summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2013-11-22Merge branch 'for-next' of ↵Linus Torvalds2-30/+28
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "Things have been quiet this round with mostly bugfixes, percpu conversions, and other minor iscsi-target conformance testing changes. The highlights include: - Add demo_mode_discovery attribute for iscsi-target (Thomas) - Convert tcm_fc(FCoE) to use percpu-ida pre-allocation - Add send completion interrupt coalescing for ib_isert - Convert target-core to use percpu-refcounting for se_lun - Fix mutex_trylock usage bug in iscsit_increment_maxcmdsn - tcm_loop updates (Hannes) - target-core ALUA cleanups + prep for v3.14 SCSI Referrals support (Hannes) v3.14 is currently shaping to be a busy development cycle in target land, with initial support for T10 Referrals and T10 DIF currently on the roadmap" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (40 commits) iscsi-target: chap auth shouldn't match username with trailing garbage iscsi-target: fix extract_param to handle buffer length corner case iscsi-target: Expose default_erl as TPG attribute target_core_configfs: split up ALUA supported states target_core_alua: Make supported states configurable target_core_alua: Store supported ALUA states target_core_alua: Rename ALUA_ACCESS_STATE_OPTIMIZED target_core_alua: spellcheck target core: rename (ex,im)plict -> (ex,im)plicit percpu-refcount: Add percpu-refcount.o to obj-y iscsi-target: Do not reject non-immediate CmdSNs exceeding MaxCmdSN iscsi-target: Convert iscsi_session statistics to atomic_long_t target: Convert se_device statistics to atomic_long_t target: Fix delayed Task Aborted Status (TAS) handling bug iscsi-target: Reject unsupported multi PDU text command sequence ib_isert: Avoid duplicate iscsit_increment_maxcmdsn call iscsi-target: Fix mutex_trylock usage in iscsit_increment_maxcmdsn target: Core does not need blkdev.h target: Pass through I/O topology for block backstores iser-target: Avoid using FRMR for single dma entry requests ...
2013-11-20aacraid: prevent invalid pointer dereferenceMahesh Rajashekhara1-1/+2
It appears that driver runs into a problem here if fibsize is too small because we allocate user_srbcmd with fibsize size only but later we access it until user_srbcmd->sg.count to copy it over to srbcmd. It is not correct to test (fibsize < sizeof(*user_srbcmd)) because this structure already includes one sg element and this is not needed for commands without data. So, we would recommend to add the following (instead of test for fibsize == 0). Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com> Reported-by: Nico Golde <nico@ngolde.de> Reported-by: Fabian Yamaguchi <fabs@goesec.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-1/+2
Pull networking fixes from David Miller: "Mostly these are fixes for fallout due to merge window changes, as well as cures for problems that have been with us for a much longer period of time" 1) Johannes Berg noticed two major deficiencies in our genetlink registration. Some genetlink protocols we passing in constant counts for their ops array rather than something like ARRAY_SIZE(ops) or similar. Also, some genetlink protocols were using fixed IDs for their multicast groups. We have to retain these fixed IDs to keep existing userland tools working, but reserve them so that other multicast groups used by other protocols can not possibly conflict. In dealing with these two problems, we actually now use less state management for genetlink operations and multicast groups. 2) When configuring interface hardware timestamping, fix several drivers that simply do not validate that the hwtstamp_config value is one the driver actually supports. From Ben Hutchings. 3) Invalid memory references in mwifiex driver, from Amitkumar Karwar. 4) In dev_forward_skb(), set the skb->protocol in the right order relative to skb_scrub_packet(). From Alexei Starovoitov. 5) Bridge erroneously fails to use the proper wrapper functions to make calls to netdev_ops->ndo_vlan_rx_{add,kill}_vid. Fix from Toshiaki Makita. 6) When detaching a bridge port, make sure to flush all VLAN IDs to prevent them from leaking, also from Toshiaki Makita. 7) Put in a compromise for TCP Small Queues so that deep queued devices that delay TX reclaim non-trivially don't have such a performance decrease. One particularly problematic area is 802.11 AMPDU in wireless. From Eric Dumazet. 8) Fix crashes in tcp_fastopen_cache_get(), we can see NULL socket dsts here. Fix from Eric Dumzaet, reported by Dave Jones. 9) Fix use after free in ipv6 SIT driver, from Willem de Bruijn. 10) When computing mergeable buffer sizes, virtio-net fails to take the virtio-net header into account. From Michael Dalton. 11) Fix seqlock deadlock in ip4_datagram_connect() wrt. statistic bumping, this one has been with us for a while. From Eric Dumazet. 12) Fix NULL deref in the new TIPC fragmentation handling, from Erik Hugne. 13) 6lowpan bit used for traffic classification was wrong, from Jukka Rissanen. 14) macvlan has the same issue as normal vlans did wrt. propagating LRO disabling down to the real device, fix it the same way. From Michal Kubecek. 15) CPSW driver needs to soft reset all slaves during suspend, from Daniel Mack. 16) Fix small frame pacing in FQ packet scheduler, from Eric Dumazet. 17) The xen-netfront RX buffer refill timer isn't properly scheduled on partial RX allocation success, from Ma JieYue. 18) When ipv6 ping protocol support was added, the AF_INET6 protocol initialization cleanup path on failure was borked a little. Fix from Vlad Yasevich. 19) If a socket disconnects during a read/recvmsg/recvfrom/etc that blocks we can do the wrong thing with the msg_name we write back to userspace. From Hannes Frederic Sowa. There is another fix in the works from Hannes which will prevent future problems of this nature. 20) Fix route leak in VTI tunnel transmit, from Fan Du. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits) genetlink: make multicast groups const, prevent abuse genetlink: pass family to functions using groups genetlink: add and use genl_set_err() genetlink: remove family pointer from genl_multicast_group genetlink: remove genl_unregister_mc_group() hsr: don't call genl_unregister_mc_group() quota/genetlink: use proper genetlink multicast APIs drop_monitor/genetlink: use proper genetlink multicast APIs genetlink: only pass array to genl_register_family_with_ops() tcp: don't update snd_nxt, when a socket is switched from repair mode atm: idt77252: fix dev refcnt leak xfrm: Release dst if this dst is improper for vti tunnel netlink: fix documentation typo in netlink_set_err() be2net: Delete secondary unicast MAC addresses during be_close be2net: Fix unconditional enabling of Rx interface options net, virtio_net: replace the magic value ping: prevent NULL pointer dereference on write to msg_name bnx2x: Prevent "timeout waiting for state X" bnx2x: prevent CFC attention bnx2x: Prevent panic during DMAE timeout ...
2013-11-20genetlink: pass family to functions using groupsJohannes Berg1-1/+2
This doesn't really change anything, but prepares for the next patch that will change the APIs to pass the group ID within the family, rather than the global group ID. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19Merge tag 'rdma-for-linus' of ↵Linus Torvalds1-1/+539
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband/rdma updates from Roland Dreier: - Re-enable flow steering verbs with new improved userspace ABI - Fixes for slow connection due to GID lookup scalability - IPoIB fixes - Many fixes to HW drivers including mlx4, mlx5, ocrdma and qib - Further improvements to SRP error handling - Add new transport type for Cisco usNIC * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (66 commits) IB/core: Re-enable create_flow/destroy_flow uverbs IB/core: extended command: an improved infrastructure for uverbs commands IB/core: Remove ib_uverbs_flow_spec structure from userspace IB/core: Use a common header for uverbs flow_specs IB/core: Make uverbs flow structure use names like verbs ones IB/core: Rename 'flow' structs to match other uverbs structs IB/core: clarify overflow/underflow checks on ib_create/destroy_flow IB/ucma: Convert use of typedef ctl_table to struct ctl_table IB/cm: Convert to using idr_alloc_cyclic() IB/mlx5: Fix page shift in create CQ for userspace IB/mlx4: Fix device max capabilities check IB/mlx5: Fix list_del of empty list IB/mlx5: Remove dead code IB/core: Encorce MR access rights rules on kernel consumers IB/mlx4: Fix endless loop in resize CQ RDMA/cma: Remove unused argument and minor dead code RDMA/ucma: Discard events for IDs not yet claimed by user space IB/core: Add Cisco usNIC rdma node and transport types RDMA/nes: Remove self-assignment from nes_query_qp() IB/srp: Report receive errors correctly ...
2013-11-16Merge branch 'for-linus' of ↵Linus Torvalds26-56/+18
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual earth-shaking, news-breaking, rocket science pile from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) doc: usb: Fix typo in Documentation/usb/gadget_configs.txt doc: add missing files to timers/00-INDEX timekeeping: Fix some trivial typos in comments mm: Fix some trivial typos in comments irq: Fix some trivial typos in comments NUMA: fix typos in Kconfig help text mm: update 00-INDEX doc: Documentation/DMA-attributes.txt fix typo DRM: comment: `halve' -> `half' Docs: Kconfig: `devlopers' -> `developers' doc: typo on word accounting in kprobes.c in mutliple architectures treewide: fix "usefull" typo treewide: fix "distingush" typo mm/Kconfig: Grammar s/an/a/ kexec: Typo s/the/then/ Documentation/kvm: Update cpuid documentation for steal time and pv eoi treewide: Fix common typo in "identify" __page_to_pfn: Fix typo in comment Correct some typos for word frequency clk: fixed-factor: Fix a trivial typo ...
2013-11-15Merge tag 'virtio-next-for-linus' of ↵Linus Torvalds1-10/+9
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio updates from Rusty Russell: "Nothing really exciting: some groundwork for changing virtio endian, and some robustness fixes for broken virtio devices, plus minor tweaks" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio_scsi: verify if queue is broken after virtqueue_get_buf() x86, asmlinkage, lguest: Pass in globals into assembler statement virtio: mmio: fix signature checking for BE guests virtio_ring: adapt to notify() returning bool virtio_net: verify if queue is broken after virtqueue_get_buf() virtio_console: verify if queue is broken after virtqueue_get_buf() virtio_blk: verify if queue is broken after virtqueue_get_buf() virtio_ring: add new function virtqueue_is_broken() virtio_test: verify if virtqueue_kick() succeeded virtio_net: verify if virtqueue_kick() succeeded virtio_ring: let virtqueue_{kick()/notify()} return a bool virtio_ring: change host notification API virtio_config: remove virtio_config_val virtio: use size-based config accessors. virtio_config: introduce size-based accessors. virtio_ring: plug kmemleak false positive. virtio: pm: use CONFIG_PM_SLEEP instead of CONFIG_PM
2013-11-14Merge tag 'pci-v3.13-changes' of ↵Linus Torvalds4-72/+23
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Resource management - Fix host bridge window coalescing (Alexey Neyman) - Pass type, width, and prefetchability for window alignment (Wei Yang) PCI device hotplug - Convert acpiphp, acpiphp_ibm to dynamic debug (Lan Tianyu) Power management - Remove pci_pm_complete() (Liu Chuansheng) MSI - Fail initialization if device is not in PCI_D0 (Yijing Wang) MPS (Max Payload Size) - Use pcie_get_mps() and pcie_set_mps() to simplify code (Yijing Wang) - Use pcie_set_readrq() to simplify code (Yijing Wang) - Use cached pci_dev->pcie_mpss to simplify code (Yijing Wang) SR-IOV - Enable upstream bridges even for VFs on virtual buses (Bjorn Helgaas) - Use pci_is_root_bus() to avoid catching virtual buses (Wei Yang) Virtualization - Add x86 MSI masking ops (Konrad Rzeszutek Wilk) Freescale i.MX6 - Support i.MX6 PCIe controller (Sean Cross) - Increase link startup timeout (Marek Vasut) - Probe PCIe in fs_initcall() (Marek Vasut) - Fix imprecise abort handler (Tim Harvey) - Remove redundant of_match_ptr (Sachin Kamat) Renesas R-Car - Support Gen2 internal PCIe controller (Valentine Barshak) Samsung Exynos - Add MSI support (Jingoo Han) - Turn off power when link fails (Jingoo Han) - Add Jingoo Han as maintainer (Jingoo Han) - Add clk_disable_unprepare() on error path (Wei Yongjun) - Remove redundant of_match_ptr (Sachin Kamat) Synopsys DesignWare - Add irq_create_mapping() (Pratyush Anand) - Add header guards (Seungwon Jeon) Miscellaneous - Enable native PCIe services by default on non-ACPI (Andrew Murray) - Cleanup _OSC usage and messages (Bjorn Helgaas) - Remove pcibios_last_bus boot option on non-x86 (Bjorn Helgaas) - Convert bus code to use bus_, drv_, and dev_groups (Greg Kroah-Hartman) - Remove unused pci_mem_start (Myron Stowe) - Make sysfs functions static (Sachin Kamat) - Warn on invalid return from driver probe (Stephen M. Cameron) - Remove Intel Haswell D3 delays (Todd E Brandt) - Call pci_set_master() in core if driver doesn't do it (Yinghai Lu) - Use pci_is_pcie() to simplify code (Yijing Wang) - Use PCIe capability accessors to simplify code (Yijing Wang) - Use cached pci_dev->pcie_cap to simplify code (Yijing Wang) - Removed unused "is_pcie" from struct pci_dev (Yijing Wang) - Simplify sysfs CPU affinity implementation (Yijing Wang)" * tag 'pci-v3.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (79 commits) PCI: Enable upstream bridges even for VFs on virtual buses PCI: Add pci_upstream_bridge() PCI: Add x86_msi.msi_mask_irq() and msix_mask_irq() PCI: Warn on driver probe return value greater than zero PCI: Drop warning about drivers that don't use pci_set_master() PCI: Workaround missing pci_set_master in pci drivers powerpc/pci: Use pci_is_pcie() to simplify code [fix] PCI: Update pcie_ports 'auto' behavior for non-ACPI platforms PCI: imx6: Probe the PCIe in fs_initcall() PCI: Add R-Car Gen2 internal PCI support PCI: imx6: Remove redundant of_match_ptr PCI: Report pci_pme_active() kmalloc failure mn10300/PCI: Remove useless pcibios_last_bus frv/PCI: Remove pcibios_last_bus PCI: imx6: Increase link startup timeout PCI: exynos: Remove redundant of_match_ptr PCI: imx6: Fix imprecise abort handler PCI: Fail MSI/MSI-X initialization if device is not in PCI_D0 PCI: imx6: Remove redundant dev_err() in imx6_pcie_probe() x86/PCI: Coalesce multiple overlapping host bridge windows ...
2013-11-14Merge tag 'scsi-for-linus' of ↵Linus Torvalds85-1416/+5552
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull first round of SCSI updates from James Bottomley: "This patch set is driver updates for qla4xxx, scsi_debug, pm80xx, fcoe/libfc, eas2r, lpfc, be2iscsi and megaraid_sas plus some assorted bug fixes and cleanups" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (106 commits) [SCSI] scsi_error: Escalate to LUN reset if abort fails [SCSI] Add 'eh_deadline' to limit SCSI EH runtime [SCSI] remove check for 'resetting' [SCSI] dc395: Move 'last_reset' into internal host structure [SCSI] tmscsim: Move 'last_reset' into host structure [SCSI] advansys: Remove 'last_reset' references [SCSI] dpt_i2o: return SCSI_MLQUEUE_HOST_BUSY when in reset [SCSI] dpt_i2o: Remove DPTI_STATE_IOCTL [SCSI] megaraid_sas: Fix synchronization problem between sysPD IO path and AEN path [SCSI] lpfc: Fix typo on NULL assignment [SCSI] scsi_dh_alua: ALUA handler attach should succeed while TPG is transitioning [SCSI] scsi_dh_alua: ALUA check sense should retry device internal reset unit attention [SCSI] esas2r: Cleanup snprinf formatting of firmware version [SCSI] esas2r: Remove superfluous mask of pcie_cap_reg [SCSI] esas2r: Fixes for big-endian platforms [SCSI] esas2r: Directly call kernel functions for atomic bit operations [SCSI] lpfc 8.3.43: Update lpfc version to driver version 8.3.43 [SCSI] lpfc 8.3.43: Fixed not processing task management IOCB response status [SCSI] lpfc 8.3.43: Fixed spinlock hang. [SCSI] lpfc 8.3.43: Fixed invalid Total_Data_Placed value received for els and ct command responses ...
2013-11-14Merge branch 'for-3.13/core' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull block IO core updates from Jens Axboe: "This is the pull request for the core changes in the block layer for 3.13. It contains: - The new blk-mq request interface. This is a new and more scalable queueing model that marries the best part of the request based interface we currently have (which is fully featured, but scales poorly) and the bio based "interface" which the new drivers for high IOPS devices end up using because it's much faster than the request based one. The bio interface has no block layer support, since it taps into the stack much earlier. This means that drivers end up having to implement a lot of functionality on their own, like tagging, timeout handling, requeue, etc. The blk-mq interface provides all these. Some drivers even provide a switch to select bio or rq and has code to handle both, since things like merging only works in the rq model and hence is faster for some workloads. This is a huge mess. Conversion of these drivers nets us a substantial code reduction. Initial results on converting SCSI to this model even shows an 8x improvement on single queue devices. So while the model was intended to work on the newer multiqueue devices, it has substantial improvements for "classic" hardware as well. This code has gone through extensive testing and development, it's now ready to go. A pull request is coming to convert virtio-blk to this model will be will be coming as well, with more drivers scheduled for 3.14 conversion. - Two blktrace fixes from Jan and Chen Gang. - A plug merge fix from Alireza Haghdoost. - Conversion of __get_cpu_var() from Christoph Lameter. - Fix for sector_div() with 64-bit divider from Geert Uytterhoeven. - A fix for a race between request completion and the timeout handling from Jeff Moyer. This is what caused the merge conflict with blk-mq/core, in case you are looking at that. - A dm stacking fix from Mike Snitzer. - A code consolidation fix and duplicated code removal from Kent Overstreet. - A handful of block bug fixes from Mikulas Patocka, fixing a loop crash and memory corruption on blk cg. - Elevator switch bug fix from Tomoki Sekiyama. A heads-up that I had to rebase this branch. Initially the immutable bio_vecs had been queued up for inclusion, but a week later, it became clear that it wasn't fully cooked yet. So the decision was made to pull this out and postpone it until 3.14. It was a straight forward rebase, just pruning out the immutable series and the later fixes of problems with it. The rest of the patches applied directly and no further changes were made" * 'for-3.13/core' of git://git.kernel.dk/linux-block: (31 commits) block: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO block: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO block: Do not call sector_div() with a 64-bit divisor kernel: trace: blktrace: remove redundent memcpy() in compat_blk_trace_setup() block: Consolidate duplicated bio_trim() implementations block: Use rw_copy_check_uvector() block: Enable sysfs nomerge control for I/O requests in the plug list block: properly stack underlying max_segment_size to DM device elevator: acquire q->sysfs_lock in elevator_change() elevator: Fix a race in elevator switching and md device initialization block: Replace __get_cpu_var uses bdi: test bdi_init failure block: fix a probe argument to blk_register_region loop: fix crash if blk_alloc_queue fails blk-core: Fix memory corruption if blkcg_init_queue fails block: fix race between request completion and timeout handling blktrace: Send BLK_TN_PROCESS events to all running traces blk-mq: don't disallow request merges for req->special being set blk-mq: mq plug list breakage blk-mq: fix for flush deadlock ...
2013-11-14Merge branch 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds1-1/+1
Pull DMA mask updates from Russell King: "This series cleans up the handling of DMA masks in a lot of drivers, fixing some bugs as we go. Some of the more serious errors include: - drivers which only set their coherent DMA mask if the attempt to set the streaming mask fails. - drivers which test for a NULL dma mask pointer, and then set the dma mask pointer to a location in their module .data section - which will cause problems if the module is reloaded. To counter these, I have introduced two helper functions: - dma_set_mask_and_coherent() takes care of setting both the streaming and coherent masks at the same time, with the correct error handling as specified by the API. - dma_coerce_mask_and_coherent() which resolves the problem of drivers forcefully setting DMA masks. This is more a marker for future work to further clean these locations up - the code which creates the devices really should be initialising these, but to fix that in one go along with this change could potentially be very disruptive. The last thing this series does is prise away some of Linux's addition to "DMA addresses are physical addresses and RAM always starts at zero". We have ARM LPAE systems where all system memory is above 4GB physical, hence having DMA masks interpreted by (eg) the block layers as describing physical addresses in the range 0..DMAMASK fails on these platforms. Santosh Shilimkar addresses this in this series; the patches were copied to the appropriate people multiple times but were ignored. Fixing this also gets rid of some ARM weirdness in the setup of the max*pfn variables, and brings ARM into line with every other Linux architecture as far as those go" * 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-arm: (52 commits) ARM: 7805/1: mm: change max*pfn to include the physical offset of memory ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculations ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculations ARM: 7795/1: mm: dma-mapping: Add dma_max_pfn(dev) helper function ARM: 7794/1: block: Rename parameter dma_mask to max_addr for blk_queue_bounce_limit() ARM: DMA-API: better handing of DMA masks for coherent allocations ARM: 7857/1: dma: imx-sdma: setup dma mask DMA-API: firmware/google/gsmi.c: avoid direct access to DMA masks DMA-API: dcdbas: update DMA mask handing DMA-API: dma: edma.c: no need to explicitly initialize DMA masks DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks DMA-API: crypto: remove last references to 'static struct device *dev' DMA-API: crypto: fix ixp4xx crypto platform device support DMA-API: others: use dma_set_coherent_mask() DMA-API: staging: use dma_set_coherent_mask() DMA-API: usb: use new dma_coerce_mask_and_coherent() DMA-API: usb: use dma_set_coherent_mask() DMA-API: parport: parport_pc.c: use dma_coerce_mask_and_coherent() DMA-API: net: octeon: use dma_coerce_mask_and_coherent() DMA-API: net: nxp/lpc_eth: use dma_coerce_mask_and_coherent() ...
2013-11-11virtio_scsi: verify if queue is broken after virtqueue_get_buf()Heinz Graalfs1-0/+3
If virtqueue_get_buf() returned with a NULL pointer avoid a possibly endless loop by checking for a broken virtqueue. Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-11-10Merge tag 'fcoe-3.13' into for-linusJames Bottomley9-174/+294
Pull Request for 3.13 for FCOE tree. Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-11-09scsi_transport_srp: Add periodic reconnect supportBart Van Assche1-7/+99
Add support for periodically reconnecting to an SRP target until the dev_loss timer expires. After the tenth reconnection attempt, gradually slow down subsequent reconnect attempts. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-09scsi_transport_srp: Add transport layer error handlingBart Van Assche1-1/+429
Add the necessary functions in the SRP transport module to allow an SRP initiator driver to implement transport layer error handling similar to the functionality already provided by the FC transport layer. This includes: - Support for implementing fast_io_fail_tmo, the time that should elapse after having detected a transport layer problem and before failing I/O. - Support for implementing dev_loss_tmo, the time that should elapse after having detected a transport layer problem and before removing a remote port. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-09IB/srp: Keep rport as long as the IB transport layerBart Van Assche1-0/+18
Keep the rport data structure around after srp_remove_host() has finished until cleanup of the IB transport layer has finished completely. This is necessary because later patches use the rport pointer inside the queuecommand callback. Without this patch accessing the rport from inside a queuecommand callback is racy because srp_remove_host() must be invoked before scsi_remove_host() and because the queuecommand callback could get invoked after srp_remove_host() has finished. In other words, without this patch the queuecommand callback can get invoked after the rport data structure has been freed. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-08Merge branch 'blk-mq/core' into for-3.13/coreJens Axboe1-1/+1
Signed-off-by: Jens Axboe <axboe@kernel.dk> Conflicts: block/blk-timeout.c
2013-11-07Merge tag 'driver-core-3.13-rc1' of ↵Linus Torvalds1-5/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core / sysfs patches from Greg KH: "Here's the big driver core / sysfs update for 3.13-rc1. There's lots of dev_groups updates for different subsystems, as they all get slowly migrated over to the safe versions of the attribute groups (removing userspace races with the creation of the sysfs files.) Also in here are some kobject updates, devres expansions, and the first round of Tejun's sysfs reworking to enable it to be used by other subsystems as a backend for an in-kernel filesystem. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (83 commits) sysfs: rename sysfs_assoc_lock and explain what it's about sysfs: use generic_file_llseek() for sysfs_file_operations sysfs: return correct error code on unimplemented mmap() mdio_bus: convert bus code to use dev_groups device: Make dev_WARN/dev_WARN_ONCE print device as well as driver name sysfs: separate out dup filename warning into a separate function sysfs: move sysfs_hash_and_remove() to fs/sysfs/dir.c sysfs: remove unused sysfs_get_dentry() prototype sysfs: honor bin_attr.attr.ignore_lockdep sysfs: merge sysfs_elem_bin_attr into sysfs_elem_attr devres: restore zeroing behavior of devres_alloc() sysfs: fix sysfs_write_file for bin file input: gameport: convert bus code to use dev_groups input: serio: remove bus usage of dev_attrs input: serio: use DEVICE_ATTR_RO() i2o: convert bus code to use dev_groups memstick: convert bus code to use dev_groups tifm: convert bus code to use dev_groups virtio: convert bus code to use dev_groups ipack: convert bus code to use dev_groups ...
2013-10-31ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculationsSantosh Shilimkar1-1/+1
DMA bounce limit is the maximum direct DMA'able memory beyond which bounce buffers has to be used to perform dma operations. SCSI driver relies on dma_mask but its calculation is based on max_*pfn which don't have uniform meaning across architectures. So make use of dma_max_pfn() which is expected to return the DMAable maximum pfn value across architectures. Cc: linux-scsi@vger.kernel.org Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-30aacraid: missing capable() check in compat ioctlDan Carpenter1-0/+2
In commit d496f94d22d1 ('[SCSI] aacraid: fix security weakness') we added a check on CAP_SYS_RAWIO to the ioctl. The compat ioctls need the check as well. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-25[SCSI] scsi_error: Escalate to LUN reset if abort failsHannes Reinecke1-7/+9
If a command abort fails there is a fair chance that all other aborts will be failing, too. So we should be calling LUN reset directly after the first failed abort and skip aborting the remaining commands. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] Add 'eh_deadline' to limit SCSI EH runtimeHannes Reinecke3-6/+168
This patchs adds an 'eh_deadline' sysfs attribute to the scsi host which limits the overall runtime of the SCSI EH. The 'eh_deadline' value is stored in the now obsolete field 'resetting'. When a command is failed the start time of the EH is stored in 'last_reset'. If the overall runtime of the SCSI EH is longer than last_reset + eh_deadline, the EH is short-circuited and falls through to issue a host reset only. [jejb: add comments in Scsi_Host about new fields] Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] remove check for 'resetting'Hannes Reinecke1-28/+0
Field is now unused, so this is dead code. [jejb: remove resetting and last_reset from Scsi_Host] Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25block: make rq->cmd_flags be 64-bitJens Axboe1-1/+1
We have officially run out of flags in a 32-bit space. Extend it to 64-bit even on 32-bit archs. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-25[SCSI] dc395: Move 'last_reset' into internal host structureHannes Reinecke1-11/+13
'last_reset' is only used internally, so move it into the internal host structure. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] tmscsim: Move 'last_reset' into host structureHannes Reinecke2-7/+8
The 'last_reset' value is only used internally, so move it into the internal host structure. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] advansys: Remove 'last_reset' referencesHannes Reinecke1-4/+4
Serves no purpose whatsoever. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] dpt_i2o: return SCSI_MLQUEUE_HOST_BUSY when in resetHannes Reinecke1-5/+2
When the HBA is in reset we should be returning 'busy' and not rely on the obscure 'last_reset' feature. [jejb: checkpatch fixes] Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] dpt_i2o: Remove DPTI_STATE_IOCTLHannes Reinecke2-19/+12
scsi_block_host/scsi_unlock_host provides the required functionality. [jejb: checkpatch fixes] Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] megaraid_sas: Fix synchronization problem between sysPD IO path and ↵Sumit.Saxena@lsi.com2-4/+7
AEN path There is syncronization problem between sysPD IO path and AEN path. Driver maintains instance->pd_list[] array, which will get updated(by calling function megasas_get_pd_list[]), whenever any of below events occurs- MR_EVT_PD_INSERTED MR_EVT_PD_REMOVED MR_EVT_CTRL_HOST_BUS_SCAN_REQUESTED MR_EVT_FOREIGN_CFG_IMPORTED At same time running sysPD IO will be accessing the same array instance->pd_list[], which is getting updated in AEN path, because of this IO may not get correct PD info from instance->pd_list[] array. Signed-off-by: Adam Radford <adam.radford@lsi.com> Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] lpfc: Fix typo on NULL assignmentFelipe Pena1-1/+1
In the lpfc_ct_free_iocb function after freeing associated memory to the ctiocb->context3, the ctiocb->context1 is set to NULL instead of context3. Signed-off-by: Felipe Pena <felipensp@gmail.com> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] scsi_dh_alua: ALUA handler attach should succeed while TPG is ↵Stewart, Sean1-10/+16
transitioning During testing, it was discovered that when a device tries to attach to the alua handler while in TPG state of transitioning, the alua_rtpg function will wait for it to exit the state before allowing it to continue. As a result, if the 60 second timeout expires, the alua handler will not attach to the device. To fix this, I have introduced an input argument to alua_rtpg called wait_for_transition. The idea is that it will wait for the transition to complete before an activation (because the current TPG state has some bearing in that case), but during a discovery if it is transitioning, it will not wait, and will store the state as standby for the time being. I believe the precedent exists for this from commit c0d289b3e59577532c45ee9110ef81bd7b341272 Since if the device reports a state of transitioning, it can transition to other more valid states, and it has been established TPGS is supported on the device, if it is attaching. Signed-off-by: Sean Stewart <Sean.Stewart@netapp.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] scsi_dh_alua: ALUA check sense should retry device internal reset ↵Stewart, Sean1-0/+5
unit attention When the scsi_dh_alua handler issues an RTPG during initialization, if it gets 0x06/0x29/0x04 as the sense, it will fail to attach the handler. NetApp E-Series returns 0x29/0x00 for power on, and 0x29/0x04 for conditions that cause the controller to reboot again. These conditions should be treated identically within the handler. Signed-off-by: Sean Stewart <Sean.Stewart@netapp.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] Revert "sg: use rwsem to solve race during exclusive open"James Bottomley1-41/+38
This reverts commit 15b06f9a02406e5460001db6d5af5c738cd3d4e7. This is one of four patches that was causing this bug [ 205.372823] ================================================ [ 205.372901] [ BUG: lock held when returning to user space! ] [ 205.372979] 3.12.0-rc6-hw-debug-pagealloc+ #67 Not tainted [ 205.373055] ------------------------------------------------ [ 205.373132] megarc.bin/5283 is leaving the kernel with locks still held! [ 205.373212] 1 lock held by megarc.bin/5283: [ 205.373285] #0: (&sdp->o_sem){.+.+..}, at: [<ffffffff8161e650>] sg_open+0x3a0/0x4d0 Cc: Vaughan Cao <vaughan.cao@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] Revert "sg: no need sg_open_exclusive_lock"James Bottomley1-5/+29
This reverts commit 00b2d9d6d05b56fc1d77071ff8ccbd2c65b48dec. This is one of four patches that was causing this bug [ 205.372823] ================================================ [ 205.372901] [ BUG: lock held when returning to user space! ] [ 205.372979] 3.12.0-rc6-hw-debug-pagealloc+ #67 Not tainted [ 205.373055] ------------------------------------------------ [ 205.373132] megarc.bin/5283 is leaving the kernel with locks still held! [ 205.373212] 1 lock held by megarc.bin/5283: [ 205.373285] #0: (&sdp->o_sem){.+.+..}, at: [<ffffffff8161e650>] sg_open+0x3a0/0x4d0 Cc: Vaughan Cao <vaughan.cao@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] Revert "sg: checking sdp->detached isn't protected when open"James Bottomley1-9/+8
This reverts commit e32c9e6300e3af659cbfe45e90a1e7dcd3572ada. This is one of four patches that was causing this bug [ 205.372823] ================================================ [ 205.372901] [ BUG: lock held when returning to user space! ] [ 205.372979] 3.12.0-rc6-hw-debug-pagealloc+ #67 Not tainted [ 205.373055] ------------------------------------------------ [ 205.373132] megarc.bin/5283 is leaving the kernel with locks still held! [ 205.373212] 1 lock held by megarc.bin/5283: [ 205.373285] #0: (&sdp->o_sem){.+.+..}, at: [<ffffffff8161e650>] sg_open+0x3a0/0x4d0 Cc: Vaughan Cao <vaughan.cao@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] Revert "sg: push file descriptor list locking down to per-device locking"James Bottomley1-34/+28
This reverts commit 1f962ebcdfa15cede59e9edb299d1330949eec92. This is one of four patches that was causing this bug [ 205.372823] ================================================ [ 205.372901] [ BUG: lock held when returning to user space! ] [ 205.372979] 3.12.0-rc6-hw-debug-pagealloc+ #67 Not tainted [ 205.373055] ------------------------------------------------ [ 205.373132] megarc.bin/5283 is leaving the kernel with locks still held! [ 205.373212] 1 lock held by megarc.bin/5283: [ 205.373285] #0: (&sdp->o_sem){.+.+..}, at: [<ffffffff8161e650>] sg_open+0x3a0/0x4d0 Cc: Vaughan Cao <vaughan.cao@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] esas2r: Cleanup snprinf formatting of firmware versionBradley Grove1-3/+3
Signed-off-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] esas2r: Remove superfluous mask of pcie_cap_regBradley Grove1-1/+1
Signed-off-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] esas2r: Fixes for big-endian platformsBradley Grove2-9/+9
In esas2r_format_init_msg(), sgl_page_size and epoch_time params are converted to little endian and the firmware version read from the hba is converted to cpu endianess. In esas2r_rq_init_request, correct and simplify the construction of the SCSI handle. These fixes are the result of testing on a PPC64 machine. Signed-off-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] esas2r: Directly call kernel functions for atomic bit operationsBradley Grove10-306/+291
Previously the code embedded the kernel's test_bit/clear_bit functions in wrappers that accepted u32 parameters. The wrapper cast these parameters to longs before passing them to the kernel's bit functions. This did not work properly on platforms with 64-bit longs. Signed-off-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] lpfc 8.3.43: Update lpfc version to driver version 8.3.43James Smart1-1/+1
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] lpfc 8.3.43: Fixed not processing task management IOCB response statusJames Smart4-21/+104
This patch implements the changes requested by Jeremy Linton: http://marc.info/?l=linux-scsi&m=136242124409687&w=2 The patch revises the command issuing behavior, detecting cases where the Task Mgmt command may have completed but with a non-successful status, which it previously treated as a successful TMF. The patch also corrects a flushing of I/O that was done which should only be done on successful TMF completion. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] lpfc 8.3.43: Fixed spinlock hang.James Smart1-2/+6
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] lpfc 8.3.43: Fixed invalid Total_Data_Placed value received for els ↵James Smart2-4/+40
and ct command responses Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] lpfc 8.3.43: Fixed invalid fcp_rsp length fir FCP_ICMNDJames Smart2-8/+35
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] lpfc 8.3.43: Fixed invalid mailbox timeoutsJames Smart1-0/+112
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] lpfc 8.3.43: Fixed spinlock inversion problem.James Smart1-4/+5
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] lpfc 8.3.43: Fix crash after xri limit is reached.James Smart2-7/+13
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] Derive the FLUSH_TIMEOUT from the basic I/O timeoutJames Bottomley2-4/+10
Rather than having a separate constant for specifying the timeout on FLUSH operations, use the basic I/O timeout value that is already configurable on a per target basis to derive the FLUSH timeout. Looking at the current definitions of these timeout values, the FLUSH operation is supposed to have a value that is twice the normal timeout value. This patch preserves this relationship while leveraging the flexibility of specifying the I/O timeout. Based on a prior patch by KY Srinivasan <kys@microsoft.com> Reviewed-by: KY Srinivasan <kys@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>