summaryrefslogtreecommitdiff
path: root/drivers/scsi/fcoe
AgeCommit message (Collapse)AuthorFilesLines
2013-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-1/+1
Pull networking updates from David Miller: "Highlights (1721 non-merge commits, this has to be a record of some sort): 1) Add 'random' mode to team driver, from Jiri Pirko and Eric Dumazet. 2) Make it so that any driver that supports configuration of multiple MAC addresses can provide the forwarding database add and del calls by providing a default implementation and hooking that up if the driver doesn't have an explicit set of handlers. From Vlad Yasevich. 3) Support GSO segmentation over tunnels and other encapsulating devices such as VXLAN, from Pravin B Shelar. 4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton. 5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita Dukkipati. 6) In the PHY layer, allow supporting wake-on-lan in situations where the PHY registers have to be written for it to be configured. Use it to support wake-on-lan in mv643xx_eth. From Michael Stapelberg. 7) Significantly improve firewire IPV6 support, from YOSHIFUJI Hideaki. 8) Allow multiple packets to be sent in a single transmission using network coding in batman-adv, from Martin Hundebøll. 9) Add support for T5 cxgb4 chips, from Santosh Rastapur. 10) Generalize the VXLAN forwarding tables so that there is more flexibility in configurating various aspects of the endpoints. From David Stevens. 11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver, from Dmitry Kravkov. 12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo Neira Ayuso. 13) Start adding networking selftests. 14) In situations of overload on the same AF_PACKET fanout socket, or per-cpu packet receive queue, minimize drop by distributing the load to other cpus/fanouts. From Willem de Bruijn and Eric Dumazet. 15) Add support for new payload offset BPF instruction, from Daniel Borkmann. 16) Convert several drivers over to mdoule_platform_driver(), from Sachin Kamat. 17) Provide a minimal BPF JIT image disassembler userspace tool, from Daniel Borkmann. 18) Rewrite F-RTO implementation in TCP to match the final specification of it in RFC4138 and RFC5682. From Yuchung Cheng. 19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear you like netlink, so I implemented netlink dumping of netlink sockets.") From Andrey Vagin. 20) Remove ugly passing of rtnetlink attributes into rtnl_doit functions, from Thomas Graf. 21) Allow userspace to be able to see if a configuration change occurs in the middle of an address or device list dump, from Nicolas Dichtel. 22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes Frederic Sowa. 23) Increase accuracy of packet length used by packet scheduler, from Jason Wang. 24) Beginning set of changes to make ipv4/ipv6 fragment handling more scalable and less susceptible to overload and locking contention, from Jesper Dangaard Brouer. 25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*() instead. From Hong Zhiguo. 26) Optimize route usage in IPVS by avoiding reference counting where possible, from Julian Anastasov. 27) Convert IPVS schedulers to RCU, also from Julian Anastasov. 28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger Eitzenberger. 29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG, nfnetlink_log, and nfnetlink_queue. From Gao feng. 30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa. 31) Support several new r8169 chips, from Hayes Wang. 32) Support tokenized interface identifiers in ipv6, from Daniel Borkmann. 33) Use usbnet_link_change() helper in USB net driver, from Ming Lei. 34) Add 802.1ad vlan offload support, from Patrick McHardy. 35) Support mmap() based netlink communication, also from Patrick McHardy. 36) Support HW timestamping in mlx4 driver, from Amir Vadai. 37) Rationalize AF_PACKET packet timestamping when transmitting, from Willem de Bruijn and Daniel Borkmann. 38) Bring parity to what's provided by /proc/net/packet socket dumping and the info provided by netlink socket dumping of AF_PACKET sockets. From Nicolas Dichtel. 39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin Poirier" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits) filter: fix va_list build error af_unix: fix a fatal race with bit fields bnx2x: Prevent memory leak when cnic is absent bnx2x: correct reading of speed capabilities net: sctp: attribute printl with __printf for gcc fmt checks netlink: kconfig: move mmap i/o into netlink kconfig netpoll: convert mutex into a semaphore netlink: Fix skb ref counting. net_sched: act_ipt forward compat with xtables mlx4_en: fix a build error on 32bit arches Revert "bnx2x: allow nvram test to run when device is down" bridge: avoid OOPS if root port not found drivers: net: cpsw: fix kernel warn on cpsw irq enable sh_eth: use random MAC address if no valid one supplied 3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA) tg3: fix to append hardware time stamping flags unix/stream: fix peeking with an offset larger than data in queue unix/dgram: fix peeking with an offset larger than data in queue unix/dgram: peek beyond 0-sized skbs openvswitch: Remove unneeded ovs_netdev_get_ifindex() ...
2013-04-30scsi: rename random32() to prandom_u32()Akinobu Mita1-2/+2
Use preferable function name which implies using a pseudo-random number generator. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Robert Love <robert.w.love@intel.com> Cc: James Smart <james.smart@emulex.com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-19net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*Patrick McHardy1-1/+1
Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26libfcoe: Fix fcoe_sysfs VN2VN modeRobert Love1-15/+45
The libfc discovery layer is being initialized in the 'create' paths for both legacy libfcoe module parameters and fcoe_sysfs control interfaces. The problem is that for VN2VN mode the discovery layer is initialized as if it were in 'fabric' mode and it is not re-configured when the mode is changed to 'vn2vn'. This patch splits out code that needs to be initialized once and code that can, and should be, re-configured when the mode changes. Additionally this patch makes that change so that the discovery layer can be reconfigured to the libfcoe implementation when in 'vn2vn' mode. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
2013-03-26libfc, fcoe, bnx2fc: Split fc_disc_init into fc_disc_{init, config}Robert Love1-1/+2
Split discovery initialization in code that is setup once (fcoe_disc_init) and code that can be re-configured (fcoe_disc_config). Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
2013-03-26libfc, fcoe, bnx2fc: Always use fcoe_disc_init for discovery layer ↵Robert Love1-5/+6
initialization Currently libfcoe is doing some libfc discovery layer initialization outside of libfc. This patch moves this code into libfc and sets up a split in discovery (one time) initialization code and (re-configurable) settings that will come in the next patch. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
2013-03-26fcoe: Fix deadlock between create and destroy pathsRobert Love1-4/+11
We can deadlock (s_active and fcoe_config_mutex) if a port is being destroyed at the same time one is being created. [ 4200.503113] ====================================================== [ 4200.503114] [ INFO: possible circular locking dependency detected ] [ 4200.503116] 3.8.0-rc5+ #8 Not tainted [ 4200.503117] ------------------------------------------------------- [ 4200.503118] kworker/3:2/2492 is trying to acquire lock: [ 4200.503119] (s_active#292){++++.+}, at: [<ffffffff8122d20b>] sysfs_addrm_finish+0x3b/0x70 [ 4200.503127] but task is already holding lock: [ 4200.503128] (fcoe_config_mutex){+.+.+.}, at: [<ffffffffa02f3338>] fcoe_destroy_work+0xe8/0x120 [fcoe] [ 4200.503133] which lock already depends on the new lock. [ 4200.503135] the existing dependency chain (in reverse order) is: [ 4200.503136] -> #1 (fcoe_config_mutex){+.+.+.}: [ 4200.503139] [<ffffffff810c7711>] lock_acquire+0xa1/0x140 [ 4200.503143] [<ffffffff816ca7be>] mutex_lock_nested+0x6e/0x360 [ 4200.503146] [<ffffffffa02f11bd>] fcoe_enable+0x1d/0xb0 [fcoe] [ 4200.503148] [<ffffffffa02f127d>] fcoe_ctlr_enabled+0x2d/0x50 [fcoe] [ 4200.503151] [<ffffffffa02ffbe8>] store_ctlr_enabled+0x38/0x90 [libfcoe] [ 4200.503154] [<ffffffff81424878>] dev_attr_store+0x18/0x30 [ 4200.503157] [<ffffffff8122b750>] sysfs_write_file+0xe0/0x150 [ 4200.503160] [<ffffffff811b334c>] vfs_write+0xac/0x180 [ 4200.503162] [<ffffffff811b3692>] sys_write+0x52/0xa0 [ 4200.503164] [<ffffffff816d7159>] system_call_fastpath+0x16/0x1b [ 4200.503167] -> #0 (s_active#292){++++.+}: [ 4200.503170] [<ffffffff810c680f>] __lock_acquire+0x135f/0x1c90 [ 4200.503172] [<ffffffff810c7711>] lock_acquire+0xa1/0x140 [ 4200.503174] [<ffffffff8122c626>] sysfs_deactivate+0x116/0x160 [ 4200.503176] [<ffffffff8122d20b>] sysfs_addrm_finish+0x3b/0x70 [ 4200.503178] [<ffffffff8122b2eb>] sysfs_hash_and_remove+0x5b/0xb0 [ 4200.503180] [<ffffffff8122f3d1>] sysfs_remove_group+0x61/0x100 [ 4200.503183] [<ffffffff814251eb>] device_remove_groups+0x3b/0x60 [ 4200.503185] [<ffffffff81425534>] device_remove_attrs+0x44/0x80 [ 4200.503187] [<ffffffff81425e97>] device_del+0x127/0x1c0 [ 4200.503189] [<ffffffff81425f52>] device_unregister+0x22/0x60 [ 4200.503191] [<ffffffffa0300970>] fcoe_ctlr_device_delete+0xe0/0xf0 [libfcoe] [ 4200.503194] [<ffffffffa02f1b5c>] fcoe_interface_cleanup+0x6c/0xa0 [fcoe] [ 4200.503196] [<ffffffffa02f3355>] fcoe_destroy_work+0x105/0x120 [fcoe] [ 4200.503198] [<ffffffff8107ee91>] process_one_work+0x1a1/0x580 [ 4200.503203] [<ffffffff81080c6e>] worker_thread+0x15e/0x440 [ 4200.503205] [<ffffffff8108715a>] kthread+0xea/0xf0 [ 4200.503207] [<ffffffff816d70ac>] ret_from_fork+0x7c/0xb0 [ 4200.503209] other info that might help us debug this: [ 4200.503211] Possible unsafe locking scenario: [ 4200.503212] CPU0 CPU1 [ 4200.503213] ---- ---- [ 4200.503214] lock(fcoe_config_mutex); [ 4200.503215] lock(s_active#292); [ 4200.503218] lock(fcoe_config_mutex); [ 4200.503219] lock(s_active#292); [ 4200.503221] *** DEADLOCK *** [ 4200.503223] 3 locks held by kworker/3:2/2492: [ 4200.503224] #0: (fcoe){.+.+.+}, at: [<ffffffff8107ee2b>] process_one_work+0x13b/0x580 [ 4200.503228] #1: ((&port->destroy_work)){+.+.+.}, at: [<ffffffff8107ee2b>] process_one_work+0x13b/0x580 [ 4200.503232] #2: (fcoe_config_mutex){+.+.+.}, at: [<ffffffffa02f3338>] fcoe_destroy_work+0xe8/0x120 [fcoe] [ 4200.503236] stack backtrace: [ 4200.503238] Pid: 2492, comm: kworker/3:2 Not tainted 3.8.0-rc5+ #8 [ 4200.503240] Call Trace: [ 4200.503243] [<ffffffff816c2f09>] print_circular_bug+0x1fb/0x20c [ 4200.503246] [<ffffffff810c680f>] __lock_acquire+0x135f/0x1c90 [ 4200.503248] [<ffffffff810c463a>] ? debug_check_no_locks_freed+0x9a/0x180 [ 4200.503250] [<ffffffff810c7711>] lock_acquire+0xa1/0x140 [ 4200.503253] [<ffffffff8122d20b>] ? sysfs_addrm_finish+0x3b/0x70 [ 4200.503255] [<ffffffff8122c626>] sysfs_deactivate+0x116/0x160 [ 4200.503258] [<ffffffff8122d20b>] ? sysfs_addrm_finish+0x3b/0x70 [ 4200.503260] [<ffffffff8122d20b>] sysfs_addrm_finish+0x3b/0x70 [ 4200.503262] [<ffffffff8122b2eb>] sysfs_hash_and_remove+0x5b/0xb0 [ 4200.503265] [<ffffffff8122f3d1>] sysfs_remove_group+0x61/0x100 [ 4200.503273] [<ffffffff814251eb>] device_remove_groups+0x3b/0x60 [ 4200.503275] [<ffffffff81425534>] device_remove_attrs+0x44/0x80 [ 4200.503277] [<ffffffff81425e97>] device_del+0x127/0x1c0 [ 4200.503279] [<ffffffff81425f52>] device_unregister+0x22/0x60 [ 4200.503282] [<ffffffffa0300970>] fcoe_ctlr_device_delete+0xe0/0xf0 [libfcoe] [ 4200.503285] [<ffffffffa02f1b5c>] fcoe_interface_cleanup+0x6c/0xa0 [fcoe] [ 4200.503287] [<ffffffffa02f3355>] fcoe_destroy_work+0x105/0x120 [fcoe] [ 4200.503290] [<ffffffff8107ee91>] process_one_work+0x1a1/0x580 [ 4200.503292] [<ffffffff8107ee2b>] ? process_one_work+0x13b/0x580 [ 4200.503295] [<ffffffffa02f3250>] ? fcoe_if_destroy+0x230/0x230 [fcoe] [ 4200.503297] [<ffffffff81080c6e>] worker_thread+0x15e/0x440 [ 4200.503299] [<ffffffff81080b10>] ? busy_worker_rebind_fn+0x100/0x100 [ 4200.503301] [<ffffffff8108715a>] kthread+0xea/0xf0 [ 4200.503304] [<ffffffff81087070>] ? kthread_create_on_node+0x160/0x160 [ 4200.503306] [<ffffffff816d70ac>] ret_from_fork+0x7c/0xb0 [ 4200.503308] [<ffffffff81087070>] ? kthread_create_on_node+0x160/0x160 Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com>
2013-03-01[SCSI] Merge tag 'fcoe-02-19-13' into for-linusJames Bottomley6-158/+564
FCoE Updates for 3.9 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-20libfcoe: Check for unusable FCFs before looking for conflicting FCFsBhanu Prakash Gollapudi1-9/+9
When there are multiple FCFs in the fabric, and one of them becomes unavailable, the fabric name for the unavailable FCF becomes 0 along with FIP_FL_AVAIL getting reset. In this case, FCF selection logic does not select any FCF as it first checks for conflicting FCFs (since fabric name is 0, it fails the condition), instead of first checking if it is usable or not. Fix it by first checking if FCF is usable and skip that FCF, and go to the next one in the list to check if it can be selected. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2013-02-12libfcoe: Handle CVL while waiting to select an FCFBhanu Prakash Gollapudi1-1/+9
When a CVL is received while we wait to select best FCF, we drop it without handling it. This causes initiator and the switch to go out-of-sync. Initiator proceeds selecting one of the FCFs and tries to send FIP FLOGI. However the switch may reject the FLOGI, as it has cleared its internal state, and expects the initiator to start FIP discovery protocol. Fix this condition by resetting the fcoe controller. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Reviewed-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2013-01-28fcoe: Fix deadlock while deleting FCoE interface with NPIV portsNeerav Parikh1-0/+23
This patch fixes following deadlock caused by destroying of an FCoE interface with active NPIV ports on that interface. Call Trace: [<ffffffff814b7e88>] schedule+0x64/0x66 [<ffffffff814b6b4f>] schedule_timeout+0x36/0xe3 [<ffffffff81070c55>] ? update_curr+0xd6/0x110 [<ffffffff81071f6b>] ? hrtick_update+0x1b/0x4d [<ffffffff81072405>] ? dequeue_task_fair+0x1ca/0x1d9 [<ffffffff8106a369>] ? need_resched+0x1e/0x28 [<ffffffff814b7d14>] wait_for_common+0x9b/0xf1 [<ffffffff8106e7be>] ? try_to_wake_up+0x1e0/0x1e0 [<ffffffff814b7e22>] wait_for_completion+0x1d/0x1f [<ffffffff8105ae82>] flush_workqueue+0x116/0x2a1 [<ffffffff8105b357>] drain_workqueue+0x66/0x14c [<ffffffff8105b8ef>] destroy_workqueue+0x1a/0xcf [<ffffffffa009211e>] fc_remove_host+0x154/0x17f [scsi_transport_fc] [<ffffffffa00edbb8>] fcoe_if_destroy+0x184/0x1c9 [fcoe] [<ffffffffa00edc28>] fcoe_destroy_work+0x2b/0x44 [fcoe] [<ffffffff8105a82a>] process_one_work+0x1a8/0x2a4 [<ffffffffa00edbfd>] ? fcoe_if_destroy+0x1c9/0x1c9 [fcoe] [<ffffffff8105c396>] worker_thread+0x1db/0x268 [<ffffffff810604a3>] ? wake_up_bit+0x2a/0x2a [<ffffffff8105c1bb>] ? manage_workers.clone.16+0x1f6/0x1f6 [<ffffffff8105ffd6>] kthread+0x6f/0x77 [<ffffffff814c0304>] kernel_thread_helper+0x4/0x10 [<ffffffff8105ff67>] ? kthread_freezable_should_stop+0x4b/0x4b Call Trace: [<ffffffff814b7e88>] schedule+0x64/0x66 [<ffffffff814b8041>] schedule_preempt_disabled+0xe/0x10 [<ffffffff814b70a1>] __mutex_lock_common.clone.5+0x117/0x17a [<ffffffff814b7117>] __mutex_lock_slowpath+0x13/0x15 [<ffffffff814b6f76>] mutex_lock+0x23/0x37 [<ffffffff8125b890>] ? list_del+0x11/0x30 [<ffffffffa00edc84>] fcoe_vport_destroy+0x43/0x5f [fcoe] [<ffffffffa009130a>] fc_vport_terminate+0x48/0x110 [scsi_transport_fc] [<ffffffffa00913ef>] fc_vport_sched_delete+0x1d/0x79 [scsi_transport_fc] [<ffffffff8105a82a>] process_one_work+0x1a8/0x2a4 [<ffffffffa00913d2>] ? fc_vport_terminate+0x110/0x110 [scsi_transport_fc] [<ffffffff8105c396>] worker_thread+0x1db/0x268 [<ffffffff8105c1bb>] ? manage_workers.clone.16+0x1f6/0x1f6 [<ffffffff8105ffd6>] kthread+0x6f/0x77 [<ffffffff814c0304>] kernel_thread_helper+0x4/0x10 [<ffffffff8105ff67>] ? kthread_freezable_should_stop+0x4b/0x4b [<ffffffff814c0300>] ? gs_change+0x13/0x13 A prior attempt to fix this issue is posted here: http://lists.open-fcoe.org/pipermail/devel/2012-October/012318.html or http://article.gmane.org/gmane.linux.scsi.open-fcoe.devel/11924 Based on feedback and discussion with Neil Horman it seems that the above patch may have a case where the fcoe_vport_destroy() and fcoe_destroy_work() can race; hence that patch has been withdrawn with this patch that is trying to solve the same problem in a different way. In the current approach instead of removing the fcoe_config_mutex from the vport_delete callback function; I've chosen to delete all the NPIV ports first on a given root lport before continuing with the removal of the root lport. Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2013-01-28fcoe: close race on link speed detection in fcoe codeNeil Horman1-4/+27
When creating an fcoe interfce, we call fcoe_link_speed_update before we add the lports fcoe interface to the fc_hostlist. Since network device events like NETDEV_CHANGE are only processed if an fcoe interface is found with an underlying netdev that matches the netdev of the event. Since this processing in fcoe_device_notification is how link_speed changes get communicated to the libfc code (via fcoe_link_speed_update), we have a race condition - if a NETDEV_CHANGE event is sent after the call to fcoe_link_speed_update in fcoe_netdev_config, but before we add the interface to the fc_hostlist, we will loose the event and attributes like /sys/class/fc_host/hostX/speed will not get updated properly. Fix this by moving the add to the fc_hostlist above the serialized call to fcoe_netdev_config, ensuring that we catch netdev envents before we make a direct call to fcoe_link_speed_update. Also use this opportunity to clean up access to the fc_hostlist a bit by creating a fcoe_hostlist_del accessor and replacing the cleanup in fcoe_exit to use it properly. Tested by myself successfully [ Comment over 80 chars broken into multi-line by Robert Love to satisfy checkpatch.pl ] Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reviewed-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-18random32: rename random32 to prandomAkinobu Mita1-2/+2
This renames all random32 functions to have 'prandom_' prefix as follows: void prandom_seed(u32 seed); /* rename from srandom32() */ u32 prandom_u32(void); /* rename from random32() */ void prandom_seed_state(struct rnd_state *state, u64 seed); /* rename from prandom32_seed() */ u32 prandom_u32_state(struct rnd_state *state); /* rename from prandom32() */ The purpose of this renaming is to prevent some kernel developers from assuming that prandom32() and random32() might imply that only prandom32() was the one using a pseudo-random number generator by prandom32's "p", and the result may be a very embarassing security exposure. This concern was expressed by Theodore Ts'o. And furthermore, I'm going to introduce new functions for getting the requested number of pseudo-random bytes. If I continue to use both prandom32 and random32 prefixes for these functions, the confusion is getting worse. As a result of this renaming, "prandom_" is the common prefix for pseudo-random number library. Currently, srandom32() and random32() are preserved because it is difficult to rename too many users at once. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Robert Love <robert.w.love@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Cc: David Laight <david.laight@aculab.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-14debris left by "[SCSI] libfcoe: Remove mutex_trylock/restart_syscall checks"Al Viro1-5/+1
AFAICS, the situation for fcoe_transport_disable() seems to be the same as for fcoe_transport_enable(). IOW, shouldn't it have restart_syscall() removed as well? I don't see any in-tree ->disable() instances that could return -ERESTARTSYS, anyway... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14libfcoe, fcoe: consolidate the fcoe_ctlr_get_lesb/fcoe_get_lesbYi Zou2-40/+54
Similarly they can be moved into libfcoe instead of being private to fcoe now. Also add comments particularly on the term LESB to the corresponding function. Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14libfcoe, fcoe: move fcoe_link_speed_update() to libfcoe and export itYi Zou2-35/+35
With the previous patch, fcoe_link_speed_update() can be moved into libfcoe and exported to used by fcoe, bnx2fc, and etc. Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14fcoe: add support to the get_netdev() for fcoe_interfaceYi Zou1-0/+1
Adds support to fcoe_port's newly added get_netdev fucntion pointer. Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14libfc, libfcoe, fcoe: Convert debug_logging macros to pr_infoRobert Love2-8/+7
Convert libfc, libfcoe and fcoe's debug_logging macros to use pr_info() instead of printk(KERN_INFO, ...). checkpatch.pl now complains about this, so convert libfcoe to preferred method. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com>
2012-12-14fcoe: Use the fcoe_sysfs control interfaceRobert Love2-24/+140
This patch adds support for the new fcoe_sysfs control interface to fcoe.ko. It keeps the deprecated interface in tact and therefore either the legacy or the new control interfaces can be used. A mixed mode is not supported. A user must either use the new interfaces or the old ones, but not both. The fcoe_ctlr's link state is now driven by both the netdev link state as well as the fcoe_ctlr_device's enabled attribute. The link must be up and the fcoe_ctlr_device must be enabled before the FCoE Controller starts discovery or login. Signed-off-by: Robert Love <robert.w.love@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com>
2012-12-14libfcoe, fcoe, bnx2fc: Add new fcoe control interfaceRobert Love3-8/+234
This patch does a few things. 1) Makes /sys/bus/fcoe/ctlr_{create,destroy} interfaces. These interfaces take an <ifname> and will either create an FCoE Controller or destroy an FCoE Controller depending on which file is written to. The new FCoE Controller will start in a DISABLED state and will not do discovery or login until it is ENABLED. This pause will allow us to configure the FCoE Controller before enabling it. 2) Makes the 'mode' attribute of a fcoe_ctlr_device writale. This allows the user to configure the mode in which the FCoE Controller will start in when it is ENABLED. Possible modes are 'Fabric', or 'VN2VN'. The default mode for a fcoe_ctlr{,_device} is 'Fabric'. Drivers must implement the set_fcoe_ctlr_mode routine to support this feature. libfcoe offers an exported routine to set a FCoE Controller's mode. The mode can only be changed when the FCoE Controller is DISABLED. This patch also removes the get_fcoe_ctlr_mode pointer in the fcoe_sysfs function template, the code in fcoe_ctlr.c to get the mode and the assignment of the fcoe_sysfs function pointer to the fcoe_ctlr.c implementation (in fcoe and bnx2fc). fcoe_sysfs can return that value for the mode without consulting the LLD. 3) Make a 'enabled' attribute of a fcoe_ctlr_device. On a read, fcoe_sysfs will return the attribute's value. On a write, fcoe_sysfs will call the LLD (if there is a callback) to notifiy that the enalbed state has changed. This patch maintains the old FCoE control interfaces as module parameters, but it adds comments pointing out that the old interfaces are deprecated. Signed-off-by: Robert Love <robert.w.love@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com>
2012-12-14libfcoe: Add fcoe_sysfs debug logging levelRobert Love2-3/+15
Add a macro to print fcoe_sysfs debug statements. Signed-off-by: Robert Love <robert.w.love@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com>
2012-12-04libfcoe: Save some memory and optimize name lookupsRobert Love1-28/+16
Instead of creating a structure with an enum and a pointer to a string, simply allocate an array of strings and use the enum values for the indicies. This means that we do not need to iterate through the list of entries when looking up a string name by its enum key. This will also help with a latter patch that will add more fcoe_sysfs attributes that will also use the fcoe_enum_name_search macro. One attribute will also do a reverse lookup which requires less code when the enum-to-string mappings are organized as this patch makes them to be. Signed-off-by: Robert Love <robert.w.love@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com>
2012-10-07[SCSI] fcoe: Fix write errors on NPIV portsNeerav Parikh2-9/+7
SCSI errors were generated while writing to LUNs connected via NPIV ports. Debugging this it was found that the FCoE packets transmitted via the NPIV ports were not tagged with correct user priority as negotiated with peer by DCB agent. This resulted in FCoE traffic going with priority zero(0) that did not have priority flow control (PFC) enabled for it. The initiator after transferring data to the target never saw any reply indicating the transfer was complete. This resulted in error recovery (ABTS) and SCSI command retries by the scsi-mid layer; eventually resulting in I/O errors. This patch fixes this issue by keeping the FCoE user priority information in the fcoe_interface instance that is common for both the physical port as well as NPIV ports connected to that physical port; instead of storing it in fcoe_port structure that has a per port instance. Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com> Acked-by: Yi Zou <yi.zou@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] fcoe: Cleanup locking on fcoe_percpu_receive_threadNeil Horman1-8/+10
Noticed that we can shuffle the code around in fcoe_percpu_receive_thread a bit and avoid taking the fcoe_rx_list lock twice per iteration. This should improve throughput somewhat. With this change we take the lock, and check for new frames in a single critical section. Only if the list is empty do we drop the lock and re-acquire it after being signaled to wake up. Change Notes: v2) did some further cleanup on the patch by replacing the 2nd call of spin_lock/splice_init with a goto to the top of the outer loop. This allows me to change the inner while loop to an if conditional and remove the sencond check of kthread_should_stop. Based on suggestion from Vasu Dev. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] fcoe: Remove redundant 'less than zero' checkRobert Love1-1/+1
strtoul returns an 'unsigned long' so there is no reason to check if the value is less than zero. strtoul already checks for the '-' character deep in its bowels. It will return an error if the user has provided a negative value and fcoe_str_to_dev_loss will return that error to its caller. This patch fixes the following Coverity reported warning: CID 703581 - NO_EFFECT Unsigned compared against 0 - This less-than-zero comparison of an unsigned value is never true. "*val < 0UL". drivers/scsi/fcoe/fcoe_sysfs.c:105 Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] libfcoe: Fix section mismatchMark Rustad1-1/+1
Recent changes to add fcoe_sysfs caused libfcoe_init to call fcoe_transport_exit in a module initialization routine. The change resulted in the below error. This patch removes the __exit keyword from the fcoe_transport_exit definition such that it may be called from an __init routine. WARNING: drivers/scsi/fcoe/libfcoe.o(.init.text+0x21): Section mismatch in reference from the function init_module() to the function .exit.text:fcoe_transp exit() The function __init init_module() references a function __exit fcoe_transport_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __exit annotation of fcoe_transport_exit() so it may be used outside an exit section. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] libfc, fcoe, bnx2fc: cleanup fcoe_dev_statsVasu Dev3-21/+20
The libfc is used by fcoe but fcoe agnostic, and therefore should not have any fcoe references. So renaming fcoe_dev_stats from libfc as its for fc_stats. After that libfc is fcoe string free except some strings for Open-FCoE.org. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Acked-by : Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Acked-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-23[SCSI] fcoe, bnx2fc, libfcoe: SW FCoE and bnx2fc use FCoE SyfsRobert Love2-21/+209
This patch has the SW FCoE driver and the bnx2fc driver make use of the new fcoe_sysfs API added earlier in this patch series. After this patch a fcoe_ctlr_device is allocated with private data in this order. +------------------+ +------------------+ | fcoe_ctlr_device | | fcoe_ctlr_device | +------------------+ +------------------+ | fcoe_ctlr | | fcoe_ctlr | +------------------+ +------------------+ | fcoe_interface | | bnx2fc_interface | +------------------+ +------------------+ libfcoe also takes part in this new model since it discovers and manages fcoe_fcf instances. The memory allocation is different for FCFs. I didn't want to impact libfcoe's fcoe_fcf processing, so this patch creates fcoe_fcf_device instances for each discovered fcoe_fcf. The two are paired using a (void * priv) member of the fcoe_ctlr_device. This allows libfcoe to continue maintaining its list of fcoe_fcf instances and simply attaches and detaches them from existing or new fcoe_fcf_device instances. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-23[SCSI] libfcoe: Add fcoe_sysfsRobert Love3-3/+844
This patch adds a 'fcoe bus' infrastructure to the kernel that is driven by changes to libfcoe which allow LLDs to present FIP (FCoE Initialization Protocol) discovered entities and their attributes to user space via sysfs. This patch adds the following APIs- fcoe_ctlr_device_add fcoe_ctlr_device_delete fcoe_fcf_device_add fcoe_fcf_device_delete They allow the LLD to expose the FCoE ENode Controller and any discovered FCFs (Fibre Channel Forwarders, e.g. FCoE switches) to the user. Each of these new devices has their own bus_type so that they are grouped together for easy lookup from a user space application. Each new class has an attribute_group to expose attributes for any created instances. The attributes are- fcoe_ctlr_device * fcf_dev_loss_tmo * lesb_link_fail * lesb_vlink_fail * lesb_miss_fka * lesb_symb_err * lesb_err_block * lesb_fcs_error fcoe_fcf_device * fabric_name * switch_name * priority * selected * fc_map * vfid * mac * fka_peroid * fabric_state * dev_loss_tmo A device loss infrastructre similar to the FC Transport's is also added by this patch. It is nice to have so that a link flapping adapter doesn't continually advance the count used to identify the discovered FCF. FCFs will exist in a "Disconnected" state until either the timer expires or the FCF is rediscovered and becomes "Connected." This patch generates a few checkpatch.pl WARNINGS that I'm not sure what to do about. They're macros modeled around the FC Transport attribute building macros, which have the same 'feature' where the caller can ommit a cast in the argument list and no cast occurs in the code. I'm not sure how to keep the code condensed while keeping the macros. Any advice would be appreciated. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-23[SCSI] fcoe: Allocate fcoe_ctlr with fcoe_interface, not as a memberRobert Love2-52/+93
Currently the fcoe_ctlr associated with an interface is allocated as a member of struct fcoe_interface. This causes problems when attempting to use the new fcoe_sysfs APIs which allow us to allocate the fcoe_interface as private data to the fcoe_ctlr_device instance. The problem is that libfcoe wants to be able use pointer math to find a fcoe_ctlr's fcoe_ctlr_device as well as finding a fcoe_ctlr_device's assocated fcoe_ctlr. To do this we need to allocate the fcoe_ctlr_device, with private data for the LLD. The private data contains the fcoe_ctlr and its private data is the fcoe_interface. This patch only allocates the fcoe_interface with the fcoe_ctlr, the fcoe_ctlr_device will be added in a later patch, which will complete the below diagram- +------------------+ | fcoe_ctlr_device | +------------------+ | fcoe_ctlr | +------------------+ | fcoe_interface | +------------------+ This prep work will allow us to go from a fcoe_ctlr_device instance to its fcoe_ctlr as well as from a fcoe_ctlr to its fcoe_ctlr_device once the fcoe_sysfs API is in use (later patches in this series). Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-10[SCSI] fcoe: remove a stray unlockDan Carpenter1-3/+2
We moved the locking in dd060e74fb "[SCSI] fcoe: remove frame dropping code from fcoe_percpu_clean" but this unlock was missed. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-10[SCSI] libfcoe: fix VN2VN N_Port_ID Beacon source MACYi Zou1-1/+7
FC-BB-6 v1.04 7.9.8.14 N_Port_ID Beacon: "A N_Port_ID Beacon is multicast and uses the VN_Port MAC address as source address." Currently, libfcoe is using ENode MAC, this seems ok and functionality wise not a problem in my back to back testing setup, however, just fix this to make libfcoe VN2VN support more spec compliant. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-10[SCSI] fcoe: Don't hold rtnl_mutex in fcoe_update_src_macRobert Love1-2/+0
The rtnl_mutex was held to protect calls to dev_uc_add and dev_uc_del. Holding rtnl is not required as those functions make use of the netif_addr_lock* API to protect the MAC changing. This change fixes the following regression by removing the rtnl usage when fcoe_update_src_mac is called. https://bugzilla.kernel.org/show_bug.cgi?id=42918 the existing dependency chain (in reverse order) is: -> #1 (&fip->ctlr_mutex){+.+...}: [<c1091f70>] lock_acquire+0x80/0x1b0 [<c147655d>] mutex_lock_nested+0x6d/0x340 [<f8970c32>] fcoe_ctlr_link_up+0x22/0x180 [libfcoe] [<f894620e>] fcoe_create+0x47e/0x6e0 [fcoe] [<f8973dd3>] fcoe_transport_create+0x143/0x250 [libfcoe] [<c10527e0>] param_attr_store+0x30/0x60 [<c1052696>] module_attr_store+0x26/0x40 [<c11a201e>] sysfs_write_file+0xae/0x100 [<c11449df>] vfs_write+0x8f/0x160 [<c1144cbd>] sys_write+0x3d/0x70 [<c147a0c4>] syscall_call+0x7/0xb -> #0 (rtnl_mutex){+.+.+.}: [<c109164b>] __lock_acquire+0x140b/0x1720 [<c1091f70>] lock_acquire+0x80/0x1b0 [<c147655d>] mutex_lock_nested+0x6d/0x340 [<c13a10c4>] rtnl_lock+0x14/0x20 [<f89445ac>] fcoe_update_src_mac+0x2c/0xb0 [fcoe] [<f8971712>] fcoe_ctlr_timer_work+0x712/0xb60 [libfcoe] [<c104fb69>] process_one_work+0x179/0x5d0 [<c10502f1>] worker_thread+0x121/0x2d0 [<c10550ed>] kthread+0x7d/0x90 [<c1481a82>] kernel_thread_helper+0x6/0x10 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fip->ctlr_mutex); lock(rtnl_mutex); lock(&fip->ctlr_mutex); lock(rtnl_mutex); *** DEADLOCK *** Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-10[SCSI] libfc: defer releasing master lport until complete fcoe interface ↵Vasu Dev1-2/+7
cleanuped up The fcoe controller has back references, therefore defer releasing master lport which gets freed along scsi_host_put and then free it once fcoe interface is fully cleaned. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-10[SCSI] fcoe: remove lport from net device before doing per cpu rx thread cleanupVasu Dev2-5/+24
Remove lport from net device and then do synchronize net device to flush inflight rx frames for the lport before doing fcoe_percpu_clean. In case of master lport, remove all rx packet handlers completely and then only do fcoe_percpu_clean. This required splitting fcoe_interface_cleanup to do remove part separately and for that added func fcoe_interface_remove and then call it from fcoe_if_destory before doing fcoe_percpu_clean. However if fcoe_interface_remove() is already called then don't call again from fcoe_interface_cleanup() to preserve its existing flows. This patch along with Neil's other patch to avoid soft irq context on ingress will avoid passing up frames on disabled lport as discussed in this mail thread:- http://lists.open-fcoe.org/pipermail/devel/2012-February/011947.html Signed-off-by: Vasu Dev <vasu.dev@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-01Merge tag 'scsi-misc' of ↵Linus Torvalds2-58/+63
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 Pull SCSI updates from James Bottomley: "This is primarily another round of driver updates (lpfc, bfa, fcoe, ipr) plus a new ufshcd driver. There shouldn't be anything controversial in here (The final deletion of scsi proc_ops which caused some build breakage has been held over until the next merge window to give us more time to stabilise it). I'm afraid, with me moving continents at exactly the wrong time, anything submitted after the merge window opened has been held over to the next merge window." * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (63 commits) [SCSI] ipr: Driver version 2.5.3 [SCSI] ipr: Increase alignment boundary of command blocks [SCSI] ipr: Increase max concurrent oustanding commands [SCSI] ipr: Remove unnecessary memory barriers [SCSI] ipr: Remove unnecessary interrupt clearing on new adapters [SCSI] ipr: Fix target id allocation re-use problem [SCSI] atp870u, mpt2sas, qla4xxx use pci_dev->revision [SCSI] fcoe: Drop the rtnl_mutex before calling fcoe_ctlr_link_up [SCSI] bfa: Update the driver version to 3.0.23.0 [SCSI] bfa: BSG and User interface fixes. [SCSI] bfa: Fix to avoid vport delete hang on request queue full scenario. [SCSI] bfa: Move service parameter programming logic into firmware. [SCSI] bfa: Revised Fabric Assigned Address(FAA) feature implementation. [SCSI] bfa: Flash controller IOC pll init fixes. [SCSI] bfa: Serialize the IOC hw semaphore unlock logic. [SCSI] bfa: Modify ISR to process pending completions [SCSI] bfa: Add fc host issue lip support [SCSI] mpt2sas: remove extraneous sas_log_info messages [SCSI] libfc: fcoe_transport_create fails in single-CPU environment [SCSI] fcoe: reduce contention for fcoe_rx_list lock [v2] ...
2012-03-28[SCSI] fcoe: Drop the rtnl_mutex before calling fcoe_ctlr_link_upRobert Love1-1/+5
The rtnl_lock is primarily used to serialize networking driver changes as well as to ensure that a networking driver is not removed when making changes to it. fcoe also uses the rtnl_lock to protect the fcoe hostlist. fcoe_create holds the rtnl_lock over the entirity of the routine including a the call to fcoe_ctlr_link_up. This causes the below deadlock because fcoe_ctlr_link_up acquires the fcoe_ctlr ctlr_mutex and this deadlocks with a libfcoe thread that acquires the fcoe_ctlr ctlr_mutex and then the rtnl_lock (to update a MAC address). This patch drops the rtnl_lock before calling fcoe_ctlr_link_up and therefore the deadlock is prevented. https://bugzilla.kernel.org/show_bug.cgi?id=42918 the existing dependency chain (in reverse order) is: -> #1 (&fip->ctlr_mutex){+.+...}: [<c1091f70>] lock_acquire+0x80/0x1b0 [<c147655d>] mutex_lock_nested+0x6d/0x340 [<f8970c32>] fcoe_ctlr_link_up+0x22/0x180 [libfcoe] [<f894620e>] fcoe_create+0x47e/0x6e0 [fcoe] [<f8973dd3>] fcoe_transport_create+0x143/0x250 [libfcoe] [<c10527e0>] param_attr_store+0x30/0x60 [<c1052696>] module_attr_store+0x26/0x40 [<c11a201e>] sysfs_write_file+0xae/0x100 [<c11449df>] vfs_write+0x8f/0x160 [<c1144cbd>] sys_write+0x3d/0x70 [<c147a0c4>] syscall_call+0x7/0xb -> #0 (rtnl_mutex){+.+.+.}: [<c109164b>] __lock_acquire+0x140b/0x1720 [<c1091f70>] lock_acquire+0x80/0x1b0 [<c147655d>] mutex_lock_nested+0x6d/0x340 [<c13a10c4>] rtnl_lock+0x14/0x20 [<f89445ac>] fcoe_update_src_mac+0x2c/0xb0 [fcoe] [<f8971712>] fcoe_ctlr_timer_work+0x712/0xb60 [libfcoe] [<c104fb69>] process_one_work+0x179/0x5d0 [<c10502f1>] worker_thread+0x121/0x2d0 [<c10550ed>] kthread+0x7d/0x90 [<c1481a82>] kernel_thread_helper+0x6/0x10 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fip->ctlr_mutex); lock(rtnl_mutex); lock(&fip->ctlr_mutex); lock(rtnl_mutex); *** DEADLOCK *** Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-28[SCSI] fcoe: reduce contention for fcoe_rx_list lock [v2]Neil Horman1-8/+14
There is potentially lots of contention for the rx_list_lock. On a cpu that is receiving lots of fcoe traffic, the softirq context has to add and release the lock for every frame it receives, as does the receiving per-cpu thread. We can reduce this contention somewhat by altering the per-cpu threads loop such that when traffic is detected on the fcoe_rx_list, we splice it to a temporary list. In this way, we can process multiple skbs while only having to acquire and release the fcoe_rx_list lock once. [ Braces around single statement while loop removed by Robert Love to satisfy checkpath.pl. ] Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-28[SCSI] fcoe: remove frame dropping code from fcoe_percpu_cleanNeil Horman1-19/+3
commit e7a51997dad4e17395be1209970e18d2e9305b24 ([SCSI] fcoe: flush per-cpu thread work when destroying interface) added a skb flush to the fcoe_rx_list, which ensures that we push any pending frames on the list through the per-cpu receive thread. Because of this, its redundant to lock and scan the list first, dropping any arriving frames. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-28[SCSI] foce: remove bh disable from fcoe sw transport rcv functionNeil Horman1-5/+5
The fcoe sw recive packet function (fcoe_rcv) only ever executes in softirq context. Given that, and the fact that no use of the fcoe_rx_list is made in irq context, its not necessecary to disable bottom halves while actually receiving the frame. Convert spin_*_bh calls in that function to their lock-only equivalents Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-28[SCSI] libfcoe: Support extra MAC descriptor to be used as FCoE MACBhanu Prakash Gollapudi1-5/+23
Some switch implementations (eg., HP virtual connect FlexFabric) send two MAC descriptors in FIP FLOGI response, with first MAC descriptor (granted_mac) used as FPMA, and the second one (fcoe_mac) used as destination address for sending/receiving FCoE packets. fip_mac continues to be used for FIP traffic. This patch introduces fcoe_mac in fcoe_fcf structure. For regular switches, both fcoe_mac and fip_mac will be the same. For the switches that send additional MAC descriptor, fcoe_mac is updated. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-28[SCSI] libfcoe: Do not sends FDISCs before FLOGI during CVLBhanu Prakash Gollapudi1-5/+5
When handling CVL with no Vx port descriptors, lports for NPIV ports are reset before issuing the ctlr_reset. This causes FDISCs to be issued before successful FLOGI. Fix it by resetting the controller before resetting the lports. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-28[SCSI] fcoe: Ensure fcoe_recv_frame is always called in process contextNeil Horman1-17/+10
commit 859b7b649ab58ee5cbfb761491317d5b315c1b0f introduced the ability to call fcoe_recv_frame in softirq context. While this is beneficial to performance, its not safe to do, as it breaks the serialization of access to the lport structure (i.e. when an fcoe interface is being torn down, theres no way to serialize the teardown effort with the completion of receieve operations occuring in softirq context. As a result, lport (and other) data structures can be read and modified in parallel leading to corruption. Most notable is the vport list, which is protected by a mutex, that will cause a panic if a softirq receive while said mutex is locked. Additionaly, the ema_list, discussed here: http://lists.open-fcoe.org/pipermail/devel/2012-February/011947.html Can be corrupted if a list traversal occurs in softirq context at the same time as a list delete in process context. And generally the lport state variables will not be stable, and may lead to unpredictable results. The most direct fix is to remove the bits from the above commit that allowed fcoe_recv_frame to be called in softirq context. We just force all frames to be handled by the per-cpu rx threads. This will allow the fcoe_if_destroy's use of fcoe_percpu_clean to function properly, ensuring that no frames are being received while the lport is being torn down. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reviewed-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-22Merge tag 'scsi-misc' of ↵Linus Torvalds3-60/+114
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 SCSI updates from James Bottomley: "The update includes the usual assortment of driver updates (lpfc, qla2xxx, qla4xxx, bfa, bnx2fc, bnx2i, isci, fcoe, hpsa) plus a huge amount of infrastructure work in the SAS library and transport class as well as an iSCSI update. There's also a new SCSI based virtio driver." * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (177 commits) [SCSI] qla4xxx: Update driver version to 5.02.00-k15 [SCSI] qla4xxx: trivial cleanup [SCSI] qla4xxx: Fix sparse warning [SCSI] qla4xxx: Add support for multiple session per host. [SCSI] qla4xxx: Export CHAP index as sysfs attribute [SCSI] scsi_transport: Export CHAP index as sysfs attribute [SCSI] qla4xxx: Add support to display CHAP list and delete CHAP entry [SCSI] iscsi_transport: Add support to display CHAP list and delete CHAP entry [SCSI] pm8001: fix endian issue with code optimization. [SCSI] pm8001: Fix possible racing condition. [SCSI] pm8001: Fix bogus interrupt state flag issue. [SCSI] ipr: update PCI ID definitions for new adapters [SCSI] qla2xxx: handle default case in qla2x00_request_firmware() [SCSI] isci: improvements in driver unloading routine [SCSI] isci: improve phy event warnings [SCSI] isci: debug, provide state-enum-to-string conversions [SCSI] scsi_transport_sas: 'enable' phys on reset [SCSI] libsas: don't recover end devices attached to disabled phys [SCSI] libsas: fixup target_port_protocols for expanders that don't report sata [SCSI] libsas: set attached device type and target protocols for local phys ...
2012-03-21Merge branch 'kmap_atomic' of git://github.com/congwang/linuxLinus Torvalds2-5/+4
Pull kmap_atomic cleanup from Cong Wang. It's been in -next for a long time, and it gets rid of the (no longer used) second argument to k[un]map_atomic(). Fix up a few trivial conflicts in various drivers, and do an "evil merge" to catch some new uses that have come in since Cong's tree. * 'kmap_atomic' of git://github.com/congwang/linux: (59 commits) feature-removal-schedule.txt: schedule the deprecated form of kmap_atomic() for removal highmem: kill all __kmap_atomic() [swarren@nvidia.com: highmem: Fix ARM build break due to __kmap_atomic rename] drbd: remove the second argument of k[un]map_atomic() zcache: remove the second argument of k[un]map_atomic() gma500: remove the second argument of k[un]map_atomic() dm: remove the second argument of k[un]map_atomic() tomoyo: remove the second argument of k[un]map_atomic() sunrpc: remove the second argument of k[un]map_atomic() rds: remove the second argument of k[un]map_atomic() net: remove the second argument of k[un]map_atomic() mm: remove the second argument of k[un]map_atomic() lib: remove the second argument of k[un]map_atomic() power: remove the second argument of k[un]map_atomic() kdb: remove the second argument of k[un]map_atomic() udf: remove the second argument of k[un]map_atomic() ubifs: remove the second argument of k[un]map_atomic() squashfs: remove the second argument of k[un]map_atomic() reiserfs: remove the second argument of k[un]map_atomic() ocfs2: remove the second argument of k[un]map_atomic() ntfs: remove the second argument of k[un]map_atomic() ...
2012-03-20scsi: remove the second argument of k[un]map_atomic()Cong Wang2-5/+4
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on txYi Zou1-1/+1
Fix a bug when using 'ethtool -K ethx tx off' to turn off tx ip checksum, FCoE CRC offload should not be impacte. The skb_checksum_help() is needed only if it's not FCoE traffic for ip checksum, regardless of ethtool toggling the tx ip checksum on or off. Instead of using CHECKSUM_PARTIAL, we will use CHECKSUM_UNNECESSARY as a proper indication to avoid sw ip checksum on FCoE frames. Ref. to original discussion thread: http://patchwork.ozlabs.org/patch/146567/ CC: "James E.J. Bottomley" <JBottomley@parallels.com> CC: Robert Love <robert.w.love@intel.com> Signed-off-by: Yi Zou <yi.zou@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-19[SCSI] fcoe: Remove reference counting on 'stuct fcoe_interface'Robert Love2-46/+5
The reference counting was necessary on these instances because it was possible for NPIV ports to be destroyed after the N_Port. A previous patch ensures that all NPIV ports are destroyed before the N_Port making the need to track references on the interface unnecessary. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] fcoe: Do not switch context in vport_delete callbackRobert Love1-9/+6
Currently all port deletion is routed though the FCoE workqueue (fcoe_wq). When fc_remove_host is called on an N_Port (for example, from fcoe_destroy) the vports are queued into a FC Transport workqueue. fc_remove_host flushes that queue and each vport is passed to fcoe's fcoe_vport_destroy, which simply queues the associated fcoe_ports for later deletion. This queue cannot be flushed within the N_Ports destroy path because of circular locking issues. The result is that the NPIV ports are destroyed after the N_Port, which is reverse of how they are created. This quirk causes fcoe to keep references on the fcoe_interface shared by each of these ports (N_Port and NPIV). Changing the ordering such that NPIV ports are destroyed before the N_Port will allow us to remove reference counting on the fcoe_interface instances. This patch simply allows fcoe_vport_destory to destroy NPIV ports without deferring them to a workqueue context. This ensures that when fc_remove_host is called the NPIV ports will be destroyed first before the N_Port and allows reference counting on the fcoe's fcoe_interface to be remove in a later patch. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] fcoe: Rename out_nomod label to out_putmodRobert Love1-3/+3
The label implies that it should be called when there is 'nomod.' I read that to mean that the module reference 'get' failed. However, it's only called when the module reference 'get' succeeded. I think it makes more sense to name the label, 'out_putmod' since it should be called when we need to 'put' the module reference taken in the routine before returning. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>