Age | Commit message (Collapse) | Author | Files | Lines |
|
It's possible that the device firmware crashes and is able to recover
due to some configuration and/or other issue. If a live migration
is in progress while the firmware crashes, the live migration will
fail. However, the VF PCI device should still be functional post
crash recovery and subsequent migrations should go through as
expected.
When the pds_core device notices that firmware crashes it sends an
event to all its client drivers. When the pds_vfio driver receives
this event while migration is in progress it will request a deferred
reset on the next migration state transition. This state transition
will report failure as well as any subsequent state transition
requests from the VMM/VFIO. Based on uapi/vfio.h the only way out of
VFIO_DEVICE_STATE_ERROR is by issuing VFIO_DEVICE_RESET. Once this
reset is done, the migration state will be reset to
VFIO_DEVICE_STATE_RUNNING and migration can be performed.
If the event is received while no migration is in progress (i.e.
the VM is in normal operating mode), then no actions are taken
and the migration state remains VFIO_DEVICE_STATE_RUNNING.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230807205755.29579-8-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
In order to support dirty page tracking, the driver has to implement
the VFIO subsystem's vfio_log_ops. This includes log_start, log_stop,
and log_read_and_clear.
All of the tracker resources are allocated and dirty tracking on the
device is started during log_start. The resources are cleaned up and
dirty tracking on the device is stopped during log_stop. The dirty
pages are determined and reported during log_read_and_clear.
In order to support these callbacks admin queue commands are used.
All of the adminq queue command structures and implementations
are included as part of this patch.
PDS_LM_CMD_DIRTY_STATUS is added to query the current status of
dirty tracking on the device. This includes if it's enabled (i.e.
number of regions being tracked from the device's perspective) and
the maximum number of regions supported from the device's perspective.
PDS_LM_CMD_DIRTY_ENABLE is added to enable dirty tracking on the
specified number of regions and their iova ranges.
PDS_LM_CMD_DIRTY_DISABLE is added to disable dirty tracking for all
regions on the device.
PDS_LM_CMD_READ_SEQ and PDS_LM_CMD_DIRTY_WRITE_ACK are added to
support reading and acknowledging the currently dirtied pages.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20230807205755.29579-7-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Add live migration support via the VFIO subsystem. The migration
implementation aligns with the definition from uapi/vfio.h and uses
the pds_core PF's adminq for device configuration.
The ability to suspend, resume, and transfer VF device state data is
included along with the required admin queue command structures and
implementations.
PDS_LM_CMD_SUSPEND and PDS_LM_CMD_SUSPEND_STATUS are added to support
the VF device suspend operation.
PDS_LM_CMD_RESUME is added to support the VF device resume operation.
PDS_LM_CMD_STATE_SIZE is added to determine the exact size of the VF
device state data.
PDS_LM_CMD_SAVE is added to get the VF device state data.
PDS_LM_CMD_RESTORE is added to restore the VF device with the
previously saved data from PDS_LM_CMD_SAVE.
PDS_LM_CMD_HOST_VF_STATUS is added to notify the DSC/firmware when
a migration is in/not-in progress from the host's perspective. The
DSC/firmware can use this to clear/setup any necessary state related
to a migration.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230807205755.29579-6-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The pds_core driver will supply adminq services, so find the PF
and register with the DSC services.
Use the following commands to enable a VF:
echo 1 > /sys/bus/pci/drivers/pds_core/$PF_BDF/sriov_numvfs
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230807205755.29579-5-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This is the initial framework for the new pds-vfio-pci device driver.
This does the very basics of registering the PDS PCI device and
configuring it as a VFIO PCI device.
With this change, the VF device can be bound to the pds-vfio-pci driver
on the host and presented to the VM as an ethernet VF.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230807205755.29579-3-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Currently only Mellanox uses the combine_ranges function. The
new pds_vfio driver also needs this function. So, move it to
a common location for other vendor drivers to use.
Also, fix RCT ordering while moving/renaming the function.
Cc: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20230807205755.29579-2-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This commit enables the dynamic allocation of EQs at runtime, allowing
for more flexibility in managing completion EQs and reducing the memory
overhead of driver load. Whenever a CQ is created for a given vector
index, the driver will lookup to see if there is an already mapped
completion EQ for that vector, if so, utilize it. Otherwise, allocate a
new EQ on demand and then utilize it for the CQ completion events.
Add a protection lock to the EQ table to protect from concurrent EQ
creation attempts.
While at it, replace mlx5_vector2irqn()/mlx5_vector2eqn() with
mlx5_comp_eqn_get() and mlx5_comp_irqn_get() which will allocate an
EQ on demand if no EQ is found for the given vector.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
To accurately represent its purpose, rename the function that retrieves
the value of maximum vectors from mlx5_comp_vectors_count() to
mlx5_comp_vectors_max().
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Now both the physical path and the emulated path can support an IO page
table replacement. Call iommufd_device_replace/iommufd_access_replace(),
when vdev->iommufd_attached is true.
Also update the VFIO_DEVICE_ATTACH_IOMMUFD_PT kdoc in the uAPI header.
Link: https://lore.kernel.org/r/b5f01956ff161f76aa52c95b0fa1ad6eaca95c4a.1690523699.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
A driver that doesn't implement ops->dma_unmap shouldn't be allowed to do
vfio_pin/unpin_pages(), though it can use vfio_dma_rw() to access an iova
range. Deny !ops->dma_unmap cases in vfio_pin/unpin_pages().
Link: https://lore.kernel.org/r/85d622729d8f2334b35d42f1c568df1ededb9171.1690523699.git.nicolinc@nvidia.com
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
vfio_group is not needed for vfio device cdev, so with vfio device cdev
introduced, the vfio_group infrastructures can be compiled out if only
cdev is needed.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-26-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The IOMMU_CAP_CACHE_COHERENCY check only applies to the physical devices
that are IOMMU-backed. But it is now in the group code. If want to compile
vfio_group infrastructure out, this check needs to be moved out of the group
code.
Another reason for this change is to fail the device registration for the
physical devices that do not have IOMMU if the group code is not compiled
as the cdev interface does not support such devices.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-25-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This adds ioctl for userspace to attach device cdev fd to and detach
from IOAS/hw_pagetable managed by iommufd.
VFIO_DEVICE_ATTACH_IOMMUFD_PT: attach vfio device to IOAS or hw_pagetable
managed by iommufd. Attach can be undo
by VFIO_DEVICE_DETACH_IOMMUFD_PT or device
fd close.
VFIO_DEVICE_DETACH_IOMMUFD_PT: detach vfio device from the current attached
IOAS or hw_pagetable managed by iommufd.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-24-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This adds ioctl for userspace to bind device cdev fd to iommufd.
VFIO_DEVICE_BIND_IOMMUFD: bind device to an iommufd, hence gain DMA
control provided by the iommufd. open_device
op is called after bind_iommufd op.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230718135551.6592-23-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This adds a local variable to store the user pointer cast result from arg.
It avoids the repeated casts in the code when more ioctls are added.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-22-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This saves some lines when adding the kvm get logic for the vfio_device
cdev path.
This also renames _vfio_device_get_kvm_safe() to be vfio_device_get_kvm_safe().
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-20-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This adds cdev support for vfio_device. It allows the user to directly
open a vfio device w/o using the legacy container/group interface, as a
prerequisite for supporting new iommu features like nested translation
and etc.
The device fd opened in this manner doesn't have the capability to access
the device as the fops open() doesn't open the device until the successful
VFIO_DEVICE_BIND_IOMMUFD ioctl which will be added in a later patch.
With this patch, devices registered to vfio core would have both the legacy
group and the new device interfaces created.
- group interface : /dev/vfio/$groupID
- device interface: /dev/vfio/devices/vfioX - normal device
("X" is a unique number across vfio devices)
For a given device, the user can identify the matching vfioX by searching
the vfio-dev folder under the sysfs path of the device. Take PCI device
(0000:6a:01.0) as an example, /sys/bus/pci/devices/0000\:6a\:01.0/vfio-dev/vfioX
implies the matching vfioX under /dev/vfio/devices/, and vfio-dev/vfioX/dev
contains the major:minor number of the matching /dev/vfio/devices/vfioX.
The user can get device fd by opening the /dev/vfio/devices/vfioX.
The vfio_device cdev logic in this patch:
*) __vfio_register_dev() path ends up doing cdev_device_add() for each
vfio_device if VFIO_DEVICE_CDEV configured.
*) vfio_unregister_group_dev() path does cdev_device_del();
cdev interface does not support noiommu devices, so VFIO only creates the
legacy group interface for the physical devices that do not have IOMMU.
noiommu users should use the legacy group interface.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-19-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
refcount
device_del() destroys the vfio-dev/vfioX under the sysfs for vfio_device.
There is no reason to keep it while the device is going to be unregistered.
This movement is also a preparation for adding vfio_device cdev. Kernel
should remove the cdev node of the vfio_device to avoid new registration
refcount increment while the device is going to be unregistered.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-18-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
unregister
This avoids endless vfio_device refcount increment by userspace, which
would keep blocking the vfio_unregister_group_dev().
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-17-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This prepares for adding DETACH ioctl for emulated VFIO devices.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-16-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This prepares for adding DETACH ioctl for physical VFIO devices.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-14-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
.bind_iommufd() will generate an ID to represent this bond, which is
needed by userspace for further usage. Store devid in vfio_device_file
to avoid passing the pointer in multiple places.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-13-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This aligns the bind/attach logic with the coming vfio device cdev support.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-12-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This moves the noiommu compat validation logic into vfio_df_group_open().
This is more consistent with what will be done in vfio device cdev path.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-11-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
VFIO group has historically allowed multi-open of the device FD. This
was made secure because the "open" was executed via an ioctl to the
group FD which is itself only single open.
However, no known use of multiple device FDs today. It is kind of a
strange thing to do because new device FDs can naturally be created
via dup().
When we implement the new device uAPI (only used in cdev path) there is
no natural way to allow the device itself from being multi-opened in a
secure manner. Without the group FD we cannot prove the security context
of the opener.
Thus, when moving to the new uAPI we block the ability of opening
a device multiple times. Given old group path still allows it we store
a vfio_group pointer in struct vfio_device_file to differentiate.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-10-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This is for counting the devices that are opened via the cdev path. This
count is increased and decreased by the cdev path. The group path checks
it to achieve exclusion with the cdev path. With this, only one path
(group path or cdev path) will claim DMA ownership. This avoids scenarios
in which devices within the same group may be opened via different paths.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-9-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Allow the vfio_device file to be in a state where the device FD is
opened but the device cannot be used by userspace (i.e. its .open_device()
hasn't been called). This inbetween state is not used when the device
FD is spawned from the group FD, however when we create the device FD
directly by opening a cdev it will be opened in the blocked state.
The reason for the inbetween state is that userspace only gets a FD but
doesn't gain access permission until binding the FD to an iommufd. So in
the blocked state, only the bind operation is allowed. Completing bind
will allow user to further access the device.
This is implemented by adding a flag in struct vfio_device_file to mark
the blocked state and using a simple smp_load_acquire() to obtain the
flag value and serialize all the device setup with the thread accessing
this device.
Following this lockless scheme, it can safely handle the device FD
unbound->bound but it cannot handle bound->unbound. To allow this we'd
need to add a lock on all the vfio ioctls which seems costly. So once
device FD is bound, it remains bound until the FD is closed.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-8-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This avoids passing too much parameters in multiple functions. Per the
input parameter change, rename the function to be vfio_df_open/close().
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-7-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This makes the vfio file kAPIs to accept vfio device files, also a
preparation for vfio device cdev support.
For the kvm set with vfio device file, kvm pointer is stored in struct
vfio_device_file, and use kvm_ref_lock to protect kvm set and kvm
pointer usage within VFIO. This kvm pointer will be set to vfio_device
after device file is bound to iommufd in the cdev path.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-4-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This prepares for making the below kAPIs to accept both group file
and device file instead of only vfio group file.
bool vfio_file_enforced_coherent(struct file *file);
void vfio_file_set_kvm(struct file *file, struct kvm *kvm);
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-3-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This is preparation for adding vfio device cdev support. vfio device
cdev requires:
1) A per device file memory to store the kvm pointer set by KVM. It will
be propagated to vfio_device:kvm after the device cdev file is bound
to an iommufd.
2) A mechanism to block device access through device cdev fd before it
is bound to an iommufd.
To address the above requirements, this adds a per device file structure
named vfio_device_file. For now, it's only a wrapper of struct vfio_device
pointer. Other fields will be added to this per file structure in future
commits.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-2-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This is the way user to invoke hot-reset for the devices opened by cdev
interface. User should check the flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED
in the output of VFIO_DEVICE_GET_PCI_HOT_RESET_INFO ioctl before doing
hot-reset for cdev devices.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718105542.4138-11-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This copies the vfio_pci_dependent_device to userspace during looping each
affected device for reporting vfio_pci_hot_reset_info. This avoids counting
the affected devices and allocating a potential large buffer to store the
vfio_pci_dependent_device of all the affected devices before copying them
to userspace.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230718105542.4138-10-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This allows VFIO_DEVICE_GET_PCI_HOT_RESET_INFO ioctl use the iommufd_ctx
of the cdev device to check the ownership of the other affected devices.
When VFIO_DEVICE_GET_PCI_HOT_RESET_INFO is called on an IOMMUFD managed
device, the new flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID is reported to indicate
the values returned are IOMMUFD devids rather than group IDs as used when
accessing vfio devices through the conventional vfio group interface.
Additionally the flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED will be reported
in this mode if all of the devices affected by the hot-reset are owned by
either virtue of being directly bound to the same iommufd context as the
calling device, or implicitly owned via a shared IOMMU group.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718105542.4138-9-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
There are drivers that need to search vfio_device within a given dev_set.
e.g. vfio-pci. So add a helper.
vfio_pci_is_device_in_set() now returns -EBUSY in commit a882c16a2b7e
("vfio/pci: Change vfio_pci_try_bus_reset() to use the dev_set") where
it was trying to preserve the return of vfio_pci_try_zap_and_vma_lock_cb().
However, it makes more sense to return -ENODEV.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718105542.4138-8-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This prepares to add another method for hot reset. The major hot reset logic
are moved to vfio_pci_ioctl_pci_hot_reset_groups().
No functional change is intended.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718105542.4138-3-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This suits more on what the code does.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718105542.4138-2-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Pull VFIO updates from Alex Williamson:
- Adjust log levels for common messages (Oleksandr Natalenko, Alex
Williamson)
- Support for dynamic MSI-X allocation (Reinette Chatre)
- Enable and report PCIe AtomicOp Completer capabilities (Alex
Williamson)
- Cleanup Kconfigs for vfio bus drivers (Alex Williamson)
- Add support for CDX bus based devices (Nipun Gupta)
- Fix race with concurrent mdev initialization (Eric Farman)
* tag 'vfio-v6.5-rc1' of https://github.com/awilliam/linux-vfio:
vfio/mdev: Move the compat_class initialization to module init
vfio/cdx: add support for CDX bus
vfio/fsl: Create Kconfig sub-menu
vfio/platform: Cleanup Kconfig
vfio/pci: Cleanup Kconfig
vfio/pci-core: Add capability for AtomicOp completer support
vfio/pci: Also demote hiding standard cap messages
vfio/pci: Clear VFIO_IRQ_INFO_NORESIZE for MSI-X
vfio/pci: Support dynamic MSI-X
vfio/pci: Probe and store ability to support dynamic MSI-X
vfio/pci: Use bitfield for struct vfio_pci_core_device flags
vfio/pci: Update stale comment
vfio/pci: Remove interrupt context counter
vfio/pci: Use xarray for interrupt context storage
vfio/pci: Move to single error path
vfio/pci: Prepare for dynamic interrupt context storage
vfio/pci: Remove negative check on unsigned vector
vfio/pci: Consolidate irq cleanup on MSI/MSI-X disable
vfio/pci: demote hiding ecap messages to debug level
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Nothing surprising in the SoC specific drivers, with the usual
updates:
- Added or improved SoC driver support for Tegra234, Exynos4121,
RK3588, as well as multiple Mediatek and Qualcomm chips
- SCMI firmware gains support for multiple SMC/HVC transport and
version 3.2 of the protocol
- Cleanups amd minor changes for the reset controller, memory
controller, firmware and sram drivers
- Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers"
* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
MAINTAINERS: add PHY-related files to Amlogic SoC file list
drivers: meson: secure-pwrc: always enable DMA domain
tee: optee: Use kmemdup() to replace kmalloc + memcpy
soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
dt-bindings: sram: qcom,imem: document qdu1000
soc: qcom: icc-bwmon: Fix MSM8998 count unit
dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
soc: qcom: socinfo: Add Soc ID for IPQ5300
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
soc: qcom: Fix a IS_ERR() vs NULL bug in probe
soc: qcom: socinfo: Add support for new fields in revision 19
soc: qcom: socinfo: Add support for new fields in revision 18
dt-bindings: firmware: scm: Add compatible for SDX75
soc: qcom: mdt_loader: Fix split image detection
dt-bindings: memory-controllers: drop unneeded quotes
soc: rockchip: dtpm: use C99 array init syntax
firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
soc/tegra: pmc: Use devm_clk_notifier_register()
soc/tegra: pmc: Simplify debugfs initialization
...
|
|
The pointer to mdev_bus_compat_class is statically defined at the top
of mdev_core, and was originally (commit 7b96953bc640 ("vfio: Mediated
device Core driver") serialized by the parent_list_lock. The blamed
commit removed this mutex, leaving the pointer initialization
unserialized. As a result, the creation of multiple MDEVs in parallel
(such as during boot) can encounter errors during the creation of the
sysfs entries, such as:
[ 8.337509] sysfs: cannot create duplicate filename '/class/mdev_bus'
[ 8.337514] vfio_ccw 0.0.01d8: MDEV: Registered
[ 8.337516] CPU: 13 PID: 946 Comm: driverctl Not tainted 6.4.0-rc7 #20
[ 8.337522] Hardware name: IBM 3906 M05 780 (LPAR)
[ 8.337525] Call Trace:
[ 8.337528] [<0000000162b0145a>] dump_stack_lvl+0x62/0x80
[ 8.337540] [<00000001622aeb30>] sysfs_warn_dup+0x78/0x88
[ 8.337549] [<00000001622aeca6>] sysfs_create_dir_ns+0xe6/0xf8
[ 8.337552] [<0000000162b04504>] kobject_add_internal+0xf4/0x340
[ 8.337557] [<0000000162b04d48>] kobject_add+0x78/0xd0
[ 8.337561] [<0000000162b04e0a>] kobject_create_and_add+0x6a/0xb8
[ 8.337565] [<00000001627a110e>] class_compat_register+0x5e/0x90
[ 8.337572] [<000003ff7fd815da>] mdev_register_parent+0x102/0x130 [mdev]
[ 8.337581] [<000003ff7fdc7f2c>] vfio_ccw_sch_probe+0xe4/0x178 [vfio_ccw]
[ 8.337588] [<0000000162a7833c>] css_probe+0x44/0x80
[ 8.337599] [<000000016279f4da>] really_probe+0xd2/0x460
[ 8.337603] [<000000016279fa08>] driver_probe_device+0x40/0xf0
[ 8.337606] [<000000016279fb78>] __device_attach_driver+0xc0/0x140
[ 8.337610] [<000000016279cbe0>] bus_for_each_drv+0x90/0xd8
[ 8.337618] [<00000001627a00b0>] __device_attach+0x110/0x190
[ 8.337621] [<000000016279c7c8>] bus_rescan_devices_helper+0x60/0xb0
[ 8.337626] [<000000016279cd48>] drivers_probe_store+0x48/0x80
[ 8.337632] [<00000001622ac9b0>] kernfs_fop_write_iter+0x138/0x1f0
[ 8.337635] [<00000001621e5e14>] vfs_write+0x1ac/0x2f8
[ 8.337645] [<00000001621e61d8>] ksys_write+0x70/0x100
[ 8.337650] [<0000000162b2bdc4>] __do_syscall+0x1d4/0x200
[ 8.337656] [<0000000162b3c828>] system_call+0x70/0x98
[ 8.337664] kobject: kobject_add_internal failed for mdev_bus with -EEXIST, don't try to register things with the same name in the same directory.
[ 8.337668] kobject: kobject_create_and_add: kobject_add error: -17
[ 8.337674] vfio_ccw: probe of 0.0.01d9 failed with error -12
[ 8.342941] vfio_ccw_mdev aeb9ca91-10c6-42bc-a168-320023570aea: Adding to iommu group 2
Move the initialization of the mdev_bus_compat_class pointer to the
init path, to match the cleanup in module exit. This way the code
in mdev_register_parent() can simply link the new parent to it,
rather than determining whether initialization is required first.
Fixes: 89345d5177aa ("vfio/mdev: embedd struct mdev_parent in the parent data structure")
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230626133642.2939168-1-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Convert all instances of direct pte_t* dereferencing to instead use
ptep_get() helper. This means that by default, the accesses change from a
C dereference to a READ_ONCE(). This is technically the correct thing to
do since where pgtables are modified by HW (for access/dirty) they are
volatile and therefore we should always ensure READ_ONCE() semantics.
But more importantly, by always using the helper, it can be overridden by
the architecture to fully encapsulate the contents of the pte. Arch code
is deliberately not converted, as the arch code knows best. It is
intended that arch code (arm64) will override the default with its own
implementation that can (e.g.) hide certain bits from the core code, or
determine young/dirty status by mixing in state from another source.
Conversion was done using Coccinelle:
----
// $ make coccicheck \
// COCCI=ptepget.cocci \
// SPFLAGS="--include-headers" \
// MODE=patch
virtual patch
@ depends on patch @
pte_t *v;
@@
- *v
+ ptep_get(v)
----
Then reviewed and hand-edited to avoid multiple unnecessary calls to
ptep_get(), instead opting to store the result of a single call in a
variable, where it is correct to do so. This aims to negate any cost of
READ_ONCE() and will benefit arch-overrides that may be more complex.
Included is a fix for an issue in an earlier version of this patch that
was pointed out by kernel test robot. The issue arose because config
MMU=n elides definition of the ptep helper functions, including
ptep_get(). HUGETLB_PAGE=n configs still define a simple
huge_ptep_clear_flush() for linking purposes, which dereferences the ptep.
So when both configs are disabled, this caused a build error because
ptep_get() is not defined. Fix by continuing to do a direct dereference
when MMU=n. This is safe because for this config the arch code cannot be
trying to virtualize the ptes because none of the ptep helpers are
defined.
Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
vfio-cdx driver enables IOCTLs for user space to query
MMIO regions for CDX devices and mmap them. This change
also adds support for reset of CDX devices. With VFIO
enabled on CDX devices, user-space applications can also
exercise DMA securely via IOMMU on these devices.
This change adds the VFIO CDX driver and enables the following
ioctls for CDX devices:
- VFIO_DEVICE_GET_INFO:
- VFIO_DEVICE_GET_REGION_INFO
- VFIO_DEVICE_RESET
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20230531124557.11009-1-nipun.gupta@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
For consistency with pci and platform, push the vfio-fsl-mc option into a
sub-menu.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20230614193948.477036-4-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Like vfio-pci, there's also a base module here where vfio-amba depends on
vfio-platform, when really it only needs vfio-platform-base. Create a
sub-menu for platform drivers and a nested menu for reset drivers. Cleanup
Makefile to make use of new CONFIG_VFIO_PLATFORM_BASE for building the
shared modules and traversing reset modules.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20230614193948.477036-3-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
It should be possible to select vfio-pci variant drivers without building
vfio-pci itself, which implies each variant driver should select
vfio-pci-core.
Fix the top level vfio Makefile to traverse pci based on vfio-pci-core
rather than vfio-pci.
Mark MMAP and INTX options depending on vfio-pci-core to cleanup resulting
config if core is not enabled.
Push all PCI related vfio options to a sub-menu and make descriptions
consistent.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230614193948.477036-2-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Test and enable PCIe AtomicOp completer support of various widths and
report via device-info capability to userspace.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Robin Voetter <robin@streamhpc.com>
Tested-by: Robin Voetter <robin@streamhpc.com>
Link: https://lore.kernel.org/r/20230519214748.402003-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
No invocation of pin_user_pages_remote() uses the vmas parameter, so
remove it. This forms part of a larger patch set eliminating the use of
the vmas parameters altogether.
Link: https://lkml.kernel.org/r/28f000beb81e45bf538a2aaa77c90f5482b67a32.1684350871.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The value returned by an fsl-mc driver's remove function is mostly
ignored. (Only an error message is printed if the value is non-zero
and then device removal continues unconditionally.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # sanity checks
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
Apply the same logic as commit 912b625b4dcf ("vfio/pci: demote hiding
ecap messages to debug level") for the less common case of hiding
standard capabilities.
Reviewed-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230523225250.1215911-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Dynamic MSI-X is supported. Clear VFIO_IRQ_INFO_NORESIZE
to provide guidance to user space.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/fd1ef2bf6ae972da8e2805bc95d5155af5a8fb0a.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|