summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-stm32.c
AgeCommit message (Collapse)AuthorFilesLines
2023-10-30spi: Merge up fixMark Brown1-0/+8
One small fix that didn't seem worth sending before the merge window.
2023-10-17spi: stm32: Explicitly include correct DT includesRob Herring1-1/+2
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it was merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Acked-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231017203352.2698326-1-robh@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-09-11spi: stm32: add a delay before SPI disableValentin Caron1-0/+8
As explained in errata sheet, in section "2.14.5 Truncation of SPI output signals after EOT event": On STM32MP1x, EOT interrupt can be thrown before the true end of communication. So we add a delay of a half period to wait the real end of the transmission. Link: https://www.st.com/resource/en/errata_sheet/es0539-stm32mp131x3x5x-device-errata-stmicroelectronics.pdf Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/r/20230906132735.748174-1-valentin.caron@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-29Merge tag 'spi-v6.6' of ↵Linus Torvalds1-6/+12
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "There's been quite a lot of generic activity here, but more administrative than featuers. We also have a bunch of new drivers, including one that's part of a MFD so we pulled in the core parts of that: - Lots of work from both Yang Yingliang and Andy Shevchenko on moving to host/device/controller based terminology for devices. - QuadSPI SPI support for Allwinner sun6i. - New device support Cirrus Logic CS43L43, Longsoon, Qualcomm GENI QuPv3 and StarFive JH7110 QSPI" * tag 'spi-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (151 commits) spi: at91-usart: Use PTR_ERR_OR_ZERO() to simplify code spi: spi-sn-f-ospi: switch to use modern name spi: sifive: switch to use modern name spi: sh: switch to use modern name spi: sh-sci: switch to use modern name spi: sh-msiof: switch to use modern name spi: sh-hspi: switch to use modern name spi: sc18is602: switch to use modern name spi: s3c64xx: switch to use modern name spi: rzv2m-csi: switch to use devm_spi_alloc_host() spi: rspi: switch to use spi_alloc_host() spi: rockchip: switch to use modern name spi: rockchip-sfc: switch to use modern name spi: realtek-rtl: switch to use devm_spi_alloc_host() spi: rb4xx: switch to use modern name spi: qup: switch to use modern name spi: spi-qcom-qspi: switch to use modern name spi: pxa2xx: switch to use modern name spi: ppc4xx: switch to use modern name spi: spl022: switch to use modern name ...
2023-08-21spi: stm32: fix accidential revert to byte-sized transfer splittingLeonard Göhrs1-3/+3
Commit 6f486556abe35 ("spi: stm32: renaming of spi_master into spi_controller") included an accidential reverted of a change added in commit 1e4929112507f ("spi: stm32: split large transfers based on word size instead of bytes"). This breaks large SPI transfers with word sizes > 8 bits, which are e.g. common when driving MIPI DBI displays. Fix this by using `spi_split_transfers_maxwords()` instead of `spi_split_transfers_maxsize()`. Fixes: 6f486556abe35 ("spi: stm32: renaming of spi_master into spi_controller") Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de> Link: https://lore.kernel.org/r/20230816145237.3159817-1-l.goehrs@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-27spi: stm32: Remove redundant dev_err_probe()Ruan Jinjie1-2/+1
There is no need to call the dev_err_probe() function directly to print a custom message when handling an error from platform_get_irq() function as it is going to display an appropriate error message in case of a failure. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Link: https://lore.kernel.org/r/20230727110558.2904084-1-ruanjinjie@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-12spi: Header and core clean up and refactoringMark Brown1-1/+1
Merge series from Andy Shevchenko <andriy.shevchenko@linux.intel.com>: Various cleanups and refactorings of the SPI header and core parts united in a single series. It also touches drivers under SPI subsystem folder on the pure renaming purposes of some constants. No functional change intended.
2023-07-11spi: Get rid of old SPI_MASTER_MUST_TX & SPI_MASTER_MUST_RXAndy Shevchenko1-1/+1
Convert the users from SPI_MASTER_MUST_TX and/or SPI_MASTER_MUST_RX to SPI_CONTROLLER_MUST_TX and/or SPI_CONTROLLER_MUST_RX respectively and kill the not used anymore definitions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230710154932.68377-13-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-10spi: stm32: disable device mode with st,stm32f4-spi compatibleValentin Caron1-3/+10
STM32 SPI driver is not capable to handle device mode with stm32f4 soc. Stop probing if this case happens. Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/r/20230706081342.468090-1-valentin.caron@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-15spi: stm32: introduction of stm32h7 SPI device mode supportValentin Caron1-34/+78
Add support for stm32h7 to use SPI controller in device role. In such case, the spi instance should have the spi-slave property defined. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/r/20230615075815.310261-5-valentin.caron@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-15spi: stm32: use dmaengine_terminate_{a}sync instead of _allAlain Volmat1-5/+5
Avoid usage of deprecated dmaengine_terminate_all and use dmaengine_terminate_sync and dmaengine_terminate_async instead. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/r/20230615075815.310261-3-valentin.caron@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-15spi: stm32: renaming of spi_master into spi_controllerAlain Volmat1-77/+77
Preparing introduction of SPI device, rename the spi_master structure into spi_controller. This doesn't have any functional impact since spi_master was already a macro for spi_controller. Referring now to ctrl instead of master since the spi_controller structure might not be used as a master controller only. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/r/20230615075815.310261-2-valentin.caron@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-04-04spi: stm32: Use devm_platform_get_and_ioremap_resource()Yang Li1-2/+1
According to commit 890cc39a8799 ("drivers: provide devm_platform_get_and_ioremap_resource()"), convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20230328061839.82185-1-yang.lee@linux.alibaba.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-16spi: stm32: split large transfers based on word size instead of bytesLeonard Göhrs1-3/+3
The TSIZE register in CR2, to which the number of words to transfer is written, is only 16 Bit. This limits transfers to 65535 SPI _words_ at a time. The existing code uses spi_split_transfers_maxsize to limit transfers to 65535 _bytes_ at a time. This breaks large transfers with bits_per_word > 8, as they are split inside of a word boundary by the odd size limit. Split transfers based on the number of words instead. This has the added benefit of not artificially limiting the maximum length of bpw > 8 transfers to half or a quarter of the actual limit. The combination of very large transfers and bits_per_word = 16 is triggered e.g. by MIPI DBI displays when updating large parts of the screen. Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de> Acked-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/20230310092053.1006459-2-l.goehrs@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-07spi: stm32: Convert to platform remove callback returning voidUwe Kleine-König1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230303172041.2103336-74-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-03spi: stm32: fix stm32_spi_prepare_mbr() that halves spi clk for every runSean Nyekjaer1-1/+1
When this driver is used with a driver that uses preallocated spi_transfer structs. The speed_hz is halved by every run. This results in: spi_stm32 44004000.spi: SPI transfer setup failed ads7846 spi0.0: SPI transfer failed: -22 Example when running with DIV_ROUND_UP(): - First run; speed_hz = 1000000, spi->clk_rate 125000000 div 125 -> mbrdiv = 7, cur_speed = 976562 - Second run; speed_hz = 976562 div 128,00007 (roundup to 129) -> mbrdiv = 8, cur_speed = 488281 - Third run; speed_hz = 488281 div 256,000131072067109 (roundup to 257) and then -EINVAL is returned. Use DIV_ROUND_CLOSEST to allow to round down and allow us to keep the set speed. Signed-off-by: Sean Nyekjaer <sean@geanix.com> Link: https://lore.kernel.org/r/20221103080043.3033414-1-sean@geanix.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-10-24spi: stm32: Print summary 'callbacks suppressed' messageMarek Vasut1-0/+1
The original fix "spi: stm32: Rate-limit the 'Communication suspended' message" still leads to "stm32h7_spi_irq_thread: 1696 callbacks suppressed" spew in the kernel log. Since this 'Communication suspended' message is a debug print, add RATELIMIT_MSG_ON_RELEASE flag to inhibit the "callbacks suspended" part during normal operation and only print summary at the end. Fixes: ea8be08cc9358 ("spi: stm32: Rate-limit the 'Communication suspended' message") Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20221018183513.206706-1-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-25spi: stm32: using pm_runtime_resume_and_get instead of pm_runtime_get_syncMinghao Chi1-2/+1
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and pm_runtime_put_noidle. This change is just to simplify the code, no actual functional changes. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220420090452.2588930-1-chi.minghao@zte.com.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-22spi: stm32: ignore Rx queue not empty in stm32f4 Tx only modeAhmad Fatoum1-1/+1
STM32F4_SPI_SR_RXNE and STM32F4_SPI_SR_OVR are distinct bits in the same status register. ~STM32F4_SPI_SR_OVR | STM32F4_SPI_SR_RXNE is thus equal to ~STM32F4_SPI_SR_OVR. The original intention was likely for transmission-only transfers to ignore interrupts both for when the Rx queue has bytes (RXNE) as well as when these bytes haven't been read in time (OVR). Fix the typo by adding the missing parenthesis. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.kernel.org/r/20220201115142.3999860-1-a.fatoum@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-19spi: stm32: make SPI_MASTER_MUST_TX flags only specific to STM32F4Alain Volmat1-1/+4
Commit 61367d0b8f5e ("spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4") allowed to properly communicate with the st-gyro-spi even when there is no tx_buf provided by setting the flag SPI_MASTER_MUST_TX and thus forcing a dummy TX buffer to work in Full Duplex. This behavior should kept only for the STM32F4 and not for other compatible since the STM32H7 do support SIMPLEX_RX and SIMPLEX_TX. Add the flags variable within the struct stm32_spi_cfg so that flags used at master registration time are compatible specific. Fixes: 61367d0b8f5e ("spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4") Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/20220119093245.624878-3-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-19spi: stm32: remove inexistant variables in struct stm32_spi_cfg commentAlain Volmat1-2/+0
Variables 'can_dma' and 'has_startbit' are described within the struct stm32_spi_cfg comment but have never existed in this structure so remove them. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/20220119093245.624878-2-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-20spi: stm32: fix excluded_middle.cocci warningskernel test robot1-2/+1
drivers/spi/spi-stm32.c:915:23-25: WARNING !A || A && B is equivalent to !A || B Condition !A || A && B is equivalent to !A || B. Generated by: scripts/coccinelle/misc/excluded_middle.cocci Fixes: 7ceb0b8a3ced ("spi: stm32: finalize message either on dma callback or EOT") CC: Alain Volmat <alain.volmat@foss.st.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Reviewed-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/20210713191004.GA14729@5eb5c2cbef84 Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-12spi: stm32: finalize message either on dma callback or EOTAlain Volmat1-37/+20
Depending on the usage, it is necessary to perform the finalize message operation either upon receiving the EOT interruption, eiher upon receiving the DMA callback. Indeed, when relying on DMA, even if the SPI EOT IT has been received, it is necessary to wait for the end of the DMA RX transaction before accessing to the data. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1625646426-5826-8-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-12spi: stm32h7: don't wait for EOT and flush fifo on disableAlain Volmat1-22/+2
In nominal cases, disable is called as part of the unprepare_message, after receiving a EOT and after receiving all data so it doesn't make sense to check for EOT and empty the FIFO. Moreover, at the end of the disable, the SPI is disable (SPE) leading to clear of all internal FIFO, leaving the IP in a known status. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1625646426-5826-7-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-12spi: stm32h7: rework rx fifo read functionAmelie Delaunay1-17/+13
Remove flush parameter and check RXWNE or RXPLVL when end of transfer flag is set. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1625646426-5826-6-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-12spi: stm32: Revert "properly handle 0 byte transfer"Alain Volmat1-4/+0
0 byte transfer handling is now done within the core in code added by commit b306320322c9 ("spi: Skip zero-length transfers in spi_transfer_one_message()") This reverts commit 2269f5a8b1a7 ("spi: stm32: properly handle 0 byte transfer") Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1625646426-5826-5-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-12spi: stm32: enable pm_runtime autosuspendAlain Volmat1-0/+11
This commit enables the pm_runtime autosuspend and sets a 1ms autosuspend delay. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1625646426-5826-3-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-07spi: stm32: fixes pm_runtime calls in probe/removeAlain Volmat1-1/+8
Add pm_runtime calls in probe/probe error path and remove in order to be consistent in all places in ordering and ensure that pm_runtime is disabled prior to resources used by the SPI controller. This patch also fixes the 2 following warnings on driver remove: WARNING: CPU: 0 PID: 743 at drivers/clk/clk.c:594 clk_core_disable_lock+0x18/0x24 WARNING: CPU: 0 PID: 743 at drivers/clk/clk.c:476 clk_unprepare+0x24/0x2c Fixes: 038ac869c9d2 ("spi: stm32: add runtime PM support") Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1625646426-5826-2-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-30spi: stm32h7: fix full duplex irq handler handlingAlain Volmat1-6/+9
In case of Full-Duplex mode, DXP flag is set when RXP and TXP flags are set. But to avoid 2 different handlings, just add TXP and RXP flag in the mask instead of DXP, and then keep the initial handling of TXP and RXP events. Also rephrase comment about EOTIE which is one of the interrupt enable bits. It is not triggered by any event. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/1625042723-661-3-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-15Merge branch 'for-5.12' of ↵Mark Brown1-1/+2
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-5.13
2021-03-19spi: stm32: Fix use-after-free on unbindAlain Volmat1-14/+10
stm32_spi_remove() accesses the driver's private data after calling spi_unregister_master() even though that function releases the last reference on the spi_master and thereby frees the private data. Fix by switching over to the new devm_spi_alloc_master() helper which keeps the private data accessible until the driver has unbound. Fixes: 8d559a64f00b ("spi: stm32: drop devres version of spi_register_master") Reported-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1616052290-10887-1-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-12spi: stm32: avoid ifdef CONFIG_PM for pm callbacksAlain Volmat1-8/+4
Avoid CONFIG_PM preprocessor check for pm suspend/resume callbacks and identify the functions with __maybe_unused. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1615545329-5496-1-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-12spi: stm32: drop devres version of spi_register_masterAntonio Borneo1-1/+2
A call to spi_unregister_master() triggers calling remove() for all the spi devices binded to the spi master. Some spi device driver requires to "talk" with the spi device during the remove(), e.g.: - a LCD panel like drivers/gpu/drm/panel/panel-lg-lg4573.c will turn off the backlighting sending a command over spi. This implies that the spi master must be fully functional when spi_unregister_master() is called, either if it is called explicitly in the master's remove() code or implicitly by the devres framework. Devres calls devres_release_all() to release all the resources "after" the remove() of the spi master driver (check code of __device_release_driver() in drivers/base/dd.c). If the spi master driver has an empty remove() then there would be no issue; the devres_release_all() will release everything in reverse order w.r.t. probe(). But if code in spi master driver remove() disables the spi or makes it not functional (like in this spi-stm32), then devres cannot be used safely for unregistering the spi master and the binded spi devices. Replace devm_spi_register_master() with spi_register_master() and add spi_unregister_master() as first action in remove(). Fixes: dcbe0d84dfa5 ("spi: add driver for STM32 SPI controller") Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1615545286-5395-1-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-05spi: stm32: make spurious and overrun interrupts visibleAlain Volmat1-11/+4
We do not expect to receive spurious interrupts so rise a warning if it happens. RX overrun is an error condition that signals a corrupted RX stream both in dma and in irq modes. Report the error and abort the transfer in either cases. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1612551572-495-9-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-05spi: stm32h7: replace private SPI_1HZ_NS with NSEC_PER_SECAmelie Delaunay1-3/+1
Replace SPI_1HZ_NS private constant with NSEC_PER_SEC, which is easier to read and understand. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1612551572-495-8-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-05spi: stm32: defer probe for resetAlain Volmat1-2/+8
Defer the probe operation when a reset controller device is expected but have not yet been probed. This change replaces use of devm_reset_control_get_exclusive() with devm_reset_control_get_optional_exclusive() as reset controller is optional which is now explicitly stated. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1612551572-495-7-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-05spi: stm32: driver uses reset controller only at initEtienne Carriere1-6/+5
Remove reset controller device reference from the device private structure since it is used only at probe time and can be discarded once used to reset the SPI device. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1612551572-495-6-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-05spi: stm32h7: ensure message are smaller than max sizeAlain Volmat1-0/+14
Ensure that messages given to transfer_one handler can actually be handled by it. For that purpose rely on the SPI framework spi_split_transfers_maxsize function to split messages whenever necessary. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1612551572-495-5-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-05spi: stm32: use bitfield macrosAmelie Delaunay1-36/+18
To avoid defining shift and mask separately and hand-coding the bit manipulation, use the bitfield macros. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1612551572-495-4-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-05spi: stm32: do not mandate cs_gpioAlain Volmat1-6/+0
CS gpios is not mandatory, the driver should allow working even when CS are not given. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1612551572-495-3-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-05spi: stm32: properly handle 0 byte transferAlain Volmat1-0/+4
On 0 byte transfer request, return straight from the xfer function after finalizing the transfer. Fixes: dcbe0d84dfa5 ("spi: add driver for STM32 SPI controller") Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1612551572-495-2-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-13spi: stm32: Simplify stm32h7_spi_prepare_fthlv()Marek Vasut1-24/+4
Simplify stm32h7_spi_prepare_fthlv() function implementation, no functional change intended. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alain Volmat <alain.volmat@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Amelie Delaunay <amelie.delaunay@st.com> Cc: Antonio Borneo <antonio.borneo@st.com> Cc: Mark Brown <broonie@kernel.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Roman Guskov <rguskov@dh-electronics.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-spi@vger.kernel.org Link: https://lore.kernel.org/r/20210104123114.261596-1-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-05spi: stm32: update dev_dbg() print format for SPI paramsAlexandru Ardelean1-4/+4
With the introduction of the 'include/uapi/linux/spi/spi.h' header, the type of the macros are enforced to 'unsigned long int' via the _BITUL() macro. This causes some -Wformat warnings in the spi-stm32 driver. This patch adds a double-negation operator to the bit-masks. Essentially, the important values for debugging are 0 or 1, while masking them directly would show 0 or BIT(x) values. This way, the type of the arguments are automatically re-cast. Fixes: f7005142dace ("spi: uapi: unify SPI modes into a single spi.h header") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210104143103.56510-1-alexandru.ardelean@analog.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-21spi: stm32: FIFO threshold level - fix align packet sizeRoman Guskov1-2/+2
if cur_bpw <= 8 and xfer_len < 4 then the value of fthlv will be 1 and SPI registers content may have been lost. * If SPI data register is accessed as a 16-bit register and DSIZE <= 8bit, better to select FTHLV = 2, 4, 6 etc * If SPI data register is accessed as a 32-bit register and DSIZE > 8bit, better to select FTHLV = 2, 4, 6 etc, while if DSIZE <= 8bit, better to select FTHLV = 4, 8, 12 etc Signed-off-by: Roman Guskov <rguskov@dh-electronics.com> Fixes: dcbe0d84dfa5 ("spi: add driver for STM32 SPI controller") Reviewed-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20201221123532.27272-1-rguskov@dh-electronics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-06spi: stm32: fix reference leak in stm32_spi_resumeZhang Qilong1-0/+1
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to pm_runtime_put_noidle will result in reference leak in stm32_spi_resume, so we should fix it. Fixes: db96bf976a4fc ("spi: stm32: fixes suspend/resume management") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Reviewed-by: Alain Volmat <alain.volmat@st.com> Link: https://lore.kernel.org/r/20201106015217.140476-1-zhangqilong3@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-09Merge remote-tracking branch 'spi/for-5.10' into spi-nextMark Brown1-8/+5
2020-10-02spi: spi-stm32: remove redundant irqsave and irqrestore in hardIRQBarry Song1-5/+4
Running in hardIRQ, disabling IRQ is redundant. Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Link: https://lore.kernel.org/r/20200926001616.21292-2-song.bao.hua@hisilicon.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-09spi: stm32: fix pm_runtime_get_sync() error checkingDan Carpenter1-1/+1
The pm_runtime_get_sync() can return either 0 or 1 on success but this code treats 1 as a failure. Fixes: db96bf976a4f ("spi: stm32: fixes suspend/resume management") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Alain Volmat <alain.volmat@st.com> Link: https://lore.kernel.org/r/20200909094304.GA420136@mwanda Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-08spi: stm32: Simplify with dev_err_probe()Krzysztof Kozlowski1-3/+1
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901152713.18629-8-krzk@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-07spi: stm32: Rate-limit the 'Communication suspended' messageMarek Vasut1-1/+5
The 'spi_stm32 44004000.spi: Communication suspended' message means that when using PIO, the kernel did not read the FIFO fast enough and so the SPI controller paused the transfer. Currently, this is printed on every single such event, so if the kernel is busy and the controller is pausing the transfers often, the kernel will be all the more busy scrolling this message into the log buffer every few milliseconds. That is not helpful. Instead, rate-limit the message and print it every once in a while. It is not possible to use the default dev_warn_ratelimited(), because that is still too verbose, as it prints 10 lines (DEFAULT_RATELIMIT_BURST) every 5 seconds (DEFAULT_RATELIMIT_INTERVAL). The policy here is to print 1 line every 50 seconds (DEFAULT_RATELIMIT_INTERVAL * 10), because 1 line is more than enough and the cycles saved on printing are better left to the CPU to handle the SPI. However, dev_warn_once() is also not useful, as the user should be aware that this condition is possibly recurring or ongoing. Thus the custom rate-limit policy. Finally, turn the message from dev_warn() to dev_dbg(), since the system does not suffer any sort of malfunction if this message appears, it is just slowing down. This further reduces the printing into the log buffer and frees the CPU to do useful work. Fixes: dcbe0d84dfa5 ("spi: add driver for STM32 SPI controller") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Amelie Delaunay <amelie.delaunay@st.com> Cc: Antonio Borneo <borneo.antonio@gmail.com> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20200905151913.117775-1-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-28 04:45:00 +0300