summaryrefslogtreecommitdiff
path: root/drivers/usb/dwc2
AgeCommit message (Collapse)AuthorFilesLines
2022-12-08usb: dwc2: power on/off phy for peripheral mode in dual-role modeQuentin Schulz2-3/+6
The PHY power is handled for peripheral mode but only when the device is forced into this peripheral mode. It is missing when the device is operating in peripheral mode when dual-role mode is enabled, so let's update the condition to match this scenario. Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20221206-dwc2-gadget-dual-role-v1-2-36515e1092cd@theobroma-systems.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-08usb: dwc2: disable lpm feature on Rockchip SoCsQuentin Schulz1-0/+4
LPM feature of DWC2 module integrated in Rockchip SoCs doesn't work properly or needs some additional handling, so disable it for now. Without disabling LPM feature, the USB ADB communication fail with the following error log: dwc2 ff580000.usb: new address 27 dwc2 ff580000.usb: Failed to exit L1 sleep state in 200us. dwc2 ff580000.usb: dwc2_hsotg_send_reply: cannot queue req dwc2 ff580000.usb: dwc2_hsotg_process_req_status: failed to send reply dwc2 ff580000.usb: dwc2_hsotg_enqueue_setup: failed queue (-11) dwc2 ff580000.usb: Failed to exit L1 sleep state in 200us. [diff vs vendor kernel: added lpm_clock_gating, besl and hird_threshold_en settings as seen in commit 53febc956900 ("usb: dwc2: disable Link Power Management on STM32MP15 HS OTG")] Signed-off-by: William Wu <william.wu@rock-chips.com> Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20221206-dwc2-gadget-dual-role-v1-1-36515e1092cd@theobroma-systems.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-22usb: dwc2: platform: Improve error reporting for problems during .remove()Uwe Kleine-König1-1/+1
Returning an error value in a platform driver's remove callback results in a generic error message being emitted by the driver core, but otherwise it doesn't make a difference. The device goes away anyhow. For each case where ret is non-zero the driver already emits an error message, so suppress the generic error message by returning zero unconditionally. (Side note: The return value handling was unreliable anyhow as the value returned by dwc2_exit_hibernation() was overwritten anyhow if hsotg->in_ppd was non-zero.) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Link: https://lore.kernel.org/r/20221017195914.1426297-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: dwc2: Remove redundant license textChristophe JAILLET12-360/+1
SPDX-License-Identifier have been added in commit 5fd54ace4721 ("USB: add SPDX identifiers to all remaining files in drivers/usb/") There is no point in keeping the now redundant license text. Remove it. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/030a7e187d707f8734a492cda7a6b54d459c4bb3.1662788747.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30usb: dwc2: fix wrong order of phy_power_on and phy_initHeiner Kallweit1-4/+4
Since 1599069a62c6 ("phy: core: Warn when phy_power_on is called before phy_init") the driver complains. In my case (Amlogic SoC) the warning is: phy phy-fe03e000.phy.2: phy_power_on was called before phy_init So change the order of the two calls. The same change has to be done to the order of phy_exit() and phy_power_off(). Fixes: 09a75e857790 ("usb: dwc2: refactor common low-level hw code to platform.c") Cc: stable@vger.kernel.org Acked-by: Minas Harutyunyan <hminas@synopsys.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/dfcc6b40-2274-4e86-e73c-5c5e6aa3e046@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-24usb: dwc2: drop unexpected word "the" in the commentsJiang Jian1-1/+1
there is an unexpected word "the" in the comments that need to be dropped file: ./drivers/usb/dwc2/hcd.c line: 1002 * even and the current frame number is even the the transfer changed to: * even and the current frame number is even the transfer Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Link: https://lore.kernel.org/r/20220622103558.6647-1-jiangjian@cdjrlc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-24usb: dwc2: gadget: remove D+ pull-up while no vbus with usb-role-switchAmelie Delaunay1-1/+2
When using usb-role-switch, D+ pull-up is set as soon as DTCL_SFTDISCON is cleared, whatever the vbus valid signal state is. The pull-up should not be set when vbus isn't present (this is determined by the drd controller). This patch ensures that B-Session (so Peripheral role + vbus valid signal) is valid before clearing the DCTL_SFTDISCON bit when role switch is used. Keep original behavior when usb-role-switch isn't used. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20220622160717.314580-1-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-22usb: dwc2: host: add TPL supportAmelie Delaunay1-0/+3
The Target Peripheral List (TPL) is used to identify targeted devices during Embedded Host compliance testing. The user can add "tpl-support" in the device tree to enable it. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Link: https://lore.kernel.org/r/20220621152350.145745-5-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10usb: dwc2: Fix memory leak in dwc2_hcd_initMiaoqian Lin1-1/+1
usb_create_hcd will alloc memory for hcd, and we should call usb_put_hcd to free it when platform_get_resource() fails to prevent memory leak. goto error2 label instead error1 to fix this. Fixes: 856e6e8e0f93 ("usb: dwc2: check return value after calling platform_get_resource()") Cc: stable <stable@kernel.org> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220530085413.44068-1-linmq006@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05usb: dwc2: gadget: don't reset gadget's driver->busMarek Szyprowski1-1/+0
UDC driver should not touch gadget's driver internals, especially it should not reset driver->bus. This wasn't harmful so far, but since commit fc274c1e9973 ("USB: gadget: Add a new bus for gadgets") gadget subsystem got it's own bus and messing with ->bus triggers the following NULL pointer dereference: dwc2 12480000.hsotg: bound driver g_ether 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: ... CPU: 0 PID: 620 Comm: modprobe Not tainted 5.18.0-rc5-next-20220504 #11862 Hardware name: Samsung Exynos (Flattened Device Tree) PC is at module_add_driver+0x44/0xe8 LR is at sysfs_do_create_link_sd+0x84/0xe0 ... Process modprobe (pid: 620, stack limit = 0x(ptrval)) ... module_add_driver from bus_add_driver+0xf4/0x1e4 bus_add_driver from driver_register+0x78/0x10c driver_register from usb_gadget_register_driver_owner+0x40/0xb4 usb_gadget_register_driver_owner from do_one_initcall+0x44/0x1e0 do_one_initcall from do_init_module+0x44/0x1c8 do_init_module from load_module+0x19b8/0x1b9c load_module from sys_finit_module+0xdc/0xfc sys_finit_module from ret_fast_syscall+0x0/0x54 Exception stack(0xf1771fa8 to 0xf1771ff0) ... dwc2 12480000.hsotg: new device is high-speed ---[ end trace 0000000000000000 ]--- Fix this by removing driver->bus entry reset. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20220505104618.22729-1-m.szyprowski@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21USB: dwc2: Add OTG support for Ingenic SoCs.周琰杰 (Zhou Yanjie)3-1/+63
Add OTG support for the JZ4775 SoC, the JZ4780 SoC, the X1000 SoC, the X1600 SoC, the X1700 SoC, the X1830 SoC, and the X2000 SoC from Ingenic. Introduce support for disable Ingenic overcurrent detection, once selected, it enables the GOTGCTL register bits VbvalidOvEn and VbvalidOvVal to disable the VBUS overcurrent detection. This patch is derived from Dragan Čečavac (in the kernel 3.18.3 tree of CI20). It is very useful for the MIPS Creator CI20 (r1). Without this patch, OTG port of CI20 has a great probability to face overcurrent warning, which breaks the OTG functionality. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Dragan Čečavac <dragancecavac@yahoo.com> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/1649964337-114337-3-git-send-email-zhouyanjie@wanyeetech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-28Merge 5.17-rc6 into usb-nextGreg Kroah-Hartman2-2/+6
We need the USB fixes in here, and it resolves a merge conflict in: drivers/usb/dwc3/dwc3-pci.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-17usb: dwc2: drd: fix soft connect when gadget is unconfiguredFabrice Gasnier2-2/+6
When the gadget driver hasn't been (yet) configured, and the cable is connected to a HOST, the SFTDISCON gets cleared unconditionally, so the HOST tries to enumerate it. At the host side, this can result in a stuck USB port or worse. When getting lucky, some dmesg can be observed at the host side: new high-speed USB device number ... device descriptor read/64, error -110 Fix it in drd, by checking the enabled flag before calling dwc2_hsotg_core_connect(). It will be called later, once configured, by the normal flow: - udc_bind_to_driver - usb_gadget_connect - dwc2_hsotg_pullup - dwc2_hsotg_core_connect Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support") Cc: stable <stable@vger.kernel.org> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/1644999135-13478-1-git-send-email-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-11usb: dwc2: Add platform specific data for Intel's AgilexDinh Nguyen1-0/+10
The DWC2 IP on the Agilex platform does not support clock-gating. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20220125161821.1951906-2-dinguyen@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: dwc2: gadget: don't try to disable ep0 in dwc2_hsotg_suspendAmelie Delaunay1-1/+1
Calling dwc2_hsotg_ep_disable on ep0 (in/out) will lead to the following logs before returning -EINVAL: dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called for ep0 dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called for ep0 To avoid these two logs while suspending, start disabling the endpoint from the index 1, as done in dwc2_hsotg_udc_stop: /* all endpoints should be shutdown */ for (ep = 1; ep < hsotg->num_of_eps; ep++) { if (hsotg->eps_in[ep]) dwc2_hsotg_ep_disable_lock(&hsotg->eps_in[ep]->ep); if (hsotg->eps_out[ep]) dwc2_hsotg_ep_disable_lock(&hsotg->eps_out[ep]->ep); } Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211207130101.270314-1-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-06usb: dwc2: gadget: initialize max_speed from paramsJohn Keeping1-1/+12
DWC2 may be paired with a full-speed PHY which is not capable of high-speed operation. Report this correctly to the gadget core by setting max_speed from the core parameters. Prior to commit 5324bad66f09f ("usb: dwc2: gadget: implement udc_set_speed()") this didn't cause the hardware to be configured incorrectly, although the speed may have been reported incorrectly. But after that commit params.speed is updated based on a value passed in by the gadget core which may set it to a faster speed than is supported by the hardware. Initialising the max_speed parameter ensures the speed passed to dwc2_gadget_set_speed() will be one supported by the hardware. Fixes: 5324bad66f09f ("usb: dwc2: gadget: implement udc_set_speed()") Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: John Keeping <john@metanate.com> Link: https://lore.kernel.org/r/20220106115731.1473909-1-john@metanate.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-06usb: dwc2: do not gate off the hardware if it does not support clock gatingDinh Nguyen1-3/+4
We should not be clearing the HCD_FLAG_HW_ACCESSIBLE bit if the hardware does not support clock gating. Fixes: 50fb0c128b6e ("usb: dwc2: Add clock gating entering flow by system suspend") Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20220104135922.734776-1-dinguyen@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-30usb: dwc2: Simplify a bitmap declarationChristophe JAILLET1-2/+1
Use DECLARE_BITMAP() instead of hand writing it. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/a2bf604d26dbe9816fdaae0faf4b4837ecacc6d3.1640245180.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20Merge 5.16-rc6 into usb-nextGreg Kroah-Hartman1-0/+3
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-17usb: dwc2: drd: restore role and overrides upon resumeFabrice Gasnier2-6/+42
Override enable bits may not be restored when going to low power mode (e.g. when in DWC2_POWER_DOWN_PARAM_NONE). These bits are set when probing/initializing drd (role switch). Restore them upon resume from low power mode (in case these have been lost). To achieve this, the last known role is restored upon resume. And the override enable bits are always set when configuring aval, bval and vbval. When resuming, forcing the role should be done only once, or this can cause port changes in HOST mode for instance. So, only restore FORCEDEVMODE/FORCEHOSTMODE when role_sw is unused Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/1638806203-6624-4-git-send-email-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-17usb: dwc2: drd: add role-switch-default-node supportFabrice Gasnier2-0/+16
When using usb-role-switch, while the usb role is not yet define (USB_ROLE_NONE), the user may want to configure the default mode to host or device. Use role-switch-default-mode for that purpose. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/1638806203-6624-3-git-send-email-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-16usb: dwc2: platform: adopt dev_err_probe() to silent probe deferAmelie Delaunay1-37/+16
In case of probe defer, a message is logged for resets and clocks. Use dev_err_probe to log the message only when error code is not -517. Simplify phy, regulators and drd probe defer handling with dev_err_probe(). Then, take benefit of devices_deferred debugfs in case of probe deferral. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211207120829.266837-1-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-15usb: dwc2: fix STM ID/VBUS detection startup delay in dwc2_driver_probeAmelie Delaunay1-0/+3
When activate_stm_id_vb_detection is enabled, ID and Vbus detection relies on sensing comparators. This detection needs time to stabilize. A delay was already applied in dwc2_resume() when reactivating the detection, but it wasn't done in dwc2_probe(). This patch adds delay after enabling STM ID/VBUS detection. Then, ID state is good when initializing gadget and host, and avoid to get a wrong Connector ID Status Change interrupt. Fixes: a415083a11cc ("usb: dwc2: add support for STM32MP15 SoCs USB OTG HS and FS") Cc: stable <stable@vger.kernel.org> Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211207124510.268841-1-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-29Merge 5.16-rc3 into usb-nextGreg Kroah-Hartman2-4/+15
We need the USB driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-23usb: dwc2: gadget: use existing helperJohn Keeping1-2/+2
All other checks of params.g_dma_desc in this file use the using_desc_dma() helper function. Use that helper in two more places for consistency throughout the file. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: John Keeping <john@metanate.com> Link: https://lore.kernel.org/r/20211122123107.3147353-1-john@metanate.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17usb: dwc2: hcd_queue: Fix use of floating point literalNathan Chancellor1-1/+1
A new commit in LLVM causes an error on the use of 'long double' when '-mno-x87' is used, which the kernel does through an alias, '-mno-80387' (see the LLVM commit below for more details around why it does this). drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY); ^ drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY' #define DWC2_RETRY_WAIT_DELAY (1 * 1E6L) ^ 1 error generated. This happens due to the use of a 'long double' literal. The 'E6' part of '1E6L' causes the literal to be a 'double' then the 'L' suffix promotes it to 'long double'. There is no visible reason for a floating point value in this driver, as the value is only used as a parameter to a function that expects an integer type. Use NSEC_PER_MSEC, which is the same integer value as '1E6L', to avoid changing functionality but fix the error. Link: https://github.com/ClangBuiltLinux/linux/issues/1497 Link: https://github.com/llvm/llvm-project/commit/a8083d42b1c346e21623a1d36d1f0cadd7801d83 Fixes: 6ed30a7d8ec2 ("usb: dwc2: host: use hrtimer for NAK retries") Cc: stable <stable@vger.kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: John Keeping <john@metanate.com> Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20211105145802.2520658-1-nathan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17usb: dwc2: gadget: Fix ISOC flow for elapsed framesMinas Harutyunyan1-3/+14
Added updating of request frame number for elapsed frames, otherwise frame number will remain as previous use of request. This will allow function driver to correctly track frames in case of Missed ISOC occurs. Added setting request actual length to 0 for elapsed frames. In Slave mode when pushing data to RxFIFO by dwords, request actual length incrementing accordingly. But before whole packet will be pushed into RxFIFO and send to host can occurs Missed ISOC and data will not send to host. So, in this case request actual length should be reset to 0. Fixes: 91bb163e1e4f ("usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave") Cc: stable <stable@vger.kernel.org> Reviewed-by: John Keeping <john@metanate.com> Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/c356baade6e9716d312d43df08d53ae557cb8037.1636011277.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-25usb: dwc2: stm32mp15: set otg_revFabrice Gasnier1-0/+2
STM32MP15 complies with the OTG 2.0. Set OTG revision accordingly. It is useful for the of_usb_update_otg_caps() routine to check and update otg_rev to the lower value between DT and provided params. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/1634133425-25670-5-git-send-email-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-25usb: dwc2: add otg_rev and otg_caps information for gadget driverFabrice Gasnier5-52/+57
Currently the dwc2 doesn't fill in the 'otg_caps' of usb_gadget structure. When registering a gadget device (e.g. via configfs), the usb_otg_descriptor_init() checks the 'otg_caps' and 'otg_rev'. It defaults to HNP and SRP bmAttributes if unspecified. There may be a mismatch with what's being set in dwc2 params structure. This result in the descriptors to be miss-configured in this case. So replace 'otg_cap' bit field by 'otg_caps' structure, so hnp, srp and otg_rev' can be configured directly in the params. It's then provided to the gadget struct. These parameters can be tuned for each platform. In case it's not set, it will default to current behavior. Also add option to setup these from the device tree by calling of_usb_update_otg_caps(). This provides support for standard properties such as "otg-rev", "hnp-disable" and "srp-disable" (see usb-drd.yaml). Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/1634133425-25670-4-git-send-email-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-21usb: dwc2: drd: reset current session before setting the new oneAmelie Delaunay1-0/+2
If role is changed without the "none" step, A- and B- valid session could be set at the same time. It is an issue. This patch resets A-session if role switch sets B-session, and resets B-session if role switch sets A-session. Then, it is possible to change the role without the "none" step. Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support") Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211005095305.66397-4-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-21usb: dwc2: drd: fix dwc2_drd_role_sw_set when clock could be disabledAmelie Delaunay1-0/+18
In case of USB_DR_MODE_PERIPHERAL, the OTG clock is disabled at the end of the probe (it is not the case if USB_DR_MODE_HOST or USB_DR_MODE_OTG). The clock is then enabled on udc_start. If dwc2_drd_role_sw_set is called before udc_start (it is the case if the usb cable is plugged at boot), GOTGCTL and GUSBCFG registers cannot be read/written, so session cannot be overridden. To avoid this case, check the ll_hw_enabled value and enable the clock if it is available, and disable it after the override. Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support") Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211005095305.66397-3-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-21usb: dwc2: drd: fix dwc2_force_mode call in dwc2_ovr_initAmelie Delaunay1-2/+2
Instead of forcing the role to Device, check the dr_mode configuration. If the core is Host only, force the mode to Host, this to avoid the dwc2_force_mode warning: WARNING: CPU: 1 PID: 21 at drivers/usb/dwc2/core.c:615 dwc2_drd_init+0x104/0x17c When forcing mode to Host, dwc2_force_mode may sleep the time the host role is applied. To avoid sleeping while atomic context, move the call to dwc2_force_mode after spin_unlock_irqrestore. It is safe, as interrupts are not yet unmasked here. Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support") Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211005095305.66397-2-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14usb: dwc2: gadget: Fix ISOC transfer complete handling for DDMAMinas Harutyunyan1-3/+1
When last descriptor in a descriptor list completed with XferComplete interrupt, core switching to handle next descriptor and assert BNA interrupt. Both these interrupts are set while dwc2_hsotg_epint() handler called. Each interrupt should be handled separately: first XferComplete interrupt then BNA interrupt, otherwise last completed transfer will not be giveback to function driver as completed request. Fixes: 729cac693eec ("usb: dwc2: Change ISOC DDMA flow") Cc: stable <stable@vger.kernel.org> Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/a36981accc26cd674c5d8f8da6164344b94ec1fe.1631386531.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14usb: dwc2: gadget: Fix ISOC flow for BDMA and SlaveMinas Harutyunyan1-83/+106
According USB spec each ISOC transaction should be performed in a designated for that transaction interval. On bus errors or delays in operating system scheduling of client software can result in no packet being transferred for a (micro)frame. An error indication should be returned as status to the client software in such a case. Current implementation in case of missed/dropped interval send same data in next possible interval instead of reporting missed isoc. This fix complete requests with -ENODATA if interval elapsed. HSOTG core in BDMA and Slave modes haven't HW support for (micro)frames tracking, this is why SW should care about tracking of (micro)frames. Because of that method and consider operating system scheduling delays, added few additional checking's of elapsed target (micro)frame: 1. Immediately before enabling EP to start transfer. 2. With any transfer completion interrupt. 3. With incomplete isoc in/out interrupt. 4. With EP disabled interrupt because of incomplete transfer. 5. With OUT token received while EP disabled interrupt (for OUT transfers). 6. With NAK replied to IN token interrupt (for IN transfers). As part of ISOC flow, additionally fixed 'current' and 'target' frame calculation functions. In HS mode SOF limits provided by DSTS register is 0x3fff, but in non HS mode this limit is 0x7ff. Tested by internal tool which also using for dwc3 testing. Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/95d1423adf4b0f68187c9894820c4b7e964a3f7f.1631175721.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14usb: dwc2: check return value after calling platform_get_resource()Yang Yingliang1-0/+4
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210831084236.1359677-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-27usb: dwc2: Fix spelling mistake "was't" -> "wasn't"Colin Ian King1-1/+1
There is a spelling mistake in a dev_dbg message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210826143849.55115-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-13usb: dwc2: gadget: implement udc_set_speed()Argishti Aleksanyan1-0/+23
Implemented udc_set_speed() gadget ops to allow the udc to select the gadget speed on initialization. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Argishti Aleksanyan <aleksan@synopsys.com> Link: https://lore.kernel.org/r/c453469d618100321c876a8c2b0ebee15a456eac.1628583235.git.aleksan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-26Merge v5.14-rc3 into usb-nextGreg Kroah-Hartman5-7/+38
We need the fixes in here, and this resolves a merge issue with drivers/usb/dwc3/gadget.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: dwc2: gadget: Add endpoint wedge supportMinas Harutyunyan2-1/+29
Add enpoint wedge support. Tested by USBCV MSC tests. Signed-off-by: Argishti Aleksanyan <Argishti.Aleksanyan@synopsys.com> Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/3143ea6b8eee08761709a6c2788216292be46a34.1626087390.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: dwc2: gadget: Fix sending zero length packet in DDMA mode.Minas Harutyunyan1-4/+6
Sending zero length packet in DDMA mode perform by DMA descriptor by setting SP (short packet) flag. For DDMA in function dwc2_hsotg_complete_in() does not need to send zlp. Tested by USBCV MSC tests. Fixes: f71b5e2533de ("usb: dwc2: gadget: fix zero length packet transfers") Cc: stable <stable@vger.kernel.org> Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/967bad78c55dd2db1c19714eee3d0a17cf99d74a.1626777738.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: dwc2: Skip clock gating on Samsung SoCsMarek Szyprowski4-3/+11
Commit 0112b7ce68ea ("usb: dwc2: Update dwc2_handle_usb_suspend_intr function.") changed the way the driver handles power down modes in a such way that it uses clock gating when no other power down mode is available. This however doesn't work well on the DWC2 implementation used on the Samsung SoCs. When a clock gating is enabled, system hangs. It looks that the proper clock gating requires some additional glue code in the shared USB2 PHY and/or Samsung glue code for the DWC2. To restore driver operation on the Samsung SoCs simply skip enabling clock gating mode until one finds what is really needed to make it working reliably. Fixes: 0112b7ce68ea ("usb: dwc2: Update dwc2_handle_usb_suspend_intr function.") Cc: stable <stable@vger.kernel.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20210716050127.4406-1-m.szyprowski@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: dwc2: gadget: Fix GOUTNAK flow for Slave mode.Minas Harutyunyan1-0/+21
Because of dwc2_hsotg_ep_stop_xfr() function uses poll mode, first need to mask GINTSTS_GOUTNAKEFF interrupt. In Slave mode GINTSTS_GOUTNAKEFF interrupt will be aserted only after pop OUT NAK status packet from RxFIFO. In dwc2_hsotg_ep_sethalt() function before setting DCTL_SGOUTNAK need to unmask GOUTNAKEFF interrupt. Tested by USBCV CH9 and MSC tests set in Slave, BDMA and DDMA. All tests are passed. Fixes: a4f827714539a ("usb: dwc2: gadget: Disable enabled HW endpoint in dwc2_hsotg_ep_disable") Fixes: 6070636c4918c ("usb: dwc2: Fix Stalling a Non-Isochronous OUT EP") Cc: stable <stable@vger.kernel.org> Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/e17fad802bbcaf879e1ed6745030993abb93baf8.1626152924.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09usb: dwc2: Don't reset the core after setting turnaround timeClément Lassieur1-9/+21
Every time the hub signals a reset while we (device) are hsotg->connected, dwc2_hsotg_core_init_disconnected() is called, which in turn calls dwc2_hs_phy_init(). GUSBCFG.USBTrdTim is cleared upon Core Soft Reset, so if hsotg->params.phy_utmi_width is 8-bit, the value of GUSBCFG.USBTrdTim (the default one: 0x5, corresponding to 16-bit) is always different from hsotg->params.phy_utmi_width, thus dwc2_core_reset() is called every time (usbcfg != usbcfg_old), which causes 2 issues: 1) The call to dwc2_core_reset() does another reset 300us after the initial Chirp K of the first reset (which should last at least Tuch = 1ms), and messes up the High-speed Detection Handshake: both hub and device drive current into the D+ and D- lines at the same time. 2) GUSBCFG.USBTrdTim is cleared by the second reset, so its value is always the default one (0x5). Setting GUSBCFG.USBTrdTim after the potential call to dwc2_core_reset() fixes both issues. It is now set even when select_phy is false because the cost of the Core Soft Reset is removed. Fixes: 1e868545f2bb ("usb: dwc2: gadget: Move gadget phy init into core phy init") Signed-off-by: Clément Lassieur <clement@lassieur.org> Link: https://lore.kernel.org/r/20210603155921.940651-1-clement@lassieur.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27usb: dwc2: gadget: Repair 'dwc2_hsotg_core_init_disconnected()'s documentationLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/usb/dwc2/gadget.c:3349: warning: expecting prototype for dwc2_hsotg_core_init(). Prototype was for dwc2_hsotg_core_init_disconnected() instead Cc: Minas Harutyunyan <hminas@synopsys.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ben Dooks <ben@simtec.co.uk> Cc: linux-usb@vger.kernel.org Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210526130037.856068-16-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27usb: dwc2: pci: Fix possible copy/paste issueLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/usb/dwc2/pci.c:73: warning: expecting prototype for dwc2_pci_probe(). Prototype was for dwc2_pci_remove() instead Cc: Minas Harutyunyan <hminas@synopsys.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210526130037.856068-13-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27usb: dwc2: hcd_queue: Fix typeo in function name 'dwc2_hs_pmap_unschedule()'Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/usb/dwc2/hcd_queue.c:686: warning: expecting prototype for dwc2_ls_pmap_unschedule(). Prototype was for dwc2_hs_pmap_unschedule() instead Cc: Minas Harutyunyan <hminas@synopsys.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210526130037.856068-12-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27usb: dwc2: params: Fix naming of 'dwc2_get_hwparams()' in the docsLee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/usb/dwc2/params.c:787: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Minas Harutyunyan <hminas@synopsys.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210526130037.856068-6-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27usb: dwc2: platform: Provide function name for 'dwc2_check_core_version()'Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/usb/dwc2/platform.c:411: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Minas Harutyunyan <hminas@synopsys.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Matthijs Kooijman <matthijs@stdin.nl> Cc: linux-usb@vger.kernel.org Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210526130037.856068-3-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-21USB: dwc2: drop irq-flags initialisationsJohan Hovold1-6/+6
There's no need to initialise irq-flags variables before saving the interrupt state. While at it drop two redundant return-value initialisations from two of the functions that got it wrong. Cc: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210519093303.10789-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: dwc2: Remove obsolete MODULE_ constants from platform.cMatthijs Kooijman1-4/+0
Originally, the core and platform drivers were separate modules, so each had its own module info. Since commit 2d1165a4b95e (usb: dwc2: remove dwc2_platform.ko) platform.c is included in the core module, which now contains duplicate module info (from core.c and platform.c). Due to the linking order and modinfo implementation, running `modinfo` on the resulting dwc2.ko shows just the info from platform.c, rather than that from core.c, suggesting that I am the author of the entire dwc2 module. Since platform.c is just a minor part of the entire module, this removes its module info in favor of the info from core.c. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Link: https://lore.kernel.org/r/20210503180538.64423-1-matthijs@stdin.nl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-03 22:05:04 +0300