| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We currently register the BCMA core even if the GPIO portions
fail. There is no reason for this: the GPIO should register
just fine, if it fails the BCMA driver should fail.
We already gracefully handle the case where the GPIO driver is
not compiled in.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221028093000.239020-1-linus.walleij@linaro.org
|
|
The <linux/bcma/bcma_driver_chipcommon.h> is including the legacy
header <linux/gpio.h> to obtain struct gpio_chip. Instead, include
<linux/gpio/driver.h> where this struct is defined.
It turns out that the brcm80211 brcmsmac depends on this to
bring in the symbol gpio_is_valid().
The driver looks up the BCMA parent GPIO driver and checks that
this succeeds, but then it goes on to use the deprecated GPIO
call gpio_is_valid() to check the consistency of the .base
member of the BCMA GPIO struct. The whole check can be dropped
because the bcma_gpio is initialized in the declarations:
struct gpio_chip *bcma_gpio = &cc_drv->gpio;
And this can never be NULL.
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221028092332.238728-1-linus.walleij@linaro.org
|
|
This patch fixes a shift-out-of-bounds in brcmfmac that occurs in
BIT(chiprev) when a 'chiprev' provided by the device is too large.
It should also not be equal to or greater than BITS_PER_TYPE(u32)
as we do bitwise AND with a u32 variable and BIT(chiprev). The patch
adds a check that makes the function return NULL if that is the case.
Note that the NULL case is later handled by the bus-specific caller,
brcmf_usb_probe_cb() or brcmf_usb_reset_resume(), for example.
Found by a modified version of syzkaller.
UBSAN: shift-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
shift exponent 151055786 is too large for 64-bit type 'long unsigned int'
CPU: 0 PID: 1885 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
dump_stack_lvl+0x57/0x7d
ubsan_epilogue+0x5/0x40
__ubsan_handle_shift_out_of_bounds.cold+0x53/0xdb
? lock_chain_count+0x20/0x20
brcmf_fw_alloc_request.cold+0x19/0x3ea
? brcmf_fw_get_firmwares+0x250/0x250
? brcmf_usb_ioctl_resp_wait+0x1a7/0x1f0
brcmf_usb_get_fwname+0x114/0x1a0
? brcmf_usb_reset_resume+0x120/0x120
? number+0x6c4/0x9a0
brcmf_c_process_clm_blob+0x168/0x590
? put_dec+0x90/0x90
? enable_ptr_key_workfn+0x20/0x20
? brcmf_common_pd_remove+0x50/0x50
? rcu_read_lock_sched_held+0xa1/0xd0
brcmf_c_preinit_dcmds+0x673/0xc40
? brcmf_c_set_joinpref_default+0x100/0x100
? rcu_read_lock_sched_held+0xa1/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? lock_acquire+0x19d/0x4e0
? find_held_lock+0x2d/0x110
? brcmf_usb_deq+0x1cc/0x260
? mark_held_locks+0x9f/0xe0
? lockdep_hardirqs_on_prepare+0x273/0x3e0
? _raw_spin_unlock_irqrestore+0x47/0x50
? trace_hardirqs_on+0x1c/0x120
? brcmf_usb_deq+0x1a7/0x260
? brcmf_usb_rx_fill_all+0x5a/0xf0
brcmf_attach+0x246/0xd40
? wiphy_new_nm+0x1476/0x1d50
? kmemdup+0x30/0x40
brcmf_usb_probe+0x12de/0x1690
? brcmf_usbdev_qinit.constprop.0+0x470/0x470
usb_probe_interface+0x25f/0x710
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
? usb_match_id.part.0+0x88/0xc0
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
? driver_allows_async_probing+0x120/0x120
bus_for_each_drv+0x123/0x1a0
? bus_rescan_devices+0x20/0x20
? lockdep_hardirqs_on_prepare+0x273/0x3e0
? trace_hardirqs_on+0x1c/0x120
__device_attach+0x207/0x330
? device_bind_driver+0xb0/0xb0
? kobject_uevent_env+0x230/0x12c0
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
? __mutex_unlock_slowpath+0xe7/0x660
? __fw_devlink_link_to_suppliers+0x550/0x550
usb_set_configuration+0x984/0x1770
? kernfs_create_link+0x175/0x230
usb_generic_driver_probe+0x69/0x90
usb_probe_device+0x9c/0x220
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
? driver_allows_async_probing+0x120/0x120
bus_for_each_drv+0x123/0x1a0
? bus_rescan_devices+0x20/0x20
? lockdep_hardirqs_on_prepare+0x273/0x3e0
? trace_hardirqs_on+0x1c/0x120
__device_attach+0x207/0x330
? device_bind_driver+0xb0/0xb0
? kobject_uevent_env+0x230/0x12c0
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
? __fw_devlink_link_to_suppliers+0x550/0x550
usb_new_device.cold+0x463/0xf66
? hub_disconnect+0x400/0x400
? _raw_spin_unlock_irq+0x24/0x30
hub_event+0x10d5/0x3330
? hub_port_debounce+0x280/0x280
? __lock_acquire+0x1671/0x5790
? wq_calc_node_cpumask+0x170/0x2a0
? lock_release+0x640/0x640
? rcu_read_lock_sched_held+0xa1/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? lockdep_hardirqs_on_prepare+0x273/0x3e0
process_one_work+0x873/0x13e0
? lock_release+0x640/0x640
? pwq_dec_nr_in_flight+0x320/0x320
? rwlock_bug.part.0+0x90/0x90
worker_thread+0x8b/0xd10
? __kthread_parkme+0xd9/0x1d0
? process_one_work+0x13e0/0x13e0
kthread+0x379/0x450
? _raw_spin_unlock_irq+0x24/0x30
? set_kthread_struct+0x100/0x100
ret_from_fork+0x1f/0x30
Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221024071329.504277-1-linuxlovemin@yonsei.ac.kr
|
|
There are no SDIO module aliases included in the driver, therefore,
module autoloading isn't working. Add the proper MODULE_DEVICE_TABLE().
Cc: stable@vger.kernel.org
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221027171221.491937-1-michael@walle.cc
|
|
Fix the atmel_private_handler to correctly sized (1 element) again. (I
should have checked the data segment for differences.) This had no
behavioral impact (no private callbacks), but it made a very large
zero-filled array.
Cc: Simon Kelley <simon@thekelleys.org.uk>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Fixes: 8af9d4068e86 ("wifi: atmel: Avoid clashing function prototypes")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221018023732.never.700-kees@kernel.org
|
|
The function ipw_alive() is defined in the ipw2200.c file, but not called
elsewhere, so delete this unused function.
drivers/net/wireless/intel/ipw2x00/ipw2200.c:3007:19: warning: unused function 'ipw_alive'.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2410
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221017071746.118685-1-jiapeng.chong@linux.alibaba.com
|
|
Ther is a spelling mistake in a rtw89_debug message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221020072646.1513307-1-colin.i.king@gmail.com
|
|
Pattern match is an option of WoWLAN to allow the device to be woken up
from suspend mode when receiving packets matched user-designed patterns.
The patterns are written into hardware via WoWLAN firmware in suspend
flow if users have set up them. If packets matched designed pattern are
received, WoWLAN firmware will send an interrupt and then wake up the
device.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221027052707.14605-8-pkshih@realtek.com
|
|
WoWLAN is a feature which allows devices to be woken up from suspend
state through WLAN events.
When user enables WoWLAN feature and then let the device enter suspend
state, WoWLAN firmware will be loaded by the driver and periodically
monitors WiFi packets. Power consumption of WiFi chip will be reduced
in this state.
We now implement WoWLAN function in rtw8852ae and rtw8852ce chip.
Currently supported WLAN events include receiving magic packet,
rekey packet and deauth packet, and disconnecting from AP.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221027052707.14605-7-pkshih@realtek.com
|
|
In this patch we define some H2C, which will be called during suspend
flow, to enable WoWLAN function provided by WoWLAN firmware.
These H2C includes keep alive used to send null packet to AP periodically
to avoid being disconnected by AP, disconnect detection used to configure
how we check if AP is offline, wake up control used to decide which WiFi
events could trigger resume flow, and global control used to enable WoWLAN
function.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221027052707.14605-6-pkshih@realtek.com
|
|
When entering WoWLAN mode, we need to drop all transmit packets,
including those in mac buffer, to avoid memory leakage, so implement
the drop_tx function.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221027052707.14605-5-pkshih@realtek.com
|
|
PLE RX quota, which is the setting of RX buffer, is needed to be adjusted
dynamically for WoWLAN mode, and restored when back to normal mode.
The action is not needed for rtw8852c chip.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221027052707.14605-4-pkshih@realtek.com
|
|
For WoWLAN mode, we need to download WoWLAN firmware by calling
fw_download(). Another, to disable/enable WiFi CPU is needed before
calling fw_download. Since Firmware runs on WiFi CPU, it is intuitive
to combine enable_cpu/disable_cpu functions into fw_download.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221027052707.14605-3-pkshih@realtek.com
|
|
For WoWLAN mode, we only collect and send RF parameters to Firmware
without writing RF registers. So we add one function to practice it.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221027052707.14605-2-pkshih@realtek.com
|
|
Add boundary check of mac_id when adding sta under AP/TDLS.
And, return -ENOSPC if the acquired mac_id is invalid.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221021091828.40157-1-pkshih@realtek.com
|
|
In order to debug performance issue intuitively, add bandwidth information
into debugfs entry phy_info. After applying this patch, it looks like:
TX rate [0]: HE 2SS MCS-11 GI:0.8 BW:80 (hw_rate=0x19b) ==> agg_wait=1 (3500)
RX rate [0]: HE 2SS MCS-9 GI:0.8 BW:80 (hw_rate=0x199)
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221021091601.39884-1-pkshih@realtek.com
|
|
This table must be constant, so change it as expectation.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221020052702.33988-2-pkshih@realtek.com
|
|
They are just default declarations and we won't modify them directly.
Instead, we actually do moification on their memdup now. So, they
should be declared with const.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221020052702.33988-1-pkshih@realtek.com
|
|
Since firmware size is limited, we create variant firmwares for variant
application areas. To help driver to know firmware's capabilities, firmware
dynamic header is introduced to have more information, such as firmware
features and firmware compile flags.
Since this driver rtw89 only uses single one specific firmware at runtime,
this patch is just to ignore this dynamic header, not actually use the
content.
This patch can be backward compatible, and no this kind of firmware is
added to linux-firmware yet, so I can prepare this in advance.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221020052549.33783-1-pkshih@realtek.com
|
|
ath.git patches for v6.2. Major changes:
ath11k
* support configuring channel dwell time during scan
|
|
In the event of a Tx hang it can be useful to read a variety of hardware
registers to capture some state about why the transmit queue got stuck.
Extend the ETHTOOL_GREGS dump provided by the ice driver with several CSR
registers that provide such relevant information regarding the hardware Tx
state. This enables capturing relevant data to enable debugging such a Tx
hang.
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Link: https://lore.kernel.org/r/20221027104239.1691549-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As a result of help from Frank Wunderlich to investigate and test, we
now know how to program this PCS for in-band 802.3z negotiation. Add
support for this by moving the contents of the two functions into the
common mtk_pcs_config() function and adding the register settings for
802.3z negotiation.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Program the link timer appropriately for the interface mode being
used, using the newly introduced phylink helper that provides the
nanosecond link timer interval.
The intervals are 1.6ms for SGMII based protocols and 10ms for
802.3z based protocols.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Program the advertisement into the mtk PCS block.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the selection of the underlying interface speed to the pcs_config
function, so we always program the interface speed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PHY power up is common to both configuration paths, so move it into
the parent function. We need to do this for all serdes modes.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for forcing the link speed and duplex setting in the
pcs_link_up() method for out of band modes, which will be useful when
we finish converting the pcs_config() method. Until then, we still have
to force duplex for 802.3z modes to work correctly.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mtk_sgmii does a lot of read-modify-write operations, for which there
is a specific regmap function. Use this function instead of open-coding
the operations.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a pcs_get_state() implementation which uses the advertisements
to compute the resulting link modes, and BMSR contents to determine
negotiation and link status.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The functions called by the pcs_config() method always return zero, so
there is no point trying to handle an error from these functions. Make
these functions void, eliminate the "err" variable and simply return
zero from the pcs_config() function itself.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As a result of help from Frank Wunderlich to investigate and test, we
know a bit more about the PCS on the Mediatek platforms. Update the
definitions from this investigation.
This PCS appears similar, but not identical to the Lynx PCS.
Although not included in this patch, but for future reference, the PHY
ID registers at offset 4 read as 0x4d544950 'MTIP'.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the 32bit UP oddity is gone and 32bit uses always a sequence
count, there is no need for the fetch_irq() variants anymore.
Convert to the regular interface.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
====================
pull-request: wireless-next-2022-10-28
First set of patches v6.2. mac80211 refactoring continues for Wi-Fi 7.
All mac80211 driver are now converted to use internal TX queues, this
might cause some regressions so we wanted to do this early in the
cycle.
Note: wireless tree was merged[1] to wireless-next to avoid some
conflicts with mac80211 patches between the trees. Unfortunately there
are still two smaller conflicts in net/mac80211/util.c which Stephen
also reported[2]. In the first conflict initialise scratch_len to
"params->scratch_len ?: 3 * params->len" (note number 3, not 2!) and
in the second conflict take the version which uses elems->scratch_pos.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git/commit/?id=dfd2d876b3fda1790bc0239ba4c6967e25d16e91
[2] https://lore.kernel.org/all/20221020032340.5cf101c0@canb.auug.org.au/
mac80211
- preparation for Wi-Fi 7 Multi-Link Operation (MLO) continues
- add API to show the link STAs in debugfs
- all mac80211 drivers are now using mac80211 internal TX queues (iTXQs)
rtw89
- support 8852BE
rtl8xxxu
- support RTL8188FU
brmfmac
- support two station interfaces concurrently
bcma
- support SPROM rev 11
====================
Link: https://lore.kernel.org/r/20221028132943.304ECC433B5@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During firmware recovery, the monitor interface is not
getting created in the driver and firmware since
the respective flags are not updated properly.
So after firmware recovery is successful, when monitor
interface is brought down manually, firmware assertion
is observed, since we are trying to bring down the
interface which is not yet created in the firmware.
Fix this by updating the monitor flags properly per
phy#, during firmware recovery.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Signed-off-by: Nagarajan Maran <quic_nmaran@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221014155054.11471-1-quic_nmaran@quicinc.com
|
|
Because we enable the clock immediately after acquiring it in probe,
we can combine the 2 operations and use devm_clk_get_optional_enabled()
helper.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add MAC address related operations, and register netdev.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reset and initialize the hardware by configuring the MAC layer.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Get PCI config space info, set LAN id and check flash status.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for MDI-X status and configuration for GPY211 chips
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
gpy_update_interface() is called from gpy_read_status() which does
return error codes. gpy_read_status() would benefit from returning
-EINVAL, etc.
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
./drivers/net/ethernet/freescale/dpaa2/dpaa2-xsk.c:453:42-47: WARNING: conversion to bool not needed here
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2577
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221026051824.38730-1-yang.lee@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The same pre-work code is used before each call to
ionic_rx_fill(), so bring it in and make it a part of
the routine.
Signed-off-by: Neel Patel <neel@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support stateless offloads for GRE, VXLAN, GENEVE, IPXIP4
and IPXIP6 when the FW supports them.
Signed-off-by: Neel Patel <neel@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A new ionic dev_cmd is added to the interface in ionic_if.h,
with a new capabilities field in the ionic device identity to
signal its availability in the FW. The identity level code is
incremented to '2' to show support for this new capabilities
bitfield.
If the driver has indicated with the new identity level that
it has the VF_CTRL command, newer FW will wait for the start
command before starting the VFs after a FW update or crash
recovery.
This patch updates the driver to make use of the new VF start
control in fw_up path to be sure that the PF has set the user
attributes on the VF before the FW allows the VFs to restart.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Report the current FW values for the VF attributes, but don't
save the FW values locally, only save the vf attributes that
are given to us from the user. This allows us to replay user
data, and doesn't end up confusing things like "who set the
mac address".
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The VF attributes that the user has set into the FW through
the PF can be lost over a FW crash recovery. Much like we
already replay the PF mac/vlan filters, we now add a replay
in the recovery path to be sure the FW has the up-to-date
VF configurations.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
2871edb32f46 ("can: kvaser_usb: Fix possible completions during init_completion")
abb8670938b2 ("can: kvaser_usb_leaf: Ignore stale bus-off after start")
8d21f5927ae6 ("can: kvaser_usb_leaf: Fix improved state not being reported")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from 802.15.4 (Zigbee et al).
Current release - regressions:
- ipa: fix bugs in the register conversion for IPA v3.1 and v3.5.1
Current release - new code bugs:
- mptcp: fix abba deadlock on fastopen
- eth: stmmac: rk3588: allow multiple gmac controllers in one system
Previous releases - regressions:
- ip: rework the fix for dflt addr selection for connected nexthop
- net: couple more fixes for misinterpreting bits in struct page
after the signature was added
Previous releases - always broken:
- ipv6: ensure sane device mtu in tunnels
- openvswitch: switch from WARN to pr_warn on a user-triggerable path
- ethtool: eeprom: fix null-deref on genl_info in dump
- ieee802154: more return code fixes for corner cases in
dgram_sendmsg
- mac802154: fix link-quality-indicator recording
- eth: mlx5: fixes for IPsec, PTP timestamps, OvS and conntrack
offload
- eth: fec: limit register access on i.MX6UL
- eth: bcm4908_enet: update TX stats after actual transmission
- can: rcar_canfd: improve IRQ handling for RZ/G2L
Misc:
- genetlink: piggy back on the newly added resv_op_start to enforce
more sanity checks on new commands"
* tag 'net-6.1-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
net: enetc: survive memory pressure without crashing
kcm: do not sense pfmemalloc status in kcm_sendpage()
net: do not sense pfmemalloc status in skb_append_pagefrags()
net/mlx5e: Fix macsec sci endianness at rx sa update
net/mlx5e: Fix wrong bitwise comparison usage in macsec_fs_rx_add_rule function
net/mlx5e: Fix macsec rx security association (SA) update/delete
net/mlx5e: Fix macsec coverity issue at rx sa update
net/mlx5: Fix crash during sync firmware reset
net/mlx5: Update fw fatal reporter state on PCI handlers successful recover
net/mlx5e: TC, Fix cloned flow attr instance dests are not zeroed
net/mlx5e: TC, Reject forwarding from internal port to internal port
net/mlx5: Fix possible use-after-free in async command interface
net/mlx5: ASO, Create the ASO SQ with the correct timestamp format
net/mlx5e: Update restore chain id for slow path packets
net/mlx5e: Extend SKB room check to include PTP-SQ
net/mlx5: DR, Fix matcher disconnect error flow
net/mlx5: Wait for firmware to enable CRS before pci_restore_state
net/mlx5e: Do not increment ESN when updating IPsec ESN state
netdevsim: remove dir in nsim_dev_debugfs_init() when creating ports dir failed
netdevsim: fix memory leak in nsim_drv_probe() when nsim_dev_resources_register() failed
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"A bunch of patches addressing issues in the vivid driver and adding
new checks in V4L2 to validate the input parameters from some ioctls"
* tag 'media/v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: vivid.rst: loop_video is set on the capture devnode
media: vivid: set num_in/outputs to 0 if not supported
media: vivid: drop GFP_DMA32
media: vivid: fix control handler mutex deadlock
media: videodev2.h: V4L2_DV_BT_BLANKING_HEIGHT should check 'interlaced'
media: v4l2-dv-timings: add sanity checks for blanking values
media: vivid: dev->bitmap_cap wasn't freed in all cases
media: vivid: s_fbuf: add more sanity checks
|
|
Under memory pressure, enetc_refill_rx_ring() may fail, and when called
during the enetc_open() -> enetc_setup_rxbdr() procedure, this is not
checked for.
An extreme case of memory pressure will result in exactly zero buffers
being allocated for the RX ring, and in such a case it is expected that
hardware drops all RX packets due to lack of buffers.
This does not happen, because the reset-default value of the consumer
and produces index is 0, and this makes the ENETC think that all buffers
have been initialized and that it owns them (when in reality none were).
The hardware guide explains this best:
| Configure the receive ring producer index register RBaPIR with a value
| of 0. The producer index is initially configured by software but owned
| by hardware after the ring has been enabled. Hardware increments the
| index when a frame is received which may consume one or more BDs.
| Hardware is not allowed to increment the producer index to match the
| consumer index since it is used to indicate an empty condition. The ring
| can hold at most RBLENR[LENGTH]-1 received BDs.
|
| Configure the receive ring consumer index register RBaCIR. The
| consumer index is owned by software and updated during operation of the
| of the BD ring by software, to indicate that any receive data occupied
| in the BD has been processed and it has been prepared for new data.
| - If consumer index and producer index are initialized to the same
| value, it indicates that all BDs in the ring have been prepared and
| hardware owns all of the entries.
| - If consumer index is initialized to producer index plus N, it would
| indicate N BDs have been prepared. Note that hardware cannot start if
| only a single buffer is prepared due to the restrictions described in
| (2).
| - Software may write consumer index to match producer index anytime
| while the ring is operational to indicate all received BDs prior have
| been processed and new BDs prepared for hardware.
Normally, the value of rx_ring->rcir (consumer index) is brought in sync
with the rx_ring->next_to_use software index, but this only happens if
page allocation ever succeeded.
When PI==CI==0, the hardware appears to receive frames and write them to
DMA address 0x0 (?!), then set the READY bit in the BD.
The enetc_clean_rx_ring() function (and its XDP derivative) is naturally
not prepared to handle such a condition. It will attempt to process
those frames using the rx_swbd structure associated with index i of the
RX ring, but that structure is not fully initialized (enetc_new_page()
does all of that). So what happens next is undefined behavior.
To operate using no buffer, we must initialize the CI to PI + 1, which
will block the hardware from advancing the CI any further, and drop
everything.
The issue was seen while adding support for zero-copy AF_XDP sockets,
where buffer memory comes from user space, which can even decide to
supply no buffers at all (example: "xdpsock --txonly"). However, the bug
is present also with the network stack code, even though it would take a
very determined person to trigger a page allocation failure at the
perfect time (a series of ifup/ifdown under memory pressure should
eventually reproduce it given enough retries).
Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20221027182925.3256653-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
