summaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx
AgeCommit message (Collapse)AuthorFilesLines
2015-04-10qla2xxx: Update driver version to 8.07.00.18-kHimanshu Madhani1-1/+1
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10qla2xxx: Restore physical port WWPN only, when port down detected for ↵Sawan Chandak1-4/+13
FA-WWPN port. For FA-WWPN is enabled port, if NPIV created on that port and, if port link is brought down, then WWPN was restored from flash for both physical and NPIV port. This will result in NPIV port and physical port sharing same WWPN. Any application refreshing ports information will not be able to scan NPIV port because of this behavior. So while restoring WWPN, only restore physical port WWPN. Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10qla2xxx: Fix virtual port configuration, when switch port is disabled/enabled.Sawan Chandak3-8/+17
On some vendor switches, when switch port is toggled (down /up), then in some condition driver tries to configure virtual port, before FW is actually in ready state to process any commands on wire. At this time, configuring virtual port can fail. Add fix in driver to make driver wait, for FW to be ready state before Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10qla2xxx: Prevent multiple firmware dump collection for ISP27XX.Himanshu Madhani2-1/+5
For ISP27XX, driver will capture new firmware dump even if there is one already collected. Prevent this from happening by checking fw_dumped flag. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10qla2xxx: Disable Interrupt handshake for ISP27XX.Himanshu Madhani1-1/+2
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10qla2xxx: Add debugging info for MBX timeout.Himanshu Madhani4-13/+77
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10qla2xxx: Add serdes read/write support for ISP27XXAndrew Vasquez1-4/+11
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10qla2xxx: Add udev notification to save fw dump for ISP27XXHimanshu Madhani1-2/+3
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10qla2xxx: Add message for sucessful FW dump collected for ISP27XX.Himanshu Madhani2-1/+9
o Added message indicating firmware dump was sucessfully collected for ISP27XX. o Improve logging to help debug firmware dump process for ISP27XX. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10qla2xxx: Add support to load firmware from file for ISP 26XX/27XX.Sawan Chandak2-0/+6
Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10qla2xxx: Fix beacon blink for ISP27XX.Nigel Kirkland1-4/+7
Signed-off-by: Nigel Kirkland <nigel.kirkland@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10qla2xxx: Increase the wait time for firmware to be ready for P3P.Chad Dupuis1-2/+5
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10qla2xxx: Fix crash due to wrong casting of reg for ISP27XX.Himanshu Madhani1-1/+1
[Bart: additional sparse warning caused by this patch] [jejb: fix sparse warning] Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10qla2xxx: Fix warnings reported by static checker.Himanshu Madhani1-5/+5
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-02-22Merge branch 'for-next' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - Update vhost-scsi to support F_ANY_LAYOUT using mm/iov_iter.c logic, and signal VERSION_1 support (MST + Viro + nab) - Fix iscsi/iser-target to remove problematic active_ts_set usage (Gavin Guo) - Update iscsi/iser-target to support multi-sequence sendtargets (Sagi) - Fix original PR_APTPL_BUF_LEN 8k size limitation (Martin Svec) - Add missing WRITE_SAME end-of-device sanity check (Bart) - Check for LBA + sectors wrap-around in sbc_parse_cdb() (nab) - Other various minor SPC/SBC compliance fixes based upon Ronnie Sahlberg test suite (nab)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (32 commits) target: Set LBPWS10 bit in Logical Block Provisioning EVPD target: Fail UNMAP when emulate_tpu=0 target: Fail WRITE_SAME w/ UNMAP=1 when emulate_tpws=0 target: Add sanity checks for DPO/FUA bit usage target: Perform PROTECT sanity checks for WRITE_SAME target: Fail I/O with PROTECT bit when protection is unsupported target: Check for LBA + sectors wrap-around in sbc_parse_cdb target: Add missing WRITE_SAME end-of-device sanity check iscsi-target: Avoid IN_LOGOUT failure case for iser-target target: Fix PR_APTPL_BUF_LEN buffer size limitation iscsi-target: Drop problematic active_ts_list usage iscsi/iser-target: Support multi-sequence sendtargets text response iser-target: Remove duplicate function names vhost/scsi: potential memory corruption vhost/scsi: Global tcm_vhost -> vhost_scsi rename vhost/scsi: Drop left-over scsi_tcq.h include vhost/scsi: Set VIRTIO_F_ANY_LAYOUT + VIRTIO_F_VERSION_1 feature bits vhost/scsi: Add ANY_LAYOUT support in vhost_scsi_handle_vq vhost/scsi: Add ANY_LAYOUT iov -> sgl mapping prerequisites vhost/scsi: Change vhost_scsi_map_to_sgl to accept iov ptr + len ...
2015-02-02scsi: print single-character strings with seq_putcRasmus Villemoes1-1/+1
Using seq_putc to print a single character saves at least a strlen() call and a memory access, and may also give a small .text reduction. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02scsi: replace seq_printf with seq_putsRasmus Villemoes1-4/+4
Using seq_printf to print a simple string is a lot more expensive than it needs to be, since seq_puts exists. Replace seq_printf with seq_puts when possible. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-16tcm_qla2xxx: print port name via %*phCAndy Shevchenko1-3/+1
Instead of pushing each byte via stack let's use custom specifier which allows to print small buffers as a hex string. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-01-05qla2xxx: fix busy wait regressionBruno Prémont1-1/+3
Commit e05fe29248 (qla2xxx: Honor FCP_RSP retry delay timer field.) causes systems to busy-wait for about 3 minutes after boot prior to detecting SAN disks. During this wait period one kworker is running full-time (though /proc/<pid>/stack has no useful data). Another kworker is waiting for IO to complete during that whole time period. Looking at drivers/scsi/qla2xxx/qla_os.c, fcport->retry_delay_timestamp has a special value of 0 though that 0 value forces system to wait when jiffies is very large value (e.g. 4294952605 - "negative" value when signed on 32bit systems). Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Acked-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-15qla2xxx: fix race in handling rport deletion during recovery causes panicLaurence Oberman1-2/+0
When we have an rport disconnect we race during rport deletion and re-connection resulting in a panic. When we do this, we call fc_remote_port_del() just before we do the calls to re-establish the session with the FC transport with fc_remote_port_add() and then fc_remote_port_rolechg(). If we remove the call to fc_remote_port_del() before re-establishing the connection this prevents the race. This patch has resolved this for multiple customers via test kernels. Suggested by Chad Dupuis, implemented and tested by Laurence Oberman. Signed-off-by: Laurence Oberman <loberman@redhat.com> Acked-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-04scsi: remove MSG_*_TAG definesChristoph Hellwig1-6/+6
For SPI drivers use the message definitions from scsi.h, and for target drivers introduce a new TCM_*_TAG namespace. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com
2014-12-04scsi: remove ->change_queue_type methodChristoph Hellwig1-1/+0
Since we got rid of ordered tag support in 2010 the prime use case of switching on and off ordered tags has been obsolete. The other function of enabling/disabling tagging entirely has only been correctly implemented by the 53c700 driver and isn't generally useful. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-24scsi: drop reason argument from ->change_queue_depthChristoph Hellwig1-10/+2
Drop the now unused reason argument from the ->change_queue_depth method. Also add a return value to scsi_adjust_queue_depth, and rename it to scsi_change_queue_depth now that it can be used as the default ->change_queue_depth implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-24scsi: avoid ->change_queue_depth indirection for queue full trackingChristoph Hellwig1-46/+2
All drivers use the implementation for ramping the queue up and down, so instead of overloading the change_queue_depth method call the implementation diretly if the driver opts into it by setting the track_queue_depth flag in the host template. Note that a few drivers validated the new queue depth in their change_queue_depth method, but as we never go over the queue depth set during slave_configure or the sysfs file this isn't nessecary and can safely be removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>
2014-11-12qla2xxx: remove redundant declaration in 'qla_gbl.h'Chen Gang2-3/+1
Remove 2 redundant extern inline functions: qla8044_set_qsnt_ready() and qla8044_need_reset_handler(). At present, within upstream next kernel source code, they are only used within "drivers/scsi/qla2xxx/qla_nx2.c". The related error and warnings (with allmodconfig under tile): CC [M] drivers/scsi/qla2xxx/qla_nx2.o drivers/scsi/qla2xxx/qla_nx2.c:1633:1: error: static declaration of 'qla8044_need_reset_handler' follows non-static declaration qla8044_need_reset_handler(struct scsi_qla_host *vha) ^ In file included from drivers/scsi/qla2xxx/qla_def.h:3706:0, from drivers/scsi/qla2xxx/qla_nx2.c:11: drivers/scsi/qla2xxx/qla_gbl.h:756:20: note: previous declaration of 'qla8044_need_reset_handler' was here extern inline void qla8044_need_reset_handler(struct scsi_qla_host *vha); ^ drivers/scsi/qla2xxx/qla_gbl.h:756:20: warning: inline function 'qla8044_need_reset_handler' declared but never defined make[3]: *** [drivers/scsi/qla2xxx/qla_nx2.o] Error 1 make[2]: *** [drivers/scsi/qla2xxx] Error 2 make[1]: *** [drivers/scsi] Error 2 make: *** [drivers] Error 2 CC [M] drivers/scsi/qla2xxx/qla_tmpl.o In file included from drivers/scsi/qla2xxx/qla_def.h:3706:0, from drivers/scsi/qla2xxx/qla_tmpl.c:7: drivers/scsi/qla2xxx/qla_gbl.h:755:20: warning: inline function 'qla8044_set_qsnt_ready' declared but never defined extern inline void qla8044_set_qsnt_ready(struct scsi_qla_host *vha); ^ Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Acked-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: don't set tagging state from scsi_adjust_queue_depthChristoph Hellwig1-3/+3
Remove the tagged argument from scsi_adjust_queue_depth, and just let it handle the queue depth. For most drivers those two are fairly separate, given that most modern drivers don't care about the SCSI "tagged" status of a command at all, and many old drivers allow queuing of multiple untagged commands in the driver. Instead we start out with the ->simple_tags flag set before calling ->slave_configure, which is how all drivers actually looking at ->simple_tags except for one worke anyway. The one other case looks broken, but I've kept the behavior as-is for now. Except for that we only change ->simple_tags from the ->change_queue_type, and when rejecting a tag message in a single driver, so keeping this churn out of scsi_adjust_queue_depth is a clear win. Now that the usage of scsi_adjust_queue_depth is more obvious we can also remove all the trivial instances in ->slave_alloc or ->slave_configure that just set it to the cmd_per_lun default. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2014-11-12scsi: always assign block layer tags if enabledChristoph Hellwig1-4/+2
Allow a driver to ask for block layer tags by setting .use_blk_tags in the host template, in which case it will always see a valid value in request->tag, similar to the behavior when using blk-mq. This means even SCSI "untagged" commands will now have a tag, which is especially useful when using a host-wide tag map. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12scsi: remove abuses of scsi_populate_tagChristoph Hellwig2-102/+3
Unless we want to build a SPI tag message we should just check SCMD_TAGGED instead of reverse engineering a tag type through the use of scsi_populate_tag_msg. Also rename the function to spi_populate_tag_msg, make it behave like the other spi message helpers, and move it to the spi transport class. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12scsi: remove ordered_tags scsi_device fieldChristoph Hellwig1-4/+1
Remove the ordered_tags field, we haven't been issuing ordered tags based on it since the big barrier rework in 2010. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2014-11-12scsi: provide a generic change_queue_type methodChristoph Hellwig1-17/+1
Most drivers use exactly the same implementation, so provide it as a library function. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-10-22Merge branch 'for-next' of ↵Linus Torvalds3-31/+27
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "Here are the target updates for v3.18-rc2 code. These where originally destined for -rc1, but due to the combination of travel last week for KVM Forum and my mistake of taking the three week merge window literally, the pull request slipped.. Apologies for that. Things where reasonably quiet this round. The highlights include: - New userspace backend driver (target_core_user.ko) by Shaohua Li and Andy Grover - A number of cleanups in target, iscsi-taret and qla_target code from Joern Engel - Fix an OOPs related to queue full handling with CHECK_CONDITION status from Quinn Tran - Fix to disable TX completion interrupt coalescing in iser-target, that was causing problems on some hardware - Fix for PR APTPL metadata handling with demo-mode ACLs I'm most excited about the new backend driver that uses UIO + shared memory ring to dispatch I/O and control commands into user-space. This was probably the most requested feature by users over the last couple of years, and opens up a new area of development + porting of existing user-space storage applications to LIO. Thanks to Shaohua + Andy for making this happen. Also another honorable mention, a new Xen PV SCSI driver was merged via the xen/tip.git tree recently, which puts us now at 10 target drivers in upstream! Thanks to David Vrabel + Juergen Gross for their work to get this code merged" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (40 commits) target/file: fix inclusive vfs_fsync_range() end iser-target: Disable TX completion interrupt coalescing target: Add force_pr_aptpl device attribute target: Fix APTPL metadata handling for dynamic MappedLUNs qla_target: don't delete changed nacls target/user: Recalculate pad size inside is_ring_space_avail() tcm_loop: Fixup tag handling iser-target: Fix smatch warning target/user: Fix up smatch warnings in tcmu_netlink_event target: Add a user-passthrough backstore target: Add documentation on the target userspace pass-through driver uio: Export definition of struct uio_device target: Remove unneeded check in sbc_parse_cdb target: Fix queue full status NULL pointer for SCF_TRANSPORT_TASK_SENSE qla_target: rearrange struct qla_tgt_prm qla_target: improve qlt_unmap_sg() qla_target: make some global functions static qla_target: remove unused parameter target: simplify core_tmr_abort_task target: encapsulate smp_mb__after_atomic() ...
2014-10-13Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main changes in this cycle were: - Optimized support for Intel "Cluster-on-Die" (CoD) topologies (Dave Hansen) - Various sched/idle refinements for better idle handling (Nicolas Pitre, Daniel Lezcano, Chuansheng Liu, Vincent Guittot) - sched/numa updates and optimizations (Rik van Riel) - sysbench speedup (Vincent Guittot) - capacity calculation cleanups/refactoring (Vincent Guittot) - Various cleanups to thread group iteration (Oleg Nesterov) - Double-rq-lock removal optimization and various refactorings (Kirill Tkhai) - various sched/deadline fixes ... and lots of other changes" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits) sched/dl: Use dl_bw_of() under rcu_read_lock_sched() sched/fair: Delete resched_cpu() from idle_balance() sched, time: Fix build error with 64 bit cputime_t on 32 bit systems sched: Improve sysbench performance by fixing spurious active migration sched/x86: Fix up typo in topology detection x86, sched: Add new topology for multi-NUMA-node CPUs sched/rt: Use resched_curr() in task_tick_rt() sched: Use rq->rd in sched_setaffinity() under RCU read lock sched: cleanup: Rename 'out_unlock' to 'out_free_new_mask' sched: Use dl_bw_of() under RCU read lock sched/fair: Remove duplicate code from can_migrate_task() sched, mips, ia64: Remove __ARCH_WANT_UNLOCKED_CTXSW sched: print_rq(): Don't use tasklist_lock sched: normalize_rt_tasks(): Don't use _irqsave for tasklist_lock, use task_rq_lock() sched: Fix the task-group check in tg_has_rt_tasks() sched/fair: Leverage the idle state info when choosing the "idlest" cpu sched: Let the scheduler see CPU idle states sched/deadline: Fix inter- exclusive cpusets migrations sched/deadline: Clear dl_entity params when setscheduling to different class sched/numa: Kill the wrong/dead TASK_DEAD check in task_numa_fault() ...
2014-10-08Merge tag 'scsi-for-linus' of ↵Linus Torvalds23-552/+1943
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This patch set consists of the usual driver updates (megaraid_sas, arcmsr, be2iscsi, lpfc, mpt2sas, mpt3sas, qla2xxx, ufs) plus several assorted fixes and miscellaneous updates (including the pci_msix_enable_range() changes that have been pending for a while)" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (202 commits) scsi: add a CONFIG_SCSI_MQ_DEFAULT option ufs: definitions for phy interface ufs: tune bkops while power managment events ufs: Add support for clock scaling using devfreq framework ufs: Add freq-table-hz property for UFS device ufs: Add support for clock gating ufs: refactor configuring power mode ufs: add UFS power management support ufs: introduce well known logical unit in ufs ufs: manually add well known logical units ufs: Active Power Mode - configuring bActiveICCLevel ufs: improve init sequence ufs: refactor query descriptor API support ufs: add voting support for host controller power ufs: Add clock initialization support ufs: Add regulator enable support ufs: Allow vendor specific initialization scsi: don't add scsi_device if its already visible scsi: fix the type for well known LUs scsi: fix comment in struct Scsi_Host definition ...
2014-10-08Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull "trivial tree" updates from Jiri Kosina: "Usual pile from trivial tree everyone is so eagerly waiting for" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Remove MN10300_PROC_MN2WS0038 mei: fix comments treewide: Fix typos in Kconfig kprobes: update jprobe_example.c for do_fork() change Documentation: change "&" to "and" in Documentation/applying-patches.txt Documentation: remove obsolete pcmcia-cs from Changes Documentation: update links in Changes Documentation: Docbook: Fix generated DocBook/kernel-api.xml score: Remove GENERIC_HAS_IOMAP gpio: fix 'CONFIG_GPIO_IRQCHIP' comments tty: doc: Fix grammar in serial/tty dma-debug: modify check_for_stack output treewide: fix errors in printk genirq: fix reference in devm_request_threaded_irq comment treewide: fix synchronize_rcu() in comments checkstack.pl: port to AArch64 doc: queue-sysfs: minor fixes init/do_mounts: better syntax description MIPS: fix comment spelling powerpc/simpleboot: fix comment ...
2014-10-04qla_target: don't delete changed naclsJoern Engel1-1/+10
The code is currently riddled with "drop the hardware_lock to avoid a deadlock" bugs that expose races. One of those races seems to expose a valid warning in tcm_qla2xxx_clear_nacl_from_fcport_map. Add some bandaid to it. Signed-off-by: Joern Engel <joern@logfs.org> Cc: <stable@vger.kernel.org> # v3.5+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-10-02qla_target: rearrange struct qla_tgt_prmJoern Engel1-1/+1
On most (non-x86) 64bit platforms this will remove 8 padding bytes from the structure. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-10-02qla_target: improve qlt_unmap_sg()Joern Engel1-11/+8
Remove the inline attribute. Modern compilers ignore it and the function has grown beyond where inline made sense anyway. Remove the BUG_ON(!cmd->sg_mapped), and instead return if sg_mapped is not set. Every caller is doing this check, so we might as well have it in one place instead of four. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-10-02qla_target: make some global functions staticJoern Engel2-15/+5
Also removes the declarations from the header - including two declarations without function definitions or callers. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-10-02qla_target: remove unused parameterJoern Engel1-3/+3
Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-09-25qla2xxx: Add memory barrier before ringing doorbell.Himanshu Madhani1-0/+16
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Add flags for tracing the target commands.Saurav Kashyap3-4/+74
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Fix hang due to cmd_kref not decrementingQuinn Tran2-12/+7
Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Do not send SS_RESIDUAL_UNDER with SAM_STAT_BUSYHimanshu Madhani1-6/+0
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Add support for QFull throttling and Term Exchange retryQuinn Tran5-8/+316
Through the qla target code, the qlt_send_term_exchange() routine is used in various different places to cleanup an exchange. For the case of IOCB request queue is full, the exchange is left unhandled/ dangling. Existing code does not have re-try logic to cleanup the exchange. This patch add retry logic to cleanup the exchange before letting new commands through. For the case of FW running out of exchanges, driver need to reply SAM_STAT_BUSY to the initiators. This patch add a pending queue for the busy reply in case IOCB queue is unable to handle the cmd. Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Increase the request queue size to 8K for ISP2031Saurav Kashyap2-1/+2
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Host reset handling in ABTS path.Arun Easi1-0/+2
ABTS path takes path similar to regular task management, but reset_count was not initialized when allocating mcmd causing the response to get dropped in qlt_xmit_tm_rsp. Fix this by initializing reset_count correctly. Signed-off-by: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Handle chip reset in target mode.Arun Easi6-3/+72
A chip reset can occur after driver submits command to the stack. Abort command processing if a chip reset has occurred or in progress when you get a follow up for a command. Signed-off-by: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Add Host reset handling in target mode.Arun Easi4-1/+78
Signed-off-by: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: fix crash due to task mgmt cmd typeHimanshu Madhani1-2/+7
tcm_qla2xxx_get_task_tag incorrectly assume command is qla_tgt_cmd. Add check to see if it's a scsi cmd or task mgmt command. Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Add counter for messageSaurav Kashyap1-5/+5
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-23 13:43:10 +0300