summaryrefslogtreecommitdiff
path: root/drivers/usb/gadget/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-30usb: gadget: use $(srctree) instead of $(PWD) for includesYegor Yefremov1-1/+1
Using $(PWD) breaks builds when make was invoked from outside of the kernel tree. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-16usb: gadget: Gadget directory cleanup - group usb functionsAndrzej Pietrasiewicz1-29/+1
The drivers/usb/gadget directory contains many files. Files which are related can be distributed into separate directories. This patch moves the USB functions implementations into a separate directory. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-16usb: gadget: Gadget directory cleanup - group UDC driversAndrzej Pietrasiewicz1-29/+2
The drivers/usb/gadget directory contains many files. Files which are related can be distributed into separate directories. This patch moves the UDC drivers into a separate directory. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-16usb: gadget: Gadget directory cleanup - group legacy gadgetsAndrzej Pietrasiewicz1-41/+3
The drivers/usb/gadget directory contains many files. Files which are related can be distributed into separate directories. This patch moves the legacy gadgets (i.e. those not using configfs) into a separate directory. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-25usb: dwc2/s3c-hsotg: move s3c-hsotg into dwc2 directoryDinh Nguyen1-1/+0
Moves the s3c-hsotg driver into the dwc2 directory and uses the dwc2 defines in hw.h. Renames s3c-hsotg.c to gadget.c. NOTE: You can build both host and peripheral as a dynamically linked module, but be aware that if you insmod dwc2_gadget, then rmmod it, then insmod dwc2 and dwc2_platform for host mode, this will not work. As the step to rmmod dwc2_gadget.ko will turn off the clock to the USB IP. The dwc2 host driver currently does not look to turn on a clock yet. A patch to fix that will be coming soon. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> [ jh,rb - For gadget part only: ] Tested-by: Jingoo Han <jg1.han@samsung.com> Tested-by: Robert Baldyga <r.baldyga@samsung.com> [ pz: Folded Kconfig/Makefile changes, which were originally in a separate patch, into this one, to avoid a build breakage. Modified Kconfig/Makefile changes a bit. Tested host part only. ] Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-24usb: gadget: Add UDC driver for Aeroflex Gaisler GRUSBDCAndreas Larsson1-0/+1
This adds an UDC driver for GRUSBDC USB Device Controller cores available in the GRLIB VHDL IP core library. The driver only supports DMA mode. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-12usb: gadget: FunctionFS: convert to new function interface with backward ↵Andrzej Pietrasiewicz1-0/+2
compatibility This is required in order to integrate configfs support. f_fs needs to be a separately compiled module and so it needs to use the new interface. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-12usb: gadget: rndis: merge u_rndis.ko with usb_f_rndis.koAndrzej Pietrasiewicz1-3/+1
The rndis function's users use only the new interface, so the two modules can be merged. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-11-26usb: gadget: factor out alloc_ep_reqAndrzej Pietrasiewicz1-1/+1
alloc_ep_req() is a function repeated in several modules. Make a common implementation and use it. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-11usb: gadget: Make VERBOSE_DEBUG enableable via KconfigAndreas Larsson1-1/+2
Create a way for VERBOSE_DEBUG to be enabled during drivers/usb/gadget/ build. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: gadget: mass_storage: merge usb_f_mass_storage module with u_ms moduleAndrzej Pietrasiewicz1-3/+1
u_ms.ko is needed only together with usb_f_mass_storage.ko. Merge them. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: gadget: f_mass_storage: convert to new function interface with backward ↵Andrzej Pietrasiewicz1-0/+2
compatibility Converting mass storage to the new function interface requires converting the USB mass storage's function code and its users. This patch converts the f_mass_storage.c to the new function interface. The file is now compiled into a separate usb_f_mass_storage.ko module. The old function interface is provided by means of a preprocessor conditional directives. After all users are converted, the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-01usb: gadget: create a utility module for mass_storageAndrzej Pietrasiewicz1-0/+2
Converting to configfs requires making the f_mass_storage.c a module. But first we need to get rid of "#include "storage_common.c". This patch makes storage_common.c a separately compiled file, which is built as a utility module named u_ms.ko. After all mass storage users are converted to the new function interface this module can be eliminated by merging it with the mass storage function's module. USB descriptors are exported so that they can be accessed from f_mass_storage. FSG_VENDOR_ID and FSG_PRODUCT_ID are moved to their only user. Handling of CONFIG_USB_GADGET_DEBUG_FILES is moved to f_mass_storage.c. The fsg_num_buffers static is moved to FSG_MODULE_PARAMETER users, so instead of using a global variable the f_mass_storage introduces fsg_num_buffers member in fsg_common (and fsg_config). fsg_strings and fsg_stringtab are moved to f_mass_storage.c. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: gadget: remove imx_udcFelipe Balbi1-1/+0
That driver hasn't been really maintained for a long time. It doesn't compile in any way, it includes non-existent headers, has no users, and is just plain broken. The person who used to work with that driver has publicly stated that he has no plans to touch that driver again and is ok with removal[1]. Due to these factors, imx_udc is now removed from the tree, if someone really believe it needs to be kept, please fix the bugs in that driver. [1] http://marc.info/?l=linux-usb&m=136197620417636&w=2 Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: add Faraday fotg210_udc driverYuan-Hsin Chen1-0/+1
Faraday fotg210 udc driver supports only Bulk transfer so far. fotg210 could be configured as an USB2.0 peripheral. This driver is tested with mass storage gadget driver on Faraday EVB a369. Signed-off-by: Yuan-Hsin Chen <yhchen@faraday-tech.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_rndis: convert to new function interface with backward ↵Andrzej Pietrasiewicz1-0/+2
compatibility Converting rndis to the new function interface requires converting the USB rndis' function code and its users. This patch converts the f_rndis.c to the new function interface. The file is now compiled into a separate usb_f_rndis.ko module. The old function interface is provided by means of a preprocessor conditional directives. After all users are converted, the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_subset: convert to new function interface with backward ↵Andrzej Pietrasiewicz1-0/+2
compatibility Converting ecm subset to the new function interface requires converting the USB subset's function code and its users. This patch converts the f_subset.c to the new function interface. The file is now compiled into a separate usb_f_subset.ko module. The old function interface is provided by means of a preprocessor conditional directives. After all users are converted, the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_eem: convert to new function interface with backward ↵Andrzej Pietrasiewicz1-0/+2
compatibility Converting eem to the new function interface requires converting the USB eem's function code and its users. This patch converts the f_eem.c to the new function interface. The file is now compiled into a separate usb_f_eem.ko module. The old function interface is provided by means of a preprocessor conditional directives. After all users are converted, the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_phonet: convert to new function interface with backward ↵Andrzej Pietrasiewicz1-0/+2
compatibility Converting f_phonet to the new function interface requires converting the f_phonet's function code and its users. This patch converts the f_phonet.c to the new function interface. The file is now compiled into a separate usb_f_phonet.ko module. The old function interface is provided by means of preprocessor conditional directives. After all users are converted, the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_ecm: convert to new function interface with backward ↵Andrzej Pietrasiewicz1-0/+2
compatibility Converting ecm to the new function interface requires converting the USB ecm's function code and its users. This patch converts the f_ecm.c to the new function interface. The file is now compiled into a separate usb_f_ecm.ko module. The old function interface is provided by means of a preprocessor conditional directives. After all users are converted, the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: f_ncm: convert to new function interface with backward ↵Andrzej Pietrasiewicz1-0/+2
compatibility Converting ncm to the new function interface requires converting the USB ncm's function code and its users. This patch converts the f_ncm.c to the new function interface. The file is now compiled into a separate usb_f_ncm.ko module. The old function interface is provided by means of a preprocessor conditional directives. After all users are converted, the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: rndis: convert into moduleAndrzej Pietrasiewicz1-0/+2
In order to convert to configfs the usb functions need to be converted to a new interface and compiled as modules. This patch creates an rndis module which will be used by the new functions. After all users of f_rndis are converted to the new interface, this module can be merged with f_rndis module. Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10usb: gadget: u_ether: convert into moduleAndrzej Pietrasiewicz1-0/+1
u_ether.c has been #include'd by all gadgets which implement USB Ethernet functions. In order to add configfs support, the f_ecm.c, f_eem.c, f_ncm.c, f_subset.c, f_rndis.c need to be converted into modules and must not be #include'd. Consequently, the u_ether.c needs to be a module too, in a manner similar to u_serial.c. The resulting module should not take any parameters, so they are pushed to the current users of it, that is ether.c, g_ffs.c, multi.c, ncm.c, nokia.c. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-03usb: gadget: f_obex: convert to new function interface with backward ↵Andrzej Pietrasiewicz1-0/+2
compatibility Converting f_obex to the new function interface requires converting the f_obex's function code and its users. This patch converts the f_obex.c to the new function interface. The file is now compiled into a separate usb_f_obex.ko module. The old function interface is provided by means of preprocessor conditional directives. After all users are converted, the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-03usb: gadget: f_serial: convert to new function interface with backward ↵Andrzej Pietrasiewicz1-0/+2
compatibility Converting f_serial to the new function interface requires converting the f_serial's function code and its users. This patch converts the f_serial.c to the new function interface. The file is now compiled into a separate usb_f_serial.ko module. The old function interface is provided by means of preprocessor conditional directives. After all users are converted, the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-03usb: gadget: use consistent naming scheme for usb function modulesAndrzej Pietrasiewicz1-3/+4
In order to convert to configfs the USB functions need to be converted to the new interface from Sebastian, which also requires turning them into separate modules. Some of these modules will consist of just one object file, e.g. f_ncm.o. But some of the modules will eventually consist of more than one object file, e.g. for mass storage there will be f_mass_storage.o and storage_common.o. The resulting module cannot be called f_mass_storage.ko due to cyclic dependency. This patch introduces a naming scheme for the said resulting modules: usb_f_xxxxxx.ko e.g. usb_f_mass_storage.ko, usb_f_ss_lb.ko, usb_f_rndis.ko etc. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-03usb: gadget: the start of the configfs interfaceSebastian Andrzej Siewior1-1/+1
|# modprobe dummy_hcd num=2 |# modprobe libcomposite |# lsmod |Module Size Used by |libcomposite 31648 0 |dummy_hcd 19871 0 |# mkdir /sys/kernel/config/usb_gadget/oha |# cd /sys/kernel/config/usb_gadget/oha |# mkdir configs/def.1 |# mkdir configs/def.2 |# mkdir functions/acm.ttyS1 |# mkdir strings/0x1 |mkdir: cannot create directory `strings/0x1': Invalid argument |# mkdir strings/0x409 |# mkdir strings/1033 |mkdir: cannot create directory `strings/1033': File exists |# mkdir strings/1032 |# mkdir configs/def.1/strings/0x409 |# mkdir configs/def.2/strings/0x409 |#find . -ls | 975 0 drwxr-xr-x 5 root root 0 Dec 23 17:40 . | 978 0 drwxr-xr-x 4 root root 0 Dec 23 17:43 ./strings | 4100 0 drwxr-xr-x 2 root root 0 Dec 23 17:43 ./strings/1032 | 995 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./strings/1032/serialnumber | 996 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./strings/1032/product | 997 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./strings/1032/manufacturer | 2002 0 drwxr-xr-x 2 root root 0 Dec 23 17:41 ./strings/0x409 | 998 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./strings/0x409/serialnumber | 999 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./strings/0x409/product | 1000 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./strings/0x409/manufacturer | 977 0 drwxr-xr-x 4 root root 0 Dec 23 17:41 ./configs | 4081 0 drwxr-xr-x 3 root root 0 Dec 23 17:41 ./configs/def.2 | 4082 0 drwxr-xr-x 3 root root 0 Dec 23 17:42 ./configs/def.2/strings | 2016 0 drwxr-xr-x 2 root root 0 Dec 23 17:42 ./configs/def.2/strings/0x409 | 1001 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./configs/def.2/strings/0x409/configuration | 1002 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./configs/def.2/bmAttributes | 1003 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./configs/def.2/MaxPower | 979 0 drwxr-xr-x 3 root root 0 Dec 23 17:42 ./configs/def.1 | 980 0 drwxr-xr-x 3 root root 0 Dec 23 17:42 ./configs/def.1/strings | 5122 0 drwxr-xr-x 2 root root 0 Dec 23 17:42 ./configs/def.1/strings/0x409 | 1004 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./configs/def.1/strings/0x409/configuration | 1005 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./configs/def.1/bmAttributes | 1006 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./configs/def.1/MaxPower | 976 0 drwxr-xr-x 3 root root 0 Dec 23 17:41 ./functions | 981 0 drwxr-xr-x 2 root root 0 Dec 23 17:41 ./functions/acm.ttyS1 | 1007 0 -r--r--r-- 1 root root 4096 Dec 23 17:43 ./functions/acm.ttyS1/port_num | 1008 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./UDC | 1009 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./bcdUSB | 1010 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./bcdDevice | 1011 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./idProduct | 1012 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./idVendor | 1013 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./bMaxPacketSize0 | 1014 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./bDeviceProtocol | 1015 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./bDeviceSubClass | 1016 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./bDeviceClass |# cat functions/acm.ttyS1/port_num |0 |# ls -lah /dev/ttyGS* |crw-rw---T 1 root dialout 252, 0 Dec 23 17:41 /dev/ttyGS0 | |# echo 0x1234 > idProduct |# echo 0xabcd > idVendor |# echo 1122 > strings/0x409/serialnumber |# echo "The manufacturer" > strings/0x409/manufacturer |# echo 1 > strings/1032/manufacturer |# echo 1sa > strings/1032/product |# echo tada > strings/1032/serialnumber |echo "Primary configuration" > configs/def.1/strings/0x409/configuration |# echo "Secondary configuration" > configs/def.2/strings/0x409/configuration |# ln -s functions/acm.ttyS1 configs/def.1/ |# ln -s functions/acm.ttyS1 configs/def.2/ |find configs/def.1/ -ls | 979 0 drwxr-xr-x 3 root root 0 Dec 23 17:49 configs/def.1/ | 6264 0 lrwxrwxrwx 1 root root 0 Dec 23 17:48 configs/def.1/acm.ttyS1 -> ../../../../usb_gadget/oha/functions/acm.ttyS1 | 980 0 drwxr-xr-x 3 root root 0 Dec 23 17:42 configs/def.1/strings | 5122 0 drwxr-xr-x 2 root root 0 Dec 23 17:49 configs/def.1/strings/0x409 | 6284 0 -rw-r--r-- 1 root root 4096 Dec 23 17:47 configs/def.1/strings/0x409/configuration | 6285 0 -rw-r--r-- 1 root root 4096 Dec 23 17:49 configs/def.1/bmAttributes | 6286 0 -rw-r--r-- 1 root root 4096 Dec 23 17:49 configs/def.1/MaxPower | |echo 120 > configs/def.1/MaxPower | |# ls -lh /sys/class/udc/ |total 0 |lrwxrwxrwx 1 root root 0 Dec 23 17:50 dummy_udc.0 -> ../../devices/platform/dummy_udc.0/udc/dummy_udc.0 |lrwxrwxrwx 1 root root 0 Dec 23 17:50 dummy_udc.1 -> ../../devices/platform/dummy_udc.1/udc/dummy_udc.1 |# echo dummy_udc.0 > UDC |# lsusb |Bus 001 Device 002: ID abcd:1234 Unknown | |lsusb -d abcd:1234 -v |Device Descriptor: … | idVendor 0xabcd Unknown | idProduct 0x1234 | bcdDevice 3.06 | iManufacturer 1 The manufacturer | iProduct 2 | iSerial 3 1122 | bNumConfigurations 2 … |echo "" > UDC v5…v6 - wired up strings with usb_gstrings_attach() - add UDC attribe. Write "udc-name" will bind the gadget. Write an empty string (it should contain \n since 0 bytes write get optimzed away) will unbind the UDC from the gadget. The name of available UDCs can be obtained from /sys/class/udc/ v4…v5 - string rework. This will add a strings folder incl. language code like strings/409/manufacturer as suggested by Alan. - rebased ontop reworked functions.c which has usb_function_instance which is used prior after "mkdir acm.instance" and can be directly used for configuration via configfs. v3…v4 - moved functions from the root folde down to the gadget as suggested by Michał - configs have now their own configs folder as suggested by Michał. The folder is still name.bConfigurationValue where name becomes the sConfiguration. Is this usefull should we just stilc configs/bConfigurationValue/ ? - added configfs support to the ACM function. The port_num attribute is exported by f_acm. An argument has been added to the USB alloc function to distinguish between "old" (use facm_configure() to configure and configfs interface (expose a config_node). The port_num is currently a dumb counter. It will require some function re-work to make it work. scheduled for v5: - sym linking function into config. v2…v3 - replaced one ifndef by ifdef as suggested by Micahał - strstr()/strchr() function_make as suggested by Micahł - replace [iSerialNumber|iProduct|iManufacturer] with [sSerialNumber|sProduct|sManufacturer] as suggested by Alan - added creation of config descriptors v1…v2 - moved gadgets from configfs' root directory into /udcs/ within our "usb_gadget" folder. Requested by Andrzej & Michał - use a dot as a delimiter between function's name and its instance's name as suggested by Michał - renamed all config_item_type, configfs_group_operations, make_group, drop_item as suggested by suggested by Andrzej to remain consisten within this file and within other configfs users - Since configfs.c and functions.c are now part of the udc-core module, the module itself is now called udc. Also added a tiny ifdef around init code becuase udc-core is subsys init and this is too early for configfs in the built-in case. In the module case, we can only have one init function. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-04usb: gadget: make usb functions to load before gadget driverKishon Vijay Abraham I1-6/+6
The current ordering in makefile makes gadget drivers be loaded before usb functions which causes usb_get_function_instance() to fail when gadget modules are statically linked to the kernel binary. Changed the ordering here so that USB functions are loaded before gadget drivers. Note that this is only a temporary solution and a more robust fix is needed in the long run. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-21usb: gadget: f_acm: convert to new function interface with backwards ↵Sebastian Andrzej Siewior1-0/+1
compatibility This patch converts f_acm into a module which uses the new function interface. It also converts one of its users that is g_serial to make use of it. The other users of it (g_nokia for instance) are still using the old include file system and should not notice the change at all. So they can be converter later independently. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-21usb: gadget: u_serial: convert into a moduleSebastian Andrzej Siewior1-0/+1
Every user of u_serial has now to select the U_SERIAL symbol instead of including the file. There is one limition with this: ports and and gs_tty_driver are global variables in u_serial. Since all users share them, there can be only one user loaded at a time i.e. either g_serial or g_nokia. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-21usb: gadget: convert source sink and loopback to new function interfaceSebastian Andrzej Siewior1-0/+4
This patch converts the f_sourcesink and f_loopback file to the USB-function module. Both functions shares a few common utility functions which are currently implemented in g_zero.c itself. This patch moves the common code into the sourcesink file and creates one module out of the the two functions (source sink and loop back). The g_zero gadget is function specific to source sink and loop back to set a few options. This Symbol dependency enforces a modul load right now. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-21usb: gadget: add some infracture to register/unregister functionsSebastian Andrzej Siewior1-1/+1
This patch provides an infrastructure to register & unregister a USB function. This allows to turn a function into a module and avoid the '#include "f_.*.c"' magic and we get a clear API / cut between the bare gadget and its functions. The concept is simple: Each function defines the DECLARE_USB_FUNCTION_INIT macro whith an unique name of the function and two allocation functions. - one to create an "instance". The instance holds the current configuration set. In case there are two usb_configudations with one function there will be one instance and two usb_functions - one to create an "function" from the instance. The name of the instance is used to automaticaly load the module if it the instance is not yet available. The usb_function callbacks are slightly modified and extended: - usb_get_function() creates a struct usb_function inclunding all pointers (bind, unbind,…). It uses the "instance" to map its configuration. So we can have _two_ struct usb_function, one for each usb_configuration. - ->unbind() Since the struct usb_function was not allocated in ->bind() it should not kfree()d here. This function should only reverse what happens in ->bind() that is request cleanup and the cleanup of allocated descriptors. - ->free_func() a simple kfree() of the struct usb_function Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-11-08usb: gadget: Remove File-backed Storage Gadget (g_file_storage).Michal Nazarewicz1-2/+0
The File-backed Storage Gadget (g_file_storage) gadget has been replaced with Mass Storage Gadget (g_mass_storage) which uses the composite framework. This commit removes g_file_storage (and most references to it). Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10usb: gadget: remove usb_gadget_controller_number()Sebastian Andrzej Siewior1-1/+1
The bcdDevice field is defined as |Device release number in binary-coded decimal in the USB 2.0 specification. We use this field to distinguish the UDCs from each other. In theory this could be used on the host side to apply certain quirks if the "special" UDC in combination with this gadget is used. This hasn't been done as far as I am aware. In practice it would be better to fix the UDC driver before shipping since a later release might not need this quirk anymore. There are some driver in tree (on the host side) which use the bcdDevice field to figure out special workarounds for a given firmware revision. This seems to make sense. Therefore this patch converts all gadgets (except a few) to use the kernel version instead a random 2 or 3 plus the UDC number. The few that don't report kernel's version are: - webcam This one reports always a version 0x10 so allow it to do so in future. - nokia This one reports always 0x211. The comment says that this gadget works only if the UDC supports altsettings so I added a check for this. - serial This one reports 0x2400 + UDC number. Since the gadget version is 2.4 this could make sense. Therefore bcdDevice is 0x2400 here. I also remove various gadget_is_<name> macros which are unused. The remaining few macros should be moved to feature / bug bitfield. Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10usb: gadget: libcomposite: move composite.c into libcompositeSebastian Andrzej Siewior1-1/+2
This moves composite.c into libcomposite and updates all gadgets. Finally! Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10usb: gadget: move usb_gadget_controller_number() into a .c file and libcompositeSebastian Andrzej Siewior1-1/+1
After I moved the function from the header file to the c file I see: | $ size drivers/usb/gadget/gadget_chips.o | text data bss dec hex filename | 1048 0 0 1048 418 drivers/usb/gadget/gadget_chips.o That is almost a KiB which is removed from each user. As Felipe pointed out, the function / usage is very dumb actually. This is used for the following reasons: - epautoconf ep hint (could provide a per-gadget callback) - miss-features. currently the missing altsetting on pxa's and something ZLP related on musbhdrc (looks like an optimisation which could be implemented in musb itself if it is correct) - unique BCD accross all UDCs. Not sure how important this is. Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10usb: gadget: libcomposite: add epautoconf.c to libcompositeSebastian Andrzej Siewior1-1/+1
This patch adds epautoconf.c into libcomposite and updates all gadgets. Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10usb: gadget: libcomposite: move config.c into libcompositeSebastian Andrzej Siewior1-1/+1
This patch moves config.c into libcomposite and updates all gadgets. Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10usb: gadget: start with libcompositeSebastian Andrzej Siewior1-0/+2
This patch aims to be simple. It removes #include usbstribgs.c line from each gadget and creates libcomposite.ko which has only one member, that is usbstribgs.c. Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-05usb: gadget: bcm63xx UDC driverKevin Cernekee1-0/+1
Driver for the "USB20D" / "USBD" block on BCM6328, BCM6368, BCM6816, BCM6362, BCM3383, and others. The hardware block was designed to support networking applications (direct connection of a home router to a PC), and the endpoint configuration is fixed. [ balbi@ti.com : dropped USB_GADGET_DUALSPEED from Kconfig ] Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-22usb: gadget: mv: Add USB 3.0 device driver for Marvell PXA2128 chip.Yu Xu1-0/+1
It supports Marvell USB 3.0 device controller for PXA2128 chip. Signed-off-by: Yu Xu <yuxu@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-05-23Merge tag 'usb-3.5-rc1' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB 3.5-rc1 changes from Greg Kroah-Hartman: "Here is the big USB 3.5-rc1 pull request for the 3.5-rc1 merge window. It's touches a lot of different parts of the kernel, all USB drivers, due to some API cleanups (getting rid of the ancient err() macro) and some changes that are needed for USB 3.0 power management updates. There are also lots of new drivers, pimarily gadget, but others as well. We deleted a staging driver, which was nice, and finally dropped the obsolete usbfs code, which will make Al happy to never have to touch that again. There were some build errors in the tree that linux-next found a few days ago, but those were fixed by the most recent changes (all were due to us not building with CONFIG_PM disabled.) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (477 commits) xhci: Fix DIV_ROUND_UP compile error. xhci: Fix compile with CONFIG_USB_SUSPEND=n USB: Fix core compile with CONFIG_USB_SUSPEND=n brcm80211: Fix compile error for .disable_hub_initiated_lpm. Revert "USB: EHCI: work around bug in the Philips ISP1562 controller" MAINTAINERS: Add myself as maintainer to the USB PHY Layer USB: EHCI: fix command register configuration lost problem USB: Remove races in devio.c USB: ehci-platform: remove update_device USB: Disable hub-initiated LPM for comms devices. xhci: Add Intel U1/U2 timeout policy. xhci: Add infrastructure for host-specific LPM policies. USB: Add macros for interrupt endpoint types. xhci: Reserve one command for USB3 LPM disable. xhci: Some Evaluate Context commands must succeed. USB: Disable USB 3.0 LPM in critical sections. USB: Add support to enable/disable USB3 link states. USB: Allow drivers to disable hub-initiated LPM. USB: Calculate USB 3.0 exit latencies for LPM. USB: Refactor code to set LPM support flag. ... Conflicts: arch/arm/mach-exynos/mach-nuri.c arch/arm/mach-exynos/mach-universal_c210.c drivers/net/wireless/ath/ath6kl/usb.c
2012-05-12usb: gadget: remove langwell_udcAlexander Shishkin1-1/+0
We have the chipidea driver now that supports both langwell and penwell, so there is no need for this one any more. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-12usb: move ci13xxx and related code to drivers/usb/chipideaAlexander Shishkin1-3/+0
Since chipidea is a dual role controller, it makes sense to move it to its own directory, where we can also have host, otg and platform code related to this controller. It also makes sense to break out the driver into several compilation units like udc, host, debugging code, etc. Firstly, let's move the udc and platform code to drivers/usb/chipidea. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-10usb-gadget: Initial merge of target module for UASP + BOTSebastian Andrzej Siewior1-0/+2
This fabric uses the target framework to provide a usb gadget device. This gadget supports the USB Attached SCSI Protocol (UASP) and Bulk Only Transfers (BOT or BBB). BOT is the primary interface, UAS is the alternative interface. It has been tested with dummy_hcd on HS and SS. On SS USB3 are supported. I also took my omap device and tried it there against WindowsXP. UAS implements basic command passing (i.e. read/write requests) and TASK MANAGEMENT functions are missing. I had to add a little of error recovery to BOT because Windows was issuing some strange commands and it does not complain after the gadget responded with CSW.status=1. (nab: Move to drivers/usb/gadget as per Sebastian to address legacy limitations for built-in gadget code) Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-10usb: gadget: ci13xxx: convert to platform deviceAlexander Shishkin1-0/+1
Let's break ci13xxx driver into a separate udc driver and platform drivers _pci and _msm, which will create a platform device for each pci (or msm) device found. The approach was introduced by Felipe in dwc3 driver and there seems to be no reason not to use it. msm related code is only compile-tested. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: gadget driver for LPC32xxRoland Stigge1-0/+1
This patch adds a USB gadget driver for the LPC32xx ARM SoC. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2011-12-20usb: gadget: mv_udc: drop ARCH dependencyNeil Zhang1-1/+1
This patch do the following things: 1. Change the Kconfig information. 2. Rename the driver name. 3. Don't do any type cast to io memory. 4. Add dummy stub for clk framework. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-10-13usb: gadget: add new usb gadget for ACM and mass storageKlaus Schwarzkopf1-0/+2
This driver provides two functions in one configuration: a mass storage, and a ACM (serial port) link. Heavily based on multi.c and cdc2.c Signed-off-by: Klaus Schwarzkopf <schwarzkopf@sensortherm.de> Signed-off-by: Felipe Balbi <balbi@ti.com>