summaryrefslogtreecommitdiff
path: root/drivers/watchdog/dw_wdt.c
AgeCommit message (Collapse)AuthorFilesLines
2020-08-05watchdog: Replace HTTP links with HTTPS onesAlexander A. Klimov1-1/+1
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200713205821.38223-1-grandmaster@al2klimov.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: dw_wdt: Add DebugFS filesSerge Semin1-0/+68
For the sake of the easier device-driver debug procedure, we added a DebugFS file with the controller registers state. It's available only if kernel is configured with DebugFS support. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200530073557.22661-8-Sergey.Semin@baikalelectronics.ru Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: dw_wdt: Add pre-timeouts supportSerge Semin1-8/+130
DW Watchdog can rise an interrupt in case if IRQ request mode is enabled and timer reaches the zero value. In this case the IRQ lane is left pending until either the next watchdog kick event (watchdog restart) or until the WDT_EOI register is read or the device/system reset. This interface can be used to implement the pre-timeout functionality optionally provided by the Linux kernel watchdog devices. IRQ mode provides a two stages timeout interface. It means the IRQ is raised when the counter reaches zero, while the system reset occurs only after subsequent timeout if the timer restart is not performed. Due to this peculiarity the pre-timeout value is actually set to the achieved hardware timeout, while the real watchdog timeout is considered to be twice as much of it. This applies a significant limitation on the pre-timeout values, so current implementation supports either zero value, which disables the pre-timeout events, or non-zero values, which imply the pre-timeout to be at least half of the current watchdog timeout. Note that we ask the interrupt controller to detect the rising-edge pre-timeout interrupts to prevent the high-level-IRQs flood, since if the pre-timeout happens, the IRQ lane will be left pending until it's cleared by the timer restart. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200530073557.22661-7-Sergey.Semin@baikalelectronics.ru Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: dw_wdt: Support devices with asynch clocksSerge Semin1-5/+43
DW Watchdog IP core can be synthesised with asynchronous timer/APB clocks support (WDT_ASYNC_CLK_MODE_ENABLE == 1). In this case separate clock signals are supposed to be used to feed watchdog timer and APB interface of the device. Currently the driver supports the synchronous mode only. Since there is no way to determine which mode was actually activated for device from its registers, we have to rely on the platform device configuration data. If optional "pclk" clock source is supplied, we consider the device working in asynchronous mode, otherwise the driver falls back to the synchronous configuration. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200530073557.22661-6-Sergey.Semin@baikalelectronics.ru Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-08-05watchdog: dw_wdt: Support devices with non-fixed TOP valuesSerge Semin1-24/+167
In case if the DW Watchdog IP core is synthesised with WDT_USE_FIX_TOP == false, the TOP interval indexes make the device to load a custom periods to the counter. These periods are hardwired at the IP synthesis stage and can be within [2^8, 2^(WDT_CNT_WIDTH - 1)]. Alas their values can't be detected at runtime and must be somehow supplied to the driver so one could properly determine the watchdog timeout intervals. For this purpose we suggest to have a vendor- specific dts property "snps,watchdog-tops" utilized, which would provide an array of sixteen counter values. At device probe stage they will be used to initialize the watchdog device timeouts determined from the array values and current clocks source rate. In order to have custom TOP values supported the driver must be altered in the following way. First of all the fixed-top values ready-to-use array must be determined for compatibility with currently supported devices, which were synthesised with WDT_USE_FIX_TOP == true. It will be used if either fixed TOP feature is detected being enabled or no custom TOPs are fetched from the device dt node. Secondly at the probe stage we must initialize an array of the watchdog timeouts corresponding to the detected TOPs list and the reference clock rate. For generality the procedure of initialization is designed in a way to support the TOPs array with no limitations on the items order or value. Finally the watchdog period search methods should be altered to support the new timeouts data structure. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200530073557.22661-5-Sergey.Semin@baikalelectronics.ru Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27watchdog: dw_wdt: ping watchdog to reset countdown before startJack Mitchell1-0/+1
Currently on an rk3288 SoC when trying to use the watchdog the SoC will instantly reset. This is due to the watchdog countdown counter being set to its initial value of 0x0. Reset the watchdog counter before start in order to correctly start the countdown timer from the right position. Signed-off-by: Jack Mitchell <ml@embed.me.uk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200107155155.278521-1-ml@embed.me.uk Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27watchdog: make DesignWare watchdog allow users to set bigger timeout valueWang, Peng 1. (NSB - CN/Hangzhou)1-1/+9
watchdog_dev.c provides means to allow users to set bigger timeout value than HW can support, make DesignWare watchdog align with this. Signed-off-by: Peng Wang <peng.1.wang@nokia-sbell.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/8fa54e92c6cd4544a7a3eb60a373ac43@nokia-sbell.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-05watchdog: Convert to use devm_platform_ioremap_resourceGuenter Roeck1-3/+1
Use devm_platform_ioremap_resource to reduce source code size, improve readability, and reduce the likelyhood of bugs. The conversion was done automatically with coccinelle using the following semantic patch. @r@ identifier res, pdev; expression a; expression index; expression e; @@ <+... - res = platform_get_resource(pdev, IORESOURCE_MEM, index); - a = devm_ioremap_resource(e, res); + a = devm_platform_ioremap_resource(pdev, index); ...+> @depends on r@ identifier r.res; @@ - struct resource *res; ... when != res @@ identifier res, pdev; expression index; expression a; @@ - struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, index); - a = devm_ioremap_resource(&pdev->dev, res); + a = devm_platform_ioremap_resource(pdev, index); Cc: Joel Stanley <joel@jms.id.au> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Keguang Zhang <keguang.zhang@gmail.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Avi Fishman <avifishman70@gmail.com> Cc: Nancy Yuen <yuenn@google.com> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Barry Song <baohua@kernel.org> Cc: Orson Zhai <orsonzhai@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Marc Gonzalez <marc.w.gonzalez@free.fr> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Michal Simek <michal.simek@xilinx.com> (cadence/xilinx wdts) Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-03-02watchdog: dw: remove useless pr_fmtJisheng Zhang1-2/+0
When switch to watchdog infrastructure, pr_* usage is removed, so there's no any users of the pr_fmt, remove it. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-03-13watchdog: dw: save/restore control and timeout across suspend/resumeBrian Norris1-0/+9
Some platforms lose this state in suspend. It should be safe to do this unconditionally. Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-13watchdog: dw: RMW the control registerBrian Norris1-8/+15
RK3399 has rst_pulse_length in CONTROL_REG[4:2], determining the length of pulse to issue for system reset. We shouldn't clobber this value, because that might make the system reset ineffective. On RK3399, we're seeing that a value of 000b (meaning 2 cycles) yields an unreliable (partial?) reset, and so we only fully reset after the watchdog fires a second time. If we retain the system default (010b, or 8 clock cycles), then the watchdog reset is much more reliable. Read-modify-write retains the system value and improves reset reliability. It seems we were intentionally clobbering the response mode previously, to ensure we performed a system reset (we don't support an interrupt notification), so retain that explicitly. Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-12-28watchdog: dw_wdt: add stop watchdog operationOleksij Rempel1-2/+16
The only way of stopping the watchdog is by resetting it. Add the watchdog op for stopping the device and reset if a reset line is provided. At same time WDOG_HW_RUNNING should be remove from dw_wdt_start. As commented by Guenter Roeck: dw_wdt sets WDOG_HW_RUNNING in its open function. Result is that the kref_get() in watchdog_open() won't be executed. But then kref_put() in close will be called since the watchdog now does stop. This causes the imbalance. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-watchdog@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-07-03watchdog: dw_wdt: get reset lines from dtSteffen Trumtrar1-0/+11
The dw_wdt has an external reset line, that can keep the device in reset and therefore rendering it useless and also is the only way of stopping the watchdog once it was started. Get the reset lines for this core from the devicetree. As these lines are optional, use devm_reset_control_get_optional_shared. If the reset line is not specified in the devicetree, the reset framework will just skip deasserting and continue. This way all users of the driver will continue to function without any harm, even if the reset line is not specified in the devicetree. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Cc: linux-watchdog@vger.kernel.org Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-02-25watchdog: dw_wdt: Use watchdog core to install restart handlerGuenter Roeck1-16/+7
Use the infrastructure provided by the watchdog core to install the restart handler. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-09-23watchdog: dw_wdt: Read clock rate only once and validate itGuenter Roeck1-2/+9
Coverity reports: divide_by_zero: In expression readl(dw_wdt->regs + 8) / clk_get_rate(dw_wdt->clk), division by expression clk_get_rate(dw_wdt->clk) which may be zero has undefined behavior. The clock used for the watchdog timer won't change its rate, so read it only once during probe. Also validate it and abort the probe function with an error if it is 0. Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-03-16watchdog: dw_wdt: Convert to use watchdog infrastructureGuenter Roeck1-207/+116
Convert driver to use watchdog infrastructure. This includes infrastructure support to handle watchdog keepalive if the watchdog is running while the watchdog device is closed. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-27watchdog: dw_wdt: fix signedness bug in dw_wdt_top_in_seconds()Jisheng Zhang1-1/+1
On 64bit platforms, "(1 << (16 + top)) / clk_get_rate(dw_wdt.clk)" is sign-extended to 64bit then converted to unsigned 64bit, finally divide the clk rate. If the top is the maximum TOP i.e 15, "(1 << (16 +15))" will be sign-extended to 0xffffffff80000000, then converted to unsigned 0xffffffff80000000, which is a huge number, thus the final result is wrong. We fix this issue by giving usigned value(1U in this case) at first. Let's assume clk rate is 25MHZ, Before the patch: dw_wdt_top_in_seconds(15) = -864612050 After the patch: dw_wdt_top_in_seconds(15) = 85 Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: dw_wdt: keepalive the watchdog at write timeDoug Anderson1-0/+1
If you've got code that does this in a tight loop 1. Open watchdog 2. Send 'expect close' 3. Close watchdog ...you'll eventually trigger a watchdog reset. You can reproduce this by using daisydog (1) and running: while true; do daisydog -c > /dev/null; done The problem is that each time you write to the watchdog for 'expect close' it moves the timer .5 seconds out. The timer thus never fires and never pats the watchdog for you. 1: http://git.chromium.org/gitweb/?p=chromiumos/third_party/daisydog.git Signed-off-by: Doug Anderson <dianders@chromium.org> Tested-by: Jisheng Zhang <jszhang@marvell.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: dw_wdt: No need for a spinlockDoug Anderson1-7/+0
Right now the dw_wdt uses a spinlock to protect dw_wdt_open(). The problem is that while holding the spinlock we call: -> dw_wdt_set_top() -> dw_wdt_top_in_seconds() -> clk_get_rate() -> clk_prepare_lock() -> mutex_lock() Locking a mutex while holding a spinlock is not allowed and leads to warnings like "BUG: spinlock wrong CPU on CPU#1", among other problems. There's no reason to use a spinlock. Only dw_wdt_open() was protected and the test_and_set_bit() at the start of that function protects us anyway. Signed-off-by: Doug Anderson <dianders@chromium.org> Tested-by: Jisheng Zhang <jszhang@marvell.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17watchdog: dw_wdt: Try to get a 30 second watchdog by defaultDoug Anderson1-2/+4
The dw_wdt_set_top() function takes in a value in seconds. In dw_wdt_open() we were calling it with a value that's supposed to represent the maximum value programmed into the "top" register with a comment saying that we were trying to set the watchdog to its maximum value. Instead we ended up setting the watchdog to ~15 seconds. Let's fix this. However, setting things to the "max" gives me an 86 second watchdog in the system I'm looking at. 86 seconds feels a little too long. We'll explicitly choose 30 seconds as a more reasonable value. NOTE: Ideally this driver should be transitioned to be a real watchdog driver. Then we could use "watchdog_init_timeout" and let the timeout be specified in a number of ways (device tree, module parameter, etc). This patch should be considered a bit of a stopgap solution. Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17watchdog: dw_wdt: pat the watchdog before enabling itDoug Anderson1-7/+19
On some dw_wdt implementations the "top" register may be initted to 0 at bootup. In such a case, each "pat" of the watchdog will reset the timer to 0xffff. That's pretty short. The input clock of the wdt can be any of a wide range of values. On an rk3288 system, I've seen the wdt clock be 24.75 MHz. That means each tick is ~40ns and we'll count to 0xffff in ~2.6ms. Because of the above two facts, it's a really good idea to pat the watchdog after initting the "top" register properly and before enabling the watchdog. If you don't then there's no way we'll get the next heartbeat in time. Jisheng Zhang fixed this problem on some dw_wdt versions by using the TOP_INIT feature. However, the dw_wdt on rk3288 doesn't have TOP_INIT so it's a good idea to also pat the watchdog manually. Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-11-04Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
2014-10-20watchdog: dw_wdt: add restart handler supportJisheng Zhang1-0/+32
The kernel core now provides an API to trigger a system restart. Register with it to support restarting the system via. watchdog. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: dw_wdt: initialise TOP_INIT in dw_wdt_set_top()Jisheng Zhang1-1/+3
The TOP_INIT, ie bit 4-7 of the WDOG_TIMEOUT_RANGE_REG_OFFSET register may be zero, so the timeout period may be very short after initialization is done, thus the system may be reset soon after enabling. We fix this problem by also initialising the TOP_INIT when setting TOP in function dw_wdt_set_top(). Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-08-06watchdog: dw_wdt: Remove the un-necessary check after platform_get_resource()George Cherian1-3/+0
devm_ioremap_resource() checks for valid resource. Remove the un-necessary check after platform_get_resource(). Signed-off-by: George Cherian <george.cherian@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-01-29watchdog: dw_wdt: remove build dependenciesBaruch Siach1-1/+1
There is nothing ARM specific in this driver, and we intend to use it on the Xtensa architecture. Also, clk.h now includes stubs for !CONFIG_HAVE_CLK, so the driver should build anyway. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-11-17watchdog: dw: Enable OF support for DW watchdog timerDinh Nguyen1-0/+10
Add device tree support to the DW watchdog timer. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: linux-watchdog@vger.kernel.org
2013-11-17watchdog: Get rid of MODULE_ALIAS_MISCDEV statementsJean Delvare1-1/+0
I just can't find any value in MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) and MODULE_ALIAS_MISCDEV(TEMP_MINOR) statements. Either the device is enumerated and the driver already has a module alias (e.g. PCI, USB etc.) that will get the right driver loaded automatically. Or the device is not enumerated and loading its driver will lead to more or less intrusive hardware poking. Such hardware poking should be limited to a bare minimum, so the user should really decide which drivers should be tried and in what order. Trying them all in arbitrary order can't do any good. On top of that, loading that many drivers at once bloats the kernel log. Also many drivers will stay loaded afterward, bloating the output of "lsmod" and wasting memory. Some modules (cs5535_mfgpt which gets loaded as a dependency) can't even be unloaded! If defining char-major-10-130 is needed then it should happen in user-space. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Zwane Mwaikambo <zwane@arm.linux.org.uk> Cc: Jim Cromie <jim.cromie@gmail.com>
2013-11-17watchdog: dw_wdt: Add __user annotationJingoo Han1-2/+2
Added __user annotation to fix the following sparse warnings. drivers/watchdog/dw_wdt.c:206:38: warning: incorrect type in argument 1 (different address spaces) drivers/watchdog/dw_wdt.c:206:38: expected void [noderef] <asn:1>*to drivers/watchdog/dw_wdt.c:206:38: got struct watchdog_info *<noident> drivers/watchdog/dw_wdt.c:211:24: warning: incorrect type in initializer (different address spaces) drivers/watchdog/dw_wdt.c:211:24: expected int const [noderef] <asn:1>*register __p drivers/watchdog/dw_wdt.c:211:24: got int *<noident> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-11-17watchdog: dw_wdt: use clk_prepare_enable and clk_disable_unprepareHeiko Stübner1-5/+5
This is necessary to make the driver work with platforms using the common clock framework. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-11-17watchdog: dw_wdt: convert to SIMPLE_DEV_PM_OPSHeiko Stübner1-8/+3
The dw_wdt only provides PM_SLEEP operations, so convert the driver to use SIMPLE_DEV_PM_OPS instead of populating the struct manually. This has the added effect of simplifying the CONFIG_PM ifdefs. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11watchdog: dw_wdt: Staticize local symbolSachin Kamat1-2/+2
'dw_wdt_write' is used only in this file. Make it static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11watchdog: dw_wdt: use devm_clk_get()Jingoo Han1-5/+2
Use devm_clk_get() to make cleanup paths more simple. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-01-26watchdog: Convert to devm_ioremap_resource()Thierry Reding1-3/+3
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29watchdog: remove use of __devexitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29watchdog: remove use of __devinitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29watchdog: remove use of __devexit_pBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-27watchdog: nowayout is boolWim Van Sebroeck1-2/+2
nowayout is actually a boolean value. So make it bool for all watchdog device drivers. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-03-27watchdog: Use pr_<fmt> and pr_<level>Joe Perches1-1/+2
Use the current logging styles. Make sure all output has a prefix. Add missing newlines. Remove now unnecessary PFX, NAME, and miscellaneous other #defines. Coalesce formats. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: dw_wdt.c: use devm_request_and_ioremapJulia Lawall1-5/+1
Reimplement a call to devm_request_mem_region followed by a call to ioremap or ioremap_nocache by a call to devm_request_and_ioremap. The semantic patch that makes this transformation is as follows: (http://coccinelle.lip6.fr/) // <smpl> @nm@ expression myname; identifier i; @@ struct platform_driver i = { .driver = { .name = myname } }; @@ expression dev,res,size; expression nm.myname; @@ -if (!devm_request_mem_region(dev, res->start, size, - \(res->name\|dev_name(dev)\|myname\))) { - ... - return ...; -} ... when != res->start ( -devm_ioremap(dev,res->start,size) +devm_request_and_ioremap(dev,res) | -devm_ioremap_nocache(dev,res->start,size) +devm_request_and_ioremap(dev,res) ) ... when any when != res->start // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-06watchdog: convert drivers/watchdog/* to use module_platform_driver()Axel Lin1-11/+1
This patch converts the drivers in drivers/watchdog/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Nicolas Thill <nico@openwrt.org> Cc: Florian Fainelli <florian@openwrt.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Marc Zyngier <maz@misterjones.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Alejandro Cabrera <aldaya@gmail.com> Cc: "George G. Davis" <gdavis@mvista.com> Cc: Sylver Bruneau <sylver.bruneau@googlemail.com> Cc: Vitaly Wool <vital@embeddedalley.com> Cc: Mika Westerberg <mika.westerberg@iki.fi> Cc: Timo Kokkonen <timo.t.kokkonen@nokia.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-22watchdog: add support for the Synopsys DesignWare WDTJamie Iles1-0/+376
The Synopsys DesignWare watchdog is found in several ARM based systems and provides a choice of 16 timeout periods depending on the clock input. The watchdog cannot be disabled once started. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>