summaryrefslogtreecommitdiff
path: root/drivers/thermal/db8500_thermal.c
AgeCommit message (Collapse)AuthorFilesLines
2020-01-27thermal: db8500: Depromote debug printLinus Walleij1-2/+2
We are not interested in getting this debug print on our console all the time. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Stephan Gerhold <stephan@gerhold.net> Fixes: 6c375eccded4 ("thermal: db8500: Rewrite to be a pure OF sensor") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191119074650.2664-1-linus.walleij@linaro.org
2019-09-25thermal: db8500: Rewrite to be a pure OF sensorLinus Walleij1-370/+107
This patch rewrites the DB8500 thermal sensor to be a pure OF sensor, so that it can be used with thermal zones defined in the device tree. This driver was initially merged before we had generic thermal zone device tree bindings, and now it gets modernized to the way we do things these days. The old driver depended on a set of trigger points provided in the device tree or platform data to interpolate the current temperature between trigger points depending on whether the trend was rising or falling. This was bad because the trigger points should be used for defining temperature zone policies and bind to cooling devices. As the PRCMU (power reset control management unit) can only issue IRQs when we pass temperature trigger points upward or downward We instead define a number of temperature points inside the driver ranging from 15 to 100 degrees celsius. The effect is that when we register the device we quickly trigger 15, 20 ... up to the room temperature in succession and then we get continous event IRQs also under normal operating conditions, and the temperature of the system is now reported more accurately (+/- 2.5 degrees celsius) while in the past the first trigger point was at 70 degrees and the average temperature was simply reported as 35 degrees celsius (between 70 degrees and 0) until we passed 70 degrees which didn't accurately represent the temperature of the system. As a result of dropping all the trigger points from the driver and reusing the core DT thermal zone management code we reduce the code footprint quite a bit. Cc: Vincent Guittot <vincent.guittot@linaro.org> Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-09-25thermal: db8500: Use dev helper variableLinus Walleij1-15/+16
The code gets easier to read like this. Cc: Vincent Guittot <vincent.guittot@linaro.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-09-25thermal: db8500: Finalize device tree conversionLinus Walleij1-15/+15
At some point there was an attempt to convert the DB8500 thermal sensor to device tree: a probe path was added and the device tree was augmented for the Snowball board. The switchover was never completed: instead the thermal devices came from from the PRCMU MFD device and the probe on the Snowball was confused as another set of configuration appeared from the device tree. Move over to a device-tree only approach, as we fixed up the device trees. Cc: Vincent Guittot <vincent.guittot@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner1-10/+1
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-23thermal: db8500: Fix module autoloadJavier Martinez Canillas1-0/+1
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/thermal/db8500_thermal.ko | grep alias $ After this patch: $ modinfo drivers/thermal/db8500_thermal.ko | grep alias alias: of:N*T*Cstericsson,db8500-thermalC* alias: of:N*T*Cstericsson,db8500-thermal Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-09-27thermal: Enhance thermal_zone_device_update for eventsSrinivas Pandruvada1-1/+1
Added one additional parameter to thermal_zone_device_update() to provide caller with an optional capability to specify reason. Currently this event is used by user space governor to trigger different processing based on event code. Also it saves an additional call to read temperature when the event is received. The following events are cuurently defined: - Unspecified event - New temperature sample - Trip point violated - Trip point changed - thermal device up and down - thermal device power capability changed Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-08-03thermal: consistently use int for temperaturesSascha Hauer1-4/+3
The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-05-05thermal: of: fix cooling device weights in device treeKapileshwar Singh1-1/+1
Currently you can specify the weight of the cooling device in the device tree but that information is not populated to the thermal_bind_params where the fair share governor expects it to be. The of thermal zone device doesn't have a thermal_bind_params structure and arguably it's better to pass the weight inside the thermal_instance as it is specific to the bind of a cooling device to a thermal zone parameter. Core thermal code is fixed to populate the weight in the instance from the thermal_bind_params, so platform code that was passing the weight inside the thermal_bind_params continue to work seamlessly. While we are at it, create a default value for the weight parameter for those thermal zones that currently don't define it and remove the hardcoded default in of-thermal. Cc: Zhang Rui <rui.zhang@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Peter Feuerer <peter@piie.net> Cc: Darren Hart <dvhart@infradead.org> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Kapileshwar Singh <kapileshwar.singh@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-10-20thermal: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-03-26thermal: db8500: Fix missing mutex_unlock() in probe error pathsAxel Lin1-6/+11
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-03-26thermal: db8500: Fix checking return value of thermal_zone_device_registerAxel Lin1-1/+1
thermal_zone_device_register() returns ERR_PTR on error, thus use IS_ERR rather than IS_ERR_OR_NULL to check return value. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-01-04thermal: db8500: Use of_match_ptr() macro in db8500_thermal.cSachin Kamat1-3/+1
This eliminates having an #ifdef returning NULL for the case when OF is disabled. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Hongbo Zhang <hongbo.zhang@stericsson.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-11-15Thermal: Add ST-Ericsson DB8500 thermal driver.hongbo.zhang1-0/+531
This driver is based on the thermal management framework in thermal_sys.c. A thermal zone device is created with the trip points to which cooling devices can be bound, the current cooling device is cpufreq, e.g. CPU frequency is clipped down to cool the CPU, and other cooling devices can be added and bound to the trip points dynamically. The platform specific PRCMU interrupts are used to active thermal update when trip points are reached. Signed-off-by: hongbo.zhang <hongbo.zhang@linaro.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Francesco Lavra <francescolavra.fl@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>