summaryrefslogtreecommitdiff
path: root/drivers/scsi/fcoe
AgeCommit message (Collapse)AuthorFilesLines
2022-06-28scsi: fcoe: Remove redundant assignment to variable 'wlen'Colin Ian King1-1/+0
Variable wlen is being assigned a value that is never read, it is being re-assigned with a different value later on. The assignment is redundant and can be removed. Cleans up clang scan build warning: drivers/scsi/fcoe/fcoe.c:1491:2: warning: Value stored to 'wlen' is never read [deadcode.DeadStores] Link: https://lore.kernel.org/r/20220623164710.76831-1-colin.i.king@gmail.com Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-26Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds3-47/+29
Pull SCSI updates from James Bottomley: "This consists of a small set of driver updates (lpfc, ufs, mpt3sas mpi3mr, iscsi target). Apart from that this is mostly small fixes with very few core changes (the biggest one being VPD caching)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (177 commits) scsi: target: tcmu: Avoid holding XArray lock when calling lock_page scsi: elx: efct: Remove NULL check after calling container_of() scsi: dpt_i2o: Drop redundant spinlock initialization scsi: qedf: Remove redundant variable op scsi: hisi_sas: Fix memory ordering in hisi_sas_task_deliver() scsi: fnic: Replace DMA mask of 64 bits with 47 bits scsi: mpi3mr: Add target device related sysfs attributes scsi: mpi3mr: Add shost related sysfs attributes scsi: elx: efct: Remove redundant memset() statement scsi: megaraid_sas: Remove redundant memset() statement scsi: mpi3mr: Return error if dma_alloc_coherent() fails scsi: hisi_sas: Fix rescan after deleting a disk scsi: hisi_sas: Use sas_ata_wait_after_reset() in IT nexus reset scsi: libsas: Refactor sas_ata_hard_reset() scsi: mpt3sas: Update driver version to 42.100.00.00 scsi: mpt3sas: Fix junk chars displayed while printing ChipName scsi: ipr: Use kobj_to_dev() scsi: mpi3mr: Fix a NULL vs IS_ERR() bug in mpi3mr_bsg_init() scsi: bnx2fc: Avoid using get_cpu() in bnx2fc_cmd_alloc() scsi: libfc: Remove get_cpu() semantics in fc_exch_em_alloc() ...
2022-05-25Merge tag 'Wstringop-overflow-fixes-5.19-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull Wstringop-overflow fixes from Gustavo Silva: "Fix some -Wstringop-overflow warnings when building with GCC-11. All the patches have been in linux-next during the last development cycle. This is part of the ongoing efforts to globally enable -Wstringop-overflow" * tag 'Wstringop-overflow-fixes-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: drm/i915: Fix -Wstringop-overflow warning in call to intel_read_wm_latency() drm/amd/display: Fix Wstringop-overflow warnings in dc_link_dp.c scsi: fcoe: Fix Wstringop-overflow warnings in fcoe_wwn_from_mac()
2022-05-17scsi: fcoe: Use per-CPU API to update per-CPU statisticsSebastian Andrzej Siewior3-44/+24
The per-CPU statistics (struct fc_stats) is updated by getting a stable per-CPU pointer via get_cpu() + per_cpu_ptr() and then performing the increment. This can be optimized by using this_cpu_*() which will do whatever is needed on the architecture to perform the update safe and efficient. The read out of the individual value (fc_get_host_stats()) should be done by using READ_ONCE() instead of a plain-C access. The difference is that READ_ONCE() will always perform a single access while the plain-C access can be split by the compiler into two loads if it appears beneficial. The usage of u64 has the side-effect that it is also 64bit wide on 32bit architectures and the read is always split into two loads. The can lead to strange values if the read happens during an update which alters both 32bit parts of the 64bit value. This can be circumvented by either using a 32bit variables on 32bit architecures or extending the statistics with a sequence counter. Use this_cpu_*() API to update the statistics and READ_ONCE() to read it. Link: https://lore.kernel.org/r/20220506105758.283887-3-bigeasy@linutronix.de Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-17scsi: fcoe: Add a local_lock to fcoe_percpuDavidlohr Bueso1-2/+4
fcoe_get_paged_crc_eof() relies on the caller having preemption disabled to ensure the per-CPU fcoe_percpu context remains valid throughout the call. This is done by either holding spinlocks (such as bnx2fc_global_lock or qedf_global_lock) or the get_cpu() from fcoe_alloc_paged_crc_eof(). This last one breaks PREEMPT_RT semantics as there can be memory allocation and end up sleeping in atomic contexts. Introduce a local_lock_t to struct fcoe_percpu that will keep the non-RT case the same, mapping to preempt_disable/enable, while RT will use a per-CPU spinlock allowing the region to be preemptible but still maintain CPU locality. The other users of fcoe_percpu are already safe in this regard and do not require local_lock()ing. Link: https://lore.kernel.org/r/20211117025956.79616-3-dave@stgolabs.net Link: https://lore.kernel.org/r/20220506105758.283887-2-bigeasy@linutronix.de Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-16net: allow gso_max_size to exceed 65536Alexander Duyck1-1/+1
The code for gso_max_size was added originally to allow for debugging and workaround of buggy devices that couldn't support TSO with blocks 64K in size. The original reason for limiting it to 64K was because that was the existing limits of IPv4 and non-jumbogram IPv6 length fields. With the addition of Big TCP we can remove this limit and allow the value to potentially go up to UINT_MAX and instead be limited by the tso_max_size value. So in order to support this we need to go through and clean up the remaining users of the gso_max_size value so that the values will cap at 64K for non-TCPv6 flows. In addition we can clean up the GSO_MAX_SIZE value so that 64K becomes GSO_LEGACY_MAX_SIZE and UINT_MAX will now be the upper limit for GSO_MAX_SIZE. v6: (edumazet) fixed a compile error if CONFIG_IPV6=n, in a new sk_trim_gso_size() helper. netif_set_tso_max_size() caps the requested TSO size with GSO_MAX_SIZE. Signed-off-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-26scsi: fcoe: Fix Wstringop-overflow warnings in fcoe_wwn_from_mac()Gustavo A. R. Silva1-1/+1
Fix the following Wstringop-overflow warnings when building with GCC-11: drivers/scsi/fcoe/fcoe.c: In function ‘fcoe_netdev_config’: drivers/scsi/fcoe/fcoe.c:744:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=] 744 | wwnn = fcoe_wwn_from_mac(ctlr->ctl_src_addr, 1, 0); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/fcoe/fcoe.c:744:32: note: referencing argument 1 of type ‘unsigned char *’ In file included from drivers/scsi/fcoe/fcoe.c:36: ./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int); | ^~~~~~~~~~~~~~~~~ drivers/scsi/fcoe/fcoe.c:747:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=] 747 | wwpn = fcoe_wwn_from_mac(ctlr->ctl_src_addr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 748 | 2, 0); | ~~~~~ drivers/scsi/fcoe/fcoe.c:747:32: note: referencing argument 1 of type ‘unsigned char *’ In file included from drivers/scsi/fcoe/fcoe.c:36: ./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int); | ^~~~~~~~~~~~~~~~~ CC drivers/scsi/bnx2fc/bnx2fc_io.o In function ‘bnx2fc_net_config’, inlined from ‘bnx2fc_if_create’ at drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1543:7: drivers/scsi/bnx2fc/bnx2fc_fcoe.c:833:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=] 833 | wwnn = fcoe_wwn_from_mac(ctlr->ctl_src_addr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 834 | 1, 0); | ~~~~~ drivers/scsi/bnx2fc/bnx2fc_fcoe.c: In function ‘bnx2fc_if_create’: drivers/scsi/bnx2fc/bnx2fc_fcoe.c:833:32: note: referencing argument 1 of type ‘unsigned char *’ In file included from drivers/scsi/bnx2fc/bnx2fc.h:53, from drivers/scsi/bnx2fc/bnx2fc_fcoe.c:17: ./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int); | ^~~~~~~~~~~~~~~~~ In function ‘bnx2fc_net_config’, inlined from ‘bnx2fc_if_create’ at drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1543:7: drivers/scsi/bnx2fc/bnx2fc_fcoe.c:839:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=] 839 | wwpn = fcoe_wwn_from_mac(ctlr->ctl_src_addr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 840 | 2, 0); | ~~~~~ drivers/scsi/bnx2fc/bnx2fc_fcoe.c: In function ‘bnx2fc_if_create’: drivers/scsi/bnx2fc/bnx2fc_fcoe.c:839:32: note: referencing argument 1 of type ‘unsigned char *’ In file included from drivers/scsi/bnx2fc/bnx2fc.h:53, from drivers/scsi/bnx2fc/bnx2fc_fcoe.c:17: ./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int); | ^~~~~~~~~~~~~~~~~ drivers/scsi/qedf/qedf_main.c: In function ‘__qedf_probe’: drivers/scsi/qedf/qedf_main.c:3520:30: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=] 3520 | qedf->wwnn = fcoe_wwn_from_mac(qedf->mac, 1, 0); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/qedf/qedf_main.c:3520:30: note: referencing argument 1 of type ‘unsigned char *’ In file included from drivers/scsi/qedf/qedf.h:9, from drivers/scsi/qedf/qedf_main.c:23: ./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int); | ^~~~~~~~~~~~~~~~~ drivers/scsi/qedf/qedf_main.c:3521:30: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=] 3521 | qedf->wwpn = fcoe_wwn_from_mac(qedf->mac, 2, 0); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/qedf/qedf_main.c:3521:30: note: referencing argument 1 of type ‘unsigned char *’ In file included from drivers/scsi/qedf/qedf.h:9, from drivers/scsi/qedf/qedf_main.c:23: ./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int); | ^~~~~~~~~~~~~~~~~ by changing the array size to the correct value of ETH_ALEN in the argument declaration. Also, fix a couple of checkpatch warnings: WARNING: function definition argument 'unsigned int' should also have an identifier name This helps with the ongoing efforts to globally enable -Wstringop-overflow. Link: https://github.com/KSPP/linux/issues/181 Fixes: 85b4aa4926a5 ("[SCSI] fcoe: Fibre Channel over Ethernet") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2022-04-19scsi: fcoe: Simplify if-if to if-elseYihao Han1-1/+1
Replace 'if (!is_zero_ether_addr(mac))' with 'else' for simplification and add curly brackets according to the kernel coding style: "Do not unnecessarily use braces where a single statement will do." ... "This does not apply if only one branch of a conditional statement is a single statement; in the latter case use braces in both branches" Please refer to: https://www.kernel.org/doc/html/v5.17-rc8/process/coding-style.html Link: https://lore.kernel.org/r/20220408081237.14037-1-hanyihao@vivo.com Signed-off-by: Yihao Han <hanyihao@vivo.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-23scsi: libfc: Stop using the SCSI pointerBart Van Assche1-0/+1
Move the fc_fcp_pkt pointer, the residual length and the SCSI status into the new data structure libfc_cmd_priv. This patch prepares for removal of the SCSI pointer from struct scsi_cmnd. The user of the libfc data path functions have been identified as follows: $ git grep -lw fc_queuecommand | grep -v scsi/libfc/ drivers/scsi/fcoe/fcoe.c Link: https://lore.kernel.org/r/20220218195117.25689-28-bvanassche@acm.org Cc: Saurav Kashyap <skashyap@marvell.com> Cc: Javed Hasan <jhasan@marvell.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-19scsi: fcoe: Use netif_is_bond_master() instead of open codeMichelleJin1-1/+1
'netdev->priv_flags & IFF_BONDING && netdev->flags & IFF_MASTER' is defined as netif_is_bond_master() in netdevice.h. Replace it to clean up code. Link: https://lore.kernel.org/r/20211015142006.540773-1-shjy180909@gmail.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: MichelleJin <shjy180909@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-08scsi: fcoe: Statically initialize flogi_maddrKees Cook1-4/+2
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy() avoid using an inline const buffer argument and instead just statically initialize the destination array directly. Link: https://lore.kernel.org/r/20210602180000.3326448-1-keescook@chromium.org Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-16scsi: fcoe: Suppress a compiler warningBart Van Assche1-1/+1
Suppress the following compiler warning: warning: cast to smaller integer type 'enum fip_mode' from 'void *' [-Wvoid-pointer-to-enum-cast] enum fip_mode fip_mode = (enum fip_mode)kp->arg; ^~~~~~~~~~~~~~~~~~~~~~ Link: https://lore.kernel.org/r/20210415220826.29438-9-bvanassche@acm.org Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-16scsi: fcoe: Fix a couple of incorrectly named functionsLee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/scsi/fcoe/fcoe_ctlr.c:1314: warning: expecting prototype for fcoe_ctlr_recv_els(). Prototype was for fcoe_ctlr_recv_clr_vlink() instead drivers/scsi/fcoe/fcoe_ctlr.c:2963: warning: expecting prototype for fcoe_ctlr_vlan_disk_reply(). Prototype was for fcoe_ctlr_vlan_disc_reply() instead Link: https://lore.kernel.org/r/20210303144631.3175331-6-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.de> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-16scsi: fcoe: Fix function name fcoe_set_vport_symbolic_name() in descriptionLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/scsi/fcoe/fcoe.c:2782: warning: expecting prototype for fcoe_vport_set_symbolic_name(). Prototype was for fcoe_set_vport_symbolic_name() instead Link: https://lore.kernel.org/r/20210303144631.3175331-4-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.de> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-17Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2-4/+3
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, qla2xxx, smartpqi, target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of cleanups, a major power management rework and a load of assorted minor updates. There are a few core updates (formatting fixes being the big one) but nothing major this cycle" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits) scsi: mpt3sas: Update driver version to 36.100.00.00 scsi: mpt3sas: Handle trigger page after firmware update scsi: mpt3sas: Add persistent MPI trigger page scsi: mpt3sas: Add persistent SCSI sense trigger page scsi: mpt3sas: Add persistent Event trigger page scsi: mpt3sas: Add persistent Master trigger page scsi: mpt3sas: Add persistent trigger pages support scsi: mpt3sas: Sync time periodically between driver and firmware scsi: qla2xxx: Update version to 10.02.00.104-k scsi: qla2xxx: Fix device loss on 4G and older HBAs scsi: qla2xxx: If fcport is undergoing deletion complete I/O with retry scsi: qla2xxx: Fix the call trace for flush workqueue scsi: qla2xxx: Fix flash update in 28XX adapters on big endian machines scsi: qla2xxx: Handle aborts correctly for port undergoing deletion scsi: qla2xxx: Fix N2N and NVMe connect retry failure scsi: qla2xxx: Fix FW initialization error on big endian machines scsi: qla2xxx: Fix crash during driver load on big endian machines scsi: qla2xxx: Fix compilation issue in PPC systems scsi: qla2xxx: Don't check for fw_started while posting NVMe command scsi: qla2xxx: Tear down session if FW say it is down ...
2020-11-24net: don't include ethtool.h from netdevice.hJakub Kicinski1-0/+1
linux/netdevice.h is included in very many places, touching any of its dependecies causes large incremental builds. Drop the linux/ethtool.h include, linux/netdevice.h just needs a forward declaration of struct ethtool_ops. Fix all the places which made use of this implicit include. Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20201120225052.1427503-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-05scsi: fcoe: Remove unneeded semicolonTom Rix2-3/+3
A semicolon is not needed after a switch statement. Link: https://lore.kernel.org/r/20201101144017.2284047-1-trix@redhat.com Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-27scsi: Remove unneeded break statementsTom Rix1-1/+0
A break is not needed if it is preceded by a return or goto. Link: https://lore.kernel.org/r/20201019142333.16584-1-trix@redhat.com Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-24Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-7/+1
Pull more SCSI updates from James Bottomley: "The set of core changes here is Christoph's submission path cleanups. These introduced a couple of regressions when first proposed so they got held over from the initial merge window pull request to give more testing time, which they've now had and Syzbot has confirmed the regression it detected is fixed. The other main changes are two driver updates (arcmsr, pm80xx) and assorted minor clean ups" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (38 commits) scsi: qla2xxx: Fix return of uninitialized value in rval scsi: core: Set sc_data_direction to DMA_NONE for no-transfer commands scsi: sr: Initialize ->cmd_len scsi: arcmsr: Update driver version to v1.50.00.02-20200819 scsi: arcmsr: Add support for ARC-1886 series RAID controllers scsi: arcmsr: Fix device hot-plug monitoring timer stop scsi: arcmsr: Remove unnecessary syntax scsi: pm80xx: Driver version update scsi: pm80xx: Increase the number of outstanding I/O supported to 1024 scsi: pm80xx: Remove DMA memory allocation for ccb and device structures scsi: pm80xx: Increase number of supported queues scsi: sym53c8xx_2: Fix sizeof() mismatch scsi: isci: Fix a typo in a comment scsi: qla4xxx: Fix inconsistent format argument type scsi: myrb: Fix inconsistent format argument types scsi: myrb: Remove redundant assignment to variable timeout scsi: bfa: Fix error return in bfad_pci_init() scsi: fcoe: Simplify the return expression of fcoe_sysfs_setup() scsi: snic: Simplify the return expression of svnic_cq_alloc() scsi: fnic: Simplify the return expression of vnic_wq_copy_alloc() ...
2020-10-08scsi: fcoe: Simplify the return expression of fcoe_sysfs_setup()Qinglang Miao1-7/+1
Simplify the return expression. Link: https://lore.kernel.org/r/20200921131102.93084-1-miaoqinglang@huawei.com Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-4/+4
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-05scsi: fcoe: Memory leak fix in fcoe_sysfs_fcf_del()Javed Hasan1-1/+1
In fcoe_sysfs_fcf_del(), we first deleted the fcf from the list and then freed it if ctlr_dev was not NULL. This was causing a memory leak. Free the fcf even if ctlr_dev is NULL. Link: https://lore.kernel.org/r/20200729081824.30996-3-jhasan@marvell.com Reviewed-by: Girish Basrur <gbasrur@marvell.com> Reviewed-by: Santosh Vernekar <svernekar@marvell.com> Reviewed-by: Saurav Kashyap <skashyap@marvell.com> Reviewed-by: Shyam Sundar <ssundar@marvell.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-25scsi: fcoe: Use eth_zero_addr() to clear mac addressMiaohe Lin1-1/+1
Use eth_zero_addr() to clear mac address insetad of memset(). Link: https://lore.kernel.org/r/1595234344-13955-1-git-send-email-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: fcoe: Correct some kernel-doc issuesLee Jones1-1/+3
Mainly due to misdocumentation or bitrotted descriptions. Fixes the following W=1 kernel build warning(s): drivers/scsi/fcoe/fcoe_transport.c:396: warning: Function parameter or member 'skb' not described in 'fcoe_check_wait_queue' drivers/scsi/fcoe/fcoe_transport.c:447: warning: Function parameter or member 't' not described in 'fcoe_queue_timer' drivers/scsi/fcoe/fcoe_transport.c:447: warning: Excess function parameter 'lport' description in 'fcoe_queue_timer' drivers/scsi/fcoe/fcoe_transport.c:682: warning: Function parameter or member 'netdev' not described in 'fcoe_netdev_map_lookup' Link: https://lore.kernel.org/r/20200713074645.126138-7-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: fcoe: Fix a myriad of documentation issuesLee Jones1-14/+14
Mostly missing or incorrect (bitrotted) function parameters. Fixes the following W=1 kernel build warning(s): drivers/scsi/fcoe/fcoe_ctlr.c:139: warning: Function parameter or member 'mode' not described in 'fcoe_ctlr_init' drivers/scsi/fcoe/fcoe_ctlr.c:604: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_encaps' drivers/scsi/fcoe/fcoe_ctlr.c:1312: warning: Function parameter or member 'skb' not described in 'fcoe_ctlr_recv_clr_vlink' drivers/scsi/fcoe/fcoe_ctlr.c:1312: warning: Excess function parameter 'fh' description in 'fcoe_ctlr_recv_clr_vlink' drivers/scsi/fcoe/fcoe_ctlr.c:1781: warning: Function parameter or member 't' not described in 'fcoe_ctlr_timeout' drivers/scsi/fcoe/fcoe_ctlr.c:1781: warning: Excess function parameter 'arg' description in 'fcoe_ctlr_timeout' drivers/scsi/fcoe/fcoe_ctlr.c:1904: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_recv_flogi' drivers/scsi/fcoe/fcoe_ctlr.c:2166: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_disc_stop_locked' drivers/scsi/fcoe/fcoe_ctlr.c:2166: warning: Excess function parameter 'fip' description in 'fcoe_ctlr_disc_stop_locked' drivers/scsi/fcoe/fcoe_ctlr.c:2188: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_disc_stop' drivers/scsi/fcoe/fcoe_ctlr.c:2188: warning: Excess function parameter 'fip' description in 'fcoe_ctlr_disc_stop' drivers/scsi/fcoe/fcoe_ctlr.c:2204: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_disc_stop_final' drivers/scsi/fcoe/fcoe_ctlr.c:2204: warning: Excess function parameter 'fip' description in 'fcoe_ctlr_disc_stop_final' drivers/scsi/fcoe/fcoe_ctlr.c:2273: warning: Function parameter or member 'frport' not described in 'fcoe_ctlr_vn_parse' drivers/scsi/fcoe/fcoe_ctlr.c:2273: warning: Excess function parameter 'rdata' description in 'fcoe_ctlr_vn_parse' drivers/scsi/fcoe/fcoe_ctlr.c:2804: warning: Function parameter or member 'frport' not described in 'fcoe_ctlr_vlan_parse' drivers/scsi/fcoe/fcoe_ctlr.c:2804: warning: Excess function parameter 'rdata' description in 'fcoe_ctlr_vlan_parse' drivers/scsi/fcoe/fcoe_ctlr.c:2900: warning: Excess function parameter 'min_len' description in 'fcoe_ctlr_vlan_send' drivers/scsi/fcoe/fcoe_ctlr.c:2977: warning: Function parameter or member 'fip' not described in 'fcoe_ctlr_vlan_recv' drivers/scsi/fcoe/fcoe_ctlr.c:2977: warning: Function parameter or member 'skb' not described in 'fcoe_ctlr_vlan_recv' drivers/scsi/fcoe/fcoe_ctlr.c:2977: warning: Excess function parameter 'lport' description in 'fcoe_ctlr_vlan_recv' drivers/scsi/fcoe/fcoe_ctlr.c:2977: warning: Excess function parameter 'fp' description in 'fcoe_ctlr_vlan_recv' drivers/scsi/fcoe/fcoe_ctlr.c:3033: warning: Function parameter or member 'callback' not described in 'fcoe_ctlr_disc_start' drivers/scsi/fcoe/fcoe_ctlr.c:3033: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_disc_start' drivers/scsi/fcoe/fcoe_ctlr.c:3033: warning: Excess function parameter 'fip' description in 'fcoe_ctlr_disc_start' [mkp: fixed function name in comment] Link: https://lore.kernel.org/r/20200713074645.126138-6-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: fcoe: Fix various kernel-doc infringementsLee Jones1-6/+4
A couple of headers make no attempt to document their associated function parameters. Others looks as if they are suffering with a little bitrot. Fixes the following W=1 kernel build warning(s): drivers/scsi/fcoe/fcoe.c:654: warning: Function parameter or member 'lport' not described in 'fcoe_netdev_features_change' drivers/scsi/fcoe/fcoe.c:654: warning: Function parameter or member 'netdev' not described in 'fcoe_netdev_features_change' drivers/scsi/fcoe/fcoe.c:2039: warning: Function parameter or member 'ctlr_dev' not described in 'fcoe_ctlr_mode' drivers/scsi/fcoe/fcoe.c:2039: warning: Excess function parameter 'cdev' description in 'fcoe_ctlr_mode' drivers/scsi/fcoe/fcoe.c:2144: warning: Function parameter or member 'fcoe' not described in 'fcoe_dcb_create' drivers/scsi/fcoe/fcoe.c:2144: warning: Excess function parameter 'netdev' description in 'fcoe_dcb_create' drivers/scsi/fcoe/fcoe.c:2144: warning: Excess function parameter 'port' description in 'fcoe_dcb_create' drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'lport' not described in 'fcoe_elsct_send' drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'did' not described in 'fcoe_elsct_send' drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'fp' not described in 'fcoe_elsct_send' drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'op' not described in 'fcoe_elsct_send' drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'resp' not described in 'fcoe_elsct_send' drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'arg' not described in 'fcoe_elsct_send' drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'timeout' not described in 'fcoe_elsct_send' Link: https://lore.kernel.org/r/20200713074645.126138-5-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-22scsi: fcoe: remove unneeded semicolon in fcoe.cJason Yan1-2/+2
Fix the following coccicheck warning: drivers/scsi/fcoe/fcoe.c:1918:3-4: Unneeded semicolon drivers/scsi/fcoe/fcoe.c:1930:3-4: Unneeded semicolon Link: https://lore.kernel.org/r/20200421034008.27865-1-yanaijie@huawei.com Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-21Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-6/+11
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: qla2xxx, ufs, smartpqi, lpfc, hisi_sas, qedf, mpt3sas; plus a whole load of minor updates. The only core change this time around is the addition of request batching for virtio. Since batching requires an additional flag to use, it should be invisible to the rest of the drivers" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (264 commits) scsi: hisi_sas: Fix the conflict between device gone and host reset scsi: hisi_sas: Add BIST support for phy loopback scsi: hisi_sas: Add hisi_sas_debugfs_alloc() to centralise allocation scsi: hisi_sas: Remove some unused function arguments scsi: hisi_sas: Remove redundant work declaration scsi: hisi_sas: Remove hisi_sas_hw.slot_complete scsi: hisi_sas: Assign NCQ tag for all NCQ commands scsi: hisi_sas: Update all the registers after suspend and resume scsi: hisi_sas: Retry 3 times TMF IO for SAS disks when init device scsi: hisi_sas: Remove sleep after issue phy reset if sas_smp_phy_control() fails scsi: hisi_sas: Directly return when running I_T_nexus reset if phy disabled scsi: hisi_sas: Use true/false as input parameter of sas_phy_reset() scsi: hisi_sas: add debugfs auto-trigger for internal abort time out scsi: virtio_scsi: unplug LUNs when events missed scsi: scsi_dh_rdac: zero cdb in send_mode_select() scsi: fcoe: fix null-ptr-deref Read in fc_release_transport scsi: ufs-hisi: use devm_platform_ioremap_resource() to simplify code scsi: ufshcd: use devm_platform_ioremap_resource() to simplify code scsi: hisi_sas: use devm_platform_ioremap_resource() to simplify code scsi: ufs: Use kmemdup in ufshcd_read_string_desc() ...
2019-09-11scsi: fcoe: fix null-ptr-deref Read in fc_release_transportzhengbin1-5/+11
In fcoe_if_init, if fc_attach_transport(&fcoe_vport_fc_functions) fails, need to free the previously memory and return fail, otherwise will trigger null-ptr-deref Read in fc_release_transport. fcoe_exit fcoe_if_exit fc_release_transport(fcoe_vport_scsi_transport) Link: https://lore.kernel.org/r/1566279789-58207-1-git-send-email-zhengbin13@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-30scsi: fcoe: remove redundant call to skb_transport_headerColin Ian King1-1/+0
Pointer fh is being assigned a return value from the call to skb_transport_header however this value is never read and fh is being re-assigned immediately afterwards with a new value. Since there are side-effects from calling skb_transport_header the call is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-74/+66
Just minor overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31net: Use skb_frag_off accessorsJonathan Lemon2-3/+2
Use accessor functions for skb fragment's page_offset instead of direct references, in preparation for bvec conversion. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30scsi: fcoe: pass in fcoe_rport structure instead of fc_rport_privHannes Reinecke1-48/+51
Instead of using the generic 'fc_rport_priv' structure as argument and then having to painstakingly outcast this to fcoe_rport we should be passing the fcoe_rport structure itself and reduce complexity. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-30scsi: fcoe: Embed fc_rport_priv in fcoe_rport structureHannes Reinecke1-31/+20
Gcc-9 complains for a memset across pointer boundaries, which happens as the code tries to allocate a flexible array on the stack. Turns out we cannot do this without relying on gcc-isms, so with this patch we'll embed the fc_rport_priv structure into fcoe_rport, can use the normal 'container_of' outcast, and will only have to do a memset over one structure. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-24scsi: fcoe: fix a typoChristophe JAILLET1-1/+1
#define relative to FCOE CTLR start with FCOE_CTLR, except FCOE_CTRL_SOL_TOV. This is likely a typo and CTRL should be CTLR here as well. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-23net: Use skb accessors in network driversMatthew Wilcox (Oracle)1-1/+1
In preparation for unifying the skb_frag and bio_vec, use the fine accessors which already exist and use skb_frag_t instead of struct skb_frag_struct. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 335Thomas Gleixner5-65/+5
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 111 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.567572064@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20scsi: fcoe: make use of fip_mode enum completeSedat Dilek3-4/+7
commit 1917d42d14b7 ("fcoe: use enum for fip_mode") introduces a separate enum for the fip_mode that shall be used during initialisation handling until it is passed to fcoe_ctrl_link_up to set the initial fip_state. That change was incomplete and gcc quietly converted in various places between the fip_mode and the fip_state enum values with implicit enum conversions, which fortunately cannot cause any issues in the actual code's execution. clang however warns about these implicit enum conversions in the scsi drivers. This commit consolidates the use of the two enums, guided by clang's enum-conversion warnings. This commit now completes the use of the fip_mode: It expects and uses fip_mode in {bnx2fc,fcoe}_interface_create and fcoe_ctlr_init, and it calls fcoe_ctrl_set_set() with the correct values in fcoe_ctlr_link_up(). It also breaks the association between FIP_MODE_AUTO and FIP_ST_AUTO to indicate these two enums are distinct. Link: https://github.com/ClangBuiltLinux/linux/issues/151 Fixes: 1917d42d14b7 ("fcoe: use enum for fip_mode") Reported-by: Dmitry Golovin <dima@golovin.in> Original-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> CC: Lukas Bulwahn <lukas.bulwahn@gmail.com> CC: Nick Desaulniers <ndesaulniers@google.com> CC: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Suggested-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-29scsi: fcoe: remove unneeded fcoe_ctlr_destroy_store exportGreg Kroah-Hartman1-1/+0
There's no need to export fcoe_ctlr_destroy_store as a symbol, so remove the EXPORT_SYMBOL() line for it. Cc: Johannes Thumshirn <jth@kernel.org> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-29scsi: fcoe: convert to use BUS_ATTR_WOGreg Kroah-Hartman1-2/+13
We are trying to get rid of BUS_ATTR() and the usage of that in the fcoe driver can be trivially converted to use BUS_ATTR_WO(), so use that instead. Cc: Johannes Thumshirn <jth@kernel.org> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-21scsi: fcoe: remove set but not used variable 'port'YueHaibing1-4/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/fcoe/fcoe.c: In function 'fcoe_recv_frame': drivers/scsi/fcoe/fcoe.c:1672:20: warning: variable 'port' set but not used [-Wunused-but-set-variable] drivers/scsi/fcoe/fcoe.c: In function 'fcoe_device_notification': drivers/scsi/fcoe/fcoe.c:1861:20: warning: variable 'port' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Johannes Thumshirn <jth@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: flip the default on use_clusteringChristoph Hellwig1-1/+0
Most SCSI drivers want to enable "clustering", that is merging of segments so that they might span more than a single page. Remove the ENABLE_CLUSTERING define, and require drivers to explicitly set DISABLE_CLUSTERING to disable this feature. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-16Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-8/+4
Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx, hisi_sas, smartpqi, megaraid_sas, arcmsr. In addition, with the continuing absence of Nic we have target updates for tcmu and target core (all with reviews and acks). The biggest observable change is going to be that we're (again) trying to switch to mulitqueue as the default (a user can still override the setting on the kernel command line). Other major core stuff is the removal of the remaining Microchannel drivers, an update of the internal timers and some reworks of completion and result handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue scsi: ufs: remove unnecessary query(DM) UPIU trace scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done() scsi: aacraid: Spelling fix in comment scsi: mpt3sas: Fix calltrace observed while running IO & reset scsi: aic94xx: fix an error code in aic94xx_init() scsi: st: remove redundant pointer STbuffer scsi: qla2xxx: Update driver version to 10.00.00.08-k scsi: qla2xxx: Migrate NVME N2N handling into state machine scsi: qla2xxx: Save frame payload size from ICB scsi: qla2xxx: Fix stalled relogin scsi: qla2xxx: Fix race between switch cmd completion and timeout scsi: qla2xxx: Fix Management Server NPort handle reservation logic scsi: qla2xxx: Flush mailbox commands on chip reset scsi: qla2xxx: Fix unintended Logout scsi: qla2xxx: Fix session state stuck in Get Port DB scsi: qla2xxx: Fix redundant fc_rport registration scsi: qla2xxx: Silent erroneous message scsi: qla2xxx: Prevent sysfs access when chip is down scsi: qla2xxx: Add longer window for chip reset ...
2018-08-02scsi: fcoe: drop frames in ELS LOGO error pathJohannes Thumshirn1-2/+2
Drop the frames in the ELS LOGO error path instead of just returning an error. This fixes the following kmemleak report: unreferenced object 0xffff880064cb1000 (size 424): comm "kworker/0:2", pid 24, jiffies 4294904293 (age 68.504s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<(____ptrval____)>] _fc_frame_alloc+0x2c/0x180 [libfc] [<(____ptrval____)>] fc_lport_enter_logo+0x106/0x360 [libfc] [<(____ptrval____)>] fc_fabric_logoff+0x8c/0xc0 [libfc] [<(____ptrval____)>] fcoe_if_destroy+0x79/0x3b0 [fcoe] [<(____ptrval____)>] fcoe_destroy_work+0xd2/0x170 [fcoe] [<(____ptrval____)>] process_one_work+0x7ff/0x1420 [<(____ptrval____)>] worker_thread+0x87/0xef0 [<(____ptrval____)>] kthread+0x2db/0x390 [<(____ptrval____)>] ret_from_fork+0x35/0x40 [<(____ptrval____)>] 0xffffffffffffffff which can be triggered by issuing echo eth0 > /sys/bus/fcoe/ctlr_destroy Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: fcoe: fix use-after-free in fcoe_ctlr_els_sendJohannes Thumshirn1-1/+1
KASAN reports a use-after-free in fcoe_ctlr_els_send() when we're sending a LOGO and have FIP debugging enabled. This is because we're first freeing the skb and then printing the frame's DID. But the DID is a member of the FC frame header which in turn is the skb's payload. Exchange the debug print and kfree_skb() calls so we're not touching the freed data. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-13scsi: fcoe: hold disc_mutex when traversing rport listsHannes Reinecke1-8/+4
When calling either fc_rport_logon() or fc_rport_logoff() during rport list traversal we cannot use the RCU list traversal, as either of these functions will be taking a mutex. So we need to partially revert commit a407c593398c to take the disc mutex during traversal. We should, however, continue to use krefs to ensure that the rport object will not be freed from under us. Fixes: a407c593398c ("scsi: libfc: Fixup disc_mutex handling") Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-13treewide: kmalloc() -> kmalloc_array()Kees Cook1-2/+2
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-22treewide: setup_timer() -> timer_setup()Kees Cook1-4/+4
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-16Merge tag 'modules-for-v4.15' of ↵Linus Torvalds1-8/+12
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull module updates from Jessica Yu: "Summary of modules changes for the 4.15 merge window: - treewide module_param_call() cleanup, fix up set/get function prototype mismatches, from Kees Cook - minor code cleanups" * tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Do not paper over type mismatches in module_param_call() treewide: Fix function prototypes for module_param_call() module: Prepare to convert all module_param_call() prototypes kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-09 18:43:15 +0300