summaryrefslogtreecommitdiff
path: root/drivers/thermal/imx8mm_thermal.c
AgeCommit message (Collapse)AuthorFilesLines
2023-10-16thermal/drivers/imx8mm_thermal: Fix function pointer declaration by adding ↵Bragatheswaran Manickavel1-1/+1
identifier name Added identifier names to respective definitions for fix warnings reported by checkpatch.pl WARNING: function definition argument 'void *' should also have an identifier name WARNING: function definition argument 'int *' should also have an identifier name Signed-off-by: Bragatheswaran Manickavel <bragathemanick0908@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230917083443.3220-1-bragathemanick0908@gmail.com
2023-09-29thermal: imx8mm: Convert to platform remove callback returning voidUwe Kleine-König1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-08-16thermal/drivers/imx8mm: Suppress log message on probe deferralAhmad Fatoum1-4/+2
nvmem_cell_read_u32() may return -EPROBE_DEFER if NVMEM supplier has not yet been probed. Future reprobe may succeed, so printing: i.mx8mm_thermal 30260000.tmu: Failed to read OCOTP nvmem cell (-517). to the log is confusing. Fix this by using dev_err_probe. This also elevates the message from warning to error, which is more correct: The log message is only ever printed in probe error path and probe aborts afterwards, so it really warrants an error-level message. Fixes: 403291648823 ("thermal/drivers/imx: Add support for loading calibration data from OCOTP") Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230708112647.2897294-1-a.fatoum@pengutronix.de
2023-07-31thermal: Explicitly include correct DT includesRob Herring1-1/+0
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-06-26thermal/drivers/imx: Remove redundant msg in imx8mm_tmu_probe() and ↵Yangtao Li1-2/+1
imx_sc_thermal_probe() The upper-layer devm_thermal_add_hwmon_sysfs() function can directly print error information. Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230620090732.50025-4-frank.li@vivo.com
2023-03-30thermal: Use of_property_present() for testing DT property presenceRob Herring1-1/+1
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-03-03thermal/hwmon: Use the right device for devm_thermal_add_hwmon_sysfs()Daniel Lezcano1-1/+1
The devres variant of thermal_add_hwmon_sysfs() only takes the thermal zone structure pointer as parameter. Actually, it uses the tz->device to add it in the devres list. It is preferable to use the device registering the thermal zone instead of the thermal zone device itself. That prevents the driver accessing the thermal zone structure internals and it is from my POV more correct regarding how devm_ is used. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> #amlogic_thermal Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> #sun8i_thermal Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek auxadc Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-03-03thermal/core: Use the thermal zone 'devdata' accessor in thermal located driversDaniel Lezcano1-1/+1
The thermal zone device structure is exposed to the different drivers and obviously they access the internals while that should be restricted to the core thermal code. In order to self-encapsulate the thermal core code, we need to prevent the drivers accessing directly the thermal zone structure and provide accessor functions to deal with. Use the devdata accessor introduced in the previous patch. No functional changes intended. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> #R-Car Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek auxadc and lvts Reviewed-by: Balsam CHIHI <bchihi@baylibre.com> #Mediatek lvts Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com> #da9062 Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> #spread Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> #sun8i_thermal Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #Broadcom Reviewed-by: Dhruva Gole <d-gole@ti.com> # K3 bandgap Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> #uniphier Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-15thermal: Remove core header inclusion from driversDaniel Lezcano1-1/+0
As the name states "thermal_core.h" is the header file for the core components of the thermal framework. Too many drivers are including it. Hopefully the recent cleanups helped to self encapsulate the code a bit more and prevented the drivers to need this header. Remove this inclusion in every place where it is possible. Some other drivers did a confusion with the core header and the one exported in linux/thermal.h. They include the former instead of the latter. The changes also fix this. The tegra/soctherm driver still remains as it uses an internal function which need to be replaced. The Intel HFI driver uses the netlink internal framework core and should be changed to prevent to deal with the internals. No functional changes intended. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> # armada_thermal.c Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> # uniphier_thermal.c Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> # rcar_gen3_thermal.c Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> # amlogic_thermal.c Acked-by: Florian Fainelli <f.fainelli@gmail.com> # bcm2835_thermal.c Acked-by: Thierry Reding <treding@nvidia.com> # tegra30-tsensor.c Link: https://lore.kernel.org/r/20230206153432.1017282-1-daniel.lezcano@linaro.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-12-14thermal/drivers/imx8mm: Add hwmon supportAlexander Stein1-0/+4
Expose thermal sensors as HWMON devices. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20220726122331.323093-1-alexander.stein@ew.tq-group.com Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2022-12-14thermal/drivers/imx: Add support for loading calibration data from OCOTPMarek Vasut1-0/+164
The TMU TASR, TCALIVn, TRIM registers must be explicitly programmed with calibration values in OCOTP. Add support for reading the OCOTP calibration data and programming those into the TMU hardware. The MX8MM/MX8MN TMUv1 uses only one OCOTP cell, while MX8MP TMUv2 uses 4, the programming differs in each case. Based on U-Boot commits: 70487ff386c ("imx8mm: Load fuse for TMU TCALIV and TASR") ebb9aab318b ("imx: load calibration parameters from fuse for i.MX8MP") Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2022-12-14thermal/drivers/imx8mm_thermal: Validate temperature rangeMarcus Folkesson1-1/+7
Check against the upper temperature limit (125 degrees C) before consider the temperature valid. Fixes: 5eed800a6811 ("thermal: imx8mm: Add support for i.MX8MM thermal monitoring unit") Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com> Link: https://lore.kernel.org/r/20221014073507.1594844-1-marcus.folkesson@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-12-14thermal/drivers/imx8mm_thermal: Use GENMASK() when appropriateMarcus Folkesson1-2/+2
GENMASK() is preferred to use for bitmasks. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Link: https://lore.kernel.org/r/20221014081620.1599511-1-marcus.folkesson@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-08-17thermal/drivers/imx: Switch to new of APIDaniel Lezcano1-7/+7
The thermal OF code has a new API allowing to migrate the OF initialization to a simpler approach. The ops are no longer device tree specific and are the generic ones provided by the core code. Convert the ops to the thermal_zone_device_ops format and use the new API to register the thermal zone with these generic ops. Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org> Link: https://lore.kernel.org/r/20220804224349.1926752-17-daniel.lezcano@linexp.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-12-02thermal/drivers/imx8mm: Enable ADC when enabling monitorPaul Gerber1-0/+3
The i.MX 8MP has a ADC_PD bit in the TMU_TER register that controls the operating mode of the ADC: * 0 means normal operating mode * 1 means power down mode When enabling/disabling the TMU, the ADC operating mode must be set accordingly. i.MX 8M Mini & Nano are lacking this bit. Signed-off-by: Paul Gerber <Paul.Gerber@tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Fixes: 2b8f1f0337c5 ("thermal: imx8mm: Add i.MX8MP support") Link: https://lore.kernel.org/r/20211122114225.196280-1-alexander.stein@ew.tq-group.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2020-12-04thermal: imx8mm: Disable the clock on probe failureFabio Estevam1-1/+5
Prior to returning an error in probe, disable the previously enabled clock. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201202232448.2692-2-festevam@gmail.com
2020-12-04thermal: imx8mm: Print the correct error codeFabio Estevam1-1/+2
Currently the error message does not print the correct error code. Fix it by initializing 'ret' to the proper error code. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201202232448.2692-1-festevam@gmail.com
2020-10-12thermal: imx8mm: Use dev_err_probe() to simplify error handlingAnson Huang1-7/+3
dev_err_probe() can reduce code size, uniform error handling and record the defer probe reason etc., use it to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1597129185-8460-2-git-send-email-Anson.Huang@nxp.com
2020-07-21thermal: imx8mm: Support module autoloadingAnson Huang1-0/+1
Add a missing MODULE_DEVICE_TABLE entry to support module autoloading. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1592380074-19222-1-git-send-email-Anson.Huang@nxp.com
2020-05-22thermal: imx8mm: Replace zero-length array with flexible-arrayGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200507192517.GA16557@embeddedor
2020-03-23thermal: imx8mm: Fix build warning of incorrect argument typeAnson Huang1-4/+3
Fix below sparse warning: drivers/thermal/imx8mm_thermal.c:82:36: sparse: sparse: incorrect type in argument 2 (different address spaces), expected unsigned long const volatile *addr drivers/thermal/imx8mm_thermal.c:82:36: sparse: expected unsigned long const volatile *addr Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1584973156-25734-1-git-send-email-Anson.Huang@nxp.com
2020-03-23thermal: imx8mm: Add i.MX8MP supportAnson Huang1-24/+130
i.MX8MP shares same TMU with i.MX8MM, the only difference is i.MX8MP has two thermal sensors while i.MX8MM ONLY has one, add multiple sensors support for i.MX8MM TMU driver. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1584674791-9717-2-git-send-email-Anson.Huang@nxp.com
2020-03-12thermal: imx8mm: Add support for i.MX8MM thermal monitoring unitAnson Huang1-0/+131
i.MX8MM has a thermal monitoring unit(TMU) inside, it ONLY has one sensor for CPU, add support for reading immediate temperature of this sensor. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1582947862-11073-2-git-send-email-Anson.Huang@nxp.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-26 21:57:25 +0300