summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2024-01-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski263-1556/+3982
Cross-merge networking fixes after downstream PR. No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25Merge tag 'net-6.8-rc2' of ↵Linus Torvalds66-226/+497
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bpf, netfilter and WiFi. Jakub is doing a lot of work to include the self-tests in our CI, as a result a significant amount of self-tests related fixes is flowing in (and will likely continue in the next few weeks). Current release - regressions: - bpf: fix a kernel crash for the riscv 64 JIT - bnxt_en: fix memory leak in bnxt_hwrm_get_rings() - revert "net: macsec: use skb_ensure_writable_head_tail to expand the skb" Previous releases - regressions: - core: fix removing a namespace with conflicting altnames - tc/flower: fix chain template offload memory leak - tcp: - make sure init the accept_queue's spinlocks once - fix autocork on CPUs with weak memory model - udp: fix busy polling - mlx5e: - fix out-of-bound read in port timestamping - fix peer flow lists corruption - iwlwifi: fix a memory corruption Previous releases - always broken: - netfilter: - nft_chain_filter: handle NETDEV_UNREGISTER for inet/ingress basechain - nft_limit: reject configurations that cause integer overflow - bpf: fix bpf_xdp_adjust_tail() with XSK zero-copy mbuf, avoiding a NULL pointer dereference upon shrinking - llc: make llc_ui_sendmsg() more robust against bonding changes - smc: fix illegal rmb_desc access in SMC-D connection dump - dpll: fix pin dump crash for rebound module - bnxt_en: fix possible crash after creating sw mqprio TCs - hv_netvsc: calculate correct ring size when PAGE_SIZE is not 4kB Misc: - several self-tests fixes for better integration with the netdev CI - added several missing modules descriptions" * tag 'net-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits) tsnep: Fix XDP_RING_NEED_WAKEUP for empty fill ring tsnep: Remove FCS for XDP data path net: fec: fix the unhandled context fault from smmu selftests: bonding: do not test arp/ns target with mode balance-alb/tlb fjes: fix memleaks in fjes_hw_setup i40e: update xdp_rxq_info::frag_size for ZC enabled Rx queue i40e: set xdp_rxq_info::frag_size xdp: reflect tail increase for MEM_TYPE_XSK_BUFF_POOL ice: update xdp_rxq_info::frag_size for ZC enabled Rx queue intel: xsk: initialize skb_frag_t::bv_offset in ZC drivers ice: remove redundant xdp_rxq_info registration i40e: handle multi-buffer packets that are shrunk by xdp prog ice: work on pre-XDP prog frag count xsk: fix usage of multi-buffer BPF helpers for ZC XDP xsk: make xsk_buff_pool responsible for clearing xdp_buff::flags xsk: recycle buffer in case Rx queue was full net: fill in MODULE_DESCRIPTION()s for rvu_mbox net: fill in MODULE_DESCRIPTION()s for litex net: fill in MODULE_DESCRIPTION()s for fsl_pq_mdio net: fill in MODULE_DESCRIPTION()s for fec ...
2024-01-25net: dsa: mt7530: support OF-based registration of switch MDIO busArınç ÜNAL1-8/+26
Currently the MDIO bus of the switches the MT7530 DSA subdriver controls can only be registered as non-OF-based. Bring support for registering the bus OF-based. The subdrivers that control switches [with MDIO bus] probed on OF must follow this logic to support all cases properly: No switch MDIO bus defined: Populate ds->user_mii_bus, register the MDIO bus, set the interrupts for PHYs if "interrupt-controller" is defined at the switch node. This case should only be covered for the switches which their dt-bindings documentation didn't document the MDIO bus from the start. This is to keep supporting the device trees that do not describe the MDIO bus on the device tree but the MDIO bus is being used nonetheless. Switch MDIO bus defined: Don't populate ds->user_mii_bus, register the MDIO bus, set the interrupts for PHYs if ["interrupt-controller" is defined at the switch node and "interrupts" is defined at the PHY nodes under the switch MDIO bus node]. Switch MDIO bus defined but explicitly disabled: If the device tree says status = "disabled" for the MDIO bus, we shouldn't need an MDIO bus at all. Instead, just exit as early as possible and do not call any MDIO API. The use of ds->user_mii_bus is inappropriate when the MDIO bus of the switch is described on the device tree [1], which is why we don't populate ds->user_mii_bus in that case. Link: https://lore.kernel.org/netdev/20231213120656.x46fyad6ls7sqyzv@skbuf/ [1] Suggested-by: David Bauer <mail@david-bauer.net> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20240122053431.7751-1-arinc.unal@arinc9.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-25tsnep: Fix XDP_RING_NEED_WAKEUP for empty fill ringGerhard Engleder1-0/+13
The fill ring of the XDP socket may contain not enough buffers to completey fill the RX queue during socket creation. In this case the flag XDP_RING_NEED_WAKEUP is not set as this flag is only set if the RX queue is not completely filled during polling. Set XDP_RING_NEED_WAKEUP flag also if RX queue is not completely filled during XDP socket creation. Fixes: 3fc2333933fd ("tsnep: Add XDP socket zero-copy RX support") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-25tsnep: Remove FCS for XDP data pathGerhard Engleder1-2/+2
The RX data buffer includes the FCS. The FCS is already stripped for the normal data path. But for the XDP data path the FCS is included and acts like additional/useless data. Remove the FCS from the RX data buffer also for XDP. Fixes: 65b28c810035 ("tsnep: Add XDP RX support") Fixes: 3fc2333933fd ("tsnep: Add XDP socket zero-copy RX support") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-25Merge tag 'mlx5-fixes-2024-01-24' of ↵Paolo Abeni16-37/+88
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2024-01-24 This series provides bug fixes to mlx5 driver. Please pull and let me know if there is any problem. * tag 'mlx5-fixes-2024-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: fix a potential double-free in fs_any_create_groups net/mlx5e: fix a double-free in arfs_create_groups net/mlx5e: Ignore IPsec replay window values on sender side net/mlx5e: Allow software parsing when IPsec crypto is enabled net/mlx5: Use mlx5 device constant for selecting CQ period mode for ASO net/mlx5: DR, Can't go to uplink vport on RX rule net/mlx5: DR, Use the right GVMI number for drop action net/mlx5: Bridge, fix multicast packets sent to uplink net/mlx5: Fix a WARN upon a callback command failure net/mlx5e: Fix peer flow lists handling net/mlx5e: Fix inconsistent hairpin RQT sizes net/mlx5e: Fix operation precedence bug in port timestamping napi_poll context net/mlx5: Fix query of sd_group field net/mlx5e: Use the correct lag ports number when creating TISes ==================== Link: https://lore.kernel.org/r/20240124081855.115410-1-saeed@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-25Merge tag 'for-netdev' of ↵Paolo Abeni8-79/+113
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2024-01-25 The following pull-request contains BPF updates for your *net* tree. We've added 12 non-merge commits during the last 2 day(s) which contain a total of 13 files changed, 190 insertions(+), 91 deletions(-). The main changes are: 1) Fix bpf_xdp_adjust_tail() in context of XSK zero-copy drivers which support XDP multi-buffer. The former triggered a NULL pointer dereference upon shrinking, from Maciej Fijalkowski & Tirthendu Sarkar. 2) Fix a bug in riscv64 BPF JIT which emitted a wrong prologue and epilogue for struct_ops programs, from Pu Lehui. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: i40e: update xdp_rxq_info::frag_size for ZC enabled Rx queue i40e: set xdp_rxq_info::frag_size xdp: reflect tail increase for MEM_TYPE_XSK_BUFF_POOL ice: update xdp_rxq_info::frag_size for ZC enabled Rx queue intel: xsk: initialize skb_frag_t::bv_offset in ZC drivers ice: remove redundant xdp_rxq_info registration i40e: handle multi-buffer packets that are shrunk by xdp prog ice: work on pre-XDP prog frag count xsk: fix usage of multi-buffer BPF helpers for ZC XDP xsk: make xsk_buff_pool responsible for clearing xdp_buff::flags xsk: recycle buffer in case Rx queue was full riscv, bpf: Fix unpredictable kernel crash about RV64 struct_ops ==================== Link: https://lore.kernel.org/r/20240125084416.10876-1-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-25net: fec: fix the unhandled context fault from smmuShenwei Wang1-0/+2
When repeatedly changing the interface link speed using the command below: ethtool -s eth0 speed 100 duplex full ethtool -s eth0 speed 1000 duplex full The following errors may sometimes be reported by the ARM SMMU driver: [ 5395.035364] fec 5b040000.ethernet eth0: Link is Down [ 5395.039255] arm-smmu 51400000.iommu: Unhandled context fault: fsr=0x402, iova=0x00000000, fsynr=0x100001, cbfrsynra=0x852, cb=2 [ 5398.108460] fec 5b040000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off It is identified that the FEC driver does not properly stop the TX queue during the link speed transitions, and this results in the invalid virtual I/O address translations from the SMMU and causes the context faults. Fixes: dbc64a8ea231 ("net: fec: move calls to quiesce/resume packet processing out of fec_restart()") Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Link: https://lore.kernel.org/r/20240123165141.2008104-1-shenwei.wang@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-25fjes: fix memleaks in fjes_hw_setupZhipeng Lu1-7/+30
In fjes_hw_setup, it allocates several memory and delay the deallocation to the fjes_hw_exit in fjes_probe through the following call chain: fjes_probe |-> fjes_hw_init |-> fjes_hw_setup |-> fjes_hw_exit However, when fjes_hw_setup fails, fjes_hw_exit won't be called and thus all the resources allocated in fjes_hw_setup will be leaked. In this patch, we free those resources in fjes_hw_setup and prevents such leaks. Fixes: 2fcbca687702 ("fjes: platform_driver's .probe and .remove routine") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240122172445.3841883-1-alexious@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25Merge tag 'ceph-for-6.8-rc2' of https://github.com/ceph/ceph-clientLinus Torvalds1-13/+19
Pull ceph fixes from Ilya Dryomov: "A fix to avoid triggering an assert in some cases where RBD exclusive mappings are involved and a deprecated API cleanup" * tag 'ceph-for-6.8-rc2' of https://github.com/ceph/ceph-client: rbd: don't move requests to the running list on errors rbd: remove usage of the deprecated ida_simple_*() API
2024-01-25i40e: update xdp_rxq_info::frag_size for ZC enabled Rx queueMaciej Fijalkowski1-0/+7
Now that i40e driver correctly sets up frag_size in xdp_rxq_info, let us make it work for ZC multi-buffer as well. i40e_ring::rx_buf_len for ZC is being set via xsk_pool_get_rx_frame_size() and this needs to be propagated up to xdp_rxq_info. Fixes: 1c9ba9c14658 ("i40e: xsk: add RX multi-buffer support") Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-12-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-25i40e: set xdp_rxq_info::frag_sizeMaciej Fijalkowski2-25/+24
i40e support XDP multi-buffer so it is supposed to use __xdp_rxq_info_reg() instead of xdp_rxq_info_reg() and set the frag_size. It can not be simply converted at existing callsite because rx_buf_len could be un-initialized, so let us register xdp_rxq_info within i40e_configure_rx_ring(), which happen to be called with already initialized rx_buf_len value. Commit 5180ff1364bc ("i40e: use int for i40e_status") converted 'err' to int, so two variables to deal with return codes are not needed within i40e_configure_rx_ring(). Remove 'ret' and use 'err' to handle status from xdp_rxq_info registration. Fixes: e213ced19bef ("i40e: add support for XDP multi-buffer Rx") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-11-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-25ice: update xdp_rxq_info::frag_size for ZC enabled Rx queueMaciej Fijalkowski1-14/+23
Now that ice driver correctly sets up frag_size in xdp_rxq_info, let us make it work for ZC multi-buffer as well. ice_rx_ring::rx_buf_len for ZC is being set via xsk_pool_get_rx_frame_size() and this needs to be propagated up to xdp_rxq_info. Use a bigger hammer and instead of unregistering only xdp_rxq_info's memory model, unregister it altogether and register it again and have xdp_rxq_info with correct frag_size value. Fixes: 1bbc04de607b ("ice: xsk: add RX multi-buffer support") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-9-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-25intel: xsk: initialize skb_frag_t::bv_offset in ZC driversMaciej Fijalkowski2-2/+4
Ice and i40e ZC drivers currently set offset of a frag within skb_shared_info to 0, which is incorrect. xdp_buffs that come from xsk_buff_pool always have 256 bytes of a headroom, so they need to be taken into account to retrieve xdp_buff::data via skb_frag_address(). Otherwise, bpf_xdp_frags_increase_tail() would be starting its job from xdp_buff::data_hard_start which would result in overwriting existing payload. Fixes: 1c9ba9c14658 ("i40e: xsk: add RX multi-buffer support") Fixes: 1bbc04de607b ("ice: xsk: add RX multi-buffer support") Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-8-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-25ice: remove redundant xdp_rxq_info registrationMaciej Fijalkowski1-5/+0
xdp_rxq_info struct can be registered by drivers via two functions - xdp_rxq_info_reg() and __xdp_rxq_info_reg(). The latter one allows drivers that support XDP multi-buffer to set up xdp_rxq_info::frag_size which in turn will make it possible to grow the packet via bpf_xdp_adjust_tail() BPF helper. Currently, ice registers xdp_rxq_info in two spots: 1) ice_setup_rx_ring() // via xdp_rxq_info_reg(), BUG 2) ice_vsi_cfg_rxq() // via __xdp_rxq_info_reg(), OK Cited commit under fixes tag took care of setting up frag_size and updated registration scheme in 2) but it did not help as 1) is called before 2) and as shown above it uses old registration function. This means that 2) sees that xdp_rxq_info is already registered and never calls __xdp_rxq_info_reg() which leaves us with xdp_rxq_info::frag_size being set to 0. To fix this misbehavior, simply remove xdp_rxq_info_reg() call from ice_setup_rx_ring(). Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side") Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-7-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-25i40e: handle multi-buffer packets that are shrunk by xdp progTirthendu Sarkar1-17/+23
XDP programs can shrink packets by calling the bpf_xdp_adjust_tail() helper function. For multi-buffer packets this may lead to reduction of frag count stored in skb_shared_info area of the xdp_buff struct. This results in issues with the current handling of XDP_PASS and XDP_DROP cases. For XDP_PASS, currently skb is being built using frag count of xdp_buffer before it was processed by XDP prog and thus will result in an inconsistent skb when frag count gets reduced by XDP prog. To fix this, get correct frag count while building the skb instead of using pre-obtained frag count. For XDP_DROP, current page recycling logic will not reuse the page but instead will adjust the pagecnt_bias so that the page can be freed. This again results in inconsistent behavior as the page refcnt has already been changed by the helper while freeing the frag(s) as part of shrinking the packet. To fix this, only adjust pagecnt_bias for buffers that are stillpart of the packet post-xdp prog run. Fixes: e213ced19bef ("i40e: add support for XDP multi-buffer Rx") Reported-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-6-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-25ice: work on pre-XDP prog frag countMaciej Fijalkowski3-14/+32
Fix an OOM panic in XDP_DRV mode when a XDP program shrinks a multi-buffer packet by 4k bytes and then redirects it to an AF_XDP socket. Since support for handling multi-buffer frames was added to XDP, usage of bpf_xdp_adjust_tail() helper within XDP program can free the page that given fragment occupies and in turn decrease the fragment count within skb_shared_info that is embedded in xdp_buff struct. In current ice driver codebase, it can become problematic when page recycling logic decides not to reuse the page. In such case, __page_frag_cache_drain() is used with ice_rx_buf::pagecnt_bias that was not adjusted after refcount of page was changed by XDP prog which in turn does not drain the refcount to 0 and page is never freed. To address this, let us store the count of frags before the XDP program was executed on Rx ring struct. This will be used to compare with current frag count from skb_shared_info embedded in xdp_buff. A smaller value in the latter indicates that XDP prog freed frag(s). Then, for given delta decrement pagecnt_bias for XDP_DROP verdict. While at it, let us also handle the EOP frag within ice_set_rx_bufs_act() to make our life easier, so all of the adjustments needed to be applied against freed frags are performed in the single place. Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side") Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-5-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-25xsk: make xsk_buff_pool responsible for clearing xdp_buff::flagsMaciej Fijalkowski2-2/+0
XDP multi-buffer support introduced XDP_FLAGS_HAS_FRAGS flag that is used by drivers to notify data path whether xdp_buff contains fragments or not. Data path looks up mentioned flag on first buffer that occupies the linear part of xdp_buff, so drivers only modify it there. This is sufficient for SKB and XDP_DRV modes as usually xdp_buff is allocated on stack or it resides within struct representing driver's queue and fragments are carried via skb_frag_t structs. IOW, we are dealing with only one xdp_buff. ZC mode though relies on list of xdp_buff structs that is carried via xsk_buff_pool::xskb_list, so ZC data path has to make sure that fragments do *not* have XDP_FLAGS_HAS_FRAGS set. Otherwise, xsk_buff_free() could misbehave if it would be executed against xdp_buff that carries a frag with XDP_FLAGS_HAS_FRAGS flag set. Such scenario can take place when within supplied XDP program bpf_xdp_adjust_tail() is used with negative offset that would in turn release the tail fragment from multi-buffer frame. Calling xsk_buff_free() on tail fragment with XDP_FLAGS_HAS_FRAGS would result in releasing all the nodes from xskb_list that were produced by driver before XDP program execution, which is not what is intended - only tail fragment should be deleted from xskb_list and then it should be put onto xsk_buff_pool::free_list. Such multi-buffer frame will never make it up to user space, so from AF_XDP application POV there would be no traffic running, however due to free_list getting constantly new nodes, driver will be able to feed HW Rx queue with recycled buffers. Bottom line is that instead of traffic being redirected to user space, it would be continuously dropped. To fix this, let us clear the mentioned flag on xsk_buff_pool side during xdp_buff initialization, which is what should have been done right from the start of XSK multi-buffer support. Fixes: 1bbc04de607b ("ice: xsk: add RX multi-buffer support") Fixes: 1c9ba9c14658 ("i40e: xsk: add RX multi-buffer support") Fixes: 24ea50127ecf ("xsk: support mbuf on ZC RX") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-3-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-25net: fill in MODULE_DESCRIPTION()s for rvu_mboxBreno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Marvel RVU mbox driver. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240123190332.677489-11-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25net: fill in MODULE_DESCRIPTION()s for litexBreno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the LiteX Liteeth Ethernet device. Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Gabriel Somlo <gsomlo@gmail.com> Link: https://lore.kernel.org/r/20240123190332.677489-10-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25net: fill in MODULE_DESCRIPTION()s for fsl_pq_mdioBreno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Freescale PQ MDIO driver. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240123190332.677489-9-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25net: fill in MODULE_DESCRIPTION()s for fecBreno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the FEC (MPC8xx) Ethernet controller. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Wei Fang <wei.fang@nxp.com> Link: https://lore.kernel.org/r/20240123190332.677489-8-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25net: fill in MODULE_DESCRIPTION()s for enetcBreno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the NXP ENETC Ethernet driver. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240123190332.677489-7-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25net: fill in MODULE_DESCRIPTION()s for nps_enetBreno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the EZchip NPS ethernet driver. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240123190332.677489-6-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25net: fill in MODULE_DESCRIPTION()s for ep93xxx_ethBreno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Cirrus EP93xx ethernet driver. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240123190332.677489-5-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25net: fill in MODULE_DESCRIPTION()s for liquidioBreno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Cavium Liquidio. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240123190332.677489-4-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25net: fill in MODULE_DESCRIPTION()s for Broadcom bgmacBreno Leitao5-0/+5
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Broadcom iProc GBit driver. Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240123190332.677489-3-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25net: fill in MODULE_DESCRIPTION()s for 8390Breno Leitao6-0/+6
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to all the good old 8390 modules and drivers. Signed-off-by: Breno Leitao <leitao@debian.org> CC: geert@linux-m68k.org Link: https://lore.kernel.org/r/20240123190332.677489-2-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-24net: mvpp2: clear BM pool before initializationJenishkumar Maheshbhai Patel1-1/+26
Register value persist after booting the kernel using kexec which results in kernel panic. Thus clear the BM pool registers before initialisation to fix the issue. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Jenishkumar Maheshbhai Patel <jpatel2@marvell.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://lore.kernel.org/r/20240119035914.2595665-1-jpatel2@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-24net: stmmac: Wait a bit for the reset to take effectBernd Edlinger1-0/+3
otherwise the synopsys_id value may be read out wrong, because the GMAC_VERSION register might still be in reset state, for at least 1 us after the reset is de-asserted. Add a wait for 10 us before continuing to be on the safe side. > From what have you got that delay value? Just try and error, with very old linux versions and old gcc versions the synopsys_id was read out correctly most of the time (but not always), with recent linux versions and recnet gcc versions it was read out wrongly most of the time, but again not always. I don't have access to the VHDL code in question, so I cannot tell why it takes so long to get the correct values, I also do not have more than a few hardware samples, so I cannot tell how long this timeout must be in worst case. Experimentally I can tell that the register is read several times as zero immediately after the reset is de-asserted, also adding several no-ops is not enough, adding a printk is enough, also udelay(1) seems to be enough but I tried that not very often, and I have not access to many hardware samples to be 100% sure about the necessary delay. And since the udelay here is only executed once per device instance, it seems acceptable to delay the boot for 10 us. BTW: my hardware's synopsys id is 0x37. Fixes: c5e4ddbdfa11 ("net: stmmac: Add support for optional reset control") Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/AS8P193MB1285A810BD78C111E7F6AA34E4752@AS8P193MB1285.EURP193.PROD.OUTLOOK.COM Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-24Revert "net: ethernet: qualcomm: Remove QDF24xx support"Jakub Kicinski5-21/+521
This reverts commit a2a7f98aeeec48118fac73c22bd54f8889815e16. Konrad mentioned that Qualcomm appears to use these devices, still, internally, even tho they never made it to the broader market. Link: https://lore.kernel.org/all/0679f568-60e7-47d8-b86e-052a9eb4c103@linaro.org/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-24Merge tag 'fbdev-for-6.8-rc2' of ↵Linus Torvalds5-4/+7
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev fixes and cleanups from Helge Deller: "A crash fix in stifb which was missed to be included in the drm-misc tree, two checks to prevent wrong userspace input in sisfb and savagefb and two trivial printk cleanups: - stifb: Fix crash in stifb_blank() - savage/sis: Error out if pixclock equals zero - minor trivial cleanups" * tag 'fbdev-for-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: stifb: Fix crash in stifb_blank() fbcon: Fix incorrect printed function name in fbcon_prepare_logo() fbdev: sis: Error out if pixclock equals zero fbdev: savage: Error out if pixclock equals zero fbdev: vt8500lcdfb: Remove unnecessary print function dev_err()
2024-01-24net/mlx5e: fix a potential double-free in fs_any_create_groupsDinghao Liu1-0/+1
When kcalloc() for ft->g succeeds but kvzalloc() for in fails, fs_any_create_groups() will free ft->g. However, its caller fs_any_create_table() will free ft->g again through calling mlx5e_destroy_flow_table(), which will lead to a double-free. Fix this by setting ft->g to NULL in fs_any_create_groups(). Fixes: 0f575c20bf06 ("net/mlx5e: Introduce Flow Steering ANY API") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5e: fix a double-free in arfs_create_groupsZhipeng Lu1-11/+15
When `in` allocated by kvzalloc fails, arfs_create_groups will free ft->g and return an error. However, arfs_create_table, the only caller of arfs_create_groups, will hold this error and call to mlx5e_destroy_flow_table, in which the ft->g will be freed again. Fixes: 1cabe6b0965e ("net/mlx5e: Create aRFS flow tables") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5e: Ignore IPsec replay window values on sender sideLeon Romanovsky1-2/+8
XFRM stack doesn't prevent from users to configure replay window in TX side and strongswan sets replay_window to be 1. It causes to failures in validation logic when trying to offload the SA. Replay window is not relevant in TX side and should be ignored. Fixes: cded6d80129b ("net/mlx5e: Store replay window in XFRM attributes") Signed-off-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5e: Allow software parsing when IPsec crypto is enabledLeon Romanovsky1-2/+2
All ConnectX devices have software parsing capability enabled, but it is more correct to set allow_swp only if capability exists, which for IPsec means that crypto offload is supported. Fixes: 2451da081a34 ("net/mlx5: Unify device IPsec capabilities check") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5: Use mlx5 device constant for selecting CQ period mode for ASORahul Rameshbabu1-1/+1
mlx5 devices have specific constants for choosing the CQ period mode. These constants do not have to match the constants used by the kernel software API for DIM period mode selection. Fixes: cdd04f4d4d71 ("net/mlx5: Add support to create SQ and CQ for ASO") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5: DR, Can't go to uplink vport on RX ruleYevgeny Kliteynik1-5/+11
Go-To-Vport action on RX is not allowed when the vport is uplink. In such case, the packet should be dropped. Fixes: 9db810ed2d37 ("net/mlx5: DR, Expose steering action functionality") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Erez Shitrit <erezsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5: DR, Use the right GVMI number for drop actionYevgeny Kliteynik1-0/+1
When FW provides ICM addresses for drop RX/TX, the provided capability is 64 bits that contain its GVMI as well as the ICM address itself. In case of TX DROP this GVMI is different from the GVMI that the domain is operating on. This patch fixes the action to use these GVMI IDs, as provided by FW. Fixes: 9db810ed2d37 ("net/mlx5: DR, Expose steering action functionality") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5: Bridge, fix multicast packets sent to uplinkMoshe Shemesh2-0/+5
To enable multicast packets which are offloaded in bridge multicast offload mode to be sent also to uplink, FTE bit uplink_hairpin_en should be set. Add this bit to FTE for the bridge multicast offload rules. Fixes: 18c2916cee12 ("net/mlx5: Bridge, snoop igmp/mld packets") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5: Fix a WARN upon a callback command failureYishai Hadas1-2/+3
The below WARN [1] is reported once a callback command failed. As a callback runs under an interrupt context, needs to use the IRQ save/restore variant. [1] DEBUG_LOCKS_WARN_ON(lockdep_hardirq_context()) WARNING: CPU: 15 PID: 0 at kernel/locking/lockdep.c:4353 lockdep_hardirqs_on_prepare+0x11b/0x180 Modules linked in: vhost_net vhost tap mlx5_vfio_pci vfio_pci vfio_pci_core vfio_iommu_type1 vfio mlx5_vdpa vringh vhost_iotlb vdpa nfnetlink_cttimeout openvswitch nsh ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle xt_conntrackxt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm mlx5_ib ib_uverbs ib_core fuse mlx5_core CPU: 15 PID: 0 Comm: swapper/15 Tainted: G W 6.7.0-rc4+ #1587 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:lockdep_hardirqs_on_prepare+0x11b/0x180 Code: 00 5b c3 c3 e8 e6 0d 58 00 85 c0 74 d6 8b 15 f0 c3 76 01 85 d2 75 cc 48 c7 c6 04 a5 3b 82 48 c7 c7 f1 e9 39 82 e8 95 12 f9 ff <0f> 0b 5b c3 e8 bc 0d 58 00 85 c0 74 ac 8b 3d c6 c3 76 01 85 ff 75 RSP: 0018:ffffc900003ecd18 EFLAGS: 00010086 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000027 RDX: 0000000000000000 RSI: ffff88885fbdb880 RDI: ffff88885fbdb888 RBP: 00000000ffffff87 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 284e4f5f4e524157 R12: 00000000002c9aa1 R13: ffff88810aace980 R14: ffff88810aace9b8 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff88885fbc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f731436f4c8 CR3: 000000010aae6001 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? __warn+0x81/0x170 ? lockdep_hardirqs_on_prepare+0x11b/0x180 ? report_bug+0xf8/0x1c0 ? handle_bug+0x3f/0x70 ? exc_invalid_op+0x13/0x60 ? asm_exc_invalid_op+0x16/0x20 ? lockdep_hardirqs_on_prepare+0x11b/0x180 ? lockdep_hardirqs_on_prepare+0x11b/0x180 trace_hardirqs_on+0x4a/0xa0 raw_spin_unlock_irq+0x24/0x30 cmd_status_err+0xc0/0x1a0 [mlx5_core] cmd_status_err+0x1a0/0x1a0 [mlx5_core] mlx5_cmd_exec_cb_handler+0x24/0x40 [mlx5_core] mlx5_cmd_comp_handler+0x129/0x4b0 [mlx5_core] cmd_comp_notifier+0x1a/0x20 [mlx5_core] notifier_call_chain+0x3e/0xe0 atomic_notifier_call_chain+0x5f/0x130 mlx5_eq_async_int+0xe7/0x200 [mlx5_core] notifier_call_chain+0x3e/0xe0 atomic_notifier_call_chain+0x5f/0x130 irq_int_handler+0x11/0x20 [mlx5_core] __handle_irq_event_percpu+0x99/0x220 ? tick_irq_enter+0x5d/0x80 handle_irq_event_percpu+0xf/0x40 handle_irq_event+0x3a/0x60 handle_edge_irq+0xa2/0x1c0 __common_interrupt+0x55/0x140 common_interrupt+0x7d/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:default_idle+0x13/0x20 Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 8b 05 ea 08 25 01 85 c0 7e 07 0f 00 2d 7f b0 26 00 fb f4 <fa> c3 90 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 80 d0 02 00 RSP: 0018:ffffc9000010fec8 EFLAGS: 00000242 RAX: 0000000000000001 RBX: 000000000000000f RCX: 4000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff811c410c RBP: ffffffff829478c0 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ? do_idle+0x1ec/0x210 default_idle_call+0x6c/0x90 do_idle+0x1ec/0x210 cpu_startup_entry+0x26/0x30 start_secondary+0x11b/0x150 secondary_startup_64_no_verify+0x165/0x16b </TASK> irq event stamp: 833284 hardirqs last enabled at (833283): [<ffffffff811c410c>] do_idle+0x1ec/0x210 hardirqs last disabled at (833284): [<ffffffff81daf9ef>] common_interrupt+0xf/0xa0 softirqs last enabled at (833224): [<ffffffff81dc199f>] __do_softirq+0x2bf/0x40e softirqs last disabled at (833177): [<ffffffff81178ddf>] irq_exit_rcu+0x7f/0xa0 Fixes: 34f46ae0d4b3 ("net/mlx5: Add command failures data to debugfs") Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5e: Fix peer flow lists handlingVlad Buslov1-1/+2
The cited change refactored mlx5e_tc_del_fdb_peer_flow() to only clear DUP flag when list of peer flows has become empty. However, if any concurrent user holds a reference to a peer flow (for example, the neighbor update workqueue task is updating peer flow's parent encap entry concurrently), then the flow will not be removed from the peer list and, consecutively, DUP flag will remain set. Since mlx5e_tc_del_fdb_peers_flow() calls mlx5e_tc_del_fdb_peer_flow() for every possible peer index the algorithm will try to remove the flow from eswitch instances that it has never peered with causing either NULL pointer dereference when trying to remove the flow peer list head of peer_index that was never initialized or a warning if the list debug config is enabled[0]. Fix the issue by always removing the peer flow from the list even when not releasing the last reference to it. [0]: [ 3102.985806] ------------[ cut here ]------------ [ 3102.986223] list_del corruption, ffff888139110698->next is NULL [ 3102.986757] WARNING: CPU: 2 PID: 22109 at lib/list_debug.c:53 __list_del_entry_valid_or_report+0x4f/0xc0 [ 3102.987561] Modules linked in: act_ct nf_flow_table bonding act_tunnel_key act_mirred act_skbedit vxlan cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa openvswitch nsh xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcg ss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core [last unloaded: bonding] [ 3102.991113] CPU: 2 PID: 22109 Comm: revalidator28 Not tainted 6.6.0-rc6+ #3 [ 3102.991695] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 3102.992605] RIP: 0010:__list_del_entry_valid_or_report+0x4f/0xc0 [ 3102.993122] Code: 39 c2 74 56 48 8b 32 48 39 fe 75 62 48 8b 51 08 48 39 f2 75 73 b8 01 00 00 00 c3 48 89 fe 48 c7 c7 48 fd 0a 82 e8 41 0b ad ff <0f> 0b 31 c0 c3 48 89 fe 48 c7 c7 70 fd 0a 82 e8 2d 0b ad ff 0f 0b [ 3102.994615] RSP: 0018:ffff8881383e7710 EFLAGS: 00010286 [ 3102.995078] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 3102.995670] RDX: 0000000000000001 RSI: ffff88885f89b640 RDI: ffff88885f89b640 [ 3102.997188] DEL flow 00000000be367878 on port 0 [ 3102.998594] RBP: dead000000000122 R08: 0000000000000000 R09: c0000000ffffdfff [ 3102.999604] R10: 0000000000000008 R11: ffff8881383e7598 R12: dead000000000100 [ 3103.000198] R13: 0000000000000002 R14: ffff888139110000 R15: ffff888101901240 [ 3103.000790] FS: 00007f424cde4700(0000) GS:ffff88885f880000(0000) knlGS:0000000000000000 [ 3103.001486] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3103.001986] CR2: 00007fd42e8dcb70 CR3: 000000011e68a003 CR4: 0000000000370ea0 [ 3103.002596] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3103.003190] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3103.003787] Call Trace: [ 3103.004055] <TASK> [ 3103.004297] ? __warn+0x7d/0x130 [ 3103.004623] ? __list_del_entry_valid_or_report+0x4f/0xc0 [ 3103.005094] ? report_bug+0xf1/0x1c0 [ 3103.005439] ? console_unlock+0x4a/0xd0 [ 3103.005806] ? handle_bug+0x3f/0x70 [ 3103.006149] ? exc_invalid_op+0x13/0x60 [ 3103.006531] ? asm_exc_invalid_op+0x16/0x20 [ 3103.007430] ? __list_del_entry_valid_or_report+0x4f/0xc0 [ 3103.007910] mlx5e_tc_del_fdb_peers_flow+0xcf/0x240 [mlx5_core] [ 3103.008463] mlx5e_tc_del_flow+0x46/0x270 [mlx5_core] [ 3103.008944] mlx5e_flow_put+0x26/0x50 [mlx5_core] [ 3103.009401] mlx5e_delete_flower+0x25f/0x380 [mlx5_core] [ 3103.009901] tc_setup_cb_destroy+0xab/0x180 [ 3103.010292] fl_hw_destroy_filter+0x99/0xc0 [cls_flower] [ 3103.010779] __fl_delete+0x2d4/0x2f0 [cls_flower] [ 3103.011207] fl_delete+0x36/0x80 [cls_flower] [ 3103.011614] tc_del_tfilter+0x56f/0x750 [ 3103.011982] rtnetlink_rcv_msg+0xff/0x3a0 [ 3103.012362] ? netlink_ack+0x1c7/0x4e0 [ 3103.012719] ? rtnl_calcit.isra.44+0x130/0x130 [ 3103.013134] netlink_rcv_skb+0x54/0x100 [ 3103.013533] netlink_unicast+0x1ca/0x2b0 [ 3103.013902] netlink_sendmsg+0x361/0x4d0 [ 3103.014269] __sock_sendmsg+0x38/0x60 [ 3103.014643] ____sys_sendmsg+0x1f2/0x200 [ 3103.015018] ? copy_msghdr_from_user+0x72/0xa0 [ 3103.015265] ___sys_sendmsg+0x87/0xd0 [ 3103.016608] ? copy_msghdr_from_user+0x72/0xa0 [ 3103.017014] ? ___sys_recvmsg+0x9b/0xd0 [ 3103.017381] ? ttwu_do_activate.isra.137+0x58/0x180 [ 3103.017821] ? wake_up_q+0x49/0x90 [ 3103.018157] ? futex_wake+0x137/0x160 [ 3103.018521] ? __sys_sendmsg+0x51/0x90 [ 3103.018882] __sys_sendmsg+0x51/0x90 [ 3103.019230] ? exit_to_user_mode_prepare+0x56/0x130 [ 3103.019670] do_syscall_64+0x3c/0x80 [ 3103.020017] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 3103.020469] RIP: 0033:0x7f4254811ef4 [ 3103.020816] Code: 89 f3 48 83 ec 10 48 89 7c 24 08 48 89 14 24 e8 42 eb ff ff 48 8b 14 24 41 89 c0 48 89 de 48 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 30 44 89 c7 48 89 04 24 e8 78 eb ff ff 48 8b [ 3103.022290] RSP: 002b:00007f424cdd9480 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 3103.022970] RAX: ffffffffffffffda RBX: 00007f424cdd9510 RCX: 00007f4254811ef4 [ 3103.023564] RDX: 0000000000000000 RSI: 00007f424cdd9510 RDI: 0000000000000012 [ 3103.024158] RBP: 00007f424cdda238 R08: 0000000000000000 R09: 00007f41d801a4b0 [ 3103.024748] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000001 [ 3103.025341] R13: 00007f424cdd9510 R14: 00007f424cdda240 R15: 00007f424cdd99a0 [ 3103.025931] </TASK> [ 3103.026182] ---[ end trace 0000000000000000 ]--- [ 3103.027033] ------------[ cut here ]------------ Fixes: 9be6c21fdcf8 ("net/mlx5e: Handle offloads flows per peer") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5e: Fix inconsistent hairpin RQT sizesTariq Toukan1-1/+1
The processing of traffic in hairpin queues occurs in HW/FW and does not involve the cpus, hence the upper bound on max num channels does not apply to them. Using this bound for the hairpin RQT max_table_size is wrong. It could be too small, and cause the error below [1]. As the RQT size provided on init does not get modified later, use the same value for both actual and max table sizes. [1] mlx5_core 0000:08:00.1: mlx5_cmd_out_err:805:(pid 1200): CREATE_RQT(0x916) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x538faf), err(-22) Fixes: 74a8dadac17e ("net/mlx5e: Preparations for supporting larger number of channels") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5e: Fix operation precedence bug in port timestamping napi_poll contextRahul Rameshbabu1-1/+1
Indirection (*) is of lower precedence than postfix increment (++). Logic in napi_poll context would cause an out-of-bound read by first increment the pointer address by byte address space and then dereference the value. Rather, the intended logic was to dereference first and then increment the underlying value. Fixes: 92214be5979c ("net/mlx5e: Update doorbell for port timestamping CQ before the software counter") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5: Fix query of sd_group fieldTariq Toukan1-0/+21
The sd_group field moved in the HW spec from the MPIR register to the vport context. Align the query accordingly. Fixes: f5e956329960 ("net/mlx5: Expose Management PCIe Index Register (MPIR)") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5e: Use the correct lag ports number when creating TISesSaeed Mahameed4-11/+16
The cited commit moved the code of mlx5e_create_tises() and changed the loop to create TISes over MLX5_MAX_PORTS constant value, instead of getting the correct lag ports supported by the device, which can cause FW errors on devices with less than MLX5_MAX_PORTS ports. Change that back to mlx5e_get_num_lag_ports(mdev). Also IPoIB interfaces create there own TISes, they don't use the eth TISes, pass a flag to indicate that. This fixes the following errors that might appear in kernel log: mlx5_cmd_out_err:808:(pid 650): CREATE_TIS(0x912) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x595b5d), err(-22) mlx5e_create_mdev_resources:174:(pid 650): alloc tises failed, -22 Fixes: b25bd37c859f ("net/mlx5: Move TISes from priv to mdev HW resources") Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24gve: Alloc before freeing when changing featuresShailend Chand1-20/+21
Previously, existing queues were being freed before the resources for the new queues were being allocated. This would take down the interface if someone were to attempt to change feature flags under a resource crunch. Signed-off-by: Shailend Chand <shailend@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Jeroen de Borst <jeroendb@google.com> Link: https://lore.kernel.org/r/20240122182632.1102721-7-shailend@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-24gve: Alloc before freeing when adjusting queuesShailend Chand1-22/+67
Previously, existing queues were being freed before the resources for the new queues were being allocated. This would take down the interface if someone were to attempt to change queue counts under a resource crunch. Signed-off-by: Shailend Chand <shailend@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Jeroen de Borst <jeroendb@google.com> Link: https://lore.kernel.org/r/20240122182632.1102721-6-shailend@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-24gve: Refactor gve_open and gve_closeShailend Chand1-40/+119
gve_open is rewritten to be composed of two funcs: gve_queues_mem_alloc and gve_queues_start. The former only allocates queue resources without doing anything to install the queues, which is taken up by the latter. Similarly gve_close is split into gve_queues_stop and gve_queues_mem_free. Separating the acts of queue resource allocation and making the queue become live help with subsequent changes that aim to not take down the datapath when applying new configurations. Signed-off-by: Shailend Chand <shailend@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Jeroen de Borst <jeroendb@google.com> Link: https://lore.kernel.org/r/20240122182632.1102721-5-shailend@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-24gve: Switch to config-aware queue allocationShailend Chand9-425/+745
The new config-aware functions will help achieve the goal of being able to allocate resources for new queues while there already are active queues serving traffic. These new functions work off of arbitrary queue allocation configs rather than just the currently active config in priv, and they return the newly allocated resources instead of writing them into priv. Signed-off-by: Shailend Chand <shailend@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Jeroen de Borst <jeroendb@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240122182632.1102721-4-shailend@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-10 14:09:26 +0300