summaryrefslogtreecommitdiff
path: root/drivers/soundwire
AgeCommit message (Collapse)AuthorFilesLines
2020-01-16soundwire: cadence: fix kernel-doc parameter descriptionsPierre-Louis Bossart1-1/+1
Fix previous update, bad git merge likely. oops. Fixes: 39737a313085fa ("soundwire: cadence: update kernel-doc parameter descriptions") Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200114233124.13888-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-14soundwire: intel: fix factor of two in MCLK handlingBard Liao1-0/+3
Somehow Intel folks were confused, the property is 2x what the mclk frequency actually is (checked the actual bus frequency with a scope) Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200113231129.19049-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-14soundwire: bus: fix device number leak on errorsPierre-Louis Bossart1-14/+23
If the programming of the dev_number fails due to an IO error, a new device_number will be assigned, resulting in a leak. Make sure we only assign a device_number once per Slave device. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200113225637.17313-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-14soundwire: cadence: remove useless variable incrementationPierre-Louis Bossart1-2/+0
Fix cppcheck warning: drivers/soundwire/cadence_master.c:992:9: style: Variable 'offset' is assigned a value that is never used. [unreadVariable] offset += stream->num_out; ^ Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200113211025.27973-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-14soundwire: cadence: update kernel-doc parameter descriptionsPierre-Louis Bossart1-0/+4
make W=1 reports inconsistencies with parameter descriptions, fix Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200113211025.27973-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-14soundwire: qcom: add support for SoundWire controllerSrinivas Kandagatla3-0/+874
Qualcomm SoundWire Master controller is present in most Qualcomm SoCs either integrated as part of WCD audio codecs via slimbus or as part of SOC I/O. This patchset adds support to a very basic controller which has been tested with WCD934x SoundWire controller connected to WSA881x smart speaker amplifiers. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200113132153.27239-3-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-14soundwire: bus: check first if Slaves become UNATTACHEDPierre-Louis Bossart1-0/+18
Before checking for the presence of Device0, we first need to clean-up the internal state of Slaves that are no longer attached. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200110215731.30747-7-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-14soundwire: cadence_master: handle multiple status reports per SlavePierre-Louis Bossart1-6/+29
When a Slave reports multiple status in the sticky bits, find the latest configuration from the mirror of the PING frame status and update the status directly. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200110215731.30747-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-14soundwire: cadence_master: remove config update for interrupt settingRander Wang1-3/+2
Config only needs to be updated when setting MCP_Config, MCP_Control and MCP_CmdCtrl to make these register setting effective. When updating config in master, master will communicate with slave to update status. Communication will be failed when masters and slaves are in clock stop state, and this unnecessary config update makes interrupt setting failed. Tested on Comet Lake with soundwire enabled Signed-off-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200110215731.30747-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-14soundwire: cadence_master: log more useful information during timeoutsPierre-Louis Bossart1-1/+2
Add the type of command, device number, register offset and length to reverse engineer what caused the issue. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200110215731.30747-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-14soundwire: cadence_master: clear interrupt status before enabling interruptRander Wang1-0/+10
make sure all interrupts status are cleared before enabling interrupt so that there is no unexpected interrupt triggered. Signed-off-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200110215731.30747-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-14soundwire: cadence_master: filter out bad interruptsPierre-Louis Bossart1-0/+7
If somehow we read the interrupt status while the IP is not powered the result is probably undefined or 0xffffffff. We do know that some of the bits are reserved and read as zero, so use as a filter to discard invalid configurations. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200110215731.30747-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-10soundwire: stream: remove redundant pr_err tracesPierre-Louis Bossart1-8/+0
Only keep pr_err to flag critical configuration errors that will typically only happen during system integration. For errors on prepare/deprepare/enable/disable, the caller can do a much better job with more information on the DAI and device that caused the issue. Suggested-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200108175438.13121-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-12soundwire: intel: update stream callbacks for hwparams/free stream operationsRander Wang3-8/+17
The SoundWire DAIs for Intel platform are created in drivers/soundwire/intel.c, while the communication with the Intel DSP is all controlled in soc/sof/intel When the DAI status changes, a callback is used to bridge the gap between the two subsystems. The naming of the existing 'config_stream' callback does not map well with any of ALSA/ASoC concepts. This patch renames it as 'params_stream' to be more self-explanatory. A new 'free_stream' callback is added in case any resources allocated in the 'params_stream' stage need to be released. In the SOF implementation, this is used in the hw_free case to release the DMA channels over IPC. These two callbacks now rely on structures which expose the link_id and alh_stream_id (required by the firmware IPC), instead of a list of parameters. The 'void *' definitions are changed to use explicit types, as suggested on alsa-devel during earlier reviews. Signed-off-by: Rander Wang <rander.wang@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191212014507.28050-7-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-12soundwire: intel: update interfaces between ASoC and SoundWirePierre-Louis Bossart2-27/+13
The current interfaces between ASoC and SoundWire are limited by the platform_device infrastructure to an init() and exit() (mapped to the platform driver.probe and .remove) To help with the platform detection, machine driver selection and management of power dependencies between DSP and SoundWire IP, the ASoC side requires: a) an ACPI scan helper, to report if any devices are exposed in the DSDT tables, and if any links are disabled by the BIOS. b) a probe helper that allocates the resources without actually starting the bus. c) a startup helper which does start the bus when all power dependencies are settled. d) an exit helper to free all resources e) an interrupt_enable/disable helper, typically invoked after the startup helper but also used in suspend routines. This patch moves all required interfaces to sdw_intel.h, mainly to allow SoundWire and ASoC parts to be merged separately once the header files are shared between trees. To avoid compilation issues, the conflicts in intel_init.c are blindly removed. This would in theory prevent the code from working, but since there are no users of the Intel Soundwire driver this has no impact. Functionality will be restored when the removal of platform devices is complete. Support for SoundWire + SOF builds will only be provided once all the required pieces are upstream. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191212014507.28050-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-11Merge 5.4-rc7 into char-misc-nextGreg Kroah-Hartman3-3/+5
We need the char/misc driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-09soundwire: ignore uniqueID when irrelevantPierre-Louis Bossart2-7/+52
The uniqueID is useful when there are two or more devices of the same type (identical manufacturer ID, part ID) on the same link. When there is a single device of a given type on a link, its uniqueID is irrelevant. It's not uncommon on actual platforms to see variations of the uniqueID, or differences between devID registers and ACPI _ADR fields. This patch suggests a filter on startup to identify 'single' devices and tag them accordingly. The uniqueID is then not used for the probe, and the device name omits the uniqueID as well. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191022234808.17432-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-09soundwire: slave: add helper to extract slave IDPierre-Louis Bossart1-19/+31
Simplify the loop with a helper. The only functionality change is that we continue the loop even with an ACPI error. Follow-up patches will build on this change. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191022234808.17432-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-09soundwire: intel: fix PDI/stream mapping for BulkPierre-Louis Bossart1-2/+8
The previous formula is incorrect for PDI0/1, the mapping is not linear but has a discontinuity between PDI1 and PDI2. This change has no effect on PCM PDIs (same mapping). Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191022232948.17156-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-24soundwire: cadence_master: make clock stop exit configurable on initPierre-Louis Bossart3-9/+10
The use of clock stop is not a requirement, the IP can e.g. be completely power gated and not detect any wakes while in s2idle/deep sleep. For now clock-stop is not supported anyways so the control parameter is always false. This will be revisited when we add clock stop. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191022235448.17586-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-24soundwire: intel/cadence: add flag for interrupt enablePierre-Louis Bossart3-13/+20
Prepare for future PM support and fix error handling by disabling interrupts as needed. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191022235448.17586-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-24soundwire: intel: add helper for initializationPierre-Louis Bossart1-5/+11
Move code to helper for reuse in power management routines Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191022235448.17586-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-24soundwire: cadence_master: add hw_reset capability in debugfsPierre-Louis Bossart1-0/+23
Provide debugfs capability to kick link and devices into hard-reset (as defined by MIPI). This capability is really useful when some devices are no longer responsive and/or to check the software handling of resynchronization. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191022235448.17586-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-24soundwire: intel/cadence: fix startup sequencePierre-Louis Bossart3-26/+69
Multiple changes squashed in single patch to avoid tick-tock effect and avoid breaking compilation/bisect 1. Per the hardware documentation, all changes to MCP_CONFIG, MCP_CONTROL, MCP_CMDCTRL and MCP_PHYCTRL need to be validated with a self-clearing write to MCP_CONFIG_UPDATE. Add a helper and do the update when the CONFIG is changed. 2. Move interrupt enable after interrupt handler registration 3. Add a new helper to start the hardware bus reset with maximum duration to make sure the Slave(s) correctly detect the reset pattern and to ensure electrical conflicts can be resolved. 4. flush command FIFOs Better error handling will be provided after interrupt disable is provided in follow-up patches. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191022235448.17586-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-24soundwire: slave: fix scanf formatPierre-Louis Bossart1-1/+2
fix cppcheck warning: [drivers/soundwire/slave.c:145]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'signed int *'. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191022233147.17268-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-22soundwire: intel: use correct header for io callsVinod Koul1-1/+1
Commit df72b7192119 ("soundwire: intel: add missing headers for cross-compilation") tried to fix cross compilation but erroneously used wrong header in one of the file. Fix it by using correct io.h header. Reported-by: kbuild test robot <lkp@intel.com> Fixes: df72b7192119 ("soundwire: intel: add missing headers for cross-compilation") Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-21soundwire: intel: fix intel_register_dai PDI offsets and numbersBard Liao1-2/+2
There are two issues, likely copy/paste: 1. Use cdns->pcm.num_in instead of stream_num_in for consistency with the rest of the code. This was not detected earlier since platforms did not have input-only PDIs. 2. use the correct offset for bi-dir PDM, based on IN and OUT PDIs. Again this was not detected since PDM was not supported earlier. Reported-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190916192348.467-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-21soundwire: cadence_master: improve PDI allocationBard Liao3-19/+17
PDI number should match dai->id, there is no need to track if a PDI is allocated or not. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190916192348.467-7-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-21soundwire: intel: don't filter out PDI0/1Pierre-Louis Bossart1-18/+11
PDI0/1 are reserved for Bulk and filtered out in the existing code. That leads to endless confusions on whether the index is the raw or corrected one. In addition we will need support for Bulk at some point so it's just simpler to expose those PDIs and not use it for now than try to be smart unless we have to remove the smarts. This patch requires a topology change to use PDIs starting at offset 2 explicitly. Note that there is a known discrepancy between hardware documentation and what ALH stream works in practice, future fixes are likely. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190916192348.467-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-21soundwire: cadence/intel: simplify PDI/port mappingPierre-Louis Bossart3-224/+51
The existing Linux code uses a 1:1 mapping between ports and PDIs, but still has an independent allocation of ports and PDIs. Let's simplify the code and remove the port layer by only using PDIs. This patch does not change any functionality, just removes unnecessary code. This will also allow for further simplifications where the PDIs are not dynamically allocated but instead described in a topology file. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190916192348.467-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-21soundwire: intel: remove playback/capture stream_nameBard Liao1-17/+0
We will create dai widget in SOF. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190916192348.467-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-21soundwire: remove DAI_ID_RANGE definitionsPierre-Louis Bossart1-2/+0
There is no reason to reserve a range of DAI IDs for SoundWire. This is not scalable and it's better to let the ASoC core allocate the dai->id when registering a component. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190916192348.467-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-16soundwire: intel: remove X86 dependencyPierre-Louis Bossart1-1/+1
This is not needed and may generate unmet dependencies when COMPILE_TEST is used for SOF. ACPI is required, and should be tested when selecting this option. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190916185739.32184-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-16soundwire: intel: add missing headers for cross-compilationPierre-Louis Bossart2-0/+2
readl/writel and ioread32 are used without the relevant headers, fix. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190916185739.32184-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-15soundwire: depend on ACPI || OFMichal Suchanek1-1/+1
Now devicetree is supported for probing soundwire as well. On platforms built with !ACPI !OF (ie s390x) the device still cannot be probed and gives a build warning. Cc: stable@vger.kernel.org Fixes: a2e484585ad3 ("soundwire: core: add device tree support for slave devices") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Link: https://lore.kernel.org/r/0b89b4ea16a93f523105c81a2f718b0cd7ec66f2.1570097621.git.msuchanek@suse.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-15soundwire: depend on ACPIMichal Suchanek1-0/+1
The device cannot be probed on !ACPI and gives this warning: drivers/soundwire/slave.c:16:12: warning: ‘sdw_slave_add’ defined but not used [-Wunused-function] static int sdw_slave_add(struct sdw_bus *bus, ^~~~~~~~~~~~~ Cc: stable@vger.kernel.org Fixes: 7c3cd189b86d ("soundwire: Add Master registration") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Link: https://lore.kernel.org/r/bd685232ea511251eeb9554172f1524eabf9a46e.1570097621.git.msuchanek@suse.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-09-22Merge tag 'soundwire-5.4-rc1' of ↵Linus Torvalds12-99/+718
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire updates from Vinod Koul: "This includes DT support thanks to Srini and more work done by Intel (Pierre) on improving cadence and intel support. Summary: - Add DT bindings and DT support in core - Add debugfs support for soundwire properties - Improvements on streaming handling to core - Improved handling of Cadence module - More updates and improvements to Intel driver" * tag 'soundwire-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (30 commits) soundwire: stream: make stream name a const pointer soundwire: Add compute_params callback soundwire: core: add device tree support for slave devices dt-bindings: soundwire: add slave bindings soundwire: bus: set initial value to port_status soundwire: intel: handle disabled links soundwire: intel: add debugfs register dump soundwire: cadence_master: add debugfs register dump soundwire: add debugfs support soundwire: intel: remove unused variables soundwire: intel: move shutdown() callback and don't export symbol soundwire: cadence_master: add kernel parameter to override interrupt mask soundwire: intel_init: add kernel module parameter to filter out links soundwire: cadence_master: fix divider setting in clock register soundwire: cadence_master: make use of mclk_freq property soundwire: intel: read mclk_freq property from firmware soundwire: add new mclk_freq field for properties soundwire: stream: remove unnecessary variable initializations soundwire: stream: fix disable sequence soundwire: include mod_devicetable.h to avoid compiling warnings ...
2019-09-04soundwire: stream: make stream name a const pointerSrinivas Kandagatla1-1/+1
Make stream name const pointer Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20190813083550.5877-3-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-09-04soundwire: Add compute_params callbackVinod Koul1-0/+10
This callback allows masters to compute the bus parameters required. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20190813083550.5877-2-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-09-04soundwire: core: add device tree support for slave devicesSrinivas Kandagatla3-0/+55
This patch adds support to parsing device tree based SoundWire slave devices. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20190829163514.11221-3-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-09-04soundwire: bus: set initial value to port_statusBard Liao1-1/+1
port_status[port_num] are assigned for each port_num in some if conditions. So some of the port_status may not be initialized. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190829181135.16049-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-23soundwire: intel: handle disabled linksPierre-Louis Bossart1-3/+22
On most hardware platforms, SoundWire interfaces are pin-muxed with other interfaces (typically DMIC or I2S) and the status of each link needs to be checked at boot time. For Intel platforms, the BIOS provides a menu to enable/disable the links separately, and the information is provided to the OS with an Intel-specific _DSD property. The same capability will be added to revisions of the MIPI DisCo specification. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190821185821.12690-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-23soundwire: intel: add debugfs register dumpPierre-Louis Bossart1-0/+121
Add debugfs file to dump the Intel SoundWire registers Credits: this patch is based on an earlier internal contribution by Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190821185821.12690-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-23soundwire: cadence_master: add debugfs register dumpPierre-Louis Bossart2-0/+111
Add debugfs file to dump the Cadence master registers. Credits: this patch is based on an earlier internal contribution by Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190821185821.12690-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-23soundwire: add debugfs supportPierre-Louis Bossart6-0/+181
Add base debugfs mechanism for SoundWire bus by creating soundwire root and master-N and slave-x hierarchy. Also add SDW Slave SCP, DP0 and DP-N register debug file. Registers not implemented will print as "XX" Credits: this patch is based on an earlier internal contribution by Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190821185821.12690-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-22soundwire: intel: remove unused variablesVinod Koul1-1/+0
Variables 'nval' and 'i' are no longer used sdw_master_read_intel_prop() so remove them. drivers/soundwire/intel.c: In function 'sdw_master_read_intel_prop': drivers/soundwire/intel.c:829:12: warning: unused variable 'i' [-Wunused-variable] int nval, i; ^ drivers/soundwire/intel.c:829:6: warning: unused variable 'nval' [-Wunused-variable] int nval, i; ^~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 085f4ace103d ("soundwire: intel: read mclk_freq property from firmware") Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-21soundwire: intel: move shutdown() callback and don't export symbolPierre-Louis Bossart3-18/+15
All DAI callbacks are in intel.c except for shutdown. Move and remove export symbol Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190806005522.22642-18-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-21soundwire: cadence_master: add kernel parameter to override interrupt maskPierre-Louis Bossart1-0/+7
The code has a set of defaults which may not be relevant in all cases, add kernel parameter as a helper - mostly for early board bring-up. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190806005522.22642-17-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-21soundwire: intel_init: add kernel module parameter to filter out linksPierre-Louis Bossart1-0/+11
The hardware and ACPI info may report the presence of links that are not physically enabled (e.g. due to pin-muxing or hardware reworks), which in turn can result in errors being thrown. This shouldn't be the case for production devices but will happen a lot on development devices - even more so when they expose a connector. Even when the ACPI information is correct, it's useful to be able to only enable the links that need attention - mostly to filter out dynamic debug messages. Add a module parameter to filter out such links, e.g. adding the following config to a file in /etc/modprobe.d will select the second and third links only. options soundwire_intel_init sdw_link_mask=0x6 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190806005522.22642-16-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-21soundwire: cadence_master: fix divider setting in clock registerRander Wang1-8/+8
The existing code uses an OR operation which would mix the original divider setting with the new one, resulting in an invalid configuration that can make codecs hang. Add the mask definition and use cdns_updatel to update divider Signed-off-by: Rander Wang <rander.wang@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190806005522.22642-14-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>