summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-09-20net: hns3: Fix parameter type for q_id in hclge_tm_q_to_qs_map_cfg()Jian Shen1-1/+1
So far all the places calling hclge_tm_q_to_qs_map_cfg() are assigning an u16 type value to "q_id", and in the processing of hclge_tm_q_to_qs_map_cfg(), it also converts the "q_id" to le16. The max tqp number for pf can be more than 256, we should use "u16" to store the queue id, instead of "u8", which may cause data lost. Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: hns3: Fix client initialize state issue when roce client initialize failedJian Shen4-7/+26
When roce is loaded before nic, the roce client will not be initialized until nic client is initialized, but roce init flag is set before it. Furthermore, in this case of nic initialized success and roce failed, the nic init flag is not set, and roce init flag is not cleared. This patch fixes it by set init flag only after the client is initialized successfully. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: hns3: Clear client pointer when initialize client failed or unintialize ↵Jian Shen2-17/+41
finished If initialize client failed or finish uninitializing client, we should clear the client pointer. It may cause unexpected result when use uninitialized client. Meanwhile, we also should check whether client exist when uninitialize it. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: hns3: Fix cmdq registers initialization issue for vfJian Shen1-2/+2
According to hardware's description, the head pointer register should be written before the tail pointer register while initializing the vf command queue. Otherwise, it may trigger an interrupt even though there is no command received. Fixes: fedd0c15d288 ("net: hns3: Add HNS3 VF IMP(Integrated Management Proc) cmd interface") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: hns3: Fix for setting speed for phy failed problemFuyun Liang1-1/+1
The function of genphy_read_status is that reading phy information from HW and using these information to update SW variable. If user is using ethtool to setting the speed of phy and service task is calling by hclge_get_mac_phy_link, the result of speed setting is uncertain. Because ethtool cmd will modified phydev and hclge_get_mac_phy_link also will modified phydev. Because phy state machine will update phy link periodically, we can just use phydev->link to check the link status. This patch removes function call of genphy_read_status. To ensure accuracy, this patch adds a phy state check. If phy state is not PHY_RUNNING, we consider link is down. Because in some scenarios, phydev->link may be link up, but phy state is not PHY_RUNNING. This is just an intermediate state. In fact, the link is not ready yet. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: hns3: Check hdev state when getting link statusPeng Li2-0/+6
By default, HW link status is up. If hclge_update_link_status is called before net up, driver will print "link up". It is not suitable. hdev state check is needed when getting link status. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: hns3: Set STATE_DOWN bit of hdev state when stopping netFuyun Liang2-0/+4
We clear STATE_DOWN bit of hdev state when starting net, but do not set it again when stopping net. It causes that the net is down, but hdev state is still up. STATE_DOWN bit of hdev state should be set when stopping net. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: hns3: Add support for hns3_nic_netdev_ops.ndo_do_ioctlXi Wang3-0/+30
This patch adds the .ndo_do_ioctl net_device_ops operation to support the PHY MII ioctl for PF driver. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: hns3: Remove packet statistics of publicPeng Li2-418/+0
All pf have permission to read packet statistics of public in hardware, but the read operation will clear registers which cause statistical inaccuracy. This patch removes all packet statistics of public. Signed-off-by: Junxin Chen <chenjunxin1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: hns3: Remove tx budget to clean more TX descriptors in a napiPeng Li3-13/+8
The the actual Tx work is minimal, driver can clean up as more Tx descriptors as possible in a irq. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: hns3: Add unlikely for buf_num checkPeng Li1-1/+1
This patch adds unlikely for buf_num check. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: hns3: Add default irq affinityPeng Li2-0/+51
All irq will float to cpu0 if do not set irq affinity. This patch adds default irq affinity in hns3 driver, users can also change the irq affinity in OS. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: sun: fix return type of ndo_start_xmit functionYueHaibing6-13/+17
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: amd: fix return type of ndo_start_xmit functionYueHaibing6-9/+13
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: broadcom: fix return type of ndo_start_xmit functionYueHaibing2-4/+5
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: xilinx: fix return type of ndo_start_xmit functionYueHaibing3-6/+9
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: toshiba: fix return type of ndo_start_xmit functionYueHaibing4-7/+9
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: marvell: fix return type of ndo_start_xmit functionYueHaibing3-3/+4
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: mvneta: do not explicitly set the carrier state in openAntoine Tenart1-3/+0
This patch removes the explicit call to netif_carrier_off() in mvneta_open() as this is already handled in phylink_start(). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: mvpp2: do not explicitly set the carrier state in openAntoine Tenart1-1/+0
This patch removes the explicit call to netif_carrier_off() in PPv2's open() path, as this is now handled in phylink_start(). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: phy: phylink: ensure the carrier is off when starting phylinkAntoine Tenart1-0/+3
Phylink made an assumption about the carrier state being down when calling phylink_start(). If this assumption isn't satisfied, the internal phylink state could misbehave and a net device could end up not being functional. This patch fixes this by explicitly calling netif_carrier_off() in phylink_start(). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: mvpp2: rename mvpp2_percpu function to mvpp2_threadAntoine Tenart1-47/+47
As the mvpp2_percpu_read/write/... functions aren't really per-cpu but per s/w thread, rename them to include 'thread' instead of 'percpu'. This is a cosmetic patch. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: mvpp2: handle cases where more CPUs are available than s/w threadsAntoine Tenart2-54/+112
The Marvell PPv2 network controller has 9 internal threads. The driver works fine when there are less CPUs available than threads. This isn't true if more CPUs are available. As this is a valid use case, handle this particular case. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: mvpp2: map the CPUs to threadsAntoine Tenart2-40/+55
This patch maps all uses of the CPU to threads. All this_cpu calls are replaced, and all smp_processor_id() calls are wrapped into the indirection. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: mvpp2: do not use the CPU number to access the per-thread registersAntoine Tenart1-81/+88
This patch reworks the Marvell PPv2 driver to stop using directly the CPU number to access per-thread registers. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: mvpp2: make mvpp2_read_relaxed staticAntoine Tenart2-3/+1
In the Marvell PPv2 driver the mvpp2_read_relaxed function is only used in a single file. Make it static and remove its prototype from the header. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: mvpp2: make the per-cpu helpers staticAntoine Tenart2-10/+3
The Marvell PPv2 driver has per-cpu functions. As they only are used in the main file, make them static and remove their prototype from the header. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: mvpp2: cpu should always be unsignedAntoine Tenart2-30/+35
Updates the PPv2 driver so that all CPU variables are unsigned, as it makes no sense to have a negative CPU number. This patch is cosmetic. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: mvpp2: fix the number of queues per cpu for PPv2.2Antoine Tenart2-4/+6
The Marvell PPv2.2 engine only has 8 Rx queues per CPU, while PPv2.1 has 16 of them. This patch updates the code so that the Rx queues mask width is selected given the version of the network controller used. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: mvpp2: do not update the queue mode while probingAntoine Tenart1-8/+9
This patch updates the probing function so that the queue mode isn't updated while probing, as the driver would silently end up using a configuration not wanted by the user. The patch adds an extra check to validate the chosen queue mode instead, and the driver will fail to probe if the configuration is invalid. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: mvpp2: rename the IRQs to match the hardwareAntoine Tenart2-15/+46
This patch renames the IRQs in the Marvell PPv2 driver as their current names match the way they are used in software. But this will change in the future, and those IRQs have nothing to do with Rx/Tx interrupts (this can be configured). The new binding also describe more interrupts as some where left out. The old binding support is kept for backward compatibility. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: mvpp2: increase the number of s/w threads to 9Antoine Tenart1-1/+1
This patch sets the number of s/w threads to 9, its maximum value, instead of 8. This is not a fix as only 4 of the s/w threads were used so far, but more could be used in the future. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20ravb: remove tx buffer addr 4byte alilgnment restriction for R-Car Gen3Kazuya Mizuguchi2-57/+92
This patch sets from two descriptor to one descriptor because R-Car Gen3 does not have the 4 bytes alignment restriction of the transmission buffer. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: phy: call state machine synchronously in phy_stopHeiner Kallweit1-0/+2
phy_stop() may be called e.g. when suspending, therefore all needed actions should be performed synchronously. Therefore add a synchronous call to the state machine. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: ti: Use FIELD_SIZEOF directly instead of reimplementing its functionzhong jiang1-3/+3
FIELD_SIZEOF is defined as a macro to calculate the specified value. Therefore, We prefer to use the macro rather than calculating its value. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20net: qede: Use FIELD_SIZEOF directly instead of reimplementing its functionzhong jiang1-1/+1
FIELD_SIZEOF is defined as a macro to calculate the specified value. Therefore, We prefer to use the macro rather than calculating its value. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: wan: remove redundant includezhong jiang2-2/+0
module.h already contained moduleparam.h, so it is safe to remove the redundant include. The issue is detected with the help of Coccinelle. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: ethernet: remove redundant includezhong jiang4-4/+0
module.h already contained moduleparam.h, so it is safe to remove the redundant include. The issue is detected with the help of Coccinelle. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: neterion: vxge: Use linux/io-64-nonatomic-lo-hi.hCorentin Labbe3-20/+2
This patch replace the custom definition of writeq/read and use ones defined in linux/io-64-nonatomic-lo-hi.h. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: neterion: s2io: Use linux/io-64-nonatomic-lo-hi.hCorentin Labbe2-21/+2
This patch replace the custom definition of writeq/read and use ones defined in linux/io-64-nonatomic-lo-hi.h. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: ibm: fix return type of ndo_start_xmit functionYueHaibing3-6/+7
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: cavium: fix return type of ndo_start_xmit functionYueHaibing4-6/+8
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: hns3: fix return type of ndo_start_xmit functionYueHaibing2-2/+3
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, also the implementation in this driver has returns 'netdev_tx_t' value, so just change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: ethernet: slicoss: remove duplicated include from slic.hYueHaibing1-1/+0
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19veth: rename pcpu_vstats as pcpu_lstatsLi RongQing1-14/+8
struct pcpu_vstats and pcpu_lstats have same members and usage, and pcpu_lstats is used in many files, so rename pcpu_vstats as pcpu_lstats to reduce duplicate definition Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19Merge branch '40GbE' of ↵David S. Miller45-9230/+5093
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2018-09-18 This series contains changes to i40evf so that it becomes a more generic virtual function driver for current and future silicon. While doing the rename of i40evf to a more generic name of iavf, we also put the driver on a severe diet due to how much of the code was unneeded or was unused. The outcome is a lean and mean virtual function driver that continues to work on existing 40GbE (i40e) virtual devices and prepped for future supported devices, like the 100GbE (ice) virtual devices. This solves 2 issues we saw coming or were already present, the first was constant code duplication happening with i40e/i40evf, when much of the duplicate code in the i40evf was not used or was not needed. The second was to remove the future confusion of why future VF devices that were not considered "40GbE" only devices were supported by i40evf. The thought is that iavf will be the virtual function driver for all future devices, so it should have a "generic" name to properly represent that it is the VF driver for multiple generations of devices. The last patch in this series is unreleated to the iavf conversion and just has to do with a MODULE_LICENSE correction. Known Caveats: Existing user space configurations may have to change, but the module alias in patch 1 helps a bit here. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19intel-ethernet: use correct module licenseJesse Brandeburg12-13/+13
We recently updated all our SPDX identifiers to correctly indicate our net/ethernet/intel/* drivers were always released and intended to be released under GPL v2, but the MODULE_LICENSE declaration was never updated. Fix the MODULE_LICENSE to be GPL v2, for all our drivers. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-09-19iavf: finish renaming files to iavfJesse Brandeburg16-21/+21
This finishes the process of renaming the files that make sense to rename (skipping adminq related files that talk to i40e), and fixes up the build and the #includes so that everything builds nicely. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-09-19iavf: rename most of i40e stringsJesse Brandeburg17-1407/+1366
This is the big rename patch, it takes most of the i40e_ and I40E_ strings and renames them to iavf_ and IAVF_. Some of the adminq code, as well as most of the client interface code used by RDMA is left unchanged in order to indicate that the driver is talking to non-internal to iavf code. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-09-19iavf: tracing infrastructure renameJesse Brandeburg3-22/+22
Rename the i40e_trace file and fix up all the callers to the new names inside the iavf_trace.h file. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>