens Axboe:
- MD changes via Song:
- raid5 POWER fix
- raid1 failure fix
- UAF fix for md cluster
- mddev_find_or_alloc() clean up
- Fix NULL pointer deref with external bitmap
- Performance improvement for raid10 discard requests
- Fix missing information of /proc/mdstat
- rsxx const qualifier removal (Arnd)
- Expose allocated brd pages (Calvin)
- rnbd via Gioh Kim:
- Change maintainer
- Change domain address of maintainers' email
- Add polling IO mode and document update
- Fix memory leak and some bug detected by static code analysis
tools
- Code refactoring
- Series of floppy cleanups/fixes (Denis)
- s390 dasd fixes (Julian)
- kerneldoc fixes (Lee)
- null_blk double free (Lv)
- null_blk virtual boundary addition (Max)
- Remove xsysace driver (Michal)
- umem driver removal (Davidlohr)
- ataflop fixes (Dan)
- Revalidate disk removal (Christoph)
- Bounce buffer cleanups (Christoph)
- Mark lightnvm as deprecated (Christoph)
- mtip32xx init cleanups (Shixin)
- Various fixes (Tian, Gustavo, Coly, Yang, Zhang, Zhiqiang)
* tag 'for-5.13/drivers-2021-04-27' of git://git.kernel.dk/linux-block: (143 commits)
async_xor: increase src_offs when dropping destination page
drivers/block/null_blk/main: Fix a double free in null_init.
md/raid1: properly indicate failure when ending a failed write request
md-cluster: fix use-after-free issue when removing rdev
nvme: introduce generic per-namespace chardev
nvme: cleanup nvme_configure_apst
nvme: do not try to reconfigure APST when the controller is not live
nvme: add 'kato' sysfs attribute
nvme: sanitize KATO setting
nvmet: avoid queuing keep-alive timer if it is disabled
brd: expose number of allocated pages in debugfs
ataflop: fix off by one in ataflop_probe()
ataflop: potential out of bounds in do_format()
drbd: Fix fall-through warnings for Clang
block/rnbd: Use strscpy instead of strlcpy
block/rnbd-clt-sysfs: Remove copy buffer overlap in rnbd_clt_get_path_name
block/rnbd-clt: Remove max_segment_size
block/rnbd-clt: Generate kobject_uevent when the rnbd device state changes
block/rnbd-srv: Remove unused arguments of rnbd_srv_rdma_ev
Documentation/ABI/rnbd-clt: Add description for nr_poll_queues
...
|
|
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was
implemented. We can safely remove it, because the kernel has grown
to have many more reliable mechanisms to determine if device is
supported or not.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Wire up device_driver->dev_groups, so that really_probe() creates the
sysfs attributes for us automatically.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20210316094513.2601218-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Prevent that an IO request is build during device shutdown initiated by
a driver unbind. This request will never be able to be processed or
canceled and will hang forever. This will lead also to a hanging unbind.
Fix by checking not only if the device is in READY state but also check
that there is no device offline initiated before building a new IO request.
Fixes: e443343e509a ("s390/dasd: blk-mq conversion")
Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Tested-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In case of an unbind of the DASD device driver the function
dasd_generic_remove() is called which shuts down the device.
Among others this functions removes the int_handler from the cdev.
During shutdown the device cancels all outstanding IO requests and waits
for completion of the clear request.
Unfortunately the clear interrupt will never be received when there is no
interrupt handler connected.
Fix by moving the int_handler removal after the call to the state machine
where no request or interrupt is outstanding.
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Tested-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper to call kobject_uevent for the disk and all partitions, and
unexport the disk_part_iter_* helpers that are now only used in the core
block code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block driver updates from Jens Axboe:
"Nothing major in here:
- NVMe pull request from Christoph:
- nvmet passthrough improvements (Chaitanya Kulkarni)
- fcloop error injection support (James Smart)
- read-only support for zoned namespaces without Zone Append
(Javier González)
- improve some error message (Minwoo Im)
- reject I/O to offline fabrics namespaces (Victor Gladkov)
- PCI queue allocation cleanups (Niklas Schnelle)
- remove an unused allocation in nvmet (Amit Engel)
- a Kconfig spelling fix (Colin Ian King)
- nvme_req_qid simplication (Baolin Wang)
- MD pull request from Song:
- Fix race condition in md_ioctl() (Dae R. Jeong)
- Initialize read_slot properly for raid10 (Kevin Vigor)
- Code cleanup (Pankaj Gupta)
- md-cluster resync/reshape fix (Zhao Heming)
- Move null_blk into its own directory (Damien Le Moal)
- null_blk zone and discard improvements (Damien Le Moal)
- bcache race fix (Dongsheng Yang)
- Set of rnbd fixes/improvements (Gioh Kim, Guoqing Jiang, Jack Wang,
Lutz Pogrell, Md Haris Iqbal)
- lightnvm NULL pointer deref fix (tangzhenhao)
- sr in_interrupt() removal (Sebastian Andrzej Siewior)
- FC endpoint security support for s390/dasd (Jan Höppner, Sebastian
Ott, Vineeth Vijayan). From the s390 arch guys, arch bits included
as it made it easier for them to funnel the feature through the
block driver tree.
- Follow up fixes (Colin Ian King)"
* tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block: (64 commits)
block: drop dead assignments in loop_init()
sr: Remove in_interrupt() usage in sr_init_command().
sr: Switch the sector size back to 2048 if sr_read_sector() changed it.
cdrom: Reset sector_size back it is not 2048.
drivers/lightnvm: fix a null-ptr-deref bug in pblk-core.c
null_blk: Move driver into its own directory
null_blk: Allow controlling max_hw_sectors limit
null_blk: discard zones on reset
null_blk: cleanup discard handling
null_blk: Improve implicit zone close
null_blk: improve zone locking
block: Align max_hw_sectors to logical blocksize
null_blk: Fail zone append to conventional zones
null_blk: Fix zone size initialization
bcache: fix race between setting bdev state to none and new write request direct to backing
block/rnbd: fix a null pointer dereference on dev->blk_symlink_name
block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name
block/rnbd: call kobject_put in the failure path
Documentation/ABI/rnbd-srv: add document for force_close
block/rnbd-srv: close a mapped device from server side.
...
|
|
Pull block updates from Jens Axboe:
"Another series of killing more code than what is being added, again
thanks to Christoph's relentless cleanups and tech debt tackling.
This contains:
- blk-iocost improvements (Baolin Wang)
- part0 iostat fix (Jeffle Xu)
- Disable iopoll for split bios (Jeffle Xu)
- block tracepoint cleanups (Christoph Hellwig)
- Merging of struct block_device and hd_struct (Christoph Hellwig)
- Rework/cleanup of how block device sizes are updated (Christoph
Hellwig)
- Simplification of gendisk lookup and removal of block device
aliasing (Christoph Hellwig)
- Block device ioctl cleanups (Christoph Hellwig)
- Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig)
- Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig)
- sbitmap improvements (Pavel Begunkov)
- Hybrid polling fix (Pavel Begunkov)
- bvec iteration improvements (Pavel Begunkov)
- Zone revalidation fixes (Damien Le Moal)
- blk-throttle limit fix (Yu Kuai)
- Various little fixes"
* tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits)
blk-mq: fix msec comment from micro to milli seconds
blk-mq: update arg in comment of blk_mq_map_queue
blk-mq: add helper allocating tagset->tags
Revert "block: Fix a lockdep complaint triggered by request queue flushing"
nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class
blk-mq: add new API of blk_mq_hctx_set_fq_lock_class
block: disable iopoll for split bio
block: Improve blk_revalidate_disk_zones() checks
sbitmap: simplify wrap check
sbitmap: replace CAS with atomic and
sbitmap: remove swap_lock
sbitmap: optimise sbitmap_deferred_clear()
blk-mq: skip hybrid polling if iopoll doesn't spin
blk-iocost: Factor out the base vrate change into a separate function
blk-iocost: Factor out the active iocgs' state check into a separate function
blk-iocost: Move the usage ratio calculation to the correct place
blk-iocost: Remove unnecessary advance declaration
blk-iocost: Fix some typos in comments
blktrace: fix up a kerneldoc comment
block: remove the request_queue to argument request based tracepoints
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add support for the hugetlb_cma command line option to allocate
gigantic hugepages using CMA
- Add arch_get_random_long() support.
- Add ap bus userspace notifications.
- Increase default size of vmalloc area to 512GB and otherwise let it
increase dynamically by the size of physical memory. This should fix
all occurrences where the vmalloc area was not large enough.
- Completely get rid of set_fs() (aka select SET_FS) and rework address
space handling while doing that; making address space handling much
more simple.
- Reimplement getcpu vdso syscall in C.
- Add support for extended SCLP responses (> 4k). This allows e.g. to
handle also potential large system configurations.
- Simplify KASAN by removing 3-level page table support and only
supporting 4-levels from now on.
- Improve debug-ability of the kernel decompressor code, which now
prints also stack traces and symbols in case of problems to the
console.
- Remove more power management leftovers.
- Other various fixes and improvements all over the place.
* tag 's390-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (62 commits)
s390/mm: add support to allocate gigantic hugepages using CMA
s390/crypto: add arch_get_random_long() support
s390/smp: perform initial CPU reset also for SMT siblings
s390/mm: use invalid asce for user space when switching to init_mm
s390/idle: fix accounting with machine checks
s390/idle: add missing mt_cycles calculation
s390/boot: add build-id to decompressor
s390/kexec_file: fix diag308 subcode when loading crash kernel
s390/cio: fix use-after-free in ccw_device_destroy_console
s390/cio: remove pm support from ccw bus driver
s390/cio: remove pm support from css-bus driver
s390/cio: remove pm support from IO subchannel drivers
s390/cio: remove pm support from chsc subchannel driver
s390/vmur: remove unused pm related functions
s390/tape: remove unsupported PM functions
s390/cio: remove pm support from eadm-sch drivers
s390: remove pm support from console drivers
s390/dasd: remove unused pm related functions
s390/zfcp: remove pm support from zfcp driver
s390/ap: let bus_register() add the AP bus sysfs attributes
...
|
|
The power-management related functions are unused since the
'commit 394216275c7d ("s390: remove broken hibernate / power management
support")'. Remove them from dasd drivers.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Switch the partition iter infrastructure to iterate over block_device
references instead of hd_struct ones mostly used to get at the
block_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When requeueing all requests on the device request queue to the blocklayer
we might get to an ERP (error recovery) request that is a copy of an
original CQR.
Those requests do not have blocklayer request information or a pointer to
the dasd_queue set. When trying to access those data it will lead to a
null pointer dereference in dasd_requeue_all_requests().
Fix by checking if the request is an ERP request that can simply be
ignored. The blocklayer request will be requeued by the original CQR that
is on the device queue right behind the ERP request.
Fixes: 9487cfd3430d ("s390/dasd: fix handling of internal requests")
Cc: <stable@vger.kernel.org> #4.16
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If the Fibre Channel Endpoint-Security status of a path changes, a
corresponding path event is received from the CIO layer.
Process this event by re-reading the FCES information.
As the information is retrieved for all paths on a single CU in one
call, the internal status can also be updated for all paths and no
processing per path is necessary.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
As more path events need to be handled for ECKD the current path
verification infrastructure can be reused. Rename all path verifcation
code to fit the more broadly based task of path event handling and put
the path verification in a new separate function.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The discipline argument in dasd_generic_probe() isn't used and there is
no history how it was used in the past. Remove it.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Implement the ->set_read_only method instead of parsing the actual
ioctl command.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the call to blk_should_fake_timeout out of blk_mq_complete_request
and into the drivers, skipping call sites that are obvious error
handlers, and remove the now superflous blk_mq_force_complete_rq helper.
This ensures we don't keep injecting errors into completions that just
terminate the Linux request after the hardware has been reset or the
command has been aborted.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Devices are formatted in multiple of tracks.
For an Extent Space Efficient (ESE) volume we get errors when accessing
unformatted tracks. In this case the driver either formats the track on
the flight for write requests or returns zero data for read requests.
In case a request spans multiple tracks, the indication of an unformatted
track presented for the first track is incorrectly applied to all tracks
covered by the request. As a result, tracks containing data will be handled
as empty, resulting in zero data being returned on read, or overwriting
existing data with zero on write.
Fix by determining the track that gets the NRF error.
For write requests only format the track that is surely not formatted.
For Read requests all tracks before have returned valid data and should not
be touched.
All tracks after the unformatted track might be formatted or not. Those are
returned to the blocklayer to build a new request.
When using alias devices there is a chance that multiple write requests
trigger a format of the same track which might lead to data loss. Ensure
that a track is formatted only once by maintaining a list of currently
processed tracks.
Fixes: 5e2b17e712cf ("s390/dasd: Add dynamic formatting support for ESE volumes")
Cc: stable@vger.kernel.org # 5.3+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The storage server issues three different types of out-of-space messages
whenever the Extent Pool or Extent Repository space runs short. When a
configured warning watermark is reached, the physical space is
completeley exhausted, or the capacity constraints have been relieved, a
message is received.
A log entry for the sysadmin to react to is generated in any case. In
case the physical space is completely exhausted, sense data that reads
"no space left on device" is received. In this case, currently running
I/O will be blocked until space has either been released or added to the
extent pool, and a relieve message was received via an attention
interrupt.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
ECKD, FBA, and the DIAG discipline use slightly different block layer
settings. In preparation of even more diverse queue settings, make
dasd_setup_queue() a discipline function.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
There is dasd_sleep_on() and dasd_sleep_on_interruptible() to start CCW
requests uninterruptible and interruptible. However, there is only
dasd_sleep_on_queue() to start requests from CCW queues uninterruptible.
Add dasd_sleep_on_queue_interruptible() to provide a way to start
requests from CCW queues interruptible. _dasd_sleep_on_queue() already
provides this functionality.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
A dynamic formatting is issued whenever a write request returns with
either a No Record Found error (Command Mode), Incorrect Length error
(Transport Mode), or File Protected error (Transport Mode). All three
cases mean that the tracks in question haven't been initialized in a
desired format yet.
The part of the volume that was tried to be written on is then formatted
and the original request is re-queued.
As the formatting will happen during normal I/O operations, it is quite
likely that there won't be any memory available to build the respective
request. Another two pages of memory are allocated per volume
specifically for the dynamic formatting.
The dasd_eckd_build_format() function is extended to make sure that the
original startdev is reused. Also, all formatting and format check
functions use the new memory pool exclusively now to reduce complexity.
Read operations will always return zero data when unformatted areas are
read.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
